From 4ea8448c6dbf301e5113f96e765a3226a083fb4f Mon Sep 17 00:00:00 2001 From: daniel Date: Sun, 1 Jul 2007 09:05:11 +0000 Subject: [PATCH] + Warn when converting pointers to signed types. git-svn-id: trunk@7884 - --- compiler/msg/errore.msg | 15 +- compiler/msgidx.inc | 6 +- compiler/msgtxt.inc | 498 ++++++++++++++++++++-------------------- compiler/ncnv.pas | 3 + 4 files changed, 270 insertions(+), 252 deletions(-) diff --git a/compiler/msg/errore.msg b/compiler/msg/errore.msg index f306127391..1959b06a2f 100644 --- a/compiler/msg/errore.msg +++ b/compiler/msg/errore.msg @@ -354,7 +354,7 @@ scan_w_unsupported_switch_by_target=02082_W_The switch "$1" is not supported by # # Parser # -# 03192 is the last used one +# 03235 is the last used one # % \section{Parser messages} % This section lists all parser messages. The parser takes care of the @@ -1134,11 +1134,17 @@ parser_e_initialized_not_for_external=03233_E_Cannot initialize variables declar % Variables declared as external can not be initialized with a default value. parser_e_illegal_function_result=03234_E_Illegal function result type % Some types like file types can not be used as function result. +parser_e_no_common_type=03235_E_No common type possible between "$1" and "$2" +% To perform an operation beween integers, the compiler converts both operands +% to their common type, which appears to be an invalid type. To determine the +% common type of the operands, the compiler takes the minimum of the minimal values +% of both types, and the maximum of the maximal values of both types. The common +% type is then minimum..maximum. % \end{description} # # Type Checking # -# 04049 is the last used one +# 04082 is the last used one # % \section{Type checking errors} % This section lists all errors that can occur when type checking is @@ -1408,6 +1414,11 @@ type_h_convert_sub_operands_to_prevent_overflow=04080_H_Converting the operands type_h_convert_mul_operands_to_prevent_overflow=04081_H_Converting the operands to "$1" before doing the multiply could prevent overflow errors. % Multiplying two types can cause overflow errors. Since you are converting the result to a larger type, you % could prevent such errors by converting the operands to this type before doing the multiplication. +type_w_pointer_to_signed=04082_W_Converting pointers to signed types is a bad idea. +% The virtual address space on 32-bit machines runs from $00000000 to $ffffffff. Many operating systems allow you to +% allocate memory above $80000000, for example both Windows and Linux allow pointers in the range $0000000 to $bfffffff. +% If you convert pointers to signed types, this can cause overflow and range check errors, but also $80000000 < $7fffffff. +% This can cause random errors in code like "if p>q". % \end{description} # # Symtable diff --git a/compiler/msgidx.inc b/compiler/msgidx.inc index 6c4d2626d2..04f0081c67 100644 --- a/compiler/msgidx.inc +++ b/compiler/msgidx.inc @@ -320,6 +320,7 @@ const parser_f_no_anonymous_specializations=03232; parser_e_initialized_not_for_external=03233; parser_e_illegal_function_result=03234; + parser_e_no_common_type=03235; type_e_mismatch=04000; type_e_incompatible_types=04001; type_e_not_equal_types=04002; @@ -392,6 +393,7 @@ const type_h_convert_add_operands_to_prevent_overflow=04079; type_h_convert_sub_operands_to_prevent_overflow=04080; type_h_convert_mul_operands_to_prevent_overflow=04081; + type_w_pointer_to_signed=04082; sym_e_id_not_found=05000; sym_f_internal_error_in_symtablestack=05001; sym_e_duplicate_id=05002; @@ -726,9 +728,9 @@ const option_info=11024; option_help_pages=11025; - MsgTxtSize = 43459; + MsgTxtSize = 43572; MsgIdxMax : array[1..20] of longint=( - 24,83,235,82,63,49,107,22,135,60, + 24,83,236,83,63,49,107,22,135,60, 42,1,1,1,1,1,1,1,1,1 ); diff --git a/compiler/msgtxt.inc b/compiler/msgtxt.inc index 10b1b5f865..a88a947b15 100644 --- a/compiler/msgtxt.inc +++ b/compiler/msgtxt.inc @@ -361,455 +361,457 @@ const msgtxt : array[0..000181,1..240] of char=( '03232_F_Anonymous generic specializations are not allowed'#000+ '03233_E_Cannot initialize variables d','eclared as external'#000+ '03234_E_Illegal function result type'#000+ + '03235_E_No common type possible between "$1" and "$2"'#000+ '04000_E_Type mismatch'#000+ '04001_E_Incompatible types: got "$1" expected "$2"'#000+ '04002_E_Type mismatch between "$1" and "$2"'#000+ - '04003_E_Type identifier expected'#000+ - '04004_E_Variable identifier expec','ted'#000+ + '04003_E_Type',' identifier expected'#000+ + '04004_E_Variable identifier expected'#000+ '04005_E_Integer expression expected, but got "$1"'#000+ '04006_E_Boolean expression expected, but got "$1"'#000+ '04007_E_Ordinal expression expected'#000+ '04008_E_pointer type expected, but got "$1"'#000+ - '04009_E_class type expected, but got "$1"'#000+ - '04011_E_Can'#039't ','evaluate constant expression'#000+ + '04','009_E_class type expected, but got "$1"'#000+ + '04011_E_Can'#039't evaluate constant expression'#000+ '04012_E_Set elements are not compatible'#000+ '04013_E_Operation not implemented for sets'#000+ '04014_W_Automatic type conversion from floating type to COMP which is '+ - 'an integer type'#000+ - '04015_H_use DIV instead to get an integer ','result'#000+ + 'an i','nteger type'#000+ + '04015_H_use DIV instead to get an integer result'#000+ '04016_E_string types doesn'#039't match, because of $V+ mode'#000+ '04017_E_succ or pred on enums with assignments not possible'#000+ '04018_E_Can'#039't read or write variables of this type'#000+ - '04019_E_Can'#039't use readln or writeln on typed file'#000+ - '04020_E_Can'#039't us','e read or write on untyped file.'#000+ + '04019_E_Can'#039,'t use readln or writeln on typed file'#000+ + '04020_E_Can'#039't use read or write on untyped file.'#000+ '04021_E_Type conflict between set elements'#000+ '04022_W_lo/hi(dword/qword) returns the upper/lower word/dword'#000+ '04023_E_Integer or real expression expected'#000+ - '04024_E_Wrong type "$1" in array constructor'#000+ - '04025_E_Incom','patible type for arg no. $1: Got "$2", expected "$3"'#000+ + '0402','4_E_Wrong type "$1" in array constructor'#000+ + '04025_E_Incompatible type for arg no. $1: Got "$2", expected "$3"'#000+ '04026_E_Method (variable) and Procedure (variable) are not compatible'#000+ '04027_E_Illegal constant passed to internal math function'#000+ - '04028_E_Can'#039't take the address of constant expressions'#000+ - '0402','9_E_Argument can'#039't be assigned to'#000+ + '04028','_E_Can'#039't take the address of constant expressions'#000+ + '04029_E_Argument can'#039't be assigned to'#000+ '04030_E_Can'#039't assign local procedure/function to procedure variabl'+ 'e'#000+ '04031_E_Can'#039't assign values to an address'#000+ - '04032_E_Can'#039't assign values to const variable'#000+ + '04032_E_Can'#039't assign values to const varia','ble'#000+ '04033_E_Array type required'#000+ - '04034_E_interface type',' expected, but got "$1"'#000+ + '04034_E_interface type expected, but got "$1"'#000+ '04035_W_Mixing signed expressions and longwords gives a 64bit result'#000+ '04036_W_Mixing signed expressions and cardinals here may cause a range'+ ' check error'#000+ - '04037_E_Typecast has different size ($1 -> $2) in assignment'#000+ - '040','38_E_enums with assignments can'#039't be used as array index'#000+ + '04037_E_Ty','pecast has different size ($1 -> $2) in assignment'#000+ + '04038_E_enums with assignments can'#039't be used as array index'#000+ '04039_E_Class or Object types "$1" and "$2" are not related'#000+ '04040_W_Class types "$1" and "$2" are not related'#000+ - '04041_E_Class or interface type expected, but got "$1"'#000+ - '04042_E_Type "$1" ','is not completely defined'#000+ + '04041_E_Class or in','terface type expected, but got "$1"'#000+ + '04042_E_Type "$1" is not completely defined'#000+ '04043_W_String literal has more characters than short string length'#000+ '04044_W_Comparison is always false due to range of values'#000+ - '04045_W_Comparison is always true due to range of values'#000+ - '04046_W_Constructing a class "$','1" with abstract methods'#000+ + '04045_W_Comparison is always true ','due to range of values'#000+ + '04046_W_Constructing a class "$1" with abstract methods'#000+ '04047_H_The left operand of the IN operator should be byte sized'#000+ '04048_W_Type size mismatch, possible loss of data / range check error'#000+ - '04049_H_Type size mismatch, possible loss of data / range check error'#000+ - '04050_E_Th','e address of an abstract method can'#039't be taken'#000+ + '04049_H_Type size mismatch',', possible loss of data / range check erro'+ + 'r'#000+ + '04050_E_The address of an abstract method can'#039't be taken'#000+ '04051_E_Assignments to formal parameters and open arrays are not possi'+ 'ble'#000+ '04052_E_Constant Expression expected'#000+ - '04053_E_Operation "$1" not supported for types "$2" and "$3"'#000+ - '04054_E_Illegal type ','conversion: "$1" to "$2"'#000+ + '04053_E_Operation "$1" not s','upported for types "$2" and "$3"'#000+ + '04054_E_Illegal type conversion: "$1" to "$2"'#000+ '04055_H_Conversion between ordinals and pointers is not portable'#000+ '04056_W_Conversion between ordinals and pointers is not portable'#000+ - '04057_E_Can'#039't determine which overloaded function to call'#000+ - '04058_E_Illegal counter var','iable'#000+ + '04057_E_Can'#039't determine which o','verloaded function to call'#000+ + '04058_E_Illegal counter variable'#000+ '04059_W_Converting constant real value to double for C variable argume'+ 'nt, add explicit typecast to prevent this.'#000+ '04060_E_Class or COM interface type expected, but got "$1"'#000+ - '04061_E_Constant packed arrays are not yet supported'#000+ - '04062_E_I','ncompatible type for arg no. $1: Got "$2" expected "(Bit)Pa'+ - 'cked Array"'#000+ + '04061_E_','Constant packed arrays are not yet supported'#000+ + '04062_E_Incompatible type for arg no. $1: Got "$2" expected "(Bit)Pack'+ + 'ed Array"'#000+ '04063_E_Incompatible type for arg no. $1: Got "$2" expected "(not pack'+ 'ed) Array"'#000+ - '04064_E_Elements of packed arrays cannot be of a type which need to be'+ - ' initialised'#000+ - '04065','_E_Constant packed records and objects are not yet supported'#000+ + '04064_E_Elements of packed arrays ','cannot be of a type which need to '+ + 'be initialised'#000+ + '04065_E_Constant packed records and objects are not yet supported'#000+ '04066_W_Arithmetic "$1" on untyped pointer is unportable to {$T+}, sug'+ 'gest typecast'#000+ - '04076_E_Can'#039't take address of a subroutine marked as local'#000+ - '04077_E_Can'#039't export subroutine mark','ed as local from a unit'#000+ + '04076_E_Can'#039't take address of a subroutin','e marked as local'#000+ + '04077_E_Can'#039't export subroutine marked as local from a unit'#000+ '04078_E_Type is not automatable: "$1"'#000+ '04079_H_Converting the operands to "$1" before doing the add could pre'+ 'vent overflow errors.'#000+ - '04080_H_Converting the operands to "$1" before doing the subtract coul'+ - 'd prevent overfl','ow errors.'#000+ + '04080_H_Converting the operands ','to "$1" before doing the subtract co'+ + 'uld prevent overflow errors.'#000+ '04081_H_Converting the operands to "$1" before doing the multiply coul'+ 'd prevent overflow errors.'#000+ - '05000_E_Identifier not found "$1"'#000+ + '04082_W_Converting pointers to signed types is a bad idea.'#000+ + '05000_E_Identifier ','not found "$1"'#000+ '05001_F_Internal Error in SymTableStack()'#000+ '05002_E_Duplicate identifier "$1"'#000+ - '05003_H_Identifier alr','eady defined in $1 at line $2'#000+ + '05003_H_Identifier already defined in $1 at line $2'#000+ '05004_E_Unknown identifier "$1"'#000+ '05005_E_Forward declaration not solved "$1"'#000+ - '05007_E_Error in type definition'#000+ + '05007_E_Error in type',' definition'#000+ '05009_E_Forward type not resolved "$1"'#000+ - '05010_E_Only static variables can be used in static methods or',' outsi'+ - 'de methods'#000+ + '05010_E_Only static variables can be used in static methods or outside'+ + ' methods'#000+ '05012_F_record or class type expected'#000+ '05013_E_Instances of classes or objects with an abstract method are no'+ - 't allowed'#000+ + 't ','allowed'#000+ '05014_W_Label not defined "$1"'#000+ '05015_E_Label used but not defined "$1"'#000+ - '05016_E_Illegal label declaration'#000, + '05016_E_Illegal label declaration'#000+ '05017_E_GOTO and LABEL are not supported (use switch -Sg)'#000+ '05018_E_Label not found'#000+ '05019_E_identifier isn'#039't a label'#000+ - '05020_E_label already defined'#000+ + '05020_E_labe','l already defined'#000+ '05021_E_illegal type declaration of set elements'#000+ - '05022_E_Forward class definition not resolved ','"$1"'#000+ + '05022_E_Forward class definition not resolved "$1"'#000+ '05023_H_Unit "$1" not used in $2'#000+ '05024_H_Parameter "$1" not used'#000+ '05025_N_Local variable "$1" not used'#000+ - '05026_H_Value parameter "$1" is assigned but never used'#000+ + '05026_H_Value parame','ter "$1" is assigned but never used'#000+ '05027_N_Local variable "$1" is assigned but never used'#000+ - '05028_H_Local $1 "$2" ','is not used'#000+ + '05028_H_Local $1 "$2" is not used'#000+ '05029_N_Private field "$1.$2" is never used'#000+ '05030_N_Private field "$1.$2" is assigned but never used'#000+ - '05031_N_Private method "$1.$2" never used'#000+ + '05031_N_Privat','e method "$1.$2" never used'#000+ '05032_E_Set type expected'#000+ '05033_W_Function result does not seem to be set'#000+ - '05034_W_Typ','e "$1" is not aligned correctly in current record for C'#000+ + '05034_W_Type "$1" is not aligned correctly in current record for C'#000+ '05035_E_Unknown record field identifier "$1"'#000+ - '05036_W_Local variable "$1" does not seem to be initialized'#000+ + '05036_W_Local variable "$1','" does not seem to be initialized'#000+ '05037_W_Variable "$1" does not seem to be initialized'#000+ - '05038_E_identifier idents',' no member "$1"'#000+ + '05038_E_identifier idents no member "$1"'#000+ '05039_H_Found declaration: $1'#000+ '05040_E_Data element too large'#000+ - '05042_E_No matching implementation for interface method "$1" found'#000+ + '05042_E_No matching implementation for interface m','ethod "$1" found'#000+ '05043_W_Symbol "$1" is deprecated'#000+ '05044_W_Symbol "$1" is not portable'#000+ - '05055_W_Symbol "$1" is not',' implemented'#000+ + '05055_W_Symbol "$1" is not implemented'#000+ '05056_E_Can'#039't create unique type from this type'#000+ '05057_H_Local variable "$1" does not seem to be initialized'#000+ - '05058_H_Variable "$1" does not seem to be initialized'#000+ + '05058_','H_Variable "$1" does not seem to be initialized'#000+ '05059_W_Function result variable does not seem to initialized'#000+ - '050','60_H_Function result variable does not seem to be initialized'#000+ + '05060_H_Function result variable does not seem to be initialized'#000+ '05061_W_Variable "$1" read but nowhere assigned'#000+ - '05062_H_Found abstract method: $1'#000+ + '05062_H_Found abs','tract method: $1'#000+ '06009_E_Parameter list size exceeds 65535 bytes'#000+ '06012_E_File types must be var parameters'#000+ - '06013_','E_The use of a far pointer isn'#039't allowed there'#000+ + '06013_E_The use of a far pointer isn'#039't allowed there'#000+ '06015_E_EXPORT declared functions can'#039't be called'#000+ - '06016_W_Possible illegal call of constructor or destructor'#000+ + '06016_W_Possible illegal call ','of constructor or destructor'#000+ '06017_N_Inefficient code'#000+ '06018_W_unreachable code'#000+ - '06020_E_Abstract methods can'#039't be ','called directly'#000+ + '06020_E_Abstract methods can'#039't be called directly'#000+ '06027_DL_Register $1 weight $2 $3'#000+ '06029_DL_Stack frame is omitted'#000+ - '06031_E_Object or class methods can'#039't be inline.'#000+ + '06031_E_Object or class methods can'#039't be inli','ne.'#000+ '06032_E_Procvar calls cannot be inline.'#000+ '06033_E_No code for inline procedure stored'#000+ - '06035_E_Element zero of a','n ansi/wide- or longstring can'#039't be acc'+ - 'essed, use (set)length instead'#000+ - '06037_E_Constructors or destructors can not be called inside a '#039'wi'+ - 'th'#039' clause'#000+ + '06035_E_Element zero of an ansi/wide- or longstring can'#039't be acces'+ + 'sed, use (set)length instead'#000+ + '06037_E_Constructors or destructors can not be called ins','ide a '#039'w'+ + 'ith'#039' clause'#000+ '06038_E_Cannot call message handler methods directly'#000+ - '06039_E_Jump in or outside of an excepti','on block'#000+ + '06039_E_Jump in or outside of an exception block'#000+ '06040_E_Control flow statements aren'#039't allowed in a finally block'#000+ - '06041_W_Parameters size exceeds limit for certain cpu'#039's'#000+ + '06041_W_Parameters size exceeds limit for certain cp','u'#039's'#000+ '06042_W_Local variable size exceed limit for certain cpu'#039's'#000+ - '06043_E_Local variables size exceeds supported lim','it'#000+ + '06043_E_Local variables size exceeds supported limit'#000+ '06044_E_BREAK not allowed'#000+ '06045_E_CONTINUE not allowed'#000+ - '06046_F_Unknown compilerproc "$1". Check if you use the correct run ti'+ - 'me library.'#000+ + '06046_F_Unknown compilerproc "$1". Check if you use the correct run t', + 'ime library.'#000+ '06047_F_Cannot find system type "$1". Check if you use the correct run'+ ' time library.'#000+ - '06048_H_Inherit','ed call to abstract method ignored'#000+ + '06048_H_Inherited call to abstract method ignored'#000+ '07000_DL_Starting $1 styled assembler parsing'#000+ - '07001_DL_Finished $1 styled assembler parsing'#000+ + '07001_DL_Finished $1 styled assembler parsing'#000, '07002_E_Non-label pattern contains @'#000+ '07004_E_Error building record offset'#000+ - '07005_E_OFFSET used without identifier'#000, + '07005_E_OFFSET used without identifier'#000+ '07006_E_TYPE used without identifier'#000+ '07007_E_Cannot use local variable or parameters here'#000+ '07008_E_need to use OFFSET here'#000+ - '07009_E_need to use $ here'#000+ + '07009','_E_need to use $ here'#000+ '07010_E_Cannot use multiple relocatable symbols'#000+ - '07011_E_Relocatable symbol can only be adde','d'#000+ + '07011_E_Relocatable symbol can only be added'#000+ '07012_E_Invalid constant expression'#000+ '07013_E_Relocatable symbol is not allowed'#000+ '07014_E_Invalid reference syntax'#000+ - '07015_E_You can not reach $1 from that code'#000+ + '07015_E_You ca','n not reach $1 from that code'#000+ '07016_E_Local symbols/labels aren'#039't allowed as references'#000+ - '07017_E_Invalid base and ','index register usage'#000+ + '07017_E_Invalid base and index register usage'#000+ '07018_W_Possible error in object field handling'#000+ '07019_E_Wrong scale factor specified'#000+ - '07020_E_Multiple index register usage'#000+ + '07020_E_Multiple inde','x register usage'#000+ '07021_E_Invalid operand type'#000+ '07022_E_Invalid string as opcode operand: $1'#000+ - '07023_W_@CODE and @DAT','A not supported'#000+ + '07023_W_@CODE and @DATA not supported'#000+ '07024_E_Null label references are not allowed'#000+ '07025_E_Divide by zero in asm evaluator'#000+ - '07026_E_Illegal expression'#000+ + '07026_E_Illegal expressio','n'#000+ '07027_E_escape sequence ignored: $1'#000+ '07028_E_Invalid symbol reference'#000+ - '07029_W_Fwait can cause emulation problems',' with emu387'#000+ + '07029_W_Fwait can cause emulation problems with emu387'#000+ '07030_W_$1 without operand translated into $1P'#000+ '07031_W_ENTER instruction is not supported by Linux kernel'#000+ - '07032_W_Calling an overload function in assembler'#000+ + '07032_W_','Calling an overload function in assembler'#000+ '07033_E_Unsupported symbol type for operand'#000+ - '07034_E_Constant value out ','of bounds'#000+ + '07034_E_Constant value out of bounds'#000+ '07035_E_Error converting decimal $1'#000+ '07036_E_Error converting octal $1'#000+ '07037_E_Error converting binary $1'#000+ - '07038_E_Error converting hexadecimal $1'#000+ + '07038_E_Erro','r converting hexadecimal $1'#000+ '07039_H_$1 translated to $2'#000+ '07040_W_$1 is associated to an overloaded function'#000+ - '07041_','E_Cannot use SELF outside a method'#000+ + '07041_E_Cannot use SELF outside a method'#000+ '07042_E_Cannot use OLDEBP outside a nested procedure'#000+ - '07043_W_Procedures can'#039't return any value in asm code'#000+ + '07043_W_Procedures can'#039't return any val','ue in asm code'#000+ '07044_E_SEG not supported'#000+ '07045_E_Size suffix and destination or source size do not match'#000+ - '07046_W_','Size suffix and destination or source size do not match'#000+ + '07046_W_Size suffix and destination or source size do not match'#000+ '07047_E_Assembler syntax error'#000+ - '07048_E_Invalid combination of opcode and operands'#000+ + '07048_E_Invalid combination of opcode an','d operands'#000+ '07049_E_Assembler syntax error in operand'#000+ '07050_E_Assembler syntax error in constant'#000+ - '07051_E_Invalid S','tring expression'#000+ + '07051_E_Invalid String expression'#000+ '07052_W_constant with symbol $1 for address which is not on a pointer'#000+ '07053_E_Unrecognized opcode $1'#000+ - '07054_E_Invalid or missing opcode'#000+ + '07054_E_I','nvalid or missing opcode'#000+ '07055_E_Invalid combination of prefix and opcode: $1'#000+ - '07056_E_Invalid combination of over','ride and opcode: $1'#000+ + '07056_E_Invalid combination of override and opcode: $1'#000+ '07057_E_Too many operands on line'#000+ '07058_W_NEAR ignored'#000+ '07059_W_FAR ignored'#000+ - '07060_E_Duplicate local symbol $1'#000+ + '07060_E_Duplicate local symbol $','1'#000+ '07061_E_Undefined local symbol $1'#000+ '07062_E_Unknown label identifier $1'#000+ '07063_E_Invalid register name'#000+ - '07064_E_Inv','alid floating point register name'#000+ + '07064_E_Invalid floating point register name'#000+ '07066_W_Modulo not supported'#000+ '07067_E_Invalid floating point constant $1'#000+ - '07068_E_Invalid floating point expression'#000+ + '07068_E_Invalid float','ing point expression'#000+ '07069_E_Wrong symbol type'#000+ '07070_E_Cannot index a local var or parameter with a register'#000+ - '0707','1_E_Invalid segment override expression'#000+ + '07071_E_Invalid segment override expression'#000+ '07072_W_Identifier $1 supposed external'#000+ '07073_E_Strings not allowed as constants'#000+ - '07074_No type of variable specified'#000+ + '07074_','No type of variable specified'#000+ '07075_E_assembler code not returned to text section'#000+ - '07076_E_Not a directive or loca','l symbol $1'#000+ + '07076_E_Not a directive or local symbol $1'#000+ '07077_E_Using a defined name as a local label'#000+ '07078_E_Dollar token is used without an identifier'#000+ - '07079_W_32bit constant created for address'#000+ + '07079_W_32bit cons','tant created for address'#000+ '07080_N_.align is target specific, use .balign or .p2align'#000+ - '07081_E_Can'#039't access fields d','irectly for parameters'#000+ + '07081_E_Can'#039't access fields directly for parameters'#000+ '07082_E_Can'#039't access fields of objects/classes directly'#000+ - '07083_E_No size specified and unable to determine the size of the oper'+ - 'ands'#000+ + '07083_E_No size specified and unable to determin','e the size of the op'+ + 'erands'#000+ '07084_E_Cannot use RESULT in this function'#000+ - '07086_W_"$1" without operand translated int','o "$1 %st,%st(1)"'#000+ + '07086_W_"$1" without operand translated into "$1 %st,%st(1)"'#000+ '07087_W_"$1 %st(n)" translated into "$1 %st,%st(n)"'#000+ '07088_W_"$1 %st(n)" translated into "$1 %st(n),%st"'#000+ - '07089_E_Char < not allowed here'#000+ + '07089','_E_Char < not allowed here'#000+ '07090_E_Char > not allowed here'#000+ '07093_W_ALIGN not supported'#000+ - '07094_E_Inc and Dec cannot',' be together'#000+ + '07094_E_Inc and Dec cannot be together'#000+ '07095_E_Invalid reglist for movem'#000+ '07096_E_Reglist invalid for opcode'#000+ '07097_E_Higher cpu mode required ($1)'#000+ - '07098_W_No size specified and unable to determine the size of the oper'+ - 'ands, using DWORD as default'#000+ - '07099_E_Syntax error ','while trying to parse a shifter operand'#000+ + '07098_W','_No size specified and unable to determine the size of the op'+ + 'erands, using DWORD as default'#000+ + '07099_E_Syntax error while trying to parse a shifter operand'#000+ '07100_E_Address of packed component is not at a byte boundary'#000+ - '07101_W_No size specified and unable to determine the size of the oper'+ - 'ands, using BYTE as default'#000+ - '07102_W_Use of +offset(%ebp) for paramet','ers invalid here'#000+ + '07101_W_No size specified',' and unable to determine the size of the op'+ + 'erands, using BYTE as default'#000+ + '07102_W_Use of +offset(%ebp) for parameters invalid here'#000+ '07103_W_Use of +offset(%ebp) is not compatible with regcall convention'+ #000+ - '07104_W_Use of -offset(%ebp) is not recommended for local variable acc'+ - 'ess'#000+ + '07104_W_Use of -offset(%ebp) is not rec','ommended for local variable a'+ + 'ccess'#000+ '07105_W_Use of -offset(%esp), access may cause a crash or value may be'+ ' lost'#000+ - '07','106_E_VMTOffset must be used in combination with a virtual method,'+ - ' and "$1" is not virtual'#000+ + '07106_E_VMTOffset must be used in combination with a virtual method, a'+ + 'nd "$1" is not virtual'#000+ '08000_F_Too many assembler files'#000+ - '08001_F_Selected assembler output not supported'#000+ + '080','01_F_Selected assembler output not supported'#000+ '08002_F_Comp not supported'#000+ - '08003_F_Direct not support for binary wri','ters'#000+ + '08003_F_Direct not support for binary writers'#000+ '08004_E_Allocating of data is only allowed in bss section'#000+ '08005_F_No binary writer selected'#000+ - '08006_E_Asm: Opcode $1 not in table'#000+ + '08006_E_Asm: Opcode $1 not in ','table'#000+ '08007_E_Asm: $1 invalid combination of opcode and operands'#000+ '08008_E_Asm: 16 Bit references not supported'#000+ - '080','09_E_Asm: Invalid effective address'#000+ + '08009_E_Asm: Invalid effective address'#000+ '08010_E_Asm: Immediate or reference expected'#000+ '08011_E_Asm: $1 value exceeds bounds $2'#000+ - '08012_E_Asm: Short jump is out of range $1'#000+ + '08012_','E_Asm: Short jump is out of range $1'#000+ '08013_E_Asm: Undefined label $1'#000+ - '08014_E_Asm: Comp type not supported for thi','s target'#000+ + '08014_E_Asm: Comp type not supported for this target'#000+ '08015_E_Asm: Extended type not supported for this target'#000+ '08016_E_Asm: Duplicate label $1'#000+ - '08017_E_Asm: Redefined label $1'#000+ + '08017_E_Asm: Redefined label ','$1'#000+ '08018_E_Asm: First defined here'#000+ '08019_E_Asm: Invalid register $1'#000+ - '08020_E_Asm: 16 or 32 Bit references not supp','orted'#000+ + '08020_E_Asm: 16 or 32 Bit references not supported'#000+ '08021_E_Asm: 64 Bit operands not supported'#000+ '09000_W_Source operating system redefined'#000+ '09001_I_Assembling (pipe) $1'#000+ - '09002_E_Can'#039't create assembler file: $1'#000+ + '09002_E','_Can'#039't create assembler file: $1'#000+ '09003_E_Can'#039't create object file: $1'#000+ '09004_E_Can'#039't create archive file: $1'#000+ - '09005','_E_Assembler $1 not found, switching to external assembling'#000+ + '09005_E_Assembler $1 not found, switching to external assembling'#000+ '09006_T_Using assembler: $1'#000+ - '09007_E_Error while assembling exitcode $1'#000+ + '09007_E_Error while assembling exitcode',' $1'#000+ '09008_E_Can'#039't call the assembler, error $1 switching to external a'+ 'ssembling'#000+ '09009_I_Assembling $1'#000+ - '09010_I_Ass','embling with smartlinking $1'#000+ + '09010_I_Assembling with smartlinking $1'#000+ '09011_W_Object $1 not found, Linking may fail !'#000+ '09012_W_Library $1 not found, Linking may fail !'#000+ - '09013_E_Error while linking'#000+ + '0','9013_E_Error while linking'#000+ '09014_E_Can'#039't call the linker, switching to external linking'#000+ '09015_I_Linking $1'#000+ - '09016_','E_Util $1 not found, switching to external linking'#000+ + '09016_E_Util $1 not found, switching to external linking'#000+ '09017_T_Using util $1'#000+ '09018_E_Creation of Executables not supported'#000+ - '09019_E_Creation of Dynamic/Shared Libraries not supported'#000+ + '09019_E_','Creation of Dynamic/Shared Libraries not supported'#000+ '09020_I_Closing script $1'#000+ - '09021_E_resource compiler not found,',' switching to external mode'#000+ + '09021_E_resource compiler not found, switching to external mode'#000+ '09022_I_Compiling resource $1'#000+ '09023_T_unit $1 can'#039't be statically linked, switching to smart lin'+ - 'king'#000+ + 'kin','g'#000+ '09024_T_unit $1 can'#039't be smart linked, switching to static linking'+ #000+ - '09025_T_unit $1 can'#039't be shared linked, swit','ching to static link'+ - 'ing'#000+ + '09025_T_unit $1 can'#039't be shared linked, switching to static linkin'+ + 'g'#000+ '09026_E_unit $1 can'#039't be smart or static linked'#000+ '09027_E_unit $1 can'#039't be shared or static linked'#000+ - '09028_D_Calling resource compiler "$1" with "$2" as command line'#000+ + '09028_','D_Calling resource compiler "$1" with "$2" as command line'#000+ '09128_F_Can'#039't post process executable $1'#000+ - '09129_F_Can'#039't',' open executable $1'#000+ + '09129_F_Can'#039't open executable $1'#000+ '09130_X_Size of Code: $1 bytes'#000+ '09131_X_Size of initialized data: $1 bytes'#000+ - '09132_X_Size of uninitialized data: $1 bytes'#000+ + '09132_X_Size of uninitialized dat','a: $1 bytes'#000+ '09133_X_Stack space reserved: $1 bytes'#000+ '09134_X_Stack space committed: $1 bytes'#000+ - '10000_T_Unitsearch: $1',#000+ + '10000_T_Unitsearch: $1'#000+ '10001_T_PPU Loading $1'#000+ '10002_U_PPU Name: $1'#000+ '10003_U_PPU Flags: $1'#000+ '10004_U_PPU Crc: $1'#000+ '10005_U_PPU Time: $1'#000+ - '10006_U_PPU File too short'#000+ + '10006_U_PPU File to','o short'#000+ '10007_U_PPU Invalid Header (no PPU at the begin)'#000+ '10008_U_PPU Invalid Version $1'#000+ - '10009_U_PPU is compiled f','or another processor'#000+ + '10009_U_PPU is compiled for another processor'#000+ '10010_U_PPU is compiled for an other target'#000+ '10011_U_PPU Source: $1'#000+ '10012_U_Writing $1'#000+ - '10013_F_Can'#039't Write PPU-File'#000+ + '10013_F_Can'#039't Write ','PPU-File'#000+ '10014_F_Error reading PPU-File'#000+ '10015_F_unexpected end of PPU-File'#000+ '10016_F_Invalid PPU-File entry: $1'#000+ - '100','17_F_PPU Dbx count problem'#000+ + '10017_F_PPU Dbx count problem'#000+ '10018_E_Illegal unit name: $1'#000+ '10019_F_Too much units'#000+ - '10020_F_Circular unit reference between $1 and $2'#000+ + '10020_F_Circular unit reference between $1 and ','$2'#000+ '10021_F_Can'#039't compile unit $1, no sources available'#000+ '10022_F_Can'#039't find unit $1 used by $2'#000+ - '10023_W_Unit $1 was ','not found but $2 exists'#000+ + '10023_W_Unit $1 was not found but $2 exists'#000+ '10024_F_Unit $1 searched but $2 found'#000+ '10025_W_Compiling the system unit requires the -Us switch'#000+ - '10026_F_There were $1 errors compiling module, stopping'#000+ + '10026_F','_There were $1 errors compiling module, stopping'#000+ '10027_U_Load from $1 ($2) unit $3'#000+ - '10028_U_Recompiling $1, checks','um changed for $2'#000+ + '10028_U_Recompiling $1, checksum changed for $2'#000+ '10029_U_Recompiling $1, source found only'#000+ '10030_U_Recompiling unit, static lib is older than ppufile'#000+ - '10031_U_Recompiling unit, shared lib is older than ppufile'#000+ + '10031_U_','Recompiling unit, shared lib is older than ppufile'#000+ '10032_U_Recompiling unit, obj and asm are older than ppufile'#000+ - '1','0033_U_Recompiling unit, obj is older than asm'#000+ + '10033_U_Recompiling unit, obj is older than asm'#000+ '10034_U_Parsing interface of $1'#000+ '10035_U_Parsing implementation of $1'#000+ - '10036_U_Second load for unit $1'#000+ + '10036_U_Sec','ond load for unit $1'#000+ '10037_U_PPU Check file $1 time $2'#000+ - '10040_W_Can'#039't recompile unit $1, but found modifed include',' files'+ - #000+ + '10040_W_Can'#039't recompile unit $1, but found modifed include files'#000+ '10041_U_File $1 is newer than PPU file $2'#000+ '10042_U_Trying to use a unit which was compiled with a different FPU m'+ 'ode'#000+ - '10043_U_Loading interface units from $1'#000+ + '1004','3_U_Loading interface units from $1'#000+ '10044_U_Loading implementation units from $1'#000+ - '10045_U_Interface CRC changed fo','r unit $1'#000+ + '10045_U_Interface CRC changed for unit $1'#000+ '10046_U_Implementation CRC changed for unit $1'#000+ '10047_U_Finished compiling unit $1'#000+ - '10048_U_Add dependency of $1 to $2'#000+ + '10048_U_Add dependency of $1 to $2'#000, '10049_U_No reload, is caller: $1'#000+ '10050_U_No reload, already in second compile: $1'#000+ '10051_U_Flag for reload: $1'#000+ - '100','52_U_Forced reloading'#000+ + '10052_U_Forced reloading'#000+ '10053_U_Previous state of $1: $2'#000+ '10054_U_Already compiling $1, setting second compile'#000+ - '10055_U_Loading unit $1'#000+ + '10055_U_Loading uni','t $1'#000+ '10056_U_Finished loading unit $1'#000+ '10057_U_Registering new unit $1'#000+ '10058_U_Re-resolving unit $1'#000+ - '10059_U_Skippi','ng re-resolving unit $1, still loading used units'#000+ + '10059_U_Skipping re-resolving unit $1, still loading used units'#000+ '11000_O_$1 [options] [options]'#000+ - '11001_W_Only one source file supported'#000+ + '11001_W_Only one source file suppo','rted'#000+ '11002_W_DEF file can be created only for OS/2'#000+ '11003_E_nested response files are not supported'#000+ - '11004_F_No sou','rce file name in command line'#000+ + '11004_F_No source file name in command line'#000+ '11005_N_No option inside $1 config file'#000+ '11006_E_Illegal parameter: $1'#000+ - '11007_H_-? writes help pages'#000+ + '11007_H_-? writes help page','s'#000+ '11008_F_Too many config files nested'#000+ '11009_F_Unable to open file $1'#000+ '11010_D_Reading further options from $1'#000+ - '110','11_W_Target is already set to: $1'#000+ + '11011_W_Target is already set to: $1'#000+ '11012_W_Shared libs not supported on DOS platform, reverting to static'+ #000+ - '11013_F_too many IF(N)DEFs'#000+ + '11013_F_too many IF(N)','DEFs'#000+ '11014_F_too many ENDIFs'#000+ '11015_F_open conditional at the end of the file'#000+ - '11016_W_Debug information generation',' is not supported by this execut'+ - 'able'#000+ + '11016_W_Debug information generation is not supported by this executab'+ + 'le'#000+ '11017_H_Try recompiling with -dGDB'#000+ '11018_W_You are using the obsolete switch $1'#000+ - '11019_W_You are using the obsolete switch $1, please use $2'#000+ - '11020_N_Switching assembler to default source writing assembler',#000+ + '11019_W_Yo','u are using the obsolete switch $1, please use $2'#000+ + '11020_N_Switching assembler to default source writing assembler'#000+ '11021_W_Assembler output selected "$1" is not compatible with "$2"'#000+ '11022_W_"$1" assembler use forced'#000+ - '11026_T_Reading options from file $1'#000+ + '11026_T_Reading options f','rom file $1'#000+ '11027_T_Reading options from environment $1'#000+ '11028_D_Handling option "$1"'#000+ '11029__*** press enter ***'#000+ - '1','1030_H_Start of reading config file $1'#000+ + '11030_H_Start of reading config file $1'#000+ '11031_H_End of reading config file $1'#000+ '11032_D_interpreting option "$1"'#000+ - '11036_D_interpreting firstpass option "$1"'#000+ + '11036_D_interpret','ing firstpass option "$1"'#000+ '11033_D_interpreting file option "$1"'#000+ '11034_D_Reading config file "$1"'#000+ - '11035_D_found so','urce file name "$1"'#000+ + '11035_D_found source file name "$1"'#000+ '11039_E_Unknown code page'#000+ '11040_F_Config file $1 is a directory'#000+ - '11041_W_Assembler output selected "$1" cannot generate debug info, deb'+ - 'ugging disabled'#000+ - '11023_Free Pascal Compiler version $FPCFULLVERSION [$FPCDATE] for $FPC', + '11041_W_Assembler output selected "$1" cann','ot generate debug info, d'+ + 'ebugging disabled'#000+ + '11023_Free Pascal Compiler version $FPCFULLVERSION [$FPCDATE] for $FPC'+ 'CPU'#010+ 'Copyright (c) 1993-2007 by Florian Klaempfl'#000+ '11024_Free Pascal Compiler version $FPCVERSION'#010+ #010+ 'Compiler Date : $FPCDATE'#010+ - 'Compiler CPU Target: $FPCCPU'#010+ + 'C','ompiler CPU Target: $FPCCPU'#010+ #010+ 'Supported targets:'#010+ ' $OSTARGETS'#010+ #010+ 'Supported CPU instruction sets:'#010+ - ' $INSTRUCTIONSETS'#010, + ' $INSTRUCTIONSETS'#010+ #010+ 'Supported FPU instruction sets:'#010+ ' $FPUINSTRUCTIONSETS'#010+ @@ -817,239 +819,239 @@ const msgtxt : array[0..000181,1..240] of char=( 'Supported Optimizations:'#010+ ' $OPTIMIZATIONS'#010+ #010+ - 'This program comes under the GNU General Public Licence'#010+ + 'This program comes under the',' GNU General Public Licence'#010+ 'For more information read COPYING.FPC'#010+ #010+ 'Report bugs,suggestions etc to:'#010+ - ' ',' bugs@freepascal.org'#000+ + ' bugs@freepascal.org'#000+ '11025_**0*_put + after a boolean switch option to enable it, - to disa'+ 'ble it'#010+ - '**1a_the compiler doesn'#039't delete the generated assembler file'#010+ + '**1a_the compiler doesn'#039't d','elete the generated assembler file'#010+ '**2al_list sourcecode lines in assembler file'#010+ - '**2an_list node info in assemble','r file'#010+ + '**2an_list node info in assembler file'#010+ '*L2ap_use pipes instead of creating temporary assembler files'#010+ - '**2ar_list register allocation/release info in assembler file'#010+ + '**2ar_list register allocation/release info in assembler f','ile'#010+ '**2at_list temp allocation/release info in assembler file'#010+ '**1A_output format:'#010+ - '**2Adefault_use default asse','mbler'#010+ + '**2Adefault_use default assembler'#010+ '3*2Aas_assemble using GNU AS'#010+ '3*2Anasmcoff_coff (Go32v2) file using Nasm'#010+ '3*2Anasmelf_elf32 (Linux) file using Nasm'#010+ - '3*2Anasmwin32_Win32 object file using Nasm'#010+ + '3*2Anas','mwin32_Win32 object file using Nasm'#010+ '3*2Anasmwdosx_Win32/WDOSX object file using Nasm'#010+ - '3*2Awasm_obj file using Wasm',' (Watcom)'#010+ + '3*2Awasm_obj file using Wasm (Watcom)'#010+ '3*2Anasmobj_obj file using Nasm'#010+ '3*2Amasm_obj file using Masm (Microsoft)'#010+ '3*2Atasm_obj file using Tasm (Borland)'#010+ - '3*2Aelf_elf32 (Linux) using internal writer'#010+ + '3*2Ae','lf_elf32 (Linux) using internal writer'#010+ '3*2Acoff_coff (Go32v2) using internal writer'#010+ - '3*2Apecoff_pecoff (Win32) usi','ng internal writer'#010+ + '3*2Apecoff_pecoff (Win32) using internal writer'#010+ '4*2Aas_assemble using GNU AS'#010+ '6*2Aas_Unix o-file using GNU AS'#010+ '6*2Agas_GNU Motorola assembler'#010+ - '6*2Amit_MIT Syntax (old GAS)'#010+ + '6*2Amit_MIT Synt','ax (old GAS)'#010+ '6*2Amot_Standard Motorola assembler'#010+ 'A*2Aas_assemble using GNU AS'#010+ 'P*2Aas_assemble using GNU AS'#010+ - 'S*2Aas','_assemble using GNU AS'#010+ + 'S*2Aas_assemble using GNU AS'#010+ '**1b_generate browser info'#010+ '**2bl_generate local symbol info'#010+ '**1B_build all modules'#010+ - '**1C_code generation options:'#010+ + '**1C_code generati','on options:'#010+ '**2Cc_set default calling convention to '#010+ '**2CD_create also dynamic library (not supported)'#010+ - '**2C','e_Compilation with emulated floating point opcodes'#010+ + '**2Ce_Compilation with emulated floating point opcodes'#010+ '**2Cf_Select fpu instruction set to use, see fpc -i for possible va'+ 'lues'#010+ - '**2Cg_Generate PIC code'#010+ + '*','*2Cg_Generate PIC code'#010+ '**2Ch_ bytes heap (between 1023 and 67107840)'#010+ '**2Ci_IO-checking'#010+ - '**2Cn_omit linking s','tage'#010+ + '**2Cn_omit linking stage'#010+ '**2Co_check overflow of integer operations'#010+ '**2Cp_select instruction set, see fpc -i for possible values'#010+ - '**2CP=_ packing settings'#010+ + '**2CP=_ p','acking settings'#010+ '**3CPPACKSET=_ set allocation: 0, 1 or DEFAULT or NORMAL, 2, 4 '+ 'and 8'#010+ - '**2Cr_range checking'#010, + '**2Cr_range checking'#010+ '**2CR_verify object method call validity'#010+ '**2Cs_set stack size to '#010+ '**2Ct_stack checking'#010+ - '**2CX_create also smartlinked library'#010+ + '**2CX_create also smartlinked libr','ary'#010+ '**1d_defines the symbol '#010+ '**1D_generate a DEF file'#010+ '**2Dd_set description to '#010+ - '**2Dv_set DLL vers','ion to '#010+ + '**2Dv_set DLL version to '#010+ '*O2Dw_PM application'#010+ '**1e_set path to executable'#010+ '**1E_same as -Cn'#010+ '**1fPIC_same as -Cg'#010+ - '**1F_set file names and paths:'#010+ + '**1F_set file names and ','paths:'#010+ '**2Fa[,y]_for a program load first units and [y] before uses is'+ ' parsed'#010+ - '**2Fc_sets input codepage',' to '#010+ + '**2Fc_sets input codepage to '#010+ '**2FD_sets the directory where to search for compiler utilities'#010+ '**2Fe_redirect error output to '#010+ - '**2FE_set exe/unit output path to '#010+ + '**2FE_set e','xe/unit output path to '#010+ '**2Fi_adds to include path'#010+ '**2Fl_adds to library path'#010+ - '**2FL_uses ','as dynamic linker'#010+ + '**2FL_uses as dynamic linker'#010+ '**2Fm_load unicode conversion table from .txt in the compiler di'+ 'r'#010+ '**2Fo_adds to object path'#010+ - '**2Fr_load error message file '#010+ + '**2F','r_load error message file '#010+ '**2Fu_adds to unit path'#010+ - '**2FU_set unit output path to , overrides -','FE'#010+ + '**2FU_set unit output path to , overrides -FE'#010+ '*g1g_generate debugger information:'#010+ '*g2gc_generate checks for pointers'#010+ '*g2gd_use dbx'#010+ '*g2gg_use gsym'#010+ - '*g2gh_use heap trace unit (for memory leak debugging)'#010+ + '*g2gh_use heap trace uni','t (for memory leak debugging)'#010+ '*g2gl_use line info unit to show more info for backtraces'#010+ - '*g2gp_preserve case in st','abs symbol names'#010+ + '*g2gp_preserve case in stabs symbol names'#010+ '*g2gt_trash local variables (to detect uninitialized uses)'#010+ '*g2gv_generates programs traceable with valgrind'#010+ - '*g2gw_generate dwarf debugging info'#010+ + '*g','2gw_generate dwarf debugging info'#010+ '**1i_information'#010+ '**2iD_return compiler date'#010+ '**2iV_return compiler version'#010+ - '**2iW','_return full compiler version'#010+ + '**2iW_return full compiler version'#010+ '**2iSO_return compiler OS'#010+ '**2iSP_return compiler processor'#010+ '**2iTO_return target OS'#010+ - '**2iTP_return target processor'#010+ + '**2iTP_return ','target processor'#010+ '**1I_adds to include path'#010+ '**1k_Pass to the linker'#010+ '**1l_write logo'#010+ - '**1M_set lang','uage mode to '#010+ + '**1M_set language mode to '#010+ '**2Mfpc_free pascal dialect (default)'#010+ '**2Mobjfpc_switch some Delphi 2 extensions on'#010+ - '**2Mdelphi_tries to be Delphi compatible'#010+ + '**2Mdelphi_tries to be Del','phi compatible'#010+ '**2Mtp_tries to be TP/BP 7.0 compatible'#010+ - '**2Mmacpas_tries to be compatible to the macintosh pascal ','dialects'#010+ + '**2Mmacpas_tries to be compatible to the macintosh pascal dialects'#010+ '**1n_don'#039't read the default config file'#010+ '**1N_node tree optimizations'#010+ '**2Nu_unroll loops'#010+ - '**1o_change the name of the executable produced to '#010+ + '**1o_change the name of ','the executable produced to '#010+ '**1O_optimizations:'#010+ '**2O-_disable optimizations'#010+ - '**2O1_level 1 optimizations (qu','ick and debugger friendly)'#010+ + '**2O1_level 1 optimizations (quick and debugger friendly)'#010+ '**2O2_level 2 optimizations (-O1 + quick optimizations)'#010+ - '**2O3_level 3 optimizations (-O2 + slow optimizations)'#010+ + '**2O3_level 3 optimizations (-O2 + slow opti','mizations)'#010+ '**2Oa=_set alignment'#010+ '**2Oo[NO]_enable or disable optimizations, see fpc -i for possible '+ - 'value','s'#010+ + 'values'#010+ '**2Op_set target cpu for optimizing, see fpc -i for possible values'+ #010+ '**2Os_generate smaller code'#010+ - '**1pg_generate profile code for gprof (defines FPC_PROFILE)'#010+ + '**1pg_generate profile cod','e for gprof (defines FPC_PROFILE)'#010+ '**1R_assembler reading style:'#010+ '**2Rdefault_use default assembler'#010+ - '3*2Ratt_read',' AT&T style assembler'#010+ + '3*2Ratt_read AT&T style assembler'#010+ '3*2Rintel_read Intel style assembler'#010+ '6*2RMOT_read motorola style assembler'#010+ '**1S_syntax options:'#010+ - '**2S2_same as -Mobjfpc'#010+ + '**2S2_','same as -Mobjfpc'#010+ '**2Sc_supports operators like C (*=,+=,/= and -=)'#010+ '**2Sa_include assertion code.'#010+ - '**2Sd_same as -M','delphi'#010+ + '**2Sd_same as -Mdelphi'#010+ '**2Se_error options. is a combination of the following:'#010+ - '**3*_ : compiler stops after the errors (default is 1)'#010+ + '**3*_ : compiler stops after the errors (default i','s 1)'#010+ '**3*_w : compiler stops also after warnings'#010+ '**3*_n : compiler stops also after notes'#010+ - '**3*_h : compiler stops',' also after hints'#010+ + '**3*_h : compiler stops also after hints'#010+ '**2Sg_allow LABEL and GOTO'#010+ '**2Sh_Use ansistrings'#010+ '**2Si_support C++ styled INLINE'#010+ '**2Sk_load fpcylix unit'#010+ - '**2SI_set interface style to '#010+ + '**2S','I_set interface style to '#010+ '**3SIcom_COM compatible interface (default)'#010+ - '**3SIcorba_CORBA compatible interface',#010+ + '**3SIcorba_CORBA compatible interface'#010+ '**2Sm_support macros like C (global)'#010+ '**2So_same as -Mtp'#010+ '**2Sp_same as -Mgpc'#010+ - '**2Ss_constructor name must be init (destructor must be done)'#010+ + '**2Ss_constructor name must be init (destructor mu','st be done)'#010+ '**2St_allow static keyword in objects'#010+ - '**2Sx_enable exception keywords (default in Delphi/ObjFPC modes',')'#010+ + '**2Sx_enable exception keywords (default in Delphi/ObjFPC modes)'#010+ '**1s_don'#039't call assembler and linker'#010+ '**2sh_Generate script to link on host'#010+ '**2st_Generate script to link on target'#010+ - '**2sr_Skip register allocation phase (use with -alr)'#010+ + '**2sr_Skip',' register allocation phase (use with -alr)'#010+ '**1T_Target operating system:'#010+ - '3*2Temx_OS/2 via EMX (including EMX/R','SX extender)'#010+ + '3*2Temx_OS/2 via EMX (including EMX/RSX extender)'#010+ '3*2Tfreebsd_FreeBSD'#010+ '3*2Tgo32v2_Version 2 of DJ Delorie DOS extender'#010+ '3*2Tlinux_Linux'#010+ '3*2Tnetbsd_NetBSD'#010+ - '3*2Tnetware_Novell Netware Module (clib)'#010+ + '3*2Tnetware_','Novell Netware Module (clib)'#010+ '3*2Tnetwlibc_Novell Netware Module (libc)'#010+ '3*2Topenbsd_OpenBSD'#010+ - '3*2Tos2_OS/2 / eComSta','tion'#010+ + '3*2Tos2_OS/2 / eComStation'#010+ '3*2Tsunos_SunOS/Solaris'#010+ '3*2Twatcom_Watcom compatible DOS extender'#010+ '3*2Twdosx_WDOSX DOS extender'#010+ '3*2Twin32_Windows 32 Bit'#010+ - '3*2Twince_Windows CE'#010+ + '3*','2Twince_Windows CE'#010+ '4*2Tlinux_Linux'#010+ '6*2Tamiga_Commodore Amiga'#010+ '6*2Tatari_Atari ST/STe/TT'#010+ '6*2Tlinux_Linux/m68k'#010+ - '6*2Tm','acos_Macintosh m68k (not supported)'#010+ + '6*2Tmacos_Macintosh m68k (not supported)'#010+ '6*2Tpalmos_PalmOS'#010+ 'A*2Tlinux_Linux'#010+ 'A*2Twince_Windows CE'#010+ 'P*2Tamiga_AmigaOS on PowerPC'#010+ - 'P*2Tdarwin_Darwin and Mac OS X on PowerPC'#010+ + 'P*2Tdar','win_Darwin and Mac OS X on PowerPC'#010+ 'P*2Tlinux_Linux on PowerPC'#010+ 'P*2Tmacos_Mac OS (classic) on PowerPC'#010+ - 'P*2Tmorphos_M','orphOS'#010+ + 'P*2Tmorphos_MorphOS'#010+ 'S*2Tlinux_Linux'#010+ '**1u_undefines the symbol '#010+ '**1U_unit options:'#010+ '**2Un_don'#039't check the unit name'#010+ - '**2Ur_generate release unit files'#010+ + '**2Ur_generate relea','se unit files'#010+ '**2Us_compile a system unit'#010+ '**1v_Be verbose. is a combination of the following letters:'#010+ - '**2*','_e : Show errors (default) 0 : Show nothing (except errors'+ - ')'#010+ + '**2*_e : Show errors (default) 0 : Show nothing (except errors)'#010+ '**2*_w : Show warnings u : Show unit info'#010+ - '**2*_n : Show notes t : Show tried/used files'#010+ - '**2*_h : Show hints c : Show condition','als'#010+ + '**2*_','n : Show notes t : Show tried/used files'#010+ + '**2*_h : Show hints c : Show conditionals'#010+ '**2*_i : Show general info d : Show debug info'#010+ - '**2*_l : Show linenumbers r : Rhide/GCC compatibility mode'#010+ + '**2*_l : Show linenumbers r : Rhide/GCC compatibility m','od'+ + 'e'#010+ '**2*_a : Show everything x : Executable info (Win32 only)'#010+ - '**2*_b : Write file names messages with',' full path'#010+ + '**2*_b : Write file names messages with full path'#010+ '**2*_v : write fpcdebug.txt with p : Write tree.log with parse tre'+ 'e'#010+ '**2*_ lots of debugging info'#010+ - '3*1W_Win32-like target options'#010+ + '3*1W_Win3','2-like target options'#010+ '3*2WB_Create a relocatable image'#010+ '3*2WB_Set Image base to Hexadecimal value'#010+ - '3*2WC_Spe','cify console type application'#010+ + '3*2WC_Specify console type application'#010+ '3*2WD_Use DEFFILE to export functions of DLL or EXE'#010+ - '3*2WF_Specify full-screen type application (OS/2 only)'#010+ + '3*2WF_Specify full-screen type application (O','S/2 only)'#010+ '3*2WG_Specify graphic type application'#010+ - '3*2WN_Do not generate relocation code (necessary for debugging)'#010, + '3*2WN_Do not generate relocation code (necessary for debugging)'#010+ '3*2WR_Generate relocation code'#010+ 'P*2WC_Specify console type application (Mac OS only)'#010+ - 'P*2WG_Specify graphic type application (Mac OS only)'#010+ + 'P*2WG_Specify graphic type application (Mac',' OS only)'#010+ 'P*2WT_Specify tool type application (MPW tool, Mac OS only)'#010+ '**1X_executable options:'#010+ - '**2Xc_pass --share','d to the linker (Unix only)'#010+ + '**2Xc_pass --shared to the linker (Unix only)'#010+ '**2Xd_don'#039't use standard library search path (needed for cross com'+ 'pile)'#010+ '**2Xe_use external linker'#010+ - '**2XD_try to link units dynamic (defines FPC_LINK_DYNAMIC)'#010+ + '*','*2XD_try to link units dynamic (defines FPC_LINK_DYNAMIC)'#010+ '**2Xi_use internal linker'#010+ - '**2Xm_generate link ','map'#010+ + '**2Xm_generate link map'#010+ '**2XM_set the name of the '#039'main'#039' program routine (default i'+ 's '#039'main'#039')'#010+ - '**2XP_prepend the binutils names with the prefix '#010+ + '**2XP_prepend the binutils names with the prefix',' '#010+ '**2Xr_set library search path to (needed for cross compile)'#010+ '**2Xs_strip all symbols from executable'#010+ - '*','*2XS_try to link units static (default) (defines FPC_LINK_STATIC)'#010+ - '**2Xt_link with static libraries (-static is passed to linker)'#010+ + '**2XS_try to link units static (default) (defines FPC_LINK_STATIC)'#010+ + '**2Xt_link with static libraries (-static is passed to linker',')'#010+ '**2XX_try to link units smart (defines FPC_LINK_SMART)'#010+ '**1*_'#010+ '**1?_shows this help'#010+ - '**1h_shows this he','lp without waiting'#000 + '**1h_shows this help without waiting'#000 ); diff --git a/compiler/ncnv.pas b/compiler/ncnv.pas index 6ac1c706cb..009ba1329a 100644 --- a/compiler/ncnv.pas +++ b/compiler/ncnv.pas @@ -627,6 +627,9 @@ implementation muln: cgmessage1(type_h_convert_mul_operands_to_prevent_overflow,def.gettypename); end; + {Converting pointers to signed integers is a bad idea. Warn.} + if (node.resultdef<>nil) and (node.resultdef.typ=pointerdef) and is_signed(def) then + cgmessage(type_w_pointer_to_signed); end;