when building the mangled name, because the latter can also be performed
when compiler another unit (and therefore if that other unit's setting
is different from that of the original unit, a wrong mangled name was
generated) + test for this case
git-svn-id: trunk@25388 -
so that code written according to Delphi coding standards can be compiled
into JVM bytecode with routine names conforming to JVM coding standards
git-svn-id: trunk@25385 -
symtype.pas, tdef:
+ add method "fullownerhierarchyname" which allows to retrieve the owner hierarchy name including procedure/function/method names
+ add method "fulltypename" which uses "fullownerhierarchyname" to return a full type name
symdef.pas, tstoreddef:
* implement "fullownerhierarchyname" (including caching of the result)
pgenutil.pas, parse_generic_specialization_types_internal:
* use "tdef.fulltypename" instead of "tdef.typename" to have unique values for each parsed type and thus for the specialization itself
+ tests
git-svn-id: trunk@25175 -
CP_ACP (defaultsystemcodepage), because if all input strings have the
same code page then the result should also have that code page if it's
assigned to a rawbytestring rather than getting defaultsystemcodepage
* do not consider empty strings to determine the code page of the result
in fpc_AnsiStr_Concat_multi(), because that will cause a different
result than when using a sequence of fpc_AnsiStr_Concat() calls (it
ignores empty strings to determine the result code page) and it's also
slower
* do not consider the run time code page of the destination string in
fpc_AnsiStr_Concat(_multi)() because Delphi does not do so either. This
was introduced in r19118, probably to hide another bug
+ test
git-svn-id: branches/cpstrrtl@25143 -
to the ppu file, because it does not exist on the JVM platform and
hence will be 0 (and on other platforms, you'll get a fatal error earlier
in case the filerec type cannot be found) (originally added as part of
r24957)
git-svn-id: branches/cpstrrtl@24990 -
e.g. being a const parameter or immutable temp. values), managed types like dyn. arrays, new string types and interfaces can be kept in registers.
git-svn-id: trunk@24953 -
symsym.pas:
- remove "tgenericconstraintdata" and any using/loading/writing of it in "ttypesym"
- remove "tgenericconstraintflag"
symdef.pas:
+ add "tgenericconstraintdata"
+ load and write "genconstraintdata" in "tstoreddef"
symconst.pas:
+ add "tgenericconstraintflag" so it can be used in "ppudump" as well
defcmp.pas, compare_defs_ext:
* as we allow global operator overloads we can't really determine whether two defs are compatible, because a valid operator for the specialization types might just happen to be in scope of the generic; so for now constraints are only strictly checked when declaring a specialization
pgenutil.pas:
* adjust "parse_generic_parameters" and "check_generic_constraints" to the new location of the constraint data
ppudump.pp:
* corrrectly parse defs which contain generic constraints
git-svn-id: trunk@24628 -
symdef.pas, tstoreddef:
+ comment that the list is allocated on demand (and thus should be checked for Nil)
+ fillgenericparas: create the list when adding at least one generic parameter symbol
- create & ppuload: don't create list instance anymore
+ is_generic & is_specialization: check whether the list is assigned
defcmp.pas, compare_defs_ext:
+ check whether "genericparas" list is assigned
pgenutil.pas:
+ check_generic_constraints: check whether "genericparas" is assigned
+ insert_generic_parameter_types: create list before adding generic parameters
git-svn-id: trunk@24627 -
symconst.pas:
+ extend "thelpertype" by "ht_type" which tells the code in "pdecobj.parse_extended_type" that a type helper declaration has been parsed
node.pas:
+ add a constant which identifies all constant node types
ptype.pas:
+ read_named_type: add a parameter "hadtypetoken" to tell the code whether a "type" token had been parsed before
+ read_named_type: if an identifier "helper" is parsed we need to check whether "hadtypetoken" is true and the modeswitch "m_class" is set, but the "m_delphi" one is not; in that case we have a "type helper" declaration
pgenutil.pas, generate_specialization:
* adjust call to read_named_type
pdecl.pas, types_dec:
* adjust call to read_named_type
pdecobj.pas:
* parse_extended_type: extend for correct handling of primitive types (includes Delphi compatible handling as well) and reject types that are explicitly not allowed
* method_dec: require "static" for class methods in type helpers
* method_doc: allow constructors for type helpers as well
paramgr.pas, tparamanager:
* set_common_funcretloc_info: handle type helper constructors like record constructors
* handle_common_ret_in_param: the "self" value of a type helper constructor is also returned in a parameter
pexpr.pas:
+ add a function to postfixoperators which tries to find and apply a type helper for a given type
* postfixoperators: try to apply type helpers for ordinal constants
* postfixoperators: use the correct string type for string constants
* postfixoperators: try to apply type helpers for enum constants
* postfixoperators: try to apply type helpers for arrays
* postfixoperators: try to apply type helpers for Variant
* postfixoperators: try to apply type helpers for pointer types
* postfixoperators: try to apply type helpers for other types
* factor: check postfixoperators after _REALNUMBER, _CCHAR, _CWCHAR, _TRUE and _FALSE
* factor: also check postfixoperators if a _POINT follows a _NIL
symdef.pas, tdefawaresymtablestack.addhelpers:
* use "generate_objectpascal_helper_key" to generate the key
symtable.pas:
+ add function to generate the key value for the map of extended types using the extended def
* adjust "search_last_objectpascal_helper" and "search_objectpascal_helper" to handle primitive types as well
* use the new "generate_objectpascal_helper_key" function to generate the key
pparautl.pas:
* insert_self_and_vmt_para: don't insert the $vmt symbol for record or type helpers (ToDo: check whether class helpers really need the symbol as well)
* insert_self_and_vmt_para: pass "self" as var parameter for type helpers as well
psub.pas, generate_bodyentry_block:
* also allow type helpers for constructor methods
ncal.pas, tcallnode.gen_self_tree:
* also use a temp variable for type helper constructors
ncgcal.pas, tcgcallnode.secondcallparan:
* allow Pointers to be passed as address param if it is the Self value of a type helper extending a pointer type
* correctly handle the location in case of type helper constructors
+ add tests
git-svn-id: trunk@23580 -
* adjust "is_generic" so that it will really work for true generics only
+ added an analogous method "is_specialization" for specializations
Both methods are not used yet, but this will change in the future...
git-svn-id: trunk@23348 -
fixes a couple of arm-embedded stuff,
adds some controllers, start of fpv4_s16 support, for a complete list of
changes see below:
------------------------------------------------------------------------
r22787 | laksen | 2012-10-20 22:00:36 +0200 (Sa, 20 Okt 2012) | 1 line
Properly do NR_DEFAULTFLAGS detection/allocation/deallocation
------------------------------------------------------------------------
r22782 | laksen | 2012-10-20 07:44:55 +0200 (Sa, 20 Okt 2012) | 1 line
Fixed flags detections code for wide->short optimization code for Thumb-2
------------------------------------------------------------------------
r22778 | laksen | 2012-10-19 20:23:14 +0200 (Fr, 19 Okt 2012) | 1 line
Added coprocessor registers, and support for 6 operands(MCR/MRC instructions, etc)
------------------------------------------------------------------------
r22647 | laksen | 2012-10-14 21:28:08 +0200 (So, 14 Okt 2012) | 1 line
Added register specifications to lpc1768.pp. From Joan Duran
------------------------------------------------------------------------
r22646 | laksen | 2012-10-14 21:10:20 +0200 (So, 14 Okt 2012) | 4 lines
Fixed some minor formating issues
Implemented a small heap mananger
Implemented console IO
Changed default LineEnding to CrLf(to ease console IO parsing)
------------------------------------------------------------------------
r22599 | laksen | 2012-10-09 08:58:58 +0200 (Di, 09 Okt 2012) | 1 line
Added all STM32F1 configurations
------------------------------------------------------------------------
r22597 | laksen | 2012-10-08 22:10:45 +0200 (Mo, 08 Okt 2012) | 1 line
Added initial support for the Cortex-M4F FPv4_S16 FPU
------------------------------------------------------------------------
r22596 | laksen | 2012-10-08 22:04:14 +0200 (Mo, 08 Okt 2012) | 1 line
Added FPv4_d16 FPU instructions, and a few extra registers
------------------------------------------------------------------------
r22592 | laksen | 2012-10-08 16:07:40 +0200 (Mo, 08 Okt 2012) | 2 lines
Added support for IT block merging
Added a peephole pattern check for UXTB->UXTH chains
------------------------------------------------------------------------
r22590 | laksen | 2012-10-08 14:30:00 +0200 (Mo, 08 Okt 2012) | 3 lines
Add CBNZ/CBZ instructions
Create preliminary Thumb-2 PeepHoleOptPass2 code, hacked together from the ARM mode code
Added a number of simple size optimizations for common Thumb-2 instructions
------------------------------------------------------------------------
r22582 | laksen | 2012-10-08 06:49:39 +0200 (Mo, 08 Okt 2012) | 3 lines
Fix optimizations of Thumb-2 code
Fix problem with loading of condition operand for IT instructions
Properly split IT blocks when register allocator tries to spill inside a block.
------------------------------------------------------------------------
r22581 | laksen | 2012-10-08 05:15:40 +0200 (Mo, 08 Okt 2012) | 4 lines
Fixed assembler calling command line for cpus>ARMv5TE. EDSP instructions will generate errors while assembling, due to RTL assembler routines
Updated boot code for all Cortex-M3 controllers, and sc32442b to use weak linking for exception tables.
Cortex-M3 devices now also share initialization routine to simplify maintenance
STM32F10x classes now have specific units which fit the interrupt source names and counts
------------------------------------------------------------------------
r22580 | laksen | 2012-10-08 05:10:44 +0200 (Mo, 08 Okt 2012) | 2 lines
Added support for .section, .set, .weak, and .thumb_set directive for GAS assembler reader
IFDEF'ed JVM specific assembler directives, to prevent ait_* set to exceed 32 elements
------------------------------------------------------------------------
r22579 | laksen | 2012-10-08 02:10:52 +0200 (Mo, 08 Okt 2012) | 3 lines
Remove all traces of the interrupt vector table generation mechanism
Clean up cpuinfo tables
Fixed ARMv7M bug(BLX <label> doesn't exist on that version)
git-svn-id: trunk@22792 -
type that contains managed types, but this child doesn't contain any
managed type itself (since r16632, the parent should be considered as a
field of the child in terms of needing initialization/finalization)
git-svn-id: trunk@22461 -
+ symconst.pas: add a new flag to symtables to mark them as containing at least one generic (will be used to decide whether an expression like "Foo<Bar" should even remotely be considered a specialization)
* utils/ppudump.pp: respect the new flag
* pdecl.pas, types_dec: add the flag for every generic we have parsed
* pgenutil.pas, generate_specialization: add the flag to the specialize symtable if a nested generic set it for the temporary symtable (does not happen currently, but will in the future when nested generics are supported)
+ keep references to all generic para symbols in the def; this way the symtable containing the type parameters does not need to be walked every time we need to do something with the parameters
git-svn-id: trunk@22379 -
order to minimise memory losses due to alignment padding. Not yet enabled
by default at any optimization level, but can be (de)activated separately
via -Oo(no)orderfields
o added separate tdef.structalignment method that returns the alignment
of a type when it appears in a record/object/class (factors out
AIX-specific double alignment in structs)
o changed the handling of the offset of a delegate interface
implemented via a field, by taking the field offset on demand
rather than at declaration time (because the ordering optimization
causes the offsets of fields to be unknown until the entire
declaration has been parsed)
git-svn-id: trunk@21947 -
pointer/arraydefs, because these operations can have side-effects in case
of helpers (will add/remove helpers, so popping after the insertion
removed all helpers in the static symtable of the current unit)
git-svn-id: trunk@21282 -
o support for the new codepage-aware ansistrings in the jvm branch
o empty ansistrings are now always represented by a nil pointer rather than
by an empty string, because an empty string also has a code page which
can confuse code (although this will make ansistrings harder to use
in Java code)
o more string helpers code shared between the general and jvm rtl
o support for indexbyte/word in the jvm rtl (warning: first parameter
is an open array rather than an untyped parameter there, so
indexchar(pcharvar^,10,0) will be equivalent to
indexchar[pcharvar^],10,0) there, which is different from what is
intended; changing it to an untyped parameter wouldn't help though)
o default() support is not yet complete
o calling fpcres is currently broken due to limitations in
sysutils.executeprocess() regarding handling unix quoting and
the compiler using the same command lines for scripts and directly
calling external programs
o compiling the Java compiler currently requires adding ALLOW_WARNINGS=1
to the make command line
git-svn-id: branches/jvmbackend@20887 -
involved and the classes are not exactly equal (but one is a child of the
other): we have to look up the real class definition first in those cases
git-svn-id: trunk@20622 -
class before its VMT has been built, because that's the process that looks
for inherited abstract methods that are overridden -> instead use a new
synthetic method kind (tsk_callthrough_nonabstract) that will call
through to another method (in this case a constructor) if the owning
class does not contain any abstract methods, and generates an
empty routine otherwise
git-svn-id: branches/jvmbackend@20589 -
(= Android 4.0) java headers: java.*, javax.*, org.*, junit.*, android.*).
The RTL can also be used to target earlier versions of the Android
platform, but you manually have to take care of not using APIs that
weren't available yet. Adding separate units for separate platform
versions would only partly solve the problem, because some of the
classes used inside the system unit have also changed across
versions.
Use -Tandroid while compiling to select the Android OS as target
platform.
git-svn-id: branches/jvmbackend@19830 -
- don't pass CP_NONE encoding to internal functions. They handled it as 0 encoding. This will optimize the generated code a bit.
- convert all king of string/char/pchar constants to local ansistring def if they needs to be passed to rawbytestring type. They should not get a CP_NONE codepage (delphi compatible)
- don't convert left and right arguments of string concatenation to ansistring type if they are already ansistrings but with different codepage - RTL already handles different codepages in concat routine
- fix resultdef for ansistring concatenations inside assignments - return def of left assignment operand if it is already ansistring - this reduces amount of unneeded condepage conversions since concat functions can return result in any desired codepage
rtl: remove CP_NONE comparisions from most of RTL functions, replace 0 constant with CP_ACP
tests: add test to check various conversions to RawByteString type
git-svn-id: trunk@19519 -
- add helper function getansistringcodepage which returns explicitly set codepage or 0 in other case
- add helper function getansistringdef which return a def with explicitly set codepage or cansistringtype in other case
- change tstoreddef.createnai constructor to allow set codepage in constructor
- don't convert string constants to rawbytestring. if string constant already has a codepage - preserve it or convert to ansistring codepage (delphi compatible)
- don't perform string conversion from ansistring to strings with explicitly set codepage (by directive or by compiler switch) and vice versa (delphi compatible)
+ test which covers most of the cases
git-svn-id: trunk@19510 -
* eliminate warnings in compiler (i386 & i368->x86_64) and minor refactorings
- comment out unused vars and types
- comment out unneeded comparisons (Longword <=> 0)
- suppress some "comparison always true|false" warnings
- tweak visiblity sections
git-svn-id: trunk@19385 -
U compiler\pdecsub.pas
U compiler\symdef.pas
U compiler\pdecobj.pas
U compiler\htypechk.pas
U compiler\ncal.pas
U compiler\symtable.pas
--- Recording mergeinfo for merge of r19281 into '.':
U .
--- Merging r19282 into '.':
A tests\webtbf\tw19975.pp
--- Recording mergeinfo for merge of r19282 into '.':
G .
git-svn-id: trunk@19343 -
are used to implement procvar types, and add a constructor to the procvar
types that accept an instance implementing this interface -> much easier
and more natural to use procvar types from Java code
git-svn-id: branches/jvmbackend@19216 -
var-parameters on the JVM target for changes to the value passed
as var-parameter during the function call (because they are handled
via copy-in/copy-out, this may indicate unexpected bahviour later on).
out-parameters are checked in the same way, except if the out-parameter
is a local variable because then reading it before the call may result
in a bytecode verification error (since the variable may not yet be
initialized)
git-svn-id: branches/jvmbackend@19153 -
*In normal procedure "var" and "out" RawByteString parameters does not accept other string types. Procedures with
"compilerproc" directive or the newly added "rtlproc" directive accept that. Please note that it is up to the
procedure coder to ensure the correctness of the code page in that case. The new directive is needed to handle
the RTL procedures/functions that are not marked as "compilerproc" such as "UniqueString", "Insert" and "Delete".
*Correct "fpc_ansistr_concat" to handle code page correctly.
*Default "ansitring" type is now created with code page set to "0" instead of "65535". Before that change it was
impossible to distinguish a "RawByteString" with the default "ansistring". At runtime "ansistring" variable'code
page is set to DefaultSystemCodePage
*UniqueString flavor of "SetLength" has been updated to release memory when shrinked to at least 50%, like ansitring
does.
git-svn-id: trunk@19118 -
+ support parsing of strings with code page specification
+ added encoding and elementsize field to ansi- and unicodestring records
+ some basic rtl support routines for encoding aware strings
+ DefaultSystemCodePage
+ DefaultUnicodeCodePage
+ ppu writing/loading of code page aware strings
git-svn-id: trunk@19080 -
o don't try to create .class files for generic types
o still generate all JVM-specific wrappers for generic types even though they
won't be written out, because when specializing all the defid's have to
match exactly
o add synthetic routine implementations after generating the specializations,
so that the synthetic routines for those specializations are also generated
(we don't specialize generic versions of the synthetic generic routines
because it's not easy or even always possible to create valid generic
versions of synthetic routines)
o Note: these are Pascal-style generics, not Java-style generics. The generic
types nor their specializations are usable from Java code (specializations
may become usable in the future)
git-svn-id: branches/jvmbackend@19047 -
