From 71ae948727101eae8bf8bcdacde87c5cca74ba64 Mon Sep 17 00:00:00 2001 From: florian Date: Sun, 2 May 1999 09:35:39 +0000 Subject: [PATCH] + method message handlers which contain an explicit self can't be called directly anymore + self is now loaded at the start of the an message handler with an explicit self + $useoverlay fixed: i386 was renamed to i386base --- compiler/msgidx.inc | 1 + compiler/msgtxt.inc | 219 ++++++++++++++++++++++---------------------- compiler/pp.pas | 11 ++- compiler/tccal.pas | 13 ++- 4 files changed, 132 insertions(+), 112 deletions(-) diff --git a/compiler/msgidx.inc b/compiler/msgidx.inc index d0f31d96a6..fdde1205a2 100644 --- a/compiler/msgidx.inc +++ b/compiler/msgidx.inc @@ -284,6 +284,7 @@ type tmsgconst=( cg_e_include_not_implemented, cg_w_may_wrong_math_argument, cg_e_cannot_call_cons_dest_inside_with, + cg_e_cannot_call_message_direct, assem_f_ev_zero_divide, assem_f_ev_stack_overflow, assem_f_ev_stack_underflow, diff --git a/compiler/msgtxt.inc b/compiler/msgtxt.inc index 15bf6acdb7..f12fbe4796 100644 --- a/compiler/msgtxt.inc +++ b/compiler/msgtxt.inc @@ -296,390 +296,391 @@ const msgtxt : array[0..00103,1..240] of char=( ' use (set)length instead'#000+ 'E_Include or exclude not implemented in this case'#000+ 'W_Probably illegal constant passed to internal math function'#000+ - 'Constructors or destructors can not be called inside ','with here'#000+ + 'E_Constructors or destructors can not be called insid','e with here'#000+ + 'E_Cannot call message handler method directly'#000+ 'F_Divide by zero in asm evaluator'#000+ 'F_Evaluator stack overflow'#000+ 'F_Evaluator stack underflow'#000+ 'F_Invalid numeric format in asm evaluator'#000+ 'F_Invalid Operator in asm evaluator'#000+ - 'F_Unknown error in asm evaluator'#000+ + 'F_Unknown error',' in asm evaluator'#000+ 'W_Invalid numeric value'#000+ - 'E_esca','pe sequence ignored: $1'#000+ + 'E_escape sequence ignored: $1'#000+ 'E_Asm syntax error - Prefix not found'#000+ 'E_Asm syntax error - Trying to add more than one prefix'#000+ 'E_Asm syntax error - Opcode not found'#000+ 'E_Invalid symbol reference'#000+ - 'W_Calling an overload function in an asm'#000+ - 'E_Constant value',' out of bounds'#000+ + 'W_Calling',' an overload function in an asm'#000+ + 'E_Constant value out of bounds'#000+ 'E_Non-label pattern contains @'#000+ 'E_Invalid Operand: $1'#000+ 'W_Override operator not supported'#000+ 'E_Error in binary constant: $1'#000+ 'E_Error in octal constant: $1'#000+ - 'E_Error in hexadecimal constant: $1'#000+ + 'E_Error in hexadecimal consta','nt: $1'#000+ 'E_Error in integer constant: $1'#000+ - 'E_Invalid',' labeled opcode'#000+ + 'E_Invalid labeled opcode'#000+ 'F_Internal error in Findtype()'#000+ 'E_Invalid size for MOVSX/MOVZX'#000+ 'E_16-bit base in 32-bit segment'#000+ 'E_16-bit index in 32-bit segment'#000+ 'E_Invalid Opcode'#000+ - 'E_Constant reference not allowed'#000+ - 'W_Fwait can cause emulation problems with emu38','7'#000+ + 'E_Constant reference not allowed',#000+ + 'W_Fwait can cause emulation problems with emu387'#000+ 'E_Invalid combination of opcode and operands'#000+ 'E_Unsupported combination of opcode and operands'#000+ 'W_Opcode $1 not in table, operands not checked'#000+ 'F_Internal Error in ConcatOpcode()'#000+ - 'E_Invalid size in reference'#000+ + 'E_Invalid size',' in reference'#000+ 'E_Invalid middle sized operand'#000+ - 'E_I','nvalid three operand opcode'#000+ + 'E_Invalid three operand opcode'#000+ 'E_Assembler syntax error'#000+ 'E_Invalid operand type'#000+ 'E_Segment overrides not supported'#000+ 'E_Invalid constant symbol $1'#000+ 'F_Internal Errror converting binary'#000+ - 'F_Internal Errror converting hexadecimal'#000+ - 'F_Internal Errror conver','ting octal'#000+ + 'F_Internal Errror',' converting hexadecimal'#000+ + 'F_Internal Errror converting octal'#000+ 'E_Invalid constant expression'#000+ 'E_Unknown identifier: $1'#000+ 'E_Trying to define an index register more than once'#000+ 'E_Invalid field specifier'#000+ 'F_Internal Error in BuildScaling()'#000+ - 'E_Invalid scaling factor'#000+ + 'E_Invalid sca','ling factor'#000+ 'E_Invalid scaling value'#000+ - 'E_Scaling va','lue only allowed with index'#000+ + 'E_Scaling value only allowed with index'#000+ 'E_Invalid assembler syntax. No ref with brackets)'#000+ 'E_Expressions of the form [sreg:reg...] are currently not supported'#000+ 'E_Trying to define a segment register twice'#000+ - 'E_Trying to define a base register twice'#000+ - 'E_Trying ','to use a negative index register'#000+ + 'E_','Trying to define a base register twice'#000+ + 'E_Trying to use a negative index register'#000+ 'E_Asm syntax error - error in reference'#000+ 'E_Local symbols not allowed as references'#000+ 'E_Invalid operand in bracket expression'#000+ 'E_Invalid symbol name: $1'#000+ - 'E_Invalid Reference syntax'#000+ - 'E_Invalid string as opcode opera','nd: $1'#000+ + 'E_Invalid R','eference syntax'#000+ + 'E_Invalid string as opcode operand: $1'#000+ 'W_@CODE and @DATA not supported'#000+ 'E_Null label references are not allowed'#000+ 'W_Calling of an overloaded function in direct assembler'#000+ 'E_Cannot use SELF outside a method'#000+ - 'E_Asm syntax error - Should start with bracket'#000+ - 'E_Asm syntax error - re','gister: $1'#000+ + 'E_Asm syntax error - S','hould start with bracket'#000+ + 'E_Asm syntax error - register: $1'#000+ 'E_SEG and OFFSET not supported'#000+ 'E_Asm syntax error - in opcode operand'#000+ 'E_Invalid String expression'#000+ 'E_Constant expression out of bounds'#000+ 'F_Internal Error in BuildConstant()'#000+ - 'W_A repeat prefix and a segment override on <= i386 may res','ult in er'+ + 'W_A repeat ','prefix and a segment override on <= i386 may result in er'+ 'rors if an interrupt occurs'#000+ 'E_Invalid or missing opcode'#000+ 'E_Invalid combination of prefix and opcode: $1'#000+ 'E_Invalid combination of override and opcode: $1'#000+ 'E_Too many operands on line'#000+ - 'E_Duplicate local symbol: $1'#000+ - 'E_Unknown label identi','fer: $1'#000+ + 'E_D','uplicate local symbol: $1'#000+ + 'E_Unknown label identifer: $1'#000+ 'E_Assemble node syntax error'#000+ 'E_Undefined local symbol: $1'#000+ 'D_Starting intel styled assembler parsing...'#000+ 'D_Finished intel styled assembler parsing...'#000+ - 'E_Not a directive or local symbol: $1'#000+ + 'E_Not a directive or local symbol: $','1'#000+ 'E_/ at beginning of line not allowed'#000+ - 'E_NOR not',' supported'#000+ + 'E_NOR not supported'#000+ 'E_Invalid floating point register name'#000+ 'W_Modulo not supported'#000+ 'E_Invalid floating point constant: $1'#000+ 'E_Size suffix and destination register do not match'#000+ - 'E_Size suffix and destination or source size do not match'#000+ - 'W_Size suffix and d','estination or source size do not match'#000+ + 'E_Size suffix and destination',' or source size do not match'#000+ + 'W_Size suffix and destination or source size do not match'#000+ 'E_Internal error in ConcatLabeledInstr()'#000+ 'W_Floating point binary representation ignored'#000+ 'W_Floating point hexadecimal representation ignored'#000+ - 'W_Floating point octal representation ignored'#000+ - 'E_Invalid real ','constant expression'#000+ + 'W_Floating po','int octal representation ignored'#000+ + 'E_Invalid real constant expression'#000+ 'E_Parenthesis are not allowed'#000+ 'E_Invalid Reference'#000+ 'E_Cannot use __SELF outside a method'#000+ 'E_Cannot use __OLDEBP outside a nested procedure'#000+ 'W_Identifier $1 supposed external'#000+ - 'E_Invalid segment override expression'#000+ - 'E_Strings no','t allowed as constants'#000+ + 'E_','Invalid segment override expression'#000+ + 'E_Strings not allowed as constants'#000+ 'D_Starting AT&T styled assembler parsing...'#000+ 'D_Finished AT&T styled assembler parsing...'#000+ 'E_Switching sections is not allowed in an assembler block'#000+ - 'E_Invalid global definition'#000+ + 'E_Invalid global defini','tion'#000+ 'E_Line separator expected'#000+ - 'W_globl not suppo','rted'#000+ + 'W_globl not supported'#000+ 'W_align not supported'#000+ 'W_lcomm not supported'#000+ 'W_comm not supported'#000+ 'E_Invalid local common definition'#000+ 'E_Invalid global common definition'#000+ 'E_local symbol: $1 not found inside asm statement'#000+ - 'E_assembler code not returned to text'#000+ - 'F_internal er','ror in BuildReference()'#000+ + 'E_a','ssembler code not returned to text'#000+ + 'F_internal error in BuildReference()'#000+ 'E_invalid opcode size'#000+ 'W_NEAR ignored'#000+ 'W_FAR ignored'#000+ 'D_Creating inline asm lookup tables'#000+ 'E_Using a defined name as a local label'#000+ 'F_internal error in HandleExtend()'#000+ - 'E_Invalid character: <'#000+ + 'E_Inva','lid character: <'#000+ 'E_Invalid character: >'#000+ - 'E_Unsupp','orted opcode'#000+ + 'E_Unsupported opcode'#000+ 'E_Increment and Decrement mode not allowed together'#000+ 'E_Invalid Register list in movem/fmovem'#000+ 'E_Invalid Register list for opcode'#000+ 'E_68020+ mode required to assemble'#000+ - 'D_Starting Motorola styled assembler parsing...'#000+ - 'D_Finished Motoro','la styled assembler parsing...'#000+ + 'D_Starting Motoro','la styled assembler parsing...'#000+ + 'D_Finished Motorola styled assembler parsing...'#000+ 'W_XDEF not supported'#000+ 'W_Functions with void return value can'#039't return any value in asm c'+ 'ode'#000+ 'E_Invalid suffix for intel assembler'#000+ - 'E_Extended not supported in this mode'#000+ + 'E_Extended not supported in this ','mode'#000+ 'E_Comp not supported in this mode'#000+ - 'W_You nee','d GNU as version >= 2.81 to compile this MMX code'#000+ + 'W_You need GNU as version >= 2.81 to compile this MMX code'#000+ 'F_Too many assembler files'#000+ 'F_Selected assembler output not supported'#000+ 'E_Unsupported symbol type for operand'#000+ - 'E_Cannot index a local var or parameter with a register'#000+ + 'E_Cannot index a local var or param','eter with a register'#000+ 'H_$1 translated to $2'#000+ - 'W_$1 ','is associated to an overloaded function'#000+ + 'W_$1 is associated to an overloaded function'#000+ 'Z_Reference at $1 corresponds to $2 arg'#000+ 'Z_Reference at $1 is not an arg !'#000+ 'W_Source operating system redefined'#000+ 'I_Assembling (pipe) $1'#000+ - 'E_Can'#039't create assember file $1'#000+ - 'W_Assembler $1 not found, switching',' to external assembling'#000+ + 'E_Can'#039't create asse','mber file $1'#000+ + 'W_Assembler $1 not found, switching to external assembling'#000+ 'T_Using assembler: $1'#000+ 'W_Error while assembling exitcode $1'#000+ 'W_Can'#039't call the assembler, error $1 switching to external assembl'+ 'ing'#000+ 'I_Assembling $1'#000+ - 'W_Linker $1 not found, switching to external linking'#000+ - 'T_Using linker: $1',#000+ + 'W_Linker $1 not found, ','switching to external linking'#000+ + 'T_Using linker: $1'#000+ 'W_Object $1 not found, Linking may fail !'#000+ 'W_Library $1 not found, Linking may fail !'#000+ 'W_Error while linking'#000+ 'W_Can'#039't call the linker, switching to external linking'#000+ 'I_Linking $1'#000+ - 'W_binder not found, switching to external binding'#000+ - 'W_ar not found',', switching to external ar'#000+ + 'W_binder not fou','nd, switching to external binding'#000+ + 'W_ar not found, switching to external ar'#000+ 'E_Dynamic Libraries not supported'#000+ 'I_Closing script $1'#000+ 'W_resource compiler not found, switching to external mode'#000+ 'I_Compiling resource $1'#000+ - 'F_Can'#039't post process executable $1'#000+ + 'F_Can'#039't post process executab','le $1'#000+ 'F_Can'#039't open executable $1'#000+ - 'X_Size of Code:',' $1 bytes'#000+ + 'X_Size of Code: $1 bytes'#000+ 'X_Size of initialized data: $1 bytes'#000+ 'X_Size of uninitialized data: $1 bytes'#000+ 'X_Stack space reserved: $1 bytes'#000+ 'X_Stack space commited: $1 bytes'#000+ 'T_Unitsearch: $1'#000+ 'T_PPU Loading $1'#000+ - 'U_PPU Name: $1'#000+ + 'U_PPU ','Name: $1'#000+ 'U_PPU Flags: $1'#000+ 'U_PPU Crc: $1'#000+ - 'U_PPU Tim','e: $1'#000+ + 'U_PPU Time: $1'#000+ 'U_PPU File too short'#000+ 'U_PPU Invalid Header (no PPU at the begin)'#000+ 'U_PPU Invalid Version $1'#000+ 'U_PPU is compiled for an other processor'#000+ 'U_PPU is compiled for an other target'#000+ 'U_PPU Source: $1'#000+ - 'U_Writing $1'#000+ + 'U','_Writing $1'#000+ 'F_Can'#039't Write PPU-File'#000+ - 'F_reading PPU','-File'#000+ + 'F_reading PPU-File'#000+ 'F_unexpected end of PPU-File'#000+ 'F_Invalid PPU-File entry: $1'#000+ 'F_PPU Dbx count problem'#000+ 'E_Illegal unit name: $1'#000+ 'F_Too much units'#000+ 'F_Circular unit reference between $1 and $2'#000+ - 'F_Can'#039't compile unit $1, no sources available'#000+ - 'W_Compiling the syste','m unit requires the -Us switch'#000+ + 'F_Can'#039't compile uni','t $1, no sources available'#000+ + 'W_Compiling the system unit requires the -Us switch'#000+ 'F_There were $1 errors compiling module, stopping'#000+ 'U_Load from $1 ($2) unit $3'#000+ 'U_Recompiling $1, checksum changed for $2'#000+ 'U_Recompiling $1, source found only'#000+ - 'U_Recompiling unit, static lib is older than ppufile'#000,+ + 'U_Rec','ompiling unit, static lib is older than ppufile'#000+ 'U_Recompiling unit, shared lib is older than ppufile'#000+ 'U_Recompiling unit, obj and asm are older than ppufile'#000+ 'U_Recompiling unit, obj is older than asm'#000+ 'U_Parsing interface of $1'#000+ - 'U_Parsing implementation of $1'#000+ + 'U_Parsing implem','entation of $1'#000+ 'U_Second load for unit $1'#000+ - 'U_PPU C','heck file $1 time $2'#000+ + 'U_PPU Check file $1 time $2'#000+ '$1 [options] [options]'#000+ 'W_Only one source file supported'#000+ 'W_DEF file can be created only for OS/2'#000+ 'E_nested response files are not supported'#000+ - 'F_No source file name in command line'#000+ + 'F_No source file name',' in command line'#000+ 'E_Illegal parameter: $1'#000+ - 'H_-? wr','ites help pages'#000+ + 'H_-? writes help pages'#000+ 'F_Too many config files nested'#000+ 'F_Unable to open file $1'#000+ 'N_Reading further options from $1'#000+ 'W_Target is already set to: $1'#000+ - 'W_Shared libs not supported on DOS platform, reverting to static'#000+ + 'W_Shared libs not supported on DOS platform, reverting ','to static'#000+ 'F_too many IF(N)DEFs'#000+ - 'F_too many ENDIFs',#000+ + 'F_too many ENDIFs'#000+ 'F_open conditional at the end of the file'#000+ 'W_Debug information generation is not supported by this executable'#000+ 'H_Try recompiling with -dGDB'#000+ 'W_You are using the obsolete switch $1'#000+ - 'Free Pascal Compiler version $FPCVER [$FPCDATE] for $FPCTARGET',#000+ + 'Free Pascal Co','mpiler version $FPCVER [$FPCDATE] for $FPCTARGET'#000+ 'Copyright (c) 1993-98 by Florian Klaempfl'#000+ 'Free Pascal Compiler version $FPCVER'#000+ #000+ 'Compiler Date : $FPCDATE'#000+ 'Compiler Target: $FPCTARGET'#000+ #000+ - 'This program comes under the GNU General Public Licence'#000+ + 'This program comes under the GNU General Public Licence'#000,+ 'For more information read COPYING.FPC'#000+ #000+ - 'Report bu','gs,suggestions etc to:'#000+ + 'Report bugs,suggestions etc to:'#000+ ' fpc-devel@vekoll.saturnus.vein.hu'#000+ '**0*_put + after a boolean switch option to enable it, - to disable it'+ #000+ - '**1a_the compiler doesn'#039't delete the generated assembler file'#000+ - '**2al_list sourcecode lines in as','sembler file'#000+ + '**1a_the compiler doesn'#039't delete the generated ','assembler file'#000+ + '**2al_list sourcecode lines in assembler file'#000+ '**1b_generate browser info'#000+ '**2bl_generate local symbol info'#000+ '**1B_build all modules'#000+ '**1C_code generation options'#000+ '3*2CD_create dynamic library'#000+ - '**2Ch_ bytes heap (between 1023 and 67107840)'#000+ + '**2Ch_ bytes heap (between 1023 ','and 67107840)'#000+ '**2Ci_IO-checking'#000+ - '**2Cn_omit linki','ng stage'#000+ + '**2Cn_omit linking stage'#000+ '**2Co_check overflow of integer operations'#000+ '**2Cr_range checking'#000+ '**2Cs_set stack size to '#000+ '**2Ct_stack checking'#000+ '3*2CS_create static library'#000+ '3*2Cx_use smartlinking'#000+ - '**1d_defines the symbol '#000+ + '**1d_defines ','the symbol '#000+ '*O1D_generate a DEF file'#000+ - '*O2Dd','_set description to '#000+ + '*O2Dd_set description to '#000+ '*O2Dw_PM application'#000+ '**1e_set path to executable'#000+ '**1E_same as -Cn'#000+ '**1F_set file names and paths'#000+ '**2FD_sets the directory where to search for compiler utilities'#000+ - '**2Fe_redirect error output to '#000+ - '**2FE_set',' exe/unit output path to '#000+ + '**','2Fe_redirect error output to '#000+ + '**2FE_set exe/unit output path to '#000+ '*L2Fg_same as -Fl'#000+ '**2Fi_adds to include path'#000+ '**2Fl_adds to library path'#000+ '*L2FL_uses as dynamic linker'#000+ '**2Fo_adds to object path'#000+ - '**2Fr_load error message file '#000+ - '**2Fu_adds to unit path'#000+ + '**2Fr','_load error message file '#000+ + '**2Fu_adds to unit path'#000+ '**2FU_set unit output path to , overrides -FE'#000+ '*g1g_generate debugger information'#000+ '*g2gg_use gsym'#000+ '*g2gd_use dbx'#000+ '*g2gh_use heap trace unit'#000+ '**1i_information'#000+ - '**2iD_return compiler date'#000+ + '**2iD_return compi','ler date'#000+ '**2iV_return compiler version'#000+ - '**2iSO_re','turn source OS'#000+ + '**2iSO_return source OS'#000+ '**2iSP_return source processor'#000+ '**2iTO_return target OS'#000+ '**2iTP_return target processor'#000+ '**1I_adds to include path'#000+ '**1k_Pass to the linker'#000+ '**1l_write logo'#000+ - '**1n_don'#039't read the default config file'#000+ - '**1o_change the ','name of the executable produced to '#000+ + '**1n_don'#039't ','read the default config file'#000+ + '**1o_change the name of the executable produced to '#000+ '**1pg_generate profile code for gprof'#000+ '*L1P_use pipes instead of creating temporary assembler files'#000+ '**1S_syntax options'#000+ - '**2S2_switch some Delphi 2 extensions on'#000+ - '**2Sc_supports operators like C (*=,+=,/=',' and -=)'#000+ + '**2S2_switch some Delphi 2 extensi','ons on'#000+ + '**2Sc_supports operators like C (*=,+=,/= and -=)'#000+ '**2Sd_tries to be Delphi compatible'#000+ '**2Se_compiler stops after the first error'#000+ '**2Sg_allow LABEL and GOTO'#000+ '**2Sh_Use ansistrings'#000+ '**2Si_support C++ stlyed INLINE'#000+ - '**2Sm_support macros like C (global)'#000+ - '**2So_tries to be TP/BP 7.0 compat','ible'#000+ + '**2Sm_support macros li','ke C (global)'#000+ + '**2So_tries to be TP/BP 7.0 compatible'#000+ '**2Sp_tries to be gpc compatible'#000+ '**2Ss_constructor name must be init (destructor must be done)'#000+ '**2St_allow static keyword in objects'#000+ '**1s_don'#039't call assembler and linker (only with -a)'#000+ - '**1u_undefines the symbol '#000+ - '**1U_unit options',#000+ + '**','1u_undefines the symbol '#000+ + '**1U_unit options'#000+ '**2Un_don'#039't check the unit name'#000+ '**2Up_same as -Fu'#000+ '**2Us_compile a system unit'#000+ '**1v_Be verbose. is a combination of the following letters :'#000+ - '**2*_e : Show errors (default) d : Show debug info'#000+ - '**2*_w : Show warnings ',' u : Show unit info'#000+ + '**2*_e : Show errors (default) d ',': Show debug info'#000+ + '**2*_w : Show warnings u : Show unit info'#000+ '**2*_n : Show notes t : Show tried/used files'#000+ '**2*_h : Show hints m : Show defined macros'#000+ - '**2*_i : Show general info p : Show compiled procedures'#000+ - '**2*_l : Show linenumber','s c : Show conditionals'#000+ + '**2*_i : Show general info p : S','how compiled procedures'#000+ + '**2*_l : Show linenumbers c : Show conditionals'#000+ '**2*_a : Show everything 0 : Show nothing (except errors)'#000+ '**2*_b : Show all procedure r : Rhide/GCC compatibility mode'#000+ - '**2*_ declarations if an error x : Executable info (Win32 o','nly'+ + '**2*_ declarat','ions if an error x : Executable info (Win32 only'+ ')'#000+ '**2*_ occurs'#000+ '**1X_executable options'#000+ '*L2Xc_link with the c library'#000+ '**2XD_link with dynamic libraries (defines FPC_LINK_DYNAMIC)'#000+ '**2Xs_strip all symbols from executable'#000+ - '**2XS_link with static libraries (defines FPC_LINK_STATIC)'#000+ - '**0*_','Processor specific options:'#000+ + '**2XS_link with ','static libraries (defines FPC_LINK_STATIC)'#000+ + '**0*_Processor specific options:'#000+ '3*1A_output format'#000+ '3*2Ao_coff file using GNU AS'#000+ '3*2Anasmcoff_coff file using Nasm'#000+ '3*2Anasmelf_elf32 (linux) file using Nasm'#000+ '3*2Anasmobj_obj file using Nasm'#000+ - '3*2Amasm_obj using Masm (Mircosoft)'#000+ - '3*2Atasm_obj usin','g Tasm (Borland)'#000+ + '3*2Am','asm_obj using Masm (Mircosoft)'#000+ + '3*2Atasm_obj using Tasm (Borland)'#000+ '3*1R_assembler reading style'#000+ '3*2Ratt_read AT&T style assembler'#000+ '3*2Rintel_read Intel style assembler'#000+ '3*2Rdirect_copy assembler text directly to assembler file'#000+ - '3*1O_optimizations'#000+ + '3*1O_optimi','zations'#000+ '3*2Og_generate smaller code'#000+ - '3*2OG_genera','te faster code (default)'#000+ + '3*2OG_generate faster code (default)'#000+ '3*2Or_keep certain variables in registers (still BUGGY!!!)'#000+ '3*2Ou_enable uncertain optimizations (see docs)'#000+ '3*2O1_level 1 optimizations (quick optimizations)'#000+ - '3*2O2_level 2 optimizations (-O1 + slower optimizations)'#000+ - '3','*2O3_level 3 optimizations (same as -O2u)'#000+ + '3*2O2_leve','l 2 optimizations (-O1 + slower optimizations)'#000+ + '3*2O3_level 3 optimizations (same as -O2u)'#000+ '3*2Op_target processor'#000+ '3*3Op1_set target processor to 386/486'#000+ '3*3Op2_set target processor to Pentium/PentiumMMX (tm)'#000+ - '3*3Op3_set target processor to PPro/PII/c6x86/K6 (tm)'#000+ - '3*1T_Target operating sy','stem'#000+ + '3*3Op3_set target processor to PP','ro/PII/c6x86/K6 (tm)'#000+ + '3*1T_Target operating system'#000+ '3*2TGO32V1_version 1 of DJ Delorie DOS extender'#000+ '3*2TGO32V2_version 2 of DJ Delorie DOS extender'#000+ '3*2TLINUX_Linux'#000+ '3*2TOS2_OS/2 2.x'#000+ '3*2TWin32_Windows 32 Bit'#000+ '6*1A_output format'#000+ - '6*2Ao_Unix o-file using GNU AS'#000+ - '6*2Agas_GNU Motorola assembl','er'#000+ + '6*2Ao_Unix ','o-file using GNU AS'#000+ + '6*2Agas_GNU Motorola assembler'#000+ '6*2Amit_MIT Syntax (old GAS)'#000+ '6*2Amot_Standard Motorola assembler'#000+ '6*1O_optimizations'#000+ '6*2Oa_turn on the optimizer'#000+ '6*2Og_generate smaller code'#000+ '6*2OG_generate faster code (default)'#000+ - '6*2Ox_optimize maximum (still BUGGY!!!)'#000+ - '6*2O2_set target pro','cessor to a MC68020+'#000+ + '6*2Ox_optimi','ze maximum (still BUGGY!!!)'#000+ + '6*2O2_set target processor to a MC68020+'#000+ '6*1R_assembler reading style'#000+ '6*2RMOT_read motorola style assembler'#000+ '6*1T_Target operating system'#000+ '6*2TAMIGA_Commodore Amiga'#000+ '6*2TATARI_Atari ST/STe/TT'#000+ - '6*2TMACOS_Macintosh m68k'#000+ + '6*2TMACOS_Macinto','sh m68k'#000+ '6*2TLINUX_Linux-68k'#000+ '**1*_'#000+ - '**1?_shows thi','s help'#000+ + '**1?_shows this help'#000+ '**1h_shows this help without waiting'#000 ); diff --git a/compiler/pp.pas b/compiler/pp.pas index cbc88312ea..8cad0c9aba 100644 --- a/compiler/pp.pas +++ b/compiler/pp.pas @@ -164,7 +164,7 @@ uses {$endif gdb} {$ifdef i386} {$O opts386} - {$O i386} + {$O i386base} {$O cgai386} {$O tgeni386} {$O cg386add} @@ -267,7 +267,14 @@ begin end. { $Log$ - Revision 1.40 1999-01-27 13:05:41 pierre + Revision 1.41 1999-05-02 09:35:45 florian + + method message handlers which contain an explicit self can't be called + directly anymore + + self is now loaded at the start of the an message handler with an explicit + self + + $useoverlay fixed: i386 was renamed to i386base + + Revision 1.40 1999/01/27 13:05:41 pierre * give include file name on error Revision 1.39 1999/01/22 12:19:30 pierre diff --git a/compiler/tccal.pas b/compiler/tccal.pas index 16d8c3e7a6..68d9c185ff 100644 --- a/compiler/tccal.pas +++ b/compiler/tccal.pas @@ -426,6 +426,10 @@ implementation end; p^.right:=nil; end; + if assigned(p^.procdefinition) and + ((p^.procdefinition^.options and pocontainsself)<>0) then + message(cg_e_cannot_call_message_direct); + { procedure variable ? } if assigned(p^.right) then begin @@ -1149,7 +1153,14 @@ implementation end. { $Log$ - Revision 1.38 1999-05-01 13:24:47 peter + Revision 1.39 1999-05-02 09:35:46 florian + + method message handlers which contain an explicit self can't be called + directly anymore + + self is now loaded at the start of the an message handler with an explicit + self + + $useoverlay fixed: i386 was renamed to i386base + + Revision 1.38 1999/05/01 13:24:47 peter * merged nasm compiler * old asm moved to oldasm/