Make macro MIPS/CPUMIPS/MIPS32 common for big endian and little endian mips processors
use MIPSEL* for little endian systems
use MIPSEB* for big endian systems
git-svn-id: trunk@21599 -
that deal with paths/filenames with TPathStr (= ansistring) to prevent
cutting off long paths (no change in speed when compiling the compiler,
1% extra memory usage)
git-svn-id: trunk@21120 -
generate line number information) from longint into cardinal, since it
should never become < 0 (allows catching errors by enabling range
checking)
git-svn-id: trunk@21114 -
(= equivalent of gas .quad), because .llong forces the alignment to
8 bytes and this causes problems with some typed constant records (such
as RTTI)
git-svn-id: trunk@21045 -
to 0 or 1 (section alignment <> alignment of individual data
elements in section on some platforms, such as AIX)
* set constalignmin and varalignmin to 8 bytes for AIX/ppc64
git-svn-id: trunk@21044 -
on AIX. Adding ".align" statements only align relative to the section
start, but does not influence the alignment of the section itself
git-svn-id: trunk@20835 -
o .short/.long/.llong are automatically aligned to 2/4/8 byte multiples
by the AIX assembler (and for compatibility reasons, also by the
GNU assembler when targeting AIX) -> change to .vbyte statements
o .ascii does not allow non-ASCII characters in the AIX assembler
-> change to .byte sequences like gcc on AIX
git-svn-id: trunk@20803 -
of the AVR-specific ifdef'ed variant
o since the only special character we use in mangled names on all platforms
is $, added a new field to tasminfo called "dollarsign" that holds the
character $'s should be replaced with (if it doesn't have to be replaced,
leave it at $)
git-svn-id: trunk@20801 -
* For now placed actual processing of unwind info under {$ifdef TEST_WIN64_UNWIND}, because in the current state it doesn't add much value.
git-svn-id: trunk@19200 -
* tried to fix dbgstabs so that it doesn't emit illegal chars using ReplaceForbiddenChars, however, dbgstabs accesses symbol names quite often, so this failed
git-svn-id: trunk@18972 -
+ parsing of section directive for variables
+ section test
+ write section names in the assembler/binary writers correctly
* allow section only after ; and for embedded targets
git-svn-id: branches/usersections@17154 -
later: the same as i386/darwin, except
a) uses the non-fragile Objective-C ABI/runtime
b) does not require stubs for direct calls/jumps (not required for
i386/darwin under 10.6 and later either, but still generated
there for backwards compatibility)
c) only the same packages are enabled as for ARM/Darwin
d) MacOSAll is compiled specifically for the iPhoneSimulator SDK
This target also defines the symbol "darwin" apart from the target
name "iphonesim" for source code compatibility reasons.
git-svn-id: trunk@16065 -
- sort of reverted r14134, which is no longer required after the above
change (new_section() inserts the alignment itself)
* made the tai_section.create() constructor private so it cannot be
called directly anymore
git-svn-id: trunk@15482 -
properties/behaviour of the equivalent of Extended in C (i.e., to
"long double" on i386 and x86_64 platforms that support a 10 byte
long double, and to "double" elsewhere)
git-svn-id: trunk@14912 -
mark_NoLineinfoEnd
* add "no line info" markers for try/except and try/finally internal cleanup
code, so the debugger doesn't jump back and forth between the end and start
of exception blocks when you arrive at the end
* honour "no line info" markers in dbgdwarf.pas
git-svn-id: trunk@14327 -
-- Zusammenführen der Unterschiede zwischen Projektarchiv-URLs in ».«:
U rtl/arm/setjump.inc
A rtl/arm/thumb2.inc
U rtl/arm/divide.inc
A rtl/embedded/arm/stm32f103.pp
U rtl/inc/system.inc
U compiler/alpha/cgcpu.pas
U compiler/sparc/cgcpu.pas
U compiler/i386/cgcpu.pas
U compiler/ncgld.pas
U compiler/powerpc/cgcpu.pas
U compiler/avr/cgcpu.pas
U compiler/aggas.pas
U compiler/powerpc64/cgcpu.pas
U compiler/x86_64/cgcpu.pas
U compiler/cgobj.pas
U compiler/psystem.pas
U compiler/aasmtai.pas
U compiler/m68k/cgcpu.pas
U compiler/ncgutil.pas
U compiler/rautils.pas
U compiler/arm/raarmgas.pas
U compiler/arm/armatts.inc
U compiler/arm/cgcpu.pas
U compiler/arm/armins.dat
U compiler/arm/rgcpu.pas
U compiler/arm/cpubase.pas
U compiler/arm/agarmgas.pas
U compiler/arm/cpuinfo.pas
U compiler/arm/armop.inc
U compiler/arm/narmadd.pas
U compiler/arm/aoptcpu.pas
U compiler/arm/armatt.inc
U compiler/arm/aasmcpu.pas
U compiler/systems/t_embed.pas
U compiler/psub.pas
U compiler/options.pas
git-svn-id: trunk@13801 -
* the objc unit links against the Foundation instead of against the Cocoa
framework, and inludes an interface to either the fragile or non-fragile
obj-c run time depending on the target platform
+ support for the non-fragile Objective-C runtime/ABI, as used on Mac OS X
for ARM (iPhone) 64 bit (PowerPC/64, x86_64) -- all these targets now
are now also supported for the objectivec1 modeswitch
+ support for private_extern symbol bindings, required for the above
* mark objcclasses that are declared in the implementation section of a
unit as "hidden" (not sure what the effect is, since the Objective-C
runtime does not seem to do anything with this flag)
* enabled all obj-c tests for the newly supported platforms
git-svn-id: branches/objc@13763 -
register required classes:
+ add lazy references to classes referred to in the current unit
+ define reference symbols for classes defined in the current unit
+ add lazy references to parent classes of classes defined in the current
unit
git-svn-id: branches/objc@13679 -
the use of Objective-C 1.0 constructs. Because it is a mode switch, it
can be used cumulatively with every syntax mode. Note that a {$mode xxx}
statement resets all mode switches as well, so you cannot use the
-Mobjectivec1 variant if you have such a statement in a unit. This
modeswitch is currently only enabled for Darwin/PowerPC and Darwin/i386,
as the backend support is not yet implemented for other platforms.
+ implemented selector() statement that can be used to create an Objective-C
selector for the message with the specified *constant* name (in the future,
it will also work for Objective-C method identifiers)
+ added SEL type to the system unit (the selector() statement returns it)
+ added all Objective-C segments to the assembler writers
+ (currently mostly dummy) objc1 unit that is automatically included if the
{$modeswitch objectivec1} statement is used
+ some tests for the selector() statement
git-svn-id: trunk@12870 -
the syntax is exactly the same as for "external", except for
the keyword. It is currently only active for Darwin targets.
It should also work at least for Linux targets, but only with
the GNU assembler (which is why it is not activated there)
+ test for this functionality
git-svn-id: trunk@12009 -
