e.g. being a const parameter or immutable temp. values), managed types like dyn. arrays, new string types and interfaces can be kept in registers.
git-svn-id: trunk@24953 -
the result location is a simple location (a single register/reference)
(mantis #22490)
* print an error when accessing "result" in a nostack pure assembler routine
if the result location is not simple
git-svn-id: trunk@22166 -
function result parameter, because reference counted function results
are not guaranteed to be initialized (we sometimes even pass the,
non-finalized, left-hand side of an assignment as hidden function
result parameter)
git-svn-id: trunk@21955 -
for regular temps. This is required for targets that need special
handling of the temps depending on the type
* converted most gettemp() calls to gethltemp() calls
git-svn-id: branches/jvmbackend@18376 -
represent complex locations (required for full x86-64 ABI support,
which is not yet implemented) -> lots of special result handling
code has been removed and replaced by the parameter handling
routines
+ added support for composite parameters (and hence function
results) to tcg.a_load_ref_cgpara() (so it can be used for
handling, e.g., 64 bit parameters on 32 bit platforms)
* the above fixed writing past the end of allocated memory when
handling records returned in registers on x86-64 whose size is
not a multiple of 8 bytes (mantis #16357)
- removed the x86-64 and PPC specific versions of a_load_ref_cgpara(),
as they are now handled correctly by the generic version
* moved the responsibility of allocating tcgpara cpu registers
(using paramanager.allocparaloc()) from the callers of
cg.a_load*_cgpara() to the cg.a_load*_cgpara() methods
themselves (so the register allocation can be done efficiently
when dealing with function results)
* for the above, renamed paramanager.alloc/freeparaloc() to
paramanager.alloc/freecgpara(), and use paramanager.allocparaloc()
to allocate individual pcgparalocations instead
* fixed the register size of SSE2 function result registers for
x86-64 (when used for floating point), which results in removing
a few superfluous "movs? %xmm0,%xmm0" instructions
* fixed compilation of paramanagers of avr, m68k and mips after r13695
and also updated them for these new changes
git-svn-id: trunk@15350 -
tobjectdef.needs_inittable returns false for classes nowadays (and already
since quite some time)
* nevertheless replaced all usages in the compiler of x.needs_inittable with
is_managed_type(x) (in case some other condition is added again in the
future) and removed all remaining accompanying "and not is_class(x)"
checks
git-svn-id: trunk@15320 -
+ RTL support:
o VFP exceptions are disabled by default on Darwin,
because they cause kernel panics on iPhoneOS 2.2.1 at least
o all denormals are truncated to 0 on Darwin, because disabling
that also causes kernel panics on iPhoneOS 2.2.1 (probably
because otherwise denormals can also cause exceptions)
* set softfloat rounding mode correctly for non-wince/darwin/vfp
targets
+ compiler support: only half the number of single precision
registers is available due to limitations of the register
allocator
+ added a number of comments about why the stackframe on ARM is
set up the way it is by the compiler
+ added regtype and subregtype info to regsets, because they're
also used for VFP registers (+ support in assembler reader)
+ various generic support routines for dealing with floating point
values located in integer registers that have to be transferred to
mm registers (needed for VFP)
* renamed use_sse() to use_vectorfpu() and also use it for
ARM/vfp support
o only superficially tested for Linux (compiler compiled with -Cpvfpv6
-Cfvfpv2 works on a Cortex-A8, no testsuite run performed -- at least
the fpu exception handler still needs to be implemented), Darwin has
been tested more thoroughly
+ added ARMv6 cpu type and made it default for Darwin/ARM
+ ARMv6+ implementations of atomic operations using ldrex/strex
* don't use r9 on Darwin/ARM, as it's reserved under certain
circumstances (don't know yet which ones)
* changed C-test object files for ARM/Darwin to ARMv6 versions
* check in assembler reader that regsets are not empty, because
instructions with a regset operand have undefined behaviour in that
case
* fixed resultdef of tarmtypeconvnode.first_int_to_real in case of
int64->single type conversion
* fixed constant pool locations in case 64 bit constants are generated,
and/or when vfp instructions with limited reach are present
WARNING: when using VFP on an ARMv6 or later cpu, you *must* compile all
code with -Cparmv6 (or higher), or you will get crashes. The reason is
that storing/restoring multiple VFP registers must happen using
different instructions on pre/post-ARMv6.
git-svn-id: trunk@14317 -
alignment for each memory reference (mantis #12137, and
test/packages/fcl-registry/tregistry1.pp on sparc). This also
enables better code generation for packed records in many cases.
o several changes were made to the compiler to minimise the chances
of accidentally forgetting to set the alignment of memory references
in the future:
- reference_reset*() now has an extra alignment parameter
- location_reset() can now only be used for non LOC_(C)REFERENCE,
use location_reset_ref() for those (split the tloc enum so the
compiler can catch errors using range checking)
git-svn-id: trunk@12719 -
shortstring temps don't get maximum alignment)
* changed some gettemptyed() calls into gettemp() calls (gettemptyped
means that this temp can only be used for temps of that type,
which is necessary for refcounted types but not for floats)
git-svn-id: trunk@12036 -
a) cpu64bitaddr, which means that we are generating a compiler which
will generate code for targets with a 64 bit address space/abi
b) cpu64bitalu, which means that we are generating a compiler which
will generate code for a cpu with support for 64 bit integer
operations (possibly running in a 32 bit address space, depending
on the cpu64bitaddr define)
All cpus which had cpu64bit set now have both the above defines set,
and none of the 32 bit cpus have cpu64bitalu set (and none will
compile with it currently)
+ pint and puint types, similar to aint/aword (not pword because that
that conflicts with pword=^word)
* several changes from aint/aword to pint/pword
* some changes of tcgsize2size[OS_INT] to sizeof(pint)
git-svn-id: trunk@10320 -
assembler blocks in procedures marked as inline. I have no idea
why that was done, but it was the case already since a long time
and caused a compiler crash when compiling tests/test/opt/tretopt1
(because it caused the assembler optimizer to process such
assembler blocks, while their operand order is not guaranteed to
be the AT&T one as expected by the optimizers)
git-svn-id: trunk@8604 -
finally blocks
* fixed the handling of function results of inlined functions with
exit statements
+ test for the above two issues and for bug fixed in r8091
* copy may_be_in_reg field inside ttempcreatenode.dogetcopy (allows
some more temps which were needlessly forced into memory to be in
registers)
git-svn-id: trunk@8108 -
* symtables based on TFPHashObjectList and TFPObjectList
* rename torddef.typ to torddef.ordtype
* rename tfloatdef.typ to tfloatdef.floattype
* rename tdef.deftype to tdef.typ
* remove obsolete browser code, browcol is kept so the ide
can still be compiled
git-svn-id: trunk@5192 -
getjumplabel and added type para to getlabel for specific types
* moved lineinfo generation from assemble and aggas to dbgstabs
git-svn-id: trunk@1120 -
(so both can be combined with each other, as well as with other calling
conventions)
* defined COMPPROCINLINEFIXED so SYSTEMINLINE is again activated
git-svn-id: trunk@658 -
