info with the classname, like is done for Stabs. Not done by default
because otherwise once calling methods from the debugger is implemented,
this would require typing classinstance.classname__methodname
git-svn-id: trunk@14337 -
+ RTL support:
o VFP exceptions are disabled by default on Darwin,
because they cause kernel panics on iPhoneOS 2.2.1 at least
o all denormals are truncated to 0 on Darwin, because disabling
that also causes kernel panics on iPhoneOS 2.2.1 (probably
because otherwise denormals can also cause exceptions)
* set softfloat rounding mode correctly for non-wince/darwin/vfp
targets
+ compiler support: only half the number of single precision
registers is available due to limitations of the register
allocator
+ added a number of comments about why the stackframe on ARM is
set up the way it is by the compiler
+ added regtype and subregtype info to regsets, because they're
also used for VFP registers (+ support in assembler reader)
+ various generic support routines for dealing with floating point
values located in integer registers that have to be transferred to
mm registers (needed for VFP)
* renamed use_sse() to use_vectorfpu() and also use it for
ARM/vfp support
o only superficially tested for Linux (compiler compiled with -Cpvfpv6
-Cfvfpv2 works on a Cortex-A8, no testsuite run performed -- at least
the fpu exception handler still needs to be implemented), Darwin has
been tested more thoroughly
+ added ARMv6 cpu type and made it default for Darwin/ARM
+ ARMv6+ implementations of atomic operations using ldrex/strex
* don't use r9 on Darwin/ARM, as it's reserved under certain
circumstances (don't know yet which ones)
* changed C-test object files for ARM/Darwin to ARMv6 versions
* check in assembler reader that regsets are not empty, because
instructions with a regset operand have undefined behaviour in that
case
* fixed resultdef of tarmtypeconvnode.first_int_to_real in case of
int64->single type conversion
* fixed constant pool locations in case 64 bit constants are generated,
and/or when vfp instructions with limited reach are present
WARNING: when using VFP on an ARMv6 or later cpu, you *must* compile all
code with -Cparmv6 (or higher), or you will get crashes. The reason is
that storing/restoring multiple VFP registers must happen using
different instructions on pre/post-ARMv6.
git-svn-id: trunk@14317 -
+ basic support for Objective-Pascal: objcclass, objcprotocol,
objcselector on all Darwin platforms (ppc32/64, i386, x86_64, ARM),
see http://wiki.freepascal.org/FPC_PasCocoa and
http://wiki.freepascal.org/FPC_PasCocoa/Differences for some dialect
details. Use {$modeswitch objectivec1} to activate
+ Cocoa, iPhone/UIKit and WebKit interfaces for use with the new
syntax mode
git-svn-id: trunk@14068 -
rtl: add enumerators to the basic classes
tests: add enumerators test which compiles and work both by fpc and dcc
compiler:
+ start for-in loop implementation: implement for-in loop for types (enumerations and ranges), strings, arrays and sets. todo: perform type checking, optimize array and string loops - use temp for expression, implement for-in loop for classes
test:
+ add a simple test for the 'for-in' loop
compiler: fix string for-in loop. now it uses a temp variable to store string expression result
complier: fix for-in array loop. use a temp variable for the loop expression only if loop is not an open array loop
complier: continue enumerator implementation:
+ add operator enumerator which give an ability to add enumerator for an existent type (for example to override builtin string enumerator)
+ add class enumerator support via delphi compatible GetEnumerator method + enumerator class/object template (function MoveNext: Boolean; property Current)
+ tests
compiler: fix for-in loop for arrays. delphi does not copy arrays to a temp variable and it is possible to change array during loop. + test
compiler: add reference for the enumerator operator when it is used + another test for operator enumerator for a class
compiler: add reference for the enumerator operator when it is used + another test for operator enumerator for a class
compiler: enumerator directive support:
+ allow to mark methods and properties by 'enumerator MoveNext' and 'enumerator Current' modifiers. Parser checks return types and duplicates.
+ prefer *marked* by enumerator directive methods and properties than GetEnumerator and Current builtin symbols
+ increase ppu version
+ test
rtl: add IEnumerator and IEnumerable interfaces declarations
tests: for-in loop tests:
+ add small comment at the top of test program
compiler: allow 'enumerator MoveNext' for the interface function declaration + test
compiler: move all for-in loop helpers to the nflw unit
compiler: don't allow the compiler to choose the non-valid enumerator operator for the for-in loop
git-svn-id: trunk@14008 -
- compiler: allow message after the *deprecated* keyword
- compiler: raise an internal error if deprecated message is trying to set to a non clear string pointer
git-svn-id: trunk@13997 -
-- Zusammenführen von r13887 in ».«:
A tests/test/tfinal1.pp
U compiler/msgtxt.inc
U compiler/msgidx.inc
U compiler/pdecsub.pas
U compiler/tokens.pas
U compiler/symconst.pas
U compiler/msg/errore.msg
U compiler/utils/ppudump.pp
-- Zusammenführen von r13890 in ».«:
G compiler/msgtxt.inc
G compiler/msgidx.inc
U compiler/nobj.pas
G compiler/msg/errore.msg
-- Zusammenführen von r13891 in ».«:
A tests/test/tfinal2.pp
git-svn-id: trunk@13938 -
from any ordinal constant, and give a warning for this one allowed
conversion like Kylix does (mantis #14713)
* this required calling simplify from typecheckpass in ttypeconvnode for
cord_to_pointer, because this simplification prevents the type checking
from happening (but the typecheck itself also does that simplification)
git-svn-id: trunk@13919 -
-- Zusammenführen von r13884 in ».«:
U compiler/msgtxt.inc
U compiler/msgidx.inc
U compiler/pdecsub.pas
U compiler/pdecobj.pas
U compiler/tokens.pas
U compiler/ppu.pas
U compiler/symconst.pas
U compiler/msg/errore.msg
U compiler/utils/ppudump.pp
-- Zusammenführen von r13885 in ».«:
A tests/test/tsealed1.pp
A tests/test/tabstract1.pp
A tests/test/tsealed2.pp
-- Zusammenführen von r13893 in ».«:
A tests/test/tsealed3.pp
A tests/test/tsealed4.pp
git-svn-id: trunk@13908 -
* don't allow "type x = type y" for objcclass/objcprotocol for now
(would require generating new rtti for the new name)
git-svn-id: branches/objc@13641 -
only the last source file specified will be compiled, not the first one
* also print out both the old and the new source file name to be compiled
when showing that message (to more easily find where the error is)
* give an error if an unknown parameter is used, instead of silently
ignoring it
git-svn-id: trunk@13429 -
starting with a previous 2.3.1 or compiler built from the objc branch
+ added basic objcprotocol support (only for external protocols
currently)
o use in type declaration: "type xp = objcprotocol ... end;"
o when defining a root class that implements it:
"type yc = objcclass(xp) ... end" (note: no support yet
for something like "objcclass(id,xp)" or so)
o when defining a non-root class that implements a protocol:
"type zc = objcclass(nsobject,xp) ... end"
o includes support for "required" and "optional" sections
o no support yet for the objcprotocol(<protocol>) expression
that enables getting a class instance representing the
protocol (e.g., for use with "conformsToProtocol:")
o message names have to specified in protocol declarations,
but if an objcclass implements a protocol, the message names do
not have to be repeated (but if they are, they have to match;
the same goes when overriding inherited methods)
+ allow specifying the external name of Objective-C classes and
protocols, since classes and protocols can have the same name
(and you cannot use the same Pascal identifier in such caseq)
+ added NSObject protocol, and make the NSObject class use it
+ added missing NSObject class methods that have the same name
as instance methods (added "class" name prefix to avoid clashes)
* fixed several cases where the compiler did not treat Objective-C
classes/protocols the same as Object Pascal classes/interfaces
(a.o., forward declarations, alignment, regvars, several type
conversions, ...)
* allow "override" directive in objcclass declarations, and print
a hint if it's forgotten in an external declaration (because it
doesn't really matter there, and may make automated header
conversion harder than necessary) and an error if will be used in
a non-external declaration (because it is not possible to start
a new vmt entry-tree in Objective-C, you can only override parent
methods)
* reject objcclasses/protocols as parameters to typeof()
* don't try to test VMT validity of objcclasses/protocols
git-svn-id: branches/objc@13375 -
can create ambiguities for the parser in case the field names also exist
as modifiers (TP- and Delphi-compatible, mantis #13971) + tests
* fixed tests that broke because of this change
git-svn-id: trunk@13334 -
o support for declaring external Objective-C classes (see
rtl/inc/objcbase.pas), including derived classes
o support for converting methods of objcclasses into selectors
(see tests/test/tobjc1.pp)
o support for loading from/storing to fields of objcclasses
o support for calling Objective-C methods using regular
Object Pascal syntax (see tests/test/tobjc1.pp)
o some things that are known to be not yet working:
o automatic conversion from ID to objcclasses and back
o declaring and implementing new objcclasses/methods in Pascal code
o debug information (objcclasses are currently plain pointers
as far as the debugger knows)
git-svn-id: branches/objc@13162 -
* Warning when 64-bit object file contains 32-bit absolute relocations. In such case an executable image can be loaded into lower 4Gb of address space only.
git-svn-id: trunk@13110 -
work correctly with DWARF)
* only force the internal linker for STABS when generating relocatable
output (rather than for all debugging formats)
git-svn-id: trunk@12917 -
the use of Objective-C 1.0 constructs. Because it is a mode switch, it
can be used cumulatively with every syntax mode. Note that a {$mode xxx}
statement resets all mode switches as well, so you cannot use the
-Mobjectivec1 variant if you have such a statement in a unit. This
modeswitch is currently only enabled for Darwin/PowerPC and Darwin/i386,
as the backend support is not yet implemented for other platforms.
+ implemented selector() statement that can be used to create an Objective-C
selector for the message with the specified *constant* name (in the future,
it will also work for Objective-C method identifiers)
+ added SEL type to the system unit (the selector() statement returns it)
+ added all Objective-C segments to the assembler writers
+ (currently mostly dummy) objc1 unit that is automatically included if the
{$modeswitch objectivec1} statement is used
+ some tests for the selector() statement
git-svn-id: trunk@12870 -
svn+ssh://jonas@svn.freepascal.org/FPC/svn/fpc/branches/wpo
........
r11878 | jonas | 2008-10-11 02:25:18 +0200 (Sat, 11 Oct 2008) | 19 lines
+ initial implementation of whole-program optimisation framework
+ implementation of whole-program devirtualisation
o use:
a) generate whole-program optimisation information (no need
to completely compile the program and all of its units
with -OW/-FW, only the main program is sufficient)
fpc -OWdevirtcalls -FWmyprog.wpo myprog
b) use it to optimise the program
fpc -B -Owdevirtcalls -Fwmyprog.wpo myprog
(the -B is not required, but only sources recompiled during
the second pass will actually be optimised -- if you want,
you can even rebuild the rtl devirtualised for a particular
program; and these options can obviously also be used
together with regular optimisation switches)
o warning:
- there are no checks yet to ensure that you do not use
units optimised for a particular program with another
program (or with a changed version of the same program)
........
r11881 | jonas | 2008-10-11 19:35:52 +0200 (Sat, 11 Oct 2008) | 13 lines
* extracted code to detect constructed class/object types from
tcallnode.gen_vmt_tree into its own method to avoid clutter
* detect x.classtype.create constructs (with classtype = the
system.tobject.classtype method), and treat them as if a
"class of x" has been instantiated rather than a
"class of tobject". this required storing the instantiated
classrefs in their own array though, because at such a
point we don't have a "class of x" tdef available (so
now "x", and all other defs instantiated via a classref,
are now stored as tobjectdefs in a separate array)
+ support for devirtualising class methods (including
constructors)
........
r11882 | jonas | 2008-10-11 20:44:02 +0200 (Sat, 11 Oct 2008) | 7 lines
+ -Owoptvmts whole program optimisation which replaces vmt entries
with method names of child classes in case the current class'
method can never be called (e.g., because this class is never
instantiated). As a result, such methods can then be removed
by dead code removal/smart linking (not much effect for either
the compiler, lazarus or a trivial lazarus app though).
........
r11889 | jonas | 2008-10-12 14:29:54 +0200 (Sun, 12 Oct 2008) | 2 lines
* some comment fixes
........
r11891 | jonas | 2008-10-12 18:49:13 +0200 (Sun, 12 Oct 2008) | 4 lines
* fixed twpofilereader.getnextnoncommentline() when reusing a previously
read line
* fixed skipping of unnecessary wpo feedback file sections
........
r11892 | jonas | 2008-10-12 23:42:43 +0200 (Sun, 12 Oct 2008) | 31 lines
+ symbol liveness wpo information extracted from smartlinked programs
(-OW/-Owsymbolliveness)
+ use symbol liveness information to improve devirtualisation (don't
consider classes created in code that has been dead code stripped).
This requires at least two passes of using wpo (first uses dead code
info to locate classes that are constructed only in dead code,
second pass uses this info to potentially further devirtualise).
I.e.:
1) generate initial liveness and devirtualisation feedback
fpc -FWtt.wpo -OWall tt.pp -Xs- -CX -XX
2) use previously generated feedback, and regenerate new feedback
based on this (i.e., disregard classes created in dead code)
fpc -FWtt-1.wpo -OWall -Fwtt.wo -Owall tt.pp -Xs- -CX -XX
3) use the newly generated feedback (in theory, it is possible
that even more opportunities pop up afterwards; you can
continue until the program does not get smaller anymore)
fpc -Fwtt-1.wpo -Owall tt.pp -CX -XX
* changed all message() to cgmessage() calls so the set codegenerror
* changed static fsectionhandlers field to a regular field called
fwpocomponents
* changed registration of wpocomponents: no longer happens in the
initialization section of their unit, but in the InitWpo routine
(which has been moved from the woinfo to the wpo unit). This way
you can register different classes based on the target/parameters.
+ added static method to twpocomponentbase for checking whether
the command line parameters don't conflict with the requested
optimisations (e.g. generating liveness info requires that
smartlinking is turned on)
+ added static method to twpocomponentbase to request the
section name
........
r11893 | jonas | 2008-10-12 23:53:57 +0200 (Sun, 12 Oct 2008) | 3 lines
* fixed comment error (twpodeadcodeinfo keeps a list of live,
not dead symbols)
........
r11895 | jonas | 2008-10-13 00:13:59 +0200 (Mon, 13 Oct 2008) | 2 lines
+ documented -OW<x>, -Ow<x>, -FW<x> and -Fw<x> wpo parameters
........
r11899 | jonas | 2008-10-14 22:14:56 +0200 (Tue, 14 Oct 2008) | 2 lines
* replaced hardcoded string with objdumpsearchstr constant
........
r11900 | jonas | 2008-10-14 22:15:25 +0200 (Tue, 14 Oct 2008) | 2 lines
* reset wpofeedbackinput and wpofeedbackoutput in wpodone
........
r11901 | jonas | 2008-10-14 22:16:07 +0200 (Tue, 14 Oct 2008) | 2 lines
* various additional comments and comment fixes
........
r11902 | jonas | 2008-10-15 18:09:42 +0200 (Wed, 15 Oct 2008) | 5 lines
* store vmt procdefs in the ppu files so we don't have to use a hack to
regenerate them for whole-program optimisation
* fixed crash when performing devirtualisation optimisation on programs
that do not construct any classes/objects with optimisable vmts
........
r11935 | jonas | 2008-10-19 12:24:26 +0200 (Sun, 19 Oct 2008) | 4 lines
* set the vmt entries of non-class virtual methods of not instantiated
objects/classes to FPC_ABSTRACTERROR so the code they refer to can
be thrown away if it is not referred to in any other way either
........
r11938 | jonas | 2008-10-19 20:55:02 +0200 (Sun, 19 Oct 2008) | 7 lines
* record all classrefdefs/objdefs for which a loadvmtaddrnode is generated,
and instead of marking all classes that derive from instantiated
classrefdefs as instantiated, only mark those classes from the above
collection that derive from instantiated classrefdefs as
instantiated (since to instantiate a class, you have to load its vmt
somehow -- this may be broken by using assembler code though)
........
r12212 | jonas | 2008-11-23 12:26:34 +0100 (Sun, 23 Nov 2008) | 3 lines
* fixed to work with the new vmtentries that are always available and
removed previously added code to save/load vmtentries to ppu files
........
r12304 | jonas | 2008-12-05 22:23:30 +0100 (Fri, 05 Dec 2008) | 4 lines
* check whether the correct wpo feedback file is used in the current
compilation when using units that were compiled using wpo information
during a previous compilation run
........
r12308 | jonas | 2008-12-06 18:03:39 +0100 (Sat, 06 Dec 2008) | 2 lines
* abort compilation if an error occurred during wpo initialisation
........
r12309 | jonas | 2008-12-06 18:04:28 +0100 (Sat, 06 Dec 2008) | 3 lines
* give an error message instead of crashing with an io exception if the
compiler is unable to create the wpo feedback file specified using -FW
........
r12310 | jonas | 2008-12-06 18:12:43 +0100 (Sat, 06 Dec 2008) | 3 lines
* don't let the used wpo feedback file influence the interface crc (there's
a separate check for such changes)
........
r12316 | jonas | 2008-12-08 19:08:25 +0100 (Mon, 08 Dec 2008) | 3 lines
* document the format of the sections of the wpo feedback file inside the
feedback file itself
........
r12330 | jonas | 2008-12-10 22:26:47 +0100 (Wed, 10 Dec 2008) | 2 lines
* use sysutils instead of dos to avoid command line length limits
........
r12331 | jonas | 2008-12-10 22:31:11 +0100 (Wed, 10 Dec 2008) | 3 lines
+ support for testing whole program optimisation tests (multiple
compilations using successively generated feedback files)
........
r12332 | jonas | 2008-12-10 22:31:40 +0100 (Wed, 10 Dec 2008) | 2 lines
+ whole program optimisation tests
........
r12334 | jonas | 2008-12-10 22:38:07 +0100 (Wed, 10 Dec 2008) | 2 lines
- removed unused local variable
........
r12339 | jonas | 2008-12-11 18:06:36 +0100 (Thu, 11 Dec 2008) | 2 lines
+ comments for newly added fields to tobjectdef for devirtualisation
........
r12340 | jonas | 2008-12-11 18:10:01 +0100 (Thu, 11 Dec 2008) | 2 lines
* increase ppu version (was no longer different from trunk due to merging)
........
git-svn-id: trunk@12341 -
* give a note if the visibility of a vmt entry is lower than
the previous (parent) entry
* refactor vmt method collection using the new always available
vmt entries
git-svn-id: trunk@12159 -
