+ softfloat support for wince

* more units are build for wince

git-svn-id: trunk@959 -
This commit is contained in:
florian 2005-08-28 12:40:43 +00:00
parent 726dfa7a37
commit adb193497d
20 changed files with 656 additions and 369 deletions

View File

@ -200,32 +200,43 @@ unit cgcpu;
procedure tcgarm.a_param_ref(list : taasmoutput;size : tcgsize;const r : treference;const paraloc : TCGPara);
var
ref: treference;
tmpreg: tregister;
tmpref, ref: treference;
location: pcgparalocation;
sizeleft: aint;
begin
paraloc.check_simple_location;
case paraloc.location^.loc of
LOC_REGISTER,LOC_CREGISTER:
a_load_ref_reg(list,size,size,r,paraloc.location^.register);
LOC_REFERENCE:
begin
reference_reset(ref);
ref.base:=paraloc.location^.reference.index;
ref.offset:=paraloc.location^.reference.offset;
tmpreg := getintregister(list,size);
a_load_ref_reg(list,size,size,r,tmpreg);
a_load_reg_ref(list,size,size,tmpreg,ref);
location := paraloc.location;
tmpref := r;
sizeleft := paraloc.intsize;
while assigned(location) do
begin
case location^.loc of
LOC_REGISTER,LOC_CREGISTER:
a_load_ref_reg(list,location^.size,location^.size,tmpref,location^.register);
LOC_REFERENCE:
begin
reference_reset_base(ref,location^.reference.index,location^.reference.offset);
g_concatcopy(list,tmpref,ref,sizeleft);
if assigned(location^.next) then
internalerror(2005010710);
end;
LOC_FPUREGISTER,LOC_CFPUREGISTER:
case location^.size of
OS_F32, OS_F64:
a_loadfpu_ref_reg(list,location^.size,tmpref,location^.register);
else
internalerror(2002072801);
end;
LOC_VOID:
begin
// nothing to do
end;
else
internalerror(2002081103);
end;
LOC_FPUREGISTER,LOC_CFPUREGISTER:
case size of
OS_F32, OS_F64:
a_loadfpu_ref_reg(list,size,r,paraloc.location^.register);
else
internalerror(2002072801);
end;
else
internalerror(2002081103);
end;
inc(tmpref.offset,tcgsize2size[location^.size]);
dec(sizeleft,tcgsize2size[location^.size]);
location := location^.next;
end;
end;
@ -235,21 +246,21 @@ unit cgcpu;
tmpreg: tregister;
begin
paraloc.check_simple_location;
case paraloc.location^.loc of
LOC_REGISTER,LOC_CREGISTER:
a_loadaddr_ref_reg(list,r,paraloc.location^.register);
LOC_REFERENCE:
begin
reference_reset(ref);
ref.base := paraloc.location^.reference.index;
ref.offset := paraloc.location^.reference.offset;
tmpreg := getintregister(list,OS_ADDR);
a_loadaddr_ref_reg(list,r,tmpreg);
a_load_reg_ref(list,OS_ADDR,OS_ADDR,tmpreg,ref);
end;
else
internalerror(2002080701);
end;
case paraloc.location^.loc of
LOC_REGISTER,LOC_CREGISTER:
a_loadaddr_ref_reg(list,r,paraloc.location^.register);
LOC_REFERENCE:
begin
reference_reset(ref);
ref.base := paraloc.location^.reference.index;
ref.offset := paraloc.location^.reference.offset;
tmpreg := getintregister(list,OS_ADDR);
a_loadaddr_ref_reg(list,r,tmpreg);
a_load_reg_ref(list,OS_ADDR,OS_ADDR,tmpreg,ref);
end;
else
internalerror(2002080701);
end;
end;
@ -904,7 +915,7 @@ unit cgcpu;
OS_F80:
oppostfix:=PF_E;
else
InternalError(200309021);
InternalError(200309022);
end;
handle_load_store(list,A_STF,oppostfix,reg,ref);
end;

View File

@ -27,7 +27,7 @@ unit cpupara;
interface
uses
globtype,
globtype,globals,
aasmtai,
cpuinfo,cpubase,cgbase,
symconst,symbase,symtype,symdef,parabase,paramgr;
@ -107,7 +107,7 @@ unit cpupara;
orddef:
getparaloc:=LOC_REGISTER;
floatdef:
if calloption in [pocall_cdecl,pocall_cppdecl,pocall_softfloat] then
if (calloption in [pocall_cdecl,pocall_cppdecl,pocall_softfloat]) or (cs_fp_emulation in aktmoduleswitches) then
getparaloc:=LOC_REGISTER
else
getparaloc:=LOC_FPUREGISTER;
@ -403,8 +403,34 @@ unit cpupara;
{ Return in FPU register? }
if p.rettype.def.deftype=floatdef then
begin
p.funcretloc[side].loc:=LOC_FPUREGISTER;
p.funcretloc[side].register:=NR_FPU_RESULT_REG;
if (p.proccalloption in [pocall_cdecl,pocall_cppdecl,pocall_softfloat]) or (cs_fp_emulation in aktmoduleswitches) then
begin
case retcgsize of
OS_64,
OS_F64:
begin
{ low }
p.funcretloc[side].loc:=LOC_REGISTER;
p.funcretloc[side].register64.reglo:=NR_FUNCTION_RESULT64_LOW_REG;
p.funcretloc[side].register64.reghi:=NR_FUNCTION_RESULT64_HIGH_REG;
p.funcretloc[side].size:=OS_64;
end;
OS_32,
OS_F32:
begin
p.funcretloc[side].loc:=LOC_REGISTER;
p.funcretloc[side].register:=NR_FUNCTION_RETURN_REG;
p.funcretloc[side].size:=OS_32;
end;
else
internalerror(2005082603);
end;
end
else
begin
p.funcretloc[side].loc:=LOC_FPUREGISTER;
p.funcretloc[side].register:=NR_FPU_RESULT_REG;
end;
end
{ Return in register? }
else if not ret_in_param(p.rettype.def,p.proccalloption) then

View File

@ -57,7 +57,7 @@ interface
implementation
uses
verbose,globals,systems,
verbose,globtype,globals,systems,
symconst,symdef,aasmbase,aasmtai,
defutil,
cgbase,cgutils,
@ -76,37 +76,77 @@ implementation
var
fname: string[19];
begin
{ converting a 64bit integer to a float requires a helper }
if is_64bitint(left.resulttype.def) or
is_currency(left.resulttype.def) then
if cs_fp_emulation in aktmoduleswitches then
begin
{ hack to avoid double division by 10000, as it's
already done by resulttypepass.resulttype_int_to_real }
if is_currency(left.resulttype.def) then
left.resulttype := s64inttype;
if is_signed(left.resulttype.def) then
fname := 'fpc_int64_to_double'
if target_info.system in system_wince then
begin
{ converting a 64bit integer to a float requires a helper }
if is_64bitint(left.resulttype.def) or
is_currency(left.resulttype.def) then
begin
{ hack to avoid double division by 10000, as it's
already done by resulttypepass.resulttype_int_to_real }
if is_currency(left.resulttype.def) then
left.resulttype := s64inttype;
if is_signed(left.resulttype.def) then
fname:='i64tod'
else
fname:='ui64tod';
end
else
{ other integers are supposed to be 32 bit }
begin
if is_signed(left.resulttype.def) then
fname:='itod'
else
fname:='utod';
firstpass(left);
end;
result:=ccallnode.createintern(fname,ccallparanode.create(
left,nil));
left:=nil;
firstpass(result);
exit;
end
else
fname := 'fpc_qword_to_double';
result := ccallnode.createintern(fname,ccallparanode.create(
left,nil));
left:=nil;
firstpass(result);
exit;
begin
internalerror(2005082803);
end;
end
else
{ other integers are supposed to be 32 bit }
begin
if is_signed(left.resulttype.def) then
inserttypeconv(left,s32inttype)
{ converting a 64bit integer to a float requires a helper }
if is_64bitint(left.resulttype.def) or
is_currency(left.resulttype.def) then
begin
{ hack to avoid double division by 10000, as it's
already done by resulttypepass.resulttype_int_to_real }
if is_currency(left.resulttype.def) then
left.resulttype := s64inttype;
if is_signed(left.resulttype.def) then
fname := 'fpc_int64_to_double'
else
fname := 'fpc_qword_to_double';
result := ccallnode.createintern(fname,ccallparanode.create(
left,nil));
left:=nil;
firstpass(result);
exit;
end
else
inserttypeconv(left,u32inttype);
firstpass(left);
{ other integers are supposed to be 32 bit }
begin
if is_signed(left.resulttype.def) then
inserttypeconv(left,s32inttype)
else
inserttypeconv(left,u32inttype);
firstpass(left);
end;
result := nil;
if registersfpu<1 then
registersfpu:=1;
expectloc:=LOC_FPUREGISTER;
end;
result := nil;
if registersfpu<1 then
registersfpu:=1;
expectloc:=LOC_FPUREGISTER;
end;

View File

@ -85,10 +85,18 @@ implementation
function tarminlinenode.first_abs_real : tnode;
begin
expectloc:=LOC_FPUREGISTER;
registersint:=left.registersint;
registersfpu:=max(left.registersfpu,1);
first_abs_real := nil;
if cs_fp_emulation in aktmoduleswitches then
begin
// if target_info.system in system_wince then
result:=inherited first_abs_real;
end
else
begin
expectloc:=LOC_FPUREGISTER;
registersint:=left.registersint;
registersfpu:=max(left.registersfpu,1);
first_abs_real:=nil;
end;
end;

View File

@ -891,7 +891,10 @@ implementation
result:=int_cgsize(def.size);
end;
floatdef:
result := tfloat2tcgsize[tfloatdef(def).typ];
if cs_fp_emulation in aktmoduleswitches then
result:=int_cgsize(def.size)
else
result:=tfloat2tcgsize[tfloatdef(def).typ];
recorddef :
result:=int_cgsize(def.size);
arraydef :

View File

@ -69,6 +69,7 @@
{$ifdef arm}
{$define cpuflags}
{$define cpufpemu}
{$define cpuneedsdiv32helper}
{$define cputargethasfixedstack}
{$define cpurequiresproperalignment}

View File

@ -202,6 +202,7 @@ uses
end;
{$ifdef cpufpemu}
{ check if floating point emulation is on?}
{ fpu emulation isn't unit levelwise
if ((ppufile.header.flags and uf_fpu_emulation)<>0) and
(cs_fp_emulation in aktmoduleswitches) then
begin
@ -210,6 +211,7 @@ uses
Message(unit_u_ppu_invalid_fpumode);
exit;
end;
}
{$endif cpufpemu}
{ Load values to be access easier }

View File

@ -660,7 +660,7 @@ const
option_info=11024;
option_help_pages=11025;
MsgTxtSize = 39030;
MsgTxtSize = 39029;
MsgIdxMax : array[1..20] of longint=(
19,73,215,59,59,47,100,20,135,60,

View File

@ -154,464 +154,464 @@ const msgtxt : array[0..000162,1..240] of char=(
'03058_E_There is no method in an ancestor class to be overridden: "$1"'+
#000+
'03059_E_No member is provided to access property'#000+
'03060_W_Stored prorperty directive is not yet implemented'#000+
'03061_E_Illegal symbol for prop','erty access'#000+
'03060_W_Stored property directive is not yet implemented'#000+
'03061_E_Illegal symbol for prope','rty access'#000+
'03062_E_Cannot access a protected field of an object here'#000+
'03063_E_Cannot access a private field of an object here'#000+
'03066_E_overridden methods must have the same return type: "$2" is ove'+
'rriden by "$1" which has another return type',#000+
'rriden by "$1" which has another return type'#000,
'03067_E_EXPORT declared functions can'#039't be nested'#000+
'03068_E_methods can'#039't be EXPORTed'#000+
'03069_E_call by var parameters have to match exactly: Got "$1" expecte'+
'd "$2"'#000+
'03070_E_Class isn'#039't a parent class of the current class'#000+
'03071_E_SELF is only a','llowed in methods'#000+
'03071_E_SELF is only al','lowed in methods'#000+
'03072_E_methods can be only in other methods called direct with type i'+
'dentifier of the class'#000+
'03073_E_Illegal use of '#039':'#039#000+
'03074_E_range check error in set constructor or duplicate set element'#000+
'03075_E_Pointer to object expect','ed'#000+
'03075_E_Pointer to object expecte','d'#000+
'03076_E_Expression must be constructor call'#000+
'03077_E_Expression must be destructor call'#000+
'03078_E_Illegal order of record elements'#000+
'03079_E_Expression type must be class or record type'#000+
'03080_E_Procedures can'#039't return a value'#000+
'03081_E_construc','tors and destructors must be methods'#000+
'03081_E_construct','ors and destructors must be methods'#000+
'03082_E_Operator is not overloaded'#000+
'03083_E_Impossible to overload assignment for equal types'#000+
'03084_E_Impossible operator overload'#000+
'03085_E_Re-raise isn'#039't possible there'#000+
'03086_E_The extended syntax of new ','or dispose isn'#039't allowed for '+
'03086_E_The extended syntax of new o','r dispose isn'#039't allowed for '+
'a class'#000+
'03088_E_Procedure overloading is switched off'#000+
'03089_E_It is not possible to overload this operator (overload = inste'+
'ad)'#000+
'03090_E_Comparative operator must return a boolean value'#000+
'03091_E_Only virtual metho','ds can be abstract'#000+
'03091_E_Only virtual method','s can be abstract'#000+
'03092_F_Use of unsupported feature!'#000+
'03093_E_The mix of different kind of objects (class, object, interface'+
', etc) isn'#039't allowed'#000+
'03094_W_Unknown procedure directive had to be ignored: "$1"'#000+
'03095_E_absolute can only be assoc','iated to one variable'#000+
'03095_E_absolute can only be associ','ated to one variable'#000+
'03096_E_absolute can only be associated with a var or const'#000+
'03097_E_Only one variable can be initialized'#000+
'03098_E_Abstract methods shouldn'#039't have any definition (with funct'+
'ion body)'#000+
'03099_E_This overloaded function can'#039,'t be local (must be exported'+
')'#000+
'03099_E_This overloaded function can'#039't',' be local (must be exporte'+
'd)'#000+
'03100_W_Virtual methods are used without a constructor in "$1"'#000+
'03101_CL_Macro defined: $1'#000+
'03102_CL_Macro undefined: $1'#000+
'03103_CL_Macro $1 set to $2'#000+
'03104_I_Compiling $1'#000+
'03105_UL_Parsing interface of unit $1'#000+
'0310','6_UL_Parsing implementation of $1'#000+
'03106','_UL_Parsing implementation of $1'#000+
'03107_DL_Compiling $1 for the second time'#000+
'03109_E_No property found to override'#000+
'03110_E_Only one default property is allowed'#000+
'03111_E_The default property must be an array property'#000+
'03112_E_Virtual constructo','rs are only supported in class object mode'+
'03112_E_Virtual constructor','s are only supported in class object mode'+
'l'#000+
'03113_E_No default property available'#000+
'03114_E_The class can'#039't have a published section, use the {$M+} sw'+
'itch'#000+
'03115_E_Forward declaration of class "$1" must be resolved here to use'+
' the class as anc','estor'#000+
' the class as ance','stor'#000+
'03116_E_Local operators not supported'#000+
'03117_E_Procedure directive "$1" not allowed in interface section'#000+
'03118_E_Procedure directive "$1" not allowed in implementation section'+
#000+
'03119_E_Procedure directive "$1" not allowed in procvar dec','laration'#000+
'03119_E_Procedure directive "$1" not allowed in procvar decl','aration'#000+
'03120_E_Function is already declared Public/Forward "$1"'#000+
'03121_E_Can'#039't use both EXPORT and EXTERNAL'#000+
'03123_W_"$1" not yet supported inside inline procedure/function'#000+
'03124_W_Inlining disabled'#000+
'03125_I_Writing Browser log $1'#000+
'03126_H_ma','y be pointer dereference is missing'#000+
'03126_H_may',' be pointer dereference is missing'#000+
'03127_F_Selected assembler reader not supported'#000+
'03128_E_Procedure directive "$1" has conflicts with other directives'#000+
'03129_E_Calling convention doesn'#039't match forward'#000+
'03131_E_Property can'#039't have a default ','value'#000+
'03131_E_Property can'#039't have a default v','alue'#000+
'03132_E_The default value of a property must be constant'#000+
'03133_E_Symbol can'#039't be published, can be only a class'#000+
'03134_E_That kind of property can'#039't be published'#000+
'03136_E_An import name is required'#000+
'03138_E_Division by zero'#000+
'03139_E_Inval','id floating point operation'#000+
'03139_E_Invali','d floating point operation'#000+
'03140_E_Upper bound of range is less than lower bound'#000+
'03141_W_string "$1" is longer than "$2"'#000+
'03142_E_string length is larger than array of char length'#000+
'03143_E_Illegal expression after message directive'#000+
'03144_E_M','essage handlers can take only one call by ref. parameter'#000+
'03144_E_Me','ssage handlers can take only one call by ref. parameter'#000+
'03145_E_Duplicate message label: "$1"'#000+
'03146_E_Self can only be an explicit parameter in methods which are me'+
'ssage handlers'#000+
'03147_E_Threadvars can be only static or global'#000+
'03148_F_Dire','ct assembler not supported for binary output format'#000+
'03148_F_Direc','t assembler not supported for binary output format'#000+
'03149_W_Don'#039't load OBJPAS unit manually, use \{\$mode objfpc\} or '+
'\{\$mode delphi\} instead'#000+
'03150_E_OVERRIDE can'#039't be used in objects'#000+
'03151_E_Data types which require initialization/finali','zation can'#039+
'03151_E_Data types which require initialization/finaliz','ation can'#039+
't be used in variant records'#000+
'03152_E_Resourcestrings can be only static or global'#000+
'03153_E_Exit with argument can'#039't be used here'#000+
'03154_E_The type of the storage symbol must be boolean'#000+
'03155_E_This symbol isn'#039't allowed as storage s','ymbol'#000+
'03155_E_This symbol isn'#039't allowed as storage sy','mbol'#000+
'03156_E_Only class which are compiled in $M+ mode can be published'#000+
'03157_E_Procedure directive expected'#000+
'03158_E_The value for a property index must be of an ordinal type'#000+
'03159_E_Procedure name to short to be exported'#000+
'03160_E_No DEFFIL','E entry can be generated for unit global vars'#000+
'03160_E_No DEFFILE',' entry can be generated for unit global vars'#000+
'03161_E_Compile without -WD option'#000+
'03162_F_You need ObjFpc (-S2) or Delphi (-Sd) mode to compile this mod'+
'ule'#000+
'03163_E_Can'#039't export with index under $1'#000+
'03164_E_Exporting of variables is not suppor','ted under $1'#000+
'03164_E_Exporting of variables is not support','ed under $1'#000+
'03165_E_Improper GUID syntax'#000+
'03168_W_Procedure named "$1" not found that is suitable for implementi'+
'ng the $2.$3'#000+
'03169_E_interface identifier expected'#000+
'03170_E_Type "$1" can'#039't be used as array index type'#000+
'03171_E_Con- and destruct','ors aren'#039't allowed in interfaces'#000+
'03171_E_Con- and destructo','rs aren'#039't allowed in interfaces'#000+
'03172_E_Access specifiers can'#039't be used in INTERFACES'#000+
'03173_E_An interface can'#039't contain fields'#000+
'03174_E_Can'#039't declare local procedure as EXTERNAL'#000+
'03175_W_Some fields coming before "$1" weren'#039't initialized'#000+
'03','176_E_Some fields coming before "$1" weren'#039't initialized'#000+
'031','76_E_Some fields coming before "$1" weren'#039't initialized'#000+
'03177_W_Some fields coming after "$1" weren'#039't initialized'#000+
'03178_E_VarArgs directive without CDecl and External'#000+
'03179_E_Self must be a normal (call-by-value) parameter'#000+
'03180_E_Interfac','e "$1" has no interface identification'#000+
'03180_E_Interface',' "$1" has no interface identification'#000+
'03181_E_Unknown class field or method identifier "$1"'#000+
'03182_W_Overriding calling convention "$1" with "$2"'#000+
'03183_E_Typed constants of the type "procedure of object" can only be '+
'initialized with NIL'#000+
'031','84_E_Default value can only be assigned to one parameter'#000+
'0318','4_E_Default value can only be assigned to one parameter'#000+
'03185_E_Default parameter required for "$1"'#000+
'03186_W_Use of unsupported feature!'#000+
'03187_H_C arrays are passed by reference'#000+
'03188_E_C array of const must be the last argument'#000+
'03189_H_Typ','e "$1" redefinition'#000+
'03189_H_Type',' "$1" redefinition'#000+
'03190_W_cdecl'#039'ared functions have no high parameter'#000+
'03191_W_cdecl'#039'ared functions do not support open strings'#000+
'03192_E_Cannot initialize variables declared as threadvar'#000+
'03193_E_Message directive is only allowed in Classes'#000,
'03194_E_Procedure or Function expected'#000+
'03193_E_Message directive is only allowed in Classes'#000+
'0','3194_E_Procedure or Function expected'#000+
'03195_W_Calling convention directive ignored: "$1"'#000+
'03196_E_REINTRODUCE can'#039't be used in objects'#000+
'03197_E_Each argument must have it'#039's own location'#000+
'03198_E_Each argument must have an explicit location'#000+
'03','199_E_Unknown argument location'#000+
'031','99_E_Unknown argument location'#000+
'03200_E_32 Bit-Integer or pointer variable expected'#000+
'03201_E_Goto statements aren'#039't allowed between different procedure'+
's'#000+
'03202_F_Procedure too complex, it requires too much registers'#000+
'03203_E_Illegal expression',#000+
'03203_E_Illegal expression'#000,
'03204_E_Invalid integer expression'#000+
'03205_E_Illegal qualifier'#000+
'03206_E_High range limit < low range limit'#000+
'03207_E_Exit'#039's parameter must be the name of the procedure it is u'+
'sed in'#000+
'03208_E_Illegal assignment to for-loop variable "$1"'#000+
'03209_E_C','an'#039't declare local variable as EXTERNAL'#000+
'03209_E_Ca','n'#039't declare local variable as EXTERNAL'#000+
'03210_E_Procedure is already declared EXTERNAL'#000+
'03211_W_Implicit uses of Variants unit'#000+
'03212_E_Class and static methods can'#039't be used in INTERFACES'#000+
'03213_E_Overflow in arithmetic operation'#000+
'03214_E_Prot','ected or private expected'#000+
'03214_E_Prote','cted or private expected'#000+
'04000_E_Type mismatch'#000+
'04001_E_Incompatible types: got "$1" expected "$2"'#000+
'04002_E_Type mismatch between "$1" and "$2"'#000+
'04003_E_Type identifier expected'#000+
'04004_E_Variable identifier expected'#000+
'04005_E_Integer expression ','expected, but got "$1"'#000+
'04005_E_Integer expression e','xpected, but got "$1"'#000+
'04006_E_Boolean expression expected, but got "$1"'#000+
'04007_E_Ordinal expression expected'#000+
'04008_E_pointer type expected, but got "$1"'#000+
'04009_E_class type expected, but got "$1"'#000+
'04011_E_Can'#039't evaluate constant expression'#000+
'04','012_E_Set elements are not compatible'#000+
'040','12_E_Set elements are not compatible'#000+
'04013_E_Operation not implemented for sets'#000+
'04014_W_Automatic type conversion from floating type to COMP which is '+
'an integer type'#000+
'04015_H_use DIV instead to get an integer result'#000+
'04016_E_string types doe','sn'#039't match, because of $V+ mode'#000+
'04016_E_string types does','n'#039't match, because of $V+ mode'#000+
'04017_E_succ or pred on enums with assignments not possible'#000+
'04018_E_Can'#039't read or write variables of this type'#000+
'04019_E_Can'#039't use readln or writeln on typed file'#000+
'04020_E_Can'#039't use read or write on untyped file','.'#000+
'04020_E_Can'#039't use read or write on untyped file.',#000+
'04021_E_Type conflict between set elements'#000+
'04022_W_lo/hi(dword/qword) returns the upper/lower word/dword'#000+
'04023_E_Integer or real expression expected'#000+
'04024_E_Wrong type "$1" in array constructor'#000+
'04025_E_Incompatible type for arg no. $1: Go','t "$2", expected "$3"'#000+
'04025_E_Incompatible type for arg no. $1: Got',' "$2", expected "$3"'#000+
'04026_E_Method (variable) and Procedure (variable) are not compatible'#000+
'04027_E_Illegal constant passed to internal math function'#000+
'04028_E_Can'#039't get the address of constants'#000+
'04029_E_Argument can'#039't be assigned to'#000+
'04030_E_C','an'#039't assign local procedure/function to procedure varia'+
'04030_E_Ca','n'#039't assign local procedure/function to procedure varia'+
'ble'#000+
'04031_E_Can'#039't assign values to an address'#000+
'04032_E_Can'#039't assign values to const variable'#000+
'04033_E_Array type required'#000+
'04034_E_interface type expected, but got "$1"'#000+
'04035_W_Mixing sign','ed expressions and longwords gives a 64bit result'+
'04035_W_Mixing signe','d expressions and longwords gives a 64bit result'+
#000+
'04036_W_Mixing signed expressions and cardinals here may cause a range'+
' check error'#000+
'04037_E_Typecast has different size ($1 -> $2) in assignment'#000+
'04038_E_enums with assignments can'#039't be used a','s array index'#000+
'04038_E_enums with assignments can'#039't be used as',' array index'#000+
'04039_E_Class or Object types "$1" and "$2" are not related'#000+
'04040_W_Class types "$1" and "$2" are not related'#000+
'04041_E_Class or interface type expected, but got "$1"'#000+
'04042_E_Type "$1" is not completely defined'#000+
'04043_W_String li','teral has more characters than short string length'#000+
'04043_W_String lit','eral has more characters than short string length'#000+
'04044_W_Comparison is always false due to range of values'#000+
'04045_W_Comparison is always true due to range of values'#000+
'04046_W_Constructing a class "$1" with abstract methods'#000+
'04047_H_The left o','perand of the IN operator should be byte sized'#000+
'04047_H_The left op','erand of the IN operator should be byte sized'#000+
'04048_W_Type size mismatch, possible loss of data / range check error'#000+
'04049_H_Type size mismatch, possible loss of data / range check error'#000+
'04050_E_The address of an abstract method can'#039't be ta','ken'#000+
'04050_E_The address of an abstract method can'#039't be tak','en'#000+
'04051_E_The operator is not applicable for the operand type'#000+
'04052_E_Constant Expression expected'#000+
'04053_E_Operation "$1" not supported for types "$2" and "$3"'#000+
'04054_E_Illegal type conversion: "$1" to "$2"'#000+
'04055_H_Conversion between ordin','als and pointers is not portable'#000+
'04055_H_Conversion between ordina','ls and pointers is not portable'#000+
'04056_W_Conversion between ordinals and pointers is not portable'#000+
'04057_E_Can'#039't determine which overloaded function to call'#000+
'04058_E_Illegal counter variable'#000+
'05000_E_Identifier not found "$1"'#000+
'05001_F_Internal ','Error in SymTableStack()'#000+
'05001_F_Internal E','rror in SymTableStack()'#000+
'05002_E_Duplicate identifier "$1"'#000+
'05003_H_Identifier already defined in $1 at line $2'#000+
'05004_E_Unknown identifier "$1"'#000+
'05005_E_Forward declaration not solved "$1"'#000+
'05007_E_Error in type definition'#000+
'05009_E_Forward type',' not resolved "$1"'#000+
'05009_E_Forward type ','not resolved "$1"'#000+
'05010_E_Only static variables can be used in static methods or outside'+
' methods'#000+
'05012_F_record or class type expected'#000+
'05013_E_Instances of classes or objects with an abstract method are no'+
't allowed'#000+
'05014_W_Label not define','d "$1"'#000+
'05014_W_Label not defined',' "$1"'#000+
'05015_E_Label used but not defined "$1"'#000+
'05016_E_Illegal label declaration'#000+
'05017_E_GOTO and LABEL are not supported (use switch -Sg)'#000+
'05018_E_Label not found'#000+
'05019_E_identifier isn'#039't a label'#000+
'05020_E_label already defined'#000+
'05021_E_illega','l type declaration of set elements'#000+
'05021_E_illegal',' type declaration of set elements'#000+
'05022_E_Forward class definition not resolved "$1"'#000+
'05023_H_Unit "$1" not used in $2'#000+
'05024_H_Parameter "$1" not used'#000+
'05025_N_Local variable "$1" not used'#000+
'05026_H_Value parameter "$1" is assigned but never u','sed'#000+
'05026_H_Value parameter "$1" is assigned but never us','ed'#000+
'05027_N_Local variable "$1" is assigned but never used'#000+
'05028_H_Local $1 "$2" is not used'#000+
'05029_N_Private field "$1.$2" is never used'#000+
'05030_N_Private field "$1.$2" is assigned but never used'#000+
'05031_N_Private method "$1.$2" never used'#000+
'0503','2_E_Set type expected'#000+
'05032','_E_Set type expected'#000+
'05033_W_Function result does not seem to be set'#000+
'05034_W_Type "$1" is not aligned correctly in current record for C'#000+
'05035_E_Unknown record field identifier "$1"'#000+
'05036_W_Local variable "$1" does not seem to be initialize','d'#000+
'05036_W_Local variable "$1" does not seem to be initialized',#000+
'05037_W_Variable "$1" does not seem to be initialized'#000+
'05038_E_identifier idents no member "$1"'#000+
'05039_H_Found declaration: $1'#000+
'05040_E_Data element too large'#000+
'05042_E_No matching implementation for interface method "$1" found'#000+
'05043_W_Symbol ','"$1" is deprecated'#000+
'05043_W_Symbol "','$1" is deprecated'#000+
'05044_W_Symbol "$1" is not portable'#000+
'05055_W_Symbol "$1" is not implemented'#000+
'05056_E_Can'#039't create unique type from this type'#000+
'05057_H_Local variable "$1" does not seem to be initialized'#000+
'05058_H_Variable "$1" does not seem to',' be initialized'#000+
'05058_H_Variable "$1" does not seem to ','be initialized'#000+
'06009_E_Parameter list size exceeds 65535 bytes'#000+
'06012_E_File types must be var parameters'#000+
'06013_E_The use of a far pointer isn'#039't allowed there'#000+
'06015_E_EXPORT declared functions can'#039't be called'#000+
'06016_W_Possible illegal call o','f constructor or destructor'#000+
'06016_W_Possible illegal call of',' constructor or destructor'#000+
'06017_N_Inefficient code'#000+
'06018_W_unreachable code'#000+
'06020_E_Abstract methods can'#039't be called directly'#000+
'06027_DL_Register $1 weight $2 $3'#000+
'06029_DL_Stack frame is omitted'#000+
'06031_E_Object or class methods can'#039't be inlin','e.'#000+
'06031_E_Object or class methods can'#039't be inline','.'#000+
'06032_E_Procvar calls cannot be inline.'#000+
'06033_E_No code for inline procedure stored'#000+
'06035_E_Element zero of an ansi/wide- or longstring can'#039't be acces'+
'sed, use (set)length instead'#000+
'06037_E_Constructors or destructors can not be called insi','de a '#039'w'+
'06037_E_Constructors or destructors can not be called insid','e a '#039'w'+
'ith'#039' clause'#000+
'06038_E_Cannot call message handler methods directly'#000+
'06039_E_Jump in or outside of an exception block'#000+
'06040_E_Control flow statements aren'#039't allowed in a finally block'#000+
'06041_W_Parameters size exceeds limit for certain cpu',#039's'#000+
'06041_W_Parameters size exceeds limit for certain cpu'#039,'s'#000+
'06042_W_Local variable size exceed limit for certain cpu'#039's'#000+
'06043_E_Local variables size exceeds supported limit'#000+
'06044_E_BREAK not allowed'#000+
'06045_E_CONTINUE not allowed'#000+
'06046_F_Unknown compilerproc "$1". Check if you use the correct run ti',
'me library.'#000+
'06046_F_Unknown compilerproc "$1". Check if you use the correct run ti'+
'm','e library.'#000+
'07000_DL_Starting $1 styled assembler parsing'#000+
'07001_DL_Finished $1 styled assembler parsing'#000+
'07002_E_Non-label pattern contains @'#000+
'07004_E_Error building record offset'#000+
'07005_E_OFFSET used without identifier'#000+
'07006_E_TYPE used witho','ut identifier'#000+
'07006_E_TYPE used withou','t identifier'#000+
'07007_E_Cannot use local variable or parameters here'#000+
'07008_E_need to use OFFSET here'#000+
'07009_E_need to use $ here'#000+
'07010_E_Cannot use multiple relocatable symbols'#000+
'07011_E_Relocatable symbol can only be added'#000+
'07012_E_Invalid const','ant expression'#000+
'07012_E_Invalid consta','nt expression'#000+
'07013_E_Relocatable symbol is not allowed'#000+
'07014_E_Invalid reference syntax'#000+
'07015_E_You can not reach $1 from that code'#000+
'07016_E_Local symbols/labels aren'#039't allowed as references'#000+
'07017_E_Invalid base and index register usage'#000+
'07','018_W_Possible error in object field handling'#000+
'070','18_W_Possible error in object field handling'#000+
'07019_E_Wrong scale factor specified'#000+
'07020_E_Multiple index register usage'#000+
'07021_E_Invalid operand type'#000+
'07022_E_Invalid string as opcode operand: $1'#000+
'07023_W_@CODE and @DATA not supported'#000+
'07024_E','_Null label references are not allowed'#000+
'07024_E_','Null label references are not allowed'#000+
'07025_E_Divide by zero in asm evaluator'#000+
'07026_E_Illegal expression'#000+
'07027_E_escape sequence ignored: $1'#000+
'07028_E_Invalid symbol reference'#000+
'07029_W_Fwait can cause emulation problems with emu387'#000+
'07030_W_$1',' without operand translated into $1P'#000+
'07030_W_$1 ','without operand translated into $1P'#000+
'07031_W_ENTER instruction is not supported by Linux kernel'#000+
'07032_W_Calling an overload function in assembler'#000+
'07033_E_Unsupported symbol type for operand'#000+
'07034_E_Constant value out of bounds'#000+
'07035_E_Error',' converting decimal $1'#000+
'07035_E_Error ','converting decimal $1'#000+
'07036_E_Error converting octal $1'#000+
'07037_E_Error converting binary $1'#000+
'07038_E_Error converting hexadecimal $1'#000+
'07039_H_$1 translated to $2'#000+
'07040_W_$1 is associated to an overloaded function'#000+
'07041_E_Cannot use SELF outsi','de a method'#000+
'07041_E_Cannot use SELF outsid','e a method'#000+
'07042_E_Cannot use OLDEBP outside a nested procedure'#000+
'07043_W_Procedures can'#039't return any value in asm code'#000+
'07044_E_SEG not supported'#000+
'07045_E_Size suffix and destination or source size do not match'#000+
'07046_W_Size suffix and destina','tion or source size do not match'#000+
'07046_W_Size suffix and destinat','ion or source size do not match'#000+
'07047_E_Assembler syntax error'#000+
'07048_E_Invalid combination of opcode and operands'#000+
'07049_E_Assembler syntax error in operand'#000+
'07050_E_Assembler syntax error in constant'#000+
'07051_E_Invalid String expression'#000+
'07052_','W_constant with symbol $1 for address which is not on a pointe'+
'07052_W','_constant with symbol $1 for address which is not on a pointe'+
'r'#000+
'07053_E_Unrecognized opcode $1'#000+
'07054_E_Invalid or missing opcode'#000+
'07055_E_Invalid combination of prefix and opcode: $1'#000+
'07056_E_Invalid combination of override and opcode: $1'#000+
'070','57_E_Too many operands on line'#000+
'0705','7_E_Too many operands on line'#000+
'07058_W_NEAR ignored'#000+
'07059_W_FAR ignored'#000+
'07060_E_Duplicate local symbol $1'#000+
'07061_E_Undefined local symbol $1'#000+
'07062_E_Unknown label identifier $1'#000+
'07063_E_Invalid register name'#000+
'07064_E_Invalid floating point reg','ister name'#000+
'07064_E_Invalid floating point regi','ster name'#000+
'07066_W_Modulo not supported'#000+
'07067_E_Invalid floating point constant $1'#000+
'07068_E_Invalid floating point expression'#000+
'07069_E_Wrong symbol type'#000+
'07070_E_Cannot index a local var or parameter with a register'#000+
'07071_E_Invalid segment ove','rride expression'#000+
'07071_E_Invalid segment over','ride expression'#000+
'07072_W_Identifier $1 supposed external'#000+
'07073_E_Strings not allowed as constants'#000+
'07074_No type of variable specified'#000+
'07075_E_assembler code not returned to text section'#000+
'07076_E_Not a directive or local symbol $1'#000+
'07077_E_Usi','ng a defined name as a local label'#000+
'07077_E_Usin','g a defined name as a local label'#000+
'07078_E_Dollar token is used without an identifier'#000+
'07079_W_32bit constant created for address'#000+
'07080_N_.align is target specific, use .balign or .p2align'#000+
'07081_E_Can'#039't access fields directly for parameters'#000,
'07082_E_Can'#039't access fields of objects/classes directly'#000+
'07081_E_Can'#039't access fields directly for parameters'#000+
'0','7082_E_Can'#039't access fields of objects/classes directly'#000+
'07083_E_No size specified and unable to determine the size of the oper'+
'ands'#000+
'07084_E_Cannot use RESULT in this function'#000+
'07086_W_"$1" without operand translated into "$1 %st,%st(1)"'#000+
'07087','_W_"$1 %st(n)" translated into "$1 %st,%st(n)"'#000+
'07087_','W_"$1 %st(n)" translated into "$1 %st,%st(n)"'#000+
'07088_W_"$1 %st(n)" translated into "$1 %st(n),%st"'#000+
'07089_E_Char < not allowed here'#000+
'07090_E_Char > not allowed here'#000+
'07093_W_ALIGN not supported'#000+
'07094_E_Inc and Dec cannot be together'#000+
'07095_E_In','valid reglist for movem'#000+
'07095_E_Inv','alid reglist for movem'#000+
'07096_E_Reglist invalid for opcode'#000+
'07097_E_Higher cpu mode required ($1)'#000+
'07098_W_No size specified and unable to determine the size of the oper'+
'ands, using DWORD as default'#000+
'07099_E_Syntax error while trying to parse a',' shifter operand'#000+
'07099_E_Syntax error while trying to parse a ','shifter operand'#000+
'08000_F_Too many assembler files'#000+
'08001_F_Selected assembler output not supported'#000+
'08002_F_Comp not supported'#000+
'08003_F_Direct not support for binary writers'#000+
'08004_E_Allocating of data is only allowed in bss section'#000+
'08005_F_No ','binary writer selected'#000+
'08005_F_No b','inary writer selected'#000+
'08006_E_Asm: Opcode $1 not in table'#000+
'08007_E_Asm: $1 invalid combination of opcode and operands'#000+
'08008_E_Asm: 16 Bit references not supported'#000+
'08009_E_Asm: Invalid effective address'#000+
'08010_E_Asm: Immediate or reference ex','pected'#000+
'08010_E_Asm: Immediate or reference exp','ected'#000+
'08011_E_Asm: $1 value exceeds bounds $2'#000+
'08012_E_Asm: Short jump is out of range $1'#000+
'08013_E_Asm: Undefined label $1'#000+
'08014_E_Asm: Comp type not supported for this target'#000+
'08015_E_Asm: Extended type not supported for this target'#000+
'08016_E_','Asm: Duplicate label $1'#000+
'08016_E_A','sm: Duplicate label $1'#000+
'08017_E_Asm: Redefined label $1'#000+
'08018_E_Asm: First defined here'#000+
'08019_E_Asm: Invalid register $1'#000+
'09000_W_Source operating system redefined'#000+
'09001_I_Assembling (pipe) $1'#000+
'09002_E_Can'#039't create assember file: $1'#000+
'09003_E_C','an'#039't create object file: $1'#000+
'09003_E_Ca','n'#039't create object file: $1'#000+
'09004_E_Can'#039't create archive file: $1'#000+
'09005_E_Assembler $1 not found, switching to external assembling'#000+
'09006_T_Using assembler: $1'#000+
'09007_E_Error while assembling exitcode $1'#000+
'09008_E_Can'#039't call the assembler, erro','r $1 switching to external'+
'09008_E_Can'#039't call the assembler, error',' $1 switching to external'+
' assembling'#000+
'09009_I_Assembling $1'#000+
'09010_I_Assembling with smartlinking $1'#000+
'09011_W_Object $1 not found, Linking may fail !'#000+
'09012_W_Library $1 not found, Linking may fail !'#000+
'09013_E_Error while linking'#000+
'09014_E_Can'#039't c','all the linker, switching to external linking'#000+
'09014_E_Can'#039't ca','ll the linker, switching to external linking'#000+
'09015_I_Linking $1'#000+
'09016_E_Util $1 not found, switching to external linking'#000+
'09017_T_Using util $1'#000+
'09018_E_Creation of Executables not supported'#000+
'09019_E_Creation of Dynamic/Shared Libraries not s','upported'#000+
'09019_E_Creation of Dynamic/Shared Libraries not su','pported'#000+
'09020_I_Closing script $1'#000+
'09021_E_resource compiler not found, switching to external mode'#000+
'09022_I_Compiling resource $1'#000+
'09023_T_unit $1 can'#039't be statically linked, switching to smart lin'+
'king'#000+
'09024_T_unit $1 can'#039't be smart linked, s','witching to static linki'+
'09024_T_unit $1 can'#039't be smart linked, sw','itching to static linki'+
'ng'#000+
'09025_T_unit $1 can'#039't be shared linked, switching to static linkin'+
'g'#000+
'09026_E_unit $1 can'#039't be smart or static linked'#000+
'09027_E_unit $1 can'#039't be shared or static linked'#000+
'09028_D_Calling resource compiler "$1" with "$2"',' as command line'#000+
'09028_D_Calling resource compiler "$1" with "$2" ','as command line'#000+
'09128_F_Can'#039't post process executable $1'#000+
'09129_F_Can'#039't open executable $1'#000+
'09130_X_Size of Code: $1 bytes'#000+
'09131_X_Size of initialized data: $1 bytes'#000+
'09132_X_Size of uninitialized data: $1 bytes'#000+
'09133_X_Stack space reserved: ','$1 bytes'#000+
'09133_X_Stack space reserved: $','1 bytes'#000+
'09134_X_Stack space commited: $1 bytes'#000+
'10000_T_Unitsearch: $1'#000+
'10001_T_PPU Loading $1'#000+
@ -620,7 +620,7 @@ const msgtxt : array[0..000162,1..240] of char=(
'10004_U_PPU Crc: $1'#000+
'10005_U_PPU Time: $1'#000+
'10006_U_PPU File too short'#000+
'10007_U_PPU Invalid Header (no PPU ','at the begin)'#000+
'10007_U_PPU Invalid Header (no PPU a','t the begin)'#000+
'10008_U_PPU Invalid Version $1'#000+
'10009_U_PPU is compiled for another processor'#000+
'10010_U_PPU is compiled for an other target'#000+
@ -628,89 +628,89 @@ const msgtxt : array[0..000162,1..240] of char=(
'10012_U_Writing $1'#000+
'10013_F_Can'#039't Write PPU-File'#000+
'10014_F_Error reading PPU-File'#000+
'100','15_F_unexpected end of PPU-File'#000+
'1001','5_F_unexpected end of PPU-File'#000+
'10016_F_Invalid PPU-File entry: $1'#000+
'10017_F_PPU Dbx count problem'#000+
'10018_E_Illegal unit name: $1'#000+
'10019_F_Too much units'#000+
'10020_F_Circular unit reference between $1 and $2'#000+
'10021_F_Can'#039't compile unit $1, no source','s available'#000+
'10021_F_Can'#039't compile unit $1, no sources',' available'#000+
'10022_F_Can'#039't find unit $1'#000+
'10023_W_Unit $1 was not found but $2 exists'#000+
'10024_F_Unit $1 searched but $2 found'#000+
'10025_W_Compiling the system unit requires the -Us switch'#000+
'10026_F_There were $1 errors compiling module, stopping'#000+
'10027','_U_Load from $1 ($2) unit $3'#000+
'10027_','U_Load from $1 ($2) unit $3'#000+
'10028_U_Recompiling $1, checksum changed for $2'#000+
'10029_U_Recompiling $1, source found only'#000+
'10030_U_Recompiling unit, static lib is older than ppufile'#000+
'10031_U_Recompiling unit, shared lib is older than ppufile'#000+
'100','32_U_Recompiling unit, obj and asm are older than ppufile'#000+
'1003','2_U_Recompiling unit, obj and asm are older than ppufile'#000+
'10033_U_Recompiling unit, obj is older than asm'#000+
'10034_U_Parsing interface of $1'#000+
'10035_U_Parsing implementation of $1'#000+
'10036_U_Second load for unit $1'#000+
'10037_U_PPU Check file $1 time $2',#000+
'10037_U_PPU Check file $1 time $2'#000,
'10040_W_Can'#039't recompile unit $1, but found modifed include files'#000+
'10041_H_File $1 is newer than Release PPU file $2'#000+
'10042_U_Using a unit which was not compiled with correct FPU mode'#000+
'10043_U_Loading interface units from $1'#000+
'10044_U_Loading im','plementation units from $1'#000+
'10044_U_Loading imp','lementation units from $1'#000+
'10045_U_Interface CRC changed for unit $1'#000+
'10046_U_Implementation CRC changed for unit $1'#000+
'10047_U_Finished compiling unit $1'#000+
'10048_U_Add dependency of $1 to $2'#000+
'10049_U_No reload, is caller: $1'#000+
'10050_U_No reload, al','ready in second compile: $1'#000+
'10050_U_No reload, alr','eady in second compile: $1'#000+
'10051_U_Flag for reload: $1'#000+
'10052_U_Forced reloading'#000+
'10053_U_Previous state of $1: $2'#000+
'10054_U_Already compiling $1, setting second compile'#000+
'10055_U_Loading unit $1'#000+
'10056_U_Finished loading unit $1'#000+
'10057_U_Register','ing new unit $1'#000+
'10057_U_Registeri','ng new unit $1'#000+
'10058_U_Re-resolving unit $1'#000+
'10059_U_Skipping re-resolving unit $1, still loading used units'#000+
'11000_$1 [options] <inputfile> [options]'#000+
'11001_W_Only one source file supported'#000+
'11002_W_DEF file can be created only for OS/2'#000+
'11003','_E_nested response files are not supported'#000+
'11003_','E_nested response files are not supported'#000+
'11004_F_No source file name in command line'#000+
'11005_N_No option inside $1 config file'#000+
'11006_E_Illegal parameter: $1'#000+
'11007_H_-? writes help pages'#000+
'11008_F_Too many config files nested'#000+
'11009_F_Unable to',' open file $1'#000+
'11009_F_Unable to ','open file $1'#000+
'11010_D_Reading further options from $1'#000+
'11011_W_Target is already set to: $1'#000+
'11012_W_Shared libs not supported on DOS platform, reverting to static'+
#000+
'11013_F_too many IF(N)DEFs'#000+
'11014_F_too many ENDIFs'#000+
'11015_F_open conditional at',' the end of the file'#000+
'11015_F_open conditional at ','the end of the file'#000+
'11016_W_Debug information generation is not supported by this executab'+
'le'#000+
'11017_H_Try recompiling with -dGDB'#000+
'11018_E_You are using the obsolete switch $1'#000+
'11019_E_You are using the obsolete switch $1, please use $2'#000+
'11020_','N_Switching assembler to default source writing assembler'#000+
'11020_N','_Switching assembler to default source writing assembler'#000+
'11021_W_Assembler output selected "$1" is not compatible with "$2"'#000+
'11022_W_"$1" assembler use forced'#000+
'11026_T_Reading options from file $1'#000+
'11027_T_Reading options from environment $1'#000,
'11028_D_Handling option "$1"'#000+
'11027_T_Reading options from environment $1'#000+
'1','1028_D_Handling option "$1"'#000+
'11029__*** press enter ***'#000+
'11030_H_Start of reading config file $1'#000+
'11031_H_End of reading config file $1'#000+
'11032_D_interpreting option "$1"'#000+
'11036_D_interpreting firstpass option "$1"'#000+
'11033_D_interpreting file opti','on "$1"'#000+
'11033_D_interpreting file optio','n "$1"'#000+
'11034_D_Reading config file "$1"'#000+
'11035_D_found source file name "$1"'#000+
'11039_E_Unknown code page'#000+
'11023_Free Pascal Compiler version $FPCVERSION [$FPCDATE] for $FPCCPU'#010+
'Copyright (c) 1993-2005 by Florian Klaempfl'#000+
'11024_Free Pascal Compi','ler version $FPCVERSION'#010+
'11024_Free Pascal Compil','er version $FPCVERSION'#010+
#010+
'Compiler Date : $FPCDATE'#010+
'Compiler CPU Target: $FPCCPU'#010+
@ -724,37 +724,37 @@ const msgtxt : array[0..000162,1..240] of char=(
'Supported FPU instruction sets:'#010+
' $FPUINSTRUCTIONSETS'#010+
#010+
'This program co','mes under the GNU General Public Licence'#010+
'This program com','es under the GNU General Public Licence'#010+
'For more information read COPYING.FPC'#010+
#010+
'Report bugs,suggestions etc to:'#010+
' bugrep@freepascal.org'#000+
'11025_**0*_put + after a boolean switch option to enable it, - to disa'+
'ble it'#010+
'**1a_the com','piler doesn'#039't delete the generated assembler file'#010+
'**1a_the comp','iler doesn'#039't delete the generated assembler file'#010+
'**2al_list sourcecode lines in assembler file'#010+
'**2an_list node info in assembler file'#010+
'*L2ap_use pipes instead of creating temporary assembler files'#010+
'**2ar_list register allocation/release info',' in assembler file'#010+
'**2ar_list register allocation/release info ','in assembler file'#010+
'**2at_list temp allocation/release info in assembler file'#010+
'**1A<x>_output format:'#010+
'**2Adefault_use default assembler'#010+
'3*2Aas_assemble using GNU AS'#010+
'3*2Anasmcoff_coff (Go32v2) file using Nasm'#010+
'3*2Anasmelf_elf32 (Linux) file usi','ng Nasm'#010+
'3*2Anasmelf_elf32 (Linux) file usin','g Nasm'#010+
'3*2Anasmwin32_Win32 object file using Nasm'#010+
'3*2Anasmwdosx_Win32/WDOSX object file using Nasm'#010+
'3*2Awasm_obj file using Wasm (Watcom)'#010+
'3*2Anasmobj_obj file using Nasm'#010+
'3*2Amasm_obj file using Masm (Microsoft)'#010+
'3*2Atasm_obj file using Tasm ','(Borland)'#010+
'3*2Atasm_obj file using Tasm (','Borland)'#010+
'3*2Aelf_elf32 (Linux) using internal writer'#010+
'3*2Acoff_coff (Go32v2) using internal writer'#010+
'3*2Apecoff_pecoff (Win32) using internal writer'#010+
'4*2Aas_assemble using GNU AS'#010+
'6*2Aas_Unix o-file using GNU AS'#010+
'6*2Agas_GNU Motorola assembler'#010+
'6','*2Amit_MIT Syntax (old GAS)'#010+
'6*','2Amit_MIT Syntax (old GAS)'#010+
'6*2Amot_Standard Motorola assembler'#010+
'A*2Aas_assemble using GNU AS'#010+
'P*2Aas_assemble using GNU AS'#010+
@ -762,53 +762,53 @@ const msgtxt : array[0..000162,1..240] of char=(
'**1b_generate browser info'#010+
'**2bl_generate local symbol info'#010+
'**1B_build all modules'#010+
'**1C<x','>_code generation options:'#010+
'**1C<x>','_code generation options:'#010+
'**2Cc<x>_set default calling convention to <x>'#010+
'**2CD_create also dynamic library (not supported)'#010+
'**2Ce_Compilation with emulated floating point opcodes'#010+
'**2Cf<x>_Select fpu instruction set to use, see fpc -i for po','ssible '+
'**2Cf<x>_Select fpu instruction set to use, see fpc -i for pos','sible '+
'values'#010+
'**2Cg_Generate PIC code'#010+
'**2Ch<n>_<n> bytes heap (between 1023 and 67107840)'#010+
'**2Ci_IO-checking'#010+
'**2Cn_omit linking stage'#010+
'**2Co_check overflow of integer operations'#010+
'**2Cp<x>_select instruction set, see fpc -i for possible values'#010,
'**2Cr_range checking'#010+
'**2Cp<x>_select instruction set, see fpc -i for possible values'#010+
'*','*2Cr_range checking'#010+
'**2CR_verify object method call validity'#010+
'**2Cs<n>_set stack size to <n>'#010+
'**2Ct_stack checking'#010+
'**2CX_create also smartlinked library'#010+
'**1d<x>_defines the symbol <x>'#010+
'**1D_generate a DEF file'#010+
'**2Dd<x>_set description to <x>'#010,
'**2Dv<x>_set DLL version to <x>'#010+
'**2Dd<x>_set description to <x>'#010+
'*','*2Dv<x>_set DLL version to <x>'#010+
'*O2Dw_PM application'#010+
'**1e<x>_set path to executable'#010+
'**1E_same as -Cn'#010+
'**1F<x>_set file names and paths:'#010+
'**2Fa<x>[,y]_for a program load first units <x> and [y] before uses is'+
' parsed'#010+
'**2Fc<x>_sets input codepag','e to <x>'#010+
'**2Fc<x>_sets input codepage',' to <x>'#010+
'**2FD<x>_sets the directory where to search for compiler utilities'#010+
'**2Fe<x>_redirect error output to <x>'#010+
'**2FE<x>_set exe/unit output path to <x>'#010+
'**2Fi<x>_adds <x> to include path'#010+
'**2Fl<x>_adds <x> to library path'#010+
'**2FL<x>_uses <x>',' as dynamic linker'#010+
'**2FL<x>_uses <x> ','as dynamic linker'#010+
'**2Fo<x>_adds <x> to object path'#010+
'**2Fr<x>_load error message file <x>'#010+
'**2Fu<x>_adds <x> to unit path'#010+
'**2FU<x>_set unit output path to <x>, overrides -FE'#010+
'*g1g_generate debugger information:'#010+
'*g2gc_generate checks for pointe','rs'#010+
'*g2gc_generate checks for pointer','s'#010+
'*g2gd_use dbx'#010+
'*g2gg_use gsym'#010+
'*g2gh_use heap trace unit (for memory leak debugging)'#010+
'*g2gl_use line info unit to show more info for backtraces'#010+
'*g2gv_generates programs tracable with valgrind'#010+
'*g2gw_generate dwarf debugging info'#010+
'**1i_informa','tion'#010+
'**1i_informat','ion'#010+
'**2iD_return compiler date'#010+
'**2iV_return compiler version'#010+
'**2iSO_return compiler OS'#010+
@ -816,76 +816,76 @@ const msgtxt : array[0..000162,1..240] of char=(
'**2iTO_return target OS'#010+
'**2iTP_return target processor'#010+
'**1I<x>_adds <x> to include path'#010+
'**1k<x>_Pass <x> to the linker'#010,
'**1l_write logo'#010+
'**1k<x>_Pass <x> to the linker'#010+
'*','*1l_write logo'#010+
'**1M<x>_set language mode to <x>'#010+
'**2Mfpc_free pascal dialect (default)'#010+
'**2Mobjfpc_switch some Delphi 2 extensions on'#010+
'**2Mdelphi_tries to be Delphi compatible'#010+
'**2Mtp_tries to be TP/BP 7.0 compatible'#010+
'**2Mgpc_tries to be gpc co','mpatible'#010+
'**2Mgpc_tries to be gpc com','patible'#010+
'**2Mmacpas_tries to be compatible to the macintosh pascal dialects'#010+
'**1n_don'#039't read the default config file'#010+
'**1N<x>node tree optimizations'#010+
'**2Nu_unroll loops'#010+
'**1o<x>_change the name of the executable produced to <x>'#010+
'**1O<x>_optimiza','tions:'#010+
'**1O<x>_optimizat','ions:'#010+
'3*2Og_generate smaller code'#010+
'3*2OG_generate faster code (default)'#010+
'**2Or_keep certain variables in registers'#010+
'3*2Ou_enable uncertain optimizations (see docs)'#010+
'3*2O1_level 1 optimizations (quick optimizations)'#010+
'3*2O2_level 2 optimizations ','(-O1 + slower optimizations)'#010+
'3*2O2_level 2 optimizations (','-O1 + slower optimizations)'#010+
'3*2O3_level 3 optimizations (-O2 repeatedly, max 5 times)'#010+
'3*2Op<x>_target processor:'#010+
'3*3Op1_set target processor to 386/486'#010+
'3*3Op2_set target processor to Pentium/PentiumMMX (tm)'#010+
'3*3Op3_set target processor to P','Pro/PII/c6x86/K6 (tm)'#010+
'3*3Op3_set target processor to PP','ro/PII/c6x86/K6 (tm)'#010+
'6*2Og_generate smaller code'#010+
'6*2OG_generate faster code (default)'#010+
'6*2Ox_optimize maximum (still BUGGY!!!)'#010+
'6*2O0_set target processor to a MC68000'#010+
'6*2O2_set target processor to a MC68020+ (default)'#010+
'**1pg_generate profile',' code for gprof (defines FPC_PROFILE)'#010+
'**1pg_generate profile ','code for gprof (defines FPC_PROFILE)'#010+
'**1R<x>_assembler reading style:'#010+
'**2Rdefault_use default assembler'#010+
'3*2Ratt_read AT&T style assembler'#010+
'3*2Rintel_read Intel style assembler'#010+
'6*2RMOT_read motorola style assembler'#010+
'**1S<x>_syntax options:'#010+
'**','2S2_same as -Mobjfpc'#010+
'**2','S2_same as -Mobjfpc'#010+
'**2Sc_supports operators like C (*=,+=,/= and -=)'#010+
'**2Sa_include assertion code.'#010+
'**2Sd_same as -Mdelphi'#010+
'**2Se<x>_error options. <x> is a combination of the following:'#010+
'**3*_<n> : compiler stops after the <n> errors (defau','lt is 1)'#010+
'**3*_<n> : compiler stops after the <n> errors (defaul','t is 1)'#010+
'**3*_w : compiler stops also after warnings'#010+
'**3*_n : compiler stops also after notes'#010+
'**3*_h : compiler stops also after hints'#010+
'**2Sg_allow LABEL and GOTO'#010+
'**2Sh_Use ansistrings'#010+
'**2Si_support C++ styled INLINE'#010+
'**2SI<x>_set interface s','tyle to <x>'#010+
'**2SI<x>_set interface st','yle to <x>'#010+
'**3SIcom_COM compatible interface (default)'#010+
'**3SIcorba_CORBA compatible interface'#010+
'**2Sm_support macros like C (global)'#010+
'**2So_same as -Mtp'#010+
'**2Sp_same as -Mgpc'#010+
'**2Ss_constructor name must be init (destructor must be done)'#010+
'**2St_al','low static keyword in objects'#010+
'**2St_all','ow static keyword in objects'#010+
'**1s_don'#039't call assembler and linker'#010+
'**2sh_Generate script to link on host'#010+
'**2st_Generate script to link on target'#010+
'**2sr_Skip register allocation phase (use with -alr)'#010+
'**1T<x>_Target operating system:'#010+
'3*2Temx_O','S/2 via EMX (including EMX/RSX extender)'#010+
'3*2Temx_OS','/2 via EMX (including EMX/RSX extender)'#010+
'3*2Tfreebsd_FreeBSD'#010+
'3*2Tgo32v2_Version 2 of DJ Delorie DOS extender'#010+
'3*2Tlinux_Linux'#010+
'3*2Tnetbsd_NetBSD'#010+
'3*2Tnetware_Novell Netware Module (clib)'#010+
'3*2Tnetwlibc_Novell Netware Module (libc)'#010+
'3*2Topenbsd_Op','enBSD'#010+
'3*2Topenbsd_Ope','nBSD'#010+
'3*2Tos2_OS/2 / eComStation'#010+
'3*2Tsunos_SunOS/Solaris'#010+
'3*2Twatcom_Watcom compatible DOS extender'#010+
@ -894,7 +894,7 @@ const msgtxt : array[0..000162,1..240] of char=(
'3*2Twince_Windows CE'#010+
'4*2Tlinux_Linux'#010+
'6*2Tamiga_Commodore Amiga'#010+
'6*2Tatari_Atari ST/STe/T','T'#010+
'6*2Tatari_Atari ST/STe/TT',#010+
'6*2Tlinux_Linux-68k'#010+
'6*2Tmacos_Macintosh m68k (not supported)'#010+
'6*2Tpalmos_PalmOS'#010+
@ -903,7 +903,7 @@ const msgtxt : array[0..000162,1..240] of char=(
'P*2Tdarwin_Darwin and MacOS X on PowerPC'#010+
'P*2Tlinux_Linux on PowerPC'#010+
'P*2Tmacos_MacOS (classic) on PowerPC'#010+
'P*2Tmorphos_Morph','OS'#010+
'P*2Tmorphos_MorphO','S'#010+
'S*2Tlinux_Linux'#010+
'**1u<x>_undefines the symbol <x>'#010+
'**1U_unit options:'#010+
@ -911,42 +911,42 @@ const msgtxt : array[0..000162,1..240] of char=(
'**2Ur_generate release unit files'#010+
'**2Us_compile a system unit'#010+
'**1v<x>_Be verbose. <x> is a combination of the following letters:'#010+
'**2*_e :',' Show errors (default) 0 : Show nothing (except errors'+
'**2*_e : ','Show errors (default) 0 : Show nothing (except errors'+
')'#010+
'**2*_w : Show warnings u : Show unit info'#010+
'**2*_n : Show notes t : Show tried/used files'#010+
'**2*_h : Show hints c : Show conditionals'#010,
'**2*_i : Show general info d : Show debug info'#010+
'**2*_h : Show hints c : Show conditionals'#010+
'*','*2*_i : Show general info d : Show debug info'#010+
'**2*_l : Show linenumbers r : Rhide/GCC compatibility mode'#010+
'**2*_a : Show everything x : Executable info (Win32 only)'#010+
'**2*_v : write fpcdebug.txt with p : Wr','ite tree.log with parse t'+
'**2*_v : write fpcdebug.txt with p : Wri','te tree.log with parse t'+
'ree'#010+
'**2*_ lots of debugging info'#010+
'3*1W<x>_Win32-like target options'#010+
'3*2WB_Create a relocatable image'#010+
'3*2WB<x>_Set Image base to Hexadecimal <x> value'#010+
'3*2WC_Specify console type application'#010+
'3*2WD_Use DEFFILE to exp','ort functions of DLL or EXE'#010+
'3*2WD_Use DEFFILE to expo','rt functions of DLL or EXE'#010+
'3*2WF_Specify full-screen type application (OS/2 only)'#010+
'3*2WG_Specify graphic type application'#010+
'3*2WN_Do not generate relocation code (necessary for debugging)'#010+
'3*2WR_Generate relocation code'#010+
'P*2WC_Specify console t','ype application (MacOS only)'#010+
'P*2WC_Specify console ty','pe application (MacOS only)'#010+
'P*2WG_Specify graphic type application (MacOS only)'#010+
'P*2WT_Specify tool type application (MPW tool, MacOS only)'#010+
'**1X_executable options:'#010+
'**2Xc_pass --shared to the linker (Unix only)'#010+
'**2Xd_don'#039't use standard libr','ary search path (needed for cross c'+
'**2Xd_don'#039't use standard libra','ry search path (needed for cross c'+
'ompile)'#010+
'**2XD_try to link units dynamic (defines FPC_LINK_DYNAMIC)'#010+
'**2Xm_generate link map'#010+
'**2XM<x>_set the name of the '#039'main'#039' program routine (default i'+
's '#039'main'#039')'#010+
'**2XP<x>_prepend the binutils nam','es with the prefix <x>'#010+
'**2XP<x>_prepend the binutils name','s with the prefix <x>'#010+
'**2Xr<x>_set library search path to <x> (needed for cross compile)'#010+
'**2Xs_strip all symbols from executable'#010+
'**2XS_try to link units static (default) (defines FPC_LINK_STATIC)'#010+
'**2Xt_link with static libraries (-static i','s passed to linker)'#010+
'**2Xt_link with static libraries (-static is',' passed to linker)'#010+
'**2XX_try to link units smart (defines FPC_LINK_SMART)'#010+
'**1*_'#010+
'**1?_shows this help'#010+

View File

@ -48,7 +48,7 @@ interface
{ only implements "muln" nodes, the rest always has to be done in }
{ the code generator for performance reasons (JM) }
function first_add64bitint: tnode; virtual;
{$ifdef cpufpemu}
{ This routine calls internal runtime library helpers
for all floating point arithmetic in the case
where the emulation switches is on. Otherwise
@ -56,7 +56,6 @@ interface
the code generation phase.
}
function first_addfloat : tnode; virtual;
{$endif cpufpemu}
end;
taddnodeclass = class of taddnode;
@ -1789,8 +1788,7 @@ implementation
end;
{$ifdef cpufpemu}
function taddnode.first_addfloat: tnode;
function taddnode.first_addfloat : tnode;
var
procname: string[31];
temp: tnode;
@ -1806,43 +1804,103 @@ implementation
if not (cs_fp_emulation in aktmoduleswitches) then
exit;
case nodetype of
addn : procname := 'fpc_single_add';
muln : procname := 'fpc_single_mul';
subn : procname := 'fpc_single_sub';
slashn : procname := 'fpc_single_div';
ltn : procname := 'fpc_single_lt';
lten: procname := 'fpc_single_le';
gtn:
begin
procname := 'fpc_single_le';
notnode := true;
if not(target_info.system in system_wince) then
begin
case tfloatdef(resulttype.def).typ of
s32real:
procname:='float32';
s64real:
procname:='float64';
{!!! not yet implemented
s128real:
}
else
internalerror(2005082601);
end;
gten:
begin
procname := 'fpc_single_lt';
notnode := true;
case nodetype of
addn:
procname:=procname+'_add';
muln:
procname:=procname+'_mul';
subn:
procname:=procname+'_sub';
slashn:
procname:=procname+'_div';
ltn:
procname:=procname+'_lt';
lten:
procname:=procname+'_le';
gtn:
begin
procname:=procname+'_le';
notnode:=true;
end;
gten:
begin
procname:=procname+'_lt';
notnode:=true;
end;
equaln:
procname:=procname+'_eq';
unequaln:
begin
procname:=procname+'_eq';
notnode:=true;
end;
else
CGMessage3(type_e_operator_not_supported_for_types,node2opstr(nodetype),left.resulttype.def.typename,right.resulttype.def.typename);
end;
equaln: procname := 'fpc_single_eq';
unequaln :
begin
procname := 'fpc_single_eq';
notnode := true;
end
else
begin
case nodetype of
addn:
procname:='add';
muln:
procname:='mul';
subn:
procname:='sub';
slashn:
procname:='div';
ltn:
procname:='lt';
lten:
procname:='le';
gtn:
procname:='gt';
gten:
procname:='ge';
equaln:
procname:='eq';
unequaln:
procname:='ne';
else
CGMessage3(type_e_operator_not_supported_for_types,node2opstr(nodetype),left.resulttype.def.typename,right.resulttype.def.typename);
end;
else
CGMessage3(type_e_operator_not_supported_for_types,node2opstr(nodetype),left.resulttype.def.typename,right.resulttype.def.typename);
end;
{ convert the arguments (explicitely) to fpc_normal_set's }
result := ccallnode.createintern(procname,ccallparanode.create(right,
case tfloatdef(resulttype.def).typ of
s32real:
procname:=procname+'s';
s64real:
procname:=procname+'d';
{!!! not yet implemented
s128real:
}
else
internalerror(2005082602);
end;
end;
result:=ccallnode.createintern(procname,ccallparanode.create(right,
ccallparanode.create(left,nil)));
left:=nil;
right:=nil;
{ do we need to reverse the result }
if notnode then
result := cnotnode.create(result);
result:=cnotnode.create(result);
end;
{$endif cpufpemu}
function taddnode.pass_1 : tnode;
@ -1871,9 +1929,12 @@ implementation
if nodetype=slashn then
begin
{$ifdef cpufpemu}
result := first_addfloat;
if assigned(result) then
exit;
if (aktfputype=fpu_soft) or (cs_fp_emulation in aktmoduleswitches) then
begin
result:=first_addfloat;
if assigned(result) then
exit;
end;
{$endif cpufpemu}
expectloc:=LOC_FPUREGISTER;
{ maybe we need an integer register to save }
@ -2076,9 +2137,12 @@ implementation
else if (rd.deftype=floatdef) or (ld.deftype=floatdef) then
begin
{$ifdef cpufpemu}
result := first_addfloat;
if assigned(result) then
exit;
if (aktfputype=fpu_soft) or (cs_fp_emulation in aktmoduleswitches) then
begin
result:=first_addfloat;
if assigned(result) then
exit;
end;
{$endif cpufpemu}
if nodetype in [addn,subn,muln,andn,orn,xorn] then
expectloc:=LOC_FPUREGISTER

View File

@ -138,7 +138,7 @@ implementation
location_force_reg(exprasmlist,left.location,def_cgsize(left.resulttype.def),false);
{ Handle Floating point types differently }
if left.resulttype.def.deftype=floatdef then
if (left.resulttype.def.deftype=floatdef) and not(cs_fp_emulation in aktmoduleswitches) then
begin
{$ifdef i386}
if tempcgpara.location^.loc<>LOC_REFERENCE then

View File

@ -1856,11 +1856,48 @@ implementation
function ttypeconvnode.first_real_to_real : tnode;
begin
first_real_to_real:=nil;
{ comp isn't a floating type }
if registersfpu<1 then
registersfpu:=1;
expectloc:=LOC_FPUREGISTER;
{$ifdef cpufpemu}
if cs_fp_emulation in aktmoduleswitches then
begin
if target_info.system in system_wince then
begin
case tfloatdef(left.resulttype.def).typ of
s32real:
case tfloatdef(resulttype.def).typ of
s64real:
result:=ccallnode.createintern('stod',ccallparanode.create(left,nil));
else
internalerror(2005082704);
end;
s64real:
case tfloatdef(resulttype.def).typ of
s32real:
result:=ccallnode.createintern('dtos',ccallparanode.create(left,nil));
else
internalerror(2005082703);
end;
else
internalerror(2005082702);
end;
left:=nil;
firstpass(result);
exit;
end
else
begin
{!! FIXME }
internalerror(2005082701);
end;
end
else
{$endif cpufpemu}
begin
first_real_to_real:=nil;
{ comp isn't a floating type }
if registersfpu<1 then
registersfpu:=1;
expectloc:=LOC_FPUREGISTER;
end;
end;

View File

@ -647,50 +647,92 @@ implementation
{ overridden by: }
{ i386 }
function tunaryminusnode.pass_1 : tnode;
var
procname: string[31];
temp: tnode;
begin
result:=nil;
firstpass(left);
if codegenerror then
exit;
result:=nil;
firstpass(left);
if codegenerror then
exit;
registersint:=left.registersint;
registersfpu:=left.registersfpu;
if (cs_fp_emulation in aktmoduleswitches) and (left.resulttype.def.deftype=floatdef) then
begin
if not(target_info.system in system_wince) then
begin
case tfloatdef(resulttype.def).typ of
s32real:
procname:='float32_sub';
s64real:
procname:='float64_sub';
{!!! not yet implemented
s128real:
}
else
internalerror(2005082801);
end;
result:=ccallnode.createintern(procname,ccallparanode.create(crealconstnode.create(0,resulttype),
ccallparanode.create(left,nil)));
end
else
begin
case tfloatdef(resulttype.def).typ of
s32real:
procname:='negs';
s64real:
procname:='negd';
{!!! not yet implemented
s128real:
}
else
internalerror(2005082802);
end;
result:=ccallnode.createintern(procname,ccallparanode.create(left,nil));
end;
left:=nil;
end
else
begin
registersint:=left.registersint;
registersfpu:=left.registersfpu;
{$ifdef SUPPORT_MMX}
registersmmx:=left.registersmmx;
registersmmx:=left.registersmmx;
{$endif SUPPORT_MMX}
if (left.resulttype.def.deftype=floatdef) then
begin
if (left.expectloc<>LOC_REGISTER) and
(registersfpu<1) then
registersfpu:=1;
expectloc:=LOC_FPUREGISTER;
end
if (left.resulttype.def.deftype=floatdef) then
begin
if (left.expectloc<>LOC_REGISTER) and
(registersfpu<1) then
registersfpu:=1;
expectloc:=LOC_FPUREGISTER;
end
{$ifdef SUPPORT_MMX}
else if (cs_mmx in aktlocalswitches) and
is_mmx_able_array(left.resulttype.def) then
begin
if (left.expectloc<>LOC_MMXREGISTER) and
(registersmmx<1) then
registersmmx:=1;
end
else if (cs_mmx in aktlocalswitches) and
is_mmx_able_array(left.resulttype.def) then
begin
if (left.expectloc<>LOC_MMXREGISTER) and
(registersmmx<1) then
registersmmx:=1;
end
{$endif SUPPORT_MMX}
{$ifndef cpu64bit}
else if is_64bit(left.resulttype.def) then
begin
if (left.expectloc<>LOC_REGISTER) and
(registersint<2) then
registersint:=2;
expectloc:=LOC_REGISTER;
end
else if is_64bit(left.resulttype.def) then
begin
if (left.expectloc<>LOC_REGISTER) and
(registersint<2) then
registersint:=2;
expectloc:=LOC_REGISTER;
end
{$endif cpu64bit}
else if (left.resulttype.def.deftype=orddef) then
begin
if (left.expectloc<>LOC_REGISTER) and
(registersint<1) then
registersint:=1;
expectloc:=LOC_REGISTER;
end;
else if (left.resulttype.def.deftype=orddef) then
begin
if (left.expectloc<>LOC_REGISTER) and
(registersint<1) then
registersint:=1;
expectloc:=LOC_REGISTER;
end;
end;
end;

View File

@ -606,7 +606,7 @@ begin
begin
l:=Pos(':=',more);
if l>0 then
set_system_compvar(Copy(more,1,l-1),Copy(more,l+2,255))
set_system_compvar(Copy(more,1,l-1),Copy(more,l+2,255))
else
def_system_macro(more);
end;
@ -2100,6 +2100,10 @@ begin
(cs_profile in initmoduleswitches) then
exclude(initglobalswitches,cs_link_strip);
{ force fpu emulation on arm/wince }
if target_info.system=system_arm_wince then
exclude(initmoduleswitches,cs_fp_emulation);
{$ifdef x86_64}
{$warning HACK: turn off smartlinking}
exclude(initmoduleswitches,cs_create_smart);

View File

@ -487,11 +487,6 @@ implementation
prevent crashes when accessing .owner }
generrorsym.owner:=systemunit;
generrortype.def.owner:=systemunit;
{$ifdef cpufpemu}
{ Floating point emulation unit? }
if (cs_fp_emulation in aktmoduleswitches) then
AddUnit('SoftFpu');
{$endif cpufpemu}
{ Units only required for main module }
{ load heaptrace before any other units especially objpas }
if not(current_module.is_unit) then
@ -505,6 +500,11 @@ implementation
{ Lineinfo unit }
if (cs_gdb_valgrind in aktglobalswitches) then
AddUnit('CMem');
{$ifdef cpufpemu}
{ Floating point emulation unit? }
if (cs_fp_emulation in aktmoduleswitches) then
AddUnit('SoftFpu');
{$endif cpufpemu}
end;
{ Objpas unit? }
if m_objpas in aktmodeswitches then

View File

@ -126,6 +126,8 @@ implementation
{$ifdef cpufpemu}
{ Normal types }
{ we use the same types as without emulator, the only
difference is that direct calls to the emulator are generated
if (cs_fp_emulation in aktmoduleswitches) then
begin
addtype('Single',s32floattype);
@ -136,6 +138,7 @@ implementation
addtype('Extended',pbestrealtype^);
end
else
}
{$endif cpufpemu}
begin
addtype('Single',s32floattype);

View File

@ -1338,7 +1338,7 @@ implementation
{$ifdef x86}
result:=use_sse(self);
{$else x86}
result:=(deftype=floatdef);
result:=(deftype=floatdef) and not(cs_fp_emulation in aktmoduleswitches);
{$endif x86}
end;

View File

@ -1,5 +1,5 @@
#
# Don't edit, this file is generated by FPCMake Version 2.0.0 [2005/08/10]
# Don't edit, this file is generated by FPCMake Version 2.0.0 [2005/08/27]
#
default: all
MAKEFILETARGETS=i386-linux i386-go32v2 i386-win32 i386-os2 i386-freebsd i386-beos i386-netbsd i386-solaris i386-qnx i386-netware i386-openbsd i386-wdosx i386-emx i386-watcom i386-netwlibc i386-wince m68k-linux m68k-freebsd m68k-netbsd m68k-amiga m68k-atari m68k-openbsd m68k-palmos powerpc-linux powerpc-netbsd powerpc-macos powerpc-darwin powerpc-morphos sparc-linux sparc-netbsd sparc-solaris x86_64-linux x86_64-freebsd x86_64-win64 arm-linux arm-wince
@ -236,6 +236,7 @@ PACKAGEDIR_MAIN:=$(firstword $(subst /Makefile.fpc,,$(strip $(wildcard $(addsuff
RTL=..
INC=$(RTL)/inc
PROCINC=$(RTL)/$(CPU_TARGET)
WININC=wininc
UNITPREFIX=rtl
SYSTEMUNIT=system
PRT0=wprt0
@ -245,112 +246,112 @@ endif
OBJPASDIR=$(RTL)/objpas
GRAPHDIR=$(INC)/graph
ifeq ($(FULL_TARGET),i386-linux)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),i386-go32v2)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),i386-win32)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),i386-os2)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),i386-freebsd)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),i386-beos)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),i386-netbsd)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),i386-solaris)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),i386-qnx)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),i386-netware)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),i386-openbsd)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),i386-wdosx)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),i386-emx)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),i386-watcom)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),i386-netwlibc)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),i386-wince)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),m68k-linux)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),m68k-freebsd)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),m68k-netbsd)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),m68k-amiga)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),m68k-atari)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),m68k-openbsd)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),m68k-palmos)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),powerpc-linux)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),powerpc-netbsd)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),powerpc-macos)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),powerpc-darwin)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),powerpc-morphos)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),sparc-linux)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),sparc-netbsd)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),sparc-solaris)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),x86_64-linux)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),x86_64-freebsd)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),x86_64-win64)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),arm-linux)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),arm-wince)
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings rtlconsts sysconst
override TARGET_UNITS+=$(SYSTEMUNIT) objpas strings windows rtlconsts sysconst
endif
ifeq ($(FULL_TARGET),i386-linux)
override TARGET_LOADERS+=wprt0 #wdllprt0 gprt0 wcygprt0
@ -1895,11 +1896,13 @@ wdllprt0$(OEXT) : wdllprt0.as
wcygprt0$(OEXT) : wcygprt0.as
$(SYSTEMUNIT)$(PPUEXT) : $(SYSTEMUNIT).pp $(SYSDEPS)
$(COMPILER) -Us -Sg $(SYSTEMUNIT).pp
objpas$(PPUEXT): $(OBJPASDIR)/objpas.pp $(INC)/except.inc $(SYSTEMUNIT)$(PPUEXT)
objpas$(PPUEXT): $(OBJPASDIR)/objpas.pp $(INC)/except.inc $(SYSTEMUNIT)$(PPUEXT) softfpu$(PPUEXT)
$(COMPILER) -I$(OBJPASDIR) $(OBJPASDIR)/objpas.pp
strings$(PPUEXT) : $(INC)/strings.pp $(INC)/stringsi.inc\
$(PROCINC)/strings.inc $(PROCINC)/stringss.inc\
$(SYSTEMUNIT)$(PPUEXT)
windows$(PPUEXT) : windows.pp $(WINDOWS_SOURCE_FILES) $(SYSTEMUNIT)$(PPUEXT)
$(COMPILER) -I$(WININC) windows.pp
rtlconsts$(PPUEXT) : objpas$(PPUEXT) $(OBJPASDIR)/rtlconsts.pp
$(COMPILER) $(OBJPASDIR)/rtlconsts.pp
sysconst$(PPUEXT) : $(OBJPASDIR)/sysconst.pp objpas$(PPUEXT) $(SYSTEMUNIT)$(PPUEXT)

View File

@ -10,7 +10,8 @@ loaders= wprt0 #wdllprt0 gprt0 wcygprt0
units=$(SYSTEMUNIT) objpas strings \
# ctypes macpas
# lineinfo heaptrc matrix \
# windows winsock initc cmem dynlibs signals \
windows \
# winsock initc cmem dynlibs signals \
# dos crt objects graph messages \
rtlconsts sysconst \
# sysutils \
@ -42,7 +43,7 @@ sourcedir=$(INC) $(PROCINC)
RTL=..
INC=$(RTL)/inc
PROCINC=$(RTL)/$(CPU_TARGET)
#WININC=wininc
WININC=wininc
UNITPREFIX=rtl
@ -112,7 +113,7 @@ wcygprt0$(OEXT) : wcygprt0.as
$(SYSTEMUNIT)$(PPUEXT) : $(SYSTEMUNIT).pp $(SYSDEPS)
$(COMPILER) -Us -Sg $(SYSTEMUNIT).pp
objpas$(PPUEXT): $(OBJPASDIR)/objpas.pp $(INC)/except.inc $(SYSTEMUNIT)$(PPUEXT)
objpas$(PPUEXT): $(OBJPASDIR)/objpas.pp $(INC)/except.inc $(SYSTEMUNIT)$(PPUEXT) softfpu$(PPUEXT)
$(COMPILER) -I$(OBJPASDIR) $(OBJPASDIR)/objpas.pp
strings$(PPUEXT) : $(INC)/strings.pp $(INC)/stringsi.inc\
@ -123,8 +124,8 @@ strings$(PPUEXT) : $(INC)/strings.pp $(INC)/stringsi.inc\
# System Dependent Units
#
#windows$(PPUEXT) : windows.pp $(WINDOWS_SOURCE_FILES) $(SYSTEMUNIT)$(PPUEXT)
# $(COMPILER) -I$(WININC) windows.pp
windows$(PPUEXT) : windows.pp $(WINDOWS_SOURCE_FILES) $(SYSTEMUNIT)$(PPUEXT)
$(COMPILER) -I$(WININC) windows.pp
#messages$(PPUEXT): messages.pp $(WININC)/messages.inc $(SYSTEMUNIT)$(PPUEXT)
# $(COMPILER) -I$(WININC) messages.pp

View File

@ -95,21 +95,63 @@ function CreateFile(lpFileName:pchar; dwDesiredAccess:DWORD; dwShareMode:DWORD;
function CreateDirectory(name : pointer;sec : pointer) : longbool; stdcall;
function RemoveDirectory(name:pointer):longbool; stdcall;
function addd(d1,d2 : double) : double; compilerproc;
stdcall;external 'coredll' name '_addd';
function muld(d1,d2 : double) : double; compilerproc;
stdcall;external 'coredll' name '_muld';
function divd(d1,d2 : double) : double; compilerproc;
stdcall;external 'coredll' name '_divd';
function subd(d1,d2 : double) : double; compilerproc;
stdcall;external 'coredll' name '_subd';
function eqs(d1,d2 : single) : boolean; compilerproc;
stdcall;external 'coredll' name '_eqs';
function nes(d1,d2 : single) : boolean; compilerproc;
stdcall;external 'coredll' name '_nes';
function lts(d1,d2 : single) : boolean; compilerproc;
stdcall;external 'coredll' name '_lts';
function gts(d1,d2 : single) : boolean; compilerproc;
stdcall;external 'coredll' name '_gts';
function ges(d1,d2 : single) : boolean; compilerproc;
stdcall;external 'coredll' name '_ges';
function les(d1,d2 : single) : boolean; compilerproc;
stdcall;external 'coredll' name '_les';
function dtos(d : double) : single; compilerproc;
stdcall;external 'coredll' name '_dtos';
function stod(d : single) : double; compilerproc;
stdcall;external 'coredll' name '_stod';
function negs(d : single) : single; compilerproc;
stdcall;external 'coredll' name '_negs';
function negd(d : double) : double; compilerproc;
stdcall;external 'coredll' name '_negd';
function utod(i : dword) : double; compilerproc;
stdcall;external 'coredll' name '_utod';
function itod(i : longint) : double; compilerproc;
stdcall;external 'coredll' name '_itod';
function ui64tod(i : qword) : double; compilerproc;
stdcall;external 'coredll' name '_ui64tod';
function i64tod(i : int64) : double; compilerproc;
stdcall;external 'coredll' name '_i64tod';
implementation
{ used by wstrings.inc because wstrings.inc is included before sysos.inc
this is put here (FK) }
(*
function SysAllocStringLen(psz:pointer;len:dword):pointer;stdcall;
external 'oleaut32.dll' name 'SysAllocStringLen';
procedure SysFreeString(bstr:pointer);stdcall;
external 'oleaut32.dll' name 'SysFreeString';
function SysReAllocStringLen(var bstr:pointer;psz: pointer;
len:dword): Integer; stdcall;external 'oleaut32.dll' name 'SysReAllocStringLen';
*)
function MessageBox(w1:longint;l1,l2:PWideChar;w2:longint):longint;
stdcall;external 'coredll' name 'MessageBoxW';
@ -721,7 +763,7 @@ const
CONTEXT_EXTENDED_REGISTERS = CONTEXT_ARM or $00000020;
CONTEXT_FULL = CONTEXT_CONTROL or CONTEXT_INTEGER or CONTEXT_SEGMENTS;
EXCEPTION_MAXIMUM_PARAMETERS = 15;
NUM_VFP_REGS = 32;
@ -769,10 +811,10 @@ const
CONTEXT_FLOATING_POINT = CONTEXT_X86 or $00000008;
CONTEXT_DEBUG_REGISTERS = CONTEXT_X86 or $00000010;
CONTEXT_EXTENDED_REGISTERS = CONTEXT_X86 or $00000020;
MAXIMUM_SUPPORTED_EXTENSION = 512;
EXCEPTION_MAXIMUM_PARAMETERS = 15;
type
PFloatingSaveArea = ^TFloatingSaveArea;
TFloatingSaveArea = packed record
@ -786,7 +828,7 @@ type
RegisterArea : array[0..79] of Byte;
Cr0NpxState : Cardinal;
end;
PContext = ^TContext;
TContext = packed record
//
@ -868,7 +910,7 @@ end;
function ReadProcessMemory(process : dword;address : pointer;dest : pointer;size : dword;bytesread : pdword) : longbool;
stdcall;external 'coredll' name 'ReadProcessMemory';
function is_prefetch(p : pointer) : boolean;
var
a : array[0..15] of byte;
@ -1046,7 +1088,7 @@ begin
res := 255;
end;
end;
if (res >= 200) and (exceptLevel < MaxExceptionLevel) then begin
exceptEip[exceptLevel] := ContextRecord^.Eip;
exceptError[exceptLevel] := res;