From 101f545ad020e0f336bbbfd1f5fb343fc0dcd7de Mon Sep 17 00:00:00 2001
From: paul <paul@idefix.freepascal.org>
Date: Fri, 31 Dec 2010 02:31:51 +0000
Subject: [PATCH] compiler: don't allow generic object types
(interfaces,dispinterfaces,objclasses,...) to have type,var,const sections if
regular object types don't have them. currently only objects, classes and
records are allowed to have nested type,var,const sections.
git-svn-id: trunk@16669 -
---
compiler/msg/errord.msg | 4 +-
compiler/msg/errordu.msg | 4 +-
compiler/msg/errore.msg | 4 +-
compiler/msgidx.inc | 4 +-
compiler/msgtxt.inc | 450 ++++++++++++++++++++-------------------
compiler/pdecobj.pas | 19 +-
compiler/pdecvar.pas | 16 +-
7 files changed, 247 insertions(+), 254 deletions(-)
diff --git a/compiler/msg/errord.msg b/compiler/msg/errord.msg
index 243672313f..e72f8f9efc 100644
--- a/compiler/msg/errord.msg
+++ b/compiler/msg/errord.msg
@@ -1117,9 +1117,9 @@ parser_e_packed_element_no_loop=03223_E_Bit packed Array-Elemente und Record-Fel
% (or as \var{packed} in any mode with \var{\{\$bitpacking on\}}), it will
% be packed at the bit level. For performance reasons, they cannot be
% used as loop variables.
-parser_e_type_var_const_only_in_generics_and_classes=03224_E_VAR, TYPE und CONST sind nur innerhalb "generics" und Klassen erlaubt
+parser_e_type_var_const_only_in_records_and_classes=03224_E_VAR, TYPE und CONST sind nur innerhalb records, objects und Klassen erlaubt
% The usage of VAR, TYPE and CONST to declare new types inside an object is allowed only inside
-% generics and classes.
+% records, objects and classes.
parser_e_cant_create_generics_of_this_type=03225_E_Dieser Typ kann nicht "generic" sein
% Only Classes, Objects, Interfaces and Records are allowed to be used as generic.
parser_w_no_lineinfo_use_switch=03226_W_Die LINEINFO Unit nicht manuell laden. Verwende statt dessen den Compilerschalter -gl
diff --git a/compiler/msg/errordu.msg b/compiler/msg/errordu.msg
index 8725886c2e..da24ad10fb 100644
--- a/compiler/msg/errordu.msg
+++ b/compiler/msg/errordu.msg
@@ -1117,9 +1117,9 @@ parser_e_packed_element_no_loop=03223_E_Bit packed Array-Elemente und Record-Fel
% (or as \var{packed} in any mode with \var{\{\$bitpacking on\}}), it will
% be packed at the bit level. For performance reasons, they cannot be
% used as loop variables.
-parser_e_type_var_const_only_in_generics_and_classes=03224_E_VAR, TYPE und CONST sind nur innerhalb "generics" und Klassen erlaubt
+parser_e_type_var_const_only_in_records_and_classes=03224_E_VAR, TYPE und CONST sind nur innerhalb records, objects und Klassen erlaubt
% The usage of VAR, TYPE and CONST to declare new types inside an object is allowed only inside
-% generics and classes.
+% records, objects and classes.
parser_e_cant_create_generics_of_this_type=03225_E_Dieser Typ kann nicht "generic" sein
% Only Classes, Objects, Interfaces and Records are allowed to be used as generic.
parser_w_no_lineinfo_use_switch=03226_W_Die LINEINFO Unit nicht manuell laden. Verwende statt dessen den Compilerschalter -gl
diff --git a/compiler/msg/errore.msg b/compiler/msg/errore.msg
index 244c188357..d4385d39f7 100644
--- a/compiler/msg/errore.msg
+++ b/compiler/msg/errore.msg
@@ -1106,9 +1106,9 @@ parser_e_packed_element_no_loop=03223_E_Bit packed array elements and record fie
% (or as \var{packed} in any mode with \var{\{\$bitpacking on\}}), it will
% be packed at the bit level. For performance reasons, they cannot be
% used as loop variables.
-parser_e_type_var_const_only_in_generics_and_classes=03224_E_VAR, TYPE and CONST are allowed only in generics and classes
+parser_e_type_var_const_only_in_records_and_classes=03224_E_VAR, TYPE and CONST are allowed only in records, objects and classes
% The usage of VAR, TYPE and CONST to declare new types inside an object is allowed only inside
-% generics and classes.
+% records, objects and classes.
parser_e_cant_create_generics_of_this_type=03225_E_This type can't be a generic
% Only Classes, Objects, Interfaces and Records are allowed to be used as generic.
parser_w_no_lineinfo_use_switch=03226_W_Don't load LINEINFO unit manually, Use the -gl compiler switch instead
diff --git a/compiler/msgidx.inc b/compiler/msgidx.inc
index 627a80aa4e..794182e4c5 100644
--- a/compiler/msgidx.inc
+++ b/compiler/msgidx.inc
@@ -313,7 +313,7 @@ const
parser_e_packed_element_no_var_addr=03221;
parser_e_packed_dynamic_open_array=03222;
parser_e_packed_element_no_loop=03223;
- parser_e_type_var_const_only_in_generics_and_classes=03224;
+ parser_e_type_var_const_only_in_records_and_classes=03224;
parser_e_cant_create_generics_of_this_type=03225;
parser_w_no_lineinfo_use_switch=03226;
parser_e_no_funcret_specified=03227;
@@ -877,7 +877,7 @@ const
option_info=11024;
option_help_pages=11025;
- MsgTxtSize = 58270;
+ MsgTxtSize = 58278;
MsgIdxMax : array[1..20] of longint=(
24,88,304,97,82,54,111,22,202,63,
diff --git a/compiler/msgtxt.inc b/compiler/msgtxt.inc
index 23c537a109..c18fafc626 100644
--- a/compiler/msgtxt.inc
+++ b/compiler/msgtxt.inc
@@ -359,521 +359,522 @@ const msgtxt : array[0..000242,1..240] of char=(
'03222_E_D','ynamic arrays cannot be packed'#000+
'03223_E_Bit packed array elements and record fields cannot be used as '+
'loop variables'#000+
- '03224_E_VAR, TYPE and CONST are allowed only in generics and classes'#000+
+ '03224_E_VAR, TYPE and CONST are allowed only in records, objects and c'+
+ 'lasses'#000+
'03225_E_This type can'#039't be a generic'#000+
- '03226_W_Don'#039't load',' LINEINFO unit manually, Use the -gl compiler '+
+ '03226_W_Do','n'#039't load LINEINFO unit manually, Use the -gl compiler '+
'switch instead'#000+
'03227_E_No function result type specified for function "$1"'#000+
'03228_E_Specialization is only supported for generic types'#000+
- '03229_E_Generics can'#039't be used as parameters when specializi','ng g'+
+ '03229_E_Generics can'#039't be used as parameters when sp','ecializing g'+
'enerics'#000+
'03230_E_Constants of objects containing a VMT aren'#039't allowed'#000+
'03231_E_Taking the address of labels defined outside the current scope'+
' isn'#039't allowed'#000+
'03233_E_Cannot initialize variables declared as external'#000+
- '03234_E_Illegal function ','result type'#000+
+ '03234_E_Illegal f','unction result type'#000+
'03235_E_No common type possible between "$1" and "$2"'#000+
'03236_E_Generics without specialization cannot be used as a type for a'+
' variable'#000+
'03237_W_Register list is ignored for pure assembler routines'#000+
- '03238_E_Implements property must ','have class or interface type'#000+
+ '03238_E_Implements proper','ty must have class or interface type'#000+
'03239_E_Implements-property must implement interface of correct type, '+
'found "$1" expected "$2"'#000+
'03240_E_Implements-property must have read specifier'#000+
- '03241_E_Implements-property must not have write-specifier'#000+
- '03242','_E_Implements-property must not have stored-specifier'#000+
+ '03241_E_Implements-property must not have write-specifi','er'#000+
+ '03242_E_Implements-property must not have stored-specifier'#000+
'03243_E_Implements-property used on unimplemented interface: "$1"'#000+
'03244_E_Floating point not supported for this target'#000+
'03245_E_Class "$1" does not implement interface "$2"'#000+
- '03246_E_Type u','sed by implements must be an interface'#000+
+ '03246_','E_Type used by implements must be an interface'#000+
'03247_E_Variables cannot be exported with a different name on this tar'+
'get, add the name to the declaration using the "export" directive (var'+
'iable name: $1, declared export name: $2)'#000+
- '03248_E_Weak extern','al symbols are not supported for the current targ'+
+ '03248_E_Wea','k external symbols are not supported for the current targ'+
'et'#000+
'03249_E_Forward type definition does not match'#000+
'03250_N_Virtual method "$1" has a lower visibility ($2) than parent cl'+
'ass $3 ($4)'#000+
- '03251_E_Fields cannot appear after a method or property def','inition, '+
+ '03251_E_Fields cannot appear after a method or prop','erty definition, '+
'start a new visibility section first'#000+
'03252_E_Parameters or result types cannot contain local type definitio'+
'ns. Use a separate type definition in a type block.'#000+
'03253_E_ABSTRACT and SEALED conflict'#000+
- '03254_E_Cannot create a descendant ','of the sealed class "$1"'#000+
+ '03254_E_Cannot create a des','cendant of the sealed class "$1"'#000+
'03255_E_SEALED class cannot have an ABSTRACT method'#000+
'03256_E_Only virtual methods can be final'#000+
'03257_E_Final method cannot be overridden: "$1"'#000+
'03258_E_Only one message can be used per method.'#000+
- '03259_E_Invalid enumerat','or identifier: "$1"'#000+
+ '03259_E_Invalid ','enumerator identifier: "$1"'#000+
'03260_E_Enumerator identifier required'#000+
'03261_E_Enumerator MoveNext pattern method is not valid. Method must b'+
'e a function with the Boolean return type and no required arguments.'#000+
- '03262_E_Enumerator Current pattern propert','y is not valid. Property m'+
+ '03262_E_Enumerator Current pattern',' property is not valid. Property m'+
'ust have a getter.'#000+
'03263_E_Only one enumerator MoveNext method is allowed per class/objec'+
't'#000+
'03264_E_Only one enumerator Current property is allowed per class/obje'+
'ct'#000+
- '03265_E_For in loop cannot be used for the type "$','1"'#000+
+ '03265_E_For in loop cannot be used for the',' type "$1"'#000+
'03266_E_Objective-C messages require their Objective-C selector name t'+
'o be specified using the "message" directive.'#000+
'03267_E_Objective-C does not have formal constructors nor destructors.'+
- ' Use the alloc, initXXX and dealloc messages.'#000+
- '03268','_E_Message name is too long (max. 255 characters)'#000+
+ ' Use the alloc, initXXX and dealloc message','s.'#000+
+ '03268_E_Message name is too long (max. 255 characters)'#000+
'03269_E_Objective-C message symbol name for "$1" is too long'#000+
'03270_H_Defining a new Objective-C root class. To derive from another '+
- 'root class (e.g., NSObject), specify it as the parent class','.'#000+
+ 'root class (e.g., NSObject), specify it as the pare','nt class.'#000+
'03271_E_Objective-C classes cannot have published sections.'#000+
'03272_F_This module requires an Objective-C mode switch to be compiled'+
#000+
'03273_E_Inherited methods can only be overridden in Objective-C, add "'+
- 'override" (inherited method defined i','n $1)'#000+
+ 'override" (inherited method d','efined in $1)'#000+
'03274_H_Inherited methods can only be overridden in Objective-C, add "'+
'override" (inherited method defined in $1).'#000+
'03275_E_Message name "$1" in inherited class is different from message'+
' name "$2" in current class.'#000+
- '03276_E_It is not yet',' possible to make unique copies of Objective-C '+
+ '03276_E_It is',' not yet possible to make unique copies of Objective-C '+
'types'#000+
'03277_E_Objective-C categories cannot be used as types'#000+
'03278_E_Categories do not override, but replace methods. Use "reintrod'+
'uce" instead.'#000+
- '03279_E_Replaced methods can only be reintroduce','d in Objective-C, ad'+
+ '03279_E_Replaced methods can only be rei','ntroduced in Objective-C, ad'+
'd "reintroduce" (replaced method defined in $1).'#000+
'03280_H_Replaced methods can only be reintroduced in Objective-C, add '+
'"reintroduce" (replaced method defined in $1).'#000+
- '03281_E_Getter for implements interface must use the t','arget'#039's de'+
+ '03281_E_Getter for implements interface must u','se the target'#039's de'+
'fault calling convention.'#000+
'03282_E_Typed files cannot contain reference-counted types.'#000+
'03283_E_Operator is not overloaded: $2 "$1"'#000+
'03284_E_Operator is not overloaded: "$1" $2 "$3"'#000+
- '03285_E_Expected another $1 array elements'#000+
- '03286_E_','String constant too long while ansistrings are disabled'#000+
+ '03285_E_Expected another $1 array elements'#000,
+ '03286_E_String constant too long while ansistrings are disabled'#000+
'03287_E_Type cannot be used as univ parameter because its size is unkn'+
'own at compile time: "$1"'#000+
'03288_E_Only one class constructor can be declared in class: "$1"'#000+
- '03289_E_Only one class',' destructor can be declared in class: "$1"'#000+
+ '03289_E_Only o','ne class destructor can be declared in class: "$1"'#000+
'03290_E_Class constructors can'#039't have parameters'#000+
'03291_E_Class destructors can'#039't have parameters'#000+
'03292_F_This construct requires the \{\$modeswitch objectivec1\} mode '+
'switch to be active'#000+
- '03293_E_Un','icodechar/string constants cannot be converted to ansi/sho'+
+ '03','293_E_Unicodechar/string constants cannot be converted to ansi/sho'+
'rtstring at compile-time'#000+
'03294_E_For-in Objective-Pascal loops require \{\$modeswitch Objective'+
'C2\} to be active'#000+
- '03295_E_The compiler cannot find the NSFastEnumerationProtocol or NSF',
- 'astEnumerationState type in the CocoaAll unit'#000+
+ '03295_E_The compiler cannot find the NSFastEnumerationProtoco','l or NS'+
+ 'FastEnumerationState type in the CocoaAll unit'#000+
'03296_E_Typed constants of the type '#039'procedure is nested'#039' can '+
'only be initialized with NIL and global procedures/functions'#000+
- '03297_F_Declaration of generic class inside another generic class is n'+
- 'o','t allowed'#000+
+ '03297_F_Declaration of generic class inside another generic cla','ss is'+
+ ' not allowed'#000+
'03298_E_Forward declaration of objcprotocol "$1" must be resolved befo'+
're an objcclass can conform to it'#000+
'03299_E_Record types cannot have published sections'#000+
'03300_E_Destructors aren'#039't allowed in records'#000+
- '03301_E_Class methods must b','e static in records'#000+
+ '03301_E_Class method','s must be static in records'#000+
'03302_E_Constructors aren'#039't allowed in records'#000+
'03303_E_At least one argument must be of type "$1"'#000+
'04000_E_Type mismatch'#000+
'04001_E_Incompatible types: got "$1" expected "$2"'#000+
- '04002_E_Type mismatch between "$1" and "$2"'#000+
- '04003','_E_Type identifier expected'#000+
+ '04002_E_Type mismatch between "$1" and "$','2"'#000+
+ '04003_E_Type identifier expected'#000+
'04004_E_Variable identifier expected'#000+
'04005_E_Integer expression expected, but got "$1"'#000+
'04006_E_Boolean expression expected, but got "$1"'#000+
'04007_E_Ordinal expression expected'#000+
- '04008_E_pointer type expected, but got ','"$1"'#000+
+ '04008_E_pointer type expected, ','but got "$1"'#000+
'04009_E_class type expected, but got "$1"'#000+
'04011_E_Can'#039't evaluate constant expression'#000+
'04012_E_Set elements are not compatible'#000+
'04013_E_Operation not implemented for sets'#000+
- '04014_W_Automatic type conversion from floating type to COMP which ','i'+
+ '04014_W_Automatic type conversion from floating type to COM','P which i'+
's an integer type'#000+
'04015_H_use DIV instead to get an integer result'#000+
'04016_E_String types have to match exactly in $V+ mode'#000+
'04017_E_succ or pred on enums with assignments not possible'#000+
- '04018_E_Can'#039't read or write variables of this type'#000+
- '04019_','E_Can'#039't use readln or writeln on typed file'#000+
+ '04018_E_Can'#039't read or write variables of this typ','e'#000+
+ '04019_E_Can'#039't use readln or writeln on typed file'#000+
'04020_E_Can'#039't use read or write on untyped file.'#000+
'04021_E_Type conflict between set elements'#000+
'04022_W_lo/hi(dword/qword) returns the upper/lower word/dword'#000+
- '04023_E_Integer or real expression expecte','d'#000+
+ '04023_E_Integer or real expression',' expected'#000+
'04024_E_Wrong type "$1" in array constructor'#000+
'04025_E_Incompatible type for arg no. $1: Got "$2", expected "$3"'#000+
'04026_E_Method (variable) and Procedure (variable) are not compatible'#000+
- '04027_E_Illegal constant passed to internal math function',#000+
+ '04027_E_Illegal constant passed to internal math ','function'#000+
'04028_E_Can'#039't take the address of constant expressions'#000+
'04029_E_Argument can'#039't be assigned to'#000+
'04030_E_Can'#039't assign local procedure/function to procedure variabl'+
'e'#000+
'04031_E_Can'#039't assign values to an address'#000+
- '04032_E_Can'#039't assign values to const',' variable'#000+
+ '04032_E_Can'#039't assign values ','to const variable'#000+
'04033_E_Array type required'#000+
'04034_E_interface type expected, but got "$1"'#000+
'04035_H_Mixing signed expressions and longwords gives a 64bit result'#000+
'04036_W_Mixing signed expressions and cardinals here may cause a range'+
- ' check error'#000+
- '0403','7_E_Typecast has different size ($1 -> $2) in assignment'#000+
+ ' check er','ror'#000+
+ '04037_E_Typecast has different size ($1 -> $2) in assignment'#000+
'04038_E_enums with assignments can'#039't be used as array index'#000+
'04039_E_Class or Object types "$1" and "$2" are not related'#000+
'04040_W_Class types "$1" and "$2" are not related'#000+
- '04041_E_Class',' or interface type expected, but got "$1"'#000+
+ '04041','_E_Class or interface type expected, but got "$1"'#000+
'04042_E_Type "$1" is not completely defined'#000+
'04043_W_String literal has more characters than short string length'#000+
'04044_W_Comparison is always false due to range of values'#000+
- '04045_W_Comparison is always',' true due to range of values'#000+
+ '04045_W_Comparison i','s always true due to range of values'#000+
'04046_W_Constructing a class "$1" with abstract method "$2"'#000+
'04047_H_The left operand of the IN operator should be byte sized'#000+
'04048_W_Type size mismatch, possible loss of data / range check error'#000+
- '04049_H_Type siz','e mismatch, possible loss of data / range check erro'+
+ '04049_H_','Type size mismatch, possible loss of data / range check erro'+
'r'#000+
'04050_E_The address of an abstract method can'#039't be taken'#000+
'04051_E_Assignments to formal parameters and open arrays are not possi'+
'ble'#000+
'04052_E_Constant Expression expected'#000+
- '04053_E_Operation ','"$1" not supported for types "$2" and "$3"'#000+
+ '04053_E_Op','eration "$1" not supported for types "$2" and "$3"'#000+
'04054_E_Illegal type conversion: "$1" to "$2"'#000+
'04055_H_Conversion between ordinals and pointers is not portable'#000+
'04056_W_Conversion between ordinals and pointers is not portable'#000+
- '04057_E_Can'#039't determi','ne which overloaded function to call'#000+
+ '04057_E_Can'#039't',' determine which overloaded function to call'#000+
'04058_E_Illegal counter variable'#000+
'04059_W_Converting constant real value to double for C variable argume'+
'nt, add explicit typecast to prevent this.'#000+
- '04060_E_Class or COM interface type expected, but got "$1','"'#000+
+ '04060_E_Class or COM interface type expected, but',' got "$1"'#000+
'04061_E_Constant packed arrays are not yet supported'#000+
'04062_E_Incompatible type for arg no. $1: Got "$2" expected "(Bit)Pack'+
'ed Array"'#000+
'04063_E_Incompatible type for arg no. $1: Got "$2" expected "(not pack'+
'ed) Array"'#000+
- '04064_E_Elements of pack','ed arrays cannot be of a type which need to '+
+ '04064_E_Elements',' of packed arrays cannot be of a type which need to '+
'be initialised'#000+
'04065_E_Constant packed records and objects are not yet supported'#000+
'04066_W_Arithmetic "$1" on untyped pointer is unportable to {$T+}, sug'+
'gest typecast'#000+
- '04076_E_Can'#039't take address of a',' subroutine marked as local'#000+
+ '04076_E_Can'#039't take addr','ess of a subroutine marked as local'#000+
'04077_E_Can'#039't export subroutine marked as local from a unit'#000+
'04078_E_Type is not automatable: "$1"'#000+
'04079_H_Converting the operands to "$1" before doing the add could pre'+
'vent overflow errors.'#000+
- '04080_H_Converting the',' operands to "$1" before doing the subtract co'+
+ '04080_H_Conver','ting the operands to "$1" before doing the subtract co'+
'uld prevent overflow errors.'#000+
'04081_H_Converting the operands to "$1" before doing the multiply coul'+
'd prevent overflow errors.'#000+
- '04082_W_Converting pointers to signed integers may result in wrong c','o'+
- 'mparison results and range errors, use an unsigned type instead.'#000+
+ '04082_W_Converting pointers to signed integers may result in',' wrong c'+
+ 'omparison results and range errors, use an unsigned type instead.'#000+
'04083_E_Interface type $1 has no valid GUID'#000+
'04084_E_Invalid selector name "$1"'#000+
'04085_E_Expected Objective-C method, but got $1'#000+
- '04086_E_Expected Objective-C method or constant',' method name'#000+
+ '04086_E_Expected Objective-C method or ','constant method name'#000+
'04087_E_No type info available for this type'#000+
'04088_E_Ordinal or string expression expected'#000+
'04089_E_String expression expected'#000+
'04090_W_Converting 0 to NIL'#000+
'04091_E_Objective-C protocol type expected, but got "$1"'#000+
- '04092_E_The type',' "$1" is not supported for interaction with the Obje'+
+ '04092_E_','The type "$1" is not supported for interaction with the Obje'+
'ctive-C runtime.'#000+
'04093_E_Class or objcclass type expected, but got "$1"'#000+
'04094_E_Objcclass type expected'#000+
'04095_W_Coerced univ parameter type in procedural variable may cause c'+
- 'rash or memory',' corruption: $1 to $2'#000+
+ 'rash o','r memory corruption: $1 to $2'#000+
'04096_E_Type parameters of specializations of generics cannot referenc'+
'e the currently specialized type'#000+
'05000_E_Identifier not found "$1"'#000+
'05001_F_Internal Error in SymTableStack()'#000+
- '05002_E_Duplicate identifier "$1"'#000+
- '05003','_H_Identifier already defined in $1 at line $2'#000+
+ '05002_E_Duplicate identifier "$','1"'#000+
+ '05003_H_Identifier already defined in $1 at line $2'#000+
'05004_E_Unknown identifier "$1"'#000+
'05005_E_Forward declaration not solved "$1"'#000+
'05007_E_Error in type definition'#000+
'05009_E_Forward type not resolved "$1"'#000+
- '05010_E_Only static variables can be used in ','static methods or outsi'+
+ '05010_E_Only static variables can be ','used in static methods or outsi'+
'de methods'#000+
'05012_F_record or class type expected'#000+
'05013_E_Instances of classes or objects with an abstract method are no'+
't allowed'#000+
'05014_W_Label not defined "$1"'#000+
'05015_E_Label used but not defined "$1"'#000+
- '05016_E_Illegal l','abel declaration'#000+
+ '05016_E_I','llegal label declaration'#000+
'05017_E_GOTO and LABEL are not supported (use switch -Sg)'#000+
'05018_E_Label not found'#000+
'05019_E_identifier isn'#039't a label'#000+
'05020_E_label already defined'#000+
'05021_E_illegal type declaration of set elements'#000+
- '05022_E_Forward class definit','ion not resolved "$1"'#000+
+ '05022_E_Forward class',' definition not resolved "$1"'#000+
'05023_H_Unit "$1" not used in $2'#000+
'05024_H_Parameter "$1" not used'#000+
'05025_N_Local variable "$1" not used'#000+
'05026_H_Value parameter "$1" is assigned but never used'#000+
- '05027_N_Local variable "$1" is assigned but never used'#000+
- '05028','_H_Local $1 "$2" is not used'#000+
+ '05027_N_Local variable "$1" is assigned but never us','ed'#000+
+ '05028_H_Local $1 "$2" is not used'#000+
'05029_N_Private field "$1.$2" is never used'#000+
'05030_N_Private field "$1.$2" is assigned but never used'#000+
'05031_N_Private method "$1.$2" never used'#000+
'05032_E_Set type expected'#000+
- '05033_W_Function result does not seem to b','e set'#000+
+ '05033_W_Function result does not s','eem to be set'#000+
'05034_W_Type "$1" is not aligned correctly in current record for C'#000+
'05035_E_Unknown record field identifier "$1"'#000+
'05036_W_Local variable "$1" does not seem to be initialized'#000+
- '05037_W_Variable "$1" does not seem to be initialized'#000+
- '05038_E_','identifier idents no member "$1"'#000+
+ '05037_W_Variable "$1" does not seem to be initialized'#000,
+ '05038_E_identifier idents no member "$1"'#000+
'05039_H_Found declaration: $1'#000+
'05040_E_Data element too large'#000+
'05042_E_No matching implementation for interface method "$1" found'#000+
'05043_W_Symbol "$1" is deprecated'#000+
'05044_W_Symbol "$1" is not portable'#000+
- '05055_W_S','ymbol "$1" is not implemented'#000+
+ '0','5055_W_Symbol "$1" is not implemented'#000+
'05056_E_Can'#039't create unique type from this type'#000+
'05057_H_Local variable "$1" does not seem to be initialized'#000+
'05058_H_Variable "$1" does not seem to be initialized'#000+
- '05059_W_Function result variable does not seem t','o initialized'#000+
+ '05059_W_Function result variable does no','t seem to initialized'#000+
'05060_H_Function result variable does not seem to be initialized'#000+
'05061_W_Variable "$1" read but nowhere assigned'#000+
'05062_H_Found abstract method: $1'#000+
'05063_W_Symbol "$1" is experimental'#000+
- '05064_W_Forward declaration "$1" not resolv','ed, assumed external'#000+
+ '05064_W_Forward declaration "$1" no','t resolved, assumed external'#000+
'05065_W_Symbol "$1" is belongs to a library'#000+
'05066_W_Symbol "$1" is deprecated: "$2"'#000+
'05067_E_Cannot find an enumerator for the type "$1"'#000+
'05068_E_Cannot find a "MoveNext" method in enumerator "$1"'#000+
- '05069_E_Cannot find a "C','urrent" property in enumerator "$1"'#000+
+ '05069_E_Cannot f','ind a "Current" property in enumerator "$1"'#000+
'05070_E_Mismatch between number of declared parameters and number of c'+
'olons in message string.'#000+
'05071_N_Private type "$1.$2" never used'#000+
'05072_N_Private const "$1.$2" never used'#000+
- '05073_N_Private property "$1','.$2" never used'#000+
+ '05073_N_Private prop','erty "$1.$2" never used'#000+
'05074_W_Unit "$1" is deprecated'#000+
'05075_W_Unit "$1" is deprecated: "$2"'#000+
'05076_W_Unit "$1" is not portable'#000+
'05077_W_Unit "$1" is belongs to a library'#000+
'05078_W_Unit "$1" is not implemented'#000+
- '05079_W_Unit "$1" is experimental'#000+
- '05080_E','_No complete definition of the formally declared objcclass "$'+
- '1" is in scope'#000+
+ '05079_W_Unit "$1" is experimental',#000+
+ '05080_E_No complete definition of the formally declared objcclass "$1"'+
+ ' is in scope'#000+
'05081_E_Gotos into initialization or finalization blocks of units are '+
'not allowed'#000+
'06009_E_Parameter list size exceeds 65535 bytes'#000+
- '06012_E_File types must be var par','ameters'#000+
+ '06012_E_File types must be',' var parameters'#000+
'06013_E_The use of a far pointer isn'#039't allowed there'#000+
'06015_E_EXPORT declared functions can'#039't be called'#000+
'06016_W_Possible illegal call of constructor or destructor'#000+
'06017_N_Inefficient code'#000+
'06018_W_unreachable code'#000+
- '06020_E_Abstract met','hods can'#039't be called directly'#000+
+ '06020_E_Abst','ract methods can'#039't be called directly'#000+
'06027_DL_Register $1 weight $2 $3'#000+
'06029_DL_Stack frame is omitted'#000+
'06031_E_Object or class methods can'#039't be inline.'#000+
'06032_E_Procvar calls cannot be inline.'#000+
'06033_E_No code for inline procedure stored'#000+
- '06035_E_Ele','ment zero of an ansi/wide- or longstring can'#039't be acc'+
+ '060','35_E_Element zero of an ansi/wide- or longstring can'#039't be acc'+
'essed, use (set)length instead'#000+
'06037_E_Constructors or destructors cannot be called inside a '#039'wit'+
'h'#039' clause'#000+
'06038_E_Cannot call message handler methods directly'#000+
- '06039_E_Jump in or outside ','of an exception block'#000+
+ '06039_E_Jump in or ','outside of an exception block'#000+
'06040_E_Control flow statements aren'#039't allowed in a finally block'#000+
'06041_W_Parameters size exceeds limit for certain cpu'#039's'#000+
'06042_W_Local variable size exceed limit for certain cpu'#039's'#000+
- '06043_E_Local variables size exceeds ','supported limit'#000+
+ '06043_E_Local variables size ','exceeds supported limit'#000+
'06044_E_BREAK not allowed'#000+
'06045_E_CONTINUE not allowed'#000+
'06046_F_Unknown compilerproc "$1". Check if you use the correct run ti'+
'me library.'#000+
'06047_F_Cannot find system type "$1". Check if you use the correct run'+
- ' time library.'#000+
- '06','048_H_Inherited call to abstract method ignored'#000+
+ ' time lib','rary.'#000+
+ '06048_H_Inherited call to abstract method ignored'#000+
'06049_E_Goto label "$1" not defined or optimized away'#000+
'06050_F_Cannot find type "$1" in unit "$2". Check if you use the corre'+
'ct run time library.'#000+
- '06051_E_Interprocedural gotos are allowed only ','to outer subroutines'#000+
+ '06051_E_Interprocedural gotos are allow','ed only to outer subroutines'#000+
'06052_E_Label must be defined in the same scope as it is declared'#000+
'06053_E_Leaving procedures containing explicit or implicit exceptions '+
'frames using goto is not allowed'#000+
- '07000_DL_Starting $1 styled assembler parsing'#000+
- '0700','1_DL_Finished $1 styled assembler parsing'#000+
+ '07000_DL_Starting $1 styled assembler pars','ing'#000+
+ '07001_DL_Finished $1 styled assembler parsing'#000+
'07002_E_Non-label pattern contains @'#000+
'07004_E_Error building record offset'#000+
'07005_E_OFFSET used without identifier'#000+
'07006_E_TYPE used without identifier'#000+
- '07007_E_Cannot use local variable or parameters ','here'#000+
+ '07007_E_Cannot use local variable or par','ameters here'#000+
'07008_E_need to use OFFSET here'#000+
'07009_E_need to use $ here'#000+
'07010_E_Cannot use multiple relocatable symbols'#000+
'07011_E_Relocatable symbol can only be added'#000+
'07012_E_Invalid constant expression'#000+
- '07013_E_Relocatable symbol is not allowed'#000+
- '07014','_E_Invalid reference syntax'#000+
+ '07013_E_Relocatable symbol is not allow','ed'#000+
+ '07014_E_Invalid reference syntax'#000+
'07015_E_You cannot reach $1 from that code'#000+
'07016_E_Local symbols/labels aren'#039't allowed as references'#000+
'07017_E_Invalid base and index register usage'#000+
'07018_W_Possible error in object field handling'#000+
- '07019_E_Wrong sca','le factor specified'#000+
+ '07019_E_W','rong scale factor specified'#000+
'07020_E_Multiple index register usage'#000+
'07021_E_Invalid operand type'#000+
'07022_E_Invalid string as opcode operand: $1'#000+
'07023_W_@CODE and @DATA not supported'#000+
'07024_E_Null label references are not allowed'#000+
- '07025_E_Divide by zero i','n asm evaluator'#000+
+ '07025_E_Divide b','y zero in asm evaluator'#000+
'07026_E_Illegal expression'#000+
'07027_E_escape sequence ignored: $1'#000+
'07028_E_Invalid symbol reference'#000+
'07029_W_Fwait can cause emulation problems with emu387'#000+
'07030_W_$1 without operand translated into $1P'#000+
- '07031_W_ENTER instruction ','is not supported by Linux kernel'#000+
+ '07031_W_ENTER inst','ruction is not supported by Linux kernel'#000+
'07032_W_Calling an overload function in assembler'#000+
'07033_E_Unsupported symbol type for operand'#000+
'07034_E_Constant value out of bounds'#000+
'07035_E_Error converting decimal $1'#000+
- '07036_E_Error converting octal $1'#000+
- '07037_','E_Error converting binary $1'#000+
+ '07036_E_Error converting octal $','1'#000+
+ '07037_E_Error converting binary $1'#000+
'07038_E_Error converting hexadecimal $1'#000+
'07039_H_$1 translated to $2'#000+
'07040_W_$1 is associated to an overloaded function'#000+
'07041_E_Cannot use SELF outside a method'#000+
- '07042_E_Cannot use OLDEBP outside a nested procedur','e'#000+
+ '07042_E_Cannot use OLDEBP outside a nested ','procedure'#000+
'07043_W_Procedures can'#039't return any value in asm code'#000+
'07044_E_SEG not supported'#000+
'07045_E_Size suffix and destination or source size do not match'#000+
'07046_W_Size suffix and destination or source size do not match'#000+
- '07047_E_Assembler syntax error',#000+
+ '07047_E_Assembler synt','ax error'#000+
'07048_E_Invalid combination of opcode and operands'#000+
'07049_E_Assembler syntax error in operand'#000+
'07050_E_Assembler syntax error in constant'#000+
'07051_E_Invalid String expression'#000+
- '07052_W_constant with symbol $1 for address which is not on a pointer',
- #000+
+ '07052_W_constant with symbol $1 for address which is not on a',' pointe'+
+ 'r'#000+
'07053_E_Unrecognized opcode $1'#000+
'07054_E_Invalid or missing opcode'#000+
'07055_E_Invalid combination of prefix and opcode: $1'#000+
'07056_E_Invalid combination of override and opcode: $1'#000+
'07057_E_Too many operands on line'#000+
'07058_W_NEAR ignored'#000+
- '07059_W_FAR',' ignored'#000+
+ '070','59_W_FAR ignored'#000+
'07060_E_Duplicate local symbol $1'#000+
'07061_E_Undefined local symbol $1'#000+
'07062_E_Unknown label identifier $1'#000+
'07063_E_Invalid register name'#000+
'07064_E_Invalid floating point register name'#000+
'07066_W_Modulo not supported'#000+
- '07067_E_Invalid floatin','g point constant $1'#000+
+ '07067_E_Invalid',' floating point constant $1'#000+
'07068_E_Invalid floating point expression'#000+
'07069_E_Wrong symbol type'#000+
'07070_E_Cannot index a local var or parameter with a register'#000+
'07071_E_Invalid segment override expression'#000+
- '07072_W_Identifier $1 supposed external'#000+
- '07073_','E_Strings not allowed as constants'#000+
+ '07072_W_Identifier $1 supposed externa','l'#000+
+ '07073_E_Strings not allowed as constants'#000+
'07074_No type of variable specified'#000+
'07075_E_assembler code not returned to text section'#000+
'07076_E_Not a directive or local symbol $1'#000+
'07077_E_Using a defined name as a local label'#000+
- '07078_E_Dollar token is used',' without an identifier'#000+
+ '07078_E_Dollar token',' is used without an identifier'#000+
'07079_W_32bit constant created for address'#000+
'07080_N_.align is target specific, use .balign or .p2align'#000+
'07081_E_Can'#039't access fields directly for parameters'#000+
- '07082_E_Can'#039't access fields of objects/classes directly'#000+
- '07083_E','_No size specified and unable to determine the size of the op'+
- 'erands'#000+
+ '07082_E_Can'#039't access fields of objects/classes directly',#000+
+ '07083_E_No size specified and unable to determine the size of the oper'+
+ 'ands'#000+
'07084_E_Cannot use RESULT in this function'#000+
'07086_W_"$1" without operand translated into "$1 %st,%st(1)"'#000+
'07087_W_"$1 %st(n)" translated into "$1 %st,%st(n)"'#000+
- '07088_W_"$1 %st(','n)" translated into "$1 %st(n),%st"'#000+
+ '07088_W_','"$1 %st(n)" translated into "$1 %st(n),%st"'#000+
'07089_E_Char < not allowed here'#000+
'07090_E_Char > not allowed here'#000+
'07093_W_ALIGN not supported'#000+
'07094_E_Inc and Dec cannot be together'#000+
'07095_E_Invalid reglist for movem'#000+
- '07096_E_Reglist invalid for opcode'#000+
- '0709','7_E_Higher cpu mode required ($1)'#000+
+ '07096_E_Reglist invalid for opc','ode'#000+
+ '07097_E_Higher cpu mode required ($1)'#000+
'07098_W_No size specified and unable to determine the size of the oper'+
'ands, using DWORD as default'#000+
'07099_E_Syntax error while trying to parse a shifter operand'#000+
- '07100_E_Address of packed component is not at ','a byte boundary'#000+
+ '07100_E_Address of packed component is',' not at a byte boundary'#000+
'07101_W_No size specified and unable to determine the size of the oper'+
'ands, using BYTE as default'#000+
'07102_W_Use of +offset(%ebp) for parameters invalid here'#000+
- '07103_W_Use of +offset(%ebp) is not compatible with regcall conventio',
- 'n'#000+
+ '07103_W_Use of +offset(%ebp) is not compatible with regcall c','onventi'+
+ 'on'#000+
'07104_W_Use of -offset(%ebp) is not recommended for local variable acc'+
'ess'#000+
'07105_W_Use of -offset(%esp), access may cause a crash or value may be'+
' lost'#000+
'07106_E_VMTOffset must be used in combination with a virtual method, a'+
- 'nd "$1" is not vir','tual'#000+
+ 'nd "$1" is',' not virtual'#000+
'07107_E_Generating PIC, but reference is not PIC-safe'#000+
'07108_E_All registers in a register set must be of the same kind and w'+
'idth'#000+
'07109_E_A register set cannot be empty'#000+
- '07110_W_@GOTPCREL is useless and potentially dangereous for local s','y'+
+ '07110_W_@GOTPCREL is useless and potentially dangereous for',' local sy'+
'mbols'#000+
'08000_F_Too many assembler files'#000+
'08001_F_Selected assembler output not supported'#000+
'08002_F_Comp not supported'#000+
'08003_F_Direct not support for binary writers'#000+
'08004_E_Allocating of data is only allowed in bss section'#000+
- '08005_F_No binary wri','ter selected'#000+
+ '08005_F_No bi','nary writer selected'#000+
'08006_E_Asm: Opcode $1 not in table'#000+
'08007_E_Asm: $1 invalid combination of opcode and operands'#000+
'08008_E_Asm: 16 Bit references not supported'#000+
'08009_E_Asm: Invalid effective address'#000+
- '08010_E_Asm: Immediate or reference expected'#000+
- '080','11_E_Asm: $1 value exceeds bounds $2'#000+
+ '08010_E_Asm: Immediate or reference expe','cted'#000+
+ '08011_E_Asm: $1 value exceeds bounds $2'#000+
'08012_E_Asm: Short jump is out of range $1'#000+
'08013_E_Asm: Undefined label $1'#000+
'08014_E_Asm: Comp type not supported for this target'#000+
'08015_E_Asm: Extended type not supported for this target'#000+
- '08016_E_Asm: Dupli','cate label $1'#000+
+ '08016_E_As','m: Duplicate label $1'#000+
'08017_E_Asm: Redefined label $1'#000+
'08018_E_Asm: First defined here'#000+
'08019_E_Asm: Invalid register $1'#000+
'08020_E_Asm: 16 or 32 Bit references not supported'#000+
'08021_E_Asm: 64 Bit operands not supported'#000+
- '09000_W_Source operating system red','efined'#000+
+ '09000_W_Source operating sy','stem redefined'#000+
'09001_I_Assembling (pipe) $1'#000+
'09002_E_Can'#039't create assembler file: $1'#000+
'09003_E_Can'#039't create object file: $1'#000+
'09004_E_Can'#039't create archive file: $1'#000+
'09005_E_Assembler $1 not found, switching to external assembling'#000+
- '09006_T_Using assembler:',' $1'#000+
+ '09006_T_Using as','sembler: $1'#000+
'09007_E_Error while assembling exitcode $1'#000+
'09008_E_Can'#039't call the assembler, error $1 switching to external a'+
'ssembling'#000+
'09009_I_Assembling $1'#000+
'09010_I_Assembling with smartlinking $1'#000+
- '09011_W_Object $1 not found, Linking may fail !'#000+
- '09012_W','_Library $1 not found, Linking may fail !'#000+
+ '09011_W_Object $1 not found, Linking may fail !',#000+
+ '09012_W_Library $1 not found, Linking may fail !'#000+
'09013_E_Error while linking'#000+
'09014_E_Can'#039't call the linker, switching to external linking'#000+
'09015_I_Linking $1'#000+
'09016_E_Util $1 not found, switching to external linking'#000+
'09017_T_Using util $1'#000+
- '09018_E_Cre','ation of Executables not supported'#000+
+ '090','18_E_Creation of Executables not supported'#000+
'09019_E_Creation of Dynamic/Shared Libraries not supported'#000+
'09020_I_Closing script $1'#000+
'09021_E_resource compiler "$1" not found, switching to external mode'#000+
'09022_I_Compiling resource $1'#000+
- '09023_T_unit $1 can'#039't',' be statically linked, switching to smart l'+
+ '09023_T_unit ','$1 can'#039't be statically linked, switching to smart l'+
'inking'#000+
'09024_T_unit $1 can'#039't be smart linked, switching to static linking'+
#000+
'09025_T_unit $1 can'#039't be shared linked, switching to static linkin'+
'g'#000+
- '09026_E_unit $1 can'#039't be smart or static linked'#000+
- '09027_E','_unit $1 can'#039't be shared or static linked'#000+
+ '09026_E_unit $1 can'#039't be smart or static linked',#000+
+ '09027_E_unit $1 can'#039't be shared or static linked'#000+
'09028_D_Calling resource compiler "$1" with "$2" as command line'#000+
'09029_E_Error while compiling resources'#000+
'09030_E_Can'#039't call the resource compiler "$1", switching to extern'+
'al mode'#000+
- '09031_E_Can'#039't open ','resource file "$1"'#000+
+ '09031_E_Can',#039't open resource file "$1"'#000+
'09032_E_Can'#039't write resource file "$1"'#000+
'09128_F_Can'#039't post process executable $1'#000+
'09129_F_Can'#039't open executable $1'#000+
'09130_X_Size of Code: $1 bytes'#000+
'09131_X_Size of initialized data: $1 bytes'#000+
- '09132_X_Size of uninitialized data',': $1 bytes'#000+
+ '09132_X_Size of uninitiali','zed data: $1 bytes'#000+
'09133_X_Stack space reserved: $1 bytes'#000+
'09134_X_Stack space committed: $1 bytes'#000+
'09200_F_Executable image size is too big for $1 target.'#000+
'09201_W_Object file "$1" contains 32-bit absolute relocation to symbol'+
' "$2".'#000+
- '10000_T_Unitsearc','h: $1'#000+
+ '10000_T_U','nitsearch: $1'#000+
'10001_T_PPU Loading $1'#000+
'10002_U_PPU Name: $1'#000+
'10003_U_PPU Flags: $1'#000+
@@ -882,160 +883,160 @@ const msgtxt : array[0..000242,1..240] of char=(
'10006_U_PPU File too short'#000+
'10007_U_PPU Invalid Header (no PPU at the begin)'#000+
'10008_U_PPU Invalid Version $1'#000+
- '10009_U_PPU is compi','led for another processor'#000+
+ '10009_U_PPU ','is compiled for another processor'#000+
'10010_U_PPU is compiled for another target'#000+
'10011_U_PPU Source: $1'#000+
'10012_U_Writing $1'#000+
'10013_F_Can'#039't Write PPU-File'#000+
'10014_F_Error reading PPU-File'#000+
'10015_F_unexpected end of PPU-File'#000+
- '10016_F_Invalid PPU-File entry: $1',#000+
+ '10016_F_Invalid PPU-File e','ntry: $1'#000+
'10017_F_PPU Dbx count problem'#000+
'10018_E_Illegal unit name: $1'#000+
'10019_F_Too much units'#000+
'10020_F_Circular unit reference between $1 and $2'#000+
'10021_F_Can'#039't compile unit $1, no sources available'#000+
'10022_F_Can'#039't find unit $1 used by $2'#000+
- '10023_W_Unit $1 ','was not found but $2 exists'#000+
+ '10023_W_','Unit $1 was not found but $2 exists'#000+
'10024_F_Unit $1 searched but $2 found'#000+
'10025_W_Compiling the system unit requires the -Us switch'#000+
'10026_F_There were $1 errors compiling module, stopping'#000+
'10027_U_Load from $1 ($2) unit $3'#000+
- '10028_U_Recompiling $1, ch','ecksum changed for $2'#000+
+ '10028_U_Recompilin','g $1, checksum changed for $2'#000+
'10029_U_Recompiling $1, source found only'#000+
'10030_U_Recompiling unit, static lib is older than ppufile'#000+
'10031_U_Recompiling unit, shared lib is older than ppufile'#000+
- '10032_U_Recompiling unit, obj and asm are older than ppufi','le'#000+
+ '10032_U_Recompiling unit, obj and asm are older th','an ppufile'#000+
'10033_U_Recompiling unit, obj is older than asm'#000+
'10034_U_Parsing interface of $1'#000+
'10035_U_Parsing implementation of $1'#000+
'10036_U_Second load for unit $1'#000+
'10037_U_PPU Check file $1 time $2'#000+
- '10040_W_Can'#039't recompile unit $1, but found modifed inc','lude files'+
+ '10040_W_Can'#039't recompile unit $1, but found mod','ifed include files'+
#000+
'10041_U_File $1 is newer than the one used for creating PPU file $2'#000+
'10042_U_Trying to use a unit which was compiled with a different FPU m'+
'ode'#000+
'10043_U_Loading interface units from $1'#000+
- '10044_U_Loading implementation units from $1'#000+
- '10','045_U_Interface CRC changed for unit $1'#000+
+ '10044_U_Loading implementation units fr','om $1'#000+
+ '10045_U_Interface CRC changed for unit $1'#000+
'10046_U_Implementation CRC changed for unit $1'#000+
'10047_U_Finished compiling unit $1'#000+
'10048_U_Adding dependency: $1 depends on $2'#000+
'10049_U_No reload, is caller: $1'#000+
- '10050_U_No reload, already in second comp','ile: $1'#000+
+ '10050_U_No reload, already in sec','ond compile: $1'#000+
'10051_U_Flag for reload: $1'#000+
'10052_U_Forced reloading'#000+
'10053_U_Previous state of $1: $2'#000+
'10054_U_Already compiling $1, setting second compile'#000+
'10055_U_Loading unit $1'#000+
'10056_U_Finished loading unit $1'#000+
- '10057_U_Registering new unit $1'#000+
- '1005','8_U_Re-resolving unit $1'#000+
+ '10057_U_Registering new unit',' $1'#000+
+ '10058_U_Re-resolving unit $1'#000+
'10059_U_Skipping re-resolving unit $1, still loading used units'#000+
'10060_U_Unloading resource unit $1 (not needed)'#000+
'10061_E_Unit $1 was compiled using a different whole program optimizat'+
- 'ion feedback input ($2, $3); reco','mpile it without wpo or use the sam'+
+ 'ion feedback input ($2, $','3); recompile it without wpo or use the sam'+
'e wpo feedback input file for this compilation invocation'#000+
'10062_U_Indirect interface (objects/classes) CRC changed for unit $1'#000+
'11000_O_$1 [options] <inputfile> [options]'#000+
- '11001_W_Only one source file suppor','ted, changing source file to comp'+
+ '11001_W_Only one source fil','e supported, changing source file to comp'+
'ile from "$1" into "$2"'#000+
'11002_W_DEF file can be created only for OS/2'#000+
'11003_E_nested response files are not supported'#000+
'11004_F_No source file name in command line'#000+
- '11005_N_No option inside $1 config file'#000+
- '11006','_E_Illegal parameter: $1'#000+
+ '11005_N_No option inside $1 config fi','le'#000+
+ '11006_E_Illegal parameter: $1'#000+
'11007_H_-? writes help pages'#000+
'11008_F_Too many config files nested'#000+
'11009_F_Unable to open file $1'#000+
'11010_D_Reading further options from $1'#000+
'11011_W_Target is already set to: $1'#000+
- '11012_W_Shared libs not supported on DOS ','platform, reverting to stat'+
+ '11012_W_Shared libs not supported',' on DOS platform, reverting to stat'+
'ic'#000+
'11013_F_In options file $1 at line $2 too many \var{\#IF(N)DEFs} encou'+
'ntered'#000+
'11014_F_In options file $1 at line $2 unexpected \var{\#ENDIFs} encoun'+
'tered'#000+
- '11015_F_Open conditional at the end of the options file'#000+
- '1','1016_W_Debug information generation is not supported by this execut'+
- 'able'#000+
+ '11015_F_Open conditional at the end of the option','s file'#000+
+ '11016_W_Debug information generation is not supported by this executab'+
+ 'le'#000+
'11017_H_Try recompiling with -dGDB'#000+
'11018_W_You are using the obsolete switch $1'#000+
'11019_W_You are using the obsolete switch $1, please use $2'#000+
- '11020_N_Switching assembler ','to default source writing assembler'#000+
+ '11020_N_Switching as','sembler to default source writing assembler'#000+
'11021_W_Assembler output selected "$1" is not compatible with "$2"'#000+
'11022_W_"$1" assembler use forced'#000+
'11026_T_Reading options from file $1'#000+
'11027_T_Reading options from environment $1'#000+
- '11028_D_Handling optio','n "$1"'#000+
+ '11028_D_Handli','ng option "$1"'#000+
'11029_O_*** press enter ***'#000+
'11030_H_Start of reading config file $1'#000+
'11031_H_End of reading config file $1'#000+
'11032_D_interpreting option "$1"'#000+
'11036_D_interpreting firstpass option "$1"'#000+
'11033_D_interpreting file option "$1"'#000+
- '11034_D_Readi','ng config file "$1"'#000+
+ '11034','_D_Reading config file "$1"'#000+
'11035_D_found source file name "$1"'#000+
'11039_E_Unknown code page'#000+
'11040_F_Config file $1 is a directory'#000+
'11041_W_Assembler output selected "$1" cannot generate debug info, deb'+
'ugging disabled'#000+
- '11042_W_Use of ppc386.cfg is depre','cated, please use fpc.cfg instead'#000+
+ '11042_W_Use of ppc386.cfg ','is deprecated, please use fpc.cfg instead'#000+
'11043_F_In options file $1 at line $2 \var{\#ELSE} directive without \'+
'var{\#IF(N)DEF} found'#000+
'11044_F_Option "$1" is not, or not yet, supported on the current targe'+
't platform'#000+
- '11045_F_The feature "$1" is not, ','or not yet, supported on the select'+
+ '11045_F_The feature "$1" ','is not, or not yet, supported on the select'+
'ed target platform'#000+
'11046_N_DWARF debug information cannot be used with smart linking on t'+
'his target, switching to static linking'#000+
'11047_W_Option "$1" is ignored for the current target platform.'#000+
- '11048_W_Disa','bling external debug information because it is unsupport'+
+ '1104','8_W_Disabling external debug information because it is unsupport'+
'ed for the selected target/debug format combination.'#000+
'12000_F_Cannot open whole program optimization feedback file "$1"'#000+
- '12001_D_Processing whole program optimization information in wpo ','fee'+
+ '12001_D_Processing whole program optimization information',' in wpo fee'+
'dback file "$1"'#000+
'12002_D_Finished processing the whole program optimization information'+
' in wpo feedback file "$1"'#000+
'12003_E_Expected section header, but got "$2" at line $1 of wpo feedba'+
'ck file'#000+
- '12004_W_No handler registered for whole progra','m optimization section'+
+ '12004_W_No handler registered for whol','e program optimization section'+
' "$2" at line $1 of wpo feedback file, ignoring'#000+
'12005_D_Found whole program optimization section "$1" with information'+
' about "$2"'#000+
'12006_F_The selected whole program optimizations require a previously '+
- 'generated feedback',' file (use -Fw to specify)'#000+
+ 'generated ','feedback file (use -Fw to specify)'#000+
'12007_E_No collected information necessary to perform "$1" whole progr'+
'am optimization found'#000+
'12008_F_Specify a whole program optimization feedback file to store th'+
'e generated info in (using -FW)'#000+
- '12009_E_Not generat','ing any whole program optimization information, y'+
+ '12009_E_Not',' generating any whole program optimization information, y'+
'et a feedback file was specified (using -FW)'#000+
'12010_E_Not performing any whole program optimizations, yet an input f'+
'eedback file was specified (using -Fw)'#000+
- '12011_D_Skipping whole program optimi','zation section "$1", because no'+
+ '12011_D_Skipping whole progra','m optimization section "$1", because no'+
't needed by the requested optimizations'#000+
'12012_W_Overriding previously read information for "$1" from feedback '+
'input file using information in section "$2"'#000+
- '12013_E_Cannot extract symbol liveness information fro','m program when'+
+ '12013_E_Cannot extract symbol liveness informa','tion from program when'+
' stripping symbols, use -Xs-'#000+
'12014_E_Cannot extract symbol liveness information from program when w'+
'hen not linking'#000+
'12015_F_Cannot find "$1" or "$2" to extract symbol liveness informatio'+
'n from linked program'#000+
- '12016_E_Error durin','g reading symbol liveness information produced by'+
+ '12016_E_Err','or during reading symbol liveness information produced by'+
' "$1"'#000+
'12017_F_Error executing "$1" (exitcode: $2) to extract symbol informat'+
'ion from linked program'#000+
'12018_E_Collection of symbol liveness information can only help when u'+
- 'sing smart linking, u','se -CX -XX'#000+
+ 'sing smart li','nking, use -CX -XX'#000+
'12019_E_Cannot create specified whole program optimisation feedback fi'+
'le "$1"'#000+
'11023_Free Pascal Compiler version $FPCFULLVERSION [$FPCDATE] for $FPC'+
'CPU'#010+
'Copyright (c) 1993-2010 by Florian Klaempfl'#000+
- '11024_Free Pascal Compiler versio','n $FPCVERSION'#010+
+ '11024_Free Pascal Compile','r version $FPCVERSION'#010+
#010+
'Compiler Date : $FPCDATE'#010+
'Compiler CPU Target: $FPCCPU'#010+
@@ -1049,8 +1050,8 @@ const msgtxt : array[0..000242,1..240] of char=(
'Supported FPU instruction sets:'#010+
' $FPUINSTRUCTIONSETS'#010+
#010+
- 'Supported ABI targets:'#010+
- ' ','$ABITARGETS'#010+
+ 'Supported ABI tar','gets:'#010+
+ ' $ABITARGETS'#010+
#010+
'Supported Optimizations:'#010+
' $OPTIMIZATIONS'#010+
@@ -1063,7 +1064,7 @@ const msgtxt : array[0..000242,1..240] of char=(
' $CONTROLLERTYPES'#010+
#010+
'This program comes under the GNU General Public Licence'#010+
- 'For more i','nformation read COPYING.FPC'#010+
+ 'Fo','r more information read COPYING.FPC'#010+
#010+
'Report bugs, suggestions, etc. to:'#010+
' http://bugs.freepascal.org'#010+
@@ -1071,68 +1072,68 @@ const msgtxt : array[0..000242,1..240] of char=(
' bugs@freepascal.org'#000+
'11025_**0*_Put + after a boolean switch option to enable it, - to disa'+
'ble it'#010+
- '**1a_The compil','er doesn'#039't delete the generated assembler file'#010+
+ '**1a_Th','e compiler doesn'#039't delete the generated assembler file'#010+
'**2al_List sourcecode lines in assembler file'#010+
'**2an_List node info in assembler file'#010+
'*L2ap_Use pipes instead of creating temporary assembler files'#010+
- '**2ar_List register allocation/release info in',' assembler file'#010+
+ '**2ar_List register allocation/release',' info in assembler file'#010+
'**2at_List temp allocation/release info in assembler file'#010+
'**1A<x>_Output format:'#010+
'**2Adefault_Use default assembler'#010+
'3*2Aas_Assemble using GNU AS'#010+
'3*2Amacho_Mach-O (Darwin, Intel 32 bit) using internal writer'#010+
- '3*2Anasmcoff_COFF ','(Go32v2) file using Nasm'#010+
+ '3*2Anasmco','ff_COFF (Go32v2) file using Nasm'#010+
'3*2Anasmelf_ELF32 (Linux) file using Nasm'#010+
'3*2Anasmwin32_Win32 object file using Nasm'#010+
'3*2Anasmwdosx_Win32/WDOSX object file using Nasm'#010+
'3*2Awasm_Obj file using Wasm (Watcom)'#010+
'3*2Anasmobj_Obj file using Nasm'#010+
- '3*2Amasm_Ob','j file using Masm (Microsoft)'#010+
+ '3*2','Amasm_Obj file using Masm (Microsoft)'#010+
'3*2Atasm_Obj file using Tasm (Borland)'#010+
'3*2Aelf_ELF (Linux) using internal writer'#010+
'3*2Acoff_COFF (Go32v2) using internal writer'#010+
'3*2Apecoff_PE-COFF (Win32) using internal writer'#010+
- '4*2Aas_Assemble using GNU AS'#010+
- '6*2Aas','_Unix o-file using GNU AS'#010+
+ '4*2Aas_Assemble using GNU A','S'#010+
+ '6*2Aas_Unix o-file using GNU AS'#010+
'6*2Agas_GNU Motorola assembler'#010+
'6*2Amit_MIT Syntax (old GAS)'#010+
'6*2Amot_Standard Motorola assembler'#010+
'A*2Aas_Assemble using GNU AS'#010+
'P*2Aas_Assemble using GNU AS'#010+
'S*2Aas_Assemble using GNU AS'#010+
- '**1b_Generate browser info'#010+
- '**2b','l_Generate local symbol info'#010+
+ '**1b_Generate browser i','nfo'#010+
+ '**2bl_Generate local symbol info'#010+
'**1B_Build all modules'#010+
'**1C<x>_Code generation options:'#010+
'**2C3<x>_Turn on ieee error checking for constants'#010+
'**2Ca<x>_Select ABI, see fpc -i for possible values'#010+
'**2Cb_Generate big-endian code'#010+
- '**2Cc<x>_Set default ','calling convention to <x>'#010+
+ '**2Cc<x>_Set ','default calling convention to <x>'#010+
'**2CD_Create also dynamic library (not supported)'#010+
'**2Ce_Compilation with emulated floating point opcodes'#010+
'**2Cf<x>_Select fpu instruction set to use, see fpc -i for possible va'+
'lues'#010+
- '**2CF<x>_Minimal floating point co','nstant precision (default, 32, 64)'+
+ '**2CF<x>_Minimal floating ','point constant precision (default, 32, 64)'+
#010+
'**2Cg_Generate PIC code'#010+
'**2Ch<n>_<n> bytes heap (between 1023 and 67107840)'#010+
'**2Ci_IO-checking'#010+
'**2Cn_Omit linking stage'#010+
'**2Co_Check overflow of integer operations'#010+
- '**2CO_Check for possible overflow of intege','r operations'#010+
+ '**2CO_Check for possible overflow o','f integer operations'#010+
'**2Cp<x>_Select instruction set, see fpc -i for possible values'#010+
'**2CP<x>=<y>_ packing settings'#010+
'**3CPPACKSET=<y>_ <y> set allocation: 0, 1 or DEFAULT or NORMAL, 2, 4 '+
'and 8'#010+
'**2Cr_Range checking'#010+
- '**2CR_Verify object method call val','idity'#010+
+ '**2CR_Verify object method ','call validity'#010+
'**2Cs<n>_Set stack checking size to <n>'#010+
'**2Ct_Stack checking (for testing only, see manual)'#010+
'**2CX_Create also smartlinked library'#010+
'**1d<x>_Defines the symbol <x>'#010+
'**1D_Generate a DEF file'#010+
'**2Dd<x>_Set description to <x>'#010+
- '**2Dv<x>_Set DLL',' version to <x>'#010+
+ '**2Dv<x>','_Set DLL version to <x>'#010+
'*O2Dw_PM application'#010+
'**1e<x>_Set path to executable'#010+
'**1E_Same as -Cn'#010+
@@ -1140,46 +1141,46 @@ const msgtxt : array[0..000242,1..240] of char=(
'**1F<x>_Set file names and paths:'#010+
'**2Fa<x>[,y]_(for a program) load units <x> and [y] before uses is par'+
'sed'#010+
- '**2Fc<x>_Set input codepage',' to <x>'#010+
+ '**2Fc<x>_Set input ','codepage to <x>'#010+
'**2FC<x>_Set RC compiler binary name to <x>'#010+
'**2Fd_Disable the compiler'#039's internal directory cache'#010+
'**2FD<x>_Set the directory where to search for compiler utilities'#010+
'**2Fe<x>_Redirect error output to <x>'#010+
- '**2Ff<x>_Add <x> to framework ','path (Darwin only)'#010+
+ '**2Ff<x>_Add <x> to fr','amework path (Darwin only)'#010+
'**2FE<x>_Set exe/unit output path to <x>'#010+
'**2Fi<x>_Add <x> to include path'#010+
'**2Fl<x>_Add <x> to library path'#010+
'**2FL<x>_Use <x> as dynamic linker'#010+
'**2Fm<x>_Load unicode conversion table from <x>.txt in the compiler di'+
- 'r'#010+
- '**2Fo<x','>_Add <x> to object path'#010+
+ 'r',#010+
+ '**2Fo<x>_Add <x> to object path'#010+
'**2Fr<x>_Load error message file <x>'#010+
'**2FR<x>_Set resource (.res) linker to <x>'#010+
'**2Fu<x>_Add <x> to unit path'#010+
'**2FU<x>_Set unit output path to <x>, overrides -FE'#010+
- '**2FW<x>_Store generated whole-program optimization f','eedback in <x>'#010+
+ '**2FW<x>_Store generated whole-program optimi','zation feedback in <x>'#010+
'**2Fw<x>_Load previously stored whole-program optimization feedback fr'+
'om <x>'#010+
'*g1g_Generate debug information (default format for target)'#010+
'*g2gc_Generate checks for pointers'#010+
- '*g2gh_Use heaptrace unit (for memory leak/corruption ','debugging)'#010+
+ '*g2gh_Use heaptrace unit (for memory leak/cor','ruption debugging)'#010+
'*g2gl_Use line info unit (show more info with backtraces)'#010+
'*g2go<x>_Set debug information options'#010+
'*g3godwarfsets_ Enable DWARF '#039'set'#039' type debug information (bre'+
'aks gdb < 6.5)'#010+
- '*g3gostabsabsincludes_ Store absolute/full include file',' paths in Sta'+
+ '*g3gostabsabsincludes_ Store absolute/full incl','ude file paths in Sta'+
'bs'#010+
'*g3godwarfmethodclassprefix_ Prefix method names in DWARF with class n'+
'ame'#010+
'*g2gp_Preserve case in stabs symbol names'#010+
'*g2gs_Generate Stabs debug information'#010+
'*g2gt_Trash local variables (to detect uninitialized uses)'#010+
- '*g2gv_Gene','rates programs traceable with Valgrind'#010+
+ '*g','2gv_Generates programs traceable with Valgrind'#010+
'*g2gw_Generate DWARFv2 debug information (same as -gw2)'#010+
'*g2gw2_Generate DWARFv2 debug information'#010+
'*g2gw3_Generate DWARFv3 debug information'#010+
- '*g2gw4_Generate DWARFv4 debug information (experimental)'#010+
- '**1i','_Information'#010+
+ '*g2gw4_Generate DWARFv4 debug information (experiment','al)'#010+
+ '**1i_Information'#010+
'**2iD_Return compiler date'#010+
'**2iV_Return short compiler version'#010+
'**2iW_Return full compiler version'#010+
@@ -1187,71 +1188,71 @@ const msgtxt : array[0..000242,1..240] of char=(
'**2iSP_Return compiler host processor'#010+
'**2iTO_Return target OS'#010+
'**2iTP_Return target processor'#010+
- '**1I<x>_Ad','d <x> to include path'#010+
+ '**','1I<x>_Add <x> to include path'#010+
'**1k<x>_Pass <x> to the linker'#010+
'**1l_Write logo'#010+
'**1M<x>_Set language mode to <x>'#010+
'**2Mfpc_Free Pascal dialect (default)'#010+
'**2Mobjfpc_FPC mode with Object Pascal support'#010+
'**2Mdelphi_Delphi 7 compatibility mode'#010+
- '**2Mtp_TP/BP 7','.0 compatibility mode'#010+
+ '**2Mtp','_TP/BP 7.0 compatibility mode'#010+
'**2Mmacpas_Macintosh Pascal dialects compatibility mode'#010+
'**1n_Do not read the default config files'#010+
'**1N<x>_Node tree optimizations'#010+
'**2Nu_Unroll loops'#010+
'**1o<x>_Change the name of the executable produced to <x>'#010+
- '**1O<x>_Opt','imizations:'#010+
+ '**1','O<x>_Optimizations:'#010+
'**2O-_Disable optimizations'#010+
'**2O1_Level 1 optimizations (quick and debugger friendly)'#010+
'**2O2_Level 2 optimizations (-O1 + quick optimizations)'#010+
'**2O3_Level 3 optimizations (-O2 + slow optimizations)'#010+
- '**2Oa<x>=<y>_Set alignment'#010+
- '**2O','o[NO]<x>_Enable or disable optimizations, see fpc -i for possibl'+
- 'e values'#010+
+ '**2Oa<x>=<y>_Set alignm','ent'#010+
+ '**2Oo[NO]<x>_Enable or disable optimizations, see fpc -i for possible '+
+ 'values'#010+
'**2Op<x>_Set target cpu for optimizing, see fpc -i for possible values'+
#010+
'**2OW<x>_Generate whole-program optimization feedback for optimization'+
- ' <x>, see fpc -i for possi','ble values'#010+
+ ' <x>, see fpc -i f','or possible values'#010+
'**2Ow<x>_Perform whole-program optimization <x>, see fpc -i for possib'+
'le values'#010+
'**2Os_Optimize for size rather than speed'#010+
'**1pg_Generate profile code for gprof (defines FPC_PROFILE)'#010+
'**1R<x>_Assembler reading style:'#010+
- '**2Rdefault_Us','e default assembler for target'#010+
+ '**2Rde','fault_Use default assembler for target'#010+
'3*2Ratt_Read AT&T style assembler'#010+
'3*2Rintel_Read Intel style assembler'#010+
'6*2RMOT_Read motorola style assembler'#010+
'**1S<x>_Syntax options:'#010+
'**2S2_Same as -Mobjfpc'#010+
- '**2Sc_Support operators like C (*=,+=,/= and -=)'#010+
- '**2S','a_Turn on assertions'#010+
+ '**2Sc_Support operators like C (*=,+=,/= and ','-=)'#010+
+ '**2Sa_Turn on assertions'#010+
'**2Sd_Same as -Mdelphi'#010+
'**2Se<x>_Error options. <x> is a combination of the following:'#010+
'**3*_<n> : Compiler halts after the <n> errors (default is 1)'#010+
'**3*_w : Compiler also halts after warnings'#010+
- '**3*_n : Compiler also halt','s after notes'#010+
+ '**3*_n : Compiler a','lso halts after notes'#010+
'**3*_h : Compiler also halts after hints'#010+
'**2Sg_Enable LABEL and GOTO (default in -Mtp and -Mdelphi)'#010+
'**2Sh_Use ansistrings by default instead of shortstrings'#010+
- '**2Si_Turn on inlining of procedures/functions declared as "inline"'#010+
- '*','*2Sk_Load fpcylix unit'#010+
+ '**2Si_Turn on inlining of procedures/functions declared as "i','nline"'#010+
+ '**2Sk_Load fpcylix unit'#010+
'**2SI<x>_Set interface style to <x>'#010+
'**3SIcom_COM compatible interface (default)'#010+
'**3SIcorba_CORBA compatible interface'#010+
'**2Sm_Support macros like C (global)'#010+
'**2So_Same as -Mtp'#010+
- '**2Ss_Constructor name must be init (destru','ctor must be done)'#010+
+ '**2Ss_Constructor name must be init',' (destructor must be done)'#010+
'**2Sx_Enable exception keywords (default in Delphi/ObjFPC modes)'#010+
'**1s_Do not call assembler and linker'#010+
'**2sh_Generate script to link on host'#010+
'**2st_Generate script to link on target'#010+
- '**2sr_Skip register allocation phase (us','e with -alr)'#010+
+ '**2sr_Skip register allocation p','hase (use with -alr)'#010+
'**1T<x>_Target operating system:'#010+
'3*2Tdarwin_Darwin/Mac OS X'#010+
'3*2Temx_OS/2 via EMX (including EMX/RSX extender)'#010+
'3*2Tfreebsd_FreeBSD'#010+
'3*2Tgo32v2_Version 2 of DJ Delorie DOS extender'#010+
- '3*2Tiphonesim_ iPhoneSimulator from iOS SDK 3.2+ ','(older versions: -T'+
+ '3*2Tiphonesim_ iPhoneSimulator from iOS S','DK 3.2+ (older versions: -T'+
'darwin)'#010+
'3*2Tlinux_Linux'#010+
'3*2Tnetbsd_NetBSD'#010+
@@ -1260,8 +1261,8 @@ const msgtxt : array[0..000242,1..240] of char=(
'3*2Topenbsd_OpenBSD'#010+
'3*2Tos2_OS/2 / eComStation'#010+
'3*2Tsunos_SunOS/Solaris'#010+
- '3*2Tsymbian_Symbian OS'#010+
- '3*','2Tsolaris_Solaris'#010+
+ '3*2Tsymbian_Symbi','an OS'#010+
+ '3*2Tsolaris_Solaris'#010+
'3*2Twatcom_Watcom compatible DOS extender'#010+
'3*2Twdosx_WDOSX DOS extender'#010+
'3*2Twin32_Windows 32 Bit'#010+
@@ -1269,7 +1270,7 @@ const msgtxt : array[0..000242,1..240] of char=(
'4*2Tdarwin_Darwin/Mac OS X'#010+
'4*2Tlinux_Linux'#010+
'4*2Twin64_Win64 (64 bit Windows systems)'#010+
- '6*2Tamiga_Commodore A','miga'#010+
+ '6*2Tamiga_Com','modore Amiga'#010+
'6*2Tatari_Atari ST/STe/TT'#010+
'6*2Tlinux_Linux'#010+
'6*2Tpalmos_PalmOS'#010+
@@ -1280,85 +1281,86 @@ const msgtxt : array[0..000242,1..240] of char=(
'P*2Tdarwin_Darwin/Mac OS X'#010+
'P*2Tlinux_Linux'#010+
'P*2Tmacos_Mac OS (classic)'#010+
- 'P*2Tmorphos_MorphOS',#010+
+ 'P*2Tmorphos','_MorphOS'#010+
'S*2Tsolaris_Solaris'#010+
'S*2Tlinux_Linux'#010+
'**1u<x>_Undefines the symbol <x>'#010+
'**1U_Unit options:'#010+
'**2Un_Do not check where the unit name matches the file name'#010+
'**2Ur_Generate release unit files (never automatically recompiled)'#010+
- '**2Us_Compile a system ','unit'#010+
+ '**2Us_Compile a',' system unit'#010+
'**1v<x>_Be verbose. <x> is a combination of the following letters:'#010+
'**2*_e : Show errors (default) 0 : Show nothing (except errors)'#010+
'**2*_w : Show warnings u : Show unit info'#010+
- '**2*_n : Show notes t : S','how tried/used files'#010+
+ '**2*_n : Show notes ',' t : Show tried/used files'#010+
'**2*_h : Show hints c : Show conditionals'#010+
'**2*_i : Show general info d : Show debug info'#010+
'**2*_l : Show linenumbers r : Rhide/GCC compatibility mode'#010+
- '**2*_s : Show time stamps ',' q : Show message numbers'#010+
+ '**2*_s : Show time stamps',' q : Show message numbers'#010+
'**2*_a : Show everything x : Executable info (Win32 only)'#010+
'**2*_b : Write file names messages p : Write tree.log with parse tre'+
'e'#010+
- '**2*_ with full path v : Write fpcdebug.txt with'#010+
- '**2*','_ lots of debugging info'#010+
+ '**2*_ with full path v : Write fpcdebug.txt w','ith'#010+
+ '**2*_ lots of debugging info'#010+
'**2*_m<x>,<y> : Don'#039't show messages numbered <x> and <y>'#010+
'3*1W<x>_Target-specific options (targets)'#010+
'A*1W<x>_Target-specific options (targets)'#010+
- 'P*1W<x>_Target-specific options (target','s)'#010+
+ 'P*1W<x>_Target-specific options',' (targets)'#010+
'p*1W<x>_Target-specific options (targets)'#010+
'3*2Wb_Create a bundle instead of a library (Darwin)'#010+
'P*2Wb_Create a bundle instead of a library (Darwin)'#010+
'p*2Wb_Create a bundle instead of a library (Darwin)'#010+
- '3*2WB_Create a relocatable image (Windo','ws)'#010+
+ '3*2WB_Create a relocatable imag','e (Windows)'#010+
'A*2WB_Create a relocatable image (Windows, Symbian)'#010+
'3*2WC_Specify console type application (EMX, OS/2, Windows)'#010+
'A*2WC_Specify console type application (Windows)'#010+
'P*2WC_Specify console type application (Classic Mac OS)'#010+
- '3*2WD_Use DEFFILE t','o export functions of DLL or EXE (Windows)'#010+
+ '3*2WD_Use D','EFFILE to export functions of DLL or EXE (Windows)'#010+
'A*2WD_Use DEFFILE to export functions of DLL or EXE (Windows)'#010+
'3*2We_Use external resources (Darwin)'#010+
'4*2We_Use external resources (Darwin)'#010+
'A*2We_Use external resources (Darwin)'#010+
- 'P*2We_Use external re','sources (Darwin)'#010+
+ 'P*2We_Use ext','ernal resources (Darwin)'#010+
'p*2We_Use external resources (Darwin)'#010+
'3*2WF_Specify full-screen type application (EMX, OS/2)'#010+
'3*2WG_Specify graphic type application (EMX, OS/2, Windows)'#010+
'A*2WG_Specify graphic type application (Windows)'#010+
- 'P*2WG_Specify graphic',' type application (Classic Mac OS)'#010+
+ 'P*2WG_Specify',' graphic type application (Classic Mac OS)'#010+
'3*2Wi_Use internal resources (Darwin)'#010+
'P*2Wi_Use internal resources (Darwin)'#010+
'p*2Wi_Use internal resources (Darwin)'#010+
'3*2WN_Do not generate relocation code, needed for debugging (Windows)'#010+
- 'A*2WN_Do not generate',' relocation code, needed for debugging (Windows'+
+ 'A*2WN_Do not ','generate relocation code, needed for debugging (Windows'+
')'#010+
'3*2WR_Generate relocation code (Windows)'#010+
'A*2WR_Generate relocation code (Windows)'#010+
'P*2WT_Specify MPW tool type application (Classic Mac OS)'#010+
'3*2WX_Enable executable stack (Linux)'#010+
- 'A*2WX_Enable e','xecutable stack (Linux)'#010+
+ 'A*2WX_','Enable executable stack (Linux)'#010+
'p*2WX_Enable executable stack (Linux)'#010+
'P*2WX_Enable executable stack (Linux)'#010+
'**1X_Executable options:'#010+
'**2Xc_Pass --shared/-dynamic to the linker (BeOS, Darwin, FreeBSD, Lin'+
'ux)'#010+
- '**2Xd_Do not use standard library search ','path (needed for cross comp'+
+ '**2Xd_Do not use standard library',' search path (needed for cross comp'+
'ile)'#010+
'**2Xe_Use external linker'#010+
'**2Xg_Create debuginfo in a separate file and add a debuglink section '+
'to executable'#010+
'**2XD_Try to link units dynamically (defines FPC_LINK_DYNAMIC)'#010+
- '**2Xi_Use internal linker'#010+
- '**2X','m_Generate link map'#010+
+ '**2Xi_Use internal lin','ker'#010+
+ '**2Xm_Generate link map'#010+
'**2XM<x>_Set the name of the '#039'main'#039' program routine (default i'+
's '#039'main'#039')'#010+
'**2XP<x>_Prepend the binutils names with the prefix <x>'#010+
'**2Xr<x>_Set the linker'#039's rlink-path to <x> (needed for cross comp'+
- 'ile, see the ld manual for',' more information) (BeOS, Linux)'#010+
+ 'ile, see the ld ma','nual for more information) (BeOS, Linux)'#010+
'**2XR<x>_Prepend <x> to all linker search paths (BeOS, Darwin, FreeBSD'+
', Linux, Mac OS, Solaris)'#010+
'**2Xs_Strip all symbols from executable'#010+
- '**2XS_Try to link units statically (default, defines FPC_LINK_STATIC)'#010+
- '*','*2Xt_Link with static libraries (-static is passed to linker)'#010+
+ '**2XS_Try to link units statically (default, defines FPC_LINK_S','TATIC'+
+ ')'#010+
+ '**2Xt_Link with static libraries (-static is passed to linker)'#010+
'**2XX_Try to smartlink units (defines FPC_LINK_SMART)'#010+
'**1*_'#010+
'**1?_Show this help'#010+
diff --git a/compiler/pdecobj.pas b/compiler/pdecobj.pas
index 58d0db1f75..25f70e6d8c 100644
--- a/compiler/pdecobj.pas
+++ b/compiler/pdecobj.pas
@@ -618,17 +618,15 @@ implementation
case token of
_TYPE :
begin
- if (([df_generic,df_specialization]*current_structdef.defoptions)=[]) and
- not(current_objectdef.objecttype in [odt_class,odt_object]) then
- Message(parser_e_type_var_const_only_in_generics_and_classes);
- consume(_TYPE);
- object_member_blocktype:=bt_type;
+ if not(current_objectdef.objecttype in [odt_class,odt_object]) then
+ Message(parser_e_type_var_const_only_in_records_and_classes);
+ consume(_TYPE);
+ object_member_blocktype:=bt_type;
end;
_VAR :
begin
- if (([df_generic,df_specialization]*current_structdef.defoptions)=[]) and
- not(current_objectdef.objecttype in [odt_class,odt_object]) then
- Message(parser_e_type_var_const_only_in_generics_and_classes);
+ if not(current_objectdef.objecttype in [odt_class,odt_object]) then
+ Message(parser_e_type_var_const_only_in_records_and_classes);
consume(_VAR);
fields_allowed:=true;
object_member_blocktype:=bt_general;
@@ -637,9 +635,8 @@ implementation
end;
_CONST:
begin
- if (([df_generic,df_specialization]*current_structdef.defoptions)=[]) and
- not(current_objectdef.objecttype in [odt_class,odt_object]) then
- Message(parser_e_type_var_const_only_in_generics_and_classes);
+ if not(current_objectdef.objecttype in [odt_class,odt_object]) then
+ Message(parser_e_type_var_const_only_in_records_and_classes);
consume(_CONST);
object_member_blocktype:=bt_const;
end;
diff --git a/compiler/pdecvar.pas b/compiler/pdecvar.pas
index 00e80dd3de..41016ec0c0 100644
--- a/compiler/pdecvar.pas
+++ b/compiler/pdecvar.pas
@@ -1428,21 +1428,15 @@ implementation
until not try_to_consume(_COMMA);
consume(_COLON);
- { Don't search in the recordsymtable for types (can be nested!) }
+ { Don't search for types where they can't be:
+ types can be only in objects, classes and records.
+ This just speedup the search a bit. }
recstlist.count:=0;
- if ([df_generic,df_specialization]*tdef(recst.defowner).defoptions=[]) and
- not is_class_or_object(tdef(recst.defowner)) and
- not is_record(tdef(recst.defowner)) then
+ if not is_class_or_object(tdef(recst.defowner)) and
+ not is_record(tdef(recst.defowner)) then
begin
recstlist.add(recst);
symtablestack.pop(recst);
- while (symtablestack.top.symtabletype=recordsymtable) and
- ([df_generic,df_specialization]*tdef(symtablestack.top.defowner).defoptions=[]) do
- begin
- recst:=tabstractrecordsymtable(symtablestack.top);
- recstlist.add(recst);
- symtablestack.pop(recst);
- end;
end;
read_anon_type(hdef,false);
{ allow only static fields reference to struct where they are declared }