diff --git a/compiler/msg/errorn.msg b/compiler/msg/errorn.msg index 3e4c2d06c9..57136e56df 100644 --- a/compiler/msg/errorn.msg +++ b/compiler/msg/errorn.msg @@ -1,3 +1,5 @@ +%%% Reordering of msg/errorn.msg respective to msg/errore.msg +%%% Contains all comments from msg/errorn.msg # # $Id: errorn.msg,v 1.6 2004/01/22 21:19:36 florian Exp $ # This file is part of the Free Pascal Compiler @@ -87,7 +89,7 @@ general_i_targetos=01002_I_Doelsysteem: $1 general_t_exepath=01003_T_Programmalocatie: $1 % When the \var{-vt} switch is used, this line tells you where the compiler % looks for it's binaries. -general_t_unitpath=01004_U_Locatie units: $1 +general_t_unitpath=01004_T_Locatie units: $1 % When the \var{-vt} switch is used, this line tells you where the compiler % looks for compiled units. You can set this path with the \var{-Fu} general_t_includepath=01005_T_Locatie includes: $1 @@ -142,6 +144,31 @@ general_e_errorwritingresourcefile=01011_E_Schrijven van resource string tabel b % reserved words, strings, etc. It also takes care of directives and % conditional compiling handling. % \begin{description} +general_i_fatal=01012_I_Fatale fout: +% Prefix for Fatal Errors +general_i_error=01013_I_Fout: +% Prefix for Errors +general_i_warning=01014_I_Waarschuwing: +% Prefix for Warnings +general_i_note=01015_I_Noot: +% Prefix for Notes +general_i_hint=01016_I_Tip: +% Prefix for Hints +general_e_path_does_not_exist=01017_E_Pad "$1" bestaat niet +% The specified path does not exist. +general_f_compilation_aborted=01018_F_Compilatie afgebroken +% \end{description} +# +# Scanner +# +# 02063 is the last used one +# +% \section{Scanner messages.} +% This section lists the messages that the scanner emits. The scanner takes +% care of the lexical structure of the pascal file, i.e. it tries to find +% reserved words, strings, etc. It also takes care of directives and +% conditional compiling handling. +% \begin{description} scan_f_end_of_file=02000_F_Onverwacht einde van bestand % this typically happens in one of the following cases : % \begin{itemize} @@ -154,25 +181,19 @@ scan_f_end_of_file=02000_F_Onverwacht einde van bestand scan_f_string_exceeds_line=02001_F_String langer dan regel % You forgot probably to include the closing ' in a string, so it occupies % multiple lines. -scan_f_illegal_char=02002_F_ongeldig teken +scan_f_illegal_char=02002_F_ongeldig teken "$1" ($2) % An illegal character was encountered in the input file. scan_f_syn_expected=02003_F_Taalfout: $2 verwacht in kolom $1 % This indicates that the compiler expected a different token than % the one you typed. It can occur almost everywhere where you make a % mistake against the pascal language. -scan_t_start_include_file=02004_T_Ingevoegd bestand $1 word geopend +scan_t_start_include_file=02004_TL_Ingevoegd bestand $1 word geopend % When you provide the \var{-vt} switch, the compiler tells you % when it starts reading an included file. scan_w_comment_level=02005_W_Commentaar van niveau $1 gevonden % When the \var{-vw} switch is used, then the compiler warns you if % it finds nested comments. Nested comments are not allowed in Turbo Pascal % and can be a possible source of errors. -scan_n_far_directive_ignored=02006_N_$F directive (FAR) genegeerd -% The \var{FAR} directive is a 16-bit construction which is recorgnised -% but ignored by the compiler, since it produces 32 bit code. -scan_n_stack_check_global_under_linux=02007_N_Stapeloverloopcontrole is globaal onder linux -% Stack checking with the \var{-Cs} switch is ignored under \linux, since -% \linux does this for you. Only displayed when \var{-vn} is used. scan_n_ignored_switch=02008_N_Genegeerde compileroptie $1 % With \var{-vn} on, the compiler warns if it ignores a switch scan_w_illegal_switch=02009_W_Foutieve compileroptie $1 @@ -184,21 +205,21 @@ scan_e_illegal_char_const=02011_E_Foutieve constante voor een karakter % This happens when you specify a character with its ASCII code, as in % \var{\#96}, but the number is either illegal, or out of range. The range % is 1-255. -scan_f_cannot_open_input=02012_F_Kan bestand niet openen +scan_f_cannot_open_input=02012_F_Kan bestand "$1" niet openen % \fpc cannot find the program or unit source file you specified on the % command line. scan_f_cannot_open_includefile=02013_F_Kan ingevoerd bestand niet openen $1 % \fpc cannot find the source file you specified in a \var{\{\$include ..\}} % statement. -scan_e_too_much_endifs=02014_E_Te veel $ENDIFs of $ELSEs -% Your \var{\{\$IFDEF ..\}} and {\{\$ENDIF\}} statements aren't balanced. -scan_w_only_pack_records=02015_W_Record velden kunnen op 1,2 of 4 bytes uitgelijnd worden. -% You are specifying the \var{\{\$PACKRECORDS n\} } with an illegal value for -% \var{n}. Only 1,2,4 or 16 are valid in this case. -scan_w_only_pack_enum=02016_W_Enumeraties kunnen alleen worden bewaard in 1,2 of 4 bytes +scan_e_illegal_pack_records=02015_E_Ongeldige alignatie-aanduiding voor records: "$1" +% You are specifying the \var{\{\$PACKRECORDS n\} } or \var{\{\$ALIGN n\} } +% with an illegal value for \var{n}. For \$PACKRECORDS valid alignments are 1, 2, 4, 8, 16, 32, C, +% NORMAL, DEFAULT, and for \$ALIGN valid alignment are 1, 2, 4, 8, 16, 32, ON, +% OFF. Under mode MacPas \$ALIGN also supports MAC68K, POWER and RESET. +scan_e_illegal_pack_enum=02016_E_Ongeldige enumeratie grootte aanduiding "$1" % You are specifying the \var{\{\$PACKENUM n\}} with an illegal value for -% \var{n}. Only 1,2 or 4 are valid in this case. -scan_e_endif_expected=02017_E_$ENDIF verwacht voor $1 op $2 $3 +% \var{n}. Only 1,2,4, NORMAL or DEFAULT are valid here. +scan_e_endif_expected=02017_E_$ENDIF verwacht voor $1 op $2 $3 lijn $4 % Your conditional compilation statements are unbalanced. scan_e_preproc_syntax_error=02018_E_Taalfout bij het compileren van een conditionele compilatie uitdrukking % There is an error in the expression following the \var{\{\$if ..\}} compiler @@ -228,34 +249,34 @@ scan_e_keyword_cant_be_a_macro=02028_E_Sleutelwoord herdefinieren als macro heef % You cannot redefine keywords with macros. scan_f_macro_buffer_overflow=02029_F_Macro buffer overflow bij lezen of expansie van macro % Your macro or it's result was too long for the compiler. -scan_w_macro_deep_ten=02030_W_Expansie van macro meer dan 16 niveaus diep, waarschijnlijk een recursieve macro -% When expanding a macro macros have been nested to a level of 16. +scan_w_macro_too_deep=02030_W_Uitwerken van macros heeft niveau 16 overschreden +% When expanding a macro, macros have been nested to a level of 16. % The compiler will expand no further, since this may be a sign that % recursion is used. -scan_e_wrong_styled_switch=02031_E_Compileroptie is niet toegestaan in (* ... *) commentaar -% Compiler switches should always be between \var{\{ \}} comment delimiters. -scan_d_handling_switch=02032_D_Behandel schakelaar "$1" +scan_w_wrong_styled_switch=02031_W_Compiler opties in delphi commentaar stijl zijn niet ondersteund +% Compiler switches should be in normal pascal style comments. +scan_d_handling_switch=02032_DL_Behandel schakelaar "$1" % When you set debugging info on (\var{-vd}) the compiler tells you when it % is evaluating conditional compile statements. -scan_c_endif_found=02033_C_ENDIF $1 gevonden +scan_c_endif_found=02033_CL_ENDIF $1 gevonden % When you turn on conditional messages(\var{-vc}), the compiler tells you % where it encounters conditional statements. -scan_c_ifdef_found=02034_C_IFDEF $1 gevonden, $2 +scan_c_ifdef_found=02034_CL_IFDEF $1 gevonden, $2 % When you turn on conditional messages(\var{-vc}), the compiler tells you % where it encounters conditional statements. -scan_c_ifopt_found=02035_C_IFOPT $1 gevonden, $2 +scan_c_ifopt_found=02035_CL_IFOPT $1 gevonden, $2 % When you turn on conditional messages(\var{-vc}), the compiler tells you % where it encounters conditional statements. -scan_c_if_found=02036_C_IF $1 gevonden, $2 +scan_c_if_found=02036_CL_IF $1 gevonden, $2 % When you turn on conditional messages(\var{-vc}), the compiler tells you % where it encounters conditional statements. -scan_c_ifndef_found=02037_C_IFNDEF $1 gevonden, $2 +scan_c_ifndef_found=02037_CL_IFNDEF $1 gevonden, $2 % When you turn on conditional messages(\var{-vc}), the compiler tells you % where it encounters conditional statements. -scan_c_else_found=02038_C_ELSE $1 gevonden, $2 +scan_c_else_found=02038_CL_ELSE $1 gevonden, $2 % When you turn on conditional messages(\var{-vc}), the compiler tells you % where it encounters conditional statements. -scan_c_skipping_until=02039_C_Negeer tot... +scan_c_skipping_until=02039_CL_Negeer tot... % When you turn on conditional messages(\var{-vc}), the compiler tells you % where it encounters conditional statements, and whether it is skipping or % compiling parts. @@ -270,20 +291,20 @@ scan_w_unsupported_switch=02041_W_Niet ondersteunde optie $1 scan_w_illegal_directive=02042_W_Ongeldige compiler optie $1 % When warings are turned on (\var{-vw}) the compiler warns you about % unrecognised switches. For a list of recognised switches, \progref -scan_t_back_in=02043_T_Terug in $1 +scan_t_back_in=02043_TL_Terug in $1 % When you use (\var{-vt}) the compiler tells you when it has finished % reading an include file. -%%% scan_w_unsupported_app_type=W_Applicatie type niet ondersteund: $1 -%%% % You get this warning, ff you specify an unknown application type -%%% % with the directive \var{\{\$APPTYPE\}} +% +% +% scan_w_unsupported_app_type=02044_W_Niet ondersteund programmatype: $1 % It is not possible to switch from one assembler reader to another % inside an assmebler block. The new reader will be used for next % assembler statement only. scan_w_app_type_not_support=02045_W_$APPTYPE niet ondersteund op doelsysteem % The \var{\{\$APPTYPE\}} directive is supported by win32 applications only. -scan_w_decription_not_support=02046_W_DESCRIPTION is slechts toegestaan onder OS2 en Win32 -% The \var{\{\$DESCRIPTION\}} directive is only supported for OS2 and Win32 targets. +scan_w_description_not_support=02046_W_DESCRIPTIION is niet ondersteund op het geselecteerde OS +% The \var{\{\$DESCRIPTION\}} directive is not supported on this target OS scan_n_version_not_support=02047_N_VERSION is niet ondersteund door het doel OS. % The \var{\{\$VERSION\}} directive is only supported by win32 target. scan_n_only_exe_version=02048_N_VERSION kan alleen voor executables of bibliotheken @@ -291,7 +312,7 @@ scan_n_only_exe_version=02048_N_VERSION kan alleen voor executables of bibliothe scan_w_wrong_version_ignored=02049_W_verkeerd formaat voor VERSION directive $1 % The \var{\{\$VERSION\}} directive format is major_version.minor_version % where major_version and minor_version are words. -scan_w_unsupported_asmmode_specifier=02050_W_Niet ondersteunde assembler soort gegeven $1 +scan_e_illegal_asmmode_specifier=02050_E_Ongeldige assembler-stijl opgegeven: "$1" % When you specify an assembler mode with the \var{\{\$ASMMODE xxx\}} % the compiler didn't recognize the mode you specified. scan_w_no_asm_reader_switch_inside_asm=02051_W_ASM lezer-optie is niet mogelijk in een asm instructie, $1 ingesteld voor volgende blok @@ -327,7 +348,7 @@ scan_e_invalid_maxfpureg_value=02055_E_Ongeldige waarde voor FPU register limiet % semantics of you language, i.e. it determines if your pascal constructs % are correct. % \begin{description} -scan_w_only_one_resourcefile_supported=02056_W_Only one resource file is supported for this target +scan_w_only_one_resourcefile_supported=02056_W_Slechts 1 resource bestand ondersteund voor dit operating systeem. % The target you are compiling for supports only one resource file. This is the % case of OS/2 (EMX) currently. The first resource file found is used, the % others are discarded. @@ -340,18 +361,59 @@ scan_w_only_one_resourcefile_supported=02056_W_Only one resource file is support % semantics of you language, i.e. it determines if your pascal constructs % are correct. % \begin{description} +scan_w_macro_support_turned_off=02057_W_Macro ondersteuning is uitgeschakeld +% A macro declaration has been found, but macro support is currently off, +% so the declaration will be ignored. To turn macro support on compile with +% -Sm on the commandline or add \{\$MACRO ON\} in the source +scan_e_invalid_interface_type=02058_E_Ongeldig interface type opgegeven. Geldige waarden zijn COM, CORBA of DEFAULT +% The interface type that was specified is not supported +scan_w_appid_not_support=02059_W_APPID is slechts ondersteund op PalmOS +% The \var{\{\$APPID\}} directive is only supported for the PalmOS target. +scan_w_appname_not_support=02060_W_APPNAME is slechts ondersteund op PalmOS +% The \var{\{\$APPNAME\}} directive is only supported for the PalmOS target. +scan_e_string_exceeds_255_chars=02061_E_Constante tekenreeksen (strings) kunnen niet langer dan 255 karakters zijn. +% A single string constant can contain at most 255 chars. Try splitting up the +% string in multiple smaller parts and concatenate them with a + operator. +scan_f_include_deep_ten=02062_F_Include bestanden kunnen maar tot op 16 niveaus genest worden +% When including include files the files have been nested to a level of 16. +% The compiler will expand no further, since this may be a sign that +% recursion is used. +scan_e_too_many_push=02063_F_Te veel PUSH niveaus +% A maximum of 20 levels is allowed. This error occur only in mode MacPas. +scan_e_too_many_pop=02064_E_POP instructie zonder voorafgaande PUSH instructie +% This error occur only in mode MacPas. +scan_e_error_macro_lacks_value=02065_E_Macro of compilatie-variabele "$1" heeft geen waarde +% Thus the conditional compile time expression cannot be evaluated. +scan_e_wrong_switch_toggle_default=02066_E_Verkeerde schakel-waarde. Gebruik ON/OFF/DEFAULT of +/-/* +% You need to use ON or OFF or DEFAULT or a + or - or * to toggle the switch +scan_e_mode_switch_not_allowed=02067_E_MODE schakel "$1" is niet toegestaan op deze plaats. +% A mode switch has already been encountered, or, in case of option -Mmacpas, +% a mode switch occur after UNIT. +scan_e_error_macro_undefined=02068_E_Macro of compilatie-variabele "$1" is niet gedefinieerd +% Thus the conditional compile time expression cannot be evaluated. Only in mode MacPas. +scan_e_utf8_bigger_than_65535=02069_E_UTF-8 code groter dan 65535 gevonden +% \fpc handles utf-8 strings internally as widestrings e.g. the char codes are limited to 65535 +scan_e_utf8_malformed=02070_E_Ongeldige UTF-8 tekenreeks +% The given string isn't a valid UTF-8 string +scan_c_switching_to_utf8=02071_C_UTF-8 handtekening gevonden, gebruik UTF-8 codering +% The compiler found an UTF-8 encoding signature (\$ef, \$bb, \$bf) at the beginning of a file, +% so it interprets it as an UTF-8 file +scan_e_compile_time_typeerror=02072_E_Compilatie-expressie: "$1" gevraagd, maar kreeg "$2" op "$3" +% Type check of a compile time expression failed. +% \end{description} +# +# Parser +# +# 03192 is the last used one +# +% \section{Parser messages} +% This section lists all parser messages. The parser takes care of the +% semantics of you language, i.e. it determines if your pascal constructs +% are correct. +% \begin{description} parser_e_syntax_error=03000_E_Parser - Taalfout % An error against the Turbo Pascal language was encountered. This happens % typically when an illegal character is found in the sources file. -parser_w_proc_far_ignored=03001_W_Procedure type FAR genegeerd -% This is a warning. \var{FAR} is a construct for 8 or 16 bit programs. Since -% the compile generates 32 bit programs, it ignores this directive. -parser_w_proc_near_ignored=03002_W_Procedure type NEAR genegeerd -% This is a warning. \var{NEAR} is a construct for 8 or 16 bit programs. Since -% the compile generates 32 bit programs, it ignores this directive. -parser_w_proc_interrupt_ignored=03003_W_Procedure type INTERRUPT genegeerd -% This is a warning. \var{INTERRUPT} is a i386 specific construct -% and is igonred for other processors. parser_e_dont_nest_interrupt=03004_E_INTERRUPT procedures kunnen niet genest worden % An \VAR{INTERRUPT} procedure must be global. parser_w_proc_directive_ignored=03005_W_Procedure type $1 ignored @@ -360,8 +422,6 @@ parser_w_proc_directive_ignored=03005_W_Procedure type $1 ignored parser_e_no_overload_for_all_procs=03006_E_Not all declarations of $1 are declared with OVERLOAD % When you want to use overloading using the \var{OVERLOAD} directive, then % all declarations need to have \var{OVERLOAD} specified. -parser_e_no_dll_file_specified=03007_E_Geen DLL bestand opgegeven -% No longer in use. parser_e_export_name_double=03008_E_Dubbel geexporteerde functienaam $1 % Exported function names inside a specific DLL must all be different parser_e_export_ordinal_double=03009_E_Dubbel geexporteerde functie index $1 @@ -378,19 +438,13 @@ parser_e_constructorname_must_be_init=03013_E_Constructornaam moet INIT zijn parser_e_destructorname_must_be_done=03014_E_Destructornaam moet DONE zijn % You are declaring a constructor with a name which isn't \var{done}, and the % \var{-Ss} switch is in effect. See the \var{-Ss} switch (\seeo{Ss}). -parser_e_illegal_open_parameter=03015_E_Foutieve open parameter -% You are trying to use the wrong type for an open parameter. parser_e_proc_inline_not_supported=03016_E_Procedure type INLINE wordt niet ondersteund % You tried to compile a program with C++ style inlining, and forgot to % specify the \var{-Si} option (\seeo{Si}). The compiler doesn't support C++ % styled inlining by default. -parser_w_priv_meth_not_virtual=03017_W_Private methoden zijn niet VIRTUAL -% You declared a method in the private part of a object (class) as -% \var{virtual}. This is not allowed. Private methods cannot be overridden -% anyway. -parser_w_constructor_should_be_public=03018_E_Constructor mag niet private or protected zijn +parser_w_constructor_should_be_public=03018_W_Constructor mag niet private or protected zijn % Constructors must be in the 'public' part of an object (class) declaration. -parser_w_destructor_should_be_public=03019_E_Destructor mag niet private or protected zijn +parser_w_destructor_should_be_public=03019_W_Destructor mag niet private or protected zijn % Destructors must be in the 'public' part of an object (class) declaration. parser_n_only_one_destructor=03020_N_Klasse heeft slechts 1 destructor % You can declare only one destructor for a class. @@ -407,17 +461,16 @@ parser_f_no_anonym_objects=03022_F_Anonieme klassedefinities zijn niet toegestaa % end; % \end{verbatim} % will trigger this error. -parser_object_has_no_vmt=03023_E_Het object $1 heeft geen VMT +parser_n_object_has_no_vmt=03023_N_Het object "$1Ã" heeft geen VMT +% This is a note indicating that the declared object has no +% virtual method table. parser_e_illegal_parameter_list=03024_E_Foutieve parameterlijst % You are calling a function with parameters that are of a different type than % the declared parameters of the function. -parser_e_wrong_parameter_type=03025_E_Foutief parametertype meegegeven voor arg #$1 -% There is an error in the parameter list of the function or procedure. -% The compiler cannot determine the error more accurate than this. parser_e_wrong_parameter_size=03026_E_Onjuist aantal parameters meegegeven % There is an error in the parameter list of the function or procedure, % the number of parameters is not correct. -parser_e_overloaded_no_procedure=03027_E_Overroepen symbool is geen procedure of functie +parser_e_overloaded_no_procedure=03027_E_Overladen symbool "$1" is geen procedure of functie % The compiler encountered a symbol with the same name as an overloaded % function, but it isn't a function it can overload. parser_e_overloaded_have_same_parameters=03028_E_Overroepen procedures hebben identieke parameterlijst @@ -439,10 +492,6 @@ parser_n_duplicate_enum=03031_N_Waarden in opsommingstypes moeten steeds stijgen % \end{verbatim} % The second declaration would produce an error. \var{A\_UAS} needs to have a % value higher than \var{A\_E}, i.e. at least 7. -parser_n_interface_name_diff_implementation_name=03032_N_Interface- en implementatienamen zijn verschillend -% This note warns you if the implementation and interface names of a -% functions are different, but they have the same mangled name. This -% is important when using overloaded functions (but should produce no error). parser_e_no_with_for_variable_in_other_segments=03033_E_With kan niet gebruikt worden voor variabelen in verschillende segmenten % With stores a variable locally on the stack, % but this is not possible if the variable belongs to another segment. @@ -494,8 +543,8 @@ parser_e_header_dont_match_any_member=03048_E_Proceduredeclaratie komt niet over % This happens when the compiler scans a procedure declaration that contains % a dot, i.e., a object or class method, but the procedure name is not a % procedure of this type. -parser_p_procedure_start=03049_P_Procedure/functie $1 ($2) op regel $3 -% When using the \var{-vp} switch, the compiler tells you when it starts +parser_d_procedure_start=03049_DL_procedure/functie $1 +% When using the \var{-vd} switch, the compiler tells you when it starts % processing a procedure or function implementation. parser_e_error_in_real=03050_E_Foutieve vlottende-komma constante % The compiler expects a floating point expression, and gets something else. @@ -534,7 +583,7 @@ parser_e_case_mismatch=03055_E_Type van constante komt niet overeen met dat van parser_e_illegal_symbol_exported=03056_E_Het symbool kan niet uitgevoerd worden uit een bibliotheek % You can only export procedures and functions when you write a library. You % cannot export variables or constants. -parser_w_should_use_override=03057_E_Een virtuele methode moet met OVERRIDE overroepen worden: $1 +parser_w_should_use_override=03057_W_Een virtuele methode moet met OVERRIDE overroepen worden: $1 % A method that is declared \var{virtual} in a parent class, should be % overridden in the descendent class with the \var{override} directive. If you % don't specify the \var{override} directive, you will hide the parent method; @@ -564,14 +613,8 @@ parser_e_cant_access_private_member=03063_E_Kan niet in prive-veld van een objec % Fields that are declared in a \var{private} section of an object or class % declaration cannot be accessed outside the module where the class is % defined. -parser_w_overloaded_are_not_both_virtual=03064_W_Alle overroepen methoden moeten virtueel zijn als 1 virtueel is: $1 -% If you declare overloaded methods in a class, then they should either all be -% virtual, or none. You shouldn't mix them. -parser_w_overloaded_are_not_both_non_virtual=03065_W_Overroepen methode van een niet virtuele methode moet niet-virtueel zijn: $1 -% If you declare overloaded methods in a class, then they should either all be -% virtual, or none. You shouldn't mix them. -parser_e_overloaded_methodes_not_same_ret=03066_E_Virtuele overroepen methodes moeten dezelfde resultaat-type hebben: $1 -% If you declare virtual overloaded methods in a class definition, they must +parser_e_overridden_methods_not_same_ret=03066_E_Overridden methodes moeten dezelfde resultaat type hebben: "$2" wordt overridden door Ã"1$1" met een ander type +% If you declare overridden methods in a class definition, they must % have the same return type. parser_e_dont_nest_export=03067_E_Als EXPORT gedeclareerde procedures kunnen niet genest worden % You cannot declare a function or procedure within a function or procedure @@ -579,7 +622,7 @@ parser_e_dont_nest_export=03067_E_Als EXPORT gedeclareerde procedures kunnen nie parser_e_methods_dont_be_export=03068_E_Methoden kunnen niet geexporteerd worden. % You cannot declare a procedure that is a method for an object as % \var{export}ed. That is, your methods cannot be called from a C program. -parser_e_call_by_ref_without_typeconv=03069_E_Typen van referentieparameters moeten exact overeenkomen. +parser_e_call_by_ref_without_typeconv=03069_E_Typen van referentieparameters moeten exact overeenkomen. "$1" gekregen, "$2" verwacht. % When calling a function declared with \var{var} parameters, the variables in % the function call must be of exactly the same type. There is no automatic % type conversion. @@ -640,9 +683,6 @@ parser_e_no_new_or_dispose_for_classes=03086_E_De uitgebreide syntax van NEW of % \var{new}. The constructor must be used for that. For the same reason, you % cannot call \var{Dispose} to de-allocate an instance of a class, the % destructor must be used for that. -parser_e_asm_incomp_with_function_return=03087_E_Assembler stemt niet overeen met type van functieresultaat -% You're trying to implement a \var{assembler} function, but the return type -% of the function doesn't allow that. parser_e_procedure_overloading_is_off=03088_E_Procedure overroepen is afgezet % When using the \var{-So} switch, procedure overloading is switched off. % Turbo Pascal does not support function overloading. @@ -701,31 +741,29 @@ parser_e_abstract_no_definition=03098_E_Abtracte methoden kunnen niet gedefineer parser_e_overloaded_must_be_all_global=03099_E_Deze overroepen procedure kan niet lokaal zijn (moet geexporteerd worden) % You are defining a overloaded function in the implementation part of a unit, % but there is no corresponding declaration in the interface part of the unit. -parser_w_virtual_without_constructor=03100_W_Gebruik van virtuele methoden zonder constructor +parser_w_virtual_without_constructor=03100_W_Gebruik van virtuele methoden zonder constructor in "$1" % If you declare objects or classes that contain virtual methods, you need % to have a constructor and destructor to initialize them. The compiler % encountered an object or class with virtual methods that doesn't have % a constructor/destructor pair. -parser_m_macro_defined=03101_M_Macro gedefinieerd: $1 -% When \var{-vm} is used, the compiler tells you when it defines macros. -parser_m_macro_undefined=03102_M_Macro opgeheven: $1 -% When \var{-vm} is used, the compiler tells you when it undefines macros. -parser_m_macro_set_to=03103_M_Macro $1 wordt $2 -% When \var{-vm} is used, the compiler tells you what values macros get. +parser_c_macro_defined=03101_CL_Macro gedefinieerd: $1 +% When \var{-vc} is used, the compiler tells you when it defines macros. +parser_c_macro_undefined=03102_CL_Macro definitie verwijderd: $1 +% When \var{-vc} is used, the compiler tells you when it undefines macros. +parser_c_macro_set_to=03103_CL_Macro $1 heeft waarde $2 gekregen +% When \var{-vc} is used, the compiler tells you what values macros get. parser_i_compiling=03104_I_Compilatie van $1 % When you turn on information messages (\var{-vi}), the compiler tells you % what units it is recompiling. -parser_u_parsing_interface=03105_U_Parsen van de interface van unit $1 +parser_u_parsing_interface=03105_UL_Parsen van de interface van unit $1 % This tells you that the reading of the interface % of the current unit starts -parser_u_parsing_implementation=03106_U_Parsen van de implementatie van unit $1 +parser_u_parsing_implementation=03106_UL_Parsen van de implementatie van unit $1 % This tells you that the code reading of the implementation % of the current unit, library or program starts -parser_d_compiling_second_time=03107_D_Compilatie van $1 voor de tweede keer. +parser_d_compiling_second_time=03107_DL_Compilatie van $1 voor de tweede keer. % When you request debug messages (\var{-vd}) the compiler tells you what % units it recompiles for the second time. -parser_e_no_paras_allowed=03108_E_Array eigenschappen zijn hier niet toegestaan. -% You cannot use array properties at that point.a parser_e_no_property_found_to_override=03109_E_Geen eigenschap gevonden om te herdefinieren % You want to overrride a property of a parent class, when there is, in fact, % no such property in the parent class. @@ -772,8 +810,6 @@ parser_e_function_already_declared_public_forward=03120_E_Functie is al publiek/ % declaration in the \var{implmentation} section. parser_e_not_external_and_export=03121_E_Kan niet zowel EXPORT als EXTERNAL gebruiken % These two procedure directives are mutually exclusive -parser_e_name_keyword_expected=03122_E_NAME sleutelwoord verwacht -% The definition of an external variable needs a \var{name} clause. parser_w_not_supported_for_inline=03123_W_$1 wordt niet ondersteund voor inline procedure/functie % Inline procedures don't support this declaration. parser_w_inlining_disabled=03124_W_Inlining uitgeschakeld @@ -795,10 +831,6 @@ parser_e_call_convention_dont_match_forward=03129_E_Aanroep conventie klopt niet % e.g. \var{cdecl;} but omit this directive in the implementation, or vice % versa. The calling convention is part of the function declaration, and % must be repeated in the function definition. -parser_e_register_calling_not_supported=03130_E_Registeraanroep (fastcall) wordt niet ondersteund -% The \var{register} calling convention, i.e., arguments are passed in -% registers instead of on the stack is not supported. Arguments are always -% passed on the stack. parser_e_property_cant_have_a_default_value=03131_E_Eigenschap kan geen standaard waarde hebben % Set properties or indexed properties cannot have a default value. parser_e_property_default_value_must_const=03132_E_De standaard waarde van een eigenschap moet een constante zijn @@ -812,13 +844,8 @@ parser_e_cant_publish_that_property=03134_E_Dit soort eigenschappen kunnen niet % Properties in a \var{published} section cannot be array properties. % they must be moved to public sections. Properties in a \var{published} % section must be an ordinal type, a real type, strings or sets. -parser_w_empty_import_name=03135_W_Lege importnaam opgegeven. -% Both index and name for the import are 0 or empty -parser_e_empty_import_name=03136_W_Lege importnaam opgegeven +parser_e_empty_import_name=03136_E_Lege importnaam opgegeven % Some targets need a name for the imported procedure or a cdecl specifier -parser_e_used_proc_name_changed=03137_E_Interne functienaam gewijzigd na declaratie. -% This is an internal error; please report any occurrences of this error -% to the \fpc team. parser_e_division_by_zero=03138_E_Deling door nul % There is a divsion by zero encounted parser_e_invalid_float_operation=03139_E_Ongeldige vlottende-komma bewerking. @@ -839,7 +866,7 @@ parser_e_ill_msg_param=03144_E_Message handlers aanvaarden slechts 1 variabele p % A method declared with the \var{message}-directive as message handler % can take only one parameter which must be declared as call by reference % Parameters are declared as call by reference using the \var{var}-directive -parser_e_duplicate_message_label=03145_E_Dubbel message label: %1 +parser_e_duplicate_message_label=03145_E_Dubbel message label: $1 % A label for a message is used twice in one object/class parser_e_self_in_non_message_handler=03146_E_Self kan alleen een explicite parameter zijn bij string message handlers % The self parameter can be passed only explicit if it is a method which @@ -915,6 +942,186 @@ parser_e_dlltool_unit_var_problem2=03161_E_Compileer zonder -WD optie % This section lists all errors that can occur when type checking is % performed. % \begin{description} +parser_f_need_objfpc_or_delphi_mode=03162_F_U moet OBJFPC (-S2) of DELPHI (-Sd) mode gebruiken om deze code te compileren +% You need to use \{\$mode objfpc\} or \{\$mode delphi\} to compile this file. +% Or use the equivalent commandline switches -S2 or -Sd. +parser_e_no_export_with_index_for_target=03163_E_Kan niet exporteren met indexen kleiner dan $1 +% Exporting of functions or procedures with a specified index is not +% supported on this target. +parser_e_no_export_of_variables_for_target=03164_E_Exporteren van variabelen is niet ondersteund op $1 +% Exporting of variables is not supported on this target. +parser_e_improper_guid_syntax=03165_E_Ongeldige GUID aanduiding +parser_w_interface_mapping_notfound=03168_W_PGeen procedure genaamd "$1Ã" om "$2.$3" te implementeren gevonden +parser_e_interface_id_expected=03169_E_Interface aanduiding verwacht +% This happens when the compiler scans a \var{class} declaration that contains +% \var{interface} function name mapping code like this: +% \begin{verbatim} +% type +% TMyObject = class(TObject, IDispatch) +% function IUnknown.QueryInterface=MyQueryInterface; +% .... +% \end{verbatim} +% and the \var{interface} before the dot not listed in the inheritance list. +parser_e_type_cant_be_used_in_array_index=03170_E_Type "$1" kan niet als array index type gebruikt worden +% Types like \var{qword} or \var{int64} aren't allowed as array index type +parser_e_no_con_des_in_interfaces=03171_E_Constructors and destructors zijn niet toegestaan in interfaces +% Constructor and destructor declarations aren't allowed in interface +% In the most cases the method \var{QueryInterface} of \var{IUnknown} can +% be used to create a new interface. +parser_e_no_access_specifier_in_interfaces=03172_E_Toegangsmethoden kunnen niet gebruikt worden in interfaces +% The access specifiers \var{public}, \var{private}, \var{protected} and +% \var{pusblished} can't be used in interfaces because all methods +% of an interfaces must be public. +parser_e_no_vars_in_interfaces=03173_E_Een interface definitie kan geen velden bevatten +% Declarations of fields aren't allowed in interfaces. An interface +% can contain only methods +parser_e_no_local_proc_external=03174_E_Can lokale procedure niet als EXTERNAL definieren +% Declaring local procedures as external is not possible. Local procedures +% get hidden parameters that will make the chance of errors very high +parser_w_skipped_fields_before=03175_W_Sommige velden voor "$1Ã" zijn niet geinitialiseerd +% In Delphi mode, not all fields of a typed constant record have to be +% initialized, but the compiler warns you when it detects such situations. +parser_e_skipped_fields_before=03176_E_Sommige velden voor "$1" zijn niet geinitialiseerd +% In all syntax modes but Delphi mode, you can't leave some fields uninitialized +% in the middle of a typed constant record +parser_w_skipped_fields_after=03177_W_Sommige velden na "$1" zijn niet geinitialiseerd +% You can leave some fields at the end of a type constant record uninitialized +% (the compiler will initialize them to zero automatically). This may be the cause +% of subtle problems. +parser_e_varargs_need_cdecl_and_external=03178_E_VARARGS aanduiding zonder CDECL of EXTERNAL +% The varargs directive can only be used with procedures or functions +% that are declared with \var{cdecl} and \var{external} directives. The varargs directive +% is only meant to provide a compatible interface to C functions like printf. +parser_e_self_call_by_value=03179_E_SELF moet een normale waarde parameter zijn +% You can't declare self as a const or var parameter, it must always be +% a call-by-value parameter +parser_e_interface_has_no_guid=03180_E_Interface "$1" heeft geen interface definitie +% When you want to assign an interface to a constant, then the interface +% must have a GUID value set. +parser_e_illegal_field_or_method=03181_E_Ongekend klasse-veld of methode aanduiding "$1Ã" +% Properties must refer to a field or method in the same class. +parser_w_proc_overriding_calling=03182_W_Aanroep-modus "$1Ã" vervangen door "$2" +% There are two directives in the procedure declaration that specify a calling +% convention. Only the last directive will be used +parser_e_no_procvarobj_const=03183_E_Getypeerde constanten van type "procedure of object" kunnen alleen met NIL geinitialiseerd worden +% You can't assign the address of a method to a typed constant which has a +% 'procedure of object' type, because such a constant requires two addresses: +% that of the method (which is known at compile time) and that of the object or +% class instance it operates on (which can not be known at compile time). +parser_e_default_value_only_one_para=03184_E_De default aanduiding kan maar bij 1 parameter horen. +parser_e_default_value_expected_for_para=03185_E_Default parameter vereist voor "$1" +parser_w_unsupported_feature=03186_W_Gebruik van niet-ondersteunde mogelijkheden +% You're trying to force the compiler into doing something it cannot do yet. +parser_h_c_arrays_are_references=03187_H_C arrays worden via referentie doorgegeven +% Any array passed to a C functions is passed +% by a pointer (i.e. by reference). +parser_e_C_array_of_const_must_be_last=03188_E_"C array of const" moet het laatste argument zijn +% You can not add any other argument after an \var{array of const} for +% \var{cdecl} functions, as the size pushed on stack for this argument is +% not known. +parser_h_type_redef=03189_H_Type "$1Ã" herdefinitie +% This is an indicator that a previously declared type is +% being redefined as something else. This may, or may not +% be, a cause for errors. +parser_w_cdecl_has_no_high=03190_W_CDECL functies hebben geen HIGH parameter +% Functions declared with cdecl modifier do not pass an extra implicit parameter. +parser_w_cdecl_no_openstring=03191_W_CDECL functies ondersteunen geen open strings +% Openstring is not supported for cdecl'ared functions. +parser_e_initialized_not_for_threadvar=03192_E_Kan THREADVAR variabelen niet initialiseren +% Variables declared as threadvar can not be initialized with a default value. +% The variables will always be filled with zero at the start of a new thread. +parser_e_msg_only_for_classes=03193_E_de MESSAGE aanduiding is alleen toegestaan in classes +% The message directive is only supported for Class types. +parser_e_procedure_or_function_expected=03194_E_Procedure of functie verwacht +% A class method can only be specified for procedures and functions. +parser_e_illegal_calling_convention=03195_W_Aanroep-specificatie genegeerd: "$1" +% Some calling conventions are supported only by certain CPUs. I.e. most non-i386 ports support +% only the standard ABI calling convention of the CPU. +parser_e_no_object_reintroduce=03196_E_REINTRODUCE kan niet in objecten worden gebruikt +% \var{reintroduce} is not supported for objects. +parser_e_paraloc_only_one_para=03197_E_Elk argument moet zijn eigen locatie hebben +% If locations for arguments are specified explicitly as it is required by +% some syscall conventions, each argument must have it's only location, things +% like \var{procedure p(i,j : longint 'r1');} aren't allowed +parser_e_paraloc_all_paras=03198_E_Elk argument moet een expliciete locatie hebben +% If one argument has an explicit argument location, all arguments of a procedure +% must have one. +parser_e_illegal_explicit_paraloc=03199_E_Ongekende argument locatie +% The location specified for an argument isn't recognized by the compiler +parser_e_32bitint_or_pointer_variable_expected=03200_E_32-bit integer of pointer variabele verwacht +% The libbase for MorphOS/AmigaOS can be give only as \var{longint}, \var{dword} or any pointer variable. +parser_e_goto_outside_proc=03201_E_GOTO opdrachten zijn niet toegestaan tussen verschillende procedures +% It isn't allowed to use the \var{goto} statements referencing labels outside the +% current procedure. The following example shows the problem: +% \begin{verbatim} +% ... +% procedure p1; +% label +% l1; +% +% procedure p2; +% begin +% goto l1; // This goto ISN'T allowed +% end; +% +% begin +% p2 +% l1: +% end; +% ... +% +% \end{verbatim} +parser_f_too_complex_proc=03202_F_Procedure te moeilijk, te veel registers vereist +% Your procedure body is too long for the compiler. You should split the +% procedure into multiple smaller procedures. +parser_e_illegal_expression=03203_E_Ongeldige uitdrukking +% This can occur under many circumstances. Mostly when trying to evaluate +% constant expressions. +parser_e_invalid_integer=03204_E_Ongeldige integer uitdrukking +% You made an expression which isn't an integer, and the compiler expects the +% result to be an integer. +parser_e_invalid_qualifier=03205_E_Ongeldige aanduiding +% One of the following is happening : +% \begin{itemize} +% \item You're trying to access a field of a variable that is not a record. +% \item You're indexing a variable that is not an array. +% \item You're dereferencing a variable that is not a pointer. +% \end{itemize} +parser_e_upper_lower_than_lower=03206_E_Bovengrens kleiner dan ondergrens +% You are declaring a subrange, and the lower limit is higher than the high +% limit of the range. +parser_e_macpas_exit_wrong_param=03207_E_Exit parameter moet de naam zijn van de procedure waarin het gebruikt wordt +% Non local exit is not allowed. This error occur only in mode MacPas. +parser_e_illegal_assignment_to_count_var=03208_E_Ongeldige toekenning aan lus-variabele "$1" +% The type of a \var{for} loop variable must be an ordinal type. +% Loop variables cannot be reals or strings. +parser_e_no_local_var_external=03209_E_Kan een locale variabele niet als EXTERNAL aanduiden +% Declaring local variables as external is not allowed. Only global variables can reference +% to external variables. +parser_e_proc_already_external=03210_E_De procedure is reeds als EXTERNAL aangeduid +% The procedure is already declared with the EXTERNAL directive in an interface or +% forward declaration. +parser_w_implicit_uses_of_variants_unit=03211_W_Impliciet gebruik van de VARIANTS unit +% The Variant type is used in the unit without any used unit using the Variants unit. The +% compiler has implicitly added the Variants unit to the uses list. To remove this warning +% the Variants unit needs to be added to the uses statement. +parser_e_no_static_method_in_interfaces=03212_E_Class en statische methoden kunnen niet gebruikt worden in interfaces +% The specifier \var{class} and directive \var{static} can't be used in interfaces +% because all methods of an interfaces must be public. +parser_e_arithmetic_operation_overflow=03213_E_Overflow in wiskundige berekening +% An operation on two integers values produced an overflow +parser_e_protected_or_private_expected=03214_E_Protected of Private verwacht +% \var{strict} can be only used together with \var{protected} or \var{private}. +% \end{description} +# +# Type Checking +# +# 04049 is the last used one +# +% \section{Type checking errors} +% This section lists all errors that can occur when type checking is +% performed. +% \begin{description} type_e_mismatch=04000_E_Typen stemmen niet overeen % This can happen in many cases: % \begin{itemize} @@ -944,7 +1151,7 @@ type_e_type_id_expected=04003_E_Typesymbool verwacht type_e_variable_id_expected=04004_E_Variabelesymbool verwacht % This happens when you pass a constant to a \var{Inc} var or \var{Dec} % procedure. You can only pass variables as arguments to these functions. -type_e_integer_expr_expected=04005_E_Integerexpressie verwacht +type_e_integer_expr_expected=04005_E_Gehele uitdrukking verwacht, $1 gekregen % The compiler expects an expression of type integer, but gets a different % type. type_e_boolean_expr_expected=04006_E_Boolean waarde verwacht, kreeg echter "$1" @@ -954,11 +1161,11 @@ type_e_ordinal_expr_expected=04007_E_Ordinale expressie verwacht % The expression must be of ordinal type, i.e., maximum a \var{Longint}. % This happens, for instance, when you specify a second argument % to \var{Inc} or \var{Dec} that doesn't evaluate to an ordinal value. -type_e_pointer_type_expected=04008_E_Pointertype verwacht +type_e_pointer_type_expected=04008_E_Pointer type verwacht, "$1" gekregen % The variable or expression isn't of the type \var{pointer}. This % happens when you pass a variable that isn't a pointer to \var{New} % or \var{Dispose}. -type_e_class_type_expected=04009_E_Klassetype verwacht +type_e_class_type_expected=04009_E_Klasse type verwacht, "$1" gekregen % The variable of expression isn't of the type \var{class}. This happens % typically when % \begin{enumerate} @@ -966,9 +1173,6 @@ type_e_class_type_expected=04009_E_Klassetype verwacht % \item An exception handler (\var{On}) contains a type identifier that % isn't a class. % \end{enumerate} -type_e_varid_or_typeid_expected=04010_E_Variabele- of typesymbool verwacht -% The argument to the \var{High} or \var{Low} function is not a variable -% nor a type identifier. type_e_cant_eval_constant_expr=04011_E_Kan constante expressie niet evalueren % No longer in use. type_e_set_element_are_not_comp=04012_E_Elementen van set zijn niet compatible @@ -1014,7 +1218,7 @@ type_w_maybe_wrong_hi_lo=04022_W_lo/hi(longint/dword) geeft hoog/laag (ipv byte) % to type case the argument to \var{word/integer} type_e_integer_or_real_expr_expected=04023_E_Integer of vlottende-komma uitdrukking verwacht % The first argument to \var{str} must a real or integer type. -type_e_wrong_type_in_array_constructor=04024_E_Verkeerd type in array constructor +type_e_wrong_type_in_array_constructor=04024_E_Verkeerd type "$1" in array constructor % You are trying to use a type in an array constructor which is not % allowed. type_e_wrong_parameter_type=04025_E_Incompatibel type voor argument #$1: kreeg $2, verwachtte $3 @@ -1061,6 +1265,106 @@ type_e_no_assign_to_const=04032_E_Kan geen waarde toekennen aan constante % This section lists all the messages that concern the handling of symbols. % This means all things that have to do with procedure and variable names. % \begin{description} +type_e_array_required=04033_E_ARRAY type verwacht +% If you are accessing a variable using an index '[]' then +% the type must be an array. In FPC mode also a pointer is allowed. +type_e_interface_type_expected=04034_E_Interface type verwacht, maar kreeg "$1" +type_w_mixed_signed_unsigned=04035_W_Mengen van mogelijk negatieve uitdrukkingen en longwords geeft een 64-bits resultaat +% If you divide (or calculate the modulus of) a signed expression by a longword (or vice versa), +% or if you have overflow and/or range checking turned on and use an arithmetic +% expression (+, -, *, div, mod) in which both signed numbers and longwords appear, +% then everything has to be evaluated in 64bit which is slower than normal +% 32bit arithmetic. You can avoid this by typecasting one operand so it +% matches the resulttype of the other one. +type_w_mixed_signed_unsigned2=04036_W_Mengen van mogelijk negatieve uitdrukkingen en cardinals kan tot range check fouten leiden +% If you use a binary operator (and, or, xor) and one of +% the operands is a longword while the other one is a signed expression, then, +% if range checking is turned on, you may get a range check error because in +% such a case both operands are converted to longword before the operation is +% carried out. You can avoid this by typecasting one operand so it +% matches the resulttype of the other one. +type_e_typecast_wrong_size_for_assignment=04037_E_Typecast heeft een verschillende grootte ($1 -> $2) in toekenning +% Type casting to a type with a different size is not allowed when the variable is +% used for assigning. +type_e_array_index_enums_with_assign_not_possible=04038_E_enumeratie typen met vaste waarden kunnen niet als array index gebruikt worden +% When you declared an enumeration type which has assignments in it, as in C, +% like in the following: +% \begin{verbatim} +% Tenum = (a,b,e:=5); +% \end{verbatim} +% you cannot use it as index of an array. +type_e_classes_not_related=04039_E_Klasse of object types "$1Ã" en "$2" zijn niet verwant +% There is a typecast from one class or object to another while the class/object +% are not related. This will probably lead to errors +type_w_classes_not_related=04040_W_Klasse types "$1" en "$2" zijn niet verwant +% There is a typecast from one class or object to another while the class/object +% are not related. This will probably lead to errors +type_e_class_or_interface_type_expected=04041_E_Klasse of interface type verwacht, maar kreeg Ã"$1Ã" +type_e_type_is_not_completly_defined=04042_E_Type "$1Ã" is niet volledig gedefinieerd +type_w_string_too_long=04043_W_String constante heeft meer karakters dan de lengte van een shortstring +% The size of the constant string, which is assigned to a shortstring, +% is longer than the maximum size of the shortstring +type_w_signed_unsigned_always_false=04044_W_De vergelijking is steeds onwaar omwille van de interval waarden +% There is a comparison between an unsigned value and a signed constant which is +% less than zero. Because of type promotion, the statement will always evaluate to +% false. Exlicitly typecast the constant to the correct range to avoid this problem. +type_w_signed_unsigned_always_true=04045_W_e vergelijking is steeds waar omwille van de interval waarden +% There is a comparison between an unsigned value and a signed constant which is +% less than zero. Because of type promotion, the statement will always evaluate to +% true. Exlicitly typecast the constant to the correct range to avoid this problem. +type_w_instance_with_abstract=04046_W_Constructie van een klasse "$1" met abstracte methoden +% An instance of a class is created which contains non-implemented abstract +% methods. This will probably lead to a runtime error 211 in the code if that +% routine is ever called. All abstract methods should be overriden. +type_h_in_range_check=04047_H_De linker operand van de IN operator moet de grootte van een byte hebben +% The left operand of the \var{in} operator is not an ordinal or enumeration which fits +% within 8-bits, this may lead to range check errors. The \var{in} operator +% currently only supports a left operand which fits within a byte. In the case of +% enumerations, the size of an element of an enumeration can be controlled with +% the \var{\{\$PACKENUM\}} or \var{\{\$Zn\}} switches. +type_w_smaller_possible_range_check=04048_W_Grootte-fout voor type, mogelijk verlies van gegevens/interval-check fout +% There is an assignment to a smaller type than the source type. This means that +% this may cause a range-check error, or may lead to possible loss of data. +type_h_smaller_possible_range_check=04049_H_Grootte-fout voor type, mogelijk verlies van gegevens/interval-check fout +% There is an assignment to a smaller type than the source type. This means that +% this may cause a range-check error, or may lead to possible loss of data. +type_e_cant_take_address_of_abstract_method=04050_E_Het adres van een abstracte methode kan niet opgevraagd worden +% An abstract method has no body, so the address of an abstract method can't be taken. +type_e_operator_not_allowed=04051_E_De operator kan niet gebruikt worden op dit type operand +% You are trying an operator that is not available for the type of the +% operands +type_e_constant_expr_expected=04052_E_Constante uitdrukking verwacht +% The compiler expects an constant expression, but gets a variable expression. +type_e_operator_not_supported_for_types=04053_E_Operatie "$1" niet ondersteund voor types "$2" en "$3" +% The operation is not allowed for the supplied types +type_e_illegal_type_conversion=04054_E_Ongeldige type-conversie: "$1" naar "$2" +% When doing a type-cast, you must take care that the sizes of the variable and +% the destination type are the same. +type_h_pointer_to_longint_conv_not_portable=04055_H_Conversies tussen ordinalen en pointers is niet overzetbaar naar andere platformen +% If you typecast a pointer to a longint (or vice-versa), this code will not compile +% on a machine using 64-bit for pointer storage. +type_w_pointer_to_longint_conv_not_portable=04056_W_Conversies tussen ordinalen en pointers is niet overzetbaar naar andere platformen +% If you typecast a pointer to a ordinal type of a different size (or vice-versa), this can +% cause problems. This is a warning to help finding the 32bit specific code where cardinal/longint is used +% to typecast pointers to ordinals. A solution is to use the ptrint/ptruint types instead. +type_e_cant_choose_overload_function=04057_E_Kan niet beslissen welke overladen functie te kiezen +% You're calling overloaded functions with a parameter that doesn't correspond +% to any of the declared function parameter lists. e.g. when you have declared +% a function with parameters \var{word} and \var{longint}, and then you call +% it with a parameter which is of type \var{integer}. +type_e_illegal_count_var=04058_E_Ongeldige lus variabele +% The type of a \var{for} loop variable must be an ordinal type. +% Loop variables cannot be reals or strings. +% \end{description} +# +# Symtable +# +# 05055 is the last used one +# +% \section{Symbol handling} +% This section lists all the messages that concern the handling of symbols. +% This means all things that have to do with procedure and variable names. +% \begin{description} sym_e_id_not_found=05000_E_Symbool niet gevonden $1 % The compiler doesn't know this symbol. Usually happens when you misspel % the name of a variable or procedure, or when you forgot to declare a @@ -1084,22 +1388,14 @@ sym_e_forward_not_resolved=05005_E_Voorwaartse declaratie niet opgelost $1 % \item You reference a type which isn't declared in the current \var{type} % block. % \end{itemize} -sym_f_id_already_typed=05006_F_Typesymbool reeds gedefineerd als type -% You are trying to redefine a type. sym_e_error_in_type_def=05007_E_Fout in type definitie % There is an error in your definition of a new array type: % \item One of the range delimiters in an array declaration is erroneous. % For example, \var{Array [1..1.25]} will trigger this error. -sym_e_type_id_not_defined=05008_E_Typesymbool niet gedefinieerd -% The type identifier has not been defined yet. sym_e_forward_type_not_resolved=05009_E_Forward declaratie niet opgelost $1 % The compiler encountered an unknown type. sym_e_only_static_in_static=05010_E_Alleen statische variabelen kunnen gebruikt worden in statische methoden % A static method of an object can only access static variables. -sym_e_invalid_call_tvarsymmangledname=05011_E_Ongeldige aanroep van tvarsym.mangledname() -% An internal error occurred in the compiler; If you encounter such an error, -% please contact the developers and try to provide an exact description of -% the circumstances in which the error occurs. sym_f_type_must_be_rec_or_class=05012_F_Record- of klassetype verwacht % The variable or expression isn't of the type \var{record} or \var{class}. sym_e_no_instance_of_abstract_object=05013_E_U kunt geen vertegenwoordiger van een klasse met abstracte methoden instantieren @@ -1107,7 +1403,7 @@ sym_e_no_instance_of_abstract_object=05013_E_U kunt geen vertegenwoordiger van e % method that wasn't overridden. sym_w_label_not_defined=05014_W_Label niet gedefineerd $1 % A label was declared, but not defined. -sym_e_label_used_and_not_defined=05015_E_Label gebruikt maar niet gedefinieerd +sym_e_label_used_and_not_defined=05015_E_Label "$1" gebruikt maar niet gedefinieerd % A label was declared and used, but not defined. sym_e_ill_label_decl=05016_E_Label foutief gedefineerd % This error should never happen; it occurs if a label is defined outside a @@ -1159,28 +1455,24 @@ sym_w_wrong_C_pack=05034_W_Type $1 is not aligned correctly in current record fo % for C structures. sym_e_illegal_field=05035_E_Onbekend record lid $1 % The field doesn't exist in the record definition. -sym_n_uninitialized_local_variable=05036_N_Locale variabele $1 lijkt niet geinitialiseerd te zijn -sym_n_uninitialized_variable=05037_W_Variabele $1 lijkt niet geinitialiseerd te zijn -% These messages are displayed if the compiler thinks that a variable will +sym_w_uninitialized_local_variable=05036_W_Lokale variabele "$1" lijkt niet geinitialiseerd +% This message is displayed if the compiler thinks that a variable will % be used (i.e. appears in the right-hand-side of an expression) when it -% wasn't initialized first (i.e. appeared in the left-hand side of an +% was not initialized first (i.e. appeared in the left-hand side of an +% assigment) +sym_w_uninitialized_variable=05037_W_okale variabele "$1" lijkt niet geinitialiseerd +% This message is displayed if the compiler thinks that a variable will +% be used (i.e. appears in the right-hand-side of an expression) when it +% was not initialized first (i.e. appeared in the left-hand side of an % assigment) sym_e_id_no_member=05038_E_Geen lid met de naam $1 % When using the extended syntax of \var{new}, you must specify the constructor % method of the class you are trying to create. The procedure you specified % does not exist. -sym_b_param_list=05039_B_Declaratie gevonden: $1 -% You get this when you use the \var{-vb} switch. In case an overloaded +sym_h_param_list=05039_H_NDeclaratie "$1" gevonden +% You get this when you use the \var{-vh} switch. In case an overloaded % procedure is not found, then all candidate overloaded procedures are % listed, with their parameter lists. -% \end{description} -# -# Codegenerator -# -% \section{Code generator messages} -% This section lists all messages that can be displayed if the code -% generator encounters an error condition. -% \begin{description} sym_e_segment_too_large=05040_E_Data segment te groot (max. 2GB) % You get this when you declare an array whose size exceeds the 2GB limit. % \end{description} @@ -1191,46 +1483,49 @@ sym_e_segment_too_large=05040_E_Data segment te groot (max. 2GB) % This section lists all messages that can be displayed if the code % generator encounters an error condition. % \begin{description} -cg_e_break_not_allowed=06000_E_BREAK niet toegelaten -% You're trying to use \var{break} outside a loop construction. -cg_e_continue_not_allowed=06001_E_CONTINUE niet toegelaten -% You're trying to use \var{continue} outside a loop construction. -cg_e_too_complex_expr=06002_E_Uitdrukking te ingewikkeld - overloop van wiskundige processor -% Your expression is too long for the compiler. You should try dividing the -% construct over multiple assignments. -cg_e_illegal_expression=06003_E_Foutieve uitdrukking -% This can occur under many circumstances. Mostly when trying to evaluate -% constant expressions. -cg_e_invalid_integer=06004_E_Foutieve gehele uitdruking -% You made an expression which isn't an integer, and the compiler expects the -% result to be an integer. -cg_e_invalid_qualifier=06005_E_Ongeldige constructie -% One of the following is happening : -% \begin{itemize} -% \item You're trying to access a field of a variable that is not a record. -% \item You're indexing a variable that is not an array. -% \item You're dereferencing a variable that is not a pointer. -% \end{itemize} -cg_e_upper_lower_than_lower=06006_E_Bovengrens is kleiner dan ondergrens -% You are declaring a subrange, and the lower limit is higher than the high -% limit of the range. -cg_e_illegal_count_var=06007_E_Ongeldige lusteller -% The type of a \var{for} loop variable must be an ordinal type. -% Loop variables cannot be reals or strings. -cg_e_cant_choose_overload_function=06008_E_Weet niet welke overroepen procedure moet worden aangeroepen -% You're calling overloaded functions with a parameter that doesn't correspond -% to any of the declared function parameter lists. e.g. when you have declared -% a function with parameters \var{word} and \var{longint}, and then you call -% it with a parameter which is of type \var{integer}. +sym_e_no_matching_implementation_found=05042_E_Geen overeenstemmende implementatie voor interface methode "$1" gevonden +% There was no matching method found which could implement the interface +% method. Check argument types and result type of the methods. +sym_w_deprecated_symbol=05043_W_Symbool "$1Ã" is afgeraden +% This means that a symbol (a variable, routine, etc...) which is +% declared as \var{deprecated} is used. Deprecated symbols may no longer +% be available in newer versions of the unit / library. Usage of this symbol +% should be avoided as much as possible. +sym_w_non_portable_symbol=05044_W_Symbool "$1" is niet overzetbaar naar andere platformen +% This means that a symbol (a variable, routine, etc...) which is +% declared as \var{platform} is used. This symbol's value, usage +% and availability is platform specific and should not be used +% if the source code must be portable. +sym_w_non_implemented_symbol=05055_W_Symbool "$1" is niet geimplementeerd +% This means that a symbol (a variable, routine, etc...) which is +% declared as \var{unimplemented} is used. This symbol is defined, +% but is not yet implemented on this specific platform. +sym_e_cant_create_unique_type=05056_E_Kan geen uniek type aanmaken van dit type +% Only simple types like ordinal, float and string types are supported when +% redefining a type with \var{type newtype = type oldtype;}. +sym_h_uninitialized_local_variable=05057_H_ Lokale variabele "$1" lijkt niet geinitialiseerd +% This message is displayed if the compiler thinks that a variable will +% be used (i.e. appears in the right-hand-side of an expression) when it +% was not initialized first (i.e. appeared in the left-hand side of an +% assigment) +sym_h_uninitialized_variable=05058_H_Lokale variabele "$1" lijkt niet geinitialiseerd +% This message is displayed if the compiler thinks that a variable will +% be used (i.e. appears in the right-hand-side of an expression) when it +% was not initialized first (i.e. appeared in the left-hand side of an +% assigment) +% \end{description} +# +# Codegenerator +# +# 06040 is the last used one +# +% \section{Code generator messages} +% This section lists all messages that can be displayed if the code +% generator encounters an error condition. +% \begin{description} cg_e_parasize_too_big=06009_E_Parameters gebruiken meer dan 64 kilobyte % The I386 processor limits the parameter list to 65535 bytes (the \var{RET} % instruction causes this) -cg_e_illegal_type_conversion=06010_E_Foute typeconversie -% When doing a type-cast, you must take care that the sizes of the variable and -% the destination type are the same. -cg_d_pointer_to_longint_conv_not_portable=06011_D_Conversie tussen ordinale en pointertypen is niet overdraagbaar naar andere processoren -% If you typecast a pointer to a longint, this code will not compile -% on a machine using 64bit for pointer storage. cg_e_file_must_call_by_reference=06012_E_File variabelen moeten altijd var parameters zijn % You cannot specify files as value parameters, i.e. they must always be % declared \var{var} parameters. @@ -1244,10 +1539,6 @@ cg_e_cant_use_far_pointer_there=06013_E_U kunt daar geen far pointer gebruiken % ... % p:=@mem[a000:000]; % \end{verbatim} -cg_e_var_must_be_reference=06014_E_Ongeldige aanroep met referentie parameters -% You are trying to pass a constant or an expression to a procedure that -% requires a \var{var} parameter. Only variables can be passed as a \var{var} -% parameter. cg_e_dont_call_exported_direct=06015_E_Procedures die als EXPORT gedeclareerd staan kunnen niet aangeroepen worden % No longer in use. cg_w_member_cd_call_from_method=06016_W_Mogelijke ongeldige aanroep van constructor of destructor @@ -1262,58 +1553,24 @@ cg_w_unreachable_code=06018_W_Deze code wordt nooit uitgevoerd % {.. code ...} % end; % \end{verbatim} -cg_e_stackframe_with_esp=06019_E_Procedure aanroep met stackframe ESP/SP -% The compiler encountered a procedure or function call inside a -% procedure that uses a \var{ESP/SP} stackframe. Normally, when a call is -% done the procedure needs a \var{EBP} stackframe. cg_e_cant_call_abstract_method=06020_E_Abstracte methoden kunnen niet direct aangeroepen worden % You cannot call an abstract method directy, instead you must call a % overriding child method, because an abstract method isn't implemented. -cg_f_internal_error_in_getfloatreg=06021_F_Interne fout in getfloatreg(), allocatie faling -% An internal error occurred in the compiler; If you encounter such an error, -% please contact the developers and try to provide an exact description of -% the circumstances in which the error occurs. -cg_f_unknown_float_type=06022_F_Onbekend vlottende-komma type -% The compiler cannot determine the kind of float that occurs in an expression. -cg_f_secondvecn_base_defined_twice=06023_F_SecondVecn() basis tweemaal gedefinieerd. -% An internal error occurred in the compiler; If you encounter such an error, -% please contact the developers and try to provide an exact description of -% the circumstances in which the error occurs. -cg_f_extended_cg68k_not_supported=06024_F_Extended cg68k niet ondersteund -% The var{extended} type is not supported on the m68k platform. -cg_f_32bit_not_supported_in_68000=06025_F_32-bit unsigned niet ondersteund in MC68000 modus -% The cardinal is not supported on the m68k platform. -cg_f_internal_error_in_secondinline=06026_F_Interne fout in secondinline() -% An internal error occurred in the compiler; If you encounter such an error, -% please contact the developers and try to provide an exact description of -% the circumstances in which the error occurs. -cg_d_register_weight=06027_D_Register $1 gewicht $2 $3 +cg_d_register_weight=06027_DL_Register $1 gewicht $2 $3 % Debugging message. Shown when the compiler considers a variable for % keeping in the registers. -cg_e_stacklimit_in_local_routine=06028_E_Stacklimiet overschreden in lokale routine -% Your code requires a too big stack. Some operating systems pose limits -% on the stack size. You should use less variables or try ro put large -% variables on the heap. -cg_d_stackframe_omited=06029_D_Stackframe wordt niet gemaakt +cg_d_stackframe_omited=06029_DL_Stackframe wordt niet gemaakt % Some procedure/functions do not need a complete stack-frame, so it is omitted. % This message will be displayed when the {-vd} switch is used. -cg_w_64bit_range_check_not_supported=06030_W_bereik check voor 64 bit integer is niet ondersteund op dit platform -% 64 bit range check is not yet implemented for 32 bit processors. cg_e_unable_inline_object_methods=06031_E_Kan inline niet gebruiken voor object methoden % You cannot have inlined object methods. cg_e_unable_inline_procvar=06032_E_Kan inline niet gebruiken voor procvar aanroepen % A procedure with a procedural variable call cannot be inlined. cg_e_no_code_for_inline_stored=06033_E_Geen code voor inline procedure opgeslagen % The compiler couldn't store code for the inline procedure. -cg_e_no_call_to_interrupt=06034_E_Directe oproep van interrupt procedure $1 is niet mogelijk -% You can not call an interrupt procedure directly from FPC code cg_e_can_access_element_zero=06035_E_Element nul van een ansi/wide- of longstring is niet toegankelijk, gebruik (set)length. % You should use \var{setlength} to set the length of an ansi/wide/longstring % and \var{length} to get the length of such kinf of string -cg_e_include_not_implemented=06036_E_Include en exclude niet ondersteund in dit geval -% \var{include} and \var{exclude} are only partially -% implemented for \var{i386} processors -% and not at all for \var{m68k} processors. cg_e_cannot_call_cons_dest_inside_with=06037_E_Constructors of destructors kunnen niet aangeroepen worden binnen een 'with' clausule % Inside a \var{With} clause you cannot call a constructor or destructor for the % object you have in the \var{with} clause. @@ -1361,14 +1618,38 @@ cg_e_control_flow_outside_finally=06040_E_Control flow statements niet toegestaa % executed. If the execution reaches the exit, it's unclear what to do: % exiting the procedure or searching for another exception handler # EndOfTeX -asmr_d_start_reading=07000_D_Begonnen met verwerken van $1 assembler +cg_w_parasize_too_big=06041_W_Grootte van de parameters is te groot voor bepaalde CPUs +% This indicates that you are declaring more than 64K of parameters, which +% might not be supported on other processor targets. +cg_w_localsize_too_big=06042_W_Grootte van lokale variabelen is te groot voor sommige CPUs +% This indicates that you are declaring more than 32K of local variables, which +% might not be supported on other processor targets. +cg_e_localsize_too_big=06043_E_Lokale variabelen te groot +% This indicates that you are declaring more than 32K of local variables, which +% is not supported by this processor. +cg_e_break_not_allowed=06044_E_BREAK niet toegelaten +% You're trying to use \var{break} outside a loop construction. +cg_e_continue_not_allowed=06045_E_CONTINUE niet toegelaten +% You're trying to use \var{continue} outside a loop construction. +cg_f_unknown_compilerproc=06046_F_Ongekende schakel-aanduiding "$1". Kijk na of u de correcte looptijd bibliotheek gebruikt +% The compiler expects that the runtime library contains some subrountines. If you see this error +% and you didn't mess with the runtime library, it's very likely that the runtime library +% you're using doesn't match the used compiler. If you changed the runtime library this error means +% that you removed a subroutine which the compiler needs for internal use. +% \end{description} +# EndOfTeX + +# +# Assembler reader +# +# 07097 is the last used one +# +asmr_d_start_reading=07000_DL_Begonnen met verwerken van $1 assembler % This informs you that an assembler block is being parsed -asmr_d_finish_reading=07001_D_Gedaan met verwerken van $1 assembler +asmr_d_finish_reading=07001_DL_Gedaan met verwerken van $1 assembler % This informs you that an assembler block has finished. asmr_e_none_label_contain_at=07002_E_Symbool dat geen label is bevat "@" % A identifier which isn't a label can't contain a @. -asmr_w_override_op_not_supported=07003_W_De "override" operator wordt niet ondersteund -% The Override operator is not supported asmr_e_building_record_offset=07004_E_Fout bij berekenen offset in record % There has an error occured while building the offset of a record/object % structure, this can happend when there is no field specified at all or @@ -1422,67 +1703,117 @@ asmr_w_CODE_and_DATA_not_supported=07023_W_@CODE en @DATA worden niet ondersteun % @CODE and @DATA are unsupported and are ignored. asmr_e_null_label_ref_not_allowed=07024_E_Null label verwijzingen zijn niet toegelaten asmr_e_expr_zero_divide=07025_E_Deling door nul +% There is a division by zero in a constant expression asmr_e_expr_illegal=07026_E_Ongeldige uitdrukking +% There is an illegal expression in a constant expression asmr_e_escape_seq_ignored=07027_E_Expliciete reeks genegeerd: $1 +% There is a C-styled string, but the escape sequence in the string +% is unknown, and is therefore ignored asmr_e_invalid_symbol_ref=07028_E_Ongeldige symboolverwijzing asmr_w_fwait_emu_prob=07029_W_Fwait kan emulatieproblemen met emu387 veroorzaken -asmr_w_fadd_to_faddp=07030_W_FADD zonder operand vertaald naar FADDP +asmr_w_fadd_to_faddp=07030_W_$1 zonder operand vertaald naar $1P asmr_w_enter_not_supported_by_linux=07031_W_De ENTER instructie wordt niet ondersteund door de Linux kernel % ENTER instruction can generate a stack page fault that is not % caught correctly by the i386 Linux page handler. asmr_w_calling_overload_func=07032_W_Een overroepen functie wordt aangeroepen vanuit assemblercode +% There is a call to an overloaded method in the assembler block, +% this might be the sign there is a problem asmr_e_unsupported_symbol_type=07033_E_Niet ondersteund symbool type voor operandus asmr_e_constant_out_of_bounds=07034_E_Constante waarde valt buiten bereik asmr_e_error_converting_decimal=07035_E_Fout bij omzetten van decimaal getal $1 +% A constant decimal value does not have the correct syntax asmr_e_error_converting_octal=07036_E_Fout bij omzetten van octaal getal $1 +% A constant octal value does not have the correct syntax asmr_e_error_converting_binary=07037_E_Fout bij omzetten van binair getal $1 +% A constant binary value does not have the correct syntax asmr_e_error_converting_hexadecimal=07038_E_Fout bij omzetten van hexadecimaal getal $1 +% A constant hexadecimal value does not have the correct syntax asmr_h_direct_global_to_mangled=07039_H_$1 vertaald naar $2 asmr_w_direct_global_is_overloaded_func=07040_W_$1 is geassocieerd met een overroepen functie asmr_e_cannot_use_SELF_outside_a_method=07041_E_Kan SELF niet buiten een methode gebruiken +% There is a reference to the \var{self} symbol while it is not +% allowed. \var{self} can only be referenced inside methods asmr_e_cannot_use_OLDEBP_outside_nested_procedure=07042_E_Kan OLDEBP niet buiten een genestelde procedure gebruiken +% There is a reference to the \var{oldebp} symbol while it is not +% allowed. \var{oldebp} can only be referenced inside nested routines asmr_e_void_function=07043_W_Functies met een ongedefinieerde teruggeefwaarde kunnen geen waarde teruggeven -asmr_e_SEG_not_supported=07044_E_SEG not supported +% Trying to return a value while in a procedure. A procedure +% does not have any return value +asmr_e_SEG_not_supported=07044_E_SEG niet ondersteund asmr_e_size_suffix_and_dest_dont_match=07045_E_Grootte-achtervoegsel en doel- of brongrootte komen niet overeen +% The register size and the opcode size suffix don't match. This is +% probably an error in the assembler statement asmr_w_size_suffix_and_dest_dont_match=07046_W_Grootte-achtervoegsel en doel- of brongrootte komen niet overeen +% The register size and the opcode size suffix don't match. This is +% probably an error in the assembler statement asmr_e_syntax_error=07047_E_Assembler taalfout +% There is an assembler syntax error asmr_e_invalid_opcode_and_operand=07048_E_Ongeldige combinatie van instructie en operandi +% The opcode cannot be used with this type of operand asmr_e_syn_operand=07049_E_Assembler taalfout in operandum asmr_e_syn_constant=07050_E_Assembler taalfout in constante asmr_e_invalid_string_expression=07051_E_Ongeldige String uitdrukking -asmr_w_const32bit_for_address=07052_ bits constante gemaakt voor adres +asmr_w_const32bit_for_address=07052_W_ Constante met symbool $1 voor adres dat zich niet op een pointer bevindt +% A constant expression represents an address which does not fit +% into a pointer. The address is probably incorrect asmr_e_unknown_opcode=07053_E_Ongekende opcode $1 +% This opcode is not known asmr_e_invalid_or_missing_opcode=07054_E_Ongeldige of ontbrekende instructie asmr_e_invalid_prefix_and_opcode=07055_E_Ongeldige combinatie van voorvoegsel en instructie: $1 asmr_e_invalid_override_and_opcode=07056_E_Ongeldige combinatie van segment overroeping en instructie: $1 asmr_e_too_many_operands=07057_E_Te veel operandi op een lijn +% There are too many operands for this opcode. Check your +% assembler syntax asmr_w_near_ignored=07058_W_NEAR genegeerd asmr_w_far_ignored=07059_W_FAR genegeerd asmr_e_dup_local_sym=07060_E_Dubbel lokaal symbool $1 asmr_e_unknown_local_sym=07061_E_Niet gedefinieerd lokaal symbool $1 asmr_e_unknown_label_identifier=07062_E_Onbekende labelnaam $1 asmr_e_invalid_register=07063_E_Ongeldige register naam +% There is an unknown register name used as operand. asmr_e_invalid_fpu_register=07064_E_Ongeldig vlottende-komma registernaam -asmr_e_nor_not_supported=07065_E_NOR wordt niet ondersteund +% There is an unknown register name used as operand. asmr_w_modulo_not_supported=07066_W_Modulo wordt niet ondersteund asmr_e_invalid_float_const=07067_E_Ongeldige vlottende-komma constante $1 +% The floating point constant declared in an assembler block is +% invalid. asmr_e_invalid_float_expr=07068_E_Ongeldige vlottende-komma uitdrukking +% The floating point expression declared in an assembler block is +% invalid. asmr_e_wrong_sym_type=07069_E_Verkeerd symbool type asmr_e_cannot_index_relative_var=07070_E_Een lokale variabele of parameter kan niet geindedxeerd worden met een register +% Trying to index using a base register a symbol which is already relative +% to a register. This is not possible, and will probably lead to crashes. asmr_e_invalid_seg_override=07071_E_Ongeldige segment overroeping asmr_w_id_supposed_external=07072_W_Symbool $1 wordt verondersteld extern te zijn +% There is a reference to an undefined symbol. This will not result +% in an error, since the symbol might be external, but may cause +% problems at link time if the symbol is not defined anywhere. asmr_e_string_not_allowed_as_const=07073_E_Strings zijn niet toegelaten als constante +% Character strings are not allowed as constants. asmr_e_no_var_type_specified=07074_Geen type van de variabele gegeven +% The syntax expects a type idenfitifer after the dot, but +% none was found. asmr_w_assembler_code_not_returned_to_text=07075_E_De assembler code stopt niet in een '.text' gedeelte +% There was a directive in the assembler block to change sections, +% but there is a missing return to the text section at the end +% of the assembler block. This might cause errors during link time. asmr_e_not_directive_or_local_symbol=07076_E_Geen aanwijzing of lokaal symbool $1 +% This symbol is unknown. asmr_w_using_defined_as_local=07077_E_Een gedfinieerde naam wordt gebruikt als assembler label # # Assembler/binary writers # asmr_e_dollar_without_identifier=07078_E_Dollar teken gebruikt zonder identifier +% A constant expression has an identifier which does not start with +% the $ symbol. asmr_w_32bit_const_for_address=07079_W_32bit constante aangemaakt voor adres +% A constant was used as an address. This is probably an error, +% since using absolute addresses will probably not work. asmr_n_align_is_target_specific=07080_N_.align is doel specifiek, gebruik .balign of .p2align +% Using the .align directive is platform specific, and its meaning will vary +% from one platform to another. asmr_e_cannot_access_field_directly_for_parameters=07081_E_Kan velden niet direct gebruiken voor parameters. % You should load the parameter first into a register and then access the % fields using that register. @@ -1493,10 +1824,59 @@ asmr_e_cannot_access_object_field_directly=07082_E_Kan velden van objecten/klass # # Assembler/binary writers # +asmr_e_unable_to_determine_reference_size=07083_E_Geen grootte aangegegeven en kan de grootte van de operanden niet bepalen +% You should specify explicitly a size for the reference, because +% the compiler is unable to determine what size (byte,word,dword,etc.) it +% should use for the reference. +asmr_e_cannot_use_RESULT_here=07084_E_Kan RESULT aanduiding niet gebruiken in deze functie +% Some functions which return complex types cannot use the \var{result} +% keyword. +asmr_w_adding_explicit_args_fXX=07086_W_"$1Ã" zonder operand vertaald naar "$1 %st,%st(1)" +asmr_w_adding_explicit_first_arg_fXX=07087_W_"$1 %st(n)" vertaald naar "$1 %st,%st(n)" +asmr_w_adding_explicit_second_arg_fXX=07088_W_"$1 %st(n)" vertaald naar "$1 %st(n),%st" +asmr_e_invalid_char_smaller=07089_E_Karakter < hier niet toegestaan +% The shift operator requires the << characters. Only one +% of those characters was found. +asmr_e_invalid_char_greater=07090_E_Karakter > hier niet toegestaan +% The shift operator requires the >> characters. Only one +% of those characters was found. +asmr_w_align_not_supported=07093_W_ALIGN niet ondersteund +asmr_e_no_inc_and_dec_together=07094_E_INC en DEC kunnen niet samengaan +% Trying to use an increment and a decrement within the same +% opcode on the 680x0. This is impossible. +asmr_e_invalid_reg_list_in_movem=07095_E_Ongeldige register lijst voor movem +% Trying to use the \var{movem} opcode with invalid registers +% to save or restore. +asmr_e_invalid_reg_list_for_opcode=07096_E_Ongeldige register lijst voor opcode +asmr_e_higher_cpu_mode_required=07097_E_hogere CPU mode vereist ($1) +% Trying to use an instruction which is not supported in the current +% cpu mode. Use a higher cpu generation to be able to use this +% opcode in your assembler block +asmr_w_unable_to_determine_reference_size_using_dword=07098_W_Grootte niet opgegeven en kan de grootte van de operanden niet bepalen. De standaard DWORD wordt gebruikt +% You should specify explicitly a size for the reference, because +% the compiler is unable to determine what size (byte,word,dword,etc.) it +% should use for the reference. This warning is only used in Delphi mode where +% it falls back to use DWORD as default. +asmr_e_illegal_shifterop_syntax=07099_E_Syntax fout bij het bepalen van een shift operand +% ARM only; ARM assembler supports a so called shifter operand. The used syntax isn't +% a valid shifter operand. Example for an operation with shifter operand: +% \begin{verbatim} +% asm +% orr r2,r2,r2,lsl #8 +% end; +% \end{verbatim} +# +# Assembler/binary writers +# +# 08018 is the last used one +# asmw_f_too_many_asm_files=08000_F_Te veel assemblerbestanden +% With smartlinking enabled, there are too many assembler +% files generated. Disable smartlinking. asmw_f_assembler_output_not_supported=08001_F_De geselecteerde assembler modus wordt hier niet ondersteund asmw_f_comp_not_supported=08002_F_Het COMP type wordt hier niet ondersteund asmw_f_direct_not_supported=08003_F_Directe assembler modus wordt niet ondersteund door de binaire assemblerschrijver +% Direct assembler mode is not supported for binary writers. asmw_e_alloc_data_only_in_bss=08004_E_Ruimte voor gegevens reserveren mag enkel in een bss gedeelte asmw_f_no_binary_writer_selected=08005_F_Binaire assemblerschrijver geselecteerd asmw_e_opcode_not_in_table=08006_E_Asm: Opcode $1 not gevonden in interne tabel @@ -1522,6 +1902,24 @@ asmw_e_undefined_label=08013_E_Asm: Ongedefinieerd label $1 % This section lists errors that occur when the compiler is processing the % command line or handling the configuration files. % \begin{description} +asmw_e_comp_not_supported=08014_E_Asm: COMP type niet ondersteund voor dit platfirl +asmw_e_extended_not_supported=08015_E_Asm: EXTENDED type niet ondersteund voor dit platform +asmw_e_duplicate_label=08016_E_Asm: Label dubbel gebruikt: $1 +asmw_e_redefined_label=08017_E_Asm: Label opnieuw gedefinieerd: $1 +asmw_e_first_defined_label=08018_E_Asm: eerste definitie hier +asmw_e_invalid_register=08019_E_Asm: ongeldig register $1 + +# +# Executing linker/assembler +# +# 09034 is the last used one +# +# BeginOfTeX +% +% \section{Errors of assembling/linking stage} +% This section lists errors that occur when the compiler is processing the +% command line or handling the configuration files. +% \begin{description} exec_w_source_os_redefined=09000_W_Bronbesturingssysteem geherdefinieerd exec_i_assembling_pipe=09001_I_Assembleren (pijp) van $1 exec_d_cant_create_asmfile=09002_E_Kan geen assembler bestand $1 niet maken @@ -1533,34 +1931,54 @@ exec_e_cant_create_objectfile=09003_E_Kan geen object bestand openen: $1 exec_e_cant_create_archivefile=09004_E_kan geen archief bestand openen: $1 % The mentioned file can't be create. Check if you've % permission to create this file -exec_w_assembler_not_found=09005_W_Assembler $1 niet gevonden, overschakeling naar externe assemblage +exec_e_assembler_not_found=09005_E_Assembler $1 niet gevonden. Schakel over op externe assemblage exec_t_using_assembler=09006_T_Gebruikte assembler: $1 -exec_w_error_while_assembling=09007_W_Fout bij assembleren -exec_w_cant_call_assembler=09008_W_Kan assembleerder niet oproepen, overschakeling naar externe assemblage +exec_e_error_while_assembling=09007_E_Fout bij het assembleren, exit code $1 +% There was an error while assembling the file using an external assembler. +% Consult the documentation of the assembler tool to find out more information +% on this error. +exec_e_cant_call_assembler=09008_E_Kan de assembler niet oproepen, fout $1. Schakel over op externe assemblage exec_i_assembling=09009_I_Assembleren van $1 exec_i_assembling_smart=09010_I_Assembleren slim-link $1 -exec_w_objfile_not_found=09011_E_Bestand $1 niet gevonden, linken kan foutlopen ! -exec_w_libfile_not_found=09012_E_Bibliotheek $1 niet gevonden, linken kan foutlopen ! -exec_w_error_while_linking=09013_W_Fout tijdens linken -exec_w_cant_call_linker=09014_W_Kan linker niet oproepen, overschakeling naar extern linken +exec_w_objfile_not_found=09011_W_Bestand $1 niet gevonden, linken kan foutlopen ! +% One of the object file is missing, and linking will probably fail. +% Check your paths. +exec_w_libfile_not_found=09012_W_Bibliotheek $1 niet gevonden, linken kan foutlopen ! +% One of the library file is missing, and linking will probably fail. +% Check your paths. +exec_e_error_while_linking=09013_E_Fout bij het linken +% Generic error while linking. +exec_e_cant_call_linker=09014_E_Kan de linker niet oproepen, schakel over op extern linken exec_i_linking=09015_I_Linken van $1 -exec_w_util_not_found=09016_W_Tool $1 niet gevonden, schakel over op extern linken. +exec_e_util_not_found=09016_E_Gereedschap $1 niet gevonden, schakel over op extern linken exec_t_using_util=09017_T_Gebruik tool $1 exec_e_exe_not_supported=09018_E_Creatie van executable bestanden niet ondersteund. exec_e_dll_not_supported=09019_E_Dynamische bibliotheken niet ondersteund exec_i_closing_script=09020_I_Afsluiten batch $1 -exec_w_res_not_found=09021_W_resource compiler niet gevonden, ga over op externe modus +exec_e_res_not_found=09021_E_Resource compiler niet gevonde, schakel over op externe modus exec_i_compilingresource=09022_I_Compileer resource $1 # # Executable information # -execinfo_f_cant_process_executable=09023_F_Kan applicatie niet nabehandelen $1 -execinfo_f_cant_open_executable=09024_F_Kan applicatie niet openen $1 -execinfo_x_codesize=09025_X_Grootte van de code: $1 bytes -execinfo_x_initdatasize=09026_X_Grootte van geinitialiseerde data: $1 bytes -execinfo_x_uninitdatasize=09027_X_Grootte van niet-geinitialiseerde data: $1 bytes -execinfo_x_stackreserve=09028_X_Gereserveerde stackruimte: $1 bytes -execinfo_x_stackcommit=09029_X_Toegewezen stackruimte: $1 bytes +exec_t_unit_not_static_linkable_switch_to_smart=09023_T_Unit $1 kan niet statisch gelinkt worden. Schakel over op slim linken +exec_t_unit_not_smart_linkable_switch_to_static=09024_T_Unit $1 kan niet slim gelinkt worden. Schakel over op statisch linken +exec_t_unit_not_shared_linkable_switch_to_static=09025_T_Unit $1 kan niet gedeeld gelinkt worden, Schakel over op statisch linken +exec_e_unit_not_smart_or_static_linkable=09026_E_Unit $1 kan niet slim of statisch gelinkt worden +exec_e_unit_not_shared_or_static_linkable=09027_E_Unit $1 kan niet gedeeld of statisch gelinkt worden +exec_d_resbin_params=09028_D_Oproep resource compiler "$1" met "$2" als commando-lijn opties +%\end{description} +# EndOfTeX + +# +# Executable information +# +execinfo_f_cant_process_executable=09128_F_Kan applicatie niet nabehandelen $1 +execinfo_f_cant_open_executable=09129_F_Kan applicatie niet openen $1 +execinfo_x_codesize=09130_X_Grootte van de code: $1 bytes +execinfo_x_initdatasize=09131_X_Grootte van geinitialiseerde data: $1 bytes +execinfo_x_uninitdatasize=09132_X_Grootte van niet-geinitialiseerde data: $1 bytes +execinfo_x_stackreserve=09133_X_Gereserveerde stackruimte: $1 bytes +execinfo_x_stackcommit=09134_X_Toegewezen stackruimte: $1 bytes # Unit loading # # BeginOfTeX @@ -1572,22 +1990,22 @@ execinfo_x_stackcommit=09029_X_Toegewezen stackruimte: $1 bytes unit_t_unitsearch=10000_T_Unit zoeken: $1 % When you use the \var{-vt}, the compiler tells you where it tries to find % unit files. -unit_t_ppu_loading=10001_U_PPU Laden $1 +unit_t_ppu_loading=10001_T_PPU Laden $1 % When the \var{-vt} switch is used, the compiler tells you % what units it loads. unit_u_ppu_name=10002_U_PPU Naam: $1 % When you use the \var{-vu} flag, the unit name is shown. -unit_u_ppu_flags=10003_D_PPU Vlaggen: $1 +unit_u_ppu_flags=10003_U_PPU Vlaggen: $1 % When you use the \var{-vu} flag, the unit flags are shown. -unit_u_ppu_crc=10004_D_PPU CRC: $1 +unit_u_ppu_crc=10004_U_PPU CRC: $1 % When you use the \var{-vu} flag, the unit CRC check is shown. -unit_u_ppu_time=10005_D_PPU Tijd: $1 +unit_u_ppu_time=10005_U_PPU Tijd: $1 % When you use the \var{-vu} flag, the unit time is shown. -unit_u_ppu_file_too_short=10006_D_PPU bestand te kort +unit_u_ppu_file_too_short=10006_U_PPU bestand te kort % When you use the \var{-vu} flag, the unit time is shown. -unit_u_ppu_invalid_header=10007_D_PPU Ongeldige kop (geen PPU aan het begin) +unit_u_ppu_invalid_header=10007_U_PPU Ongeldige kop (geen PPU aan het begin) % A unit file contains as the first three bytes the ascii codes of \var{PPU} -unit_u_ppu_invalid_version=10008_D_PPU Ongeldige versie $1 +unit_u_ppu_invalid_version=10008_U_PPU Ongeldige versie $1 % This unit file was compiled with a different version of the compiler, and % cannot be read. unit_u_ppu_invalid_processor=10009_U_PPU is gecompileerd voor een andere processor @@ -1619,7 +2037,7 @@ unit_f_too_much_units=10019_F_Te veel units % \fpc has a limit of 1024 units in a program. You can change this behavior % by changing the \var{maxunits} constant in the \file{files.pas} file of the % compiler, and recompiling the compiler. -unit_f_circular_unit_reference=10020_F_Uses statement veroorzaakt vicieuze cirkel +unit_f_circular_unit_reference=10020_F_Uses statement veroorzaakt vicieuze cirkel tussen $1 en $2 % Two units are using each other in the interface part. This is only allowed % in the \var{implementation} part. At least one unit must contain the other one % in the \var{implementation} section. @@ -1658,10 +2076,10 @@ unit_u_recompile_obj_and_asm_older=10032_U_Hercompileer unit, object en asm zijn unit_u_recompile_obj_older_than_asm=10033_U_Hercompileer unit, object is ouder dan assembler % When you use the \var{-vu} flag, the compiler warns if the assembler % file of the unit is older than the object file of the unit. -unit_u_start_parse_interface=10034_U_Parsen van interface van $1 +unit_u_parsing_interface=10034_U_Interface van $1 wordt geparsed % When you use the \var{-vu} flag, the compiler warns that it starts % parsing the interface part of the unit -unit_u_start_parse_implementation=10035_U_Parsen van implementatie van $1 +unit_u_parsing_implementation=10035_U_Implementatie van $1 wordt geparsed % When you use the \var{-vu} flag, the compiler warns that it starts % parsing the implementation part of the unit unit_u_second_load_unit=10036_U_Tweede maal unit $1 laden @@ -1676,6 +2094,81 @@ unit_u_check_time=10037_U_PPU Controleren van bestand $1 tijd $2 # # Options # +unit_w_cant_compile_unit_with_changed_incfile=10040_W_Kan unit $1 niet hercompileren, maar vond gewijzigde include bestanden +% A unit was found to have modified include files, but +% some source files were not found, so recompilation is impossible. +unit_h_source_modified=10041_H_Bestand $1 is nieuwer dan release PPU bestand $2 +% A modified source file for a unit was found that was compiled with the +% release flag (-Ur). The unit will not implicitly be recompiled because +% this release flag is set. +unit_u_ppu_invalid_fpumode=10042_U_Er wordt een unit gebruikt die niet met de correcte FPU modus is gecompileerd +% Trying to compile code while using units which were not compiled with +% the same floating point format mode. Either all code should be compiled +% with FPU emulation on, or with FPU emulation off. +unit_u_loading_interface_units=10043_U_Laden van interface units voor unit $1 +% When you use the \var{-vu} flag, the compiler warns that it starts +% loading the units defined in the interface part of the unit. +unit_u_loading_implementation_units=10044_U_Laden van implementatie units voor unit $1 +% When you use the \var{-vu} flag, the compiler warns that it starts +% loading the units defined in the implementation part of the unit. +unit_u_interface_crc_changed=10045_U_Interface CRC voor unit $1 is gewijzigd +% When you use the \var{-vu} flag, the compiler warns that it the +% CRC calculated for the interface has been changed after the implementation +% has been parsed. +unit_u_implementation_crc_changed=10046_U_Implementatie CRC voor unit $1 is gewijzigd +% When you use the \var{-vu} flag, the compiler warns that it the +% CRC calculated has been changed after the implementation +% has been parsed. +unit_u_finished_compiling=10047_U_Klaar met compileren van unit Â$1 +% When you use the \var{-vu} flag, the compiler warns that it +% has finished compiling the unit. +unit_u_add_depend_to=10048_U_Afhankelijkheid van $1 toegevoegd aan $2 +% When you use the \var{-vu} flag, the compiler warns that it +% has added a dependency between the two units. +unit_u_no_reload_is_caller=10049_U_Niet herladen, oproeper is: $1 +% When you use the \var{-vu} flag, the compiler warns that it +% has will not reload the unit because it is the unit that wants +% to load this unit +unit_u_no_reload_in_second_compile=10050_U_Niet herladen, reads in tweede compilatie: $1 +% When you use the \var{-vu} flag, the compiler warns that it +% has will not reload the unit because it is already in a second recompile +unit_u_flag_for_reload=10051_U_Vlaggen voor herladen: $1 +% When you use the \var{-vu} flag, the compiler warns that it +% has to reload the unit +unit_u_forced_reload=10052_U_Verplicht herladen +% When you use the \var{-vu} flag, the compiler warns that it +% has is reloading the unit because it was required +unit_u_previous_state=10053_U_Vorige toestand van $1: $2 +% When you use the \var{-vu} flag, the compiler shows the +% previous state of the unit +unit_u_second_compile_unit=10054_U_$1 wordt reeds gecompileerd, tweede compile wordt gezet +% When you use the \var{-vu} flag, the compiler warns that it starts +% recompiling a unit for the second time. This can happend with interdepend +% units. +unit_u_loading_unit=10055_U_Laden unit $1 +% When you use the \var{-vu} flag, the compiler warns that it starts +% loading the unit. +unit_u_finished_loading_unit=10056_U_Klaar met laden van unit $1 +% When you use the \var{-vu} flag, the compiler warns that it finished +% loading the unit. +unit_u_registering_new_unit=10057_U_Nieuwe unit $1 wordt geregistreerd +% When you use the \var{-vu} flag, the compiler warns that it has +% found a new unit and registers it in the internal lists. +unit_u_reresolving_unit=10058_U_Opnieuw oplossen van unit $1 +% When you use the \var{-vu} flag, the compiler warns that it +% has to recalculate the internal data of the unit +unit_u_skipping_reresolving_unit=10059_U_Oplossen van unit $1 wordt overgeslagen, gebruikte units worden nog geladen +% When you use the \var{-vu} flag, the compiler warns that it +% skips to recalculate the internal data of the unit because there +% is no data to recalculate +% \end{description} +# EndOfTeX + +# +# Options +# +# 11039 is the last used one +# option_usage=11000_$1 [opties] [opties] # BeginOfTeX % @@ -1683,56 +2176,56 @@ option_usage=11000_$1 [opties] [opties] % This section lists errors that occur when the compiler is processing the % command line or handling the configuration files. % \begin{description} -option_only_one_source_support=11001_Maar een (1) bronbestand wordt ondersteunt +option_only_one_source_support=11001_W_Maar een (1) bronbestand wordt ondersteunt % You can specify only one source file on the command line. The first % one will be compiled, others will be ignored. This may indicate that % you forgot a \var{'-'} sign. -option_def_only_for_os2=11002_Een DEF file kan alleen worden gemaakt voor OS/2 +option_def_only_for_os2=11002_W_Een DEF file kan alleen worden gemaakt voor OS/2 % This option can only be specified when you're compiling for OS/2 -option_no_nested_response_file=11003_Geneste optie bestanden niet ondersteund +option_no_nested_response_file=11003_E_Geneste optie bestanden niet ondersteund % you cannot nest response files with the \var{@file} command-line option. -option_no_source_found=11004_Geen bronbestand op de commando-lijn +option_no_source_found=11004_F_Geen bronbestand op de commando-lijn % The compiler expects a source file name on the command line. option_no_option_found=11005_N_geen opties in configuratie bestand $1 % The compiler didn't find any option in that config file. -option_illegal_para=11006_Ongeldige parameter: $1 +option_illegal_para=11006_E_Ongeldige parameter: $1 % You specified an unknown option. -option_help_pages_para=11007_-? druk hulp af +option_help_pages_para=11007_H_-? druk hulp af % When an unknown option is given, this message is diplayed. -option_too_many_cfg_files=11008_Te veel geneste instellingsbestanden +option_too_many_cfg_files=11008_F_Te veel geneste instellingsbestanden % You can only nest up to 16 config files. -option_unable_open_file=11009_Kan bestand $1 niet openen +option_unable_open_file=11009_F_Kan bestand $1 niet openen % The option file cannot be found. -option_reading_further_from=11010_Meer instellingen worden gelezen van $1 +option_reading_further_from=11010_D_Meer instellingen worden gelezen van $1 % Displayed when you have notes turned on, and the compiler switches % to another options file. -option_target_is_already_set=11011_Doel is reeds ingesteld op: $1 +option_target_is_already_set=11011_W_Doel is reeds ingesteld op: $1 % Displayed if more than one \var{-T} option is specified. -option_no_shared_lib_under_dos=11012_Shared bibliotheken niet onderteund onder DOS, val terug op statisch +option_no_shared_lib_under_dos=11012_W_Shared bibliotheken niet onderteund onder DOS, val terug op statisch % If you specify \var{-CD} for the \dos platform, this message is displayed. % The compiler supports only static libraries under \dos -option_too_many_ifdef=11013_Te veel IF(N)DEFs +option_too_many_ifdef=11013_F_Te veel IF(N)DEFs % the \var{\#IF(N)DEF} statements in the options file are not balanced with % the \var{\#ENDIF} statements. -option_too_many_endif=11014_Te veel ENDIFs +option_too_many_endif=11014_F_Te veel ENDIFs % the \var{\#IF(N)DEF} statements in the options file are not balanced with % the \var{\#ENDIF} statements. -option_too_less_endif=11015_Open voorwaardelijke aan eind van bestand +option_too_less_endif=11015_F_Open voorwaardelijke aan eind van bestand % the \var{\#IF(N)DEF} statements in the options file are not balanced with % the \var{\#ENDIF} statements. -option_no_debug_support=11016_Debug informatie generatie wordt niet ondersteund door deze applicatie +option_no_debug_support=11016_W_Debug informatie generatie wordt niet ondersteund door deze applicatie % It is possible to have a compiler executable that doesn't support % the generation of debugging info. If you use such an executable with the % \var{-g} switch, this warning will be displayed. -option_no_debug_support_recompile_fpc=11017_Hercompileer de compiler-applicatie met -dGDB +option_no_debug_support_recompile_fpc=11017_H_Hercompileer de compiler-applicatie met -dGDB % It is possible to have a compiler executable that doesn't support % the generation of debugging info. If you use such an executable with the % \var{-g} switch, this warning will be displayed. -option_obsolete_switch=11018_W_U gebruikt een in onbruik geraakte schakeloptie $1 +option_obsolete_switch=11018_E_U gebruikt een in onbruik geraakte schakeloptie $1 % this warns you when you use a switch that is not needed/supported anymore. % It is recommended that you remove the switch to overcome problems in the % future, when the switch meaning may change. -option_obsolete_switch_use_new=11019_W_U gebruikt een in onbruik geraakte schakeloptie $1, gebruik $2 a.u.b. +option_obsolete_switch_use_new=11019_E_U gebruikt een in onbruik geraakte schakeloptie $1, gebruik $2 a.u.b. % this warns you when you use a switch that is not supported anymore. You % must now use the second switch instead. % It is recommended that you change the switch to overcome problems in the @@ -1748,6 +2241,31 @@ option_asm_forced=11022_W_Gebruik van "$1" assembler opgelegd %\end{description} # EndOfTeX +# +# Logo (option -l) +# +option_using_file=11026_T_Opties worden gelezen van bestand $1 +% Options are also read from this file +option_using_env=11027_T_Opties worden gelezen van omgevingsvariabelen $1 +% Options are also read from this environment string +option_handling_option=11028_D_Behandelen van optie "$1" +% Debug info that an option is found and will be handled +option_help_press_enter=11029__***Druk op de ENTER toets*** +option_start_reading_configfile=11030_H_Start lezen van configuratie bestand $1 +% Starting of config file parsing. +option_end_reading_configfile=11031_H_Einde van lezen van configuratie bestand $1 +% End of config file parsing. +option_interpreting_option=11032_D_Optie $1 wordt behandeld +option_interpreting_firstpass_option=11036_D_Behandel prioritaire optie "$1" +option_interpreting_file_option=11033_D_Behandel bestandsoptie "$1" +option_read_config_file=11034_D_Lezen configuratie bestand "$1" +option_found_file=11035_D_Bronbestand "$1" gevonden +% Additional infos about options, displayed +% when you have debug option turned on. +option_code_page_not_available=11039_E_Ongekende coderingspagina +%\end{description} +# EndOfTeX + # # Logo (option -l) #