* translation of next part by Ido Kanner

git-svn-id: trunk@4262 -
This commit is contained in:
Tomas Hajny 2006-07-19 22:17:24 +00:00
parent 0e0a86428e
commit 58cbcae50b

View File

@ -2,7 +2,7 @@
# This file is part of the Free Pascal Compiler
# Copyright (c) 1999-2000 by the Free Pascal Development team
#
# Hebrew language file for Free Pascal Compiler
# Hebrew (CP1255) language file for Free Pascal Compiler
# Contributed by Ido Kanner <idokan at gmail.com> and Dotan Kamber <kamberd at yahoo.com>
# Based on errore.msg of SVN revision 4237
#
@ -868,28 +868,28 @@ parser_e_procname_to_short_for_export=03159_E_
% The length of the procedure/function name must be at least 2 characters
% long. This is because of a bug in dlltool which doesn't parse the .def
% file correct with a name of length 1.
parser_e_dlltool_unit_var_problem=03160_E_No DEFFILE entry can be generated for unit global vars
parser_e_dlltool_unit_var_problem2=03161_E_Compile without -WD option
parser_e_dlltool_unit_var_problem=03160_E_לא ניתן לייצר חלק DEFFILE למשתנים גלובליים ביחידה
parser_e_dlltool_unit_var_problem2=03161_E_הדר ללא שימוש ב -WD
% You need to compile this file without the -WD switch on the
% commandline
parser_f_need_objfpc_or_delphi_mode=03162_F_You need ObjFpc (-S2) or Delphi (-Sd) mode to compile this module
parser_f_need_objfpc_or_delphi_mode=03162_F_יש להשתמש במצב ObjFpc (-S2) או במצב Delphi (-Sd) להדר את המודול
% You need to use \{\$mode objfpc\} or \{\$mode delphi\} to compile this file.
% Or use the equivalent commandline switches -S2 or -Sd.
parser_e_no_export_with_index_for_target=03163_E_Can't export with index under $1
parser_e_no_export_with_index_for_target=03163_E_אי אפשר לייצא עם אינדקס תחת $1
% Exporting of functions or procedures with a specified index is not
% supported on this target.
parser_e_no_export_of_variables_for_target=03164_E_Exporting of variables is not supported under $1
parser_e_no_export_of_variables_for_target=03164_E_ייצוא של משתמש אינו נתמך ב$1
% Exporting of variables is not supported on this target.
parser_e_improper_guid_syntax=03165_E_Improper GUID syntax
parser_e_improper_guid_syntax=03165_E_תחביר GUID אינו חוקי
% The GUID indication does not have the proper syntax. It should be of the form
% \begin{verbatim}
% {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}
% \end{verbatim}
% Where each \var{X} represents a hexadecimal digit.
parser_w_interface_mapping_notfound=03168_W_Procedure named "$1" not found that is suitable for implementing the $2.$3
parser_w_interface_mapping_notfound=03168_W_השגרה "$1" נמצאה אך ללא הפרמטרים המבוקשים של $2.$3
% The compiler cannot find a suitable procedure which implements the given method of an interface.
% A procedure with the same name is found, but the arguments do not match.
parser_e_interface_id_expected=03169_E_interface identifier expected
parser_e_interface_id_expected=03169_E_מצפה למזהה ממשק
% This happens when the compiler scans a \var{class} declaration that contains
% \var{interface} function name mapping code like this:
% \begin{verbatim}
@ -899,53 +899,53 @@ parser_e_interface_id_expected=03169_E_interface identifier expected
% ....
% \end{verbatim}
% and the \var{interface} before the dot not listed in the inheritance list.
parser_e_type_cant_be_used_in_array_index=03170_E_Type "$1" can't be used as array index type
parser_e_type_cant_be_used_in_array_index=03170_E_הסוג "$1" אינו יכול להיות בשימוש בתור סוג אינדקס למערך
% Types like \var{qword} or \var{int64} aren't allowed as array index type
parser_e_no_con_des_in_interfaces=03171_E_Con- and destructors aren't allowed in interfaces
parser_e_no_con_des_in_interfaces=03171_E_יוצר והורס אינם מורשים בממשקים
% Constructor and destructor declarations aren't allowed in interface
% In the most cases the method \var{QueryInterface} of \var{IUnknown} can
% be used to create a new interface.
parser_e_no_access_specifier_in_interfaces=03172_E_Access specifiers can't be used in INTERFACES
parser_e_no_access_specifier_in_interfaces=03172_E_מזהה כניסה אינו יכול להיות בשימוש עם ממשקים
% The access specifiers \var{public}, \var{private}, \var{protected} and
% \var{pusblished} can't be used in interfaces because all methods
% of an interfaces must be public.
parser_e_no_vars_in_interfaces=03173_E_An interface can't contain fields
parser_e_no_vars_in_interfaces=03173_E_ממשק אינו יכול להכיל שדות
% Declarations of fields aren't allowed in interfaces. An interface
% can contain only methods
parser_e_no_local_proc_external=03174_E_Can't declare local procedure as EXTERNAL
parser_e_no_local_proc_external=03174_E_לא ניתן להגדיר שגרה מקומית כחיצונית
% Declaring local procedures as external is not possible. Local procedures
% get hidden parameters that will make the chance of errors very high
parser_w_skipped_fields_before=03175_W_Some fields coming before "$1" weren't initialized
parser_w_skipped_fields_before=03175_W_חלק מהשדות הבאים לפני "$1" לא אותחלו
% In Delphi mode, not all fields of a typed constant record have to be
% initialized, but the compiler warns you when it detects such situations.
parser_e_skipped_fields_before=03176_E_Some fields coming before "$1" weren't initialized
parser_e_skipped_fields_before=03176_E_חלק מהשדות הבאים לפני "$1" לא אותחלו
% In all syntax modes but Delphi mode, you can't leave some fields uninitialized
% in the middle of a typed constant record
parser_w_skipped_fields_after=03177_W_Some fields coming after "$1" weren't initialized
parser_w_skipped_fields_after=03177_W_חלק מהשדות הבאים אחרי "$1" לא אותחלו
% You can leave some fields at the end of a type constant record uninitialized
% (the compiler will initialize them to zero automatically). This may be the cause
% of subtle problems.
parser_e_varargs_need_cdecl_and_external=03178_E_VarArgs directive without CDecl and External
parser_e_varargs_need_cdecl_and_external=03178_E_השימוש בVarArgs חייב להיות בשימוש עם CDecl ו External
% The varargs directive can only be used with procedures or functions
% that are declared with \var{cdecl} and \var{external} directives. The varargs directive
% is only meant to provide a compatible interface to C functions like printf.
parser_e_self_call_by_value=03179_E_Self must be a normal (call-by-value) parameter
parser_e_self_call_by_value=03179_E_Self חייב להיות פרמטר רגיל (call-by-value)
% You can't declare self as a const or var parameter, it must always be
% a call-by-value parameter
parser_e_interface_has_no_guid=03180_E_Interface "$1" has no interface identification
parser_e_interface_has_no_guid=03180_E_הממשק "$1" אינו מכיל מזהה GUID
% When you want to assign an interface to a constant, then the interface
% must have a GUID value set.
parser_e_illegal_field_or_method=03181_E_Unknown class field or method identifier "$1"
parser_e_illegal_field_or_method=03181_E_המזהה של שדה או מתודה של מחלקה "$1" אינם ידועים
% Properties must refer to a field or method in the same class.
parser_w_proc_overriding_calling=03182_W_Overriding calling convention "$1" with "$2"
parser_w_proc_overriding_calling=03182_W_עולה על מוסכמות הפעלה "$1" עם "$2"
% There are two directives in the procedure declaration that specify a calling
% convention. Only the last directive will be used
parser_e_no_procvarobj_const=03183_E_Typed constants of the type "procedure of object" can only be initialized with NIL
parser_e_no_procvarobj_const=03183_E_ניתן לאתחל טיפוס קבוע של "procedure of object" רק עם NIL
% You can't assign the address of a method to a typed constant which has a
% 'procedure of object' type, because such a constant requires two addresses:
% that of the method (which is known at compile time) and that of the object or
% class instance it operates on (which can not be known at compile time).
parser_e_default_value_only_one_para=03184_E_Default value can only be assigned to one parameter
parser_e_default_value_only_one_para=03184_E_ערך ברירת מחדל יכול להיות בשימוש רק עם פרמטר אחד
% It is not possible to specify a default value for several parameters at once.
% The following is invalid:
% \begin{verbatim}
@ -955,49 +955,49 @@ parser_e_default_value_only_one_para=03184_E_Default value can only be assigned
% \begin{verbatim}
% Procedure MyProcedure (A : Integer = 0; B : Integer = 0);
% \end{verbatim}
parser_e_default_value_expected_for_para=03185_E_Default parameter required for "$1"
parser_e_default_value_expected_for_para=03185_E_פרמטר ברירת מחדל דרוש עבור "$1"
% The specified parameter requires a default value.
parser_w_unsupported_feature=03186_W_Use of unsupported feature!
parser_w_unsupported_feature=03186_W_שימוש במאפיין לא נתמך !
% You're trying to force the compiler into doing something it cannot do yet.
parser_h_c_arrays_are_references=03187_H_C arrays are passed by reference
parser_h_c_arrays_are_references=03187_H_מערכים של C מועברים כהפניה
% Any array passed to a C functions is passed
% by a pointer (i.e. by reference).
parser_e_C_array_of_const_must_be_last=03188_E_C array of const must be the last argument
parser_e_C_array_of_const_must_be_last=03188_E_מערך C של קבוע חייב להיות הארגומנט האחרון
% You can not add any other argument after an \var{array of const} for
% \var{cdecl} functions, as the size pushed on stack for this argument is
% not known.
parser_h_type_redef=03189_H_Type "$1" redefinition
parser_h_type_redef=03189_H_הגדרה מחודשת של הטיפוס "$1"
% This is an indicator that a previously declared type is
% being redefined as something else. This may, or may not
% be, a cause for errors.
parser_w_cdecl_has_no_high=03190_W_cdecl'ared functions have no high parameter
parser_w_cdecl_has_no_high=03190_W_אין לפונקציות cdecl פרמטר גבוהה
% Functions declared with cdecl modifier do not pass an extra implicit parameter.
parser_w_cdecl_no_openstring=03191_W_cdecl'ared functions do not support open strings
parser_w_cdecl_no_openstring=03191_W_פונקציות cdecel אינן תומכות ב open string
% Openstring is not supported for cdecl'ared functions.
parser_e_initialized_not_for_threadvar=03192_E_Cannot initialize variables declared as threadvar
parser_e_initialized_not_for_threadvar=03192_E_אין אפשרות לאתחל משתנה המוגדר כthreadvar
% Variables declared as threadvar can not be initialized with a default value.
% The variables will always be filled with zero at the start of a new thread.
parser_e_msg_only_for_classes=03193_E_Message directive is only allowed in Classes
parser_e_msg_only_for_classes=03193_E_ניתן להשתמש בהנחיית message רק בתוך מחלקה
% The message directive is only supported for Class types.
parser_e_procedure_or_function_expected=03194_E_Procedure or Function expected
parser_e_procedure_or_function_expected=03194_E_מצפה לשיגרה או פונקציה
% A class method can only be specified for procedures and functions.
parser_e_illegal_calling_convention=03195_W_Calling convention directive ignored: "$1"
parser_e_illegal_calling_convention=03195_W_מתעלם ממוסכמת ההפעלה: "$1"
% Some calling conventions are supported only by certain CPUs. I.e. most non-i386 ports support
% only the standard ABI calling convention of the CPU.
parser_e_no_object_reintroduce=03196_E_REINTRODUCE can't be used in objects
parser_e_no_object_reintroduce=03196_E_לא ניתן להשתמש בREINTRODUCE בתוך אובייקט
% \var{reintroduce} is not supported for objects.
parser_e_paraloc_only_one_para=03197_E_Each argument must have its own location
parser_e_paraloc_only_one_para=03197_E_כל ארגומנט חייב להכיל מיקום עצמאי.
% If locations for arguments are specified explicitly as it is required by
% some syscall conventions, each argument must have it's only location, things
% like \var{procedure p(i,j : longint 'r1');} aren't allowed
parser_e_paraloc_all_paras=03198_E_Each argument must have an explicit location
parser_e_paraloc_all_paras=03198_E_כל ארגומנט חייב להכיל מיקום מוגדר
% If one argument has an explicit argument location, all arguments of a procedure
% must have one.
parser_e_illegal_explicit_paraloc=03199_E_Unknown argument location
parser_e_illegal_explicit_paraloc=03199_E_מיקום ארגומנט לא ידוע
% The location specified for an argument isn't recognized by the compiler
parser_e_32bitint_or_pointer_variable_expected=03200_E_32 Bit-Integer or pointer variable expected
parser_e_32bitint_or_pointer_variable_expected=03200_E_מצפה לסוג משתנה של מספר שלם 32-Bit או מצביע
% The libbase for MorphOS/AmigaOS can be give only as \var{longint}, \var{dword} or any pointer variable.
parser_e_goto_outside_proc=03201_E_Goto statements aren't allowed between different procedures
parser_e_goto_outside_proc=03201_E_לא ניתן להשמש בgoto בין שני שיגרות
% It isn't allowed to use the \var{goto} statements referencing labels outside the
% current procedure. The following example shows the problem:
% \begin{verbatim}
@ -1018,63 +1018,63 @@ parser_e_goto_outside_proc=03201_E_Goto statements aren't allowed between differ
% ...
%
% \end{verbatim}
parser_f_too_complex_proc=03202_F_Procedure too complex, it requires too much registers
parser_f_too_complex_proc=03202_F_השיגרה מסובכת מידי ודרשת שימוש של יותר מידי אוגרים
% Your procedure body is too long for the compiler. You should split the
% procedure into multiple smaller procedures.
parser_e_illegal_expression=03203_E_Illegal expression
parser_e_illegal_expression=03203_E_ביטוי לא חוקי
% This can occur under many circumstances. Mostly when trying to evaluate
% constant expressions.
parser_e_invalid_integer=03204_E_Invalid integer expression
parser_e_invalid_integer=03204_E_הביטוי של המספר השלם אינו חוקי
% You made an expression which isn't an integer, and the compiler expects the
% result to be an integer.
parser_e_invalid_qualifier=03205_E_Illegal qualifier
parser_e_invalid_qualifier=03205_E_שימוש לא חוקי במבחין
% One of the following is happening :
% \begin{itemize}
% \item You're trying to access a field of a variable that is not a record.
% \item You're indexing a variable that is not an array.
% \item You're dereferencing a variable that is not a pointer.
% \end{itemize}
parser_e_upper_lower_than_lower=03206_E_High range limit < low range limit
parser_e_upper_lower_than_lower=03206_E_טווח ההגבלה הגבוהה קטן מטווח ההגבלה הנמוכה
% You are declaring a subrange, and the lower limit is higher than the high
% limit of the range.
parser_e_macpas_exit_wrong_param=03207_E_Exit's parameter must be the name of the procedure it is used in
parser_e_macpas_exit_wrong_param=03207_E_הפרמטר של Exit חייב להיות שם השיגרה תחתיו הוא נמצא
% Non local exit is not allowed. This error occurs only in mode MacPas.
parser_e_illegal_assignment_to_count_var=03208_E_Illegal assignment to for-loop variable "$1"
parser_e_illegal_assignment_to_count_var=03208_E_הצבה לא חוקית של המשתנה בלולאת ה for "$1"
% The type of a \var{for} loop variable must be an ordinal type.
% Loop variables cannot be reals or strings. You can also not assign values to
% loop variables inside the loop (except in Delphi and TP modes). Use a while or
% repeat loop instead if you need to do something like that, since those
% constructs were built for that.
parser_e_no_local_var_external=03209_E_Can't declare local variable as EXTERNAL
parser_e_no_local_var_external=03209_E_לא ניתן להגדיר משתנים מקומיים כחיצוניים
% Declaring local variables as external is not allowed. Only global variables can reference
% to external variables.
parser_e_proc_already_external=03210_E_Procedure is already declared EXTERNAL
parser_e_proc_already_external=03210_E_השיגרה כבר מוגדרת כחיצונית
% The procedure is already declared with the EXTERNAL directive in an interface or
% forward declaration.
parser_w_implicit_uses_of_variants_unit=03211_W_Implicit uses of Variants unit
parser_w_implicit_uses_of_variants_unit=03211_W_שימוש משתמע ביחידת Variants
% The Variant type is used in the unit without any used unit using the Variants unit. The
% compiler has implicitly added the Variants unit to the uses list. To remove this warning
% the Variants unit needs to be added to the uses statement.
parser_e_no_static_method_in_interfaces=03212_E_Class and static methods can't be used in INTERFACES
parser_e_no_static_method_in_interfaces=03212_E_השימוש במחלקה ומתודות סטטיים אינם יכוליות להיות בשימוש בממשק
% The specifier \var{class} and directive \var{static} can't be used in interfaces
% because all methods of an interfaces must be public.
parser_e_arithmetic_operation_overflow=03213_E_âìéùä áôòåìä îúîèéú
% An operation on two integers values produced an overflow
parser_e_protected_or_private_expected=03214_E_Protected or private expected
parser_e_protected_or_private_expected=03214_E_מצפה לאיזור Protected או Private
% \var{strict} can be only used together with \var{protected} or \var{private}.
parser_e_illegal_slice=03215_E_SLICE can't be used outside of parameter list
parser_e_illegal_slice=03215_E_SLICE אינ יכול להיות בשימוש מחוץ לרשימת פרמטרים
% \var{slice} can be used only for arguments accepting an open array parameter
parser_e_dispinterface_cant_have_parent=03216_E_A DISPINTERFACE can't have a parent class
parser_e_dispinterface_cant_have_parent=03216_E_מחלקת DISPINTERFACE אינה יכולה להכיל הורה
% A DISPINMTERFACE is a special type of interface which can't have a parent class
parser_e_dispinterface_needs_a_guid=03217_E_A DISPINTERFACE needs a guid
parser_e_dispinterface_needs_a_guid=03217_E_DISPINTERFACE חייב GUID
% A DISPINMTERFACE always needs an interface identification
parser_w_overridden_methods_not_same_ret=03218_W_Overridden methods must have a related return type. This code may crash, it depends on a Delphi parser bug ("$2" is overriden by "$1" which has another return type)
parser_w_overridden_methods_not_same_ret=03218_W_המתודות החדשות חייבות להחזיר את אותו טיפוס נתונים. הקוד הנוכחי יכול לגרום לקריסה בעקבות באג של המפרש של דלפי (“$2” עולה על “$1” אשר מכיל טיפוס נתונים אחר בהחזרה)
% If you declare overridden methods in a class definition, they must
% have the same return type. Some versions of Delphi allow you to change the
% return type of interface methods, and even to change procedures into
% functions, but the resulting code may crash depending on the types used
% and the way the methods are called.
parser_e_dispid_must_be_ord_const=03219_E_Dispatch IDs must be ordinal constants
parser_e_dispid_must_be_ord_const=03219_E_מזהה Dispatch חייב להיות קבוע בעל ערך סידורי
% \end{description}
#
# Type Checking
@ -1085,7 +1085,7 @@ parser_e_dispid_must_be_ord_const=03219_E_Dispatch IDs must be ordinal constants
% This section lists all errors that can occur when type checking is
% performed.
% \begin{description}
type_e_mismatch=04000_E_Type mismatch
type_e_mismatch=04000_E_טיפוס נתונים לא חופף
% This can happen in many cases:
% \begin{itemize}
% \item The variable you're assigning to is of a different type than the
@ -1093,7 +1093,7 @@ type_e_mismatch=04000_E_Type mismatch
% \item You are calling a function or procedure with parameters that are
% incompatible with the parameters in the function or procedure definition.
% \end{itemize}
type_e_incompatible_types=04001_E_Incompatible types: got "$1" expected "$2"
type_e_incompatible_types=04001_E_טיפוס נתונים לא תואם: נעשה שימוש ב "$1" מצפה ל"$2"
% There is no conversion possible between the two types
% Another possiblity is that they are declared in different
% declarations:
@ -1107,28 +1107,28 @@ type_e_incompatible_types=04001_E_Incompatible types: got "$1" expected "$2"
% is due the strict type checking of pascal }
% End.
% \end{verbatim}
type_e_not_equal_types=04002_E_Type mismatch between "$1" and "$2"
type_e_not_equal_types=04002_E_אי התאמה בין טיפוסי הנתונים "$1" ו "$2"
% The types are not equal
type_e_type_id_expected=04003_E_Type identifier expected
type_e_type_id_expected=04003_E_מצפה לטיפוס נתונים
% The identifier is not a type, or you forgot to supply a type identifier.
type_e_variable_id_expected=04004_E_Variable identifier expected
type_e_variable_id_expected=04004_E_מצפה למזהה של משתנה
% This happens when you pass a constant to a routine (such as \var{Inc} var or \var{Dec})
% when it expects a variable. You can only pass variables as arguments to these functions.
type_e_integer_expr_expected=04005_E_Integer expression expected, but got "$1"
type_e_integer_expr_expected=04005_E_מצפה למספר שלם, אך התקבל "$1"
% The compiler expects an expression of type integer, but gets a different
% type.
type_e_boolean_expr_expected=04006_E_Boolean expression expected, but got "$1"
type_e_boolean_expr_expected=04006_E_מצפה לביטוי בוליאני, אך התקבל "$1"
% The expression must be a boolean type, it should be return true or
% false.
type_e_ordinal_expr_expected=04007_E_Ordinal expression expected
type_e_ordinal_expr_expected=04007_E_מצפה לטיפוס סודר
% The expression must be of ordinal type, i.e., maximum a \var{Longint}.
% This happens, for instance, when you specify a second argument
% to \var{Inc} or \var{Dec} that doesn't evaluate to an ordinal value.
type_e_pointer_type_expected=04008_E_pointer type expected, but got "$1"
type_e_pointer_type_expected=04008_E_מצפה למצביע, אך התקבל "$1"
% The variable or expression isn't of the type \var{pointer}. This
% happens when you pass a variable that isn't a pointer to \var{New}
% or \var{Dispose}.
type_e_class_type_expected=04009_E_class type expected, but got "$1"
type_e_class_type_expected=04009_E_מצפה למחלקה, אך התקבל "$1"
% The variable of expression isn't of the type \var{class}. This happens
% typically when
% \begin{enumerate}
@ -1136,88 +1136,88 @@ type_e_class_type_expected=04009_E_class type expected, but got "$1"
% \item An exception handler (\var{On}) contains a type identifier that
% isn't a class.
% \end{enumerate}
type_e_cant_eval_constant_expr=04011_E_Can't evaluate constant expression
type_e_cant_eval_constant_expr=04011_E_לא ניתן לנתח את הביטוי הקבוע
% This error can occur when the bounds of an array you declared does
% not evaluate to ordinal constants
type_e_set_element_are_not_comp=04012_E_Set elements are not compatible
type_e_set_element_are_not_comp=04012_E_האלמנטים של הקבוצה אינם תואמים
% You are trying to make an operation on two sets, when the set element types
% are not the same. The base type of a set must be the same when taking the
% union
type_e_set_operation_unknown=04013_E_Operation not implemented for sets
type_e_set_operation_unknown=04013_E_הפעולה אינה בשימוש עם קבוצות
% several binary operations are not defined for sets
% like div mod ** (also >= <= for now)
type_w_convert_real_2_comp=04014_W_Automatic type conversion from floating type to COMP which is an integer type
type_w_convert_real_2_comp=04014_W_המרה אוטומטית של טיפוס עשרוני ל COMP אשר הוא מספר שלם
% An implicit type conversion from a real type to a \var{comp} is
% encountered. Since \var{comp} is a 64 bit integer type, this may indicate
% an error.
type_h_use_div_for_int=04015_H_use DIV instead to get an integer result
type_h_use_div_for_int=04015_H_השתמש בDIV במקום על מנת לקבל תוצאה של מספר שלם
% When hints are on, then an integer division with the '/' operator will
% procuce this message, because the result will then be of type real
type_e_strict_var_string_violation=04016_E_string types doesn't match, because of $V+ mode
type_e_strict_var_string_violation=04016_E_טיפוס המחרוזת אינם תואם בגלל השימוש במתג $V+
% When compiling in \var{\{\$V+\}} mode, the string you pass as a parameter
% should be of the exact same type as the declared parameter of the procedure.
type_e_succ_and_pred_enums_with_assign_not_possible=04017_E_succ or pred on enums with assignments not possible
type_e_succ_and_pred_enums_with_assign_not_possible=04017_E_לא ניתן להציב ערכים למניות תוך שימוש בsucc או pred
% When you declared an enumeration type which has assignments in it, as in C,
% like in the following:
% \begin{verbatim}
% Tenum = (a,b,e:=5);
% \end{verbatim}
% you cannot use the \var{Succ} or \var{Pred} functions on them.
type_e_cant_read_write_type=04018_E_Can't read or write variables of this type
type_e_cant_read_write_type=04018_E_לא ניתן לקרוא או לכתוב משתנים מהסוג הנוכחי
% You are trying to \var{read} or \var{write} a variable from or to a
% file of type text, which doesn't support that. Only integer types,
% reals, pchars and strings can be read from/written to a text file.
% Booleans can only be written to text files.
type_e_no_readln_writeln_for_typed_file=04019_E_Can't use readln or writeln on typed file
type_e_no_readln_writeln_for_typed_file=04019_E_לא ניתן להשתמש בreadln וwriteln על טיפוס נתונים מסוג file
% \var{readln} and \var{writeln} are only allowed for text files.
type_e_no_read_write_for_untyped_file=04020_E_Can't use read or write on untyped file.
type_e_no_read_write_for_untyped_file=04020_E_לא ניתן לקרוא או לכתוב טיפוס לא מוגר של קבצים
% \var{read} and \var{write} are only allowed for text or typed files.
type_e_typeconflict_in_set=04021_E_Type conflict between set elements
type_e_typeconflict_in_set=04021_E_התנגשות של טיפוס נתונים בתוך איברים של קבוצה
% There is at least one set element which is of the wrong type, i.e. not of
% the set type.
type_w_maybe_wrong_hi_lo=04022_W_lo/hi(dword/qword) returns the upper/lower word/dword
type_w_maybe_wrong_hi_lo=04022_W_lo/hi(dword/qword) מחזיר את הערך העליון/תחתון של word/dword
% \fpc supports an overloaded version of \var{lo/hi} for \var{longint/dword/int64/qword}
% which returns the lower/upper word/dword of the argument. TP always uses
% a 16 bit \var{lo/hi} which returns always bits 0..7 for \var{lo} and the
% bits 8..15 for \var{hi}. If you want the TP behavior you have
% to type cast the argument to \var{word/integer}
type_e_integer_or_real_expr_expected=04023_E_Integer or real expression expected
type_e_integer_or_real_expr_expected=04023_E_מצפה לביטוי של מספר שלם או מספר ממשי
% The first argument to \var{str} must a real or integer type.
type_e_wrong_type_in_array_constructor=04024_E_Wrong type "$1" in array constructor
type_e_wrong_type_in_array_constructor=04024_E_שימוש שגוי בטיפוס "$1" בתוך יוצר המערך
% You are trying to use a type in an array constructor which is not
% allowed.
type_e_wrong_parameter_type=04025_E_Incompatible type for arg no. $1: Got "$2", expected "$3"
type_e_wrong_parameter_type=04025_E_טיפוס לא מתאים לארגומנט מספר $1: התקבל "$2", מצפה ל"$3"
% You are trying to pass an invalid type for the specified parameter.
type_e_no_method_and_procedure_not_compatible=04026_E_Method (variable) and Procedure (variable) are not compatible
type_e_no_method_and_procedure_not_compatible=04026_E_המשתנה של המתודה והשגרה אינם תואמים
% You can't assign a method to a procedure variable or a procedure to a
% method pointer.
type_e_wrong_math_argument=04027_E_Illegal constant passed to internal math function
type_e_wrong_math_argument=04027_E_ביטוי קבוע לא חוקי הוזן לפונקציה מתמטית פנימית
% The constant argument passed to a ln or sqrt function is out of
% the definition range of these functions.
type_e_no_addr_of_constant=04028_E_Can't get the address of constants
type_e_no_addr_of_constant=04028_E_לא ניתן לקבל את הכתובת של הקבוע
% It is not possible to get the address of a constant, because they
% aren't stored in memory, you can try making it a typed constant.
type_e_argument_cant_be_assigned=04029_E_Argument can't be assigned to
type_e_argument_cant_be_assigned=04029_E_לא ניתן להשים את הארגומנט
% Only expressions which can be on the left side of an
% assignment can be passed as call by reference argument
% Remark: Properties can be only
% used on the left side of an assignment, but they cannot be used as arguments
type_e_cannot_local_proc_to_procvar=04030_E_Can't assign local procedure/function to procedure variable
type_e_cannot_local_proc_to_procvar=04030_E_לא ניתן לשייך פונקציה/שיגרה מקומית למשתנה מסוג שיגרה
% It's not allowed to assign a local procedure/function to a
% procedure variable, because the calling of local procedure/function is
% different. You can only assign local procedure/function to a void pointer.
type_e_no_assign_to_addr=04031_E_Can't assign values to an address
type_e_no_assign_to_addr=04031_E_לא ניתן לשייך ערך לכתובת
% It is not allowed to assign a value to an address of a variable,constant,
% procedure or function. You can try compiling with -So if the identifier
% is a procedure variable.
type_e_no_assign_to_const=04032_E_Can't assign values to const variable
type_e_no_assign_to_const=04032_E_לא ניתן לשייך ערך למשתנה קבוע
% It's not allowed to assign a value to a variable which is declared
% as a const. This is normally a parameter declared as const, to allow
% changing the value make the parameter as a value parameter or a var.
type_e_array_required=04033_E_Array type required
type_e_array_required=04033_E_נדרש משתנה מסוג מערך
% If you are accessing a variable using an index '[<x>]' then
% the type must be an array. In FPC mode also a pointer is allowed.
type_e_interface_type_expected=04034_E_interface type expected, but got "$1"
type_e_interface_type_expected=04034_E_מצפה לטיפוס מסוג ממשק, אבל התקבל "$1"
% The compiler expected to encounter an interface type name, but got something else.
% The following code would provoke this error:
% \begin{verbatim}