* fixed some small errors/inconsistencies in the wpo messages

git-svn-id: trunk@12450 -

compiler/msg/errore.msg

@@ -2513,11 +2513,11 @@ option_else_without_if=11043_F_In options file $1 at line $2 \var{\#ELSE} direct
 #
 #  Whole program optimization
 #
-# 12004 is the last used one
+# 12019 is the last used one
 #
 # BeginOfTeX
 %
-% \section{Whole program optimisation messages}
+% \section{Whole program optimization messages}
 % This section lists errors that occur when the compiler is performing
 % whole program optimization.
 % \begin{description}
@@ -2546,44 +2546,43 @@ wpo_not_enough_info=12007_E_No collected information necessary to perform "$1" w
 % have to recompile the program using the appropate -OWxxx switch.
 wpo_no_output_specified=12008_F_Specify a whole program optimization feedback file to store the generated info in (using -FW)
 % You have to specify the feedback file in which the compiler has to store the whole program optimization
-% information that is generated during the compilation run. This can be done using the -FW switch.
+% feedback that is generated during the compilation run. This can be done using the -FW switch.
 wpo_output_without_info_gen=12009_E_Not generating any whole program optimization information, yet a feedback file was specified (using -FW)
 % The compiler was instructed to store whole program optimization feedback into a file specified using -FW,
 % but not to actually generated any whole program optimization feedback. The classes of to be
-% generated information can be speciied using -OWxxx
+% generated information can be speciied using -OWxxx.
 wpo_input_without_info_use=12010_E_Not performing any whole program optimizations, yet an input feedback file was specified (using -Fw)
 % The compiler was not instructed to perform any whole program optimizations (no -Owxxx parameters),
 % but nevertheless an input file with such feedback was specified (using -Fwyyy). Since this can
 % indicate that you forgot to specify an -Owxxx parameter, the compiler generates an error in this case.
 wpo_skipping_unnecessary_section=12011_D_Skipping whole program optimization section "$1", because not needed by the requested optimizations
 % The whole program optimization feedback file contains a section with information that is not
-% required by the selected whole program optimizations
+% required by the selected whole program optimizations.
 wpo_duplicate_wpotype=12012_W_Overriding previously read information for "$1" from feedback input file using information in section "$2"
 % The feedback file contains multiple sections that provide the same class of information (e.g.,
 % information about which virtual methods can be devirtualized). In this case, the information in last encountered
-% seciont is used. Turn on debugging output (-vd) to see for each section what class of information
+% section is used. Turn on debugging output (-vd) to see which class of information is provided by each section.
-% it provides.
 wpo_cannot_extract_live_symbol_info_strip=12013_E_Cannot extract symbol liveness information from program when stripping symbols, use -Xs-
 % Certain symbol liveness collectors extract the symbol information from the linked program. If the symbol information
 % is stripped (option -Xs), this is not possible.
-wpo_cannot_extract_live_symbol_info_no_link=12014_E_Cannot extract symbol liveness information from program when when not linking on host
+wpo_cannot_extract_live_symbol_info_no_link=12014_E_Cannot extract symbol liveness information from program when when not linking
-% Certain symbol liveness collectors extract the symbol information from the linked program. If the program does not
+% Certain symbol liveness collectors extract the symbol information from the linked program. If the program is not
-% get linked by the compiler, this is not possible.
+% linked by the compiler, this is not possible.
 wpo_cannot_find_symbol_progs=12015_F_Cannot find "$1" or "$2" to extract symbol liveness information from linked program
 % Certain symbol liveness collectors need a helper program to extract the symbol information from the linked program.
-% This helper program is normally 'nm', which is part of the GNU binutils
+% This helper program is normally 'nm', which is part of the GNU binutils.
 wpo_error_reading_symbol_file=12016_E_Error during reading symbol liveness information produced by "$1"
 % An error occurred during the reading of the symbol liveness file that was generated using the 'nm' or 'objdump' program. The reason
 % can be that it was shorter than expected, or that its format was not understood.
 wpo_error_executing_symbol_prog=12017_F_Error executing "$1" (exitcode: $2) to extract symbol information from linked program
 % Certain symbol liveness collectors need a helper program to extract the symbol information from the linked program.
-% The helper program produced the reported error code when it was ran on the linked program.
+% The helper program produced the reported error code when it was run on the linked program.
 wpo_symbol_live_info_needs_smart_linking=12018_E_Collection of symbol liveness information can only help when using smart linking, use -CX -XX
 % Whether or not a symbol is live is determined by looking whether it exists in the final linked program.
 % Without smart linking/dead code stripping, all symbols are always included, regardless of whether they are
-% actually used or not. So in that case all symbols will be seen as live, even if they are not.
+% actually used or not. So in that case all symbols will be seen as live, which makes this optimization ineffective.
 wpo_cant_create_feedback_file=12019_E_Cannot create specified whole program optimisation feedback file "$1"
-% The compile is unable to create the file specified using the -FW parameter to store the whole program optimisation information in.
+% The compiler is unable to create the file specified using the -FW parameter to store the whole program optimisation information.
 %\end{description}
 # EndOfTeX
 

compiler/msgidx.inc

@@ -779,7 +779,7 @@ const
   option_info=11024;
   option_help_pages=11025;
 
-  MsgTxtSize = 50397;
+  MsgTxtSize = 50389;
 
   MsgIdxMax : array[1..20] of longint=(
     24,87,251,84,65,50,108,22,201,62,

compiler/msgtxt.inc

@@ -877,26 +877,26 @@ const msgtxt : array[0..000209,1..240] of char=(
   '12013_E_Cannot extract symbol liveness information from program when s'+
   'tripping symbols, use -Xs-'#000+
   '12014_E_Cannot extract symbol liveness information',' from program when'+
-  ' when not linking on host'#000+
+  ' when not linking'#000+
   '12015_F_Cannot find "$1" or "$2" to extract symbol liveness informatio'+
   'n from linked program'#000+
   '12016_E_Error during reading symbol liveness information produced by "'+
   '$1"'#000+
-  '12017_F_Error executing "$1" (','exitcode: $2) to extract symbol inform'+
+  '12017_F_Error executing "$1" (exitcode',': $2) to extract symbol inform'+
   'ation from linked program'#000+
   '12018_E_Collection of symbol liveness information can only help when u'+
   'sing smart linking, use -CX -XX'#000+
   '12019_E_Cannot create specified whole program optimisation feedback fi'+
-  'le "','$1"'#000+
+  'le "$1"'#000+
-  '11023_Free Pascal Compiler version $FPCFULLVERSION [$FPCDATE] for $FPC'+
+  '1102','3_Free Pascal Compiler version $FPCFULLVERSION [$FPCDATE] for $F'+
-  'CPU'#010+
+  'PCCPU'#010+
   'Copyright (c) 1993-2008 by Florian Klaempfl'#000+
   '11024_Free Pascal Compiler version $FPCVERSION'#010+
   #010+
   'Compiler Date      : $FPCDATE'#010+
   'Compiler CPU Target: $FPCCPU'#010+
   #010+
-  'Supported ','targets:'#010+
+  'Supported targets:',#010+
   '  $OSTARGETS'#010+
   #010+
   'Supported CPU instruction sets:'#010+
@@ -911,7 +911,7 @@ const msgtxt : array[0..000209,1..240] of char=(
   'Supported Optimizations:'#010+
   '  $OPTIMIZATIONS'#010+
   #010+
-  'Supported Whole Program Optim','izations:'#010+
+  'Supported Whole Program Optimizations',':'#010+
   '  All'#010+
   '  $WPOPTIMIZATIONS'#010+
   #010+
@@ -920,30 +920,30 @@ const msgtxt : array[0..000209,1..240] of char=(
   #010+
   'Report bugs,suggestions etc to:'#010+
   '                 bugs@freepascal.org'#000+
-  '11025_**0*_Put + after a boolean switch ','option to enable it, - to di'+
+  '11025_**0*_Put + after a boolean switch option t','o enable it, - to di'+
   'sable it'#010+
   '**1a_The compiler doesn'#039't delete the generated assembler file'#010+
   '**2al_List sourcecode lines in assembler file'#010+
   '**2an_List node info in assembler file'#010+
-  '*L2ap_Use pipes instead of creating temporary assembler ','files'#010+
+  '*L2ap_Use pipes instead of creating temporary assembler files'#010+
-  '**2ar_List register allocation/release info in assembler file'#010+
+  '**','2ar_List register allocation/release info in assembler file'#010+
   '**2at_List temp allocation/release info in assembler file'#010+
   '**1A<x>_Output format:'#010+
   '**2Adefault_Use default assembler'#010+
   '3*2Aas_Assemble using GNU AS'#010+
-  '3*2Anasmcoff_COFF (Go32v2) f','ile using Nasm'#010+
+  '3*2Anasmcoff_COFF (Go32v2) file usin','g Nasm'#010+
   '3*2Anasmelf_ELF32 (Linux) file using Nasm'#010+
   '3*2Anasmwin32_Win32 object file using Nasm'#010+
   '3*2Anasmwdosx_Win32/WDOSX object file using Nasm'#010+
   '3*2Awasm_Obj file using Wasm (Watcom)'#010+
   '3*2Anasmobj_Obj file using Nasm'#010+
-  '3*2Amasm_Obj file usi','ng Masm (Microsoft)'#010+
+  '3*2Amasm_Obj file using Masm ','(Microsoft)'#010+
   '3*2Atasm_Obj file using Tasm (Borland)'#010+
   '3*2Aelf_ELF (Linux) using internal writer'#010+
   '3*2Acoff_COFF (Go32v2) using internal writer'#010+
   '3*2Apecoff_PE-COFF (Win32) using internal writer'#010+
   '4*2Aas_Assemble using GNU AS'#010+
-  '6*2Aas_Unix o-fi','le using GNU AS'#010+
+  '6*2Aas_Unix o-file using',' GNU AS'#010+
   '6*2Agas_GNU Motorola assembler'#010+
   '6*2Amit_MIT Syntax (old GAS)'#010+
   '6*2Amot_Standard Motorola assembler'#010+
@@ -951,24 +951,24 @@ const msgtxt : array[0..000209,1..240] of char=(
   'P*2Aas_Assemble using GNU AS'#010+
   'S*2Aas_Assemble using GNU AS'#010+
   '**1b_Generate browser info'#010+
-  '**2bl_Generate',' local symbol info'#010+
+  '**2bl_Generate local s','ymbol info'#010+
   '**1B_Build all modules'#010+
   '**1C<x>_Code generation options:'#010+
   '**2Ca<x>_Select ABI, see fpc -i for possible values'#010+
   '**2Cb_Generate big-endian code'#010+
   '**2Cc<x>_Set default calling convention to <x>'#010+
-  '**2CD_Create also dynamic library (','not supported)'#010+
+  '**2CD_Create also dynamic library (not supp','orted)'#010+
   '**2Ce_Compilation with emulated floating point opcodes'#010+
   '**2Cf<x>_Select fpu instruction set to use, see fpc -i for possible va'+
   'lues'#010+
   '**2CF<x>_Minimal floating point constant precision (default, 32, 64)'#010+
   '**2Cg_Generate PIC code'#010+
-  '**','2Ch<n>_<n> bytes heap (between 1023 and 67107840)'#010+
+  '**2Ch<n>_<','n> bytes heap (between 1023 and 67107840)'#010+
   '**2Ci_IO-checking'#010+
   '**2Cn_Omit linking stage'#010+
   '**2Co_Check overflow of integer operations'#010+
   '**2CO_Check for possible overflow of integer operations'#010+
-  '**2Cp<x>_Select instruction set, see fpc -i for ','possible values'#010+
+  '**2Cp<x>_Select instruction set, see fpc -i for possible',' values'#010+
   '**2CP<x>=<y>_ packing settings'#010+
   '**3CPPACKSET=<y>_ <y> set allocation: 0, 1 or DEFAULT or NORMAL, 2, 4 '+
   'and 8'#010+
@@ -976,7 +976,7 @@ const msgtxt : array[0..000209,1..240] of char=(
   '**2CR_Verify object method call validity'#010+
   '**2Cs<n>_Set stack size to <n>'#010+
   '**2Ct_Stack checking'#010+
-  '**2','CX_Create also smartlinked library'#010+
+  '**2CX_Creat','e also smartlinked library'#010+
   '**1d<x>_Defines the symbol <x>'#010+
   '**1D_Generate a DEF file'#010+
   '**2Dd<x>_Set description to <x>'#010+
@@ -984,48 +984,48 @@ const msgtxt : array[0..000209,1..240] of char=(
   '*O2Dw_PM application'#010+
   '**1e<x>_Set path to executable'#010+
   '**1E_Same as -Cn'#010+
-  '**1fPIC_Same as ','-Cg'#010+
+  '**1fPIC_Same as -Cg'#010+
-  '**1F<x>_Set file names and paths:'#010+
+  '**1F','<x>_Set file names and paths:'#010+
   '**2Fa<x>[,y]_(for a program) load units <x> and [y] before uses is par'+
   'sed'#010+
   '**2Fc<x>_Set input codepage to <x>'#010+
   '**2FC<x>_Set RC compiler binary name to <x>'#010+
-  '**2FD<x>_Set the directory where to search for co','mpiler utilities'#010+
+  '**2FD<x>_Set the directory where to search for compiler u','tilities'#010+
   '**2Fe<x>_Redirect error output to <x>'#010+
   '**2Ff<x>_Add <x> to framework path (Darwin only)'#010+
   '**2FE<x>_Set exe/unit output path to <x>'#010+
   '**2Fi<x>_Add <x> to include path'#010+
   '**2Fl<x>_Add <x> to library path'#010+
-  '**2FL<x>_Use <x> as dynamic l','inker'#010+
+  '**2FL<x>_Use <x> as dynamic linker'#010+
-  '**2Fm<x>_Load unicode conversion table from <x>.txt in the compiler di'+
+  '**','2Fm<x>_Load unicode conversion table from <x>.txt in the compiler '+
-  'r'#010+
+  'dir'#010+
   '**2Fo<x>_Add <x> to object path'#010+
   '**2Fr<x>_Load error message file <x>'#010+
   '**2FR<x>_Set resource (.res) linker to <x>'#010+
   '**2Fu<x>_Add <x> to unit path'#010+
-  '**2FU<x>_Set unit ou','tput path to <x>, overrides -FE'#010+
+  '**2FU<x>_Set unit output pat','h to <x>, overrides -FE'#010+
   '**2FW<x>_Store generated whole-program optimization feedback in <x>'#010+
   '**2Fw<x>_Load previously stored whole-program optimization feedback fr'+
   'om <x>'#010+
   '*g1g_Generate debug information (default format for target)'#010+
-  '*g2','gc_Generate checks for pointers'#010+
+  '*g2gc_Gener','ate checks for pointers'#010+
   '*g2gh_Use heaptrace unit (for memory leak/corruption debugging)'#010+
   '*g2gl_Use line info unit (show more info with backtraces)'#010+
   '*g2go<x>_Set debug information options'#010+
-  '*g3godwarfsets_ Enable Dwarf set debug informat','ion (breaks gdb < 6.5'+
+  '*g3godwarfsets_ Enable Dwarf set debug information (bre','aks gdb < 6.5'+
   ')'#010+
   '*g2gp_Preserve case in stabs symbol names'#010+
   '*g2gs_Generate stabs debug information'#010+
   '*g2gt_Trash local variables (to detect uninitialized uses)'#010+
   '*g2gv_Generates programs traceable with valgrind'#010+
-  '*g2gw_Generate dwarf-2 debug',' information (same as -gw2)'#010+
+  '*g2gw_Generate dwarf-2 debug informa','tion (same as -gw2)'#010+
   '*g2gw2_Generate dwarf-2 debug information'#010+
   '*g2gw3_Generate dwarf-3 debug information'#010+
   '**1i_Information'#010+
   '**2iD_Return compiler date'#010+
   '**2iV_Return short compiler version'#010+
   '**2iW_Return full compiler version'#010+
-  '**2iSO_Return',' compiler OS'#010+
+  '**2iSO_Return compile','r OS'#010+
   '**2iSP_Return compiler host processor'#010+
   '**2iTO_Return target OS'#010+
   '**2iTP_Return target processor'#010+
@@ -1033,64 +1033,64 @@ const msgtxt : array[0..000209,1..240] of char=(
   '**1k<x>_Pass <x> to the linker'#010+
   '**1l_Write logo'#010+
   '**1M<x>_Set language mode to <x>'#010+
-  '**2Mfpc_Free Pascal di','alect (default)'#010+
+  '**2Mfpc_Free Pascal dialect (d','efault)'#010+
   '**2Mobjfpc_FPC mode with Object Pascal support'#010+
   '**2Mdelphi_Delphi 7 compatibility mode'#010+
   '**2Mtp_TP/BP 7.0 compatibility mode'#010+
   '**2Mmacpas_Macintosh Pascal dialects compatibility mode'#010+
   '**1n_Do not read the default config files'#010+
-  '**1N','<x>_Node tree optimizations'#010+
+  '**1N<x>_Node',' tree optimizations'#010+
   '**2Nu_Unroll loops'#010+
   '**1o<x>_Change the name of the executable produced to <x>'#010+
   '**1O<x>_Optimizations:'#010+
   '**2O-_Disable optimizations'#010+
   '**2O1_Level 1 optimizations (quick and debugger friendly)'#010+
-  '**2O2_Level 2 optimization','s (-O1 + quick optimizations)'#010+
+  '**2O2_Level 2 optimizations (-O1 +',' quick optimizations)'#010+
   '**2O3_Level 3 optimizations (-O2 + slow optimizations)'#010+
   '**2Oa<x>=<y>_Set alignment'#010+
   '**2Oo[NO]<x>_Enable or disable optimizations, see fpc -i for possible '+
   'values'#010+
-  '**2Op<x>_Set target cpu for optimizing, see fpc -i ','for possible valu'+
+  '**2Op<x>_Set target cpu for optimizing, see fpc -i for poss','ible valu'+
   'es'#010+
   '**2OW<x>_Generate whole-program optimization feedback for optimization'+
   ' <x>, see fpc -i for possible values'#010+
   '**2Ow<x>_Perform whole-program optimization <x>, see fpc -i for possib'+
   'le values'#010+
-  '**2Os_Optimize for size rather th','an speed'#010+
+  '**2Os_Optimize for size rather than speed',#010+
   '**1pg_Generate profile code for gprof (defines FPC_PROFILE)'#010+
   '**1R<x>_Assembler reading style:'#010+
   '**2Rdefault_Use default assembler for target'#010+
   '3*2Ratt_Read AT&T style assembler'#010+
   '3*2Rintel_Read Intel style assembler'#010+
-  '6*2RMOT_Read motorola ','style assembler'#010+
+  '6*2RMOT_Read motorola style as','sembler'#010+
   '**1S<x>_Syntax options:'#010+
   '**2S2_Same as -Mobjfpc'#010+
   '**2Sc_Support operators like C (*=,+=,/= and -=)'#010+
   '**2Sa_Turn on assertions'#010+
   '**2Sd_Same as -Mdelphi'#010+
   '**2Se<x>_Error options. <x> is a combination of the following:'#010+
-  '**3*_<n> : Compil','er halts after the <n> errors (default is 1)'#010+
+  '**3*_<n> : Compiler halts',' after the <n> errors (default is 1)'#010+
   '**3*_w : Compiler also halts after warnings'#010+
   '**3*_n : Compiler also halts after notes'#010+
   '**3*_h : Compiler also halts after hints'#010+
   '**2Sg_Enable LABEL and GOTO (default in -Mtp and -Mdelphi)'#010+
-  '**2Sh_Use ','ansistrings by default instead of shortstrings'#010+
+  '**2Sh_Use ansistri','ngs by default instead of shortstrings'#010+
   '**2Si_Turn on inlining of procedures/functions declared as "inline"'#010+
   '**2Sk_Load fpcylix unit'#010+
   '**2SI<x>_Set interface style to <x>'#010+
   '**3SIcom_COM compatible interface (default)'#010+
-  '**3SIcorba_CORBA comp','atible interface'#010+
+  '**3SIcorba_CORBA compatible i','nterface'#010+
   '**2Sm_Support macros like C (global)'#010+
   '**2So_Same as -Mtp'#010+
   '**2Ss_Constructor name must be init (destructor must be done)'#010+
   '**2St_Allow static keyword in objects'#010+
   '**2Sx_Enable exception keywords (default in Delphi/ObjFPC modes)'#010+
-  '**','1s_Do not call assembler and linker'#010+
+  '**1s_Do no','t call assembler and linker'#010+
   '**2sh_Generate script to link on host'#010+
   '**2st_Generate script to link on target'#010+
   '**2sr_Skip register allocation phase (use with -alr)'#010+
   '**1T<x>_Target operating system:'#010+
-  '3*2Temx_OS/2 via EMX (including EMX/RSX ','extender)'#010+
+  '3*2Temx_OS/2 via EMX (including EMX/RSX extender',')'#010+
   '3*2Tfreebsd_FreeBSD'#010+
   '3*2Tgo32v2_Version 2 of DJ Delorie DOS extender'#010+
   '3*2Tlinux_Linux'#010+
@@ -1098,8 +1098,8 @@ const msgtxt : array[0..000209,1..240] of char=(
   '3*2Tnetware_Novell Netware Module (clib)'#010+
   '3*2Tnetwlibc_Novell Netware Module (libc)'#010+
   '3*2Topenbsd_OpenBSD'#010+
-  '3*2Tos2_OS/2 / eComStatio','n'#010+
+  '3*2Tos2_OS/2 / eComStation'#010+
-  '3*2Tsunos_SunOS/Solaris'#010+
+  '3*2Tsu','nos_SunOS/Solaris'#010+
   '3*2Tsymbian_Symbian OS'#010+
   '3*2Twatcom_Watcom compatible DOS extender'#010+
   '3*2Twdosx_WDOSX DOS extender'#010+
@@ -1108,7 +1108,7 @@ const msgtxt : array[0..000209,1..240] of char=(
   '4*2Tlinux_Linux'#010+
   '6*2Tamiga_Commodore Amiga'#010+
   '6*2Tatari_Atari ST/STe/TT'#010+
-  '6*2Tli','nux_Linux/m68k'#010+
+  '6*2Tlinux_Linu','x/m68k'#010+
   '6*2Tmacos_Macintosh m68k (not supported)'#010+
   '6*2Tpalmos_PalmOS'#010+
   'A*2Tlinux_Linux'#010+
@@ -1116,18 +1116,18 @@ const msgtxt : array[0..000209,1..240] of char=(
   'P*2Tamiga_AmigaOS on PowerPC'#010+
   'P*2Tdarwin_Darwin and Mac OS X on PowerPC'#010+
   'P*2Tlinux_Linux on PowerPC'#010+
-  'P*2Tmacos_Mac OS (classic) on P','owerPC'#010+
+  'P*2Tmacos_Mac OS (classic) on PowerPC'#010+
-  'P*2Tmorphos_MorphOS'#010+
+  'P','*2Tmorphos_MorphOS'#010+
   'S*2Tlinux_Linux'#010+
   '**1u<x>_Undefines the symbol <x>'#010+
   '**1U_Unit options:'#010+
   '**2Un_Do not check where the unit name matches the file name'#010+
   '**2Ur_Generate release unit files (never automatically recompiled)'#010+
-  '**2Us_Compile a s','ystem unit'#010+
+  '**2Us_Compile a system un','it'#010+
   '**1v<x>_Be verbose. <x> is a combination of the following letters:'#010+
   '**2*_e : Show errors (default)       0 : Show nothing (except errors)'#010+
   '**2*_w : Show warnings               u : Show unit info'#010+
-  '**2*_n : Show notes                 ',' t : Show tried/used files'#010+
+  '**2*_n : Show notes                  t : Sho','w tried/used files'#010+
   '**2*_h : Show hints                  c : Show conditionals'#010+
   '**2*_i : Show general info           d : Show debug info'#010+
   '**2*_l : Show linenumbers            r : Rhide/GCC compatibility mode'#010+
@@ -1137,60 +1137,61 @@ const msgtxt : array[0..000209,1..240] of char=(
   '**2*_v : Write fpcdebug.txt with     p : Write tree.log with parse tre'+
   'e'#010+
   '**2*_    lots of debugging info      q : Show message numbers'#010+
-  '**2*_m<x>,<y>',' : Don'#039't show messages numbered <x> and <y>'#010+
+  '**2*_m<x>,<y> : Don'#039't',' show messages numbered <x> and <y>'#010+
   '3*1W<x>_Target-specific options (targets)'#010+
   'A*1W<x>_Target-specific options (targets)'#010+
   'P*1W<x>_Target-specific options (targets)'#010+
   'p*1W<x>_Target-specific options (targets)'#010+
-  '3*2Wb_Create a bundle instea','d of a library (Darwin)'#010+
+  '3*2Wb_Create a bundle instead of a l','ibrary (Darwin)'#010+
   'P*2Wb_Create a bundle instead of a library (Darwin)'#010+
   'p*2Wb_Create a bundle instead of a library (Darwin)'#010+
   '3*2WB_Create a relocatable image (Windows)'#010+
   'A*2WB_Create a relocatable image (Windows, Symbian)'#010+
-  '3*2WC_Specify con','sole type application (EMX, OS/2, Windows)'#010+
+  '3*2WC_Specify console typ','e application (EMX, OS/2, Windows)'#010+
   'A*2WC_Specify console type application (Windows)'#010+
   'P*2WC_Specify console type application (Classic Mac OS)'#010+
   '3*2WD_Use DEFFILE to export functions of DLL or EXE (Windows)'#010+
-  'A*2WD_Use DEFFILE to export fu','nctions of DLL or EXE (Windows)'#010+
+  'A*2WD_Use DEFFILE to export functions ','of DLL or EXE (Windows)'#010+
   '3*2We_Use external resources (Darwin)'#010+
   'P*2We_Use external resources (Darwin)'#010+
   'p*2We_Use external resources (Darwin)'#010+
   '3*2WF_Specify full-screen type application (EMX, OS/2)'#010+
-  '3*2WG_Specify graphic type application ','(EMX, OS/2, Windows)'#010+
+  '3*2WG_Specify graphic type application (EMX, OS','/2, Windows)'#010+
   'A*2WG_Specify graphic type application (Windows)'#010+
   'P*2WG_Specify graphic type application (Classic Mac OS)'#010+
   '3*2Wi_Use internal resources (Darwin)'#010+
   'P*2Wi_Use internal resources (Darwin)'#010+
-  'p*2Wi_Use internal resources (Darwin)'#010,
+  'p*2Wi_Use internal resources (Darwin)'#010+
-  '3*2WN_Do not generate relocation code, needed for debugging (Windows)'#010+
+  '3*2WN_Do',' not generate relocation code, needed for debugging (Windows'+
+  ')'#010+
   'A*2WN_Do not generate relocation code, needed for debugging (Windows)'#010+
   '3*2WR_Generate relocation code (Windows)'#010+
   'A*2WR_Generate relocation code (Windows)'#010+
-  'P*2WT_Specify MPW ','tool type application (Classic Mac OS)'#010+
+  'P*2WT_Specify MPW tool typ','e application (Classic Mac OS)'#010+
   '3*2WX_Enable executable stack (Linux)'#010+
   'A*2WX_Enable executable stack (Linux)'#010+
   'p*2WX_Enable executable stack (Linux)'#010+
   'P*2WX_Enable executable stack (Linux)'#010+
   '**1X_Executable options:'#010+
-  '**2Xc_Pass --shared/-dyn','amic to the linker (BeOS, Darwin, FreeBSD, L'+
+  '**2Xc_Pass --shared/-dynamic to ','the linker (BeOS, Darwin, FreeBSD, L'+
   'inux)'#010+
   '**2Xd_Do not use standard library search path (needed for cross compil'+
   'e)'#010+
   '**2Xe_Use external linker'#010+
   '**2Xg_Create debuginfo in a separate file and add a debuglink section '+
   'to executable'#010+
-  '**2XD_T','ry to link units dynamically      (defines FPC_LINK_DYNAMIC)'#010+
+  '**2XD_Try to li','nk units dynamically      (defines FPC_LINK_DYNAMIC)'#010+
   '**2Xi_Use internal linker'#010+
   '**2Xm_Generate link map'#010+
   '**2XM<x>_Set the name of the '#039'main'#039' program routine (default i'+
   's '#039'main'#039')'#010+
   '**2XP<x>_Prepend the binutils names with the prefix <x>'#010+
-  '*','*2Xr<x>_Set library search path to <x> (needed for cross compile) ('+
+  '**2Xr<x>_','Set library search path to <x> (needed for cross compile) ('+
   'BeOS, Linux)'#010+
   '**2XR<x>_Prepend <x> to all linker search paths (BeOS, Darwin, FreeBSD'+
   ', Linux, Mac OS, Solaris)'#010+
   '**2Xs_Strip all symbols from executable'#010+
-  '**2XS_Try to link units ','statically (default, defines FPC_LINK_STATIC'+
+  '**2XS_Try to link units statical','ly (default, defines FPC_LINK_STATIC'+
   ')'#010+
   '**2Xt_Link with static libraries (-static is passed to linker)'#010+
   '**2XX_Try to smartlink units             (defines FPC_LINK_SMART)'#010+