pass on whether the symbol refers to code or data (important for
AIX weak symbols; note that AIX does not support undefined weak
external symbols, and FPC does not yet support weakly defining
non-external symbols, so this functionality isn't really used yet)
git-svn-id: trunk@20802 -
* Modified fpc_ansistr_decr_ref and fpc_widestr_decr_ref so they always zero the pointer passed by reference. Other _decr_ref helpers already do it.
- Removed tcg.g_decrrefcount, calling cg.g_finalize instead.
- finalize_data_node and tcg.g_finalize: removed code generation for zeroing locations, because it is now done by RTL helpers. This further reduces code size.
As a total result of this change and r20118, the size of Lazarus executable is reduced by about 12%.
git-svn-id: trunk@20119 -
* Refactored code generation for tcgonnonde and tcgtryexceptnode, simplifying both compiler and generated code. Merged compilerprocs called in sequence into larger ones (fpc_popobjectstack+fpc_destroyexception -> fpc_doneexception, fpc_popsecondobjectstack+fpc_destroyexception+fpc_reraise -> fpc_raise_nested).
git-svn-id: trunk@19506 -
* Now g_initialize, g_finalize, g_incrrefcount and g_decrrefcount should never more be used for open arrays, trigger internal error if it happens.
git-svn-id: trunk@17137 -
later: the same as i386/darwin, except
a) uses the non-fragile Objective-C ABI/runtime
b) does not require stubs for direct calls/jumps (not required for
i386/darwin under 10.6 and later either, but still generated
there for backwards compatibility)
c) only the same packages are enabled as for ARM/Darwin
d) MacOSAll is compiled specifically for the iPhoneSimulator SDK
This target also defines the symbol "darwin" apart from the target
name "iphonesim" for source code compatibility reasons.
git-svn-id: trunk@16065 -
be used outside the code generator
* renamed tabstractprocdef.requiredargarea into callerargareasize,
and also added calleeargareasize field; added init_paraloc_info(side)
method to init the parameter locations and init those size fields and
replaced all "if not procdef.has_paraloc_info then ..." blocks with
procdef.init_paraloc_info(callersize)"
* moved detection of stack tainting parameters from psub to
symdef/tabstractprocdef
+ added tcallparanode.contains_stack_tainting_call(), which detects
whether a parameter contains a call that makes use of stack paramters
* record for each parameter whether or not any following parameter
contains a call with stack parameters; if not, in case the current
parameter itself is a stack parameter immediately place it in its
final location also for use_fixed_stack platforms rather than
first putting it in a temporary location (part of mantis #17442)
* on use_fixed_stack platforms, always first evaluate parameters
containing a stack tainting call, since those force any preceding
stack parameters of the current call to be stored in a temp location
and copied to the final location afterwards
git-svn-id: trunk@16050 -
as needed, instead of once when initialising the list (currently nothing
else is added to that asmlist so it was safe, but it was not robust)
git-svn-id: trunk@15742 -
(the ABIs that prescribe special treatment for aggregates with one
scalar element don't either, since a "union containing a single scalar"
is not the same as a scalar)
* fixed passing record with a single float field on PowerPC/AIX abi's
* several changes to cgobj and ncgutil to correctly deal with transfering
such records between integer and floating point registers
git-svn-id: trunk@15416 -
x86-64 platforms (except for win64, which uses another ABI and which
already complied to it) + test
* fixed returning records containing 1 single or double field on darwin/i386,
these have to be returned via ST0 instead of as a regular record
* added support for LOC_FPUREGISTER and LOC_MMREGISTER in several places
where they can now occur due to the previous two changes
* made a few internalerrors unique
git-svn-id: trunk@15368 -
represent complex locations (required for full x86-64 ABI support,
which is not yet implemented) -> lots of special result handling
code has been removed and replaced by the parameter handling
routines
+ added support for composite parameters (and hence function
results) to tcg.a_load_ref_cgpara() (so it can be used for
handling, e.g., 64 bit parameters on 32 bit platforms)
* the above fixed writing past the end of allocated memory when
handling records returned in registers on x86-64 whose size is
not a multiple of 8 bytes (mantis #16357)
- removed the x86-64 and PPC specific versions of a_load_ref_cgpara(),
as they are now handled correctly by the generic version
* moved the responsibility of allocating tcgpara cpu registers
(using paramanager.allocparaloc()) from the callers of
cg.a_load*_cgpara() to the cg.a_load*_cgpara() methods
themselves (so the register allocation can be done efficiently
when dealing with function results)
* for the above, renamed paramanager.alloc/freeparaloc() to
paramanager.alloc/freecgpara(), and use paramanager.allocparaloc()
to allocate individual pcgparalocations instead
* fixed the register size of SSE2 function result registers for
x86-64 (when used for floating point), which results in removing
a few superfluous "movs? %xmm0,%xmm0" instructions
* fixed compilation of paramanagers of avr, m68k and mips after r13695
and also updated them for these new changes
git-svn-id: trunk@15350 -
+ RTL support:
o VFP exceptions are disabled by default on Darwin,
because they cause kernel panics on iPhoneOS 2.2.1 at least
o all denormals are truncated to 0 on Darwin, because disabling
that also causes kernel panics on iPhoneOS 2.2.1 (probably
because otherwise denormals can also cause exceptions)
* set softfloat rounding mode correctly for non-wince/darwin/vfp
targets
+ compiler support: only half the number of single precision
registers is available due to limitations of the register
allocator
+ added a number of comments about why the stackframe on ARM is
set up the way it is by the compiler
+ added regtype and subregtype info to regsets, because they're
also used for VFP registers (+ support in assembler reader)
+ various generic support routines for dealing with floating point
values located in integer registers that have to be transferred to
mm registers (needed for VFP)
* renamed use_sse() to use_vectorfpu() and also use it for
ARM/vfp support
o only superficially tested for Linux (compiler compiled with -Cpvfpv6
-Cfvfpv2 works on a Cortex-A8, no testsuite run performed -- at least
the fpu exception handler still needs to be implemented), Darwin has
been tested more thoroughly
+ added ARMv6 cpu type and made it default for Darwin/ARM
+ ARMv6+ implementations of atomic operations using ldrex/strex
* don't use r9 on Darwin/ARM, as it's reserved under certain
circumstances (don't know yet which ones)
* changed C-test object files for ARM/Darwin to ARMv6 versions
* check in assembler reader that regsets are not empty, because
instructions with a regset operand have undefined behaviour in that
case
* fixed resultdef of tarmtypeconvnode.first_int_to_real in case of
int64->single type conversion
* fixed constant pool locations in case 64 bit constants are generated,
and/or when vfp instructions with limited reach are present
WARNING: when using VFP on an ARMv6 or later cpu, you *must* compile all
code with -Cparmv6 (or higher), or you will get crashes. The reason is
that storing/restoring multiple VFP registers must happen using
different instructions on pre/post-ARMv6.
git-svn-id: trunk@14317 -
-- Zusammenführen der Unterschiede zwischen Projektarchiv-URLs in ».«:
U rtl/arm/setjump.inc
A rtl/arm/thumb2.inc
U rtl/arm/divide.inc
A rtl/embedded/arm/stm32f103.pp
U rtl/inc/system.inc
U compiler/alpha/cgcpu.pas
U compiler/sparc/cgcpu.pas
U compiler/i386/cgcpu.pas
U compiler/ncgld.pas
U compiler/powerpc/cgcpu.pas
U compiler/avr/cgcpu.pas
U compiler/aggas.pas
U compiler/powerpc64/cgcpu.pas
U compiler/x86_64/cgcpu.pas
U compiler/cgobj.pas
U compiler/psystem.pas
U compiler/aasmtai.pas
U compiler/m68k/cgcpu.pas
U compiler/ncgutil.pas
U compiler/rautils.pas
U compiler/arm/raarmgas.pas
U compiler/arm/armatts.inc
U compiler/arm/cgcpu.pas
U compiler/arm/armins.dat
U compiler/arm/rgcpu.pas
U compiler/arm/cpubase.pas
U compiler/arm/agarmgas.pas
U compiler/arm/cpuinfo.pas
U compiler/arm/armop.inc
U compiler/arm/narmadd.pas
U compiler/arm/aoptcpu.pas
U compiler/arm/armatt.inc
U compiler/arm/aasmcpu.pas
U compiler/systems/t_embed.pas
U compiler/psub.pas
U compiler/options.pas
git-svn-id: trunk@13801 -
depend on that (and correct a number of cases where this was wrong)
* set the correct subreg type for xmm x86_64 parameter registers
(resolved mantis #14067)
git-svn-id: trunk@13410 -
anything from past the end of the array (it was discarded, but this
can cause crashes if the array lies at the end of a memory block)
-- todo: also for writing
* adapted tparray13 so it checks this on unix platforms
git-svn-id: trunk@12844 -
alignment for each memory reference (mantis #12137, and
test/packages/fcl-registry/tregistry1.pp on sparc). This also
enables better code generation for packed records in many cases.
o several changes were made to the compiler to minimise the chances
of accidentally forgetting to set the alignment of memory references
in the future:
- reference_reset*() now has an extra alignment parameter
- location_reset() can now only be used for non LOC_(C)REFERENCE,
use location_reset_ref() for those (split the tloc enum so the
compiler can catch errors using range checking)
git-svn-id: trunk@12719 -
shortstring temps don't get maximum alignment)
* changed some gettemptyed() calls into gettemp() calls (gettemptyped
means that this temp can only be used for temps of that type,
which is necessary for refcounted types but not for floats)
git-svn-id: trunk@12036 -
the syntax is exactly the same as for "external", except for
the keyword. It is currently only active for Darwin targets.
It should also work at least for Linux targets, but only with
the GNU assembler (which is why it is not activated there)
+ test for this functionality
git-svn-id: trunk@12009 -
