diff --git a/compiler/htypechk.pas b/compiler/htypechk.pas index f0705d28b7..6d9bbe136e 100644 --- a/compiler/htypechk.pas +++ b/compiler/htypechk.pas @@ -1026,6 +1026,11 @@ implementation absolutesym, varsym : begin + { loop counter? } + if not(Valid_Const in opts) and + (vo_is_loop_counter in tvarsym(tloadnode(hp).symtableentry).varoptions) then + CGMessage1(parser_e_illegal_assignment_to_count_var,tloadnode(hp).symtableentry.realname); + { derefed pointer } if (tvarsym(tloadnode(hp).symtableentry).varspez=vs_const) then begin { allow p^:= constructions with p is const parameter } @@ -1896,24 +1901,27 @@ implementation begin { Maybe passing the correct type but passing a const to var parameter } if (compare_defs(pt.resulttype.def,hp^.wrongpara.paratype.def,pt.nodetype)<>te_incompatible) and - not valid_for_var(pt) then - CGMessagePos(pt.fileinfo,type_e_variable_id_expected) + not valid_for_var(pt.left) then + CGMessagePos(pt.left.fileinfo,type_e_variable_id_expected) else - CGMessagePos2(pt.fileinfo,parser_e_call_by_ref_without_typeconv, - FullTypeName(pt.resulttype.def,hp^.wrongpara.paratype.def), - FullTypeName(hp^.wrongpara.paratype.def,pt.resulttype.def)) + CGMessagePos2(pt.left.fileinfo,parser_e_call_by_ref_without_typeconv, + FullTypeName(pt.left.resulttype.def,hp^.wrongpara.paratype.def), + FullTypeName(hp^.wrongpara.paratype.def,pt.left.resulttype.def)) end else - CGMessagePos3(pt.fileinfo,type_e_wrong_parameter_type,tostr(hp^.wrongparanr), - FullTypeName(pt.resulttype.def,hp^.wrongpara.paratype.def), - FullTypeName(hp^.wrongpara.paratype.def,pt.resulttype.def)); + CGMessagePos3(pt.left.fileinfo,type_e_wrong_parameter_type,tostr(hp^.wrongparanr), + FullTypeName(pt.left.resulttype.def,hp^.wrongpara.paratype.def), + FullTypeName(hp^.wrongpara.paratype.def,pt.left.resulttype.def)); end; end. { $Log$ - Revision 1.96 2004-08-22 11:24:09 peter + Revision 1.97 2004-09-13 20:28:27 peter + * for loop variable assignment is not allowed anymore + + Revision 1.96 2004/08/22 11:24:09 peter * fix error when passing constant to var parameter Revision 1.95 2004/06/23 16:22:45 peter diff --git a/compiler/msg/errore.msg b/compiler/msg/errore.msg index 55fad41213..0e65021807 100644 --- a/compiler/msg/errore.msg +++ b/compiler/msg/errore.msg @@ -975,6 +975,9 @@ parser_e_upper_lower_than_lower=03206_E_High range limit < low range limit % limit of the range. parser_e_macpas_exit_wrong_param=03207_E_Exit's parameter must be the name of the procedure it is used in % Non local exit is not allowed. This error occur only in mode MacPas. +parser_e_illegal_assignment_to_count_var=03208_E_Illegal assignment to for-loop variable "$1" +% The type of a \var{for} loop variable must be an ordinal type. +% Loop variables cannot be reals or strings. % \end{description} # # Type Checking diff --git a/compiler/msgidx.inc b/compiler/msgidx.inc index c87408d026..850a5ca96c 100644 --- a/compiler/msgidx.inc +++ b/compiler/msgidx.inc @@ -270,6 +270,7 @@ const parser_e_invalid_qualifier=03205; parser_e_upper_lower_than_lower=03206; parser_e_macpas_exit_wrong_param=03207; + parser_e_illegal_assignment_to_count_var=03208; type_e_mismatch=04000; type_e_incompatible_types=04001; type_e_not_equal_types=04002; @@ -644,9 +645,9 @@ const option_info=11024; option_help_pages=11025; - MsgTxtSize = 36925; + MsgTxtSize = 36978; MsgIdxMax : array[1..20] of longint=( - 18,66,208,59,57,46,99,20,35,60, + 18,66,209,59,57,46,99,20,35,60, 40,1,1,1,1,1,1,1,1,1 ); diff --git a/compiler/msgtxt.inc b/compiler/msgtxt.inc index 472449258c..536f9137a2 100644 --- a/compiler/msgtxt.inc +++ b/compiler/msgtxt.inc @@ -1,7 +1,7 @@ {$ifdef Delphi} -const msgtxt : array[0..000153] of string[240]=( +const msgtxt : array[0..000154] of string[240]=( {$else Delphi} -const msgtxt : array[0..000153,1..240] of char=( +const msgtxt : array[0..000154,1..240] of char=( {$endif Delphi} '01000_T_Compiler: $1'#000+ '01001_D_Compiler OS: $1'#000+ @@ -305,597 +305,597 @@ const msgtxt : array[0..000153,1..240] of char=( '03206_E_High range limit < low range limit'#000+ '03207_E_Exit'#039's parameter must be the n','ame of the procedure it is'+ ' used in'#000+ + '03208_E_Illegal assignment to for-loop variable "$1"'#000+ '04000_E_Type mismatch'#000+ '04001_E_Incompatible types: got "$1" expected "$2"'#000+ '04002_E_Type mismatch between "$1" and "$2"'#000+ '04003_E_Type identifier expected'#000+ - '04004_E_Variable identifier expected'#000+ - '04005_E_Integer ex','pression expected, but got "$1"'#000+ + '04','004_E_Variable identifier expected'#000+ + '04005_E_Integer expression expected, but got "$1"'#000+ '04006_E_Boolean expression expected, but got "$1"'#000+ '04007_E_Ordinal expression expected'#000+ '04008_E_pointer type expected, but got "$1"'#000+ - '04009_E_class type expected, but got "$1"'#000+ - '04011_E_Can'#039't evaluate constant expr','ession'#000+ + '04009_E_class type expect','ed, but got "$1"'#000+ + '04011_E_Can'#039't evaluate constant expression'#000+ '04012_E_Set elements are not compatible'#000+ '04013_E_Operation not implemented for sets'#000+ '04014_W_Automatic type conversion from floating type to COMP which is '+ 'an integer type'#000+ - '04015_H_use DIV instead to get an integer result'#000+ - '04016_E_string ','types doesn'#039't match, because of $V+ mode'#000+ + '04015_H_use',' DIV instead to get an integer result'#000+ + '04016_E_string types doesn'#039't match, because of $V+ mode'#000+ '04017_E_succ or pred on enums with assignments not possible'#000+ '04018_E_Can'#039't read or write variables of this type'#000+ - '04019_E_Can'#039't use readln or writeln on typed file'#000+ - '04020_E_Can'#039't use read or write on unt','yped file.'#000+ + '04019_E_Can'#039't use readln or writeln',' on typed file'#000+ + '04020_E_Can'#039't use read or write on untyped file.'#000+ '04021_E_Type conflict between set elements'#000+ '04022_W_lo/hi(dword/qword) returns the upper/lower word/dword'#000+ '04023_E_Integer or real expression expected'#000+ - '04024_E_Wrong type "$1" in array constructor'#000+ - '04025_E_Incompatible type for arg n','o. $1: Got "$2", expected "$3"'#000+ + '04024_E_Wrong type "$1" in ','array constructor'#000+ + '04025_E_Incompatible type for arg no. $1: Got "$2", expected "$3"'#000+ '04026_E_Method (variable) and Procedure (variable) are not compatible'#000+ '04027_E_Illegal constant passed to internal math function'#000+ - '04028_E_Can'#039't get the address of constants'#000+ - '04029_E_Argument can'#039't be assigned to'#000, + '04028_E_Can'#039't get the addres','s of constants'#000+ + '04029_E_Argument can'#039't be assigned to'#000+ '04030_E_Can'#039't assign local procedure/function to procedure variabl'+ 'e'#000+ '04031_E_Can'#039't assign values to an address'#000+ '04032_E_Can'#039't assign values to const variable'#000+ '04033_E_Array type required'#000+ - '04034_E_interface type expected, but got "$1"'#000+ - '04035_W_Mi','xing signed expressions and longwords gives a 64bit result'+ - #000+ + '040','34_E_interface type expected, but got "$1"'#000+ + '04035_W_Mixing signed expressions and longwords gives a 64bit result'#000+ '04036_W_Mixing signed expressions and cardinals here may cause a range'+ ' check error'#000+ - '04037_E_Typecast has different size ($1 -> $2) in assignment'#000+ - '04038_E_enums with assignments can'#039't ','be used as array index'#000+ + '04037_E_Typecast has different size ($1 -> $2',') in assignment'#000+ + '04038_E_enums with assignments can'#039't be used as array index'#000+ '04039_E_Class or Object types "$1" and "$2" are not related'#000+ '04040_W_Class types "$1" and "$2" are not related'#000+ - '04041_E_Class or interface type expected, but got "$1"'#000+ + '04041_E_Class or interface type expected, but got "$1"',#000+ '04042_E_Type "$1" is not completely defined'#000+ - '04043_W_','String literal has more characters than short string length'#000+ + '04043_W_String literal has more characters than short string length'#000+ '04044_W_Comparison is always false due to range of values'#000+ '04045_W_Comparison is always true due to range of values'#000+ - '04046_W_Constructing a class "$1" with abstract methods'#000+ - '04047_H_T','he left operand of the IN operator should be byte sized'#000+ + '04046_W_Cons','tructing a class "$1" with abstract methods'#000+ + '04047_H_The left operand of the IN operator should be byte sized'#000+ '04048_W_Type size mismatch, possible loss of data / range check error'#000+ - '04049_H_Type size mismatch, possible loss of data / range check error'#000+ - '04050_E_The address of an abstract method ca','n'#039't be taken'#000+ + '04049_H_Type size mismatch, possible loss of data / range che','ck erro'+ + 'r'#000+ + '04050_E_The address of an abstract method can'#039't be taken'#000+ '04051_E_The operator is not applicable for the operand type'#000+ '04052_E_Constant Expression expected'#000+ '04053_E_Operation "$1" not supported for types "$2" and "$3"'#000+ - '04054_E_Illegal type conversion: "$1" to "$2"'#000+ - '04055_H_Conversion betw','een ordinals and pointers is not portable'#000+ + '04054_E_Illegal ','type conversion: "$1" to "$2"'#000+ + '04055_H_Conversion between ordinals and pointers is not portable'#000+ '04056_W_Conversion between ordinals and pointers is not portable'#000+ '04057_E_Can'#039't determine which overloaded function to call'#000+ - '04058_E_Illegal counter variable'#000+ + '04058_E_Illegal counte','r variable'#000+ '05000_E_Identifier not found "$1"'#000+ - '05001_F_','Internal Error in SymTableStack()'#000+ + '05001_F_Internal Error in SymTableStack()'#000+ '05002_E_Duplicate identifier "$1"'#000+ '05003_H_Identifier already defined in $1 at line $2'#000+ '05004_E_Unknown identifier "$1"'#000+ - '05005_E_Forward declaration not solved "$1"'#000+ + '05005_E_Forward declaration not sol','ved "$1"'#000+ '05007_E_Error in type definition'#000+ - '05009_E_For','ward type not resolved "$1"'#000+ + '05009_E_Forward type not resolved "$1"'#000+ '05010_E_Only static variables can be used in static methods or outside'+ ' methods'#000+ '05012_F_record or class type expected'#000+ - '05013_E_Instances of classes or objects with an abstract method are no'+ - 't allowed'#000+ - '05014_W_Label n','ot defined "$1"'#000+ + '05013_E_Instances of classes or objects wi','th an abstract method are '+ + 'not allowed'#000+ + '05014_W_Label not defined "$1"'#000+ '05015_E_Label used but not defined "$1"'#000+ '05016_E_Illegal label declaration'#000+ '05017_E_GOTO and LABEL are not supported (use switch -Sg)'#000+ '05018_E_Label not found'#000+ - '05019_E_identifier isn'#039't a label'#000+ + '05019_E_identif','ier isn'#039't a label'#000+ '05020_E_label already defined'#000+ - '05021','_E_illegal type declaration of set elements'#000+ + '05021_E_illegal type declaration of set elements'#000+ '05022_E_Forward class definition not resolved "$1"'#000+ '05023_H_Unit "$1" not used in $2'#000+ '05024_H_Parameter "$1" not used'#000+ - '05025_N_Local variable "$1" not used'#000+ - '05026_H_Value parameter "$1" is assigned bu','t never used'#000+ + '05025_N_Local variable "$1"',' not used'#000+ + '05026_H_Value parameter "$1" is assigned but never used'#000+ '05027_N_Local variable "$1" is assigned but never used'#000+ '05028_H_Local $1 "$2" is not used'#000+ '05029_N_Private field "$1.$2" is never used'#000+ - '05030_N_Private field "$1.$2" is assigned but never used'#000+ - '05031_N_Private method "$1.$2" never ','used'#000+ + '05030_N_Private field "$1.$2" is assigned',' but never used'#000+ + '05031_N_Private method "$1.$2" never used'#000+ '05032_E_Set type expected'#000+ '05033_W_Function result does not seem to be set'#000+ '05034_W_Type "$1" is not aligned correctly in current record for C'#000+ - '05035_E_Unknown record field identifier "$1"'#000+ - '05036_W_Local variable "$1" does not seem to be i','nitialized'#000+ + '05035_E_Unknown record field identifier "','$1"'#000+ + '05036_W_Local variable "$1" does not seem to be initialized'#000+ '05037_W_Variable "$1" does not seem to be initialized'#000+ '05038_E_identifier idents no member "$1"'#000+ '05039_H_Found declaration: $1'#000+ '05040_E_Data element too large'#000+ - '05042_E_No matching implementation for interface method "$1" found'#000+ - '05043_','W_Symbol "$1" is deprecated'#000+ + '05042_E_No matching ','implementation for interface method "$1" found'#000+ + '05043_W_Symbol "$1" is deprecated'#000+ '05044_W_Symbol "$1" is not portable'#000+ '05055_W_Symbol "$1" is not implemented'#000+ '05056_E_Can'#039't create unique type from this type'#000+ - '06009_E_Parameter list size exceeds 65535 bytes'#000+ - '06012_E_File types must be var parameters',#000+ + '06009_E_Parameter list size exceeds ','65535 bytes'#000+ + '06012_E_File types must be var parameters'#000+ '06013_E_The use of a far pointer isn'#039't allowed there'#000+ '06015_E_EXPORT declared functions can'#039't be called'#000+ '06016_W_Possible illegal call of constructor or destructor'#000+ - '06017_N_Inefficient code'#000+ + '06017_N_Inefficient code',#000+ '06018_W_unreachable code'#000+ - '06020_E_Abstract methods ca','n'#039't be called directly'#000+ + '06020_E_Abstract methods can'#039't be called directly'#000+ '06027_DL_Register $1 weight $2 $3'#000+ '06029_DL_Stack frame is omitted'#000+ '06031_E_Object or class methods can'#039't be inline.'#000+ '06032_E_Procvar calls cannot be inline.'#000+ - '06033_E_No code for inline procedure stored'#000+ - '06035_E_Element ze','ro of an ansi/wide- or longstring can'#039't be acc'+ - 'essed, use (set)length instead'#000+ + '06033_E_N','o code for inline procedure stored'#000+ + '06035_E_Element zero of an ansi/wide- or longstring can'#039't be acces'+ + 'sed, use (set)length instead'#000+ '06037_E_Constructors or destructors can not be called inside a '#039'wi'+ 'th'#039' clause'#000+ - '06038_E_Cannot call message handler methods directly'#000+ - '06039_E_Jump in or outside of an ','exception block'#000+ + '06038_E_Cannot call message handl','er methods directly'#000+ + '06039_E_Jump in or outside of an exception block'#000+ '06040_E_Control flow statements aren'#039't allowed in a finally block'#000+ '06041_W_Parameters size exceeds limit for certain cpu'#039's'#000+ - '06042_W_Local variable size exceed limit for certain cpu'#039's'#000+ - '06043_E_Local variables size exceeds suppor','ted limit'#000+ + '06042_W_Local variable size exceed limit for cert','ain cpu'#039's'#000+ + '06043_E_Local variables size exceeds supported limit'#000+ '06044_E_BREAK not allowed'#000+ '06045_E_CONTINUE not allowed'#000+ '07000_DL_Starting $1 styled assembler parsing'#000+ '07001_DL_Finished $1 styled assembler parsing'#000+ - '07002_E_Non-label pattern contains @'#000+ + '07002_E_Non-label pattern cont','ains @'#000+ '07004_E_Error building record offset'#000+ - '07005_E_O','FFSET used without identifier'#000+ + '07005_E_OFFSET used without identifier'#000+ '07006_E_TYPE used without identifier'#000+ '07007_E_Cannot use local variable or parameters here'#000+ '07008_E_need to use OFFSET here'#000+ '07009_E_need to use $ here'#000+ - '07010_E_Cannot use multiple relocatable symbols'#000+ - '07011_E_Reloc','atable symbol can only be added'#000+ + '07010_E_','Cannot use multiple relocatable symbols'#000+ + '07011_E_Relocatable symbol can only be added'#000+ '07012_E_Invalid constant expression'#000+ '07013_E_Relocatable symbol is not allowed'#000+ '07014_E_Invalid reference syntax'#000+ - '07015_E_You can not reach $1 from that code'#000+ - '07016_E_Local symbols/labels aren'#039't allowed as refere','nces'#000+ + '07015_E_You can not reach $1 from that code'#000, + '07016_E_Local symbols/labels aren'#039't allowed as references'#000+ '07017_E_Invalid base and index register usage'#000+ '07018_W_Possible error in object field handling'#000+ '07019_E_Wrong scale factor specified'#000+ '07020_E_Multiple index register usage'#000+ - '07021_E_Invalid operand type'#000+ - '07022_E_Invalid string as opcode oper','and: $1'#000+ + '07021_E_Inval','id operand type'#000+ + '07022_E_Invalid string as opcode operand: $1'#000+ '07023_W_@CODE and @DATA not supported'#000+ '07024_E_Null label references are not allowed'#000+ '07025_E_Divide by zero in asm evaluator'#000+ '07026_E_Illegal expression'#000+ - '07027_E_escape sequence ignored: $1'#000+ + '07027_E_escape sequence igno','red: $1'#000+ '07028_E_Invalid symbol reference'#000+ - '07029_W_Fwai','t can cause emulation problems with emu387'#000+ + '07029_W_Fwait can cause emulation problems with emu387'#000+ '07030_W_$1 without operand translated into $1P'#000+ '07031_W_ENTER instruction is not supported by Linux kernel'#000+ - '07032_W_Calling an overload function in assembler'#000+ - '07033_E_Unsupported symbol type for opera','nd'#000+ + '07032_W_Calling an overload function i','n assembler'#000+ + '07033_E_Unsupported symbol type for operand'#000+ '07034_E_Constant value out of bounds'#000+ '07035_E_Error converting decimal $1'#000+ '07036_E_Error converting octal $1'#000+ '07037_E_Error converting binary $1'#000+ '07038_E_Error converting hexadecimal $1'#000+ - '07039_H_$1 translated to $2'#000+ - '07040_W_$1 is associated to',' an overloaded function'#000+ + '07','039_H_$1 translated to $2'#000+ + '07040_W_$1 is associated to an overloaded function'#000+ '07041_E_Cannot use SELF outside a method'#000+ '07042_E_Cannot use OLDEBP outside a nested procedure'#000+ '07043_W_Procedures can'#039't return any value in asm code'#000+ - '07044_E_SEG not supported'#000+ - '07045_E_Size suffix and destination or sou','rce size do not match'#000+ + '07044_E_SEG not',' supported'#000+ + '07045_E_Size suffix and destination or source size do not match'#000+ '07046_W_Size suffix and destination or source size do not match'#000+ '07047_E_Assembler syntax error'#000+ '07048_E_Invalid combination of opcode and operands'#000+ - '07049_E_Assembler syntax error in operand'#000+ - '07050_E_Assembler syntax error',' in constant'#000+ + '07049_E_Assembler s','yntax error in operand'#000+ + '07050_E_Assembler syntax error in constant'#000+ '07051_E_Invalid String expression'#000+ '07052_W_constant with symbol $1 for address which is not on a pointer'#000+ '07053_E_Unrecognized opcode $1'#000+ '07054_E_Invalid or missing opcode'#000+ - '07055_E_Invalid combination of prefix and opcode: $1'#000+ - '07056','_E_Invalid combination of override and opcode: $1'#000+ + '07055','_E_Invalid combination of prefix and opcode: $1'#000+ + '07056_E_Invalid combination of override and opcode: $1'#000+ '07057_E_Too many operands on line'#000+ '07058_W_NEAR ignored'#000+ '07059_W_FAR ignored'#000+ '07060_E_Duplicate local symbol $1'#000+ - '07061_E_Undefined local symbol $1'#000+ + '07061_E_Undefined local symb','ol $1'#000+ '07062_E_Unknown label identifier $1'#000+ - '07063_E_Inv','alid register name'#000+ + '07063_E_Invalid register name'#000+ '07064_E_Invalid floating point register name'#000+ '07066_W_Modulo not supported'#000+ '07067_E_Invalid floating point constant $1'#000+ '07068_E_Invalid floating point expression'#000+ - '07069_E_Wrong symbol type'#000+ - '07070_E_Cannot index a local var or ','parameter with a register'#000+ + '07069_E_W','rong symbol type'#000+ + '07070_E_Cannot index a local var or parameter with a register'#000+ '07071_E_Invalid segment override expression'#000+ '07072_W_Identifier $1 supposed external'#000+ '07073_E_Strings not allowed as constants'#000+ - '07074_No type of variable specified'#000+ + '07074_No type of variable specified'#000, '07075_E_assembler code not returned to text section'#000+ - '0','7076_E_Not a directive or local symbol $1'#000+ + '07076_E_Not a directive or local symbol $1'#000+ '07077_E_Using a defined name as a local label'#000+ '07078_E_Dollar token is used without an identifier'#000+ '07079_W_32bit constant created for address'#000+ - '07080_N_.align is target specific, use .balign or .p2align',#000+ + '07080','_N_.align is target specific, use .balign or .p2align'#000+ '07081_E_Can'#039't access fields directly for parameters'#000+ '07082_E_Can'#039't access fields of objects/classes directly'#000+ '07083_E_No size specified and unable to determine the size of the oper'+ 'ands'#000+ - '07084_E_Cannot use RESULT in this function'#000+ - '07086_W_"$1" ','without operand translated into "$1 %st,%st(1)"'#000+ + '070','84_E_Cannot use RESULT in this function'#000+ + '07086_W_"$1" without operand translated into "$1 %st,%st(1)"'#000+ '07087_W_"$1 %st(n)" translated into "$1 %st,%st(n)"'#000+ '07088_W_"$1 %st(n)" translated into "$1 %st(n),%st"'#000+ '07089_E_Char < not allowed here'#000+ - '07090_E_Char > not allowed here'#000+ - '07093_W_ALIGN not suppor','ted'#000+ + '070','90_E_Char > not allowed here'#000+ + '07093_W_ALIGN not supported'#000+ '07094_E_Inc and Dec cannot be together'#000+ '07095_E_Invalid reglist for movem'#000+ '07096_E_Reglist invalid for opcode'#000+ '07097_E_Higher cpu mode required ($1)'#000+ - '07098_W_No size specified and unable to determine the size of the oper'+ - 'ands, using DWORD as',' default'#000+ + '07098_W_No size specified and unable ','to determine the size of the op'+ + 'erands, using DWORD as default'#000+ '08000_F_Too many assembler files'#000+ '08001_F_Selected assembler output not supported'#000+ '08002_F_Comp not supported'#000+ '08003_F_Direct not support for binary writers'#000+ - '08004_E_Allocating of data is only allowed in bss section'#000+ - '08005_F_No binary w','riter selected'#000+ + '08004_E_Allocating of da','ta is only allowed in bss section'#000+ + '08005_F_No binary writer selected'#000+ '08006_E_Asm: Opcode $1 not in table'#000+ '08007_E_Asm: $1 invalid combination of opcode and operands'#000+ '08008_E_Asm: 16 Bit references not supported'#000+ - '08009_E_Asm: Invalid effective address'#000+ + '08009_E_Asm: Invalid effective a','ddress'#000+ '08010_E_Asm: Immediate or reference expected'#000+ - '0','8011_E_Asm: $1 value exceeds bounds $2'#000+ + '08011_E_Asm: $1 value exceeds bounds $2'#000+ '08012_E_Asm: Short jump is out of range $1'#000+ '08013_E_Asm: Undefined label $1'#000+ '08014_E_Asm: Comp type not supported for this target'#000+ - '08015_E_Asm: Extended type not supported for this target'#000+ - '08016_E_Asm: Dup','licate label $1'#000+ + '08015_E_Asm: Extende','d type not supported for this target'#000+ + '08016_E_Asm: Duplicate label $1'#000+ '08017_E_Asm: Redefined label $1'#000+ '08018_E_Asm: First defined here'#000+ '08019_E_Asm: Invalid register $1'#000+ '09000_W_Source operating system redefined'#000+ '09001_I_Assembling (pipe) $1'#000+ - '09002_E_Can'#039't create assember file: $1'#000+ - '09003_E_Can'#039't cre','ate object file: $1'#000+ + '090','02_E_Can'#039't create assember file: $1'#000+ + '09003_E_Can'#039't create object file: $1'#000+ '09004_E_Can'#039't create archive file: $1'#000+ '09005_E_Assembler $1 not found, switching to external assembling'#000+ '09006_T_Using assembler: $1'#000+ - '09007_E_Error while assembling exitcode $1'#000+ - '09008_E_Can'#039't call the assembler, error $1 swi','tching to external'+ - ' assembling'#000+ + '09007_E_Error while assembling exitc','ode $1'#000+ + '09008_E_Can'#039't call the assembler, error $1 switching to external a'+ + 'ssembling'#000+ '09009_I_Assembling $1'#000+ '09010_I_Assembling with smartlinking $1'#000+ '09011_W_Object $1 not found, Linking may fail !'#000+ - '09012_W_Library $1 not found, Linking may fail !'#000+ + '09012_W_Library $1 not found, Linking may fail ','!'#000+ '09013_E_Error while linking'#000+ - '09014_E_Can'#039't call the ','linker, switching to external linking'#000+ + '09014_E_Can'#039't call the linker, switching to external linking'#000+ '09015_I_Linking $1'#000+ '09016_E_Util $1 not found, switching to external linking'#000+ '09017_T_Using util $1'#000+ '09018_E_Creation of Executables not supported'#000+ - '09019_E_Creation of Dynamic/Shared Libraries not supported',#000+ + '09019','_E_Creation of Dynamic/Shared Libraries not supported'#000+ '09020_I_Closing script $1'#000+ '09021_E_resource compiler not found, switching to external mode'#000+ '09022_I_Compiling resource $1'#000+ - '09023_T_unit $1 can'#039't be statically linked, switching to smart lin'+ + '09023_T_unit $1 can'#039't be statically linked, switching to smart lin', 'king'#000+ - '09024_T_unit $1 can'#039't be smart linked, switching',' to static linki'+ - 'ng'#000+ + '09024_T_unit $1 can'#039't be smart linked, switching to static linking'+ + #000+ '09025_T_unit $1 can'#039't be shared linked, switching to static linkin'+ 'g'#000+ '09026_E_unit $1 can'#039't be smart or static linked'#000+ '09027_E_unit $1 can'#039't be shared or static linked'#000+ - '09028_F_Can'#039't post process executable $1'#000+ - '09029_F_Can'#039't o','pen executable $1'#000+ + '090','28_F_Can'#039't post process executable $1'#000+ + '09029_F_Can'#039't open executable $1'#000+ '09030_X_Size of Code: $1 bytes'#000+ '09031_X_Size of initialized data: $1 bytes'#000+ '09032_X_Size of uninitialized data: $1 bytes'#000+ '09033_X_Stack space reserved: $1 bytes'#000+ - '09034_X_Stack space commited: $1 bytes'#000+ + '09034_X_Sta','ck space commited: $1 bytes'#000+ '10000_T_Unitsearch: $1'#000+ - '10','001_T_PPU Loading $1'#000+ + '10001_T_PPU Loading $1'#000+ '10002_U_PPU Name: $1'#000+ '10003_U_PPU Flags: $1'#000+ '10004_U_PPU Crc: $1'#000+ '10005_U_PPU Time: $1'#000+ '10006_U_PPU File too short'#000+ '10007_U_PPU Invalid Header (no PPU at the begin)'#000+ - '10008_U_PPU Invalid Version $1'#000+ - '10009_U_PPU is compiled for ','another processor'#000+ + '10008_','U_PPU Invalid Version $1'#000+ + '10009_U_PPU is compiled for another processor'#000+ '10010_U_PPU is compiled for an other target'#000+ '10011_U_PPU Source: $1'#000+ '10012_U_Writing $1'#000+ '10013_F_Can'#039't Write PPU-File'#000+ '10014_F_Error reading PPU-File'#000+ - '10015_F_unexpected end of PPU-File'#000+ + '10015_F_unexpected end ','of PPU-File'#000+ '10016_F_Invalid PPU-File entry: $1'#000+ - '10017_','F_PPU Dbx count problem'#000+ + '10017_F_PPU Dbx count problem'#000+ '10018_E_Illegal unit name: $1'#000+ '10019_F_Too much units'#000+ '10020_F_Circular unit reference between $1 and $2'#000+ '10021_F_Can'#039't compile unit $1, no sources available'#000+ - '10022_F_Can'#039't find unit $1'#000+ - '10023_W_Unit $1 was not found but ','$2 exists'#000+ + '10022_F_','Can'#039't find unit $1'#000+ + '10023_W_Unit $1 was not found but $2 exists'#000+ '10024_F_Unit $1 searched but $2 found'#000+ '10025_W_Compiling the system unit requires the -Us switch'#000+ '10026_F_There were $1 errors compiling module, stopping'#000+ - '10027_U_Load from $1 ($2) unit $3'#000+ - '10028_U_Recompiling $1, checksum changed for',' $2'#000+ + '10027_U_Load from $1 ($2)',' unit $3'#000+ + '10028_U_Recompiling $1, checksum changed for $2'#000+ '10029_U_Recompiling $1, source found only'#000+ '10030_U_Recompiling unit, static lib is older than ppufile'#000+ '10031_U_Recompiling unit, shared lib is older than ppufile'#000+ - '10032_U_Recompiling unit, obj and asm are older than ppufile'#000+ - '10033_U_Recompi','ling unit, obj is older than asm'#000+ + '10032_U_Recompiling uni','t, obj and asm are older than ppufile'#000+ + '10033_U_Recompiling unit, obj is older than asm'#000+ '10034_U_Parsing interface of $1'#000+ '10035_U_Parsing implementation of $1'#000+ '10036_U_Second load for unit $1'#000+ '10037_U_PPU Check file $1 time $2'#000+ - '10038_H_Conditional $1 was not set at startup in last compilation of $'+ - '2'#000, + '10038_H_Conditional',' $1 was not set at startup in last compilation of'+ + ' $2'#000+ '10039_H_Conditional $1 was set at startup in last compilation of $2'#000+ '10040_W_Can'#039't recompile unit $1, but found modifed include files'#000+ '10041_H_File $1 is newer than Release PPU file $2'#000+ - '10042_U_Using a unit which was not compiled with correct ','FPU mode'#000+ + '1004','2_U_Using a unit which was not compiled with correct FPU mode'#000+ '10043_U_Loading interface units from $1'#000+ '10044_U_Loading implementation units from $1'#000+ '10045_U_Interface CRC changed for unit $1'#000+ '10046_U_Implementation CRC changed for unit $1'#000+ - '10047_U_Finished compiling unit $1'#000+ - '10048_U_Add dependency',' of $1 to $2'#000+ + '1004','7_U_Finished compiling unit $1'#000+ + '10048_U_Add dependency of $1 to $2'#000+ '10049_U_No reload, is caller: $1'#000+ '10050_U_No reload, already in second compile: $1'#000+ '10051_U_Flag for reload: $1'#000+ '10052_U_Forced reloading'#000+ '10053_U_Previous state of $1: $2'#000+ - '10054_U_Already compiling $1, setting second compile'#000+ - '10055_','U_Loading unit $1'#000+ + '10054_','U_Already compiling $1, setting second compile'#000+ + '10055_U_Loading unit $1'#000+ '10056_U_Finished loading unit $1'#000+ '10057_U_Registering new unit $1'#000+ '10058_U_Re-resolving unit $1'#000+ '10059_U_Skipping re-resolving unit $1, still loading used units'#000+ - '11000_$1 [options] [options]'#000+ - '11001_W_Only one source',' file supported'#000+ + '11000_$1 [o','ptions] [options]'#000+ + '11001_W_Only one source file supported'#000+ '11002_W_DEF file can be created only for OS/2'#000+ '11003_E_nested response files are not supported'#000+ '11004_F_No source file name in command line'#000+ - '11005_N_No option inside $1 config file'#000+ + '11005_N_No option inside $1 confi','g file'#000+ '11006_E_Illegal parameter: $1'#000+ - '11007_H_-? write','s help pages'#000+ + '11007_H_-? writes help pages'#000+ '11008_F_Too many config files nested'#000+ '11009_F_Unable to open file $1'#000+ '11010_D_Reading further options from $1'#000+ '11011_W_Target is already set to: $1'#000+ - '11012_W_Shared libs not supported on DOS platform, reverting to static'+ - #000+ - '11013_F_too',' many IF(N)DEFs'#000+ + '11012_W_Shared libs not suppo','rted on DOS platform, reverting to stat'+ + 'ic'#000+ + '11013_F_too many IF(N)DEFs'#000+ '11014_F_too many ENDIFs'#000+ '11015_F_open conditional at the end of the file'#000+ '11016_W_Debug information generation is not supported by this executab'+ 'le'#000+ - '11017_H_Try recompiling with -dGDB'#000+ - '11018_E_You are using the obsolete switch $1',#000+ + '11017_H_Try recompiling wi','th -dGDB'#000+ + '11018_E_You are using the obsolete switch $1'#000+ '11019_E_You are using the obsolete switch $1, please use $2'#000+ '11020_N_Switching assembler to default source writing assembler'#000+ - '11021_W_Assembler output selected "$1" is not compatible with "$2"'#000+ + '11021_W_Assembler output selected "$1" is not compatible with ','"$2"'#000+ '11022_W_"$1" assembler use forced'#000+ - '11026_T_Readin','g options from file $1'#000+ + '11026_T_Reading options from file $1'#000+ '11027_T_Reading options from environment $1'#000+ '11028_D_Handling option "$1"'#000+ '11029__*** press enter ***'#000+ '11030_H_Start of reading config file $1'#000+ - '11031_H_End of reading config file $1'#000+ + '11031_H_End of reading c','onfig file $1'#000+ '11032_D_interpreting option "$1"'#000+ - '11036_','D_interpreting firstpass option "$1"'#000+ + '11036_D_interpreting firstpass option "$1"'#000+ '11033_D_interpreting file option "$1"'#000+ '11034_D_Reading config file "$1"'#000+ '11035_D_found source file name "$1"'#000+ '11037_D_Defining symbol $1'#000+ - '11038_D_Undefining symbol $1'#000+ + '11038_D_Undefini','ng symbol $1'#000+ '11039_E_Unknown code page'#000+ - '11023_Free Pas','cal Compiler version $FPCVER [$FPCDATE] for $FPCTARGET'+ - #010+ + '11023_Free Pascal Compiler version $FPCVER [$FPCDATE] for $FPCTARGET'#010+ 'Copyright (c) 1993-2004 by Florian Klaempfl'#000+ '11024_Free Pascal Compiler version $FPCVER'#010+ #010+ 'Compiler Date : $FPCDATE'#010+ - 'Compiler Target: $FPCTARGET'#010+ + 'Compiler Target: $','FPCTARGET'#010+ #010+ 'Supported targets:'#010+ ' $OSTARGETS'#010+ #010+ - 'This prog','ram comes under the GNU General Public Licence'#010+ + 'This program comes under the GNU General Public Licence'#010+ 'For more information read COPYING.FPC'#010+ #010+ 'Report bugs,suggestions etc to:'#010+ ' bugrep@freepascal.org'#000+ - '11025_**0*_put + after a boolean switch option to enable it, - to disa'+ - 'ble it'#010+ - '**1a_t','he compiler doesn'#039't delete the generated assembler file'#010+ + '11025_**0*_put + after a boole','an switch option to enable it, - to di'+ + 'sable it'#010+ + '**1a_the compiler doesn'#039't delete the generated assembler file'#010+ '**2al_list sourcecode lines in assembler file'#010+ '**2ar_list register allocation/release info in assembler file'#010+ - '**2at_list temp allocation/release info in assembler file'#010+ - '**1b_generate brow','ser info'#010+ + '**2at_list temp allocat','ion/release info in assembler file'#010+ + '**1b_generate browser info'#010+ '**2bl_generate local symbol info'#010+ '**1B_build all modules'#010+ '**1C_code generation options:'#010+ '**2CD_create also dynamic library (not supported)'#010+ - '**2Ce_Compilation with emulated floating point opcodes'#010+ - '**2Cf_Select fpu instruction set to u','se'#010+ + '**2Ce_Compilation with emulated floatin','g point opcodes'#010+ + '**2Cf_Select fpu instruction set to use'#010+ '**2Cg_Generate PIC code'#010+ '**2Ch_ bytes heap (between 1023 and 67107840)'#010+ '**2Ci_IO-checking'#010+ '**2Cn_omit linking stage'#010+ '**2Co_check overflow of integer operations'#010+ '**2Cr_range checking'#010+ - '**2CR_verify object method call validity'#010+ - '**2Cs_set ','stack size to '#010+ + '*','*2CR_verify object method call validity'#010+ + '**2Cs_set stack size to '#010+ '**2Ct_stack checking'#010+ '**2CX_create also smartlinked library'#010+ '**1d_defines the symbol '#010+ '*O1D_generate a DEF file'#010+ '*O2Dd_set description to '#010+ '*O2Dw_PM application'#010+ - '**1e_set path to executable'#010+ + '*','*1e_set path to executable'#010+ '**1E_same as -Cn'#010+ - '**1F_set file names and paths:'#010+ + '**1F_set file names and paths:'#010+ '**2FD_sets the directory where to search for compiler utilities'#010+ '**2Fe_redirect error output to '#010+ '**2FE_set exe/unit output path to '#010+ - '**2Fi_adds to include path'#010+ - '**2Fl_adds to library pat','h'#010+ + '**2Fi_adds',' to include path'#010+ + '**2Fl_adds to library path'#010+ '*L2FL_uses as dynamic linker'#010+ '**2Fo_adds to object path'#010+ '**2Fr_load error message file '#010+ '**2Fu_adds to unit path'#010+ - '**2FU_set unit output path to , overrides -FE'#010+ + '**2FU_set unit output path to , overrides ','-FE'#010+ '*g1g_generate debugger information:'#010+ - '*g2gg_use gsy','m'#010+ + '*g2gg_use gsym'#010+ '*g2gd_use dbx'#010+ '*g2gh_use heap trace unit (for memory leak debugging)'#010+ '*g2gl_use line info unit to show more info for backtraces'#010+ '*g2gc_generate checks for pointers'#010+ - '*g2gv_generates programs tracable with valgrind'#010+ - '*g2gw_generate dwarf debuggin','g info'#010+ + '*g2gv_generates programs',' tracable with valgrind'#010+ + '*g2gw_generate dwarf debugging info'#010+ '**1i_information'#010+ '**2iD_return compiler date'#010+ '**2iV_return compiler version'#010+ '**2iSO_return compiler OS'#010+ '**2iSP_return compiler processor'#010+ '**2iTO_return target OS'#010+ - '**2iTP_return target processor'#010+ + '**2iTP_return target pr','ocessor'#010+ '**1I_adds to include path'#010+ - '**1k_Pass',' to the linker'#010+ + '**1k_Pass to the linker'#010+ '**1l_write logo'#010+ '**1M_set language mode to '#010+ '**2Mfpc_free pascal dialect (default)'#010+ '**2Mobjfpc_switch some Delphi 2 extensions on'#010+ - '**2Mdelphi_tries to be Delphi compatible'#010+ + '**2Mdelphi_tries to be Delphi compa','tible'#010+ '**2Mtp_tries to be TP/BP 7.0 compatible'#010+ - '**2Mgpc','_tries to be gpc compatible'#010+ + '**2Mgpc_tries to be gpc compatible'#010+ '**2Mmacpas_tries to be compatible to the macintosh pascal dialects'#010+ '**1n_don'#039't read the default config file'#010+ - '**1o_change the name of the executable produced to '#010+ - '**1pg_generate profile code for gprof (defines ','FPC_PROFILE)'#010+ + '**1o_change the name of the executable produced t','o '#010+ + '**1pg_generate profile code for gprof (defines FPC_PROFILE)'#010+ '*L1P_use pipes instead of creating temporary assembler files'#010+ '**1S_syntax options:'#010+ '**2S2_same as -Mobjfpc'#010+ '**2Sc_supports operators like C (*=,+=,/= and -=)'#010+ - '**2Sa_include assertion code.'#010+ + '**2Sa_include as','sertion code.'#010+ '**2Sd_same as -Mdelphi'#010+ - '**2Se_compile','r stops after the errors (default is 1)'#010+ + '**2Se_compiler stops after the errors (default is 1)'#010+ '**2Sg_allow LABEL and GOTO'#010+ '**2Sh_Use ansistrings'#010+ '**2Si_support C++ styled INLINE'#010+ '**2Sm_support macros like C (global)'#010+ '**2So_same as -Mtp'#010+ - '**2Sp_same as -Mgpc'#010+ - '**2Ss_constructor name must be init (de','structor must be done)'#010+ + '**2Sp_','same as -Mgpc'#010+ + '**2Ss_constructor name must be init (destructor must be done)'#010+ '**2St_allow static keyword in objects'#010+ '**1s_don'#039't call assembler and linker'#010+ '**2sh_Generate script to link on host'#010+ '**2st_Generate script to link on target'#010+ - '**2sr_Skip register allocation phase (optimizations will be disa','bled'+ + '**2sr_Skip ','register allocation phase (optimizations will be disabled'+ ')'#010+ '**1u_undefines the symbol '#010+ '**1U_unit options:'#010+ '**2Un_don'#039't check the unit name'#010+ '**2Ur_generate release unit files'#010+ '**2Us_compile a system unit'#010+ - '**1v_Be verbose. is a combination of the following letters:'#010+ - '**2*_e : Show errors ','(default) d : Show debug info'#010+ + '**1v_Be verbose. is a combin','ation of the following letters:'#010+ + '**2*_e : Show errors (default) d : Show debug info'#010+ '**2*_w : Show warnings u : Show unit info'#010+ '**2*_n : Show notes t : Show tried/used files'#010+ - '**2*_h : Show hints m : Show defined macros'#010+ - '**2*_i : Show general in','fo p : Show compiled procedures'#010+ + '**2*_h : Show hints ',' m : Show defined macros'#010+ + '**2*_i : Show general info p : Show compiled procedures'#010+ '**2*_l : Show linenumbers c : Show conditionals'#010+ '**2*_a : Show everything 0 : Show nothing (except errors)'#010+ - '**2*_b : Show all procedure r : Rhide/GCC compatibility mode', - #010+ + '**2*_b : Show al','l procedure r : Rhide/GCC compatibility mod'+ + 'e'#010+ '**2*_ declarations if an error x : Executable info (Win32 only)'#010+ '**2*_ occurs'#010+ '**1V_write fpcdebug.txt file with lots of debugging info'#010+ '**1X_executable options:'#010+ - '*L2Xc_link with the c library'#010+ + '*L2Xc_link with th','e c library'#010+ '**2Xs_strip all symbols from executable'#010+ - '*','*2XD_try to link dynamic (defines FPC_LINK_DYNAMIC)'#010+ + '**2XD_try to link dynamic (defines FPC_LINK_DYNAMIC)'#010+ '**2XP_prepend the binutils names with the prefix '#010+ '**2XS_try to link static (default) (defines FPC_LINK_STATIC)'#010+ - '**2XX_try to link smart (defines FPC_LINK_SMART)'#010+ - '**','0*_Processor specific options:'#010+ + '**2XX_try',' to link smart (defines FPC_LINK_SMART)'#010+ + '**0*_Processor specific options:'#010+ '3*1A_output format:'#010+ '3*2Aas_assemble using GNU AS'#010+ '3*2Anasmcoff_coff (Go32v2) file using Nasm'#010+ '3*2Anasmelf_elf32 (Linux) file using Nasm'#010+ - '3*2Awasm_obj file using Wasm (Watcom)'#010+ + '3*2Awasm_obj file u','sing Wasm (Watcom)'#010+ '3*2Anasmobj_obj file using Nasm'#010+ - '3*','2Amasm_obj file using Masm (Microsoft)'#010+ + '3*2Amasm_obj file using Masm (Microsoft)'#010+ '3*2Atasm_obj file using Tasm (Borland)'#010+ '3*2Acoff_coff (Go32v2) using internal writer'#010+ '3*2Apecoff_pecoff (Win32) using internal writer'#010+ - '3*1R_assembler reading style:'#010+ + '3*1R_assemble','r reading style:'#010+ '3*2Ratt_read AT&T style assembler'#010+ - '3*','2Rintel_read Intel style assembler'#010+ + '3*2Rintel_read Intel style assembler'#010+ '3*2Rdirect_copy assembler text directly to assembler file'#010+ '3*1O_optimizations:'#010+ '3*2Og_generate smaller code'#010+ '3*2OG_generate faster code (default)'#010+ - '3*2Or_keep certain variables in registers'#010+ - '3*2Ou_enable unce','rtain optimizations (see docs)'#010+ + '3*2Or_','keep certain variables in registers'#010+ + '3*2Ou_enable uncertain optimizations (see docs)'#010+ '3*2O1_level 1 optimizations (quick optimizations)'#010+ '3*2O2_level 2 optimizations (-O1 + slower optimizations)'#010+ - '3*2O3_level 3 optimizations (-O2 repeatedly, max 5 times)'#010+ + '3*2O3_level 3 optimizations (-O2 repeatedly, max ','5 times)'#010+ '3*2Op_target processor:'#010+ - '3*3Op1_set target',' processor to 386/486'#010+ + '3*3Op1_set target processor to 386/486'#010+ '3*3Op2_set target processor to Pentium/PentiumMMX (tm)'#010+ '3*3Op3_set target processor to PPro/PII/c6x86/K6 (tm)'#010+ '3*1T_Target operating system:'#010+ - '3*2Temx_OS/2 via EMX (including EMX/RSX extender)'#010+ - '3*2Tgo32v2_Version 2 of DJ',' Delorie DOS extender'#010+ + '3*2Temx_OS/2 via EMX (i','ncluding EMX/RSX extender)'#010+ + '3*2Tgo32v2_Version 2 of DJ Delorie DOS extender'#010+ '3*2Tlinux_Linux'#010+ '3*2Tnetware_Novell Netware Module (clib)'#010+ '3*2Tnetwlibc_Novell Netware Module (libc)'#010+ '3*2Tos2_OS/2 / eComStation'#010+ '3*2Tsunos_SunOS/Solaris'#010+ - '3*2Twatcom_Watcom compatible DOS extender'#010+ - '3*2Twdosx_WDOSX DOS extend','er'#010+ + '3*2Twatcom_Watc','om compatible DOS extender'#010+ + '3*2Twdosx_WDOSX DOS extender'#010+ '3*2Twin32_Windows 32 Bit'#010+ '3*1W_Win32-like target options'#010+ '3*2WB_Set Image base to Hexadecimal value'#010+ '3*2WC_Specify console type application'#010+ - '3*2WD_Use DEFFILE to export functions of DLL or EXE'#010+ - '3*2WF_Specify full-screen type applica','tion (OS/2 only)'#010+ + '3*2WD_Use DEFFILE to export functions',' of DLL or EXE'#010+ + '3*2WF_Specify full-screen type application (OS/2 only)'#010+ '3*2WG_Specify graphic type application'#010+ '3*2WN_Do not generate relocation code (necessary for debugging)'#010+ '3*2WR_Generate relocation code'#010+ '6*1A_output format'#010+ - '6*2Aas_Unix o-file using GNU AS'#010+ + '6*2Aas_Unix o-','file using GNU AS'#010+ '6*2Agas_GNU Motorola assembler'#010+ - '6*2A','mit_MIT Syntax (old GAS)'#010+ + '6*2Amit_MIT Syntax (old GAS)'#010+ '6*2Amot_Standard Motorola assembler'#010+ '6*1O_optimizations:'#010+ '6*2Oa_turn on the optimizer'#010+ '6*2Og_generate smaller code'#010+ '6*2OG_generate faster code (default)'#010+ - '6*2Ox_optimize maximum (still BUGGY!!!)'#010+ - '6*2O0_set target processor',' to a MC68000'#010+ + '6*2Ox_optimiz','e maximum (still BUGGY!!!)'#010+ + '6*2O0_set target processor to a MC68000'#010+ '6*2O2_set target processor to a MC68020+ (default)'#010+ '6*1R_assembler reading style:'#010+ '6*2RMOT_read motorola style assembler'#010+ '6*1T_Target operating system:'#010+ - '6*2Tamiga_Commodore Amiga'#010+ + '6*2Tamiga_Commodor','e Amiga'#010+ '6*2Tatari_Atari ST/STe/TT'#010+ - '6*2Tlinux_Linux-68k',#010+ + '6*2Tlinux_Linux-68k'#010+ '6*2Tmacos_Macintosh m68k (not supported)'#010+ '6*2Tpalmos_PalmOS'#010+ 'P*1T_Target operating system:'#010+ 'P*2Tdarwin_Darwin and MacOS X on PowerPC'#010+ 'P*2Tlinux_Linux on PowerPC'#010+ - 'P*2Tmacos_MacOS (classic) on PowerPC'#010+ + 'P*2Tmacos_MacOS (classic) ','on PowerPC'#010+ 'P*2Tmorphos_MorphOS'#010+ - 'P*2WC_Specify console ','type application (MacOS only)'#010+ + 'P*2WC_Specify console type application (MacOS only)'#010+ 'P*2WG_Specify graphic type application (MacOS only)'#010+ 'P*2WT_Specify tool type application (MPW tool, MacOS only)'#010+ '**1*_'#010+ '**1?_shows this help'#010+ - '**1h_shows this help without waiting'#000 + '**1h_shows this hel','p without waiting'#000 ); diff --git a/compiler/nflw.pas b/compiler/nflw.pas index 6c08a5c054..4e6a7ce3d4 100644 --- a/compiler/nflw.pas +++ b/compiler/nflw.pas @@ -692,13 +692,6 @@ implementation result:=nil; resulttype:=voidtype; - - if left.nodetype<>assignn then - begin - CGMessage(parser_e_illegal_expression); - exit; - end; - {Can we spare the first comparision?} if (right.nodetype=ordconstn) and (Tassignmentnode(left).right.nodetype=ordconstn) and @@ -733,42 +726,6 @@ implementation if codegenerror then exit; - { Check count var, record fields are also allowed in tp7 } - hp:=t2; - while (hp.nodetype=subscriptn) or - ((hp.nodetype=vecn) and - is_constintnode(tvecnode(hp).right)) or - ((hp.nodetype=typeconvn) and - (ttypeconvnode(hp).convtype=tc_equal)) do - hp:=tunarynode(hp).left; - { we need a simple loadn, but the load must be in a global symtable or - in the same level as the para of the current proc } - if ( - (hp.nodetype=loadn) and - ( - (tloadnode(hp).symtable.symtablelevel=main_program_level) or - (tloadnode(hp).symtable.symtablelevel=current_procinfo.procdef.parast.symtablelevel) - ) and - not( - (tloadnode(hp).symtableentry.typ=varsym) and - ((tvarsym(tloadnode(hp).symtableentry).varspez in [vs_var,vs_out]) or - (vo_is_thread_var in tvarsym(tloadnode(hp).symtableentry).varoptions)) - ) - ) then - begin - if (hp.nodetype=loadn) and - (tloadnode(hp).symtableentry.typ=varsym) then - tvarsym(tloadnode(hp).symtableentry).varstate:=vs_used; - if not(is_ordinal(t2.resulttype.def)) -{$ifndef cpu64bit} - or is_64bitint(t2.resulttype.def) -{$endif cpu64bit} - then - CGMessagePos(hp.fileinfo,type_e_ordinal_expr_expected); - end - else - CGMessagePos(hp.fileinfo,type_e_illegal_count_var); - resulttypepass(right); set_varstate(right,vs_used,true); inserttypeconv(right,t2.resulttype); @@ -777,10 +734,7 @@ implementation function tfornode.pass_1 : tnode; var - old_t_times : longint; - {$ifdef loopvar_dont_mind} - hp : Tnode; - {$endif loopvar_dont_mind} + old_t_times : longint; begin result:=nil; expectloc:=LOC_VOID; @@ -797,6 +751,7 @@ implementation if codegenerror then exit; end; + registersint:=t1.registersint; registersfpu:=t1.registersfpu; {$ifdef SUPPORT_MMX} @@ -1474,7 +1429,10 @@ begin end. { $Log$ - Revision 1.99 2004-08-30 12:09:45 michael + Revision 1.100 2004-09-13 20:28:26 peter + * for loop variable assignment is not allowed anymore + + Revision 1.99 2004/08/30 12:09:45 michael + Patch from peter to fix bug 3272 Revision 1.98 2004/06/20 08:55:29 florian diff --git a/compiler/pstatmnt.pas b/compiler/pstatmnt.pas index 1a7aa99583..18cc3f37f7 100644 --- a/compiler/pstatmnt.pas +++ b/compiler/pstatmnt.pas @@ -41,10 +41,10 @@ implementation uses { common } - cutils,cclasses, + cutils, { global } globtype,globals,verbose, - systems,cpuinfo, + systems, { aasm } cpubase,aasmbase,aasmtai, { symtable } @@ -343,11 +343,82 @@ implementation var p_e,tovalue,p_a : tnode; backward : boolean; - + loopvarsym : tvarsym; + hp : tnode; begin { parse loop header } consume(_FOR); p_e:=expr; + + { Check loop variable } + hp:=nil; + loopvarsym:=nil; + if (p_e.nodetype=assignn) then + begin + hp:=tassignmentnode(p_e).left; + + { variable must be an ordinal, int64 is not allowed for 32bit targets } + if not(is_ordinal(hp.resulttype.def)) +{$ifndef cpu64bit} + or is_64bitint(hp.resulttype.def) +{$endif cpu64bit} + then + MessagePos(hp.fileinfo,type_e_ordinal_expr_expected); + + { record fields are also allowed in tp7 } + while assigned(hp) and + ( + (hp.nodetype=subscriptn) or + ((hp.nodetype=vecn) and + is_constintnode(tvecnode(hp).right)) or + ((hp.nodetype=typeconvn) and + (ttypeconvnode(hp).convtype=tc_equal)) + ) do + hp:=tunarynode(hp).left; + end; + if assigned(hp) and + (hp.nodetype=loadn) then + begin + case tloadnode(hp).symtableentry.typ of + varsym : + begin + { we need a simple loadn and the load must be in a global symtable or + in the same level as the para of the current proc } + if ( + (tloadnode(hp).symtable.symtablelevel=main_program_level) or + (tloadnode(hp).symtable.symtablelevel=current_procinfo.procdef.parast.symtablelevel) + ) and + not( + (tloadnode(hp).symtableentry.typ=varsym) and + ((tvarsym(tloadnode(hp).symtableentry).varspez in [vs_var,vs_out]) or + (vo_is_thread_var in tvarsym(tloadnode(hp).symtableentry).varoptions)) + ) then + begin + tvarsym(tloadnode(hp).symtableentry).varstate:=vs_used; + + { Assigning for-loop variable is only allowed in tp7 } + if not(m_tp7 in aktmodeswitches) then + begin + loopvarsym:=tvarsym(tloadnode(hp).symtableentry); + include(loopvarsym.varoptions,vo_is_loop_counter); + end; + end + else + MessagePos(hp.fileinfo,type_e_illegal_count_var); + end; + typedconstsym : + begin + { Bad programming, only allowed in tp7 mode } + if not(m_tp7 in aktmodeswitches) then + MessagePos(hp.fileinfo,type_e_illegal_count_var); + end; + else + MessagePos(hp.fileinfo,type_e_illegal_count_var); + end; + end + else + Message(parser_e_illegal_expression); + if token=_DOWNTO then begin consume(_DOWNTO); @@ -361,8 +432,13 @@ implementation tovalue:=comp_expr(true); consume(_DO); - { ... now the instruction } + { ... now the instruction block } p_a:=statement; + + { variable is not used a loop counter anymore } + if assigned(loopvarsym) then + exclude(loopvarsym.varoptions,vo_is_loop_counter); + for_statement:=genloopnode(forn,p_e,tovalue,p_a,backward); end; @@ -1106,7 +1182,10 @@ implementation end. { $Log$ - Revision 1.136 2004-06-20 08:55:30 florian + Revision 1.137 2004-09-13 20:28:27 peter + * for loop variable assignment is not allowed anymore + + Revision 1.136 2004/06/20 08:55:30 florian * logs truncated Revision 1.135 2004/06/16 20:07:09 florian