the drawback of this is that get_caller_frame and get_caller_addr might not work
anymore because they make the wrong assumption (i.e. not required by the abi)
that ebp contains always a valid (not necessarily the current) frame pointer
git-svn-id: trunk@21918 -
- i386/cgcpu.pas: removed segment check, rejecting references with segment here is too early. These references are passed to tcgx86.a_loadaddr_ref_reg, which can generate required code for them (or reject if they are not allowed for the target).
- ncgld.pas: removed "not tf_section_threadvars in target_info" condition, it is inverse to one on the following line, making non-generic branch impossible to execute.
+ Define FPC_SECTION_THREADVARS macro if corresponding flag is set for the target.
git-svn-id: trunk@21210 -
- second calculation of EDI is obsolete, its value is never used.
- calculation of ECX can be partially shared with first calculation of EDI.
- multiplying ECX by 1 is also redundant (was happening due to a wrong condition).
git-svn-id: trunk@17260 -
* $CPU/cgcpu.pas: disable the generation of VMT loading code
* dbgstabs.pas, dbgdwarf.pas: treat virtual methods of helpers as normal methods
* ncgcal.pas: don't register virtual helper methods for WPO
* ncgrtti.pas: write virtual helper methods as normal methods to RTTI
* nobj.pas: correctly handle final and override cases in helpers
* pdecvar.pas: property getters
* rautils.pas: no VMT offset in records
git-svn-id: branches/svenbarth/classhelpers@17150 -
- rename tprocdef._class to tprocdef.struct and change the type from tobjectdef to tabstractrecorddef because methods can belong not to classes only now but to records too
- replace in many places use of current_objectdef to current_structdef with typcast where is needed
- add an argument to comp_expr, expr, factor, sub_expr to notify that we are searching type only symbol to solve the problem with records,objects,classes which contains fields with the same name as previosly declared type (like:
HWND = type Handle;
rec = record
hWnd: HWND;
end;)
- disable check in factor_read_id which was made for object that only static fields can be accessed as TObjectType.FieldName outside the object because it makes SizeOf(TObjectType.FieldName) imposible and since the same method was extended to handle records it also breaks a52 package compilation
- rename tcallcandidates.collect_overloads_in_class to tcallcandidates.collect_overloads_in_struct and addapt the code to handle overloads in records too
- fix searchsym_type to search also in object ancestors if we found an object symtable
- add pd_record, pd_notrecord flags to mark procedure modifies which can or can't be used with records. Disallow the next modifiers for records: abstract, dynamic, export, external, far, far16, final, forward, internconst, internproc, interrupt, message, near, override, public, reintroduce, virtual, weakexternal,
Allow the next modifiers for records: static
git-svn-id: branches/paul/extended_records@16526 -
later: the same as i386/darwin, except
a) uses the non-fragile Objective-C ABI/runtime
b) does not require stubs for direct calls/jumps (not required for
i386/darwin under 10.6 and later either, but still generated
there for backwards compatibility)
c) only the same packages are enabled as for ARM/Darwin
d) MacOSAll is compiled specifically for the iPhoneSimulator SDK
This target also defines the symbol "darwin" apart from the target
name "iphonesim" for source code compatibility reasons.
git-svn-id: trunk@16065 -
be used outside the code generator
* renamed tabstractprocdef.requiredargarea into callerargareasize,
and also added calleeargareasize field; added init_paraloc_info(side)
method to init the parameter locations and init those size fields and
replaced all "if not procdef.has_paraloc_info then ..." blocks with
procdef.init_paraloc_info(callersize)"
* moved detection of stack tainting parameters from psub to
symdef/tabstractprocdef
+ added tcallparanode.contains_stack_tainting_call(), which detects
whether a parameter contains a call that makes use of stack paramters
* record for each parameter whether or not any following parameter
contains a call with stack parameters; if not, in case the current
parameter itself is a stack parameter immediately place it in its
final location also for use_fixed_stack platforms rather than
first putting it in a temporary location (part of mantis #17442)
* on use_fixed_stack platforms, always first evaluate parameters
containing a stack tainting call, since those force any preceding
stack parameters of the current call to be stored in a temp location
and copied to the final location afterwards
git-svn-id: trunk@16050 -
shifted all the parameters on the stack. Now the 'self' parameter is
declared as var, not const, restoring its original value is not necessary
anymore
git-svn-id: trunk@15744 -
Darwin/i386, because that's slightly faster on Core Solo and
later CPUs (and it avoid using a non-volatile register when not
required)
git-svn-id: trunk@15532 -
represent complex locations (required for full x86-64 ABI support,
which is not yet implemented) -> lots of special result handling
code has been removed and replaced by the parameter handling
routines
+ added support for composite parameters (and hence function
results) to tcg.a_load_ref_cgpara() (so it can be used for
handling, e.g., 64 bit parameters on 32 bit platforms)
* the above fixed writing past the end of allocated memory when
handling records returned in registers on x86-64 whose size is
not a multiple of 8 bytes (mantis #16357)
- removed the x86-64 and PPC specific versions of a_load_ref_cgpara(),
as they are now handled correctly by the generic version
* moved the responsibility of allocating tcgpara cpu registers
(using paramanager.allocparaloc()) from the callers of
cg.a_load*_cgpara() to the cg.a_load*_cgpara() methods
themselves (so the register allocation can be done efficiently
when dealing with function results)
* for the above, renamed paramanager.alloc/freeparaloc() to
paramanager.alloc/freecgpara(), and use paramanager.allocparaloc()
to allocate individual pcgparalocations instead
* fixed the register size of SSE2 function result registers for
x86-64 (when used for floating point), which results in removing
a few superfluous "movs? %xmm0,%xmm0" instructions
* fixed compilation of paramanagers of avr, m68k and mips after r13695
and also updated them for these new changes
git-svn-id: trunk@15350 -
-- Zusammenführen der Unterschiede zwischen Projektarchiv-URLs in ».«:
U rtl/arm/setjump.inc
A rtl/arm/thumb2.inc
U rtl/arm/divide.inc
A rtl/embedded/arm/stm32f103.pp
U rtl/inc/system.inc
U compiler/alpha/cgcpu.pas
U compiler/sparc/cgcpu.pas
U compiler/i386/cgcpu.pas
U compiler/ncgld.pas
U compiler/powerpc/cgcpu.pas
U compiler/avr/cgcpu.pas
U compiler/aggas.pas
U compiler/powerpc64/cgcpu.pas
U compiler/x86_64/cgcpu.pas
U compiler/cgobj.pas
U compiler/psystem.pas
U compiler/aasmtai.pas
U compiler/m68k/cgcpu.pas
U compiler/ncgutil.pas
U compiler/rautils.pas
U compiler/arm/raarmgas.pas
U compiler/arm/armatts.inc
U compiler/arm/cgcpu.pas
U compiler/arm/armins.dat
U compiler/arm/rgcpu.pas
U compiler/arm/cpubase.pas
U compiler/arm/agarmgas.pas
U compiler/arm/cpuinfo.pas
U compiler/arm/armop.inc
U compiler/arm/narmadd.pas
U compiler/arm/aoptcpu.pas
U compiler/arm/armatt.inc
U compiler/arm/aasmcpu.pas
U compiler/systems/t_embed.pas
U compiler/psub.pas
U compiler/options.pas
git-svn-id: trunk@13801 -
alignment for each memory reference (mantis #12137, and
test/packages/fcl-registry/tregistry1.pp on sparc). This also
enables better code generation for packed records in many cases.
o several changes were made to the compiler to minimise the chances
of accidentally forgetting to set the alignment of memory references
in the future:
- reference_reset*() now has an extra alignment parameter
- location_reset() can now only be used for non LOC_(C)REFERENCE,
use location_reset_ref() for those (split the tloc enum so the
compiler can catch errors using range checking)
git-svn-id: trunk@12719 -
the syntax is exactly the same as for "external", except for
the keyword. It is currently only active for Darwin targets.
It should also work at least for Linux targets, but only with
the GNU assembler (which is why it is not activated there)
+ test for this functionality
git-svn-id: trunk@12009 -
* removed addr_pic again for darwin, as you have to explicitly code
the relative address using a relsym instead of using an assembler
directive like @GOT there
git-svn-id: trunk@9353 -
virtual register
* always add EBX to used_in_proc in case pi_needs_got, because it's
currently always used due to the geteipasebx call
* don't explicitly free the PIC register in the exitcode because
then the assembler optimizer assumes the load restoring it (ebx)
can be safely removed
git-svn-id: trunk@8683 -
to be made pic-safe (mainly accesses to the global default8087cw)
* At the same time also made the non-pic code abi-compliant (access
external data via indirect symbol pointers etc)
Darwin/i386 also puts the got into a virtual register (like
Darwin/ppc), a.o. because the register allocator fails to colour
a routine in aasmcpu.pas if we take away ebx from it.
git-svn-id: trunk@8657 -
suite compiled with -Cg compared to without -Cg)
+ support for using a virtual register as PIC/got base register
* moved got loading code from ncgutil to cgobj/cgcpu (can't test whether
it didn't break anything under linux/i386, because "make cycle OPT=-Cg"
was already broken due to the *prt*.as -> si_*.pp changes)
git-svn-id: trunk@8651 -
* symtables based on TFPHashObjectList and TFPObjectList
* rename torddef.typ to torddef.ordtype
* rename tfloatdef.typ to tfloatdef.floattype
* rename tdef.deftype to tdef.typ
* remove obsolete browser code, browcol is kept so the ide
can still be compiled
git-svn-id: trunk@5192 -
