%%% Reordering of errorheu.msg respective to errore.msg %%% Contains all comments from errorheu.msg # # This file is part of the Free Pascal Compiler # Copyright (c) 1999-2018 by the Free Pascal Development team # # Hebrew (UTF8) language file for Free Pascal Compiler # Contributed by Ido Kanner and Dotan Kamber # Based on errore.msg of SVN revision 8988 # # See the file COPYING.v2, included in this distribution, # for details about the copyright. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # # CodePage 65001 # # The constants are build in the following order: # __ # # is the part of the compiler the message is used # asmr_ assembler parsing # asmw_ assembler writing/binary writers # unit_ unit handling # scan_ scanner # parser_ parser # type_ type checking # general_ general info # exec_ calls to assembler, linker, binder # # the type of the message it should normally used for # f_ fatal error # e_ error # w_ warning # n_ note # h_ hint # i_ info # l_ add linenumber # u_ used # t_ tried # c_ conditional # d_ debug message # x_ executable informations # # # General # # 01023 is the last used one # # BeginOfTeX % \section{General compiler messages} % This section gives the compiler messages which are not fatal, but which % display useful information. The number of such messages can be % controlled with the various verbosity level \var{-v} switches. % \begin{description} general_t_compilername=01000_T_מהדר: $1 % When the \var{-vt} switch is used, this line tells you what compiler % is used. general_d_sourceos=01001_D_מערכת הפעלה: $1 % When the \var{-vd} switch is used, this line tells you what the source % operating system is. general_i_targetos=01002_I_מערכת הפעלה מיועדת: $1 % When the \var{-vd} switch is used, this line tells you what the target % operating system is. general_t_exepath=01003_T_משתמש בנתיב הרצה: $1 % When the \var{-vt} switch is used, this line tells you where the compiler % looks for its binaries. general_t_unitpath=01004_T_משתמש בנתיב היחידות: $1 % When the \var{-vt} switch is used, this line tells you where the compiler % looks for compiled units. You can set this path with the \var{-Fu} general_t_includepath=01005_T_משתמש בנתיב המוסף: $1 % When the \var{-vt} switch is used, this line tells you where the compiler % looks for its include files (files used in \var{\{\$I xxx\}} statements). % You can set this path with the \var{-I} option. general_t_librarypath=01006_T_משתמש בנתיב הספריה: $1 % When the \var{-vt} switch is used, this line tells you where the compiler % looks for the libraries. You can set this path with the \var{-Fl} option. general_t_objectpath=01007_T_Using object path: $1 % When the \var{-vt} switch is used, this line tells you where the compiler % looks for object files you link in (files used in \var{\{\$L xxx\}} statements). % You can set this path with the \var{-Fo} option. general_i_abslines_compiled=01008_I_$1 שורות הודרו, ב$2 שניות % When the \var{-vi} switch is used, the compiler reports the number % of lines compiled, and the time it took to compile them (real time, % not program time). general_f_no_memory_left=01009_F_לא נשאר זכרון % The compiler doesn't have enough memory to compile your program. There are % several remedies for this: % \begin{itemize} % \item If you're using the build option of the compiler, try compiling the % different units manually. % \item If you're compiling a huge program, split it up in units, and compile % these separately. % \item If the previous two don't work, recompile the compiler with a bigger % heap (you can use the \var{-Ch} option for this, \seeo{Ch}) % \end{itemize} general_i_writingresourcefile=01010_I_כותב את קובץ משאבי טבלת המחרוזות: $1 % This message is shown when the compiler writes the Resource String Table % file containing all the resource strings for a program. general_e_errorwritingresourcefile=01011_E_כותב את קובץ משאבי טבלת המחרוזות: $1 % This message is shown when the compiler encountered an error when writing % the Resource String Table file general_i_fatal=01012_I_שגיאה קריטית: % Prefix for Fatal Errors general_i_error=01013_I_שגיאה: % Prefix for Errors general_i_warning=01014_I_התראה: % Prefix for Warnings general_i_note=01015_I_הערה: % Prefix for Notes general_i_hint=01016_I_רמז: % Prefix for Hints general_e_path_does_not_exist=01017_E_הנתיב "$1" אינו קיים % The specified path does not exist. general_f_compilation_aborted=01018_F_ההידור בוטל % Compilation was aborted. general_text_bytes_code=01019_bytes code % The size of the generated executable code, in bytes. general_text_bytes_data=01020_bytes data % The size of the generated program data, in bytes. general_i_number_of_warnings=01021_I_אזהרות $1 הונפקו % Total number of warnings issued during compilation. general_i_number_of_hints=01022_I_הונפקו $1 רמזים % Total number of hints issued during compilation. general_i_number_of_notes=01023_I_הונפקו $1 הערות % Total number of notes issued during compilation. % \end{description} # # Scanner # # 02084 is the last used one # % \section{Scanner messages.} % This section lists the messages that the scanner emits. The scanner takes % care of the lexical structure of the pascal file, i.e. it tries to find % reserved words, strings, etc. It also takes care of directives and % conditional compiling handling. % \begin{description} general_f_ioerror=01024_F_I/O error: $1 % During compilation an I/O error happened which allows no further compilation. general_f_oserror=01025_F_Operating system error: $1 % During compilation an operating system error happened which allows no further compilation. % \end{description} # # Scanner # # 02098 is the last used one # % \section{Scanner messages.} % This section lists the messages that the scanner emits. The scanner takes % care of the lexical structure of the pascal file, i.e. it tries to find % reserved words, strings, etc. It also takes care of directives and % conditional compilation handling. % \begin{description} scan_f_end_of_file=02000_F_סוף קובץ לא צפוי % this typically happens in one of the following cases : % \begin{itemize} % \item The source file ends before the final \var{end.} statement. This % happens mostly when the \var{begin} and \var{end} statements aren't % balanced; % \item An include file ends in the middle of a statement. % \item A comment was not closed % \end{itemize} scan_f_string_exceeds_line=02001_F_מחרוזת גולשת משורה % There is a missing closing ' in a string, so it occupies % multiple lines. scan_f_illegal_char=02002_F_תו לא חוקי "$1" ($2) % An illegal character was encountered in the input file. scan_f_syn_expected=02003_F_שגיאת תחביר: מצפה ל "$1" אבל "$2" נמצא % This indicates that the compiler expected a different token than % the one you typed. It can occur almost everywhere where you make a % mistake against the pascal language. scan_t_start_include_file=02004_TL_מתחיל קריאה של קובץ תוספות $1 % When you provide the \var{-vt} switch, the compiler tells you % when it starts reading an included file. scan_w_comment_level=02005_W_רמת הערות $1 נמצאה % When the \var{-vw} switch is used, then the compiler warns you if % it finds nested comments. Nested comments are not allowed in Turbo Pascal % and can be a possible source of errors. scan_n_ignored_switch=02008_N_מתעלם ממתג מהדר "$1" % With \var{-vn} on, the compiler warns if it ignores a switch scan_w_illegal_switch=02009_W_מתג מהדר "$1" אינו חוקי % You included a compiler switch (i.e. \var{\{\$... \}}) which the compiler % does not recognise scan_w_switch_is_global=02010_W_מיקום שגוי למתג מהדר גלובלי % The compiler switch is misplaced, and should be located at % the start of the unit or program. scan_e_illegal_char_const=02011_E_תו קבוע לא חוקי % This happens when you specify a character with its ASCII code, as in % \var{\#96}, but the number is either illegal, or out of range. scan_f_cannot_open_input=02012_F_לא ניתן לפתוח את קובץ "$1" % \fpc cannot find the program or unit source file you specified on the % command line. scan_f_cannot_open_includefile=02013_F_לא ניתן לפתוח את קובץ התוספות "$1" % \fpc cannot find the source file you specified in a \var{\{\$include ..\}} % statement. scan_e_illegal_pack_records=02015_E_יישור רשומה לא חוקי מייצג "$1" % You are specifying the \var{\{\$PACKRECORDS n\} } or \var{\{\$ALIGN n\} } % with an illegal value for \var{n}. For \$PACKRECORDS valid alignments are 1, 2, 4, 8, 16, 32, C, % NORMAL, DEFAULT, and for \$ALIGN valid alignment are 1, 2, 4, 8, 16, 32, ON, % OFF. Under mode MacPas \$ALIGN also supports MAC68K, POWER and RESET. scan_e_illegal_pack_enum=02016_E_מספר מינימלי של מנייה המייצג "$1" אינו חוקי % You are specifying the \var{\{\$PACKENUM n\}} with an illegal value for % \var{n}. Only 1,2,4, NORMAL or DEFAULT are valid here. scan_e_endif_expected=02017_E_מצפה ל$ENDIF בהגדרה $1 $2 הנמצאת ב$3 שורה $4 % Your conditional compilation statements are unbalanced. scan_e_preproc_syntax_error=02018_E_שגיאת תחביר בעת ניתוח משפט תנאי % There is an error in the expression following the \var{\{\$if ..\}}, $ifc or $setc compiler % directives. scan_e_error_in_preproc_expr=02019_E_הערכת משפט תנאי % There is an error in the expression following the \var{\{\$if ..\}}, $ifc or $setc compiler % directives. scan_w_macro_cut_after_255_chars=02020_W_תוכן המקרו מוגבל לאורך של 255 תווים % The contents of macros cannot be longer than 255 characters. scan_e_endif_without_if=02021_E_ENDIF ללא IF(N)DEF % Your \var{\{\$IFDEF ..\}} and {\{\$ENDIF\}} statements aren't balanced. scan_f_user_defined=02022_F_הגדרת משתמש: $1 % A user defined fatal error occurred. see also the \progref scan_e_user_defined=02023_E_הגדרת משתמש: $1 % A user defined error occurred. see also the \progref scan_w_user_defined=02024_W_הגדרת משתמש: $1 % A user defined warning occurred. see also the \progref scan_n_user_defined=02025_N_הגדרת משתמש: $1 % A user defined note was encountered. see also the \progref scan_h_user_defined=02026_H_הגדרת משתמש: $1 % A user defined hint was encountered. see also the \progref scan_i_user_defined=02027_I_הגדרת משתמש: $1 % User defined information was encountered. see also the \progref scan_e_keyword_cant_be_a_macro=02028_E_מילת מפתח המוגדרת מחדש כמקרו אינה מכילה השפעה % You cannot redefine keywords with macros. scan_f_macro_buffer_overflow=02029_F_גלישת מאגר מקרו בעת קריאה או הרחבה של מקרו % Your macro or its result was too long for the compiler. scan_w_macro_too_deep=02030_W_הרחבת מקרו גולשת מעומק של 16. % When expanding a macro, macros have been nested to a level of 16. % The compiler will expand no further, since this may be a sign that % recursion is used. scan_w_wrong_styled_switch=02031_W_ מתגי פעולת מהדר אינם נתמכים בהערות מסוג // % Compiler switches should be in normal pascal style comments. scan_d_handling_switch=02032_DL_מטפל במתג "$1" % When you set debugging info on (\var{-vd}) the compiler tells you when it % is evaluating conditional compile statements. scan_c_endif_found=02033_CL_נמצא ENDIF $1 % When you turn on conditional messages(\var{-vc}), the compiler tells you % where it encounters conditional statements. scan_c_ifdef_found=02034_CL_נמצא IFDEF $1, $2 % When you turn on conditional messages(\var{-vc}), the compiler tells you % where it encounters conditional statements. scan_c_ifopt_found=02035_CL_נמצא IFOPT $1, $2 % When you turn on conditional messages(\var{-vc}), the compiler tells you % where it encounters conditional statements. scan_c_if_found=02036_CL_נמצא IF $1, $2 % When you turn on conditional messages(\var{-vc}), the compiler tells you % where it encounters conditional statements. scan_c_ifndef_found=02037_CL_נמצא IFNDEF $1, $2 % When you turn on conditional messages(\var{-vc}), the compiler tells you % where it encounters conditional statements. scan_c_else_found=02038_CL_נמצא ELSE $1, $2 % When you turn on conditional messages(\var{-vc}), the compiler tells you % where it encounters conditional statements. scan_c_skipping_until=02039_CL_מדלג... % When you turn on conditional messages(\var{-vc}), the compiler tells you % where it encounters conditional statements, and whether it is skipping or % compiling parts. scan_i_press_enter=02040_I_לחץ על להמשיך % When the \var{-vi} switch is used, the compiler stops compilation % and waits for the \var{Enter} key to be pressed when it encounters % a \var{\{\$STOP\}} directive. scan_w_unsupported_switch=02041_W_מתג "$1" אינו נתמך % When warnings are turned on (\var{-vw}) the compiler warns you about % unsupported switches. This means that the switch is used in Delphi or % Turbo Pascal, but not in \fpc scan_w_illegal_directive=02042_W_הוראת המהדר "$1" אינה חוקית % When warings are turned on (\var{-vw}) the compiler warns you about % unrecognised switches. For a list of recognised switches, \progref scan_t_back_in=02043_TL_חזרה ב$1 % When you use (\var{-vt}) the compiler tells you when it has finished % reading an include file. scan_w_unsupported_app_type=02044_W_אין תמיכה לסוג האפליקציה: "$1" % You get this warning, if you specify an unknown application type % with the directive \var{\{\$APPTYPE\}} scan_w_app_type_not_support=02045_W_APPTYPE אינו נתמך ע"י ההמערכת הפעלה המבוקשת % The \var{\{\$APPTYPE\}} directive is supported by certain operating systems only. scan_w_description_not_support=02046_W_DESCRIPTION אינו נתמך ע"י מערכת ההפעלה המבוקשת % The \var{\{\$DESCRIPTION\}} directive is not supported on this target OS scan_n_version_not_support=02047_N_VERSION אינו נתמך ע"י מערכת הפעלה המבוקשת % The \var{\{\$VERSION\}} directive is not supported on this target OS scan_n_only_exe_version=02048_N_VERSION רק לקבצי exe או DLL % The \var{\{\$VERSION\}} directive is only used for executable or DLL sources. scan_w_wrong_version_ignored=02049_W_פורמט שגוי להוראת VERSION: "$1" % The \var{\{\$VERSION\}} directive format is majorversion.minorversion % where majorversion and minorversion are words. scan_e_illegal_asmmode_specifier=02050_E_סגנון האסמבלר שצויין "$1" אינו חוקי % When you specify an assembler mode with the \var{\{\$ASMMODE xxx\}} % the compiler didn't recognize the mode you specified. scan_w_no_asm_reader_switch_inside_asm=02051_W_מתג קורא הASM אינו אפשרי בתוך משפט אסמבלי. "$1" יהיה ישפיע רק בהכרזה הבאה/ % It is not possible to switch from one assembler reader to another % inside an assembler block. The new reader will be used for next % assembler statements only. scan_e_wrong_switch_toggle=02052_E_שימוש שגוי במתג. השתמש בON/OFF או ב +/- % You need to use ON or OFF or a + or - to toggle the switch scan_e_resourcefiles_not_supported=02053_E_קובץ המשאבים אינו נתמך ביעד הנבחר % The target you are compiling for doesn't support resource files. scan_w_include_env_not_found=02054_W_משתנה הסביבה "$1" לא נמצא בסביבה % The included environment variable can't be found in the environment, it will % be replaced by an empty string instead. scan_e_invalid_maxfpureg_value=02055_E_ערך לא חוקי להגבלות אוגר הFPC % Valid values for this directive are 0..8 and NORMAL/DEFAULT scan_w_only_one_resourcefile_supported=02056_W_רק קובץ משאבים אחד נתמך ביעד זה % The target you are compiling for supports only one resource file. % The first resource file found is used, the others are discarded. scan_w_macro_support_turned_off=02057_W_התמיכה במקרו כובה % A macro declaration has been found, but macro support is currently off, % so the declaration will be ignored. To turn macro support on compile with % -Sm on the commandline or add \{\$MACRO ON\} in the source scan_e_invalid_interface_type=02058_E_הוכרז סוג ממשק לא חוקי. הגדרות חוקיות הם COM, CORBA או DEFAULT % The interface type that was specified is not supported scan_w_appid_not_support=02059_W_APPID נתמך רק בPALMOS % The \var{\{\$APPID\}} directive is only supported for the PalmOS target. scan_w_appname_not_support=02060_W_APPNAME נתמך רק בPALMOS % The \var{\{\$APPNAME\}} directive is only supported for the PalmOS target. scan_e_string_exceeds_255_chars=02061_E_מחרוזת קבועה לא יכולה להיות מעל 255 תווים % A single string constant can contain at most 255 chars. Try splitting up the % string in multiple smaller parts and concatenate them with a + operator. scan_f_include_deep_ten=02062_F_הוספת קבצי הinclude גלש מעומק ה16 % When including include files the files have been nested to a level of 16. % The compiler will expand no further, since this may be a sign that % recursion is used. scan_e_too_many_push=02063_F_יותר מידי שכבות PUSH % A maximum of 20 levels is allowed. This error occurs only in mode MacPas. scan_e_too_many_pop=02064_E_POP ללא שחרור של PUSH % This error occurs only in mode MacPas. scan_e_error_macro_lacks_value=02065_E_מקרו "$1" לא מכיל ערכים % Thus the conditional compile time expression cannot be evaluated. scan_e_wrong_switch_toggle_default=02066_E_שימוש במתג שגוי, השתמש ב ON/OFF/DEFAULT או ב+/-/* % You need to use ON or OFF or DEFAULT or a + or - or * to toggle the switch scan_e_mode_switch_not_allowed=02067_E_מצב מתג "$1" לא מורשה % A mode switch has already been encountered, or, in case of option -Mmacpas, % a mode switch occur after UNIT. scan_e_error_macro_undefined=02068_E_משתנה זמן הידור "$1" לא הוגדר. % Thus the conditional compile time expression cannot be evaluated. Only in mode MacPas. scan_e_utf8_bigger_than_65535=02069_E_נמצא קוד UTF-8 גבוהה יותר מ65535 % \fpc handles utf-8 strings internally as widestrings e.g. the char codes are limited to 65535 scan_e_utf8_malformed=02070_E_מחרוזת UTF-8 תקולה % The given string isn't a valid UTF-8 string scan_c_switching_to_utf8=02071_C_UTF-8 signature found, using UTF-8 encoding % The compiler found an UTF-8 encoding signature (\$ef, \$bb, \$bf) at the beginning of a file, % so it interprets it as an UTF-8 file scan_e_compile_time_typeerror=02072_E_ביטוי בזמן הידור: נדרש $1 אבל התקבל $2 ב$3 % Type check of a compile time expression failed. scan_n_app_type_not_support=02073_N_APPTYPE לא נתמך במערכת ההפעלה המבוקשת % The \var{\{\$APPTYPE\}} directive is supported by certain operating systems only. scan_e_illegal_optimization_specifier=02074_E_סופק מיטוב לא חוקי "$1" % When you specify an optimization with the \var{\{\$OPTIMIZATION xxx\}} % the compiler didn't recognize the optimization you specified. scan_w_setpeflags_not_support=02075_W_SETPEFLAGS אינו נתמך במערכת ההפעלה המבוקשת % The \var{\{\$SETPEFLAGS\}} directive is not supported by the target OS scan_w_imagebase_not_support=02076_W_IMAGEBASE אינו נתמך על ידי מערכת ההפעלה המבוקשת % The \var{\{\$IMAGEBASE\}} directive is not supported by the target OS scan_w_minstacksize_not_support=02077_W_MINSTACKSIZE אינו נתמך על ידי מערכת ההפעלה המבוקשת % The \var{\{\$MINSTACKSIZE\}} directive is not supported by the target OS scan_w_maxstacksize_not_support=02078_W_MAXSTACKSIZE אינו נתמך על ידי מערכת ההפעלה המבוקשת % The \var{\{\$MAXSTACKSIZE\}} directive is not supported by the target OS scanner_e_illegal_warn_state=02079_E_שימוש לא חוקי בהנחית $WARN % Only ON and OFF can be used as state with a \$warn compiler directive scan_e_only_packset=02080_E_ערך של אריזה לא חוקי % Only 0, 1, 2, 4, 8, DEFAULT and NORMAL are allowed as packset parameter scan_w_pic_ignored=02081_W_מתעלם מהוראת PIC % Several targets like windows do not support neither need PIC so the PIC directive and switch are % ignored. scan_w_unsupported_switch_by_target=02082_W_המתג "$1" אינו נתמך בסוג תוצאה שנבחר % Some compiler switches like \$E are not supported by all targets. scan_w_frameworks_darwin_only=02084_W_אפשרויות מבוססות מסגרת נתמכות רק עבור Darwin/Mac OS X % Frameworks are not a known concept, or at least not supported by FPC, on operating systems other than Darwin/Mac OS X. scan_e_illegal_minfpconstprec=02085_E_דיוק הערך הקבוע של הנקודה העשרונית המינימלית "$1" אינו חוקי % Valid minimal precisions for floating point constants are default, 32 and 64, which mean respectively minimal (usually 32 bit), 32 bit and 64 bit precision. % \end{description} # # Parser # # 03192 is the last used one # % \section{Parser messages} % This section lists all parser messages. The parser takes care of the % semantics of you language, i.e. it determines if your pascal constructs % are correct. % \begin{description} scan_w_multiple_main_name_overrides=02086_W_Overriding name of "main" procedure multiple times, was previously set to "$1" % The name for the main entry procedure is specified more than once. Only the last % name will be used. scanner_w_illegal_warn_identifier=02087_W_Illegal identifier "$1" for $WARN directive % Identifier is not known by a \var{\{\$WARN\}} compiler directive. scanner_e_illegal_alignment_directive=02088_E_Illegal alignment directive % The alignment directive is not valid. Either the alignment type is not known or the alignment % value is not a power of two. scanner_f_illegal_utf8_bom=02089_F_It is not possible to include a file that starts with an UTF-8 BOM in a module that uses a different code page % All source code that is part of a single compilation entity (program, library, unit) must be encoded % in the same code page scanner_w_directive_ignored_on_target=02090_W_Directive "$1" is ignored for the current target platform % Some directives are ignored for certain targets, such as changing the % packrecords and packenum settings on managed platforms. scan_w_unavailable_system_codepage=02091_W_Current system codepage "$1" is not available for the compiler. Switching default codepage back to "$2". % The current system codepage is not known by the compiler. % The compiler is compiled with support for several codepages built-in. % The codepage of the operation system is not in that list. You will need to recompile % the compiler with support for this codepage. scan_w_setpeoptflags_not_support=02092_W_SETPEOPTFLAGS is not supported by the target OS % The \var{\{\$SETPEOPTFLAGS\}} directive is not supported by the target OS. scan_e_illegal_peflag=02093_E_Illegal argument for SETPEFLAGS % The given argument for SETPEFLAGS is neither a correct named value nor an % ordinal value scan_e_illegal_peoptflag=02094_E_Illegal argument for SETPEOPTFLAGS % The given argument for SETPEOPTFLAGS is neither a correct named value nor an % ordinal value scan_e_unsupported_switch=02095_E_Directive $1 is not supported on this target % Not all compiler directives are supported on all targets. scan_w_invalid_stacksize=02096_W_The specified stack size is not within the valid range for the platform. Setting the stack size ignored. % The valid range for the stack size is 1024 - 67107839 on 32-bit and 64-bit % platforms and 1024 - 65520 on 16-bit platforms. Additionally, for Turbo Pascal 7 % compatibility reasons, specifying a stack size of 65521 on 16-bit platforms % actually sets the stack size to 65520. scan_w_heapmax_lessthan_heapmin=02097_W_The specified HeapMax value is smaller than the HeapMin value. Setting HeapMax ignored. % The HeapMax value (if specified) must be greater than or equal to the HeapMin % value. Otherwise, the HeapMax value is ignored. scan_e_illegal_hugepointernormalization=02098_E_Illegal argument for HUGEPOINTERNORMALIZATION % The only allowed values for HUGEPOINTERNORMALIZATION are BORLANDC, MICROSOFTC % and WATCOMC. % \end{description} # # Parser # # 03339 is the last used one # % \section{Parser messages} % This section lists all parser messages. The parser takes care of the % semantics of you language, i.e. it determines if your Pascal constructs % are correct. % \begin{description} parser_e_syntax_error=03000_E_מפרש - שגיאה תחבירית % An error against the Turbo Pascal language was encountered. This happens % typically when an illegal character is found in the sources file. parser_e_dont_nest_interrupt=03004_E_פרוצדורת פסיקה אינה יכולה להיות מקוננת % An \var{INTERRUPT} procedure must be global. parser_w_proc_directive_ignored=03005_W_מתעלם מסוג פרוצדורה "$1" % The specified procedure directive is ignored by FPC programs. parser_e_no_overload_for_all_procs=03006_E_לא כל ההכזרות של "$1" בעלות הכרזת OVERLOAD % When you want to use overloading using the \var{OVERLOAD} directive, then % all declarations need to have \var{OVERLOAD} specified. parser_e_export_name_double=03008_E_כפילויות בייצוא שם הפונקציה "$1" % Exported function names inside a specific DLL must all be different parser_e_export_ordinal_double=03009_E_כפילויות בייצוא אינדקס הפונקציה "$1" % Exported function names inside a specific DLL must all be different parser_e_export_invalid_index=03010_E_אינדקס לא תקין לייצוא הפונקציה % DLL function index must be in the range \var{1..\$FFFF} parser_w_parser_reloc_no_debug=03011_W_שינוי מיקום נתוני הניפוי לא עובדים לקבצי DLL או קבצי הרצה. התבטל. % It is currently not possible to include debug information in a relocatable DLL. parser_w_parser_win32_debug_needs_WN=03012_W_לאפשר ניפוי שגיאות לwin32 יש לבטל את שינוי המיקום ע"י האפשרות -WN % Stabs info is wrong for relocatable DLL or EXES use -WN % if you want to debug win32 executables. parser_e_constructorname_must_be_init=03013_E_שם יוצר חייב להיות INIT % You are declaring an object constructor with a name which is not \var{init}, and the % \var{-Ss} switch is in effect. See the \var{-Ss} switch (\seeo{Ss}). parser_e_destructorname_must_be_done=03014_E_שם הורס חייב להיות DONE % You are declaring an object destructor with a name which is not \var{done}, and the % \var{-Ss} switch is in effect. See the \var{-Ss} switch (\seeo{Ss}). parser_e_proc_inline_not_supported=03016_E_פרוצדורת INLINE לא נתמכת % You tried to compile a program with C++ style inlining, and forgot to % specify the \var{-Si} option (\seeo{Si}). The compiler doesn't support C++ % styled inlining by default. parser_w_constructor_should_be_public=03018_W_יוצר צריך להיות ציבורי % Constructors must be in the 'public' part of an object (class) declaration. parser_w_destructor_should_be_public=03019_W_הורס צריך להיות ציבורי % Destructors must be in the 'public' part of an object (class) declaration. parser_n_only_one_destructor=03020_N_מחלקה צריכה הורס אחד בלבד % You can declare only one destructor for a class. parser_e_no_local_objects=03021_E_הגדרות מחלקה מקומיות אינם מורשות % Classes must be defined globally. They cannot be defined inside a % procedure or function parser_f_no_anonym_objects=03022_F_הגדרות מחלקה אנונימיות אינם מורשות % An invalid object (class) declaration was encountered, i.e. an % object or class without methods that isn't derived from another object or % class. For example: % \begin{verbatim} % Type o = object % a : longint; % end; % \end{verbatim} % will trigger this error. parser_n_object_has_no_vmt=03023_N_האובייקט "$1" ללא VMT % This is a note indicating that the declared object has no % virtual method table. parser_e_illegal_parameter_list=03024_E_רשימת פרמטרים לא חוקית % You are calling a function with parameters that are of a different type than % the declared parameters of the function. parser_e_wrong_parameter_size=03026_E_מספר שגוי של פרמטרים צוין עבור הקריאה ל "$1" % There is an error in the parameter list of the function or procedure, % the number of parameters is not correct. parser_e_overloaded_no_procedure=03027_E_מזהה המרובה שימוש "$1" אינו פונקציה % The compiler encountered a symbol with the same name as an overloaded % function, but it is not a function it can overload. parser_e_overloaded_have_same_parameters=03028_E_פונקציות מרובות שימוש מכילות את אותם רשימת פרמטרים % You're declaring overloaded functions, but with the same parameter list. % Overloaded function must have at least 1 different parameter in their % declaration. parser_e_header_dont_match_forward=03029_E_הגדרת הפונקציה אינה תואמת את ההגדרה הקודמת "$1" % You declared a function with same parameters but % different result type or function modifiers. parser_e_header_different_var_names=03030_E_הגדרת הפונקציה "$1" אינה תואמת את המימוש: שם משתנה השתנה $2 => $3 % You declared the function in the \var{interface} part, or with the % \var{forward} directive, but define it with a different parameter list. parser_n_duplicate_enum=03031_N_ערכים בסוג מניה חייבים להיות בסדר עולה % \fpc allows enumeration constructions as in C. Given the following % declaration two declarations: % \begin{verbatim} % type a = (A_A,A_B,A_E:=6,A_UAS:=200); % type a = (A_A,A_B,A_E:=6,A_UAS:=4); % \end{verbatim} % The second declaration would produce an error. \var{A\_UAS} needs to have a % value higher than \var{A\_E}, i.e. at least 7. parser_e_no_with_for_variable_in_other_segments=03033_E_With אינו מסוגל להשתמש במשתנים ממקטע שונה % With stores a variable locally on the stack, % but this is not possible if the variable belongs to another segment. parser_e_too_much_lexlevel=03034_E_פונקציה מקוננת > 31 % You can nest function definitions only 31 times. parser_e_range_check_error=03035_E_שגיאה בבדיקת טווח בעת הערכת קבועים % The constants are out of their allowed range. parser_w_range_check_error=03036_W_שגיאה בבדיקת טווח בעת הערכת קבועים % The constants are out of their allowed range. parser_e_double_caselabel=03037_E_הכזרת תווית כפולה בcase % You are specifying the same label 2 times in a \var{case} statement. parser_e_case_lower_less_than_upper_bound=03038_E_הטווח הסופי קטן מהטווח ההתחלתי % The upper bound of a \var{case} label is less than the lower bound and this % is useless parser_e_type_const_not_possible=03039_E_הכרזת טיפוס קבועים של מחלקות או ממשקים אסורה % You cannot declare a constant of type class or object. parser_e_no_overloaded_procvars=03040_E_משתנים של פונקציות מרובות שימוש אינם מורשות % You are trying to assign an overloaded function to a procedural variable. % This is not allowed parser_e_invalid_string_size=03041_E_אורך מחרוזת חייב להיות עם ערכים מ1 ל255 % The length of a shortstring in Pascal is limited to 255 characters. You are % trying to declare a string with length lower than 1 or greater than 255 parser_w_use_extended_syntax_for_objects=03042_W_השתמש בתחביר מורחב של NEW וDISPOSE לעותקים של אובייקט % If you have a pointer \var{a} to a class type, then the statement % \var{new(a)} will not initialize the class (i.e. the constructor isn't % called), although space will be allocated. you should issue the % \var{new(a,init)} statement. This will allocate space, and call the % constructor of the object parser_w_no_new_dispose_on_void_pointers=03043_W_השימוש במצביע לא מוגדר עם NEW ו DISPOSE חסר משמעות parser_e_no_new_dispose_on_void_pointers=03044_E_בלתי אפשרי להשתמש במצביע לא מוגדר עם NEW או DISPOSE % You cannot use \var{new(p)} or \var{dispose(p)} if \var{p} is an untyped pointer % because no size is associated to an untyped pointer. % Accepted for compatibility in \var{tp} and \var{delphi} modes. parser_e_class_id_expected=03045_E_מצפה למזהה מחלקה % This happens when the compiler scans a procedure declaration that contains % a dot, % i.e., a object or class method, but the type in front of the dot is not % a known type. parser_e_no_type_not_allowed_here=03046_E_סוג מזהה לא מורשה במיקום הנוכחי % You cannot use a type inside an expression. parser_e_methode_id_expected=03047_E_מצפה למזהה מתודי % This identifier is not a method. % This happens when the compiler scans a procedure declaration that contains % a dot, i.e., a object or class method, but the procedure name is not a % procedure of this type. parser_e_header_dont_match_any_member=03048_E_הגדרת הפונקציה לא זהה למתודות של המחלקה "$1" % This identifier is not a method. % This happens when the compiler scans a procedure declaration that contains % a dot, i.e., a object or class method, but the procedure name is not a % procedure of this type. parser_d_procedure_start=03049_DL_פרוצדורה/פונקציה $1 % When using the \var{-vd} switch, the compiler tells you when it starts % processing a procedure or function implementation. parser_e_error_in_real=03050_E_קבוע של מספר ממשי אינו חוקי % The compiler expects a floating point expression, and gets something else. parser_e_fail_only_in_constructor=03051_E_FAIL יכול להיות בשימוש רק בתוך יוצר % You are using the \var{fail} keyword outside a constructor method. parser_e_no_paras_for_destructor=03052_E_הורסים לא יכולים להכיל פרמטרים % You are declaring a destructor with a parameter list. Destructor methods % cannot have parameters. parser_e_only_class_members_via_class_ref=03053_E_Only class methods, class properties and class variables can be referred with class references % This error occurs in a situation like the following: % \begin{verbatim} % Type : % Tclass = Class of Tobject; % % Var C : TClass; % % begin % ... % C.free % \end{verbatim} % \var{Free} is not a class method and hence cannot be called with a class % reference. parser_e_only_class_members=03054_E_Only class methods, class properties and class variables can be accessed in class methods % This is related to the previous error. You cannot call a method of an object % from inside a class method. The following code would produce this error: % \begin{verbatim} % class procedure tobject.x; % % begin % free % \end{verbatim} % Because free is a normal method of a class it cannot be called from a class % method. parser_e_case_mismatch=03055_E_קבועים וסוג CASE אינם מתאימים % One of the labels is not of the same type as the case variable. parser_e_illegal_symbol_exported=03056_E_לא ניתן לייצא את הסמל מספרייה % You can only export procedures and functions when you write a library. You % cannot export variables or constants. parser_w_should_use_override=03057_W_מתודת ירושה נסתרת ע"י "$1" % A method that is declared \var{virtual} in a parent class, should be % overridden in the descendent class with the \var{override} directive. If you % don't specify the \var{override} directive, you will hide the parent method; % you will not override it. parser_e_nothing_to_be_overridden=03058_E_אין מתודה במחלקה של האב אשר ניתן לשכתב: "$1" % You are trying to \var{override} a virtual method of a parent class that does % not exist. parser_e_no_procedure_to_access_property=03059_E_לא ניתן מספר לגשת למאפיין % You specified no \var{read} directive for a property. parser_w_stored_not_implemented=03060_W_מאפיין שמור אינו מבוצע עדיין % The \var{stored} directive is not yet implemented parser_e_ill_property_access_sym=03061_E_סימן לא חוקי לגישת המאפיין % There is an error in the \var{read} or \var{write} directives for an array % property. When you declare an array property, you can only access it with % procedures and functions. The following code would cause such an error. % \begin{verbatim} % tmyobject = class % i : integer; % property x [i : integer]: integer read I write i; % \end{verbatim} % parser_e_cant_access_protected_member=03062_E_לא ניתן לגשת לשדה מוגן באובייקט הנוכחי % Fields that are declared in a \var{protected} section of an object or class % declaration cannot be accessed outside the module where the object is % defined, or outside descendent object methods. parser_e_cant_access_private_member=03063_E_לא ניתן לגשת לשדה פרטי באובקייט הנוכחי % Fields that are declared in a \var{private} section of an object or class % declaration cannot be accessed outside the module where the class is % defined. parser_e_overridden_methods_not_same_ret=03066_E_מתודה מרובת שימוש חייבת להיות זהה בסוג המשתנה: "$2" בשימוש ע"י "$1", אשר מכילה סוג משתנה אחר % If you declare overridden methods in a class definition, they must % have the same return type. parser_e_dont_nest_export=03067_E_הגדדרת פונקציות EXPORT לא יכולות להיות מקוננות % You cannot declare a function or procedure within a function or procedure % that was declared as an export procedure. parser_e_methods_dont_be_export=03068_E_אי אפשר לייצא את המתודה % You cannot declare a procedure that is a method for an object as % \var{export}ed. parser_e_call_by_ref_without_typeconv=03069_E_השימוש בפרמטר של משתנה חייב להיות זהה: מכיל "$1" מצפה ל"$2" % When calling a function declared with \var{var} parameters, the variables in % the function call must be of exactly the same type. There is no automatic % type conversion. parser_e_no_super_class=03070_E_המחלקה איננה מחלקת אב של המחלקה הנוכחית % When calling inherited methods, you are trying to call a method of a non-related % class. You can only call an inherited method of a parent class. parser_e_self_not_in_method=03071_E_SELF מורשה רק במתודות % You are trying to use the \var{self} parameter outside an object's method. % Only methods get passed the \var{self} parameters. parser_e_generic_methods_only_in_methods=03072_E_מתודות יכולות להיקרא ישירות רק בתוך מתודות אחרות עם סוג מזהה שלהמחלקה % A construction like \var{sometype.somemethod} is only allowed in a method. parser_e_illegal_colon_qualifier=03073_E_שימוש לא חוקי של ':' % You are using the format \var{:} (colon) 2 times on an expression that % is not a real expression. parser_e_illegal_set_expr=03074_E_שגיאה בבדיקת טווח בסדרת יוצרים או שכפול סדרה % The declaration of a set contains an error. Either one of the elements is % outside the range of the set type, either two of the elements are in fact % the same. parser_e_pointer_to_class_expected=03075_E_מצפה למצביע אובייקט % You specified an illegal type in a \var{new} statement. % The extended syntax of \var{new} needs an object as a parameter. parser_e_expr_have_to_be_constructor_call=03076_E_הביטוי חייב להיות קריאת יוצר % When using the extended syntax of \var{new}, you must specify the constructor % method of the object you are trying to create. The procedure you specified % is not a constructor. parser_e_expr_have_to_be_destructor_call=03077_E_הביטוי חייב להיות קריאת הורס % When using the extended syntax of \var{dispose}, you must specify the % destructor method of the object you are trying to dispose of. % The procedure you specified is not a destructor. parser_e_invalid_record_const=03078_E_סדר לא חוקי של אלמנטים ברשומה % When declaring a constant record, you specified the fields in the wrong % order. parser_e_false_with_expr=03079_E_סוג ביטוי חייב להיות ביטוי רשומה או מחלקה % A \var{with} statement needs an argument that is of the type \var{record} % or \var{class}. You are using \var{with} on an expression that is not of % this type. parser_e_void_function=03080_E_פרוצדורה לא יכולה להחזיר ערך % In \fpc, you can specify a return value for a function when using % the \var{exit} statement. This error occurs when you try to do this with a % procedure. Procedures cannot return a value. parser_e_only_methods_allowed=03081_E_היוצרים וההורסים חייבים להיות מתודיים % You're declaring a procedure as destructor or constructor, when the % procedure isn't a class method. parser_e_operator_not_overloaded=03082_E_האופריטור לא מרובה שימוש % You're trying to use an overloaded operator when it is not overloaded for % this type. parser_e_no_such_assignment=03083_E_לא ניתן להציב ערכים לסוגים מרובי שימוש % You can not overload assignment for types % that the compiler considers as equal. parser_e_overload_impossible=03084_E_בלתי אפשרי להשתמש באופרטור מרובה שימוש % The combination of operator, arguments and return type are % incompatible. parser_e_no_reraise_possible=03085_E_לא ניתן להרים חריגה % You are trying to raise an exception where it is not allowed. You can only % raise exceptions in an \var{except} block. parser_e_no_new_or_dispose_for_classes=03086_E_התחביר המורחב של NEW או DISPOSE לא מורשה למחלקות % You cannot generate an instance of a class with the extended syntax of % \var{new}. The constructor must be used for that. For the same reason, you % cannot call \var{dispose} to de-allocate an instance of a class, the % destructor must be used for that. parser_e_procedure_overloading_is_off=03088_E_האפשרות לפרוצדורות מרובות שימוש כבוי % When using the \var{-So} switch, procedure overloading is switched off. % Turbo Pascal does not support function overloading. parser_e_overload_operator_failed=03089_E_לא ניתן להעמיס על סוג האופרטור הנוכחי. העמסת האופרטורים הקשורים לפעולה (אם בכלל) הם: $1 % You are trying to overload an operator which cannot be overloaded. % The following operators can be overloaded : % \begin{verbatim} % +, -, *, /, =, >, <, <=, >=, is, as, in, **, := % \end{verbatim} parser_e_comparative_operator_return_boolean=03090_E_אופרטור השוואתי חייב להחזיר ערך בוליאני % When overloading the \var{=} operator, the function must return a boolean % value. parser_e_only_virtual_methods_abstract=03091_E_רק שיטה ווירטואלית יכולה להיות מופשט % You are declaring a method as abstract, when it is not declared to be % virtual. parser_f_unsupported_feature=03092_F_שימוש באופציה לא נתמכת! % You're trying to force the compiler into doing something it cannot do yet. parser_e_mix_of_classes_and_objects=03093_E_הערבוב של עצמים שונים (מחלקות, עצם, ממשק וכו') אינו מורשה % You cannot derive \var{objects}, \var{classes}, \var{cppclasses} and \var{interfaces} interttwined . E.g. % a class cannot have an object as parent and vice versa. parser_w_unknown_proc_directive_ignored=03094_W_מתעלם מהנחית השגרה: "$1" % The procedure directive you specified is unknown. parser_e_directive_only_one_var=03095_E_$1 can be associated with only one variable % You cannot specify more than one variable before the \var{absolute}, \var{export}, \var{external}, % \var{weakexternal}, \var{public} and \var{cvar} directives. % As a result, for example the following construct will provide this error: % \begin{verbatim} % Var Z : Longint; % X,Y : Longint absolute Z; % \end{verbatim} parser_e_absolute_only_to_var_or_const=03096_E_ניתן להשתמש בabsolute רק עם משתנה או קבוע % The address of a \var{absolute} directive can only point to a variable or % constant. Therefore, the following code will produce this error: % \begin{verbatim} % Procedure X; % % var p : longint absolute x; % \end{verbatim} % parser_e_initialized_only_one_var=03097_E_ניתן לאתחל רק משתנה אחד % You cannot specify more than one variable with a initial value % in Delphi mode. parser_e_abstract_no_definition=03098_E_מתודה מופשטת אינה זקוקה להגדרה (עם גוף של פונקציה) % Abstract methods can only be declared, you cannot implement them. They % should be overridden by a descendant class. parser_e_overloaded_must_be_all_global=03099_E_העמסת היתר של הפונקציה אינה יכולה להיות מקומית (חייבת להיות מיוצאת) % You are defining a overloaded function in the implementation part of a unit, % but there is no corresponding declaration in the interface part of the unit. parser_w_virtual_without_constructor=03100_W_שימוש במתודות ווירטואליות ללא יוצר ב "$1" % If you declare objects or classes that contain virtual methods, you need % to have a constructor and destructor to initialize them. The compiler % encountered an object or class with virtual methods that doesn't have % a constructor/destructor pair. parser_c_macro_defined=03101_CL_הגדרת מאקרו: $1 % When \var{-vc} is used, the compiler tells you when it defines macros. parser_c_macro_undefined=03102_CL_מאקרו לא מוגדר: $1 % When \var{-vc} is used, the compiler tells you when it undefines macros. parser_c_macro_set_to=03103_CL_מאקרו $1 מוגדר כ $2 % When \var{-vc} is used, the compiler tells you what values macros get. parser_i_compiling=03104_I_מהדר $1 % When you turn on information messages (\var{-vi}), the compiler tells you % what units it is recompiling. parser_u_parsing_interface=03105_UL_מפרש את הממשק של היחידה $1 % This tells you that the reading of the interface % of the current unit starts parser_u_parsing_implementation=03106_UL_מפרש את הביצוע של $1 % This tells you that the code reading of the implementation % of the current unit, library or program starts parser_d_compiling_second_time=03107_DL_מהדר את $1 בפעם השנייה % When you request debug messages (\var{-vd}) the compiler tells you what % units it recompiles for the second time. parser_e_no_property_found_to_override=03109_E_לא נמצאה תכונה לעקיפה % You want to override a property of a parent class, when there is, in fact, % no such property in the parent class. parser_e_only_one_default_property=03110_E_רק תכונה אחת עם ברירת מחדל מורשת % You specified a property as \var{Default}, but the class already has a % default property, and a class can have only one default property. parser_e_property_need_paras=03111_E_התונה עם ברירת מחדל חייבת להיות תכונה של מערך % Only array properties of classes can be made \var{default} properties. parser_e_constructor_cannot_be_not_virtual=03112_E_יוצרים ווירטואלים נתמכים רק במחלקה % You cannot have virtual constructors in objects. You can only have them % in classes. parser_e_no_default_property_available=03113_E_ערך ברירת מחדל אינו קיים לתכונה % You are trying to access a default property of a class, but this class (or one of % its ancestors) doesn't have a default property. parser_e_cant_have_published=03114_E_המחלקה אינה יכולה להכיל את חתך published, השתמש במתג {$M+} % If you want a \var{published} section in a class definition, you must % use the \var{\{\$M+\}} switch, whch turns on generation of type % information. parser_e_forward_declaration_must_be_resolved=03115_E_נדרשת הגדרה ראשונית של המחלקה "$1" לפני השימוש בה כמחלקה יורשת % To be able to use an object as an ancestor object, it must be defined % first. This error occurs in the following situation: % \begin{verbatim} % Type ParentClas = Class; % ChildClass = Class(ParentClass) % ... % end; % \end{verbatim} % Where \var{ParentClass} is declared but not defined. parser_e_no_local_operator=03116_E_השימוש באופריטור מקומי אינו נתמך % You cannot overload locally, i.e. inside procedures or function % definitions. parser_e_proc_dir_not_allowed_in_interface=03117_E_מקדם שיגרה "$1" אינו מורשה בשימוש בתוך הממשק % This procedure directive is not allowed in the \var{interface} section of % a unit. You can only use it in the \var{implementation} section. parser_e_proc_dir_not_allowed_in_implementation=03118_E_מקדם שיגרה "$1" אינו מורשה בחלק הביצועי % This procedure directive is not defined in the \var{implementation} section of % a unit. You can only use it in the \var{interface} section. parser_e_proc_dir_not_allowed_in_procvar=03119_E_מקדם שיגרה "$1" אינו מורשה כחלק מהגדרת השיגרה % This procedure directive cannot be part of a procedural or function % type declaration. parser_e_function_already_declared_public_forward=03120_E_הגדרת הפונקציה "$1" כבר בוצעה % You will get this error if a function is defined as \var{forward} twice. % Or it is once in the \var{interface} section, and once as a \var{forward} % declaration in the \var{implmentation} section. parser_e_not_external_and_export=03121_E_לא ניתן להשתמש גם ב EXPORT וגם EXTERNAL % These two procedure directives are mutually exclusive parser_n_not_supported_for_inline=03123_N_"$1" אינו נתמך עדיין בתוך פונקצית/שגרת inline % Inline procedures don't support this declaration. parser_h_inlining_disabled=03124_H_השימוש הישיר מבוטל % Inlining of procedures is disabled. parser_i_writing_browser_log=03125_I_כותב יומן דפדפן $1 % When information messages are on, the compiler warns you when it % writes the browser log (generated with the \var{\{\$Y+ \}} switch). parser_h_maybe_deref_caret_missing=03126_H_ייתכן כי חסר תוכן למצביע % The compiler thinks that a pointer may need a dereference. parser_f_assembler_reader_not_supported=03127_F_אין תמיכה במאסף הנבחר % The selected assembler reader (with \var{\{\$ASMMODE xxx\}} is not % supported. The compiler can be compiled with or without support for a % particular assembler reader. parser_e_proc_dir_conflict=03128_E_מקדם השיגרה "$1" מתנגש עם מקדמים אחרים % You specified a procedure directive that conflicts with other directives. % for instance \var{cdecl} and \var{pascal} are mutually exclusive. parser_e_call_convention_dont_match_forward=03129_E_השימוש בהגדרה הנוכחית אינו זהה להגדרה הראשונית % This error happens when you declare a function or procedure with % e.g. \var{cdecl;} but omit this directive in the implementation, or vice % versa. The calling convention is part of the function declaration, and % must be repeated in the function definition. parser_e_property_cant_have_a_default_value=03131_E_תכונות אינן יכולות להכיל ערך ברירת מחדל % Set properties or indexed properties cannot have a default value. parser_e_property_default_value_must_const=03132_E_ערך ברירת המחדלק שת התכונה חייב להיות קבוע % The value of a \var{default} declared property must be known at compile % time. The value you specified is only known at run time. This happens % .e.g. if you specify a variable name as a default value. parser_e_cant_publish_that=03133_E_הסמל אינו יכול להיות בשימוש בתוך מחלקה ללא הגדרתו בתוך המחלקה % Only class type variables can be in a \var{published} section of a class % if they are not declared as a property. parser_e_cant_publish_that_property=03134_E_סוג זה של תכונה אינו יכול להיות בשימוש % Properties in a \var{published} section cannot be array properties. % they must be moved to public sections. Properties in a \var{published} % section must be an ordinal type, a real type, strings or sets. parser_e_empty_import_name=03136_E_נדרש שם ייבוא % Some targets need a name for the imported procedure or a \var{cdecl} specifier parser_e_division_by_zero=03138_E_חלוק באפס % There is a division by zero encounted parser_e_invalid_float_operation=03139_E_פעולת עשרונית לא חוקית % An operation on two real type values produced an overflow or a division % by zero. parser_e_array_lower_less_than_upper_bound=03140_E_הגבול העליון נמוך יותר מהגבול התחתון % The upper bound of a an array declaration is less than the lower bound and this % is not possible parser_w_string_too_long=03141_W_אורך המחרוזת של "$1" ארוך יותר מ "$1" % The size of the constant string is larger than the size you specified in % string type definition parser_e_string_larger_array=03142_E_אורך המחרוזת ארוך יותר מאורך מערך התווים % The size of the constant string is larger than the size you specified in % the array[x..y] of char definition parser_e_ill_msg_expr=03143_E_התוכן של הביטוי לאחר ההודעה אינו חוקי % \fpc supports only integer or string values as message constants parser_e_ill_msg_param=03144_E_טיפול בהודעות חייב להיות במבנה קבוע של פרמטרים % A method declared with the \var{message}-directive as message handler % can take only one parameter which must be declared as call by reference % Parameters are declared as call by reference using the \var{var}-directive parser_e_duplicate_message_label=03145_E_תווית הודעה כפולה: "$1" % A label for a message is used twice in one object/class parser_e_self_in_non_message_handler=03146_E_Self חייב להיות פרמטר במתודה של מטפל ההודעות % The self parameter can only be passed explicitly to a method which % is declared as message handler. parser_e_threadvars_only_sg=03147_E_Threadvars חייבים להיות סטטיים או גלובליים % Threadvars must be static or global, you can't declare a thread % local to a procedure. Local variables are always local to a thread, % because every thread has its own stack and local variables % are stored on the stack parser_f_direct_assembler_not_allowed=03148_F_השימוש במאסף הנוכחי אינו תומך בוסג התוצאה הבינארית % You can't use direct assembler when using a binary writer, choose an % other outputformat or use another assembler reader parser_w_no_objpas_use_mode=03149_W_אסור לקרוא ליחידת OBJPAS ישירות, יש להשתמש ב \{\$mode objfpc\} או ב \{\$mode delphi\} במקום % You are trying to load the ObjPas unit manually from a uses clause. This is % not a good idea. Use the \var{\{\$mode objfpc\}} or % \var{\{\$mode delphi\}} % directives which load the unit automatically parser_e_no_object_override=03150_E_OVERRIDE אינו יכול להיות בשימוש באובייקטים % Override is not supported for objects, use \var{virtual} instead to override % a method of a parent object parser_e_cant_use_inittable_here=03151_E_טיפוסי נתונים אשר דורשים אתחול או סיכום אינם יכולים להיות ברשומות variant % Some data type (e.g. \var{ansistring}) needs initialization/finalization % code which is implicitly generated by the compiler. Such data types % can't be used in the variant part of a record. parser_e_resourcestring_only_sg=03152_E_לא ניתן להגדיר Resourcestring בתור הגדרה מקומית, רק הגדרה גלובלית או סטטית % Resourcestring can not be declared local, only global or using the static % directive. parser_e_exit_with_argument_not__possible=03153_E_השימוש בשיגרה exit אינו יכול להתבצע במיקום הנוכחי % an exit statement with an argument for the return value can't be used here, this % can happen e.g. in \var{try..except} or \var{try..finally} blocks parser_e_stored_property_must_be_boolean=03154_E_טיפוס הנתונים בסימול האחסון חייב להיות בוליאני % If you specify a storage symbol in a property declaration, it must be of % the type boolean parser_e_ill_property_storage_sym=03155_E_הסימול אינו יכול להשמש כסימול לאחסון % You can't use this type of symbol as storage specifier in property % declaration. You can use only methods with the result type boolean, % boolean class fields or boolean constants parser_e_only_publishable_classes_can_be_published=03156_E_רק מחלקה המהודרת במצב $M+ יכולה להיות איזור ה published % In the published section of a class can be only class as fields used which % are compiled in \var{\{\$M+\}} or which are derived from such a class. Normally % such a class should be derived from TPersitent parser_e_proc_directive_expected=03157_E_מצפה להנחיית שיגרה % This error is triggered when you have a \var{\{\$Calling\}} directive without % a calling convention specified. % It also happens when declaring a procedure in a const block and you % used a ; after a procedure declaration which must be followed by a % procedure directive. % Correct declarations are: % \begin{verbatim} % const % p : procedure;stdcall=nil; % p : procedure stdcall=nil; % \end{verbatim} parser_e_invalid_property_index_value=03158_E_הערך האינדקס של התכונה חייב להיות טיפוס מסודר % The value you use to index a property must be of an ordinal type, for % example an integer or enumerated type. parser_e_procname_to_short_for_export=03159_E_שם השגרה קצר מידי לייצוא % The length of the procedure/function name must be at least 2 characters % long. This is because of a bug in dlltool which doesn't parse the .def % file correct with a name of length 1. parser_e_dlltool_unit_var_problem=03160_E_לא ניתן לייצר חלק DEFFILE למשתנים גלובליים ביחידה parser_e_dlltool_unit_var_problem2=03161_E_הדר ללא שימוש ב -WD % You need to compile this file without the -WD switch on the % commandline parser_f_need_objfpc_or_delphi_mode=03162_F_יש להשתמש במצב ObjFpc (-S2) או במצב Delphi (-Sd) להדר את המודול % You need to use \{\$mode objfpc\} or \{\$mode delphi\} to compile this file. % Or use the equivalent commandline switches -S2 or -Sd. parser_e_no_export_with_index_for_target=03163_E_אי אפשר לייצא עם אינדקס תחת $1 % Exporting of functions or procedures with a specified index is not % supported on this target. parser_e_no_export_of_variables_for_target=03164_E_ייצוא של משתמש אינו נתמך ב$1 % Exporting of variables is not supported on this target. parser_e_improper_guid_syntax=03165_E_תחביר GUID אינו חוקי % The GUID indication does not have the proper syntax. It should be of the form % \begin{verbatim} % {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} % \end{verbatim} % Where each \var{X} represents a hexadecimal digit. parser_w_interface_mapping_notfound=03168_W_השגרה "$1" נמצאה אך ללא הפרמטרים המבוקשים של $2.$3 % The compiler cannot find a suitable procedure which implements the given method of an interface. % A procedure with the same name is found, but the arguments do not match. parser_e_interface_id_expected=03169_E_מצפה למזהה ממשק % This happens when the compiler scans a \var{class} declaration that contains % \var{interface} function name mapping code like this: % \begin{verbatim} % type % TMyObject = class(TObject, IDispatch) % function IUnknown.QueryInterface=MyQueryInterface; % .... % \end{verbatim} % and the \var{interface} before the dot not listed in the inheritance list. parser_e_type_cant_be_used_in_array_index=03170_E_הסוג "$1" אינו יכול להיות בשימוש בתור סוג אינדקס למערך % Types like \var{qword} or \var{int64} aren't allowed as array index type parser_e_no_con_des_in_interfaces=03171_E_יוצר והורס אינם מורשים בממשקים % Constructor and destructor declarations aren't allowed in interface % In the most cases the method \var{QueryInterface} of \var{IUnknown} can % be used to create a new interface. parser_e_no_access_specifier_in_interfaces=03172_E_מזהה כניסה אינו יכול להיות בשימוש עם ממשקים % The access specifiers \var{public}, \var{private}, \var{protected} and % \var{pusblished} can't be used in interfaces because all methods % of an interfaces must be public. parser_e_no_vars_in_interfaces=03173_E_ממשק אינו יכול להכיל שדות % Declarations of fields aren't allowed in interfaces. An interface % can contain only methods parser_e_no_local_proc_external=03174_E_לא ניתן להגדיר שגרה מקומית כחיצונית % Declaring local procedures as external is not possible. Local procedures % get hidden parameters that will make the chance of errors very high parser_w_skipped_fields_before=03175_W_חלק מהשדות הבאים לפני "$1" לא אותחלו % In Delphi mode, not all fields of a typed constant record have to be % initialized, but the compiler warns you when it detects such situations. parser_e_skipped_fields_before=03176_E_חלק מהשדות הבאים לפני "$1" לא אותחלו % In all syntax modes but Delphi mode, you can't leave some fields uninitialized % in the middle of a typed constant record parser_w_skipped_fields_after=03177_W_חלק מהשדות הבאים אחרי "$1" לא אותחלו % You can leave some fields at the end of a type constant record uninitialized % (the compiler will initialize them to zero automatically). This may be the cause % of subtle problems. parser_e_varargs_need_cdecl_and_external=03178_E_השימוש בVarArgs (או '...' בMacPas) חייב להיות בשימוש עם CDecl/CPPDecl/MWPascal ו External % The varargs directive (or the ``...'' varargs parameter in MacPas mode) can only be used with procedures or functions % that are declared with \var{external} and one of \var{cdecl}, \var{cppdecl} and \var{mwpascal}. This functionality % is only supported to provide a compatible interface to C functions like printf. parser_e_self_call_by_value=03179_E_Self חייב להיות פרמטר רגיל (call-by-value) % You can't declare self as a const or var parameter, it must always be % a call-by-value parameter parser_e_interface_has_no_guid=03180_E_הממשק "$1" אינו מכיל מזהה GUID % When you want to assign an interface to a constant, then the interface % must have a GUID value set. parser_e_illegal_field_or_method=03181_E_המזהה של שדה או מתודה של מחלקה "$1" אינם ידועים % Properties must refer to a field or method in the same class. parser_w_proc_overriding_calling=03182_W_עולה על מוסכמות הפעלה "$1" עם "$2" % There are two directives in the procedure declaration that specify a calling % convention. Only the last directive will be used parser_e_no_procvarobj_const=03183_E_ניתן לאתחל טיפוס קבוע של "procedure of object" רק עם NIL % You can't assign the address of a method to a typed constant which has a % 'procedure of object' type, because such a constant requires two addresses: % that of the method (which is known at compile time) and that of the object or % class instance it operates on (which can not be known at compile time). parser_e_default_value_only_one_para=03184_E_ערך ברירת מחדל יכול להיות בשימוש רק עם פרמטר אחד % It is not possible to specify a default value for several parameters at once. % The following is invalid: % \begin{verbatim} % Procedure MyProcedure (A,B : Integer = 0); % \end{verbatim} % Instead, this should be declared as % \begin{verbatim} % Procedure MyProcedure (A : Integer = 0; B : Integer = 0); % \end{verbatim} parser_e_default_value_expected_for_para=03185_E_פרמטר ברירת מחדל דרוש עבור "$1" % The specified parameter requires a default value. parser_w_unsupported_feature=03186_W_שימוש במאפיין לא נתמך ! % You're trying to force the compiler into doing something it cannot do yet. parser_h_c_arrays_are_references=03187_H_מערכים של C מועברים כהפניה % Any array passed to a C functions is passed % by a pointer (i.e. by reference). parser_e_C_array_of_const_must_be_last=03188_E_מערך C של קבוע חייב להיות הארגומנט האחרון % You can not add any other argument after an \var{array of const} for % \var{cdecl} functions, as the size pushed on stack for this argument is % not known. parser_h_type_redef=03189_H_הגדרה מחודשת של הטיפוס "$1" % This is an indicator that a previously declared type is % being redefined as something else. This may, or may not % be, a cause for errors. parser_w_cdecl_has_no_high=03190_W_אין לפונקציות cdecl פרמטר גבוהה % Functions declared with cdecl modifier do not pass an extra implicit parameter. parser_w_cdecl_no_openstring=03191_W_פונקציות cdecel אינן תומכות ב open string % Openstring is not supported for cdecl'ared functions. parser_e_initialized_not_for_threadvar=03192_E_אין אפשרות לאתחל משתנה המוגדר כthreadvar % Variables declared as threadvar can not be initialized with a default value. % The variables will always be filled with zero at the start of a new thread. parser_e_msg_only_for_classes=03193_E_ניתן להשתמש בהנחיית message רק בתוך מחלקה % The message directive is only supported for Class types. parser_e_procedure_or_function_expected=03194_E_מצפה לשיגרה או פונקציה % A class method can only be specified for procedures and functions. parser_e_illegal_calling_convention=03195_W_מתעלם ממוסכמת ההפעלה: "$1" % Some calling conventions are supported only by certain CPUs. I.e. most non-i386 ports support % only the standard ABI calling convention of the CPU. parser_e_no_object_reintroduce=03196_E_לא ניתן להשתמש בREINTRODUCE בתוך אובייקט % \var{reintroduce} is not supported for objects. parser_e_paraloc_only_one_para=03197_E_כל ארגומנט חייב להכיל מיקום עצמאי. % If locations for arguments are specified explicitly as it is required by % some syscall conventions, each argument must have it's only location, things % like \var{procedure p(i,j : longint 'r1');} aren't allowed parser_e_paraloc_all_paras=03198_E_כל ארגומנט חייב להכיל מיקום מוגדר % If one argument has an explicit argument location, all arguments of a procedure % must have one. parser_e_illegal_explicit_paraloc=03199_E_מיקום ארגומנט לא ידוע % The location specified for an argument isn't recognized by the compiler parser_e_32bitint_or_pointer_variable_expected=03200_E_מצפה לסוג משתנה של מספר שלם 32-Bit או מצביע % The libbase for MorphOS/AmigaOS can be give only as \var{longint}, \var{dword} or any pointer variable. parser_e_goto_outside_proc=03201_E_לא ניתן להשמש בgoto בין שני שיגרות % It isn't allowed to use the \var{goto} statements referencing labels outside the % current procedure. The following example shows the problem: % \begin{verbatim} % ... % procedure p1; % label % l1; % % procedure p2; % begin % goto l1; // This goto ISN'T allowed % end; % % begin % p2 % l1: % end; % ... % % \end{verbatim} parser_f_too_complex_proc=03202_F_השיגרה מסובכת מידי ודורשת שימוש של אוגרים רבים מידי % Your procedure body is too long for the compiler. You should split the % procedure into multiple smaller procedures. parser_e_illegal_expression=03203_E_ביטוי לא חוקי % This can occur under many circumstances. Mostly when trying to evaluate % constant expressions. parser_e_invalid_integer=03204_E_הביטוי של המספר השלם אינו חוקי % You made an expression which isn't an integer, and the compiler expects the % result to be an integer. parser_e_invalid_qualifier=03205_E_שימוש לא חוקי במבחין % One of the following is happening : % \begin{itemize} % \item You're trying to access a field of a variable that is not a record. % \item You're indexing a variable that is not an array. % \item You're dereferencing a variable that is not a pointer. % \end{itemize} parser_e_upper_lower_than_lower=03206_E_טווח ההגבלה הגבוהה קטן מטווח ההגבלה הנמוכה % You are declaring a subrange, and the lower limit is higher than the high % limit of the range. parser_e_macpas_exit_wrong_param=03207_E_הפרמטר של Exit חייב להיות שם השיגרה תחתיו הוא נמצא % Non local exit is not allowed. This error occurs only in mode MacPas. parser_e_illegal_assignment_to_count_var=03208_E_הצבה לא חוקית של המשתנה בלולאת ה for "$1" % The type of a \var{for} loop variable must be an ordinal type. % Loop variables cannot be reals or strings. You can also not assign values to % loop variables inside the loop (except in Delphi and TP modes). Use a while or % repeat loop instead if you need to do something like that, since those % constructs were built for that. parser_e_no_local_var_external=03209_E_לא ניתן להגדיר משתנים מקומיים כחיצוניים % Declaring local variables as external is not allowed. Only global variables can reference % to external variables. parser_e_proc_already_external=03210_E_השיגרה כבר מוגדרת כחיצונית % The procedure is already declared with the EXTERNAL directive in an interface or % forward declaration. parser_w_implicit_uses_of_variants_unit=03211_W_שימוש משתמע ביחידת Variants % The Variant type is used in the unit without any used unit using the Variants unit. The % compiler has implicitly added the Variants unit to the uses list. To remove this warning % the Variants unit needs to be added to the uses statement. parser_e_no_static_method_in_interfaces=03212_E_השימוש במחלקה ומתודות סטטיים אינם יכוליות להיות בשימוש בממשק % The specifier \var{class} and directive \var{static} can't be used in interfaces % because all methods of an interfaces must be public. parser_e_arithmetic_operation_overflow=03213_E_גלישה בפעולה מתמטית % An operation on two integers values produced an overflow parser_e_protected_or_private_expected=03214_E_מצפה לאיזור Protected או Private % \var{strict} can be only used together with \var{protected} or \var{private}. parser_e_illegal_slice=03215_E_SLICE אינ יכול להיות בשימוש מחוץ לרשימת פרמטרים % \var{slice} can be used only for arguments accepting an open array parameter parser_e_dispinterface_cant_have_parent=03216_E_מחלקת DISPINTERFACE אינה יכולה להכיל הורה % A DISPINMTERFACE is a special type of interface which can't have a parent class parser_e_dispinterface_needs_a_guid=03217_E_DISPINTERFACE חייב GUID % A DISPINMTERFACE always needs an interface identification parser_w_overridden_methods_not_same_ret=03218_W_המתודות החדשות חייבות להחזיר את אותו טיפוס נתונים. הקוד הנוכחי יכול לגרום לקריסה בעקבות באג של המפרש של דלפי (“$2” עולה על “$1” אשר מכיל טיפוס נתונים אחר בהחזרה) % If you declare overridden methods in a class definition, they must % have the same return type. Some versions of Delphi allow you to change the % return type of interface methods, and even to change procedures into % functions, but the resulting code may crash depending on the types used % and the way the methods are called. parser_e_dispid_must_be_ord_const=03219_E_מזהה Dispatch חייב להיות קבוע בעל ערך סידורי % The \var{dispid} keyword must be followed by an ordinal constant (the dispid index). parser_e_array_range_out_of_bounds=03220_E_הטווח של המערך גבוהה מידי % Regardless of the size taken up by its elements, an array cannot have more % than high(ptrint) elements. Additionally, the range type must be a subrange % of ptrint. parser_e_packed_element_no_var_addr=03221_E_לא ניתן למצוא את הכתובת של ביט המערך ארוז, אלמנטים או שדות של המערך % If you declare an array or record as \var{packed} in Mac Pascal mode (or as \var{packed} in any mode with \var{\{\$bitpacking on\}}), it will % be packed at the bit level. This means it becomes impossible to take addresses % of individual array elements or record fields. The only exception to this rule is in case of packed arrays elements % whose packed size is a multple of 8 bits. parser_e_packed_dynamic_open_array=03222_E_לא ניתן לארוז מערך דינאמי % Only regular (and possibly in the future also open) arrays can be packed parser_e_packed_element_no_loop=03223_E_אלמנטים ושדות של מערכי ביט ארוזים אינם יכולים לשמש כמשתנים ללולאות % If you declare an array or record as \var{packed} in Mac Pascal mode (or as \var{packed} in any mode with \var{\{\$bitpacking on\}}), it will % be packed at the bit level. For performance reasons, they cannot be % used as loop variables. parser_e_type_var_const_only_in_records_and_classes=03224_E_VAR, TYPE and CONST are allowed only in records, objects and classes % The usage of VAR, TYPE and CONST to declare new types inside an object is allowed only inside % records, objects and classes. parser_e_cant_create_generics_of_this_type=03225_E_הטיפוס אינו יכול להיות generic % Only Classes, Objects, Interfaces and Records are allowed to be used as generic parser_w_no_lineinfo_use_switch=03226_W_אין לטעון את הספרייה LINEINFO בצורה ידנית. על מנת להשתמש בספרייה יש להשתמש במתג -gl במקום % Do not use the LINEINFO unit directly, Use the \var{-gl} switch which automatically adds the % unit for reading the selected type of debugging information instead. parser_e_no_funcret_specified=03227_E_לא צויין טיפוס החזרה עבור הפונקציה "$1" % The first time you declare a function you have to declare it completely, % including all parameters and the result type. parser_e_special_onlygenerics=03228_E_השימוש בSpecialization מורשה רק כאשר משתמשים בטיפוסי generic % Types not being generics can't be specialized parser_e_no_generics_as_params=03229_E_לא ניתן להשתמש בgenerics בתור פרמטרים כאשר יש שימוש ב spezializing generics % When specializing a generic, only non-generic types can be used as parameters. parser_e_type_object_constants=03230_E_השימוש בקבועים של אובייקטים המכילים VMT אינו מורשה % If an object requires a VMT either because it contains a constructor or virtual methods, % it's not allowed to create constants of it. In TP and Delphi mode this is allowed % for compatibility reasons. parser_e_label_outside_proc=03231_E_שימוש בכתובת של תוויות המוכרזות מחוץ למתחם הנוכחי אינו מורשה % It isn't allowed to take the addresss of labels outside the % current procedure. parser_e_initialized_not_for_external=03233_E_לא ניתן לאתחל ערך ברירת מחדל למשתנים המוגדרים כexternal % Variables declared as external can not be initialized with a default value. parser_e_illegal_function_result=03234_E_טיפוס החזרה של הפונקציה אינו חוקי % Some types like file types can not be used as function result parser_e_no_common_type=03235_E_אין טיפוס משותף ל "$1" ו "$2" % To perform an operation beween integers, the compiler converts both operands % to their common type, which appears to be an invalid type. To determine the % common type of the operands, the compiler takes the minimum of the minimal values % of both types, and the maximum of the maximal values of both types. The common % type is then minimum..maximum. parser_e_no_generics_as_types=03236_E_Generics ללא specialization אינו יכול להיות בשימוש בתור טיפוס למשתנה % Generics must be always specialized before being used as variable type parser_w_register_list_ignored=03237_W_מתעלם מרשימת האוגרים עבור שגרות assemblter טהורות % When using pure assembler routines, the list with modified registers is ignored. % \end{description} # # Type Checking # # 04049 is the last used one # % \section{Type checking errors} % This section lists all errors that can occur when type checking is % performed. % \begin{description} parser_e_implements_must_be_class_or_interface=03238_E_Implements property must have class or interface type % A property which implements an interface must be of type class or interface. parser_e_implements_must_have_correct_type=03239_E_Implements-property must implement interface of correct type, found "$1" expected "$2" % A property which implements an interface actually implements a different interface. parser_e_implements_must_read_specifier=03240_E_Implements-property must have read specifier % A property which implements an interface must have at least a read specifier. parser_e_implements_must_not_have_write_specifier=03241_E_Implements-property must not have write-specifier % A property which implements an interface may not have a write specifier. parser_e_implements_must_not_have_stored_specifier=03242_E_Implements-property must not have stored-specifier % A property which implements an interface may not have a stored specifier. parser_e_implements_uses_non_implemented_interface=03243_E_Implements-property used on unimplemented interface: "$1" % The interface which is implemented by a property is not an interface implemented by the class. parser_e_unsupported_real=03244_E_Floating point not supported for this target % The compiler parsed a floating point expression, but it is not supported. parser_e_class_doesnt_implement_interface=03245_E_Class "$1" does not implement interface "$2" % The delegated interface is not implemented by the class given in the implements clause. parser_e_class_implements_must_be_interface=03246_E_Type used by implements must be an interface % The \var{implements} keyword must be followed by an interface type. parser_e_cant_export_var_different_name=03247_E_Variables cannot be exported with a different name on this target, add the name to the declaration using the "export" directive (variable name: $1, declared export name: $2) % On most targets it is not possible to change the name under which a variable % is exported inside the \var{exports} statement of a library. % In that case, you have to specify the export name at the point where the % variable is declared, using the \var{export} and \var{alias} directives. parser_e_weak_external_not_supported=03248_E_Weak external symbols are not supported for the current target % A "weak external" symbol is a symbol which may or may not exist at (either static % or dynamic) link time. This concept may not be available (or implemented yet) % on the current cpu/OS target. parser_e_forward_mismatch=03249_E_Forward type definition does not match % Classes and interfaces being defined forward must have the same type % when being implemented. A forward interface cannot be changed into a class. parser_n_ignore_lower_visibility=03250_N_Virtual method "$1" has a lower visibility ($2) than parent class $3 ($4) % The virtual method overrides an method that is declared with a higher visibility. This might give % unexpected results. E.g., in case the new visibility is private then a call to ``inherited'' in a % new child class will call the higher-visible method in a parent class and ignores the private method. parser_e_field_not_allowed_here=03251_E_Fields cannot appear after a method or property definition, start a new visibility section first % Once a method or property has been defined in a class or object, you cannot define any fields afterwards % without starting a new visibility section (such as \var{public}, \var{private}, etc.). The reason is % that otherwise the source code can appear ambiguous to the compiler, since it is possible to use modifiers % such as \var{default} and \var{register} also as field names. parser_e_no_local_para_def=03252_E_Parameters or result types cannot contain local type definitions. Use a separate type definition in a type block. % In Pascal, types are not considered to be identical simply because they are semantically equivalent. % Two variables or parameters are only considered to be of the same type if they refer to the % same type definition. % As a result, it is not allowed to define new types inside parameter lists, because then it is impossible to % refer to the same type definition in the procedure headers of the interface and implementation of a unit % (both procedure headers would define a separate type). Keep in mind that expressions such as % ``file of byte'' or ``string[50]'' also define a new type. parser_e_abstract_and_sealed_conflict=03253_E_ABSTRACT and SEALED conflict % ABSTRACT and SEALED cannot be used together in one declaration parser_e_sealed_descendant=03254_E_Cannot create a descendant of the sealed class "$1" % Sealed means that class cannot be derived by another class. parser_e_sealed_class_cannot_have_abstract_methods=03255_E_SEALED class cannot have an ABSTRACT method % Sealed means that class cannot be derived. Therefore no one class is able to override an abstract method in a sealed class. parser_e_only_virtual_methods_final=03256_E_Only virtual methods can be final % You are declaring a method as final, when it is not declared to be % virtual. parser_e_final_can_no_be_overridden=03257_E_Final method cannot be overridden: "$1" % You are trying to \var{override} a virtual method of a parent class that does % not exist. parser_e_multiple_messages=03258_E_Only one message can be used per method. % It is not possible to associate multiple messages with a single method. parser_e_invalid_enumerator_identifier=03259_E_Invalid enumerator identifier: "$1" % Only "MoveNext" and "Current" enumerator identifiers are supported. parser_e_enumerator_identifier_required=03260_E_Enumerator identifier required % "MoveNext" or "Current" identifier must follow the \var{enumerator} modifier. parser_e_enumerator_movenext_is_not_valid=03261_E_Enumerator MoveNext pattern method is not valid. Method must be a function with the Boolean return type and no required arguments. % "MoveNext" enumerator pattern method must be a function with Boolean return type and no required arguments parser_e_enumerator_current_is_not_valid=03262_E_Enumerator Current pattern property is not valid. Property must have a getter. % "Current" enumerator pattern property must have a getter parser_e_only_one_enumerator_movenext=03263_E_Only one enumerator MoveNext method is allowed per class/object % Class or Object can have only one enumerator MoveNext declaration. parser_e_only_one_enumerator_current=03264_E_Only one enumerator Current property is allowed per class/object % Class or Object can have only one enumerator Current declaration. parser_e_for_in_loop_cannot_be_used_for_the_type=03265_E_For in loop cannot be used for the type "$1" % For in loop can be used not for all types. For example it cannot be used for the enumerations with jumps. parser_e_objc_requires_msgstr=03266_E_Objective-C messages require their Objective-C selector name to be specified using the "message" directive. % Objective-C messages require their Objective-C name (selector name) to be specified using the \var{message `someName:'} procedure directive. % While bindings to other languages automatically generate such names based on the identifier you use (by replacing % all underscores with colons), this is unsafe since nothing prevents an Objective-C method name to contain actual % colons. parser_e_objc_no_constructor_destructor=03267_E_Objective-C does not have formal constructors nor destructors. Use the alloc, initXXX and dealloc messages. % The Objective-C language does not have any constructors or destructors. While there are some messages with a similar % purpose (such as \var{init} and \var{dealloc}), these cannot be identified using automatic parsers and do not % guarantee anything like Pascal constructors/destructors (e.g., you have to take care of only calling ``designated'' % inherited ``constructors''). For these reasons, we have opted to follow the standard Objective-C patterns for % instance creation/destruction. parser_e_message_string_too_long=03268_E_Message name is too long (max. 255 characters) % Due to compiler implementation reasons, message names are currently limited to 255 characters. parser_e_objc_message_name_too_long=03269_E_Objective-C message symbol name for "$1" is too long % Due to compiler implementation reasons, mangled message names (i.e., the symbol names used in the assembler % code) are currently limited to 255 characters. parser_h_no_objc_parent=03270_H_Defining a new Objective-C root class. To derive from another root class (e.g., NSObject), specify it as the parent class. % If no parent class is specified for an Object Pascal class, then it automatically derives from TObject. % Objective-C classes however do not automatically derive from NSObject, because one can have multiple % root classes in Objective-C. For example, in the Cocoa framework both NSObject and NSProxy are root classes. % Therefore, you have to explicitly define a parent class (such as NSObject) if you want to derive your % Objective-C class from it. parser_e_no_objc_published=03271_E_Objective-C classes cannot have published sections. % In Object Pascal, ``published'' determines whether or not RTTI is generated. Since the Objective-C runtime always needs % RTTI for everything, this specified does not make sense for Objective-C classes. parser_f_need_objc=03272_F_This module requires an Objective-C mode switch to be compiled % This error indicates the use of Objective-C language features without an Objective-C mode switch % active. Enable one via the -M command line switch, or the {\$modeswitch x} directive. parser_e_must_use_override=03273_E_Inherited methods can only be overridden in Objective-C and Java, add "override" (inherited method defined in $1) parser_h_should_use_override=03274_H_Inherited methods can only be overridden in Objective-C and Java, add "override" (inherited method defined in $1). % It is not possible to \var{reintroduce} methods in Objective-C or Java like in Object Pascal. Methods with the same % name always map to the same virtual method entry. In order to make this clear in the source code, % the compiler always requires the \var{override} directive to be specified when implementing overriding % Objective-C or Java methods in Pascal. If the implementation is external, this rule is relaxed because Objective-C and Java % do not have any \var{override}-style keyword (since it's the default and only behaviour in these languages), % which makes it hard for automated header conversion tools to include it everywhere. % The type in which the inherited method is defined is explicitly mentioned, because this may either % be an objcclass or an objccategory in case of Objective-C. parser_e_objc_message_name_changed=03275_E_Message name "$1" in inherited class is different from message name "$2" in current class. % An overriding Objective-C method cannot have a different message name than an inherited method. The reason % is that these message names uniquely define the message to the Objective-C runtime, which means that % giving them a different message name breaks the ``override'' semantics. parser_e_unique_unsupported=03276_E_It is not yet possible to make unique copies of Objective-C or Java types % Duplicating an Objective-C or Java type using \var{type x = type y;} is not yet supported. You may be able to % obtain the desired effect using \var{type x = objcclass(y) end;} resp.{} \var{type x = class(y) end;} instead. parser_e_no_category_as_types=03277_E_Objective-C categories and Object Pascal class helpers cannot be used as types % It is not possible to declare a variable as an instance of an Objective-C % category or an Object Pascal class helper. A category/class helper adds % methods to the scope of an existing class, but does not define a type by % itself. An exception of this rule is when inheriting an Object Pascal class % helper from another class helper. parser_e_no_category_override=03278_E_Categories do not override, but replace methods. Use "reintroduce" instead. parser_e_must_use_reintroduce_objc=03279_E_Replaced methods can only be reintroduced in Objective-C, add "reintroduce" (replaced method defined in $1). parser_h_should_use_reintroduce_objc=03280_H_Replaced methods can only be reintroduced in Objective-C, add "reintroduce" (replaced method defined in $1). % A category replaces an existing method in an Objective-C class, rather than that it overrides it. % Calling an inherited method from an category method will call that method in % the extended class' parent, not in the extended class itself. The % replaced method in the original class is basically lost, and can no longer be % called or referred to. This behaviour corresponds somewhat more closely to % \var{reintroduce} than to \var{override} (although in case of \var{reintroduce} % in Object Pascal, hidden methods are still reachable via inherited). % The type in which the inherited method is defined is explicitly mentioned, because this may either % be an objcclass or an objccategory. parser_e_implements_getter_not_default_cc=03281_E_Getter for implements interface must use the target's default calling convention. % Interface getters are called via a helper in the run time library, and hence % have to use the default calling convention for the target (\var{register} on % i386 and x86\_64, \var{stdcall} on other architectures). parser_e_no_refcounted_typed_file=03282_E_Typed files cannot contain reference-counted types. % The data in a typed file cannot be of a reference counted type (such as % \var{ansistring} or a record containing a field that is reference counted). parser_e_operator_not_overloaded_2=03283_E_Operator is not overloaded: $2 "$1" % You are trying to use an overloaded operator when it is not overloaded for % this type. parser_e_operator_not_overloaded_3=03284_E_Operator is not overloaded: "$1" $2 "$3" % You are trying to use an overloaded operator when it is not overloaded for % this type. parser_e_more_array_elements_expected=03285_E_Expected another $1 array elements % When declaring a typed constant array, you provided to few elements to initialize the array parser_e_string_const_too_long=03286_E_String constant too long while ansistrings are disabled % Only when a piece of code is compiled with ansistrings enabled (\var{\{\$H+\}}), string constants % longer than 255 characters are allowed. parser_e_invalid_univ_para=03287_E_Type cannot be used as univ parameter because its size is unknown at compile time: "$1" % \var{univ} parameters are compatible with all values of the same size, but this % cannot be checked in case a parameter's size is unknown at compile time. parser_e_only_one_class_constructor_allowed=03288_E_Only one class constructor can be declared in class: "$1" % You are trying to declare more than one class constructor but only one class constructor can be declared. parser_e_only_one_class_destructor_allowed=03289_E_Only one class destructor can be declared in class: "$1" % You are trying to declare more than one class destructor but only one class destructor can be declared. parser_e_no_paras_for_class_constructor=03290_E_Class constructors cannot have parameters % You are declaring a class constructor with a parameter list. Class constructor methods % cannot have parameters. parser_e_no_paras_for_class_destructor=03291_E_Class destructors cannot have parameters % You are declaring a class destructor with a parameter list. Class destructor methods % cannot have parameters. parser_f_modeswitch_objc_required=03292_F_This construct requires the \{\$modeswitch objectivec1\} mode switch to be active % Objective-Pascal constructs are not supported when \{\$modeswitch ObjectiveC1\} % is not active. parser_e_widestring_to_ansi_compile_time=03293_E_Unicodechar/string constants cannot be converted to ansi/shortstring at compile-time % It is not possible to use unicodechar and unicodestring constants in % constant expressions that have to be converted into an ansistring or shortstring % at compile time, for example inside typed constants. The reason is that the % compiler cannot know what the actual ansi encoding will be at run time. parser_e_objc_enumerator_2_0=03294_E_For-in Objective-Pascal loops require \{\$modeswitch ObjectiveC2\} to be active % Objective-C ``fast enumeration'' support was added in Objective-C 2.0, and % hence the appropriate modeswitch has to be activated to expose this feature. % Note that Objective-C 2.0 programs require Mac OS X 10.5 or later. parser_e_objc_missing_enumeration_defs=03295_E_The compiler cannot find the NSFastEnumerationProtocol or NSFastEnumerationState type in the CocoaAll unit % Objective-C for-in loops (fast enumeration) require that the compiler can % find a unit called CocoaAll that contains definitions for the % NSFastEnumerationProtocol and NSFastEnumerationState types. If you get this % error, most likely the compiler is finding and loading an alternate CocoaAll % unit. parser_e_no_procvarnested_const=03296_E_Typed constants of the type 'procedure is nested' can only be initialized with NIL and global procedures/functions % A nested procedural variable consists of two components: the address of the % procedure/function to call (which is always known at compile time), and also % a parent frame pointer (which is never known at compile time) in case the % procedural variable contains a reference to a nested procedure/function. % Therefore such typed constants can only be initialized with global % functions/procedures since these do not require a parent frame pointer. parser_f_no_generic_inside_generic=03297_F_Declaration of generic class inside another generic class is not allowed % At the moment, scanner supports recording of only one token buffer at the time % (guarded by internal error 200511173 in tscannerfile.startrecordtokens). % Since generics are implemented by recording tokens, it is not possible to % have declaration of generic class inside another generic class. parser_e_forward_intf_declaration_must_be_resolved=03298_E_Forward declaration "$1" must be resolved before a class can conform to or implement it % An Objective-C protocol or Java Interface must be fully defined before classes can conform to it. % This error occurs in the following situation (example for Objective-C, but the same goes for Java interfaces): % \begin{verbatim} % Type MyProtocol = objcprotoocl; % ChildClass = Class(NSObject,MyProtocol) % ... % end; % \end{verbatim} % where \var{MyProtocol} is declared but not defined. parser_e_no_record_published=03299_E_Record types cannot have published sections % Published sections can be used only inside classes. parser_e_no_destructor_in_records=03300_E_Destructors are not allowed in records or helpers % Destructor declarations are not allowed in records or helpers. parser_e_class_methods_only_static_in_records=03301_E_Class methods must be static in records % Class methods declarations are not allowed in records without static modifier. % Records have no inheritance and therefore non static class methods have no sense for them. parser_e_no_parameterless_constructor_in_records=03302_E_Parameterless constructors are not allowed in records or record/type helpers % Constructor declarations with no arguments are not allowed in records or record/type helpers. parser_e_at_least_one_argument_must_be_of_type=03303_E_Either the result or at least one parameter must be of type "$1" % It is required that either the result of the routine or at least one of its parameters be of the specified type. % For example class operators either take an instance of the structured type in which they are defined, or they return one. parser_e_cant_use_type_parameters_here=03304_E_Type parameters may require initialization/finalization - cannot be used in variant records % Type parameters may be specialized with types which (e.g. \var{ansistring}) need initialization/finalization % code which is implicitly generated by the compiler. parser_e_externals_no_section=03305_E_Variables being declared as external cannot be in a custom section % A section directive is not valid for variables being declared as external. parser_e_section_no_locals=03306_E_Non-static and non-global variables cannot have a section directive % A variable placed in a custom section is always statically allocated so it must be either a static or global variable. parser_e_not_allowed_in_helper=03307_E_"$1" is not allowed in helper types % Some directives and specifiers like "virtual", "dynamic", "override" are not % allowed inside helper types in mode ObjFPC (they are ignored in mode Delphi), % because they have no meaning within helpers. Also "abstract" isn't allowed in % either mode. parser_e_no_class_constructor_in_helpers=03308_E_Class constructors are not allowed in helpers % Class constructor declarations are not allowed in helpers. parser_e_inherited_not_in_record=03309_E_The use of "inherited" is not allowed in a record % As records don't support inheritance the use of "inherited" is prohibited for % these as well as for record helpers (in mode "Delphi" only). parser_e_no_types_in_local_anonymous_records=03310_E_Type declarations are not allowed in local or anonymous records % Records with types must be defined globally. Types cannot be defined inside records which are defined in a % procedure or function or in anonymous records. parser_e_duplicate_implements_clause=03311_E_Duplicate implements clause for interface "$1" % A class may delegate an interface using the "implements" clause only to a single property. Delegating it multiple times % is a error. parser_e_mapping_no_implements=03312_E_Interface "$1" cannot be delegated by "$2", it already has method resolutions % Method resolution clause maps a method of an interface to a method of the current class. Therefore the current class % has to implement the interface directly. Delegation is not possible. parser_e_implements_no_mapping=03313_E_Interface "$1" cannot have method resolutions, "$2" already delegates it % Method resolution is only possible for interfaces that are implemented directly, not by delegation. parser_e_invalid_codepage=03314_E_Invalid codepage % When declaring a string with a given codepage, the range of valid codepages values is limited % to 0 to 65535. parser_e_final_only_const_var=03315_E_Only fields (var-sections) and constants can be final in object types % A final (class) field must be assigned a single value in the (class) constructor, and cannot % be overwritten afterwards. A final (typed) constant is read-only. parser_e_final_only_external=03316_E_Final fields are currently only supported for external classes % Support for final fields in non-external classes requires a full data flow % analysis implementation in FPC, which it currently still lacks. parser_e_no_typed_const=03317_E_Typed constants are not allowed here, only formal constants are % Java interfaces define a namespace in which formal constant can be defined, % but since they define no storage it is not possible to define typed constants % in them (those are more or less the same as initialised class fields). parser_e_java_no_inherited_constructor=03318_E_Constructors are not automatically inherited in the JVM; explicitly add a constructor that calls the inherited one if you need it % Java does not automatically add inherited constructors to child classes, so that they can be hidden. % For compatibility with external Java code, FPC does the same. If you require access to the same % constructors in a child class, define them in the child class and call the inherited one from % there. parser_d_internal_parser_string=03319_D_Parsing internally generated code: $1 % The compiler sometimes internally constructs Pascal code that is subsequently % injected into the program. These messages display such code, in order to help % with debugging errors in them. parser_e_feature_unsupported_for_vm=03320_E_This language feature is not supported on managed VM targets % Certain language features are not supported on targets that are managed virtual machines. parser_e_jvm_invalid_virtual_constructor_call=03321_E_Calling a virtual constructor for the current instance inside another constructor is not possible on the JVM target % The JVM does not natively support virtual constructor. Unforunately, we are not aware of a way to % emulate them in a way that makes it possible to support calling virtual constructors % for the current instance inside another constructor. parser_e_method_lower_visibility=03322_E_Overriding method "$1" cannot have a lower visibility ($2) than in parent class $3 ($4) % The JVM does not allow lowering the visibility of an overriding method. parser_e_nostackframe_without_assembler=03323_E_Procedure/Function declared with call option NOSTACKFRAME but without ASSEMBLER % nostackframe call modifier is supposed to be used in conjunction with assembler. parser_e_nostackframe_with_locals=03324_E_Procedure/Function declared with call option NOSTACKFRAME but local stack size is $1 % nostackframe call modifier used without assembler modifier % might still generate local stack needs. parser_e_cannot_generate_property_getter_setter=03325_E_Cannot generate property getter/setter $1 because its name clashes with existing identifier $2 % Automatically generated getters/setters cannot have the same name as existing % identifiers, because this may change the behaviour of existing code. parser_w_overriding_property_getter_setter=03326_W_Automatically generated property getter/setter $1 overrides the same-named getter/setter in class $2 % Automatically generated property getters/setters on the JVM platform are virtual methods, because % the JVM does not support non-virtual methods that can be changed in child classes. This means % that if a child class changes an inherited property definition, the behaviour of that property % can change compared to native targets since even if a variable is declared as the parent type, % by calling the virtual method the getter from the child will be used. This is different from % the behaviour on native targets or when not activating automatically generated setters/getters, % because in that case only the declared type of a variable influences the property behaviour. parser_w_case_difference_auto_property_getter_setter_prefix=03327_W_Case mismatch between declared property getter/setter $1 and automatically constructed name $2, not changing declared name % If a property's specified getter/setter already corresponded to the naming convention specified % by the automatic getter/setter generation setting except in terms of upper/lowercase, the % compiler will print a warning because it cannot necessarily change that other declaration itself % not can it add one using the correct case (it could conflict with the original declaration). % Manually correct the case of the getter/setter to conform to the desired coding rules. % \var{TChild} overrides parser_e_no_consts_in_local_anonymous_records=03328_E_Constants declarations are not allowed in local or anonymous records % Records with constants must be defined globally. Constants cannot be defined inside records which are defined in a % procedure or function or in anonymous records. parser_e_no_methods_in_local_anonymous_records=03329_E_Method declarations are not allowed in local or anonymous records % Records with methods must be defined globally. Methods cannot be defined inside records which are defined in a % procedure or function or in anonymous records. parser_e_no_properties_in_local_anonymous_records=03330_E_Property declarations are not allowed in local or anonymous records % Records with properties must be defined globally. Properties cannot be defined inside records which are defined in a % procedure or function or in anonymous records. parser_e_no_class_in_local_anonymous_records=03331_E_Class member declarations are not allowed in local or anonymous records % Records with class members must be defined globally. Class members cannot be defined inside records which are defined in a % procedure or function or in anonymous records. parser_e_not_allowed_in_record=03332_E_Visibility section "$1" not allowed in records % The visibility sections \var(protected) and \var(strict protected) are only % useful together with inheritance. Since records do not support that they are % forbidden. parser_e_dir_not_allowed=03333_E_Directive "$1" not allowed here % This directive is not allowed in the given context. E.g. "static" % is not allowed for instance methods or class operators. parser_e_no_assembler_in_generic=03334_E_Assembler blocks not allowed inside generics % The use of assembler blocks/routines is not allowed inside generics. parser_e_property_only_sgr=03335_E_Properties can be only static, global or inside structured types % Properties cannot be declared local, only global, using the static % directive or inside structured types. parser_e_overloaded_have_same_mangled_name=03336_E_Overloaded routines have the same mangled name % Some platforms, such as the JVM platform, encode the parameters in the routine name in % a prescribed way, and this encoding may map different Pascal types to the same encoded % (a.k.a.\ ``mangled'') name. This error can only be solved by removing or changing the % conflicting definitions' parameter declarations or routine names. parser_e_default_value_val_const=03337_E_Default values can only be specified for value, const and constref parameters % A default parameter value allows you to not specify a value for this parameter % when calling the routine, and the compiler will instead pass the specified % default (constant) value. As a result, default values can only be specified % for parameters that can accept constant values. parser_w_ptr_type_ignored=03338_W_Pointer type "$1" ignored % The specified pointer type modifier is ignored, because it is not supported on % the current platform. This happens, for example, when a far pointer is % declared on a non-x86 platform. parser_e_global_generic_references_static=03339_E_Global Generic template references static symtable % A generic declared in the interface section of a unit must not reference symbols that belong % solely to the implementation section of that unit. parser_u_already_compiled=03340_UL_Unit $1 has been already compiled meanwhile. % This tells you that the recursive reading of the uses clauses triggered already % a compilation of the current unit, so the current compilation can be aborted. % % % % \end{description} % # Type Checking # # 04123 is the last used one # % \section{Type checking errors} % This section lists all errors that can occur when type checking is % performed. % \begin{description} type_e_mismatch=04000_E_טיפוס נתונים לא חופף % This can happen in many cases: % \begin{itemize} % \item The variable you're assigning to is of a different type than the % expression in the assignment. % \item You are calling a function or procedure with parameters that are % incompatible with the parameters in the function or procedure definition. % \end{itemize} type_e_incompatible_types=04001_E_טיפוס נתונים לא תואם: נעשה שימוש ב "$1" מצפה ל"$2" % There is no conversion possible between the two types % Another possiblity is that they are declared in different % declarations: % \begin{verbatim} % Var % A1 : Array[1..10] Of Integer; % A2 : Array[1..10] Of Integer; % % Begin % A1:=A2; { This statement gives also this error, it % is due the strict type checking of pascal } % End. % \end{verbatim} type_e_not_equal_types=04002_E_אי התאמה בין טיפוסי הנתונים "$1" ו "$2" % The types are not equal type_e_type_id_expected=04003_E_מצפה לטיפוס נתונים % The identifier is not a type, or you forgot to supply a type identifier. type_e_variable_id_expected=04004_E_מצפה למזהה של משתנה % This happens when you pass a constant to a routine (such as \var{Inc} var or \var{Dec}) % when it expects a variable. You can only pass variables as arguments to these functions. type_e_integer_expr_expected=04005_E_מצפה למספר שלם, אך התקבל "$1" % The compiler expects an expression of type integer, but gets a different % type. type_e_boolean_expr_expected=04006_E_מצפה לביטוי בוליאני, אך התקבל "$1" % The expression must be a boolean type, it should be return true or % false. type_e_ordinal_expr_expected=04007_E_מצפה לטיפוס סודר % The expression must be of ordinal type, i.e., maximum a \var{Longint}. % This happens, for instance, when you specify a second argument % to \var{Inc} or \var{Dec} that doesn't evaluate to an ordinal value. type_e_pointer_type_expected=04008_E_מצפה למצביע, אך התקבל "$1" % The variable or expression isn't of the type \var{pointer}. This % happens when you pass a variable that isn't a pointer to \var{New} % or \var{Dispose}. type_e_class_type_expected=04009_E_מצפה למחלקה, אך התקבל "$1" % The variable of expression isn't of the type \var{class}. This happens % typically when % \begin{enumerate} % \item The parent class in a class declaration isn't a class. % \item An exception handler (\var{On}) contains a type identifier that % isn't a class. % \end{enumerate} type_e_cant_eval_constant_expr=04011_E_לא ניתן לנתח את הביטוי הקבוע % This error can occur when the bounds of an array you declared does % not evaluate to ordinal constants type_e_set_element_are_not_comp=04012_E_האלמנטים של הקבוצה אינם תואמים % You are trying to make an operation on two sets, when the set element types % are not the same. The base type of a set must be the same when taking the % union type_e_set_operation_unknown=04013_E_הפעולה אינה בשימוש עם קבוצות % several binary operations are not defined for sets % like div mod ** (also >= <= for now) type_w_convert_real_2_comp=04014_W_המרה אוטומטית של טיפוס עשרוני ל COMP אשר הוא מספר שלם % An implicit type conversion from a real type to a \var{comp} is % encountered. Since \var{comp} is a 64 bit integer type, this may indicate % an error. type_h_use_div_for_int=04015_H_השתמש בDIV במקום על מנת לקבל תוצאה של מספר שלם % When hints are on, then an integer division with the '/' operator will % procuce this message, because the result will then be of type real type_e_strict_var_string_violation=04016_E_טיפוס המחרוזת אינם תואם בגלל השימוש במתג $V+ % When compiling in \var{\{\$V+\}} mode, the string you pass as a parameter % should be of the exact same type as the declared parameter of the procedure. type_e_succ_and_pred_enums_with_assign_not_possible=04017_E_לא ניתן להציב ערכים למניות תוך שימוש בsucc או pred % When you declared an enumeration type which has assignments in it, as in C, % like in the following: % \begin{verbatim} % Tenum = (a,b,e:=5); % \end{verbatim} % you cannot use the \var{Succ} or \var{Pred} functions on them. type_e_cant_read_write_type=04018_E_לא ניתן לקרוא או לכתוב משתנים מהסוג הנוכחי % You are trying to \var{read} or \var{write} a variable from or to a % file of type text, which doesn't support that. Only integer types, % reals, pchars and strings can be read from/written to a text file. % Booleans can only be written to text files. type_e_no_readln_writeln_for_typed_file=04019_E_לא ניתן להשתמש בreadln וwriteln על טיפוס נתונים מסוג file % \var{readln} and \var{writeln} are only allowed for text files. type_e_no_read_write_for_untyped_file=04020_E_לא ניתן לקרוא או לכתוב טיפוס לא מוגר של קבצים % \var{read} and \var{write} are only allowed for text or typed files. type_e_typeconflict_in_set=04021_E_התנגשות של טיפוס נתונים בתוך איברים של קבוצה % There is at least one set element which is of the wrong type, i.e. not of % the set type. type_w_maybe_wrong_hi_lo=04022_W_lo/hi(dword/qword) מחזיר את הערך העליון/תחתון של word/dword % \fpc supports an overloaded version of \var{lo/hi} for \var{longint/dword/int64/qword} % which returns the lower/upper word/dword of the argument. TP always uses % a 16 bit \var{lo/hi} which returns always bits 0..7 for \var{lo} and the % bits 8..15 for \var{hi}. If you want the TP behavior you have % to type cast the argument to \var{word/integer} type_e_integer_or_real_expr_expected=04023_E_מצפה לביטוי של מספר שלם או מספר ממשי % The first argument to \var{str} must a real or integer type. type_e_wrong_type_in_array_constructor=04024_E_שימוש שגוי בטיפוס "$1" בתוך יוצר המערך % You are trying to use a type in an array constructor which is not % allowed. type_e_wrong_parameter_type=04025_E_טיפוס לא מתאים לארגומנט מספר $1: התקבל "$2", מצפה ל"$3" % You are trying to pass an invalid type for the specified parameter. type_e_no_method_and_procedure_not_compatible=04026_E_המשתנה של המתודה והשגרה אינם תואמים % You can't assign a method to a procedure variable or a procedure to a % method pointer. type_e_wrong_math_argument=04027_E_ביטוי קבוע לא חוקי הוזן לפונקציה מתמטית פנימית % The constant argument passed to a ln or sqrt function is out of % the definition range of these functions. type_e_no_addr_of_constant=04028_E_לא ניתן לקבל את הכתובת של הקבוע % It is not possible to get the address of a constant expression, because they % aren't stored in memory. You can try making it a typed constant. This error % can also be displayed if you try to pass a property to a var parameter. type_e_argument_cant_be_assigned=04029_E_לא ניתן להשים את הארגומנט % Only expressions which can be on the left side of an % assignment can be passed as call by reference argument % Remark: Properties can be only % used on the left side of an assignment, but they cannot be used as arguments type_e_cannot_local_proc_to_procvar=04030_E_לא ניתן לשייך פונקציה/שיגרה מקומית למשתנה מסוג שיגרה % It's not allowed to assign a local procedure/function to a % procedure variable, because the calling of local procedure/function is % different. You can only assign local procedure/function to a void pointer. type_e_no_assign_to_addr=04031_E_לא ניתן לשייך ערך לכתובת % It is not allowed to assign a value to an address of a variable,constant, % procedure or function. You can try compiling with -So if the identifier % is a procedure variable. type_e_no_assign_to_const=04032_E_לא ניתן לשייך ערך למשתנה קבוע % It's not allowed to assign a value to a variable which is declared % as a const. This is normally a parameter declared as const, to allow % changing the value make the parameter as a value parameter or a var. type_e_array_required=04033_E_נדרש משתנה מסוג מערך % If you are accessing a variable using an index '[]' then % the type must be an array. In FPC mode also a pointer is allowed. type_e_interface_type_expected=04034_E_מצפה לטיפוס מסוג ממשק, אבל התקבל "$1" % The compiler expected to encounter an interface type name, but got something else. % The following code would provoke this error: % \begin{verbatim} % Type % TMyStream = Class(TStream,Integer) % \end{verbatim} type_h_mixed_signed_unsigned=04035_H_Mixing signed expressions and longwords gives a 64bit result % If you divide (or calculate the modulus of) a signed expression by a longword (or vice versa), % or if you have overflow and/or range checking turned on and use an arithmetic % expression (+, -, *, div, mod) in which both signed numbers and longwords appear, % then everything has to be evaluated in 64-bit arithmetic which is slower than normal % 32-bit arithmetic. You can avoid this by typecasting one operand so it % matches the result type of the other one. type_w_mixed_signed_unsigned2=04036_W_ערבוב ביטויי סימנים ומספרים שלמים גבוהים עלול לגרום לשגיאת טווח מספרים % If you use a binary operator (and, or, xor) and one of % the operands is a longword while the other one is a signed expression, then, % if range checking is turned on, you may get a range check error because in % such a case both operands are converted to longword before the operation is % carried out. You can avoid this by typecasting one operand so it % matches the result type of the other one. type_e_typecast_wrong_size_for_assignment=04037_E_ישנו הבדל בגודל בהצבה של typecast ($1-> $2) % Type casting to a type with a different size is not allowed when the variable is % used for assigning. type_e_array_index_enums_with_assign_not_possible=04038_E_מניות עם תוכן של הצבה אינם יכולים לשמש בתור אינדקס למערך % When you declared an enumeration type which has assignments in it, as in C, % like in the following: % \begin{verbatim} % Tenum = (a,b,e:=5); % \end{verbatim} % you cannot use it as index of an array. type_e_classes_not_related=04039_E_אין קירבה בין טיפוסי מחלקות או אובייקטים של "$1" ו "$2" % There is a typecast from one class or object to another while the class/object % are not related. This will probably lead to errors type_w_classes_not_related=04040_W_אין קירבה בין טיפוסי המחלקות של "$1" ו "$2" % There is a typecast from one class or object to another while the class/object % are not related. This will probably lead to errors type_e_class_or_interface_type_expected=04041_E_מצפה לטיפוסי מחלקות או ממשקים, אבל "$1" התקבל % The compiler expected a class or interface name, but got another type or identifier. type_e_type_is_not_completly_defined=04042_E_הטיפוס "$1" לא הוגדר במלואו % This error occurs when a type is not complete: i.e. a pointer type which points to % an undefined type. type_w_string_too_long=04043_W_התוכן של המחרוזת מכיל יותר תווים ממה שניתן להכיל באורך של מחרוזת קצרה % The size of the constant string, which is assigned to a shortstring, % is longer than the maximum size of the shortstring type_w_comparison_always_false=04044_W_Comparison might be always false due to range of constant and expression % There is a comparison between a constant and an expression where the constant is out of the % valid range of values of the expression. Because of type promotion, the statement will always evaluate to % false. Explicitly typecast the constant or the expression to the correct range to avoid this warning % if you think the code is correct. type_w_comparison_always_true=04045_W_Comparison might be always true due to range of constant and expression % There is a comparison between a constant and an expression where the constant is out of the % valid range of values of the expression. Because of type promotion, the statement will always evaluate to % true. Explicitly typecast the constant or the expression to the correct range to avoid this warning % if you think the code is correct. type_w_instance_with_abstract=04046_W_מאתחל את המחלקה "$1" עם מתודות לא ממומשות % An instance of a class is created which contains non-implemented abstract % methods. This will probably lead to a runtime error 211 in the code if that % routine is ever called. All abstract methods should be overridden. type_h_in_range_check=04047_H_הערך השמאלי של האופרנד IN צריך להיות בגודל של בית % The left operand of the \var{in} operator is not an ordinal or enumeration which fits % within 8-bits, this may lead to range check errors. The \var{in} operator % currently only supports a left operand which fits within a byte. In the case of % enumerations, the size of an element of an enumeration can be controlled with % the \var{\{\$PACKENUM\}} or \var{\{\$Zn\}} switches. type_w_smaller_possible_range_check=04048_W_גודל הטיפוס אינו מתאים, ישנה אפשרות לאיבוד מידע או שגיאה בבדיקת הטווח % There is an assignment to a smaller type than the source type. This means that % this may cause a range-check error, or may lead to possible loss of data. type_h_smaller_possible_range_check=04049_H_גודל הטיפוס אינו מתאים, ישנה אפשרות לאיבוד מידע או שגיאה בבדיקת הטווח % There is an assignment to a smaller type than the source type. This means that % this may cause a range-check error, or may lead to possible loss of data. type_e_cant_take_address_of_abstract_method=04050_E_לא ניתן לספק את כתובת המתודה המוגדרת כ abstract % An abstract method has no body, so the address of an abstract method can't be taken. type_e_assignment_not_allowed=04051_E_לא ניתן לשייך את הערך לפרמטרים רשמיים ומערכים פתוחים % You are trying to assign a value to a formal (untyped var, const or out) % parameter, or to an open array. type_e_constant_expr_expected=04052_E_מצפה לביטוי קבוע % The compiler expects an constant expression, but gets a variable expression. type_e_operator_not_supported_for_types=04053_E_הפעולה "$1" אינה נתמכת לטיפוסים "$1" ו "$3" % The operation is not allowed for the supplied types type_e_illegal_type_conversion=04054_E_המרה לא חוקית של הטיפוס של "$1" ל "$2" % When doing a type-cast, you must take care that the sizes of the variable and % the destination type are the same. type_h_pointer_to_longint_conv_not_portable=04055_H_ההמרה בין מספר למצביע אינה אפשרית בכל המערכות % If you typecast a pointer to a longint (or vice-versa), this code will not compile % on a machine using 64-bit for pointer storage. type_w_pointer_to_longint_conv_not_portable=04056_W_ההמרה בין מספר למצביע אינה אפשרית בכל המערכות % If you typecast a pointer to a ordinal type of a different size (or vice-versa), this can % cause problems. This is a warning to help finding the 32bit specific code where cardinal/longint is used % to typecast pointers to ordinals. A solution is to use the ptrint/ptruint types instead. type_e_cant_choose_overload_function=04057_E_לא ניתן להחליט באיזו פונקצית עמוסת יתר להשתמש % You're calling overloaded functions with a parameter that doesn't correspond % to any of the declared function parameter lists. e.g. when you have declared % a function with parameters \var{word} and \var{longint}, and then you call % it with a parameter which is of type \var{integer}. type_e_illegal_count_var=04058_E_משתנה ספירה לא חוקי % The type of a \var{for} loop variable must be an ordinal type. % Loop variables cannot be reals or strings. type_w_double_c_varargs=04059_W_ממיר את הטיפוס real לטיפוס double למשתנה C. הוסף typecast ספציפי למנוע את המצב. % In C, constant real values are double by default. For this reason, if you % pass a constant real value to a variable argument part of a C function, FPC % by default converts this constant to double as well. If you want to prevent % this from happening, add an explicit typecast around the constant. type_e_class_or_cominterface_type_expected=04060_E_מצפה לטיפוס מחלקה או ממשק COM, אבל התקבל "$1" % Some operators like the AS operator are only appliable to classes or COM interfaces. type_e_no_const_packed_array=04061_E_אין תמיכה במערך קבוע דחוס % You cannot declare a (bit)packed array as a typed constant. type_e_got_expected_packed_array=04062_E_חוסר תאימות לטיפוס הנתונים של ארגומנט $1. התקבל: "$2" מצא ל "(bit)packed array" % The compiler expects a (bit)packed array as the specified parameter type_e_got_expected_unpacked_array=04063_E_חוסר תאימות טיפוס הנתונים של ארגומנט $1. התקבל "$2" מצפה ל "(not packed) Array" % The compiler expects a regular (i.e., not packed) array as the specified parameter type_e_no_packed_inittable=04064_E_אלמטים של מערך דחוס אינם יכולים להיות מטיפוס נתונים אשר דורש אתחול % Support for packed arrays of types that need initialization (such as ansistrings, or records which contain ansistrings) is not yet implemented. type_e_no_const_packed_record=04065_E_אין תמיכה לרשומות ואבייקטים קבועים ודחוסים % You cannot declare a (bit)packed array as a typed constant at this time. type_w_untyped_arithmetic_unportable=04066_W_חישוב "$1" על טיפוס לא מוגדר של מצביע אינו נתמך במצב {$T+}, אך ניתן להשתמש בtypecast % Addition/subtraction from untyped pointer may work differently in \var{\{\$T+\}}, use typecast to typed pointer type_e_cant_take_address_of_local_subroutine=04076_E_לא ניתן לקחת את כתובת השיגרה המסומנת כמקומית % The address of a subroutine marked as local can't be taken. type_e_cant_export_local=04077_E_לא ניתן לייצא שיגרה המסומנת כמקומית בתוך יחידה % A subroutine marked as local can't be export from a unit. type_e_not_automatable=04078_E_הטיפוס אינו אוטומט: "$1" % Only byte, integer, longint, smallint, currency, single, double, ansistring, % widestring, tdatetime, variant, olevariant, wordbool and all interfaces are automatable. type_h_convert_add_operands_to_prevent_overflow=04079_H_המרת האופרנד ל"$1" לפני פעולת החיבור, יכול למנוע שגיאות גלישה. % Adding two types can cause overflow errors. Since you are converting the result to a larger type, you % could prevent such errors by converting the operands to this type before doing the addition. type_h_convert_sub_operands_to_prevent_overflow=04080_H_המרת האופרנד ל"$1" לפני פעולת החיבור יכולה למנוע שגיאות גלישה. % Subtracting two types can cause overflow errors. Since you are converting the result to a larger type, you % could prevent such errors by converting the operands to this type before doing the subtraction. type_h_convert_mul_operands_to_prevent_overflow=04081_H_המרת האופרנד "$1" לפני פעולת הכפל יכולה למנוע שגיאות גלישה. % Multiplying two types can cause overflow errors. Since you are converting the result to a larger type, you % could prevent such errors by converting the operands to this type before doing the multiplication. type_w_pointer_to_signed=04082_W_המרת מצביעים למספרים שלמים עם סימן עלולה לגרום לשגיאות בתוצאות השוואה ובטווחים. יש להשתמש במקום זאת בטיפוס ללא סימן. % The virtual address space on 32-bit machines runs from \$00000000 to \$ffffffff. Many operating systems allow you to % allocate memory above \$80000000, for example both Windows and Linux allow pointers in the range \$0000000 to \$bfffffff. % If you convert pointers to signed types, this can cause overflow and range check errors, but also \$80000000 < \$7fffffff. % This can cause random errors in code like "if p>q". % \end{description} # # Symtable # # 05060 is the last used one # % \section{Symbol handling} % This section lists all the messages that concern the handling of symbols. % This means all things that have to do with procedure and variable names. % \begin{description} type_e_interface_has_no_guid=04083_E_Interface type $1 has no valid GUID % When applying the as-operator to an interface or class, the desired interface (i.e. the right operand of the % as-operator) must have a valid GUID. type_e_invalid_objc_selector_name=04084_E_Invalid selector name "$1" % An Objective-C selector cannot be empty, must be a valid identifier or a single colon, % and if it contains at least one colon it must also end in one. type_e_expected_objc_method_but_got=04085_E_Expected Objective-C method, but got $1 % A selector can only be created for Objective-C methods, not for any other kind % of procedure/function/method. type_e_expected_objc_method=04086_E_Expected Objective-C method or constant method name % A selector can only be created for Objective-C methods, either by specifying % the name using a string constant, or by using an Objective-C method identifier % that is visible in the current scope. type_e_no_type_info=04087_E_No type info available for this type % Type information is not generated for some types, such as enumerations with gaps % in their value range (this includes enumerations whose lower bound is different % from zero). type_e_ordinal_or_string_expr_expected=04088_E_Ordinal or string expression expected % The expression must be an ordinal or string type. type_e_string_expr_expected=04089_E_String expression expected % The expression must be a string type. type_w_zero_to_nil=04090_W_Converting 0 to NIL % Use NIL rather than 0 when initialising a pointer. type_e_protocol_type_expected=04091_E_Objective-C protocol type expected, but got "$1" % The compiler expected a protocol type name, but found something else. type_e_objc_type_unsupported=04092_E_The type "$1" is not supported for interaction with the Objective-C and the blocks runtime. % Objective-C and Blocks make extensive use of run time type information (RTTI). This format % is defined by the maintainers of the run time and can therefore not be adapted % to all possible Object Pascal types. In particular, types that depend on % reference counting by the compiler (such as ansistrings and certain kinds of % interfaces) cannot be used as fields of Objective-C classes, cannot be % directly passed to Objective-C methods or Blocks, and cannot be encoded using \var{objc\_encode}. type_e_class_or_objcclass_type_expected=04093_E_Class or objcclass type expected, but got "$1" % It is only possible to create class reference types of \var{class} and \var{objcclass} type_e_objcclass_type_expected=04094_E_Objcclass type expected % The compiler expected an \var{objcclass} type type_w_procvar_univ_conflicting_para=04095_W_Coerced univ parameter type in procedural variable may cause crash or memory corruption: $1 to $2 % \var{univ} parameters are implicitly compatible with all types of the same size, % also in procedural variable definitions. That means that the following code is % legal, because \var{single} and \var{longint} have the same size: % \begin{verbatim} % {$mode macpas} % Type % TIntProc = procedure (l: univ longint); % % procedure test(s: single); % begin % writeln(s); % end; % % var % p: TIntProc; % begin % p:=test; % p(4); % end. % \end{verbatim} % This code may however crash on platforms that pass integers in registers and % floating point values on the stack, because then the stack will be unbalanced. % Note that this warning will not flag all potentially dangerous situations. % when \var{test} returns. type_e_generics_cannot_reference_itself=04096_E_Type parameters of specializations of generics cannot reference the currently specialized type % Recursive specializations of generics like \var{Type MyType = specialize MyGeneric;} are not possible. type_e_type_parameters_are_not_allowed_here=04097_E_Type parameters are not allowed on non-generic class/record/object procedure or function % Type parameters are only allowed for methods of generic classes, records or objects type_e_generic_declaration_does_not_match=04098_E_Generic declaration of "$1" differs from previous declaration % Generic declaration does not match the previous declaration type_e_helper_type_expected=04099_E_Helper type expected % The compiler expected a \var{class helper} type. type_e_record_type_expected=04100_E_Record type expected % The compiler expected a \var{record} type. type_e_class_helper_must_extend_subclass=04101_E_Derived class helper must extend a subclass of "$1" or the class itself % If a class helper inherits from another class helper the extended class must % extend either the same class as the parent class helper or a subclass of it type_e_record_helper_must_extend_same_record=04102_E_Derived record or type helper must extend "$1" % If a record helper inherits from another record helper it must extend the same % record that the parent record helper extended. type_e_procedures_return_no_value=04103_E_Invalid assignment, procedures return no value % This error occurs when one tries to assign the result of a procedure or destructor call. % A procedure or destructor returns no value so this is not % possible. type_w_implicit_string_cast=04104_W_Implicit string type conversion from "$1" to "$2" % An implicit type conversion from an ansi string type to an unicode string type is % encountered. To avoid this warning perform an explicit type conversion. type_w_implicit_string_cast_loss=04105_W_Implicit string type conversion with potential data loss from "$1" to "$2" % An implicit type conversion from an unicode string type to an ansi string type is % encountered. This conversion can lose data since not all unicode characters may be represented in the codepage of % destination string type. type_w_explicit_string_cast=04106_-W_Explicit string typecast from "$1" to "$2" % An explicit typecast from an ansi string type to an unicode string type is % encountered. This warning is off by default. You can turn it on to see all suspicious string conversions. type_w_explicit_string_cast_loss=04107_-W_Explicit string typecast with potential data loss from "$1" to "$2" % An explicit typecast from an unicode string type to an ansi string type is % encountered. This conversion can lose data since not all unicode characters may be represented in the codepage of % destination string type. This warning is off by default. You can turn it on to see all the places with lossy string % conversions. type_w_unicode_data_loss=04108_W_Unicode constant cast with potential data loss % Conversion from a WideChar to AnsiChar can lose data since now all unicode characters may be represented in the current % system codepage % You can nest function definitions only 31 levels deep. type_e_range_check_error_bounds=04109_E_range check error while evaluating constants ($1 must be between $2 and $3) type_w_range_check_error_bounds=04110_W_range check error while evaluating constants ($1 must be between $2 and $3) % The constants are outside their allowed range. type_e_type_not_allowed_for_default=04111_E_This type is not supported for the Default() intrinsic % Some types like for example Text and File Of X are not supported by the Default intrinsic. type_e_java_class_method_not_static_virtual=04112_E_JVM virtual class methods cannot be static % Virtual class methods cannot be static when targeting the JVM platform, because % the self pointer is required for correct dispatching. type_e_invalid_final_assignment=04113_E_Final (class) fields can only be assigned in their class' (class) constructor % It is only possible to assign a value to a final (class) field inside a (class) constructor of its owning class. type_e_no_managed_formal_assign_typecast=04114_E_It is not possible to typecast untyped parameters on managed platforms, simply assign a value to them instead. % On managed platforms, untyped parameters are translated by the compiler into % the equivalent of \var{var x: BaseClassType}. Non-class-based types passed to % such parameters are automatically wrapped (or boxed) in a class, and after the % call the potentially modified value is assigned back to the original variable. % On the caller side, changing untyped var/out parameters happens by simply assigning % values to them (either class-based or primitive ones). On the caller side, % they will be extracted and if their type does not match the original variable's, % an exception will be raised. type_e_no_managed_assign_generic_typecast=04115_E_The assignment side of an expression cannot be typecasted to a supertype on managed platforms % Managed platforms guarantee type safety at the bytecode level. This means that the virtual machine must be able % to statically determine that no type-unsafe assignments or operations occur. By assigning a parent class type to a % variable of a child type by typecasting the assignment side to the parent class type, the type safety would no % longer be guaranteed and the generated code would fail verification at run time time. type_w_interface_lower_visibility=04116_-W_The interface method "$1" raises the visibility of "$2" to public when accessed via an interface instance type_e_interface_lower_visibility=04117_E_The interface method "$1" has a higher visibility (public) than "$2" % All methods in an interface have always public visibility. That means that if % an interface method is implemented using a (strict) protected or private method, % this method is actually publicly accessible via the interface. On the JVM % target this situation results in an error because the JVM rejects such % attempts to circumvent the visibility rules. On other targets this is a % warning that is disabled by default because such situations are common % practice, but it can be enabled in case you are concerned with keeping your % code compilable for the JVM target. type_e_typeof_requires_vmt=04118_E_TYPEOF can only be used on object types with VMT % Typeof() intrinsic returns pointer to VMT of its argument. It cannot be used on object types that do not have VMT. type_e_invalid_default_value=04119_E_It is not possible to define a default value for a parameter of type "$1" % Parameters declared as structured types, such as files, variants, non-dynamic % arrays and TP-style objects, cannot have a default value. type_e_type_not_allowed_for_type_helper=04120_E_Type "$1" cannot be extended by a type helper % Types like procedural variables cannot be extended by type helpers type_e_procedure_must_be_far=04121_E_Procedure or function must be far in order to allow taking its address: "$1" % In certain i8086 memory models (medium, large and huge), procedures and functions % have to be declared 'far' in order to allow their address to be taken. type_w_instance_abstract_class=04122_W_Creating an instance of abstract class "$1" % The specified class is declared as \var{abstract} and thus no instance of this class % should be created. This is merely a warning for Delphi compatibility. type_e_function_reference_kind=04123_E_Subroutine references cannot be declared as "of object" or "is nested", they can always refer to any kind of subroutine % Subroutine references can refer to any kind of subroutine and hence do not % require specialisation for methods or nested subroutines. type_e_anonymous_function_unsupported=04999_E_Function references are not yet supported, only blocks (add "cdecl;" at the end) % Remove this error message once Delphi-style anonymous are implemented. It has % number 4999 so as not to result in a gap in the error message numbering once % it's removed. % \end{description} # # Symtable # # 05095 is the last used one # % \section{Symbol handling} % This section lists all the messages that concern the handling of symbols. % This means all things that have to do with procedure and variable names. % \begin{description} sym_e_id_not_found=05000_E_המזהה לא נמצא "$1" % The compiler doesn't know this symbol. Usually happens when you misspel % the name of a variable or procedure, or when you forgot to declare a % variable. sym_f_internal_error_in_symtablestack=05001_F_שגיאה פנימית בSymTableStack() % An internal error occurred in the compiler; If you encounter such an error, % please contact the developers and try to provide an exact description of % the circumstances in which the error occurs. sym_e_duplicate_id=05002_E_מזהה כפול "$1" % The identifier was already declared in the current scope. sym_h_duplicate_id_where=05003_H_המזהה כבר מוגדר ב$1 בשורה $2 % The identifier was already declared in a previous scope. sym_e_unknown_id=05004_E_מזהה לא מוכר "$1" % The identifier encountered has not been declared, or is used outside the % scope where it is defined. sym_e_forward_not_resolved=05005_E_הגדרת Forward לא ממומשת % This can happen in two cases: % \begin{itemize} % \item This happens when you declare a function (in the \var{interface} part, or % with a \var{forward} directive, but do not implement it. % \item You reference a type which isn't declared in the current \var{type} % block. % \end{itemize} sym_e_error_in_type_def=05007_E_שגיאה בהגדרת טיפוס % There is an error in your definition of a new array type: % \item One of the range delimiters in an array declaration is erroneous. % For example, \var{Array [1..1.25]} will trigger this error. sym_e_forward_type_not_resolved=05009_E_הגדרת הטיפוס לא הושלה "$1" % A symbol was forward defined, but no declaration was encountered. sym_e_only_static_in_static=05010_E_רק משתנים סטטיים יכולים להיות בשימוש עם מתודות סטטיות או מחוץ למטודות % A static method of an object can only access static variables. sym_e_type_must_be_rec_or_object_or_class=05012_E_Record or object or class type expected % The variable or expression isn't of the type \var{record} or \var{object} or \var{class}. sym_e_no_instance_of_abstract_object=05013_E_אדגם של מחלקות או אובייקטים עם מתודות abstract אינם מורשים % You are trying to generate an instance of a class which has an abstract % method that wasn't overridden. sym_w_label_not_defined=05014_W_התווית "$1" אינה מוגדרת % A label was declared, but not defined. sym_e_label_used_and_not_defined=05015_E_התווית "$1" בשימוש, אבל לא מגדרת % A label was declared and used, but not defined. sym_e_ill_label_decl=05016_E_הגדרת תווית לא חוקית % This error should never happen; it occurs if a label is defined outside a % procedure or function. sym_e_goto_and_label_not_supported=05017_E_GOTO ו LABEL אינם נתמכים (השתמש במתג -Sg) % You must compile a program which has \var{label}s and \var{goto} statements % with the \var{-Sg} switch. By default, \var{label} and \var{goto} aren't % supported. sym_e_label_not_found=05018_E_התווית לא נמצאה % A \var{goto label} was encountered, but the label isn't declared. sym_e_id_is_no_label_id=05019_E_המזהה אינו תווית % The identifier specified after the \var{goto} isn't of type label. sym_e_label_already_defined=05020_E_התווית כבר הוגדרה % You are defining a label twice. You can define a label only once. sym_e_ill_type_decl_set=05021_E_הגדרת טיפוס סידרה לא חוקית % The declaration of a set contains an invalid type definition. sym_e_class_forward_not_resolved=05022_E_הגדרה מקדימה של מחלקה "$1" לא ממומשת % You declared a class, but you did not implement it. sym_n_unit_not_used=05023_H_היחידה "$1" אינה בשימוש ב $2 % The unit referenced in the \var{uses} clause is not used. sym_h_para_identifier_not_used=05024_H_הפרמטר "$1" אינו בשימוש % The identifier was declared (locally or globally) but % was not used (locally or globally). sym_n_local_identifier_not_used=05025_N_המשתנה המקומי "$1" אינו בשימוש % You have declared, but not used a variable in a procedure or function % implementation. sym_h_para_identifier_only_set=05026_H_הערך של הפרמטר "$1" הוזן אך הוא לא בשימוש % The identifier was declared (locally or globally) % set but not used (locally or globally). sym_n_local_identifier_only_set=05027_N_הערך של הפרמטר "$1" הוזן אך הוא לא בשימוש % The variable in a procedure or function % implementation is declared, set but never used. sym_h_local_symbol_not_used=05028_H_$1 "$2" מקומי לא בשימוש % A local symbol is never used. sym_n_private_identifier_not_used=05029_N_שדה פרטי "$1.$2" לא בשימוש % The indicated private field is defined, but is never used in the code. sym_n_private_identifier_only_set=05030_N_השדה הפרטי "$1.$2" בעל ערך, אך לא בשימוש % The indicated private field is declared, assigned but never read. sym_n_private_method_not_used=05031_N_המתודה הפרטית "$1.$2" אינה בשימוש % The indicated private method is declared but is never used in the code. sym_e_set_expected=05032_E_מצפה לטיפוס סדרה % The variable or expression is not of type \var{set}. This happens in an % \var{in} statement. sym_w_function_result_not_set=05033_W_הפונקציה כנראה לא מחזירה ערך % You can get this warning if the compiler thinks that a function return % value is not set. This will not be displayed for assembler procedures, % or procedures that contain assembler blocks. sym_w_wrong_C_pack=05034_W_הטיפוס "$1" אינו מייושר נכון לרשומה של שפת C % Arrays with sizes not multiples of 4 will be wrongly aligned % for C structures. sym_e_illegal_field=05035_E_שדה של רשומה לא חוקי "$1" % The field doesn't exist in the record/object definition. sym_w_uninitialized_local_variable=05036_W_המשתנה המקומי "$1" אינו נראה מאותחל % This message is displayed if the compiler thinks that a variable will % be used (i.e. appears in the right-hand-side of an expression) when it % was not initialized first (i.e. appeared in the left-hand side of an % assigment) sym_w_uninitialized_variable=05037_W_המשתנה "$1" אינו נראה מאותחל % This message is displayed if the compiler thinks that a variable will % be used (i.e. appears in the right-hand-side of an expression) when it % was not initialized first (i.e. appeared in the left-hand side of an % assigment) sym_e_id_no_member=05038_E_המזהה בשימוש אינו חבר ב"$1" % This error is generated when an identifier of a record, % field, or method is accessed while it is not defined. sym_h_param_list=05039_H_נמצאה ההכרזה: $1 % You get this when you use the \var{-vh} switch. In case an overloaded % procedure is not found, then all candidate overloaded procedures are % listed, with their parameter lists. sym_e_segment_too_large=05040_E_גודל המידע של האלמנט גדול מידי % You get this when you declare a data element whose size exceeds the % prescribed limit (2 Gb on 80386+/68020+ processors) sym_e_no_matching_implementation_found=05042_E_לא נמצא ביצוע למתודה "$1" של הממשק % There was no matching method found which could implement the interface % method. Check argument types and result type of the methods. sym_w_deprecated_symbol=05043_W_הסימול "$1" מיושן % This means that a symbol (a variable, routine, etc...) which is % declared as \var{deprecated} is used. Deprecated symbols may no longer % be available in newer versions of the unit / library. Usage of this symbol % should be avoided as much as possible. sym_w_non_portable_symbol=05044_W_הסימול "$1" אינו נייד % This means that a symbol (a variable, routine, etc...) which is % declared as \var{platform} is used. This symbol's value, usage % and availability is platform specific and should not be used % if the source code must be portable. sym_w_non_implemented_symbol=05055_W_הסימול "$1" אינו מבוצע % This means that a symbol (a variable, routine, etc...) which is % declared as \var{unimplemented} is used. This symbol is defined, % but is not yet implemented on this specific platform. sym_e_cant_create_unique_type=05056_E_לא ניתן ליצור טיפוס ייחודי מהטיפוס הנוכחי % Only simple types like ordinal, float and string types are supported when % redefining a type with \var{type newtype = type oldtype;}. sym_h_uninitialized_local_variable=05057_H_המשתנה המקומי "$1" אינו נראה מאותחל % This message is displayed if the compiler thinks that a variable will % be used (i.e. appears in the right-hand-side of an expression) when it % was not initialized first (i.e. appeared in the left-hand side of an % assigment) sym_h_uninitialized_variable=05058_H_המשתנה "$1" אינו נראה מאותחל % This message is displayed if the compiler thinks that a variable will % be used (i.e. appears in the right-hand-side of an expression) when it % was not initialized first (i.e. appeared in the left-hand side of an % assigment) sym_w_function_result_uninitialized=05059_W_הערך המוחזר מהפונקציה אינו נראה כמאותחל % This message is displayed if the compiler thinks that the function result % variable will be used (i.e. appears in the right-hand-side of an expression) % before it is initialized (i.e. appeared in the left-hand side of an % assigment) sym_h_function_result_uninitialized=05060_H_הערך המוחזר מהפונקציה אינו נראה כמאותחל % This message is displayed if the compiler thinks that the function result % variable will be used (i.e. appears in the right-hand-side of an expression) % before it is initialized (i.e. appeared in the left-hand side of an % assigment) sym_w_identifier_only_read=05061_W_המשתנה "$1" נקרא, אך מעולם לא קיבל תוכן % You have read the value of a variable, but nowhere assigned a value to % it. sym_h_abstract_method_list=05062_H_נמצאה מתודה מופשטת: $1 % When getting a warning about constructing a class/object with abstract methods % you get this hint to find the affected method. % \end{description} # # Codegenerator # # 06040 is the last used one # % \section{Code generator messages} % This section lists all messages that can be displayed if the code % generator encounters an error condition. % \begin{description} sym_w_experimental_symbol=05063_W_Symbol "$1" is experimental % This means that a symbol (a variable, routine, etc...) which is % declared as \var{experimental} is used. Experimental symbols % might disappear or change semantics in future versions. Usage of this symbol % should be avoided as much as possible. sym_w_forward_not_resolved=05064_W_Forward declaration "$1" not resolved, assumed external % This happens if you declare a function in the \var{interface} of a unit in macpas mode, % but do not implement it. sym_w_library_symbol=05065_W_Symbol "$1" is belongs to a library % This means that a symbol (a variable, routine, etc...) which is % declared as \var{library} is used. Library symbols may not be % available in other libraries. sym_w_deprecated_symbol_with_msg=05066_W_Symbol "$1" is deprecated: "$2" % This means that a symbol (a variable, routine, etc...) which is % declared as \var{deprecated} is used. Deprecated symbols may no longer % be available in newer versions of the unit / library. Use of this symbol % should be avoided as much as possible. sym_e_no_enumerator=05067_E_Cannot find an enumerator for the type "$1" % This means that compiler cannot find an appropriate enumerator to use in the for-in loop. % To create an enumerator you need to define an operator enumerator or add a public or published % GetEnumerator method to the class or object definition. sym_e_no_enumerator_move=05068_E_Cannot find a "MoveNext" method in enumerator "$1" % This means that compiler cannot find a public MoveNext method with the Boolean return type in % the enumerator class or object definition. sym_e_no_enumerator_current=05069_E_Cannot find a "Current" property in enumerator "$1" % This means that compiler cannot find a public Current property in the enumerator class or object % definition. sym_e_objc_para_mismatch=05070_E_Mismatch between number of declared parameters and number of colons in message string. % In Objective-C, a message name automatically contains as many colons as parameters. % In order to prevent mistakes when specifying the message name in FPC, the compiler % checks whether this is also the case here. Note that in case of messages taking a % variable number of arguments translated to FPC via an \var{array of const} parameter, % this final \var{array of const} parameter is not counted. Neither are the hidden % \var{self} and \var{\_cmd} parameters. sym_n_private_type_not_used=05071_N_Private type "$1.$2" never used % The indicated private type is declared but is never used in the code. sym_n_private_const_not_used=05072_N_Private const "$1.$2" never used % The indicated private const is declared but is never used in the code. sym_n_private_property_not_used=05073_N_Private property "$1.$2" never used % The indicated private property is declared but is never used in the code. sym_w_deprecated_unit=05074_W_Unit "$1" is deprecated % This means that a unit which is % declared as \var{deprecated} is used. Deprecated units may no longer % be available in newer versions of the library. Use of this unit % should be avoided as much as possible. sym_w_deprecated_unit_with_msg=05075_W_Unit "$1" is deprecated: "$2" % This means that a unit which is % declared as \var{deprecated} is used. Deprecated units may no longer % be available in newer versions of the library. Use of this unit % should be avoided as much as possible. sym_w_non_portable_unit=05076_W_Unit "$1" is not portable % This means that a unit which is % declared as \var{platform} is used. This unit use % and availability is platform specific and should not be used % if the source code must be portable. sym_w_library_unit=05077_W_Unit "$1" is belongs to a library % This means that a unit which is % declared as \var{library} is used. Library units may not be % available in other libraries. sym_w_non_implemented_unit=05078_W_Unit "$1" is not implemented % This means that a unit which is % declared as \var{unimplemented} is used. This unit is defined, % but is not yet implemented on this specific platform. sym_w_experimental_unit=05079_W_Unit "$1" is experimental % This means that a unit which is % declared as \var{experimental} is used. Experimental units % might disappear or change semantics in future versions. Usage of this unit % should be avoided as much as possible. sym_e_formal_class_not_resolved=05080_E_No complete definition of the formally declared class "$1" is in scope % Objecive-C and Java classes can be imported formally, without using the unit in which it is fully declared. % This enables making forward references to such classes and breaking circular dependencies amongst units. % However, as soon as you wish to actually do something with an entity of this class type (such as % access one of its fields, send a message to it, or use it to inherit from), the compiler requires the full definition % of the class to be in scope. sym_e_interprocgoto_into_init_final_code_not_allowed=05081_E_Gotos into initialization or finalization blocks of units are not allowed % Gotos into initialization or finalization blockse of units are not allowed. sym_e_external_class_name_mismatch1=05082_E_Invalid external name "$1" for formal class "$2" sym_e_external_class_name_mismatch2=05083_E_Complete class definition with external name "$1" here % When a class is declared using a formal external definition, the actual external % definition (if any) must specify the same external name as the formal definition % (since both definitions refer to the same actual class type). sym_w_library_overload=05084_W_Possible library conflict: symbol "$1" from library "$2" also found in library "$3" % Some OS do not have library specific namespaces, for those % OS, the function declared as "external 'libname' name 'funcname'", % the 'libname' part is only a hint, funcname might also be loaded % by another library. This warning appears if 'funcname' is used twice % with two different library names. sym_e_duplicate_id_create_java_constructor=05085_E_Cannot add implicit constructor 'Create' because identifier already used by "$1" % Java does not automatically add inherited constructors to child classes, so that they can be hidden. % However, if a class does not explicitly declare at least one constructor, the compiler is % required to add a public, parameterless constructor. In Java, constructors are nameless, % but in FPC they are all called ``Create''. Therefore, if you do not add a constructor to % a Java class and furthermore use the ``Create'' identifier for another entity (e.g., a field, % or a parameterless method), the compiler cannot satisfy this requirement. sym_e_no_matching_inherited_parameterless_constructor=05086_E_Cannot generate default constructor for class, because parent has no parameterless constructor % Java does not automatically add inherited constructors to child classes, so that they can be hidden. % However, if a class does not explicitly declare at least one constructor, the compiler is % required to add a public, parameterless constructor. This compiler must then call % the parameterless constructor from the parent class inside this added constructor. % This is however impossible if the parent class does not declare such a constructor. % In this case you must add a valid constructor yourself. sym_d_adding_helper_for=05087_D_Adding helper for $1 % A helper for the mentioned type is added to the current scope sym_e_param_list=05088_E_Found declaration: $1 % This message shows all overloaded declarations in case of an error. sym_w_uninitialized_managed_local_variable=05089_W_Local variable "$1" of a managed type does not seem to be initialized % This message is displayed if the compiler thinks that a variable will % be used (i.e. it appears in the right-hand side of an expression) when it % was not initialized first (i.e. appeared in the left-hand side of an % assignment). Since the variable is managed, i. e. implicitly initialized by the compiler, this might be intended behaviour and % does not necessarily mean that the code is wrong. sym_w_uninitialized_managed_variable=05090_W_Variable "$1" of a managed type does not seem to be initialized % This message is displayed if the compiler thinks that a variable will % be used (i.e. it appears in the right-hand side of an expression) when it % was not initialized first (i.e. appeared in the left-hand side of an % assignment). Since the variable is managed, i. e. implicitly initialized by the compiler, this might be intended behaviour and % does not necessarily mean that the code is wrong. sym_h_uninitialized_managed_local_variable=05091_H_Local variable "$1" of a managed type does not seem to be initialized % This message is displayed if the compiler thinks that a variable will % be used (i.e. it appears in the right-hand side of an expression) when it % was not initialized first (i.e. it did not appear in the left-hand side of an % assignment). Since the variable is managed, i. e. implicitly initialized by the compiler, this might be intended behaviour and % does not necessarily mean that the code is wrong. sym_h_uninitialized_managed_variable=05092_H_Variable "$1" of a managed type does not seem to be initialized % This message is displayed if the compiler thinks that a variable will % be used (i.e. it appears in the right-hand side of an expression) when it % was not initialized first (i.e. t did not appear in the left-hand side of an % assignment). Since the variable is managed, i. e. implicitly initialized by the compiler, this might be intended behaviour and % does not necessarily mean that the code is wrong. sym_w_managed_function_result_uninitialized=05093_W_function result variable of a managed type does not seem to initialized % This message is displayed if the compiler thinks that the function result % variable will be used (i.e. it appears in the right-hand side of an expression) % before it is initialized (i.e. before it appeared in the left-hand side of an % assignment). Since the variable is managed, i. e. implicitly initialized by the compiler, this might be intended behaviour and % does not necessarily mean that the code is wrong. sym_h_managed_function_result_uninitialized=05094_H_Function result variable of a managed type does not seem to be initialized % This message is displayed if the compiler thinks that the function result % variable will be used (i.e. it appears in the right-hand side of an expression) % before it is initialized (i.e. it appears in the left-hand side of an % assignment). Since the variable is managed, i. e. implicitly initialized by the compiler, this might be intended behaviour and % does not necessarily mean that the code is wrong. sym_w_duplicate_id=05095_W_Duplicate identifier "$1" % The identifier was already declared in an Objective-C category that's in the % same scope as the current identifier. This is a warning instead of an error, % because while this hides the identifier from the category, there are often % many unused categories in scope. % \end{description} # # Codegenerator # # 06049 is the last used one # % \section{Code generator messages} % This section lists all messages that can be displayed if the code % generator encounters an error condition. % \begin{description} cg_e_parasize_too_big=06009_E_הגודר של רשימת פרמטרים גדולה מ 65535 בתים % The I386 processor limits the parameter list to 65535 bytes (the \var{RET} % instruction causes this) cg_e_file_must_call_by_reference=06012_E_טיפוס של קובץ חייב להיות משתנה מוגדר % You cannot specify files as value parameters, i.e. they must always be % declared \var{var} parameters. cg_e_cant_use_far_pointer_there=06013_E_השימוש במצביע far אינו מורשה במיקום הנוכחי % Free Pascal doesn't support far pointers, so you cannot take the address of % an expression which has a far reference as a result. The \var{mem} construct % has a far reference as a result, so the following code will produce this % error: % \begin{verbatim} % var p : pointer; % ... % p:=@mem[a000:000]; % \end{verbatim} cg_e_dont_call_exported_direct=06015_E_לא ניתן לקרוא לפונקציות עם הגדרת EXPORT % No longer in use. cg_w_member_cd_call_from_method=06016_W_כנראה קריאה לא חוקית של יוצר או הורס % The compiler detected that a constructor or destructor is called within a % a method. This will probably lead to problems, since constructors / destructors % require parameters on entry. cg_n_inefficient_code=06017_N_חסר קוד % Your statement seems dubious to the compiler. cg_w_unreachable_code=06018_W_לא ניתן להריץ את קטע הקוד % You specified a construct which will never be executed. Example: % \begin{verbatim} % while false do % begin % {.. code ...} % end; % \end{verbatim} cg_e_cant_call_abstract_method=06020_E_לא ניתן לקרוא למתודות Abstract בצורה ישירה % You cannot call an abstract method directy, instead you must call a % overriding child method, because an abstract method isn't implemented. cg_d_register_weight=06027_DL_Register $1 משקל $2 $3 % Debugging message. Shown when the compiler considers a variable for % keeping in the registers. cg_d_stackframe_omited=06029_DL_משמיט את מסגרת המחסנית % Some procedure/functions do not need a complete stack-frame, so it is omitted. % This message will be displayed when the {-vd} switch is used. cg_e_unable_inline_object_methods=06031_E_מתודות של אובייקט או מחלקה אינם יכולים להיות inline % You cannot have inlined object methods. cg_e_unable_inline_procvar=06032_E_קריאות Procvar אינם יכולים להיות inline % A procedure with a procedural variable call cannot be inlined. cg_e_no_code_for_inline_stored=06033_E_אין קוד לפרוצדורות inline % The compiler couldn't store code for the inline procedure. cg_e_can_access_element_zero=06035_E_אלמנט האפס של ansi/wide- או longstring לא נגיש, השתמש ב (set)length במקום % You should use \var{setlength} to set the length of an ansi/wide/longstring % and \var{length} to get the length of such a string types cg_e_cannot_call_cons_dest_inside_with=06037_E_לא ניתן לקרוא ליוצרים או הורסים בתוך חלק של 'with' % Inside a \var{with} clause you cannot call a constructor or destructor for the % object you have in the \var{with} clause. cg_e_cannot_call_message_direct=06038_E_לא ניתן לקרוא למתודות של מטפל הודאות בצורה ישירה % A message method handler method cannot be called directly if it contains an % explicit self argument cg_e_goto_inout_of_exception_block=06039_E_קפיצה אל תוך או מחוץ לבלוק של exception % It is not allowed to jump in or outside of an exception block like \var{try..finally..end;}: % \begin{verbatim} % label 1; % % ... % % try % if not(final) then % goto 1; // this line will cause an error % finally % ... % end; % 1: % ... % \end{verbatim} cg_e_control_flow_outside_finally=06040_E_השימוש בביטויים השולטים בזרימת הקוד אינם מורשים בחלק ה finally % It isn't allowed to use the control flow statements \var{break}, % \var{continue} and \var{exit} % inside a finally statement. The following example shows the problem: % \begin{verbatim} % ... % try % p; % finally % ... % exit; // This exit ISN'T allowed % end; % ... % % \end{verbatim} % If the procedure \var{p} raises an exception the finally block is % executed. If the execution reaches the exit, it's unclear what to do: % exiting the procedure or searching for another exception handler cg_w_parasize_too_big=06041_W_גודל הפרמטים גולש את ההגבלות של חלק מהמעבדים % This indicates that you are declaring more than 64K of parameters, which % might not be supported on other processor targets. cg_w_localsize_too_big=06042_W_הגודל של המשתנה המקומי גולש מהגבלות של חלק מהמעבדים % This indicates that you are declaring more than 32K of local variables, which % might not be supported on other processor targets. cg_e_localsize_too_big=06043_E_גודל משתנים מקומיים גולש מהגבלות הנתמכות % This indicates that you are declaring more than 32K of local variables, which % is not supported by this processor. cg_e_break_not_allowed=06044_E_BREAK אינו מורשה % You're trying to use \var{break} outside a loop construction. cg_e_continue_not_allowed=06045_E_CONTINUE אינו מורשה % You're trying to use \var{continue} outside a loop construction. cg_f_unknown_compilerproc=06046_F_compilerproc "$1" לא ידוע. בדוק אם השתמש בספריית זמן הריצה הנכונה. % The compiler expects that the runtime library contains certain subroutines. If you see this error % and you didn't change the runtime library code, it's very likely that the runtime library % you're using doesn't match the used compiler. If you changed the runtime library this error means % that you removed a subroutine which the compiler needs for internal use. cg_f_unknown_system_type=06047_F_לא ניתן למצוא טיפוס מערכת "$1". בדוק האם אתה משתמש בספריית זמן הריצה עדכנית. % The compiler expects that the runtime library contains certain type definitions. If you see this error % and you didn't change the runtime library code, it's very likely that the runtime library % you're using doesn't match the used compiler. If you changed the runtime library this error means % that you removed a type which the compiler needs for internal use. cg_h_inherited_ignored=06048_H_מתעלם מהשימוש בinherited במתודה מסוג abstract % This messages appears only in Delphi mode when you call an abstract method % of a parent class via \var{inherited;}. The call is then ignored. cg_e_goto_label_not_found=06049_E_תווית ה Goto "$1" לא הוגדרה או לא עברה אופטימיזציה % The label used in the goto definition is not defined or optimized away by the % unreachable code elemination. % \end{description} # EndOfTeX # # Assembler reader # # 07105 is the last used one # cg_f_unknown_type_in_unit=06050_F_Cannot find type "$1" in unit "$2". Check if you use the correct run time library. % The compiler expects that the runtime library contains certain type definitions. If you see this error % and you didn't change the runtime library code, it's very likely that the runtime library % you're using doesn't match the compiler in use. If you changed the runtime library this error means % that you removed a type which the compiler needs for internal use. cg_e_interprocedural_goto_only_to_outer_scope_allowed=06051_E_Interprocedural gotos are allowed only to outer subroutines % Gotos between subroutines are only allowed if the goto jumps from an inner to an outer subroutine or % from a subroutine to the main program cg_e_labels_cannot_defined_outside_declaration_scope=06052_E_Label must be defined in the same scope as it is declared % In ISO mode, labels must be defined in the same scope as they are declared. cg_e_goto_across_procedures_with_exceptions_not_allowed=06053_E_Leaving procedures containing explicit or implicit exceptions frames using goto is not allowed % Non-local gotos might not be used to leave procedures using exceptions either implicitly or explicitly. Procedures % which use automated types like ansistrings or class constructurs are affected by this too. cg_e_mod_only_defined_for_pos_quotient=06054_E_In ISO mode, the mod operator is defined only for positive quotient % In ISO pascal, only positive values are allowed for the quotient: \var{n mod m} is only valid if \var{m>0}. cg_d_autoinlining=06055_DL_Auto inlining: $1 % Due to auto inlining turned on, the compiler auto inlines this subroutine. cg_e_function_not_support_by_selected_instruction_set=06056_E_The function used, is not supported by the selected instruction set: $1 % Some functions cannot be implemented efficiently for certain instruction sets, one example is fused multiply/add. % To avoid very inefficient code, the compiler complains in this case, so either select another instruction set % or replace the function call by alternative code cg_f_max_units_reached=06057_F_Maximum number of units ($1) reached for the current target % Depending of target architecture, the number of units is limited. This limit % has been reached. A unit counts only if it contains initialization or finalization count. % % \end{description} # EndOfTeX # # Assembler reader # # 07125 is the last used one # asmr_d_start_reading=07000_DL_מתחיל בסגנון מפרש אסמבלר $1 % This informs you that an assembler block is being parsed asmr_d_finish_reading=07001_DL_הסתיים ניתוח סגנון אסמבלר $1 % This informs you that an assembler block has finished. asmr_e_none_label_contain_at=07002_E_תבנית ללא תווית מכילה את התו @ % A identifier which isn't a label can't contain a @. asmr_e_building_record_offset=07004_E_שגיאה בבניית היסט הרשומה % An error occurred while building the offset of a record/object % structure, this can happend when there is no field specified at all or % an unknown field identifier is used. asmr_e_offset_without_identifier=07005_E_נעשה שימוש בOFFSET ללא מזהה % You can only use OFFSET with an identifier. Other syntaxes aren't % supported asmr_e_type_without_identifier=07006_E_נעשה שימוש בTYPE ללא מזהה % You can only use TYPE with an identifier. Other syntaxes aren't % supported asmr_e_no_local_or_para_allowed=07007_E_לא ניתן להשתמש במשתמה מקומי או פרמטר במיקום הנוכחי % You can't use a local variable or parameter here, mostly because the % addressing of locals and parameters is done using the frame pointer register so the % address can't be obtained directly. asmr_e_need_offset=07008_E_יש צורך להשתמש ב OFFSET % You need to use OFFSET here to get the address of the identifier. asmr_e_need_dollar=07009_E_יש צורך להשתמש ב$ % You need to use $ here to get the address of the identifier. asmr_e_cant_have_multiple_relocatable_symbols=07010_E_לא ניתן להשתמש ב relocatable symbols מרובים % You can't have more than one relocatable symbol (variable/typed constant) % in one argument. asmr_e_only_add_relocatable_symbol=07011_E_ניתן להוסיף רק relocatable symbol % Relocatable symbols (variable/typed constant) can't be used with other % operators. Only addition is allowed. asmr_e_invalid_constant_expression=07012_E_ביטוי קבוע לא חוקי % There is an error in the constant expression. asmr_e_relocatable_symbol_not_allowed=07013_E_Relocatable symbol אינו מורשה % You can't use a relocatable symbol (variable/typed constant) here. asmr_e_invalid_reference_syntax=07014_E_תחביר הפניות לא חוקי % There is an error in the reference. asmr_e_local_para_unreachable=07015_E_לא ניתן לגשת ל $1 מהקוד % You can not read directly the value of a local variable or parameter % of a higher level procedure in assembler code (except for % local assembler code without parameter nor locals). asmr_e_local_label_not_allowed_as_ref=07016_E_סימולים/תוויות מקומיות אינם מורשים כהפניות % You can't use local symbols/labels as references asmr_e_wrong_base_index=07017_E_שימוש שגוי בבסיס ואינדקס של אוגר % There is an error with the base and index register, they are % probably incorrect asmr_w_possible_object_field_bug=07018_W_יתכן כי יש שגיאה בטיפול השדות של אובייקט % Fields of objects or classes can be reached directly in normal or objfpc % modes but TP and Delphi modes treat the field name as a simple offset. asmr_e_wrong_scale_factor=07019_E_צויין טווח סולם שגוי % The scale factor given is wrong, only 1,2,4 and 8 are allowed asmr_e_multiple_index=07020_E_שימוש מרובה באינקס האוגר % You are trying to use more than one index register asmr_e_invalid_operand_type=07021_E_טיפוס אופרנד שגוי % The operand type doesn't match with the opcode used asmr_e_invalid_string_as_opcode_operand=07022_E_אשימוש במחרוזת כאופרנד opcode שגוי: $1 % The string specified as operand is not correct with this opcode asmr_w_CODE_and_DATA_not_supported=07023_W_השימוש ב@CODE ו@DATA לא נתמך % @CODE and @DATA are unsupported and are ignored. asmr_e_null_label_ref_not_allowed=07024_E_התייחסות לתווית ריקה אינה מורשת asmr_e_expr_zero_divide=07025_E_חילוק באפס בהערכת asm % There is a division by zero in a constant expression asmr_e_expr_illegal=07026_E_ביטוי לא חוקי % There is an illegal expression in a constant expression asmr_e_escape_seq_ignored=07027_E_מתעלם מרצף קידוד: $1 % There is a C-styled string, but the escape sequence in the string % is unknown, and is therefore ignored asmr_e_invalid_symbol_ref=07028_E_התייחסות סימול לא תקינה asmr_w_fwait_emu_prob=07029_W_FWAIT מסוגל לגרום לבעיות חיקוי בemu387 asmr_w_fadd_to_faddp=07030_W_$1 ללא תרגום אופרנד ל$1P asmr_w_enter_not_supported_by_linux=07031_W_הוראת ENTER אינה נתמכת ע"י ליבת Linux % ENTER instruction can generate a stack page fault that is not % caught correctly by the i386 Linux page handler. asmr_w_calling_overload_func=07032_W_מבצע קריאה לפונקציה משוכתבת בassembler % There is a call to an overloaded method in the assembler block, % this might be the sign there is a problem asmr_e_unsupported_symbol_type=07033_E_טיפוס הסימול של האופרנד אינו נתמך asmr_e_constant_out_of_bounds=07034_E_תוכן הקבוע מחוץ לגבולות asmr_e_error_converting_decimal=07035_E_שגיאה בזמן המרה דצימלית $1 % A constant decimal value does not have the correct syntax asmr_e_error_converting_octal=07036_E_שגיאה בזמן המרה אוקטלית $1 % A constant octal value does not have the correct syntax asmr_e_error_converting_binary=07037_E_שגיאה בזמן המרה בינרית $1 % A constant binary value does not have the correct syntax asmr_e_error_converting_hexadecimal=07038_E_שגיאה בזמן המרה הקסה-דצימלית $1 % A constant hexadecimal value does not have the correct syntax asmr_h_direct_global_to_mangled=07039_H_$1 תורגם ל $2 asmr_w_direct_global_is_overloaded_func=07040_W_$1 משוייך לפונקציה משוכתבת asmr_e_cannot_use_SELF_outside_a_method=07041_E_לא ניתן להשתמש ב SELF מחוץ למתודה % There is a reference to the \var{self} symbol while it is not % allowed. \var{self} can only be referenced inside methods asmr_e_cannot_use_OLDEBP_outside_nested_procedure=07042_E_לא ניתן להשתמש ב OLDEBP מחוץ לפרוצדורה מקוננת % There is a reference to the \var{oldebp} symbol while it is not % allowed. \var{oldebp} can only be referenced inside nested routines asmr_e_void_function=07043_W_פרוצדורות אינם יכולים להחזיר ערך בתוך קוד assembly % Trying to return a value while in a procedure. A procedure % does not have any return value asmr_e_SEG_not_supported=07044_E_SEG אינו נתמך asmr_e_size_suffix_and_dest_dont_match=07045_E_גודל סופי ויעד, או מקור הגודל אינם תואמים % The register size and the opcode size suffix don't match. This is % probably an error in the assembler statement asmr_w_size_suffix_and_dest_dont_match=07046_W_גודל סופי ויעד, או מקור הגודל אינם תואמים % The register size and the opcode size suffix don't match. This is % probably an error in the assembler statement asmr_e_syntax_error=07047_E_שגיאה בתחביר Assembler % There is an assembler syntax error asmr_e_invalid_opcode_and_operand=07048_E_שילוב לא חוקי בין opcode ואופרנד % The opcode cannot be used with this type of operand asmr_e_syn_operand=07049_E_שגיאה בתחביר אופרנד בAssembler asmr_e_syn_constant=07050_E_שגיאה בתחביר קבוע בAssembler asmr_e_invalid_string_expression=07051_E_ביטוי מחרוזת לא תקין asmr_w_const32bit_for_address=07052_W_הקבוע בעל הסימול $1 לכתובת, הוא לא מצביע % A constant expression represents an address which does not fit % into a pointer. The address is probably incorrect asmr_e_unknown_opcode=07053_E_opcode $1 אינו מוכר % This opcode is not known asmr_e_invalid_or_missing_opcode=07054_E_opcode חסר או לא תקין asmr_e_invalid_prefix_and_opcode=07055_E_שילוב של תחילית וopcode לא תקין : $1 asmr_e_invalid_override_and_opcode=07056_E_השילוב של שכתוב וopcode לא תקין: $1 asmr_e_too_many_operands=07057_E_Too many operands on line % There are too many operands for this opcode. Check your % assembler syntax asmr_w_near_ignored=07058_W_מתעלם מNEAR asmr_w_far_ignored=07059_W_מתעלם מ FAR asmr_e_dup_local_sym=07060_E_שיכפול של הסימול המקומי $1 asmr_e_unknown_local_sym=07061_E_הסימול המקומי $1 אינו מוגדר asmr_e_unknown_label_identifier=07062_E_מזהה תווית $1 לא ידוע asmr_e_invalid_register=07063_E_שם אוגר שגוי % There is an unknown register name used as operand. asmr_e_invalid_fpu_register=07064_E_שם אוגר לנקודה צפה לא תקין % There is an unknown register name used as operand. asmr_w_modulo_not_supported=07066_W_מודולו לא נתמך asmr_e_invalid_float_const=07067_E_קבוע של נקודה צפה לא תקין $1 % The floating point constant declared in an assembler block is % invalid. asmr_e_invalid_float_expr=07068_E_ביטוי לא תקין של נקודה צפה % The floating point expression declared in an assembler block is % invalid. asmr_e_wrong_sym_type=07069_E_סוג סימול שגוי asmr_e_cannot_index_relative_var=07070_E_לא ניתן לשמור ציון של פרמטר או משתנה מקומי עם אוגר % Trying to index using a base register a symbol which is already relative % to a register. This is not possible, and will probably lead to crashes. asmr_e_invalid_seg_override=07071_E_ביטוי המיקטע המשוכתב אינו תקין asmr_w_id_supposed_external=07072_W_המזהה $1 אינו נמצא, מניח שהמזהה חיצוני % There is a reference to an undefined symbol. This will not result % in an error, since the symbol might be external, but may cause % problems at link time if the symbol is not defined anywhere. asmr_e_string_not_allowed_as_const=07073_E_המחרוזות אינן מורשות להיות קבועות % Character strings are not allowed as constants. asmr_e_no_var_type_specified=07074_לא צויין טיפוס המשתנה % The syntax expects a type idenfitifer after the dot, but % none was found. asmr_w_assembler_code_not_returned_to_text=07075_E_קוד הassembler לא חזר לאיזור הטקסט % There was a directive in the assembler block to change sections, % but there is a missing return to the text section at the end % of the assembler block. This might cause errors during link time. asmr_e_not_directive_or_local_symbol=07076_E_$1 הוא לא הנחיה או סימול מקומי % This symbol is unknown. asmr_w_using_defined_as_local=07077_E_משתמש בהגדרת השם כתווית מקומית asmr_e_dollar_without_identifier=07078_E_השימוש בתו הדולר מתבצע ללא מזהה % A constant expression has an identifier which does not start with % the $ symbol. asmr_w_32bit_const_for_address=07079_W_מספק כתובת של 32 סיביות לקבוע % A constant was used as an address. This is probably an error, % since using absolute addresses will probably not work. asmr_n_align_is_target_specific=07080_N_השימוש ב.align מבוסס על סוג יעד, השתמש ב.balign או .p2align % Using the .align directive is platform specific, and its meaning will vary % from one platform to another. asmr_e_cannot_access_field_directly_for_parameters=07081_E_לא ניתן להשתמש בצורה ישירה בשדות של פרמטרים % You should load the parameter first into a register and then access the % fields using that register. asmr_e_cannot_access_object_field_directly=07082_E_לא ניתן לגשת בצורה ישירה לשדות של אובייקטים/מחלקות % You should load the self pointer first into a register and then access the % fields using the register as base. By default the self pointer is available % in the esi register on i386. asmr_e_unable_to_determine_reference_size=07083_E_לא ניתן לקבוע את גודל האופרנדים ללא ציון של הגודל % You should specify explicitly a size for the reference, because % the compiler is unable to determine what size (byte,word,dword,etc.) it % should use for the reference. asmr_e_cannot_use_RESULT_here=07084_E_לא ניתן להשתמש בRESULT בפונקציה הנוכחית % Some functions which return complex types cannot use the \var{result} % keyword. asmr_w_adding_explicit_args_fXX=07086_W_"$1" ללא תרגום של אופרנדים ל "$1 %st,%st(1)" asmr_w_adding_explicit_first_arg_fXX=07087_W_"$1 %st(n)" תורגם ל "$1 %st,%st(n)" asmr_w_adding_explicit_second_arg_fXX=07088_W_"$1 %st(n)" תורגם ל "$1 %st(n),%st" asmr_e_invalid_char_smaller=07089_E_התו > אינו מורשה כאן % The shift operator requires the << characters. Only one % of those characters was found. asmr_e_invalid_char_greater=07090_E_התו < אינו מורשה כאן % The shift operator requires the >> characters. Only one % of those characters was found. asmr_w_align_not_supported=07093_W_ALIGN אינו נתמך asmr_e_no_inc_and_dec_together=07094_E_השימוש INC ו DEC אינם יכולים להגיע בייחד % Trying to use an increment and a decrement within the same % opcode on the 680x0. This is impossible. asmr_e_invalid_reg_list_in_movem=07095_E_שימוש בreglist ל movem לא תקין % Trying to use the \var{movem} opcode with invalid registers % to save or restore. asmr_e_invalid_reg_list_for_opcode=07096_E_שימוש שגוי בreglist לopcode asmr_e_higher_cpu_mode_required=07097_E_זקוק למצב מעבד גבוהה יותר ($1) % Trying to use an instruction which is not supported in the current % cpu mode. Use a higher cpu generation to be able to use this % opcode in your assembler block asmr_w_unable_to_determine_reference_size_using_dword=07098_W_לא צויין גודל של אופרנד ולא ניתן לנחש את הגודל, משתמש בDWORD כברירת מחדל % You should specify explicitly a size for the reference, because % the compiler is unable to determine what size (byte,word,dword,etc.) it % should use for the reference. This warning is only used in Delphi mode where % it falls back to use DWORD as default. asmr_e_illegal_shifterop_syntax=07099_E_שגיאת תחביר בעת ניסיון לפרש הסטת אופרנד % ARM only; ARM assembler supports a so called shifter operand. The used syntax isn't % a valid shifter operand. Example for an operation with shifter operand: % \begin{verbatim} % asm % orr r2,r2,r2,lsl #8 % end; % \end{verbatim} asmr_e_packed_element=07100_E_הכתובת של רכיב ארוז אינו נמצא בטווח של בית % Packed components (record fields and array elements) may start at an arbitrary % bit inside a byte. On CPU which do not support bit-addressable memory (which % includes all currently supported CPUs by FPC) you will therefore get an error % message when trying to index arrays with elements whose size is not a multiple % of 8 bits. The same goes for accessing record fields with such an address. % multiple of 8 bits. asmr_w_unable_to_determine_reference_size_using_byte=07101_W_לא צויין גודל, והמהדר אינו מצליח לקבוע את גודל האופרנד, משתמש בגודל BYTE בתור ברירת מחדל % You should specify explicitly a size for the reference, because % the compiler is unable to determine what size (byte,word,dword,etc.) it % should use for the reference. This warning is only used in Delphi mode where % it falls back to use BYTE as default. asmr_w_no_direct_ebp_for_parameter=07102_W_לא ניתן להשתמש ב+הסט(%ebp) במיקום הנוכי עבור הפרמטרים % Using direct 8(%ebp) reference for function/procedure parameters is invalid % if parameters are in registers. asmr_w_direct_ebp_for_parameter_regcall=07103_W_השימוש ב+הסט(%ebp) אינו תואם עם מוסכמות ה regcall % Using direct 8(%ebp) reference for function/procedure parameters is invalid % if parameters are in registers. asmr_w_direct_ebp_neg_offset=07104_W_השימוש ב-הסט(%ebp) אינו מומלץ עבור גישה למשתנים מקומיים % Using -8(%ebp) to access a local variable is not recommended asmr_w_direct_esp_neg_offset=07105_W_השימוש ב-הסט(%ebp) עלול לגרום לקריסה של התוכנית או לאיבוד המידע % Using -8(%esp) to access a local stack is not recommended, as % this stack portion can be overwritten by any function calls or interrupts. asmr_e_no_vmtoffset_possible=07106_E_השימוש ב VMTOffset חייב להגיע בשילוב של מתודות ווירטואליות ו "$1" אינו ווירטואלי % \end{verbatim} # # Assembler/binary writers # # 08018 is the last used one # asmr_e_need_pic_ref=07107_E_Generating PIC, but reference is not PIC-safe % The compiler has been configured to generate position-independent code % (PIC), but there are position-dependent references in the current % handwritten assembler instruction. asmr_e_mixing_regtypes=07108_E_All registers in a register set must be of the same kind and width % Instructions on the ARM architecture that take a register set as argument require that all registers % in this set are of the same kind (e.g., integer, vfp) and width (e.g., single precision, double precision). asmr_e_empty_regset=07109_E_A register set cannot be empty % Instructions on the ARM architecture that take a register set as argument require that such a set % contains at least one register. asmr_w_useless_got_for_local=07110_W_@GOTPCREL is useless and potentially dangerous for local symbols % The use of @GOTPCREL supposes an extra indirection that is % not present if the symbol is local, which might lead to wrong assembler code asmr_w_general_segment_with_constant=07111_W_Constant with general purpose segment register % General purpose register should not have constant offsets % as OS memory allocation might not be compatible with that. asmr_e_bad_seh_directive_offset=07112_E_Invalid offset value for $1 % Win64 SEH directives have certain restrictions on possible offset values, e.g. they should % be positive and have 3 or 4 low bits clear. asmr_e_bad_seh_directive_register=07113_E_Invalid register for $1 % Win64 SEH directives accept only 64-bit integer registers or XMM registers. asmr_e_seh_in_pure_asm_only=07114_E_SEH directives are allowed only in pure assembler procedures % Win64 SEH directives are allowed only in pure assembler procedures, not in assembler % blocks of regular procedures. asmr_e_unsupported_directive=07115_E_Directive "$1" is not supported for the current target asmr_e_complex_function_result_location=07116_E_This function's result location cannot be encoded directly in a single operand when "nostackframe" is used % Functions declared with the \var{nostackframe} modifier do not have a stack frame, and hence % do not have a local variable to hold the temporary function result. Accesses to the function % result in such routines directly go to the registers or memory location that will be used % to return their result to the caller. In some cases this result may be spread over multiple % registers, in which case it is not possible to access the location via its symbolic name. % You have to directly use the appropriate register names in this case. asmr_e_wrong_gotpcrel_intel_syntax=07117_E_GOTPCREL references in Intel assembler syntax cannot contain a base or index register, and their offset must 0. % The syntax for a gotpcrel PIC memory expression in Intel assembler syntax is % \verb*[global_symbol wrt ..gotpcrel]* asmr_e_no_gotpcrel_support=07118_E_The current target does not support GOTPCREL relocations % Not all targets support position-independent code using a global offset table. % Use a different way to access symbols in a position-indepent way in these cases. asmr_w_global_access_without_got=07119_W_Exported/global symbols should be accessed via the GOT % Global symbols (symbols from the unit interface, or defined in a program % or library) should be accessed via the GOT when generating position-indepent code. asmr_w_check_mem_operand_size=07120_W_Check size of memory operand "$1" % The size of memory operand is possible invalid. This is % probably an error in the assembler statement asmr_w_check_mem_operand_size3=07121_W_Check size of memory operand "$1: memory-operand-size is $2 bits, but expected [$3 bits]" % The size of memory operand is possible invalid. This is % probably an error in the assembler statement asmr_w_check_mem_operand_size_offset=07122_W_Check size of memory operand "$1: memory-operand-size is $2 bits, but expected [$3 bits + $4 byte offset]" % The size of memory operand is possible invalid. This is % probably an error in the assembler statement asmr_w_check_mem_operand_negative_offset=07123_W_Check "$1: offset of memory operand is negative "$2 byte" % The offset of memory operand is possible invalid. This is % probably an error in the assembler statement asmr_w_check_mem_operand_automap_multiple_size=07124_W_Check "$1: size of memory operand is empty, but es exists different definitions of the memory size =>> map to $2 (smallest option)" % The size of memory operand is empty and we have different definitions of possible memory sizes. Check it! asmr_e_invalid_ref_register=07125_E_Invalid register used in memory reference expression: "$1" % FPU, vector and sometimes integer registers cannot be used in memory reference % expressions, due to limitations of the cpu architecture or simple because % it is not meaningful. # # Assembler/binary writers # # 08029 is the last used one # asmw_f_too_many_asm_files=08000_F_יותר מידי קבצי assembler % With smartlinking enabled, there are too many assembler % files generated. Disable smartlinking. asmw_f_assembler_output_not_supported=08001_F_סוג הפלט של הassembler אינו נתמך asmw_f_comp_not_supported=08002_F_Comp אינו נתמך asmw_f_direct_not_supported=08003_F_מצב ישיר של assembler אינו נתמך ע"י כותבים בינאריים % Direct assembler mode is not supported for binary writers. asmw_e_alloc_data_only_in_bss=08004_E_אתחול המידע מורשה רק בחלק הbss asmw_f_no_binary_writer_selected=08005_F_לא נבחר כותב בינארי asmw_e_opcode_not_in_table=08006_E_Asm: Opcode $1 הוא לא טבלה asmw_e_invalid_opcode_and_operands=08007_E_Asm: $1 הינו שילוב שגוי בין opcode לבין אופרנד asmw_e_16bit_not_supported=08008_E_Asm: התייחסות של 16 סיביות אינו נתמך asmw_e_invalid_effective_address=08009_E_Asm: מען בפעול לא תקין asmw_e_immediate_or_reference_expected=08010_E_Asm: מצפה להתייחסות לאופרנד או אופרנד מידי asmw_e_value_exceeds_bounds=08011_E_Asm: $1 גולש מהגבולות $2 asmw_e_short_jmp_out_of_range=08012_E_Asm: Short jump מחוץ לטווח $1 asmw_e_undefined_label=08013_E_Asm: תווית לא מוגדרת $1 asmw_e_comp_not_supported=08014_E_Asm: הטיפוס COMP לא נתמך ביעד המבוקש asmw_e_extended_not_supported=08015_E_Asm: הטיפוס Extended אינו נתמך ביעד המבוקש asmw_e_duplicate_label=08016_E_Asm: תוויות כפולה $1 asmw_e_redefined_label=08017_E_Asm: מגדיר מחדש את התווית $1 asmw_e_first_defined_label=08018_E_Asm: מוגדר כאן לראשונה asmw_e_invalid_register=08019_E_Asm: אוגר שגוי $1 asmw_e_16bit_32bit_not_supported=08020_E_Asm: ההתייחסות ל16 או 32 סיביות אינה נתמכת asmw_e_64bit_not_supported=08021_E_Asm: האופרנט 64 סיביות אינו נתמך # # Executing linker/assembler # # 09034 is the last used one # # BeginOfTeX % % \section{Errors of assembling/linking stage} % This section lists errors that occur when the compiler is processing the % command line or handling the configuration files. % \begin{description} asmw_e_bad_reg_with_rex=08022_E_Asm: AH,BH,CH or DH cannot be used in an instruction requiring REX prefix % x86_64 only: instruction encoding of this platform does not allow using % 8086 high byte registers (AH,BH,CH or DH) together with REX prefix in a single instruction. % The REX prefix is required whenever the instruction operand size is 64 bits, or % when it uses one of extended x86_64 registers (R8-R15 or XMM8-XMM15). asmw_e_missing_endprologue=08023_E_Missing .seh_endprologue directive % x86_64-win64 only: Normally, SEH directives are handled internally by compiler. % However, in pure assembler procedures .seh_endprologue directive is required % if other SEH directives are present. asmw_e_prologue_too_large=08024_E_Function prologue exceeds 255 bytes % x86_64-win64: .seh_prologue directive must be placed within 255 bytes from function start. asmw_e_handlerdata_no_handler=08025_E_.seh_handlerdata directive without preceding .seh_handler % x86_64-win64: If .seh_handlerdata directive is used, then a .seh_handler directive must be % present earlier in the same function. asmw_f_too_many_relocations=08026_F_Relocation count for section $1 exceeds 65535 % Legacy COFF targets limit number of relocations per section to 65535 because they use a 2-byte field % to store the relocation count. Targets using newer PECOFF format do not have this limitation. asmw_w_changing_bind_type=08027_N_Change of bind type of symbol $1 from $2 to $3 after use asmw_h_changing_bind_type=08028_H_Change of bind type of symbol $1 from $2 to $3 after use % An assembler symbol bind type has been altered after use, which can lead to wrong code. % First version is reserved for changig to local label, which is the most probable cause % of wrong code generation, but currently set to Note level as it appears inside % the compiler compilation. asmw_e_32bit_not_supported=08029_E_Asm: 32 Bit references not supported # # Executing linker/assembler # # 09035 is the last used one # # BeginOfTeX % % \section{Errors of assembling/linking stage} % This section lists errors that occur when the compiler is processing the % command line or handling the configuration files. % \begin{description} exec_w_source_os_redefined=09000_W_מקור מערכת ההפעלה מוגדר מחדש % The source operating system is redefined. exec_i_assembling_pipe=09001_I_מרכיב (צינור) $1 % Assembling using a pipe to an external assembler. exec_d_cant_create_asmfile=09002_E_לא ניתן ליצור את קובץ הassembler $1 % The mentioned file can't be created. Check if you have got % access permissions to create this file exec_e_cant_create_objectfile=09003_E_לא ניתן ליצור את קובץ אובייקט $1 % The mentioned file can't be created. Check if you've % got access permissions to create this file exec_e_cant_create_archivefile=09004_E_לא ניתן ליצור את קובץ הארכיון $1 % The mentioned file can't be created. Check if you've % access permissions to create this file exec_e_assembler_not_found=09005_E_המקשר $1 אינו נמצא, עובר למאסף חיצוני % The assembler program was not found. The compiler will produce a script that % can be used to assemble and link the program. exec_t_using_assembler=09006_T_משתמש במאסף: $1 % Information message saying which assembler is being used. exec_e_error_while_assembling=09007_E_שגיאה בזמן איסוף קוד יציאה $1 % There was an error while assembling the file using an external assembler. % Consult the documentation of the assembler tool to find out more information % on this error. exec_e_cant_call_assembler=09008_E_לא ניתן להריץ את המאסף, שגיאה $1, מריץ מאסף חיצוני % An error occurred when calling an external assembler, The compiler will produce a script that % can be used to assemble and link the program. exec_i_assembling=09009_I_מקשר $1 % An informational message stating which file is being assembled. exec_i_assembling_smart=09010_I_אוסף עם smartlinking $1 % An informational message stating which file is being assembled using smartlinking. exec_w_objfile_not_found=09011_W_האובייקט $1 לא נמצא, נראה שהאיסוף יכשל ! % One of the object file is missing, and linking will probably fail. % Check your paths. exec_w_libfile_not_found=09012_W_הספרייה $1 לא נמצאה, נראה שהאיסוף יכשל ! % One of the library file is missing, and linking will probably fail. % Check your paths. exec_e_error_while_linking=09013_E_שגיאה בזמן קישור % Generic error while linking. exec_e_cant_call_linker=09014_E_לא ניתן להריץ את המקשר, עובר למקשר חיצוני % An error occurred when calling an external linker, The compiler will produce a script that % can be used to assemble and link the program. exec_i_linking=09015_I_מקשר $1 % An informational message, showing which program or library is being linked. exec_e_util_not_found=09016_E_הכלי $1 לא נמצא, עובר למקשר חיצוני % An external tool was not found, the compiler will produce a script that % can be used to assemble and link or postprocess the program. exec_t_using_util=09017_T_משתמש בכלי $1 % An informational message, showing which external program (usually a postprocessor) is being used. exec_e_exe_not_supported=09018_E_אין תמיכה ביצירת קבצי ריצה % Creating executable programs is not supported for this platform, because it was % not yet implemented in the compiler. exec_e_dll_not_supported=09019_E_אין תמיכה ביצירת ספריות דינמיות/משותפות % Creating dynamically loadable libraries is not supported for this platform, because it was % not yet implemented in the compiler. exec_e_static_lib_not_supported=09035_E_Creation of Static Libraries not supported % Creating static libraries is not supported for this platform, because it was % not yet implemented in the compiler. exec_i_closing_script=09020_I_סוגר את התסריט $1 % Informational message showing when the external assembling an linking script is finished. exec_e_res_not_found=09021_E_מהדר משאבים לא נמצא, עובר למצב חיצוני % An external resource compiler was not found, the compiler will produce a script that % can be used to assemble, compile resources and link or postprocess the program. exec_i_compilingresource=09022_I_מהדר את המשאב $1 % An informational message, showing which resource is being compiled. exec_t_unit_not_static_linkable_switch_to_smart=09023_T_לא ניתן לקשר את היחידה $1 בצורה סטטית, עובר לקישור חכם % Statical linking was requested, but a unit which is not statically linkable was used. exec_t_unit_not_smart_linkable_switch_to_static=09024_T_לא ניתן לקשר בצורה חכמה את היחידה $1, עובר לקישור סטטי % Smart linking was requested, but a unit which is not smart-linkable was used. exec_t_unit_not_shared_linkable_switch_to_static=09025_T_לא ניתן לקשר את היחידה $1 בקישור משותף, עובר לקישור סטטי % Shared linking was requested, but a unit which is not shared-linkable was used. exec_e_unit_not_smart_or_static_linkable=09026_E_לא ניתן לקשר את היחידה $1 בקישור חכם או בקישור סטטי % Smart or static linking was requested, but a unit which cannot be used for either was used. exec_e_unit_not_shared_or_static_linkable=09027_E_לא ניתן לקשר את היחידה $1 בקישור משותף או סטטי % Shared or static linking was requested, but a unit which cannot be used for either was used. exec_d_resbin_params=09028_D_מריץ את מהדר המשאבים "$1" עם "$2" בתור שורת פקודה % An informational message showing which command-line is used for the resource compiler. %\end{description} # EndOfTeX # # Executable information # # BeginOfTeX % \section{Executable information messages.} % This section lists all messages that the compiler emits when an executable program is produced, % and only when the internal linker is used. % \begin{description} exec_e_error_while_compiling_resources=09029_E_Error while compiling resources % The resource compiler or converter returned an error. exec_e_cant_call_resource_compiler=09030_E_Can't call the resource compiler "$1", switching to external mode % An error occurred when calling a resource compiler. The compiler will produce % a script that can be used to assemble, compile resources and link or % postprocess the program. exec_e_cant_open_resource_file=09031_E_Can't open resource file "$1" % An error occurred resource file cannot be opened. exec_e_cant_write_resource_file=09032_E_Can't write resource file "$1" % An error occurred resource file cannot be written. exec_n_backquote_cat_file_not_found=09033_N_File "$1" not found for backquoted cat command % The compiler did not find the file that should be expanded into linker parameters exec_w_init_file_not_found=09034_W_"$1" not found, this will probably cause a linking failure % The compiler adds certain startup code files to the linker only when they are found. % If they are not found, they are not added and this might cause a linking failure. % %\end{description} # EndOfTeX # # Executable information # # 09134 is the last used one # # BeginOfTeX % \section{Executable information messages.} % This section lists all messages that the compiler emits when an executable program is produced, % and only when the internal linker is used. % \begin{description} execinfo_f_cant_process_executable=09128_F_לא מצליח לבצע מעבר סופי על קובץ ההרצה $1 % Fatal error when the compiler is unable to post-process an executable. execinfo_f_cant_open_executable=09129_F_לא מצליח לפתוח את קובץ הריצה $1 % Fatal error when the compiler cannot open the file for the executable. execinfo_x_codesize=09130_X_גודל הקוד: $1 בתים % Informational message showing the size of the produced code section. execinfo_x_initdatasize=09131_X_הגודל של מידע מאותחל: $1 בתים % Informational message showing the size of the initialized data section. execinfo_x_uninitdatasize=09132_X_מידע של מידע לא מאותחל: $1 בתים % Informational message showing the size of the uninitialized data section. execinfo_x_stackreserve=09133_X_גודל המחסנית השמורה: $1 בתים % Informational message showing the stack size that the compiler reserved for the executable. execinfo_x_stackcommit=09134_X_גודל המחסנית בשימוש: $1 בתים % Informational message showing the stack size that the compiler commites for the executable. %\end{description} # EndOfTeX # # Unit loading # # 10041 is the last used one # # BeginOfTeX % \section{Unit loading messages.} % This section lists all messages that can occur when the compiler is % loading a unit from disk into memory. Many of these messages are % informational messages. % \begin{description} link_f_executable_too_big=09200_F_Executable image size is too big for $1 target. % Fatal error when resulting executable is too big. link_w_32bit_absolute_reloc=09201_W_Object file "$1" contains 32-bit absolute relocation to symbol "$2". % Warning when 64-bit object file contains 32-bit absolute relocations. % In such case an executable image can be loaded into lower 4Gb of % address space only. %\end{description} # EndOfTeX # # Unit loading # # 10062 is the last used one # # BeginOfTeX % \section{Unit loading messages.} % This section lists all messages that can occur when the compiler is % loading a unit from disk into memory. Many of these messages are % informational messages. % \begin{description} unit_t_unitsearch=10000_T_מחפש את היחידה: $1 % When you use the \var{-vt}, the compiler tells you where it tries to find % unit files. unit_t_ppu_loading=10001_T_טוען את קובץ ה PPU $1 % When the \var{-vt} switch is used, the compiler tells you % what units it loads. unit_u_ppu_name=10002_U_שם ה PPU: $1 % When you use the \var{-vu} flag, the unit name is shown. unit_u_ppu_flags=10003_U_דגלי PPU: $1 % When you use the \var{-vu} flag, the unit flags are shown. unit_u_ppu_crc=10004_U_PPU Crc: $1 % When you use the \var{-vu} flag, the unit CRC check is shown. unit_u_ppu_time=10005_U_זמן PPU: $1 % When you use the \var{-vu} flag, the time the unit was compiled is shown. unit_u_ppu_file_too_short=10006_U_קובץ הPPU קצר מידי % The ppufile is too short, not all declarations are present. unit_u_ppu_invalid_header=10007_U_הראש של קובץ ה PPU אינו תקין (הקובץ אינו מכיל PPU בהתחלה) % A unit file contains as the first three bytes the ascii codes of \var{PPU} unit_u_ppu_invalid_version=10008_U_גרסה לא תקינה של הPPU $1 % This unit file was compiled with a different version of the compiler, and % cannot be read. unit_u_ppu_invalid_processor=10009_U_קובץ הPPU הודר למעבד אחר % This unit file was compiled for a different processor type, and % cannot be read unit_u_ppu_invalid_target=10010_U_קובץ הPPU הודר למטרה אחרת % This unit file was compiled for a different target, and % cannot be read unit_u_ppu_source=10011_U_מקור הPPU: $1 % When you use the \var{-vu} flag, the unit source file name is shown. unit_u_ppu_write=10012_U_כותב $1 % When you specify the \var{-vu} switch, the compiler will tell you where it % writes the unit file. unit_f_ppu_cannot_write=10013_F_לא כותב את קובץ ה PPU % An error occurred when writing the unit file. unit_f_ppu_read_error=10014_F_שגיאה בזמן קריאת קובץ ה PPU % This means that the unit file was corrupted, and contains invalid % information. Recompilation will be necessary. unit_f_ppu_read_unexpected_end=10015_F_סוף קובץ לא צפוי (קובץ PPU) % Unexpected end of file. This may mean that the PPU file is % corrupted. unit_f_ppu_invalid_entry=10016_F_כניסה לא תקינה בקובץ ה PPU: $1 % The unit the compiler is trying to read is corrupted, or generated with a % newer version of the compiler. unit_f_ppu_dbx_count_problem=10017_F_בעיה בספירת Dbx בקובץ PPU % There is an inconsistency in the debugging information of the unit. unit_e_illegal_unit_name=10018_E_שם יחידה לא תקין: $1 % The name of the unit does not match the file name. unit_f_too_much_units=10019_F_יותר מידי יחידות % \fpc has a limit of 1024 units in a program. You can change this behavior % by changing the \var{maxunits} constant in the \file{fmodule.pas} file of the % compiler, and recompiling the compiler. unit_f_circular_unit_reference=10020_F_קריאה מעגלית בין היחידות $1 ו $2 % Two units are using each other in the interface part. This is only allowed % in the \var{implementation} part. At least one unit must contain the other one % in the \var{implementation} section. unit_f_cant_compile_unit=10021_F_אין מספיק משאבים על מנת להדר את היחידה $1 % A unit was found that needs to be recompiled, but no sources are % available. unit_f_cant_find_ppu=10022_F_לא מוצא את היחידה $1 % You tried to use a unit of which the PPU file isn't found by the % compiler. Check your configuration file for the unit paths unit_w_unit_name_error=10023_W_היחידה $1 לא נמצאה, אבל $2 קיים % This error message is no longer used. unit_f_unit_name_error=10024_F_מחפש את היחידה $1, אבל $2 נמצא % Dos truncation of 8 letters for unit PPU files % may lead to problems when unit name is longer than 8 letters. unit_w_switch_us_missed=10025_W_הידור יחידת system דורשת את המתג -Us % When recompiling the system unit (it needs special treatment), the % \var{-Us} must be specified. unit_f_errors_in_unit=10026_F_עוצר לאחר שנמצאו $1 שגיאות בזמן הידור המודול % When the compiler encounters a fatal error or too many errors in a module % then it stops with this message. unit_u_load_unit=10027_U_טוען $1 ($2) יחידה $3 % When you use the \var{-vu} flag, which unit is loaded from which unit is % shown. unit_u_recompile_crc_change=10028_U_מהדר את $1 לאחר שהחתימה שונתה ל $2 % The unit is recompiled because the checksum of a unit it depends on has % changed. unit_u_recompile_source_found_alone=10029_U_נמצא רק קוד מקור, מהדר מחדש את $1 % When you use the \var{-vu} flag, these messages tell you why the current % unit is recompiled. unit_u_recompile_staticlib_is_older=10030_U_מהדר מחדש את היחידה. הספרייה הסטטית ישנה יותר מקובץ ה PPU % When you use the \var{-vu} flag, the compiler warns if the static library % of the unit are older than the unit file itself. unit_u_recompile_sharedlib_is_older=10031_U_מהדר מחדש את היחידה. הספרייה המשותפת ישנה יותר מקובץ ה PPU % When you use the \var{-vu} flag, the compiler warns if the shared library % of the unit are older than the unit file itself. unit_u_recompile_obj_and_asm_older=10032_U_מהדר מחדש את ה היחידה. קבצי ה obj והasm ישנים יותר מקובץ ה PPU % When you use the \var{-vu} flag, the compiler warns if the assembler or % object file of the unit are older than the unit file itself. unit_u_recompile_obj_older_than_asm=10033_U_מהדר מחדש את היחידה. קובץ הobj ישן יותר מקובץ הasm % When you use the \var{-vu} flag, the compiler warns if the assembler % file of the unit is older than the object file of the unit. unit_u_parsing_interface=10034_U_מפרש את חלק הממשק של $1 % When you use the \var{-vu} flag, the compiler warns that it starts % parsing the interface part of the unit unit_u_parsing_implementation=10035_U_מפרש את חלק הביצועי של $1 % When you use the \var{-vu} flag, the compiler warns that it starts % parsing the implementation part of the unit unit_u_second_load_unit=10036_U_טעינה שנייה של היחידה $1 % When you use the \var{-vu} flag, the compiler warns that it starts % recompiling a unit for the second time. This can happend with interdepend % units. unit_u_check_time=10037_U_בדיקת קובץ PPU $1 זמן $2 % When you use the \var{-vu} flag, the compiler show the filename and % date and time of the file which a recompile depends on ### The following two error msgs is currently disabled. #unit_h_cond_not_set_in_last_compile=10038_H_התנאים של $1 לא הוגדרו בהתחלת הריצה בהידור האחרון של $2 #% when recompilation of an unit is required the compiler will check that #% the same conditionals are set for the recompiliation. The compiler has #% found a conditional that currently is defined, but was not used the last #% time the unit was compiled. #unit_h_cond_set_in_last_compile=10039_H_התנאים של $1 הוגדרו בהתחלת הריצה בהידור האחרון של $2 #% when recompilation of an unit is required the compiler will check that #% the same conditionals are set for the recompiliation. The compiler has #% found a conditional that was used the last time the unit was compiled, but #% the conditional is currently not defined. unit_w_cant_compile_unit_with_changed_incfile=10040_W_לא ניתן להדר את היחידה $1 למרות שקבצי הinclude שונו % A unit was found to have modified include files, but % some source files were not found, so recompilation is impossible. unit_u_source_modified=10041_U_הקובץ $1 חדש יותר מהקובץ PPU $2 % A modified source file for a compiler unit was found. unit_u_ppu_invalid_fpumode=10042_U_מנסה להשתמש ביחידה אשר הודרה למצב FPU שונה % Trying to compile code while using units which were not compiled with % the same floating point format mode. Either all code should be compiled % with FPU emulation on, or with FPU emulation off. unit_u_loading_interface_units=10043_U_טוען את חלק הממשק של היחידות מ $1 % When you use the \var{-vu} flag, the compiler warns that it starts % loading the units defined in the interface part of the unit. unit_u_loading_implementation_units=10044_U_טוען את החלק הביצועי של היחידות מ $1 % When you use the \var{-vu} flag, the compiler warns that it starts % loading the units defined in the implementation part of the unit. unit_u_interface_crc_changed=10045_U_חתימת ה CRC של חלק הממשק השתנה ביחידה $1 % When you use the \var{-vu} flag, the compiler warns that it the % CRC calculated for the interface has been changed after the implementation % has been parsed. unit_u_implementation_crc_changed=10046_U_חתימת הCRC של החלק הביצועי השתנה ליחידה $1 % When you use the \var{-vu} flag, the compiler warns that it the % CRC calculated has been changed after the implementation % has been parsed. unit_u_finished_compiling=10047_U_הסתיים הידור היחידה $1 % When you use the \var{-vu} flag, the compiler warns that it % has finished compiling the unit. unit_u_add_depend_to=10048_U_מוסיף את התלות של $1 ל$2 % When you use the \var{-vu} flag, the compiler warns that it % has added a dependency between the two units. unit_u_no_reload_is_caller=10049_U_אין קריאה מחודשת של הקובץ בשביל $1 % When you use the \var{-vu} flag, the compiler warns that it % has will not reload the unit because it is the unit that wants % to load this unit unit_u_no_reload_in_second_compile=10050_U_אין טעינה מחדש, בזמן הידור שני של היחידה $1 % When you use the \var{-vu} flag, the compiler warns that it % has will not reload the unit because it is already in a second recompile unit_u_flag_for_reload=10051_U_דגל לטעינה מחודשת: $1 % When you use the \var{-vu} flag, the compiler warns that it % has to reload the unit unit_u_forced_reload=10052_U_כופה על טעינה מחודשת % When you use the \var{-vu} flag, the compiler warns that it % has is reloading the unit because it was required unit_u_previous_state=10053_U_המצב הישן של $1: $2 % When you use the \var{-vu} flag, the compiler shows the % previous state of the unit unit_u_second_compile_unit=10054_U_נמצא כבר בתהליך הידור $1, מיישם הידור שני % When you use the \var{-vu} flag, the compiler warns that it starts % recompiling a unit for the second time. This can happend with interdepend % units. unit_u_loading_unit=10055_U_טוען את היחידה $1 % When you use the \var{-vu} flag, the compiler warns that it starts % loading the unit. unit_u_finished_loading_unit=10056_U_מסיים לטעון את היחידה $1 % When you use the \var{-vu} flag, the compiler warns that it finished % loading the unit. unit_u_registering_new_unit=10057_U_רושם יחידה חדשה $1 % When you use the \var{-vu} flag, the compiler warns that it has % found a new unit and registers it in the internal lists. unit_u_reresolving_unit=10058_U_מחשב מחדש את היחידה $1 % When you use the \var{-vu} flag, the compiler warns that it % has to recalculate the internal data of the unit unit_u_skipping_reresolving_unit=10059_U_מדלג על טעינה מחודשת של היחידה $1, עדיין בזמן טעינת יחידות בשימוש % When you use the \var{-vu} flag, the compiler warns that it % skips to recalculate the internal data of the unit because there % is no data to recalculate % \end{description} # EndOfTeX # # Options # # 11041 is the last used one # unit_u_unload_resunit=10060_U_Unloading resource unit $1 (not needed) % When you use the \var{-vu} flag, the compiler warns that it is unloading the % resource handling unit, since no resources are used. unit_e_different_wpo_file=10061_E_Unit $1 was compiled using a different whole program optimization feedback input ($2, $3); recompile it without wpo or use the same wpo feedback input file for this compilation invocation % When a unit has been compiled using a particular whole program optimization (wpo) feedback file (\var{-FW} \var{-OW}), % this compiled version of the unit is specialised for that particular compilation scenario and cannot be used in % any other context. It has to be recompiled before you can use it in another program or with another wpo feedback input file. unit_u_indirect_crc_changed=10062_U_Indirect interface (objects/classes) CRC changed for unit $1 % When you use the \var{-vu} flag, the compiler warns that the % indirect CRC calculated for the unit (this is the CRC of all classes/objects/interfaces/$\ldots$ % in the interfaces of units directly or indirectly used by this unit in the interface) has been changed after the % implementation has been parsed. unit_u_ppu_invalid_memory_model=10063_U_PPU is compiled for another i8086 memory model % This unit file was compiled for a different i8086 memory model and % cannot be read. % \end{description} # EndOfTeX # # Options # # 11057 is the last used one # option_usage=11000_O_$1 [options] [options] # BeginOfTeX % % \section{Command-line handling errors} % This section lists errors that occur when the compiler is processing the % command line or handling the configuration files. % \begin{description} option_only_one_source_support=11001_W_תומך רק בקובץ מקור אחד בשורת הפקודה % You can specify only one source file on the command line. The first % one will be compiled, others will be ignored. This may indicate that % you forgot a \var{'-'} sign. option_def_only_for_os2=11002_W_ניתן ליצור את קובץ ה DEF רק לOS/2 % This option can only be specified when you're compiling for OS/2 option_no_nested_response_file=11003_E_אין תמיכה בקבצי תגובה מקוננים % you cannot nest response files with the \var{@file} command-line option. option_no_source_found=11004_F_לא צויין קובץ מקור בשורת הפקודה % The compiler expects a source file name on the command line. option_no_option_found=11005_N_לא צוינו אפשרויות בתוך קובץ ההגדרות $1 % The compiler didn't find any option in that config file. option_illegal_para=11006_E_פרמטר לא חוקי: $1 % You specified an unknown option. option_help_pages_para=11007_H_-? כותב דפי עזרה % When an unknown option is given, this message is diplayed. option_too_many_cfg_files=11008_F_יותר מידי קבצי הגדרות מקוננים % You can only nest up to 16 config files. option_unable_open_file=11009_F_לא ניתן לפתוח את הקובץ $1 % The option file cannot be found. option_reading_further_from=11010_D_קורא הגדרות נוספות מ $1 % Displayed when you have notes turned on, and the compiler switches % to another options file. option_target_is_already_set=11011_W_המטרה כבר הוגדרה ל: $1 % Displayed if more than one \var{-T} option is specified. option_no_shared_lib_under_dos=11012_W_DOS אינו תומך בספריות משותפות, חוזר לספריות סטטיות % If you specify \var{-CD} for the \dos platform, this message is displayed. % The compiler supports only static libraries under \dos option_too_many_ifdef=11013_F_IF(N)DEF רבים מידי % the \var{\#IF(N)DEF} statements in the options file are not balanced with % the \var{\#ENDIF} statements. option_too_many_endif=11014_F_ENDIF רבים מידי % the \var{\#IF(N)DEF} statements in the options file are not balanced with % the \var{\#ENDIF} statements. option_too_less_endif=11015_F_תנאי פתוח בסוף הקובץ % the \var{\#IF(N)DEF} statements in the options file are not balanced with % the \var{\#ENDIF} statements. option_no_debug_support=11016_W_מידע ניפוי שגיאות אינו נתמך בסוג קובץ הריצה המבוקש % It is possible to have a compiler executable that doesn't support % the generation of debugging info. If you use such an executable with the % \var{-g} switch, this warning will be displayed. option_no_debug_support_recompile_fpc=11017_H_נסה להדר מחדש עם המתג -dGDB % It is possible to have a compiler executable that doesn't support % the generation of debugging info. If you use such an executable with the % \var{-g} switch, this warning will be displayed. option_obsolete_switch=11018_W_אתה משתמש במתג המיושן $1 % this warns you when you use a switch that is not needed/supported anymore. % It is recommended that you remove the switch to overcome problems in the % future, when the switch meaning may change. option_obsolete_switch_use_new=11019_W_אתה משתמש במתג המיושן $1, השתמש במתג $2 במקום % this warns you when you use a switch that is not supported anymore. You % must now use the second switch instead. % It is recommended that you change the switch to overcome problems in the % future, when the switch meaning may change. option_switch_bin_to_src_assembler=11020_N_מעביר את האוסף למצב ברירת מחדל של כתיבת מאסף % this notifies you that the assembler has been changed because you used the % -a switch which can't be used with a binary assembler writer. option_incompatible_asm=11021_W_התוכן הנבחר של הassembler "$1" אינו מתאים ל "$2" option_asm_forced=11022_W_התוכן של המאסף "$1" לא מסוגל ליצור קבצי אובייקט, משתמש במאסף ברירת המחדל במקום % The assembler output selected can not generate % object files with the correct format. Therefore, the % default assembler for this target is used instead. option_using_file=11026_T_קורא אפשרויות מהקובץ $1 % Options are also read from this file option_using_env=11027_T_קורא אפשרויות מהסביבה $1 % Options are also read from this environment string option_handling_option=11028_D_מטפל באפשרות "$1" % Debug info that an option is found and will be handled option_help_press_enter=11029__*** לחץ על enter *** % Message shown when help is shown page per page. When pressing the ENTER % Key, the next page of help is shown. If you press q and then ENTER, the % compiler exits. option_start_reading_configfile=11030_H_מתחיל בקריאת קובץ ההגדרות $1 % Starting of config file parsing. option_end_reading_configfile=11031_H_סיום קריאת קובץ ההגדרות $1 % End of config file parsing. option_interpreting_option=11032_D_מפרש את האפשרות "$1" % The compiler is interpreting an option option_interpreting_firstpass_option=11036_D_מפרש את המעבר הראשון על האפשרות "$1" % The compiler is interpreting an option for the first time. option_interpreting_file_option=11033_D_מפרש את הגדרת הקובץ "$1" % The compiler is interpreting an option which it read from the configuration file. option_read_config_file=11034_D_קורא את קובץ ההגדרות "$1" % The compiler is starting to read the configuration file. option_found_file=11035_D_נמצא קובץ מקור בשם "$1" % Additional infos about options, displayed % when you have debug option turned on. option_code_page_not_available=11039_E_קוד דף לא ידוע % An unknown codepage for the source files was requested. % The compiler is compiled with support for several codepages built-in. % The requested codepage is not in that list. You will need to recompile % the compiler with support for the codepage you need. option_config_is_dir=11040_F_נמצאה ספרייה במקום קובץ ההגדרות $1 % Directories can not be used as configuration files. option_confict_asm_debug=11041_W_סוג הפלט של המאסף שנבחר "$1" אינו יכול ליצור מידע עבור ניפוי שגיאות. מבטל ניפוי שגיאות % The assembler output selected can not generate % debugging information, debugging option is therefore disabled. %\end{description} # EndOfTeX # # Logo (option -l) # option_ppc386_deprecated=11042_W_Use of ppc386.cfg is deprecated, please use fpc.cfg instead % Using ppc386.cfg is still supported for historical reasons, however, for a multiplatform % system the naming makes no sense anymore. Please continue to use fpc.cfg instead. option_else_without_if=11043_F_In options file $1 at line $2 #ELSE directive without #IF(N)DEF found % An \var{\#ELSE} statement was found in the options file without a matching \var{\#IF(N)DEF} statement. option_unsupported_target=11044_F_Option "$1" is not, or not yet, supported on the current target platform % Not all options are supported or implemented for all target platforms. This message informs you that a chosen % option is incompatible with the currently selected target platform. option_unsupported_target_for_feature=11045_F_The feature "$1" is not, or not yet, supported on the selected target platform % Not all features are supported or implemented for all target platforms. This message informs you that a chosen % feature is incompatible with the currently selected target platform. option_dwarf_smart_linking=11046_N_DWARF debug information cannot be used with smart linking on this target, switching to static linking % Smart linking is currently incompatible with DWARF debug information on most % platforms, so smart linking is disabled in such cases. option_ignored_target=11047_W_Option "$1" is ignored for the current target platform. % Not all options are supported or implemented for all target platforms. This message informs you that a chosen % option is ignored for the currently selected target platform. option_debug_external_unsupported=11048_W_Disabling external debug information because it is unsupported for the selected target/debug format combination. % Not all debug formats can be stored in an external file on all platforms. In particular, on % Mac OS X only DWARF debug information can be stored externally. option_dwarf_smartlink_creation=11049_N_DWARF debug information cannot be used with smart linking with external assembler, disabling static library creation. % Smart linking is currently incompatble with DWARF debug information on most % platforms, so smart linking is disabled in such cases. option_invalid_macosx_deployment_target=11050_E_Invalid value for MACOSX_DEPLOYMENT_TARGET environment variable: $1 option_invalid_iphoneos_deployment_target=11051_E_Invalid value for IPHONEOS_DEPLOYMENT_TARGET environment variable: $1 % On Mac OS X, the MACOSX\_DEPLOYMENT\_TARGET/IPHONEOS\_DEPLOYMENT\_TARGET environment variable can be % used to set the default target OS version. In case of Mac OS X, it has to be of the format % XY.Z or XY.Z.AB with X, Y,Z , A and B all digits from 0-9. % In case of iOS, it has to be X.Z.A, where X, Z and A can all be either 1 or 2 % digits from 0-9. option_illegal_fpu_eabihf=11052_E_You must use one of the VFP FPU types when using the EABIHF ABI target % The EABIHF (VFP hardfloat) ABI target can only be used with VFP FPUs. option_w_unsupported_debug_format=11053_W_The selected debug format is not supported on the current target, not changing the current setting % Not all targets support all debug formats (in particular, Stabs is not supported on 64 bit targets). option_missing_arg=11054_E_argument to "$1" is missing % Displayed when parameter must be followed by an argument. option_malformed_para=11055_E_malformed parameter: $1 % Given argument is not valid for parameter. option_smart_link_requires_external_linker=11056_W_Smart linking requires external linker option_com_files_require_tiny_model=11057_E_Creating .COM files is not supported in the current memory model. Only the tiny memory model supports making .COM files. %\end{description} # EndOfTeX # # Whole program optimization # # 12019 is the last used one # # BeginOfTeX % % \section{Whole program optimization messages} % This section lists errors that occur when the compiler is performing % whole program optimization. % \begin{description} wpo_cant_find_file=12000_F_Cannot open whole program optimization feedback file "$1" % The compiler cannot open the specified feedback file with whole program optimization information. wpo_begin_processing=12001_D_Processing whole program optimization information in wpo feedback file "$1" % The compiler starts processing whole program optimization information found in the named file. wpo_end_processing=12002_D_Finished processing the whole program optimization information in wpo feedback file "$1" % The compiler has finished processing the whole program optimization information found in the named file. wpo_expected_section=12003_E_Expected section header, but got "$2" at line $1 of wpo feedback file % The compiler expected a section header in the whole program optimization file (starting with \%), % but did not find it. wpo_no_section_handler=12004_W_No handler registered for whole program optimization section "$2" at line $1 of wpo feedback file, ignoring % The compiler has no handler to deal with the mentioned whole program optimization information % section, and will therefore ignore it and skip to the next section. wpo_found_section=12005_D_Found whole program optimization section "$1" with information about "$2" % The compiler encountered a section with whole program optimization information, and according % to its handler this section contains information usable for the mentioned purpose. wpo_no_input_specified=12006_F_The selected whole program optimizations require a previously generated feedback file (use -Fw to specify) % The compiler needs information gathered during a previous compilation run to perform the selected % whole program optimizations. You can specify the location of the feedback file containing this % information using the -Fw switch. wpo_not_enough_info=12007_E_No collected information necessary to perform "$1" whole program optimization found % While you pointed the compiler to a file containing whole program optimization feedback, it % did not contain the information necessary to perform the selected optimizations. You most likely % have to recompile the program using the appropriate -OWxxx switch. wpo_no_output_specified=12008_F_Specify a whole program optimization feedback file to store the generated info in (using -FW) % You have to specify the feedback file in which the compiler has to store the whole program optimization % feedback that is generated during the compilation run. This can be done using the -FW switch. wpo_output_without_info_gen=12009_E_Not generating any whole program optimization information, yet a feedback file was specified (using -FW) % The compiler was instructed to store whole program optimization feedback into a file specified using -FW, % but not to actually generated any whole program optimization feedback. The classes of to be % generated information can be specified using -OWxxx. wpo_input_without_info_use=12010_E_Not performing any whole program optimizations, yet an input feedback file was specified (using -Fw) % The compiler was not instructed to perform any whole program optimizations (no -Owxxx parameters), % but nevertheless an input file with such feedback was specified (using -Fwyyy). Since this can % indicate that you forgot to specify an -Owxxx parameter, the compiler generates an error in this case. wpo_skipping_unnecessary_section=12011_D_Skipping whole program optimization section "$1", because not needed by the requested optimizations % The whole program optimization feedback file contains a section with information that is not % required by the selected whole program optimizations. wpo_duplicate_wpotype=12012_W_Overriding previously read information for "$1" from feedback input file using information in section "$2" % The feedback file contains multiple sections that provide the same class of information (e.g., % information about which virtual methods can be devirtualized). In this case, the information in last encountered % section is used. Turn on debugging output (-vd) to see which class of information is provided by each section. wpo_cannot_extract_live_symbol_info_strip=12013_E_Cannot extract symbol liveness information from program when stripping symbols, use -Xs- % Certain symbol liveness collectors extract the symbol information from the linked program. If the symbol information % is stripped (option -Xs), this is not possible. wpo_cannot_extract_live_symbol_info_no_link=12014_E_Cannot extract symbol liveness information from program when when not linking % Certain symbol liveness collectors extract the symbol information from the linked program. If the program is not % linked by the compiler, this is not possible. wpo_cannot_find_symbol_progs=12015_F_Cannot find "$1" or "$2" to extract symbol liveness information from linked program % Certain symbol liveness collectors need a helper program to extract the symbol information from the linked program. % This helper program is normally 'nm', which is part of the GNU binutils. wpo_error_reading_symbol_file=12016_E_Error during reading symbol liveness information produced by "$1" % An error occurred during the reading of the symbol liveness file that was generated using the 'nm' or 'objdump' program. The reason % can be that it was shorter than expected, or that its format was not understood. wpo_error_executing_symbol_prog=12017_F_Error executing "$1" (exitcode: $2) to extract symbol information from linked program % Certain symbol liveness collectors need a helper program to extract the symbol information from the linked program. % The helper program produced the reported error code when it was run on the linked program. wpo_symbol_live_info_needs_smart_linking=12018_E_Collection of symbol liveness information can only help when using smart linking, use -CX -XX % Whether or not a symbol is live is determined by looking whether it exists in the final linked program. % Without smart linking/dead code stripping, all symbols are always included, regardless of whether they are % actually used or not. So in that case all symbols will be seen as live, which makes this optimization ineffective. wpo_cant_create_feedback_file=12019_E_Cannot create specified whole program optimisation feedback file "$1" % The compiler is unable to create the file specified using the -FW parameter to store the whole program optimisation information. %\end{description} # EndOfTeX # # Logo (option -l) # option_logo=11023_[ Free Pascal Compiler version $FPCFULLVERSION [$FPCDATE] for $FPCCPU Copyright (c) 1993-2025 by Florian Klaempfl and others ] # # Info (option -i) # option_info=11024_[ Free Pascal Compiler version $FPCVERSION תאריך מהדר : $FPCDATE מהדר למעבד: $FPCCPU מערכות הפעלה נתמכות: $OSTARGETS הוראות מעבד נתמכות: $INSTRUCTIONSETS הוראות נתמכות של יחידת נקודה צפה: $FPUINSTRUCTIONSETS תמיכת המיטוב: $OPTIMIZATIONS התוכנה מוגשת תחת רישיון GNU General Public License למידע נוסף יש לקרוא את COPYING.v2 דיווח על תקלות (באגים), הצעות וכו': https://bugs.freepascal.org ] # # Help pages (option -? and -h) # # The first character on the line indicates who will display this # line, the current possibilities are : # * = every target # 3 = 80x86 targets # 6 = 680x0 targets # e = in extended debug mode only # P = PowerPC targets # S = Sparc targets # V = Virtual machine targets # The second character also indicates who will display this line, # (if the above character was TRUE) the current possibilities are : # * = everyone # g = with GDB info supported by the compiler # O = OS/2 # L = UNIX systems # The third character represents the indentation level. # option_help_pages=11025_[ **0*_הוסף את הסימן + לאחר אפשרות מתג בוליאני לאפשר את האפשרות, הוסף את הסימן - לבטל את האפשרות **1a_המהדר אינו מוחק את קובץ הassembler שנוצר **2al_רושם רשימה של שורות קוד מקור בקובץ הassembler **2an_רשימת מידע של צמתים בקובץ הassembler *L2ap_השתמש בצינורות במקום קבצי assembler זמניים **2ar_רשימה אודות רישום של הקצאה/שחרור בקובץ הassembler **2at_רשימה זמנית אודות הקצאה/שחרור בקובץ הassembler **1A_תסדירי פלט: **2Adefault_השתמש במאסף ברירת מחדל 3*2Aas_אסוף עם GNU AS 3*2Anasmcoff_קובץ COFF (Go32v2) בשימוש עם Nasm 3*2Anasmelf_קובץ ELF32 (Linux) בשימוש עם Nasm 3*2Anasmwin32_קובץ אובייקט Win32 בשימוש עם Nasm 3*2Anasmwdosx_קובץ אובייקט Win32/WDOSX בשימוש עם Nasm 3*2Awasm_קובץ obj בשימוש עם Wasm (Watcom) 3*2Anasmobj_קובץ obj בשימוש עם Nasm 3*2Amasm_קובץ obj בשימוש עם Masm (Microsoft) 3*2Atasm_קובץ obj בשימוש Tasm (Borland) 3*2Aelf_קובץ ELF32 (Linux) בשימוש כותב פנימי 3*2Acoff_קובץ OFF (Go32v2) בשימוש כותב פנימי 3*2Apecoff_קובץ pecoff (Win32) בשימוש כותב פנימי 4*2Aas_אסוף עם GNU AS 6*2Aas_קובץ-o Unix בשימוש GNU AS 6*2Agas_GNU Motorola assembler 6*2Amit_MIT Syntax (GAS ישן) 6*2Amot_Motorola assembler תקני A*2Aas_אסוף עם GNU AS P*2Aas_אסוף עם GNU AS S*2Aas_אסוף עם GNU AS **1b_ייצר מידע לדפדוף **2bl_ייצר מידע על סמלים מקומיים **1B_בנה את כל המודולים **1C_אפשרויות יצירת קוד: **2Cc_קובע מוסכמות הפעלה ברירת מחדל ל <ס> **2CD_צור גם ספרייה דינאמית (לא נתמך) **2Ce_מהדר עם הדמייה של opcodes השייכים לנקודה צפה **2Cf_בחר הוראות FPU לשימוש, ראה fpc -i לערכים אפשריים **2CF_דיוק נקודה עשרונית קבועה מינימלית (default, 32, 64) **2Cg_צור קוד PIC **2Ch_כמות של בתים ל מצבור (בין 1023 ו67107840) **2Ci_בדיקת IO **2Cn_השמט מצב קישור **2Co_בדוק גלישה של פעולות מספר שלם **2CO_בדוק עבור פעולות גלישה אפשרויות של מספר שלם **2Cp_בחר קבוצת הוראות, ראה fpc -i לערכים אפשריים **2CP=_הגדרות אריזה **3CPPACKSET=_ מסדר הקצאה: 0, 1 או DEFAULT או NORMAL, 2, 4 ו 8 **2Cr_בדיקת טווח **2CR_וודא קריאה תקינה למתודה **2Cs_קבע גודל מחסנית ל **2Ct_בדיקת מחסנית **2CX_צור גם ספרייה של קישור חכם **1d_מגדיר את הסמל **1D_יוצר קובץ DEF **2Dd_יוצר תאור ל **2Dv_יוצר גרסת DLL ל *O2Dw_ישום PM **1e_קובע נתיב לקובץ ריצה **1E_זהה ל -Cn **1fPIC_זהה ל -Cg **1F_קובע שם קבצים ומיקומים: **2Fa[,y]_קודם טוען את היחידות ו [y] ראשונות, לפני ניתוח שורת ה uses **2Fc_קובע קוד דף של קלט ל **2FC_קבע שם מהדר RC בינארי ל **2FD_קובע את הספרייה בה אפשר לחפש את כלי העזר של המהדר **2Fe_הפנה הודעות שגיאה ל **2Ff_הוסף את לנתיב המסגרת (רק ב Darwin) **2FE_הפנה פלט של exe/unit לנתיב **2Fi_מוסיף את לרשימת הנתיבים **2Fl_מוסיף את לרשימת הנתיבים של הספריה **2FL_משתמש ב כמקשר דינאמי **2Fm_טוען טבלת המרה של יוניקוד מהקובץ x>.txt> מספריית המהדר **2Fo_מוסיף את לרשינת הנתיבים של אובייקט **2Fr_טוען קובץ הודעות שגיאה **2FR_קבע מקשר לקובץ res ל **2Fu_מוסיף את לרשימת הנתיבים של יחידה **2FU_קובע את המיקום הפלט של היחידות ל ומשכתב את -FE *g1g_יוצר מידע לניפוי שגיאות *g2gc_יוצר בדיקות למצביעים *g2gh_השתמש ביחידה heaptrace (עבור דליפות זכרון/בעיות בניפוי שגיאות) *g2gl_השתמש ביחידת מידע של שורה להציג מידע נוסף לbacktraces *g2go_צור אפשרויות לניפוי שגיאות *g3godwarfsets_אפשר מידע לניהול מידע עבור ניפוי שגיאות של Dwarf (שובר את gdb < 6.5) *g2gp_משמר גודל שמות סמלי הstabs *g2gs_מייצר מידע לניפוי שגיאות stub *g2gt_לכלך משתנים מקומיים (לזיהוי מידע לא מאותחל) *g2gv_מייצר תוכנות עם יכולת מעקב של valgrind *g2gw_מייצר מידע לניפוי שגיאות לdwarf *g2gw2_מיצר מידע לניפוי שגיאות dwarf-2 *g2gw3_מיצר מידע לניפוי שגיאות dwarf-3 **1i_מידע **2iD_הצג תאריך המהדר **2iV_הצג גרסת המהדר **2iW_הצג גרסה מלאה של המהדר **2iSO_הצג מערכת הפעלה של המהדר **2iSP_הצג גרסת מעבד של המהדר **2iTO_הצג את המטרה של מערכת ההפעלה **2iTP_הצג את המטרה של המעבד **1I_הוסף את לרשימת הנתיבים להוספה **1k_העבר את למקשר **1l_כתוב סמליל **1M_הגדר מצב שפה ל **2Mfpc_דיאלקט של Free Pascal (ברירת מחדל) **2Mobjfpc_אפשר כמה תוספות של Delphi 2 **2Mdelphi_מנסה להיות תואם Delphi **2Mtp_מנסה להיות תואם ל TP/BP 7.0 **2Mmacpas_מנסה להיות תואם ללהג של Macintosh Pascal **1n_אל תקרא את קובץ הגדרות ברירת המחדל **1o_שנה את שם קובץ הריצה שהתקבל ל **1O_מיטובים: **2O-_בטל מיטוב **2O1_מיטוב רמה 1 (מהיר וטוב לניפוי שגיאות) **2O2_מיטוב רמה 2 (-O1 + מיטוב מהיר) **2O3_מיטוב רמה 3 (-O2 + מיטוב איטי) **2Oa=_קבע יישור **2Oo[NO]_ע"מ לאפשר או לאפשר מיטובים, ראה fpc -i לאפשרויות **2Op_לקביעת מיטוב למעבד נבחר, ראה fpc -i לאפשרויות **2Os_צור קוד קטן **1pg_צור קוד פרופיל עבור gprof (מגדיר את FPC_PROFILE) **1R_סגנון קריאת האסף: **2Rdefault_השתמש במאסף ברירת מחדל 3*2Ratt_קרא סגנון מקשר של AT&T 3*2Rintel_קרא סגנון מקשר של Intel 4*2Ratt_קרא סגנון מקשר של AT&T 4*2Rintel_קרא סגנון מקשר של Intel 8*2Ratt_קרא סגנון מקשר של AT&T 8*2Rintel_קרא סגנון מקשר של Intel 6*2RMOT_קרא סגנון מקשר של Motorola **1S_אפשרויות תחביר: **2S2_זהה ל -Mobjfpc **2Sc_תומך אופרטורים בסגנון C (*=, +=, /= ו -=) **2Sa_הוסף קוד טענת תנאי קביעה (assertion) **2Sd_זהה ל -Mdelphi **2Se_אפשרויות שגיאה. הינו השילוב הבא: **3*_ : המהדר עוצר לאחר שגיאות (ברירת מחדל היא 1) **3*_w : המהדר עוצר גם לאחר אזהרות **3*_n : המהדר עוצר לאחר הערות **3*_h : המהדר עוצר לאחר רמזים **2Sg_אפשר LABEL ו GOTO **2Sh_השתמש ב ansistrings **2Si_תמוך בסגנון C++ של INLINE **2Sk_טען את היחידה fpcylix **2SI_קבע סגנון ממשק ל **3SIcom_תואם ממשקי COM (ברירת מחדל) **3SIcorba_תואם ממשקי CORBA **2Sm_תמוך במקרו דומים לC (גלובליים) **2So_זהה ל -Mtp **2Ss_שם יוצר חייב להיות init (שם הורס חייב להיות done) **2Sx_אפשר מילות מפתח לexception (ברירת מחדל במצבי Delphi/ObjFPC) **1s_אל תקרא למאסף והמקשר **2sh_צור תסריט לקישור במארח **2st_צור תסריט לקישור במטרה **2sr_דלג על רישום הקצאת מופע (השתמש בייחד עם -alr) **1T_מטרת מערכת ההפעלה: 3*2Temx_OS/2 בשימוש EMX ( בייחד עם הרחבת EMX/RSX) 3*2Tfreebsd_FreeBSD 3*2Tgo32v2_גרסה 2 של הרחבת DJ Delorie DOS 3*2Tlinux_Linux 3*2Tnetbsd_NetBSD 3*2Tnetware_Novell Netware Module (clib) 3*2Tnetwlibc_Novell Netware Module (libc) 3*2Topenbsd_OpenBSD 3*2Tos2_OS/2 / eComStation 3*2Twatcom_Watcom תואם הרחבת DOS 3*2Twdosx_WDOSX הרחבת DOS 3*2Twin32_Windows 32 סיביות 3*2Twince_Windows CE 4*2Tlinux_Linux 6*2Tamiga_Commodore Amiga 6*2Tatari_Atari ST/STe/TT 6*2Tlinux_Linux/m68k 6*2Tmacos_Macintosh m68k (לא נתמך) 6*2Tpalmos_PalmOS A*2Tlinux_Linux A*2Twince_Windows CE P*2Tamiga_AmigaOS על PowerPC P*2Tdarwin_Darwin ו Mac OS X על PowerPC P*2Tlinux_Linux על PowerPC P*2Tmacos_Mac OS (קלאסי) על PowerPC P*2Tmorphos_MorphOS S*2Tlinux_Linux **1u_מסיר את ההגדרה של הסמל **1U_הגדרות יחידה: **2Un_אל תבדוק את שם היחידה **2Ur_צור קבצי שחרור של יחידות **2Us_הדר את יחידת הsystem **1v_תהיה מפורט יותר. הינו שילוב של התווים הבאים: **2*_e : הצג הודעות שגיאה (ברירת מחדל) **2*_0 : אל תציג כלום (למעט הודעות שגיאה) **2*_w : הצג אזהרות **2*_u : הצג מידע על יחידה **2*_n : הצג הערות **2*_t : הצג קבצים שהיו בשימוש **2*_h : הצג רמזים **2*_c : הצג תנאים **2*_i : הצג מידע כללי **2*_d : הצג מידע לנפוי שגיאות **2*_l : הצג מספרי שורות **2*_r : מצב תואם Rhide/GCC **2*_a : הצג הכול **2*_x : הצג מידע על קובץ הריצה (רק בWin32) **2*_b : כתוב הודעות עם שמות קבצים ונתיבים מלאים **2*_v : כתוב את הקובץ fpcdebug.txt עם הרבה מידע על ניפוי שגיאות **2*_p : כתוב את הקובץ tree.log עם ניתוח עץ 3*1W_אפשרות מבוססת מטרה (מטרות) A*1W_אפשרות מבוססת מטרה (מטרות) P*1W_אפשרות מבוססת מטרה (מטרות) 3*2Wb_צור חבילה במקום ספרייה (Darwin) P*2Wb_צור חבילה במקום ספרייה (Darwin) p*2Wb_צור חבילה במקום ספרייה (Darwin) 3*2WB_צור תמונה הניתנת למיקום מחודש (Windows) A*2WB_צור תמונה הניתנת למיקום מחודש (Windows, Symbian) 3*2WC_מציין אפליקציה מסוג מסוף (EMX, OS/2, Windows) A*2WC_מציין אפליקציה מסוג מסוף (Windows) P*2WC_מציין אפליקציה מסוג מסוף (Classic Mac OS) 3*2WD_השתמש ב DEFFILE לייצא פנקציות של DLL או EXE (Windows) A*2WD_השתמש ב DEFFILE לייצא פנקציות של DLL או EXE (Windows) 3*2WF_מציין אפליקציה מסוג מסך מלא (EMX, OS/2) 3*2WG_מציין אפליקציה מסוג גרפי (EMX, OS/2, Windows) A*2WG_מציין אפליקציה מסוג גרפי (Windows) P*2WG_מציין אפליקציה מסוג גרפי (Classic Mac OS) 3*2WN_אל תצור קוד משנה מיקום, נדרש עבור ניפוי שגיאות (Windows) A*2WN_אל תצור קוד משנה מיקום, נדרש עבור ניפוי שגיאות (Windows) 3*2WR_תיצור קוד משנה מיקום (Windows) A*2WR_תיצור קוד משנה מיקום (Windows) P*2WT_ציין אפליקציה מסוג כלי MPW (Classic Mac OS) **1X_הגדרות ריצה: **2Xc_העבר --shared/-dynamic למקשר (BeOS, Darwin, FreeBSD, Linux) **2Xd_אל תשתמש בנתיב חיפוש הספריות הסטנדרטיות (נדרש עבור הידור לארכיטקטורות אחרות) **2Xe_השתמש במקשר חיצוני **2XD_נסה לקשר יחידות בצורה דינאמית (מגדיר FPC_LINK_DYNAMIC) **2Xi_השתמש במקשר פנימי **2Xm_צור מפת קישורים **2XM_הגדר את השם של רוטינה ה'עיקרית' של התוכנה (ברירת מחדל הוא 'main') **2XP_צרף את השמות המגיעים עÝ התחילית מbinutils **2Xr_הגדר את נתיב חיפוש הספריות ל (נדרש עבור הידור לארכיטקטורות אחרות) (BeOS, Linux) **2XR_צרף את לכל נתיבי החיפוש של המקשר (BeOS, Darwin, FreeBSD, Linux, Mac OS, Solaris) **2Xs_נקה את כל הסמלים מקבצי ההרצה **2XS_נסה לקשר יחידות בצורה סטטית (ברירת מחדל, מגדיר FPC_LINK_STATIC) **2Xt_קשר עם ספריות סטטיות (מעביר -static למקשר) **2XX_תנסה לבצע smartlink ליחידות (מגדיר FPC_LINK_SMART) **1*_ **1?_הצג את עזרה זו **1h_הצג עזרה זו ללא לחכות ] # # The End... %%% parser_e_only_class_methods_via_class_ref=03053_E_רק מתודות מחלקה יכולות להיות מוגדרות בהתייחסות מחלקה % This error occurs in a situation like the following: % \begin{verbatim} % Type : % Tclass = Class of Tobject; % % Var C : TClass; % % begin % ... % C.free % \end{verbatim} % \var{Free} is not a class method and hence cannot be called with a class % reference. %%% parser_e_only_class_methods=03054_E_רק מתודת מחלקה יכולה לגשת למתודת מחלקה % This is related to the previous error. You cannot call a method of an object % from a inside a class method. The following code would produce this error: % \begin{verbatim} % class procedure tobject.x; % % begin % free % \end{verbatim} % Because free is a normal method of a class it cannot be called from a class % method. %%% parser_e_absolute_only_one_var=03095_E_absolute ניתן לשימוש רק עם משתנה אחת % You cannot specify more than one variable before the \var{absolute} directive. % Thus, the following construct will provide this error: % \begin{verbatim} % Var Z : Longint; % X,Y : Longint absolute Z; % \end{verbatim} % \item [ absolute can only be associated a var or const ] % The address of a \var{absolute} directive can only point to a variable or a % typed constant. Therefore, the following code will produce this error: % \begin{verbatim} % Procedure X; % % var p : longint absolute x; % \end{verbatim} % %%% parser_e_type_and_var_only_in_generics=03224_E_ניתן להשתמש ב VAR ו TYPE רק עם generics % The usage of VAR and TYPE to declare new types inside an object is allowed only inside % generics. %%% type_w_mixed_signed_unsigned=04035_W_עירבוב ביטויי סימנים וlongwords מספקים תוצאה של 64bit % If you divide (or calculate the modulus of) a signed expression by a longword (or vice versa), % or if you have overflow and/or range checking turned on and use an arithmetic % expression (+, -, *, div, mod) in which both signed numbers and longwords appear, % then everything has to be evaluated in 64bit which is slower than normal % 32bit arithmetic. You can avoid this by typecasting one operand so it % matches the result type of the other one. %%% type_w_signed_unsigned_always_false=04044_W_ההשוואה תמיד תחזיר ערך של false בגלל טווח הערכים % There is a comparison between an unsigned value and a signed constant which is % less than zero. Because of type promotion, the statement will always evaluate to % false. Exlicitly typecast the constant to the correct range to avoid this problem. %%% type_w_signed_unsigned_always_true=04045_W_ההשוואה תמיד תחזיר ערך של true בגלל טווח הערכים % There is a comparison between an unsigned value and a signed constant which is % less than zero. Because of type promotion, the statement will always evaluate to % true. Exlicitly typecast the constant to the correct range to avoid this problem.