{
    $Id$
    Copyright (c) 1998-2000 by Jonas Maebe, member of the Freepascal
      development team

    This unit contains the data flow analyzer and several helper procedures
    and functions.

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

 ****************************************************************************
}

{$ifDef TP}
  {$UnDef JumpAnal}
{$Endif TP}

Unit DAOpt386;

{$ifdef newOptimizations}
{$define foropt}
{$define replacereg}
{$define arithopt}
{$define foldarithops}
{$endif newOptimizations}

Interface

Uses
  GlobType,
  CObjects,Aasm,
  cpubase,cpuasm;

Type
  TRegArray = Array[R_EAX..R_BL] of TRegister;
  TRegSet = Set of R_EAX..R_BL;
  TRegInfo = Record
                NewRegsEncountered, OldRegsEncountered: TRegSet;
                RegsLoadedForRef: TRegSet;
                New2OldReg: TRegArray;
              End;

{possible actions on an operand: read, write or modify (= read & write)}
  TOpAction = (OpAct_Read, OpAct_Write, OpAct_Modify, OpAct_Unknown);

{*********************** Procedures and Functions ************************}

Procedure InsertLLItem(AsmL: PAasmOutput; prev, foll, new_one: PLinkedList_Item);

Function Reg32(Reg: TRegister): TRegister;
Function RefsEquivalent(Const R1, R2: TReference; Var RegInfo: TRegInfo; OpAct: TOpAction): Boolean;
Function RefsEqual(Const R1, R2: TReference): Boolean;
Function IsGP32Reg(Reg: TRegister): Boolean;
Function RegInRef(Reg: TRegister; Const Ref: TReference): Boolean;
Function RegInInstruction(Reg: TRegister; p1: Pai): Boolean;
{$ifdef newOptimizations}
Function RegInOp(Reg: TRegister; const o:toper): Boolean;
{$endif newOptimizations}
Function RegModifiedByInstruction(Reg: TRegister; p1: Pai): Boolean;

Function GetNextInstruction(Current: Pai; Var Next: Pai): Boolean;
Function GetLastInstruction(Current: Pai; Var Last: Pai): Boolean;
Procedure SkipHead(var P: Pai);

Procedure RemoveLastDeallocForFuncRes(asmL: PAasmOutput; p: pai);
Function regLoadedWithNewValue(reg: tregister; canDependOnPrevValue: boolean;
           hp: pai): boolean;
Procedure UpdateUsedRegs(Var UsedRegs: TRegSet; p: Pai);
Function RegsEquivalent(OldReg, NewReg: TRegister; Var RegInfo: TRegInfo; OpAct: TopAction): Boolean;
Function InstructionsEquivalent(p1, p2: Pai; Var RegInfo: TRegInfo): Boolean;
Function OpsEqual(const o1,o2:toper): Boolean;

Function DFAPass1(AsmL: PAasmOutput; BlockStart: Pai): Pai;
Function DFAPass2(
{$ifdef statedebug}
                   AsmL: PAasmOutPut;
{$endif statedebug}
                                      BlockStart, BlockEnd: Pai): Boolean;
Procedure ShutDownDFA;

Function FindLabel(L: PasmLabel; Var hp: Pai): Boolean;

{******************************* Constants *******************************}

Const

{Possible register content types}
  con_Unknown = 0;
  con_ref = 1;
  con_const = 2;

{********************************* Types *********************************}

type
{the possible states of a flag}
  TFlagContents = (F_Unknown, F_NotSet, F_Set);

  TContent = Packed Record
      {start and end of block instructions that defines the
       content of this register.}
               StartMod: pai;
      {starts at 0, gets increased everytime the register is written to}
               WState: Byte;
      {starts at 0, gets increased everytime the register is read from}
               RState: Byte;
      {how many instructions starting with StarMod does the block consist of}
               NrOfMods: Byte;
      {the type of the content of the register: unknown, memory, constant}
               Typ: Byte;
             End;

{Contents of the integer registers}
  TRegContent = Array[R_EAX..R_EDI] Of TContent;

{contents of the FPU registers}
  TRegFPUContent = Array[R_ST..R_ST7] Of TContent;

{$ifdef tempOpts}
{ linked list which allows searching/deleting based on value, no extra frills}
  PSearchLinkedListItem = ^TSearchLinkedListItem;
  TSearchLinkedListItem = object(TLinkedList_Item)
    constructor init;
    function equals(p: PSearchLinkedListItem): boolean; virtual;
  end;

  PSearchDoubleIntItem = ^TSearchDoubleInttem;
  TSearchDoubleIntItem = object(TLinkedList_Item)
    constructor init(_int1,_int2: longint);
    function equals(p: PSearchLinkedListItem): boolean; virtual;
   private
    int1, int2: longint;
  end;

  PSearchLinkedList = ^TSearchLinkedList;
  TSearchLinkedList = object(TLinkedList)
    function searchByValue(p: PSearchLinkedListItem): boolean;
    procedure removeByValue(p: PSearchLinkedListItem);
  end;
{$endif tempOpts}

{information record with the contents of every register. Every Pai object
 gets one of these assigned: a pointer to it is stored in the OptInfo field}
  TPaiProp = Record
               Regs: TRegContent;
{               FPURegs: TRegFPUContent;} {currently not yet used}
    { allocated Registers }
               UsedRegs: TRegSet;
    { status of the direction flag }
               DirFlag: TFlagContents;
{$ifdef tempOpts}
    { currently used temps }
               tempAllocs: PSearchLinkedList;
{$endif tempOpts}
    { can this instruction be removed? }
               CanBeRemoved: Boolean;
             End;

  PPaiProp = ^TPaiProp;

{$IfNDef TP}
  TPaiPropBlock = Array[1..250000] Of TPaiProp;
  PPaiPropBlock = ^TPaiPropBlock;
{$EndIf TP}

  TInstrSinceLastMod = Array[R_EAX..R_EDI] Of Byte;

  TLabelTableItem = Record
                      PaiObj: Pai;
{$IfDef JumpAnal}
                      InstrNr: Longint;
                      RefsFound: Word;
                      JmpsProcessed: Word
{$EndIf JumpAnal}
                    End;
{$IfDef tp}
  TLabelTable = Array[0..10000] Of TLabelTableItem;
{$Else tp}
  TLabelTable = Array[0..2500000] Of TLabelTableItem;
{$Endif tp}
  PLabelTable = ^TLabelTable;

{******************************* Variables *******************************}

Var
{the amount of PaiObjects in the current assembler list}
  NrOfPaiObjs: Longint;

{$IfNDef TP}
{Array which holds all TPaiProps}
  PaiPropBlock: PPaiPropBlock;
{$EndIf TP}

  LoLab, HiLab, LabDif: Longint;

  LTable: PLabelTable;

{*********************** End of Interface section ************************}


Implementation

Uses
  globals, systems, strings, verbose, hcodegen, symconst, tgeni386;

Type
  TRefCompare = function(const r1, r2: TReference): Boolean;

Var
 {How many instructions are between the current instruction and the last one
  that modified the register}
  NrOfInstrSinceLastMod: TInstrSinceLastMod;

{$ifdef tempOpts}
  constructor TSearchLinkedListItem.init;
  begin
  end;

  function TSearchLinkedListItem.equals(p: PSearchLinkedListItem): boolean;
  begin
    equals := false;
  end;

  constructor TSearchDoubleIntItem.init(_int1,_int2: longint);
  begin
    int1 := _int1;
    int2 := _int2;
  end;

  function TSearchDoubleIntItem.equals(p: PSearchLinkedListItem): boolean;
  begin
    equals := (TSearchDoubleIntItem(p).int1 = int1) and
              (TSearchDoubleIntItem(p).int2 = int2);
  end;

  function TSearchLinkedList.searchByValue(p: PSearchLinkedListItem): boolean;
  var temp: PSearchLinkedListItem;
  begin
    temp := first;
    while (temp <> last^.next) and
          not(temp^.equals(p)) do
      temp := temp^.next;
    searchByValue := temp <> last^.next;
  end;

  procedure TSearchLinkedList.removeByValue(p: PSearchLinkedListItem);
  begin
    temp := first;
    while (temp <> last^.next) and
          not(temp^.equals(p)) do
      temp := temp^.next;
    if temp <> last^.next then
      begin
        remove(temp);
        dispose(temp,done);
      end;
  end;

Procedure updateTempAllocs(Var UsedRegs: TRegSet; p: Pai);
{updates UsedRegs with the RegAlloc Information coming after P}
Begin
  Repeat
    While Assigned(p) And
          ((p^.typ in (SkipInstr - [ait_RegAlloc])) or
           ((p^.typ = ait_label) And
            Not(Pai_Label(p)^.l^.is_used))) Do
         p := Pai(p^.next);
    While Assigned(p) And
          (p^.typ=ait_RegAlloc) Do
      Begin
        if pairegalloc(p)^.allocation then
          UsedRegs := UsedRegs + [PaiRegAlloc(p)^.Reg]
        else
          UsedRegs := UsedRegs - [PaiRegAlloc(p)^.Reg];
        p := pai(p^.next);
      End;
  Until Not(Assigned(p)) Or
        (Not(p^.typ in SkipInstr) And
         Not((p^.typ = ait_label) And
            Not(Pai_Label(p)^.l^.is_used)));
End;

{$endif tempOpts}

{************************ Create the Label table ************************}

Function FindLoHiLabels(Var LowLabel, HighLabel, LabelDif: Longint; BlockStart: Pai): Pai;
{Walks through the paasmlist to find the lowest and highest label number}
Var LabelFound: Boolean;
    P, lastP: Pai;
Begin
  LabelFound := False;
  LowLabel := MaxLongint;
  HighLabel := 0;
  P := BlockStart;
  lastP := p;
  While Assigned(P) Do
    Begin
      If (Pai(p)^.typ = ait_label) Then
        If (Pai_Label(p)^.l^.is_used)
          Then
            Begin
              LabelFound := True;
              If (Pai_Label(p)^.l^.labelnr < LowLabel) Then
                LowLabel := Pai_Label(p)^.l^.labelnr;
              If (Pai_Label(p)^.l^.labelnr > HighLabel) Then
                HighLabel := Pai_Label(p)^.l^.labelnr;
            End;
      lastP := p;
      GetNextInstruction(p, p);
    End;
  if (lastP^.typ = ait_marker) and
     (pai_marker(lastP)^.kind = asmBlockStart) then
    FindLoHiLabels := lastP
  else FindLoHiLabels := nil;
  If LabelFound
    Then LabelDif := HighLabel+1-LowLabel
    Else LabelDif := 0;
End;

Function FindRegAlloc(Reg: TRegister; StartPai: Pai; alloc: boolean): Boolean;
{ Returns true if a ait_alloc object for Reg is found in the block of Pai's }
{ starting with StartPai and ending with the next "real" instruction        }
Begin
  FindRegAlloc := false;
  Repeat
    While Assigned(StartPai) And
          ((StartPai^.typ in (SkipInstr - [ait_regAlloc])) Or
           ((StartPai^.typ = ait_label) and
            Not(Pai_Label(StartPai)^.l^.Is_Used))) Do
      StartPai := Pai(StartPai^.Next);
    If Assigned(StartPai) And
       (StartPai^.typ = ait_regAlloc) and (PairegAlloc(StartPai)^.allocation = alloc) Then
      Begin
        if PairegAlloc(StartPai)^.Reg = Reg then
         begin
           FindRegAlloc:=true;
           break;
         end;
        StartPai := Pai(StartPai^.Next);
      End
    else
      break;
  Until false;
End;

Procedure RemoveLastDeallocForFuncRes(asmL: PAasmOutput; p: pai);

  Procedure DoRemoveLastDeallocForFuncRes(asmL: PAasmOutput; reg: TRegister);
  var
    hp2: pai;
  begin
    hp2 := p;
    repeat
      hp2 := pai(hp2^.previous);
      if assigned(hp2) and
         (hp2^.typ = ait_regalloc) and
         not(pairegalloc(hp2)^.allocation) and
         (pairegalloc(hp2)^.reg = reg) then
        begin
          asml^.remove(hp2);
          dispose(hp2,done);
          break;
        end;
    until not(assigned(hp2)) or
          regInInstruction(reg,hp2);
  end;

begin
  if assigned(procinfo^.returntype.def) then
    case procinfo^.returntype.def^.deftype of
      arraydef,recorddef,pointerdef,
         stringdef,enumdef,procdef,objectdef,errordef,
         filedef,setdef,procvardef,
         classrefdef,forwarddef:
        DoRemoveLastDeallocForFuncRes(asmL,R_EAX);
      orddef:
        if procinfo^.returntype.def^.size <> 0 then
          begin
            DoRemoveLastDeallocForFuncRes(asmL,R_EAX);
            { for int64/qword }
            if procinfo^.returntype.def^.size = 8 then
              DoRemoveLastDeallocForFuncRes(asmL,R_EDX);
          end;
    end;
end;

procedure getNoDeallocRegs(var regs: TRegSet);
var regCounter: TRegister;
begin
  regs := [];
  if assigned(procinfo^.returntype.def) then
    case procinfo^.returntype.def^.deftype of
      arraydef,recorddef,pointerdef,
         stringdef,enumdef,procdef,objectdef,errordef,
         filedef,setdef,procvardef,
         classrefdef,forwarddef:
       regs := [R_EAX];
      orddef:
        if procinfo^.returntype.def^.size <> 0 then
          begin
            regs := [R_EAX];
            { for int64/qword }
            if procinfo^.returntype.def^.size = 8 then
              regs := regs + [R_EDX];
          end;
    end;
  for regCounter := R_EAX to R_EBX do
    if not(regCounter in usableregs) then
      regs := regs + [regCounter];
end;

Procedure AddRegDeallocFor(asmL: paasmOutput; reg: TRegister; p: pai);
var hp1: pai;
    funcResRegs: TRegset;
    funcResReg: boolean;
begin
  if not(reg in usableregs) then
    exit;
  getNoDeallocRegs(funcResRegs);
  funcResRegs := funcResRegs - usableregs;
  funcResReg := reg in funcResRegs;
  hp1 := p;
  while not(funcResReg and
            (p^.typ = ait_instruction) and
            (paicpu(p)^.opcode = A_JMP) and
            (pasmlabel(paicpu(p)^.oper[0].sym) = aktexit2label)) and
        getLastInstruction(p, p) And
        not(regInInstruction(reg, p)) Do
    hp1 := p;
  { don't insert a dealloc for registers which contain the function result }
  { if they are followed by a jump to the exit label (for exit(...))       }
  if not(funcResReg) or
     not((hp1^.typ = ait_instruction) and
         (paicpu(hp1)^.opcode = A_JMP) and
         (pasmlabel(paicpu(hp1)^.oper[0].sym) = aktexit2label)) then
    begin
      p := new(paiRegAlloc, deAlloc(reg));
      insertLLItem(AsmL, hp1^.previous, hp1, p);
    end;
end;

Procedure BuildLabelTableAndFixRegAlloc(asmL: PAasmOutput; Var LabelTable: PLabelTable; LowLabel: Longint;
            Var LabelDif: Longint; BlockStart, BlockEnd: Pai);
{Builds a table with the locations of the labels in the paasmoutput.
 Also fixes some RegDeallocs like "# %eax released; push (%eax)"}
Var p, hp1, hp2, lastP: Pai;
    regCounter: TRegister;
    UsedRegs, noDeallocRegs: TRegSet;
Begin
  UsedRegs := [];
  If (LabelDif <> 0) Then
    Begin
{$IfDef TP}
      If (MaxAvail >= LabelDif*SizeOf(Pai))
        Then
          Begin
{$EndIf TP}
            GetMem(LabelTable, LabelDif*SizeOf(TLabelTableItem));
            FillChar(LabelTable^, LabelDif*SizeOf(TLabelTableItem), 0);
{$IfDef TP}
          End
        Else LabelDif := 0;
{$EndIf TP}
    End;
  p := BlockStart;
  lastP := p;
  While (P <> BlockEnd) Do
    Begin
      Case p^.typ Of
        ait_Label:
          If Pai_Label(p)^.l^.is_used Then
            LabelTable^[Pai_Label(p)^.l^.labelnr-LowLabel].PaiObj := p;
        ait_regAlloc:
          { ESI and EDI are (de)allocated manually, don't mess with them }
          if not(paiRegAlloc(p)^.Reg in [R_EDI,R_ESI]) then
            begin
              if PairegAlloc(p)^.Allocation then
                Begin
                  If Not(paiRegAlloc(p)^.Reg in UsedRegs) Then
                    UsedRegs := UsedRegs + [paiRegAlloc(p)^.Reg]
                  Else
                    addRegDeallocFor(asmL, paiRegAlloc(p)^.reg, p);
                End
              else
                begin
                  UsedRegs := UsedRegs - [paiRegAlloc(p)^.Reg];
                  hp1 := p;
                  hp2 := nil;
                  While Not(FindRegAlloc(paiRegAlloc(p)^.Reg, Pai(hp1^.Next),true)) And
                        GetNextInstruction(hp1, hp1) And
                        RegInInstruction(paiRegAlloc(p)^.Reg, hp1) Do
                    hp2 := hp1;
                  If hp2 <> nil Then
                    Begin
                      hp1 := Pai(p^.previous);
                      AsmL^.Remove(p);
                      InsertLLItem(AsmL, hp2, Pai(hp2^.Next), p);
                      p := hp1;
                    end;
                end;
            end;
      end;
      repeat
        lastP := p;
        P := Pai(P^.Next);
      until not(Assigned(p)) or
            not(p^.typ in (SkipInstr - [ait_regalloc]));
    End;
  { don't add deallocation for function result variable or for regvars}
  getNoDeallocRegs(noDeallocRegs);
  usedRegs := usedRegs - noDeallocRegs;
  for regCounter := R_EAX to R_EDI do
    if regCounter in usedRegs then
      addRegDeallocFor(asmL,regCounter,lastP);
End;

{************************ Search the Label table ************************}

Function FindLabel(L: PasmLabel; Var hp: Pai): Boolean;

{searches for the specified label starting from hp as long as the
 encountered instructions are labels, to be able to optimize constructs like

 jne l2              jmp l2
 jmp l3     and      l1:
 l1:                 l2:
 l2:}

Var TempP: Pai;

Begin
  TempP := hp;
  While Assigned(TempP) and
       (TempP^.typ In SkipInstr + [ait_label,ait_align]) Do
    If (TempP^.typ <> ait_Label) Or
       (pai_label(TempP)^.l <> L)
      Then GetNextInstruction(TempP, TempP)
      Else
        Begin
          hp := TempP;
          FindLabel := True;
          exit
        End;
  FindLabel := False;
End;

{************************ Some general functions ************************}

Function TCh2Reg(Ch: TInsChange): TRegister;
{converts a TChange variable to a TRegister}
Begin
  If (Ch <= Ch_REDI) Then
    TCh2Reg := TRegister(Byte(Ch))
  Else
    If (Ch <= Ch_WEDI) Then
      TCh2Reg := TRegister(Byte(Ch) - Byte(Ch_REDI))
    Else
      If (Ch <= Ch_RWEDI) Then
        TCh2Reg := TRegister(Byte(Ch) - Byte(Ch_WEDI))
      Else
        If (Ch <= Ch_MEDI) Then
          TCh2Reg := TRegister(Byte(Ch) - Byte(Ch_RWEDI))
        Else InternalError($db)
End;

Function Reg32(Reg: TRegister): TRegister;
{Returns the 32 bit component of Reg if it exists, otherwise Reg is returned}
Begin
  Reg32 := Reg;
  If (Reg >= R_AX)
    Then
      If (Reg <= R_DI)
        Then Reg32 := Reg16ToReg32(Reg)
        Else
          If (Reg <= R_BL)
            Then Reg32 := Reg8toReg32(Reg);
End;

{ inserts new_one between prev and foll }
Procedure InsertLLItem(AsmL: PAasmOutput; prev, foll, new_one: PLinkedList_Item);
Begin
  If Assigned(prev) Then
    If Assigned(foll) Then
      Begin
        If Assigned(new_one) Then
          Begin
            new_one^.previous := prev;
            new_one^.next := foll;
            prev^.next := new_one;
            foll^.previous := new_one;
            Pai(new_one)^.fileinfo := Pai(foll)^.fileinfo;
          End;
      End
    Else AsmL^.Concat(new_one)
  Else If Assigned(Foll) Then AsmL^.Insert(new_one)
End;

{********************* Compare parts of Pai objects *********************}

Function RegsSameSize(Reg1, Reg2: TRegister): Boolean;
{returns true if Reg1 and Reg2 are of the same size (so if they're both
 8bit, 16bit or 32bit)}
Begin
  If (Reg1 <= R_EDI)
    Then RegsSameSize := (Reg2 <= R_EDI)
    Else
      If (Reg1 <= R_DI)
        Then RegsSameSize := (Reg2 in [R_AX..R_DI])
        Else
          If (Reg1 <= R_BL)
            Then RegsSameSize := (Reg2 in [R_AL..R_BL])
            Else RegsSameSize := False
End;

Procedure AddReg2RegInfo(OldReg, NewReg: TRegister; Var RegInfo: TRegInfo);
{updates the ???RegsEncountered and ???2???Reg fields of RegInfo. Assumes that
 OldReg and NewReg have the same size (has to be chcked in advance with
 RegsSameSize) and that neither equals R_NO}
Begin
  With RegInfo Do
    Begin
      NewRegsEncountered := NewRegsEncountered + [NewReg];
      OldRegsEncountered := OldRegsEncountered + [OldReg];
      New2OldReg[NewReg] := OldReg;
      Case OldReg Of
        R_EAX..R_EDI:
          Begin
            NewRegsEncountered := NewRegsEncountered + [Reg32toReg16(NewReg)];
            OldRegsEncountered := OldRegsEncountered + [Reg32toReg16(OldReg)];
            New2OldReg[Reg32toReg16(NewReg)] := Reg32toReg16(OldReg);
            If (NewReg in [R_EAX..R_EBX]) And
               (OldReg in [R_EAX..R_EBX]) Then
              Begin
                NewRegsEncountered := NewRegsEncountered + [Reg32toReg8(NewReg)];
                OldRegsEncountered := OldRegsEncountered + [Reg32toReg8(OldReg)];
                New2OldReg[Reg32toReg8(NewReg)] := Reg32toReg8(OldReg);
              End;
          End;
        R_AX..R_DI:
          Begin
            NewRegsEncountered := NewRegsEncountered + [Reg16toReg32(NewReg)];
            OldRegsEncountered := OldRegsEncountered + [Reg16toReg32(OldReg)];
            New2OldReg[Reg16toReg32(NewReg)] := Reg16toReg32(OldReg);
            If (NewReg in [R_AX..R_BX]) And
               (OldReg in [R_AX..R_BX]) Then
              Begin
                NewRegsEncountered := NewRegsEncountered + [Reg16toReg8(NewReg)];
                OldRegsEncountered := OldRegsEncountered + [Reg16toReg8(OldReg)];
                New2OldReg[Reg16toReg8(NewReg)] := Reg16toReg8(OldReg);
              End;
          End;
        R_AL..R_BL:
          Begin
            NewRegsEncountered := NewRegsEncountered + [Reg8toReg32(NewReg)]
                               + [Reg8toReg16(NewReg)];
            OldRegsEncountered := OldRegsEncountered + [Reg8toReg32(OldReg)]
                               + [Reg8toReg16(OldReg)];
            New2OldReg[Reg8toReg32(NewReg)] := Reg8toReg32(OldReg);
          End;
      End;
    End;
End;

Procedure AddOp2RegInfo(const o:Toper; Var RegInfo: TRegInfo);
Begin
  Case o.typ Of
    Top_Reg:
      If (o.reg <> R_NO) Then
        AddReg2RegInfo(o.reg, o.reg, RegInfo);
    Top_Ref:
      Begin
        If o.ref^.base <> R_NO Then
          AddReg2RegInfo(o.ref^.base, o.ref^.base, RegInfo);
        If o.ref^.index <> R_NO Then
          AddReg2RegInfo(o.ref^.index, o.ref^.index, RegInfo);
      End;
  End;
End;


Function RegsEquivalent(OldReg, NewReg: TRegister; Var RegInfo: TRegInfo; OPAct: TOpAction): Boolean;
Begin
  If Not((OldReg = R_NO) Or (NewReg = R_NO)) Then
    If RegsSameSize(OldReg, NewReg) Then
      With RegInfo Do
{here we always check for the 32 bit component, because it is possible that
 the 8 bit component has not been set, event though NewReg already has been
 processed. This happens if it has been compared with a register that doesn't
 have an 8 bit component (such as EDI). In that case the 8 bit component is
 still set to R_NO and the comparison in the Else-part will fail}
        If (Reg32(OldReg) in OldRegsEncountered) Then
          If (Reg32(NewReg) in NewRegsEncountered) Then
            RegsEquivalent := (OldReg = New2OldReg[NewReg])

 { If we haven't encountered the new register yet, but we have encountered the
   old one already, the new one can only be correct if it's being written to
   (and consequently the old one is also being written to), otherwise

   movl -8(%ebp), %eax        and         movl -8(%ebp), %eax
   movl (%eax), %eax                      movl (%edx), %edx

   are considered equivalent}

          Else
            If (OpAct = OpAct_Write) Then
              Begin
                AddReg2RegInfo(OldReg, NewReg, RegInfo);
                RegsEquivalent := True
              End
            Else Regsequivalent := False
        Else
          If Not(Reg32(NewReg) in NewRegsEncountered) Then
            Begin
              AddReg2RegInfo(OldReg, NewReg, RegInfo);
              RegsEquivalent := True
            End
          Else RegsEquivalent := False
    Else RegsEquivalent := False
  Else RegsEquivalent := OldReg = NewReg
End;

Function RefsEquivalent(Const R1, R2: TReference; var RegInfo: TRegInfo; OpAct: TOpAction): Boolean;
Begin
  If R1.is_immediate Then
    RefsEquivalent := R2.is_immediate and (R1.Offset = R2.Offset)
  Else
    RefsEquivalent := (R1.Offset+R1.OffsetFixup = R2.Offset+R2.OffsetFixup) And
                      RegsEquivalent(R1.Base, R2.Base, RegInfo, OpAct) And
                      RegsEquivalent(R1.Index, R2.Index, RegInfo, OpAct) And
                      (R1.Segment = R2.Segment) And (R1.ScaleFactor = R2.ScaleFactor) And
                      (R1.Symbol = R2.Symbol);
End;


Function RefsEqual(Const R1, R2: TReference): Boolean;
Begin
  If R1.is_immediate Then
    RefsEqual := R2.is_immediate and (R1.Offset = R2.Offset)
  Else
    RefsEqual := (R1.Offset+R1.OffsetFixup = R2.Offset+R2.OffsetFixup) And
                 (R1.Segment = R2.Segment) And (R1.Base = R2.Base) And
                 (R1.Index = R2.Index) And (R1.ScaleFactor = R2.ScaleFactor) And
                 (R1.Symbol=R2.Symbol);
End;

Function IsGP32Reg(Reg: TRegister): Boolean;
{Checks if the register is a 32 bit general purpose register}
Begin
  If (Reg >= R_EAX) and (Reg <= R_EBX)
    Then IsGP32Reg := True
    Else IsGP32reg := False
End;

Function RegInRef(Reg: TRegister; Const Ref: TReference): Boolean;
Begin {checks whether Ref contains a reference to Reg}
  Reg := Reg32(Reg);
  RegInRef := (Ref.Base = Reg) Or (Ref.Index = Reg)
End;

Function RegInInstruction(Reg: TRegister; p1: Pai): Boolean;
{checks if Reg is used by the instruction p1}
Var Counter: Longint;
    TmpResult: Boolean;
Begin
  TmpResult := False;
  If (Pai(p1)^.typ = ait_instruction) Then
    Begin
      Reg := Reg32(Reg);
      Counter := 0;
      Repeat
        Case Paicpu(p1)^.oper[Counter].typ Of
          Top_Reg: TmpResult := Reg = Reg32(Paicpu(p1)^.oper[Counter].reg);
          Top_Ref: TmpResult := RegInRef(Reg, Paicpu(p1)^.oper[Counter].ref^);
        End;
        Inc(Counter)
      Until (Counter = 3) or TmpResult;
    End;
  RegInInstruction := TmpResult
End;

{$ifdef newOptimizations}
Function RegInOp(Reg: TRegister; const o:toper): Boolean;
Begin
  RegInOp := False;
  Case o.typ Of
    top_reg: RegInOp := Reg = o.reg;
    top_ref: RegInOp := (Reg = o.ref^.Base) Or
                        (Reg = o.ref^.Index);
  End;
End;
{$endif newOptimizations}
(*
Function RegModifiedByInstruction(Reg: TRegister; p1: Pai): Boolean;
{returns true if Reg is modified by the instruction p1. P1 is assumed to be
 of the type ait_instruction}
Var hp: Pai;
Begin
  If GetLastInstruction(p1, hp)
    Then
      RegModifiedByInstruction :=
        PPAiProp(p1^.OptInfo)^.Regs[Reg].WState <>
          PPAiProp(hp^.OptInfo)^.Regs[Reg].WState
    Else RegModifiedByInstruction := True;
End;
*)

Function RegModifiedByInstruction(Reg: TRegister; p1: Pai): Boolean;
Var InstrProp: TInsProp;
    TmpResult: Boolean;
    Cnt: Byte;
Begin
  TmpResult := False;
  Reg := Reg32(Reg);
  If (p1^.typ = ait_instruction) Then
    Case paicpu(p1)^.opcode of
      A_IMUL:
        With paicpu(p1)^ Do
          TmpResult :=
            ((ops = 1) and (reg = R_EAX)) or
            ((ops = 2) and (Reg32(oper[1].reg) = reg)) or
            ((ops = 3) and (Reg32(oper[2].reg) = reg));
      A_DIV, A_IDIV, A_MUL:
        With paicpu(p1)^ Do
          TmpResult :=
            (Reg = R_EAX) or
            (Reg = R_EDX);
      Else
        Begin
          Cnt := 1;
          InstrProp := InsProp[paicpu(p1)^.OpCode];
          While (Cnt <= MaxCh) And
                (InstrProp.Ch[Cnt] <> Ch_None) And
                Not(TmpResult) Do
            Begin
              Case InstrProp.Ch[Cnt] Of
                Ch_WEAX..Ch_MEDI:
                  TmpResult := Reg = TCh2Reg(InstrProp.Ch[Cnt]);
                Ch_RWOp1,Ch_WOp1{$ifdef arithopt},Ch_Mop1{$endif arithopt}:
                  TmpResult := (paicpu(p1)^.oper[0].typ = top_reg) and
                               (Reg32(paicpu(p1)^.oper[0].reg) = reg);
                Ch_RWOp2,Ch_WOp2{$ifdef arithopt},Ch_Mop2{$endif arithopt}:
                  TmpResult := (paicpu(p1)^.oper[1].typ = top_reg) and
                               (Reg32(paicpu(p1)^.oper[1].reg) = reg);
                Ch_RWOp3,Ch_WOp3{$ifdef arithopt},Ch_Mop3{$endif arithopt}:
                  TmpResult := (paicpu(p1)^.oper[2].typ = top_reg) and
                               (Reg32(paicpu(p1)^.oper[2].reg) = reg);
                Ch_FPU: TmpResult := Reg in [R_ST..R_ST7,R_MM0..R_MM7];
                Ch_ALL: TmpResult := true;
              End;
              Inc(Cnt)
            End
        End
    End;
  RegModifiedByInstruction := TmpResult
End;

{********************* GetNext and GetLastInstruction *********************}
Function GetNextInstruction(Current: Pai; Var Next: Pai): Boolean;
{ skips ait_regalloc, ait_regdealloc and ait_stab* objects and puts the }
{ next pai object in Next. Returns false if there isn't any             }
Begin
  Repeat
    If (Current^.typ = ait_marker) And
       (Pai_Marker(Current)^.Kind = AsmBlockStart) Then
      Begin
        GetNextInstruction := False;
        Next := Nil;
        Exit
      End;
    Current := Pai(Current^.Next);
    While Assigned(Current) And
           ((Current^.typ In SkipInstr) or
            ((Current^.typ = ait_label) And
             Not(Pai_Label(Current)^.l^.is_used))) Do
      Current := Pai(Current^.Next);
    If Assigned(Current) And
       (Current^.typ = ait_Marker) And
       (Pai_Marker(Current)^.Kind = NoPropInfoStart) Then
      Begin
        While Assigned(Current) And
              ((Current^.typ <> ait_Marker) Or
               (Pai_Marker(Current)^.Kind <> NoPropInfoEnd)) Do
          Current := Pai(Current^.Next);
      End;
  Until Not(Assigned(Current)) Or
        (Current^.typ <> ait_Marker) Or
        (Pai_Marker(Current)^.Kind <> NoPropInfoEnd);
  Next := Current;
  If Assigned(Current) And
     Not((Current^.typ In SkipInstr) or
         ((Current^.typ = ait_label) And
          Not(Pai_Label(Current)^.l^.is_used)))
    Then
      GetNextInstruction :=
         not((current^.typ = ait_marker) and
             (pai_marker(current)^.kind = asmBlockStart))
    Else
      Begin
        GetNextInstruction := False;
        Next := nil;
      End;
End;

Function GetLastInstruction(Current: Pai; Var Last: Pai): Boolean;
{skips the ait-types in SkipInstr puts the previous pai object in
 Last. Returns false if there isn't any}
Begin
  Repeat
    Current := Pai(Current^.previous);
    While Assigned(Current) And
          (((Current^.typ = ait_Marker) And
            Not(Pai_Marker(Current)^.Kind in [AsmBlockEnd,NoPropInfoEnd])) or
           (Current^.typ In SkipInstr) or
           ((Current^.typ = ait_label) And
             Not(Pai_Label(Current)^.l^.is_used))) Do
      Current := Pai(Current^.previous);
    If Assigned(Current) And
       (Current^.typ = ait_Marker) And
       (Pai_Marker(Current)^.Kind = NoPropInfoEnd) Then
      Begin
        While Assigned(Current) And
              ((Current^.typ <> ait_Marker) Or
               (Pai_Marker(Current)^.Kind <> NoPropInfoStart)) Do
          Current := Pai(Current^.previous);
      End;
  Until Not(Assigned(Current)) Or
        (Current^.typ <> ait_Marker) Or
        (Pai_Marker(Current)^.Kind <> NoPropInfoStart);
  If Not(Assigned(Current)) or
     (Current^.typ In SkipInstr) or
     ((Current^.typ = ait_label) And
      Not(Pai_Label(Current)^.l^.is_used)) or
     ((Current^.typ = ait_Marker) And
      (Pai_Marker(Current)^.Kind = AsmBlockEnd))
    Then
      Begin
        Last := nil;
        GetLastInstruction := False
      End
    Else
      Begin
        Last := Current;
        GetLastInstruction := True;
      End;
End;

Procedure SkipHead(var P: Pai);
Var OldP: Pai;
Begin
  Repeat
    OldP := P;
    If (P^.typ in SkipInstr) Or
       ((P^.typ = ait_marker) And
        (Pai_Marker(P)^.Kind = AsmBlockEnd)) Then
      GetNextInstruction(P, P)
    Else If ((P^.Typ = Ait_Marker) And
        (Pai_Marker(P)^.Kind = NoPropInfoStart)) Then
   {a marker of the NoPropInfoStart can't be the first instruction of a
    paasmoutput list}
      GetNextInstruction(Pai(P^.Previous),P);
{    If (P^.Typ = Ait_Marker) And
       (Pai_Marker(P)^.Kind = AsmBlockStart) Then
      Begin
        P := Pai(P^.Next);
        While (P^.typ <> Ait_Marker) Or
              (Pai_Marker(P)^.Kind <> AsmBlockEnd) Do
          P := Pai(P^.Next)
      End;}
    Until P = OldP
End;
{******************* The Data Flow Analyzer functions ********************}

function regLoadedWithNewValue(reg: tregister; canDependOnPrevValue: boolean;
           hp: pai): boolean;
{ assumes reg is a 32bit register }
var p: paicpu;
begin
  p := paicpu(hp);
  regLoadedWithNewValue :=
    assigned(hp) and
    (hp^.typ = ait_instruction) and
    (((p^.opcode = A_MOV) or
      (p^.opcode = A_MOVZX) or
      (p^.opcode = A_MOVSX) or
      (p^.opcode = A_LEA)) and
     (p^.oper[1].typ = top_reg) and
     (Reg32(p^.oper[1].reg) = reg) and
     (canDependOnPrevValue or
      (p^.oper[0].typ <> top_ref) or
      not regInRef(reg,p^.oper[0].ref^)) or
     ((p^.opcode = A_POP) and
      (Reg32(p^.oper[0].reg) = reg)));
end;

Procedure UpdateUsedRegs(Var UsedRegs: TRegSet; p: Pai);
{updates UsedRegs with the RegAlloc Information coming after P}
Begin
  Repeat
    While Assigned(p) And
          ((p^.typ in (SkipInstr - [ait_RegAlloc])) or
           ((p^.typ = ait_label) And
            Not(Pai_Label(p)^.l^.is_used))) Do
         p := Pai(p^.next);
    While Assigned(p) And
          (p^.typ=ait_RegAlloc) Do
      Begin
        if pairegalloc(p)^.allocation then
          UsedRegs := UsedRegs + [PaiRegAlloc(p)^.Reg]
        else
          UsedRegs := UsedRegs - [PaiRegAlloc(p)^.Reg];
        p := pai(p^.next);
      End;
  Until Not(Assigned(p)) Or
        (Not(p^.typ in SkipInstr) And
         Not((p^.typ = ait_label) And
            Not(Pai_Label(p)^.l^.is_used)));
End;

Procedure IncState(Var S: Byte);
{Increases S by 1, wraps around at $ffff to 0 (so we won't get overflow
 errors}
Begin
  If (s <> $ff)
    Then Inc(s)
    Else s := 0
End;

Function RegInSequence(Reg: TRegister; Const Content: TContent): Boolean;
{checks the whole sequence of Content (so StartMod and and the next NrOfMods
 Pai objects) to see whether Reg is used somewhere, without it being loaded
 with something else first}
Var p: Pai;
    Counter: Byte;
    TmpResult: Boolean;
    RegsChecked: TRegSet;
Begin
  RegsChecked := [];
  p := Content.StartMod;
  TmpResult := False;
  Counter := 1;
  While Not(TmpResult) And
        (Counter <= Content.NrOfMods) Do
    Begin
      If (p^.typ = ait_instruction) and
         ((Paicpu(p)^.opcode = A_MOV) or
          (Paicpu(p)^.opcode = A_MOVZX) or
          (Paicpu(p)^.opcode = A_MOVSX))
        Then
          Begin
            If (Paicpu(p)^.oper[0].typ = top_ref) Then
              With Paicpu(p)^.oper[0].ref^ Do
                If (Base = procinfo^.FramePointer) And
                   (Index = R_NO)
                  Then
                    Begin
                      RegsChecked := RegsChecked + [Reg32(Paicpu(p)^.oper[1].reg)];
                      If Reg = Reg32(Paicpu(p)^.oper[1].reg) Then
                        Break;
                    End
                  Else
                    Begin
                      If (Base = Reg) And
                         Not(Base In RegsChecked)
                        Then TmpResult := True;
                      If Not(TmpResult) And
                         (Index = Reg) And
                           Not(Index In RegsChecked)
                        Then TmpResult := True;
                    End
          End
        Else TmpResult := RegInInstruction(Reg, p);
      Inc(Counter);
      GetNextInstruction(p,p)
    End;
  RegInSequence := TmpResult
End;

Procedure DestroyReg(p1: PPaiProp; Reg: TRegister; doIncState:Boolean);
{Destroys the contents of the register Reg in the PPaiProp p1, as well as the
 contents of registers are loaded with a memory location based on Reg.
 doIncState is false when this register has to be destroyed not because
 it's contents are directly modified/overwritten, but because of an indirect
 action (ie. this register holds the contents of a variable and the value
 of the variable in memory is changed }
Var TmpWState, TmpRState: Byte;
    Counter: TRegister;
Begin
  Reg := Reg32(Reg);
  NrOfInstrSinceLastMod[Reg] := 0;
  If (Reg >= R_EAX) And (Reg <= R_EDI)
    Then
      Begin
        With p1^.Regs[Reg] Do
          Begin
            if doIncState then
              IncState(WState);
            TmpWState := WState;
            TmpRState := RState;
            FillChar(p1^.Regs[Reg], SizeOf(TContent), 0);
            WState := TmpWState;
            RState := TmpRState;
          End;
        For Counter := R_EAX to R_EDI Do
          With p1^.Regs[Counter] Do
            If (Typ = Con_Ref) And
               RegInSequence(Reg, p1^.Regs[Counter])
              Then
                Begin
                  if doIncState then
                    IncState(WState);
                  TmpWState := WState;
                  TmpRState := RState;
                  FillChar(p1^.Regs[Counter], SizeOf(TContent), 0);
                  WState := TmpWState;
                  RState := TmpRState;
                End;
       End;
End;

{Procedure AddRegsToSet(p: Pai; Var RegSet: TRegSet);
Begin
  If (p^.typ = ait_instruction) Then
    Begin
      Case Paicpu(p)^.oper[0].typ Of
        top_reg:
          If Not(Paicpu(p)^.oper[0].reg in [R_NO,R_ESP,procinfo^.FramePointer]) Then
            RegSet := RegSet + [Paicpu(p)^.oper[0].reg];
        top_ref:
          With TReference(Paicpu(p)^.oper[0]^) Do
            Begin
              If Not(Base in [procinfo^.FramePointer,R_NO,R_ESP])
                Then RegSet := RegSet + [Base];
              If Not(Index in [procinfo^.FramePointer,R_NO,R_ESP])
                Then RegSet := RegSet + [Index];
            End;
      End;
      Case Paicpu(p)^.oper[1].typ Of
        top_reg:
          If Not(Paicpu(p)^.oper[1].reg in [R_NO,R_ESP,procinfo^.FramePointer]) Then
            If RegSet := RegSet + [TRegister(TwoWords(Paicpu(p)^.oper[1]).Word1];
        top_ref:
          With TReference(Paicpu(p)^.oper[1]^) Do
            Begin
              If Not(Base in [procinfo^.FramePointer,R_NO,R_ESP])
                Then RegSet := RegSet + [Base];
              If Not(Index in [procinfo^.FramePointer,R_NO,R_ESP])
                Then RegSet := RegSet + [Index];
            End;
      End;
    End;
End;}

Function OpsEquivalent(const o1, o2: toper; Var RegInfo: TRegInfo; OpAct: TopAction): Boolean;
Begin {checks whether the two ops are equivalent}
  OpsEquivalent := False;
  if o1.typ=o2.typ then
    Case o1.typ Of
      Top_Reg:
        OpsEquivalent :=RegsEquivalent(o1.reg,o2.reg, RegInfo, OpAct);
      Top_Ref:
        OpsEquivalent := RefsEquivalent(o1.ref^, o2.ref^, RegInfo, OpAct);
      Top_Const:
        OpsEquivalent := o1.val = o2.val;
      Top_None:
        OpsEquivalent := True
    End;
End;


Function OpsEqual(const o1,o2:toper): Boolean;
Begin {checks whether the two ops are equal}
  OpsEqual := False;
  if o1.typ=o2.typ then
    Case o1.typ Of
      Top_Reg :
        OpsEqual:=o1.reg=o2.reg;
      Top_Ref :
        OpsEqual := RefsEqual(o1.ref^, o2.ref^);
      Top_Const :
        OpsEqual:=o1.val=o2.val;
      Top_Symbol :
        OpsEqual:=(o1.sym=o2.sym) and (o1.symofs=o2.symofs);
      Top_None :
        OpsEqual := True
    End;
End;

Function InstructionsEquivalent(p1, p2: Pai; Var RegInfo: TRegInfo): Boolean;
{$ifdef csdebug}
var hp: pai;
{$endif csdebug}
Begin {checks whether two Paicpu instructions are equal}
  If Assigned(p1) And Assigned(p2) And
     (Pai(p1)^.typ = ait_instruction) And
     (Pai(p1)^.typ = ait_instruction) And
     (Paicpu(p1)^.opcode = Paicpu(p2)^.opcode) And
     (Paicpu(p1)^.oper[0].typ = Paicpu(p2)^.oper[0].typ) And
     (Paicpu(p1)^.oper[1].typ = Paicpu(p2)^.oper[1].typ) And
     (Paicpu(p1)^.oper[2].typ = Paicpu(p2)^.oper[2].typ)
    Then
 {both instructions have the same structure:
  "<operator> <operand of type1>, <operand of type 2>"}
      If ((Paicpu(p1)^.opcode = A_MOV) or
          (Paicpu(p1)^.opcode = A_MOVZX) or
          (Paicpu(p1)^.opcode = A_MOVSX)) And
         (Paicpu(p1)^.oper[0].typ = top_ref) {then .oper[1]t = top_reg} Then
        If Not(RegInRef(Paicpu(p1)^.oper[1].reg, Paicpu(p1)^.oper[0].ref^)) Then
 {the "old" instruction is a load of a register with a new value, not with
  a value based on the contents of this register (so no "mov (reg), reg")}
          If Not(RegInRef(Paicpu(p2)^.oper[1].reg, Paicpu(p2)^.oper[0].ref^)) And
             RefsEqual(Paicpu(p1)^.oper[0].ref^, Paicpu(p2)^.oper[0].ref^)
            Then
 {the "new" instruction is also a load of a register with a new value, and
  this value is fetched from the same memory location}
              Begin
                With Paicpu(p2)^.oper[0].ref^ Do
                  Begin
                    If Not(Base in [procinfo^.FramePointer, R_NO, R_ESP])
       {it won't do any harm if the register is already in RegsLoadedForRef}
                      Then RegInfo.RegsLoadedForRef := RegInfo.RegsLoadedForRef + [Base];
                    If Not(Index in [procinfo^.FramePointer, R_NO, R_ESP])
                      Then RegInfo.RegsLoadedForRef := RegInfo.RegsLoadedForRef + [Index];
                  End;
 {add the registers from the reference (.oper[0]) to the RegInfo, all registers
  from the reference are the same in the old and in the new instruction
  sequence}
                AddOp2RegInfo(Paicpu(p1)^.oper[0], RegInfo);
 {the registers from .oper[1] have to be equivalent, but not necessarily equal}
                InstructionsEquivalent :=
                  RegsEquivalent(Paicpu(p1)^.oper[1].reg, Paicpu(p2)^.oper[1].reg, RegInfo, OpAct_Write);
              End
 {the registers are loaded with values from different memory locations. If
  this was allowed, the instructions "mov -4(esi),eax" and "mov -4(ebp),eax"
  would be considered equivalent}
            Else InstructionsEquivalent := False
        Else
 {load register with a value based on the current value of this register}
          Begin
            With Paicpu(p2)^.oper[0].ref^ Do
              Begin
                If Not(Base in [procinfo^.FramePointer,
                                Reg32(Paicpu(p2)^.oper[1].reg),R_NO,R_ESP])
 {it won't do any harm if the register is already in RegsLoadedForRef}
                  Then
                    Begin
                      RegInfo.RegsLoadedForRef := RegInfo.RegsLoadedForRef + [Base];
{$ifdef csdebug}
                      Writeln(att_reg2str[base], ' added');
{$endif csdebug}
                    end;
                If Not(Index in [procinfo^.FramePointer,
                                 Reg32(Paicpu(p2)^.oper[1].reg),R_NO,R_ESP])
                  Then
                    Begin
                      RegInfo.RegsLoadedForRef := RegInfo.RegsLoadedForRef + [Index];
{$ifdef csdebug}
                      Writeln(att_reg2str[index], ' added');
{$endif csdebug}
                    end;

              End;
            If Not(Reg32(Paicpu(p2)^.oper[1].reg) In [procinfo^.FramePointer,R_NO,R_ESP])
              Then
                Begin
                  RegInfo.RegsLoadedForRef := RegInfo.RegsLoadedForRef -
                                                 [Reg32(Paicpu(p2)^.oper[1].reg)];
{$ifdef csdebug}
                  Writeln(att_reg2str[Reg32(Paicpu(p2)^.oper[1].reg)], ' removed');
{$endif csdebug}
                end;
            InstructionsEquivalent :=
               OpsEquivalent(Paicpu(p1)^.oper[0], Paicpu(p2)^.oper[0], RegInfo, OpAct_Read) And
               OpsEquivalent(Paicpu(p1)^.oper[1], Paicpu(p2)^.oper[1], RegInfo, OpAct_Write)
          End
      Else
 {an instruction <> mov, movzx, movsx}
       begin
  {$ifdef csdebug}
         hp := new(pai_asm_comment,init(strpnew('checking if equivalent')));
         hp^.previous := p2;
         hp^.next := p2^.next;
         p2^.next^.previous := hp;
         p2^.next := hp;
  {$endif csdebug}
         InstructionsEquivalent :=
           OpsEquivalent(Paicpu(p1)^.oper[0], Paicpu(p2)^.oper[0], RegInfo, OpAct_Unknown) And
           OpsEquivalent(Paicpu(p1)^.oper[1], Paicpu(p2)^.oper[1], RegInfo, OpAct_Unknown) And
           OpsEquivalent(Paicpu(p1)^.oper[2], Paicpu(p2)^.oper[2], RegInfo, OpAct_Unknown)
       end
 {the instructions haven't even got the same structure, so they're certainly
  not equivalent}
    Else
      begin
  {$ifdef csdebug}
        hp := new(pai_asm_comment,init(strpnew('different opcodes/format')));
        hp^.previous := p2;
        hp^.next := p2^.next;
        p2^.next^.previous := hp;
        p2^.next := hp;
  {$endif csdebug}
        InstructionsEquivalent := False;
      end;
  {$ifdef csdebug}
    hp := new(pai_asm_comment,init(strpnew('instreq: '+tostr(byte(instructionsequivalent)))));
    hp^.previous := p2;
    hp^.next := p2^.next;
    p2^.next^.previous := hp;
    p2^.next := hp;
  {$endif csdebug}
End;

(*
Function InstructionsEqual(p1, p2: Pai): Boolean;
Begin {checks whether two Paicpu instructions are equal}
  InstructionsEqual :=
    Assigned(p1) And Assigned(p2) And
    ((Pai(p1)^.typ = ait_instruction) And
     (Pai(p1)^.typ = ait_instruction) And
     (Paicpu(p1)^.opcode = Paicpu(p2)^.opcode) And
     (Paicpu(p1)^.oper[0].typ = Paicpu(p2)^.oper[0].typ) And
     (Paicpu(p1)^.oper[1].typ = Paicpu(p2)^.oper[1].typ) And
     OpsEqual(Paicpu(p1)^.oper[0].typ, Paicpu(p1)^.oper[0], Paicpu(p2)^.oper[0]) And
     OpsEqual(Paicpu(p1)^.oper[1].typ, Paicpu(p1)^.oper[1], Paicpu(p2)^.oper[1]))
End;
*)

Procedure ReadReg(p: PPaiProp; Reg: TRegister);
Begin
  Reg := Reg32(Reg);
  If Reg in [R_EAX..R_EDI] Then
    IncState(p^.Regs[Reg].RState)
End;


Procedure ReadRef(p: PPaiProp; Ref: PReference);
Begin
  If Ref^.Base <> R_NO Then
    ReadReg(p, Ref^.Base);
  If Ref^.Index <> R_NO Then
    ReadReg(p, Ref^.Index);
End;

Procedure ReadOp(P: PPaiProp;const o:toper);
Begin
  Case o.typ Of
    top_reg: ReadReg(P, o.reg);
    top_ref: ReadRef(P, o.ref);
    top_symbol : ;
  End;
End;


Function RefInInstruction(Const Ref: TReference; p: Pai;
           RefsEq: TRefCompare): Boolean;
{checks whehter Ref is used in P}
Var TmpResult: Boolean;
Begin
  TmpResult := False;
  If (p^.typ = ait_instruction) Then
    Begin
      If (Paicpu(p)^.oper[0].typ = Top_Ref) Then
        TmpResult := RefsEq(Ref, Paicpu(p)^.oper[0].ref^);
      If Not(TmpResult) And (Paicpu(p)^.oper[1].typ = Top_Ref) Then
        TmpResult := RefsEq(Ref, Paicpu(p)^.oper[1].ref^);
      If Not(TmpResult) And (Paicpu(p)^.oper[2].typ = Top_Ref) Then
        TmpResult := RefsEq(Ref, Paicpu(p)^.oper[2].ref^);
    End;
  RefInInstruction := TmpResult;
End;

Function RefInSequence(Const Ref: TReference; Content: TContent;
           RefsEq: TRefCompare): Boolean;
{checks the whole sequence of Content (so StartMod and and the next NrOfMods
 Pai objects) to see whether Ref is used somewhere}
Var p: Pai;
    Counter: Byte;
    TmpResult: Boolean;
Begin
  p := Content.StartMod;
  TmpResult := False;
  Counter := 1;
  While Not(TmpResult) And
        (Counter <= Content.NrOfMods) Do
    Begin
      If (p^.typ = ait_instruction) And
         RefInInstruction(Ref, p, RefsEq)
        Then TmpResult := True;
      Inc(Counter);
      GetNextInstruction(p,p)
    End;
  RefInSequence := TmpResult
End;

Function ArrayRefsEq(const r1, r2: TReference): Boolean;{$ifdef tp}far;{$endif}
Begin
  ArrayRefsEq := (R1.Offset+R1.OffsetFixup = R2.Offset+R2.OffsetFixup) And
                 (R1.Segment = R2.Segment) And
                 (R1.Symbol=R2.Symbol) And
                 ((Assigned(R1.Symbol)) Or
                  (R1.Base = R2.Base))
End;


Procedure DestroyRefs(p: pai; Const Ref: TReference; WhichReg: TRegister);
{destroys all registers which possibly contain a reference to Ref, WhichReg
 is the register whose contents are being written to memory (if this proc
 is called because of a "mov?? %reg, (mem)" instruction)}
Var RefsEq: TRefCompare;
    Counter: TRegister;
Begin
  WhichReg := Reg32(WhichReg);
  If (Ref.base = procinfo^.FramePointer) or
      Assigned(Ref.Symbol) Then
    Begin
      If (Ref.Index = R_NO) And
         (Not(Assigned(Ref.Symbol)) or
          (Ref.base = R_NO)) Then
  { local variable which is not an array }
        RefsEq := {$ifdef fpc}@{$endif}RefsEqual
      Else
  { local variable which is an array }
        RefsEq := {$ifdef fpc}@{$endif}ArrayRefsEq;

{write something to a parameter, a local or global variable, so
   * with uncertain optimizations on:
      - destroy the contents of registers whose contents have somewhere a
        "mov?? (Ref), %reg". WhichReg (this is the register whose contents
        are being written to memory) is not destroyed if it's StartMod is
        of that form and NrOfMods = 1 (so if it holds ref, but is not a
        pointer based on Ref)
    * with uncertain optimizations off:
       - also destroy registers that contain any pointer}
      For Counter := R_EAX to R_EDI Do
        With PPaiProp(p^.OptInfo)^.Regs[Counter] Do
          Begin
            If (typ = Con_Ref) And
               ((Not(cs_UncertainOpts in aktglobalswitches) And
                 (NrOfMods <> 1)
                ) Or
                (RefInSequence(Ref,PPaiProp(p^.OptInfo)^.Regs[Counter],RefsEq) And
                 ((Counter <> WhichReg) Or
                  ((NrOfMods <> 1) And
 {StarMod is always of the type ait_instruction}
                   (Paicpu(StartMod)^.oper[0].typ = top_ref) And
                   RefsEq(Paicpu(StartMod)^.oper[0].ref^, Ref)
                  )
                 )
                )
               )
              Then
                DestroyReg(PPaiProp(p^.OptInfo), Counter, false)
          End
    End
  Else
{write something to a pointer location, so
   * with uncertain optimzations on:
      - do not destroy registers which contain a local/global variable or a
        parameter, except if DestroyRefs is called because of a "movsl"
   * with uncertain optimzations off:
      - destroy every register which contains a memory location
      }
    For Counter := R_EAX to R_EDI Do
      With PPaiProp(p^.OptInfo)^.Regs[Counter] Do
      If (typ = Con_Ref) And
         (Not(cs_UncertainOpts in aktglobalswitches) Or
      {for movsl}
          (Ref.Base = R_EDI) Or
      {don't destroy if reg contains a parameter, local or global variable}
          Not((NrOfMods = 1) And
              (Paicpu(StartMod)^.oper[0].typ = top_ref) And
              ((Paicpu(StartMod)^.oper[0].ref^.base = procinfo^.FramePointer) Or
                Assigned(Paicpu(StartMod)^.oper[0].ref^.Symbol)
              )
             )
         )
        Then DestroyReg(PPaiProp(p^.OptInfo), Counter, false)
End;

Procedure DestroyAllRegs(p: PPaiProp);
Var Counter: TRegister;
Begin {initializes/desrtoys all registers}
  For Counter := R_EAX To R_EDI Do
    Begin
      ReadReg(p, Counter);
      DestroyReg(p, Counter, true);
    End;
  p^.DirFlag := F_Unknown;
End;

Procedure DestroyOp(PaiObj: Pai; const o:Toper);
Begin
  Case o.typ Of
    top_reg: DestroyReg(PPaiProp(PaiObj^.OptInfo), o.reg, true);
    top_ref:
      Begin
        ReadRef(PPaiProp(PaiObj^.OptInfo), o.ref);
        DestroyRefs(PaiObj, o.ref^, R_NO);
      End;
    top_symbol:;
  End;
End;

Function DFAPass1(AsmL: PAasmOutput; BlockStart: Pai): Pai;
{gathers the RegAlloc data... still need to think about where to store it to
 avoid global vars}
Var BlockEnd: Pai;
Begin
  BlockEnd := FindLoHiLabels(LoLab, HiLab, LabDif, BlockStart);
  BuildLabelTableAndFixRegAlloc(AsmL, LTable, LoLab, LabDif, BlockStart, BlockEnd);
  DFAPass1 := BlockEnd;
End;

{$ifdef arithopt}
Procedure AddInstr2RegContents({$ifdef statedebug} asml: paasmoutput; {$endif}
p: paicpu; reg: TRegister);
{$ifdef statedebug}
var hp: pai;
{$endif statedebug}
Begin
  Reg := Reg32(Reg);
  With PPaiProp(p^.optinfo)^.Regs[reg] Do
    If (Typ = Con_Ref)
      Then
        Begin
          IncState(WState);
 {also store how many instructions are part of the sequence in the first
  instructions PPaiProp, so it can be easily accessed from within
  CheckSequence}
          Inc(NrOfMods, NrOfInstrSinceLastMod[Reg]);
          PPaiProp(Pai(StartMod)^.OptInfo)^.Regs[Reg].NrOfMods := NrOfMods;
          NrOfInstrSinceLastMod[Reg] := 0;
{$ifdef StateDebug}
          hp := new(pai_asm_comment,init(strpnew(att_reg2str[reg]+': '+tostr(PPaiProp(p^.optinfo)^.Regs[reg].WState)
                + ' -- ' + tostr(PPaiProp(p^.optinfo)^.Regs[reg].nrofmods))));
          InsertLLItem(AsmL, p, p^.next, hp);
{$endif StateDebug}
        End
      Else
        Begin
          DestroyReg(PPaiProp(p^.optinfo), Reg, true);
{$ifdef StateDebug}
          hp := new(pai_asm_comment,init(strpnew(att_reg2str[reg]+': '+tostr(PPaiProp(p^.optinfo)^.Regs[reg].WState))));
          InsertLLItem(AsmL, p, p^.next, hp);
{$endif StateDebug}
        End
End;

Procedure AddInstr2OpContents({$ifdef statedebug} asml: paasmoutput; {$endif}
p: paicpu; const oper: TOper);
Begin
  If oper.typ = top_reg Then
    AddInstr2RegContents({$ifdef statedebug} asml, {$endif}p, oper.reg)
  Else
    Begin
      ReadOp(PPaiProp(p^.optinfo), oper);
      DestroyOp(p, oper);
    End
End;
{$endif arithopt}

Procedure DoDFAPass2(
{$Ifdef StateDebug}
AsmL: PAasmOutput;
{$endif statedebug}
BlockStart, BlockEnd: Pai);
{Analyzes the Data Flow of an assembler list. Starts creating the reg
 contents for the instructions starting with p. Returns the last pai which has
 been processed}
Var
    CurProp: PPaiProp;
{$ifdef AnalyzeLoops}
    TmpState: Byte;
{$endif AnalyzeLoops}
    Cnt, InstrCnt : Longint;
    InstrProp: TInsProp;
    UsedRegs: TRegSet;
    p, hp : Pai;
    TmpRef: TReference;
    TmpReg: TRegister;
Begin
  p := BlockStart;
  UsedRegs := [];
  UpdateUsedregs(UsedRegs, p);
  SkipHead(P);
  BlockStart := p;
  InstrCnt := 1;
  FillChar(NrOfInstrSinceLastMod, SizeOf(NrOfInstrSinceLastMod), 0);
  While (P <> BlockEnd) Do
    Begin
{$IfDef TP}
      New(CurProp);
{$Else TP}
      CurProp := @PaiPropBlock^[InstrCnt];
{$EndIf TP}
      If (p <> BlockStart)
        Then
          Begin
{$ifdef JumpAnal}
            If (p^.Typ <> ait_label) Then
{$endif JumpAnal}
              Begin
                GetLastInstruction(p, hp);
                CurProp^.Regs := PPaiProp(hp^.OptInfo)^.Regs;
                CurProp^.DirFlag := PPaiProp(hp^.OptInfo)^.DirFlag;
              End
          End
        Else
          Begin
            FillChar(CurProp^, SizeOf(CurProp^), 0);
{            For TmpReg := R_EAX to R_EDI Do
              CurProp^.Regs[TmpReg].WState := 1;}
          End;
      CurProp^.UsedRegs := UsedRegs;
      CurProp^.CanBeRemoved := False;
      UpdateUsedRegs(UsedRegs, Pai(p^.Next));
{$ifdef TP}
      PPaiProp(p^.OptInfo) := CurProp;
{$Endif TP}
      For TmpReg := R_EAX To R_EDI Do
        Inc(NrOfInstrSinceLastMod[TmpReg]);
      Case p^.typ Of
        ait_label:
{$Ifndef JumpAnal}
          If (Pai_label(p)^.l^.is_used) Then
            DestroyAllRegs(CurProp);
{$Else JumpAnal}
          Begin
           If (Pai_Label(p)^.is_used) Then
             With LTable^[Pai_Label(p)^.l^.labelnr-LoLab] Do
{$IfDef AnalyzeLoops}
              If (RefsFound = Pai_Label(p)^.l^.RefCount)
{$Else AnalyzeLoops}
              If (JmpsProcessed = Pai_Label(p)^.l^.RefCount)
{$EndIf AnalyzeLoops}
                Then
{all jumps to this label have been found}
{$IfDef AnalyzeLoops}
                  If (JmpsProcessed > 0)
                    Then
{$EndIf AnalyzeLoops}
 {we've processed at least one jump to this label}
                      Begin
                        If (GetLastInstruction(p, hp) And
                           Not(((hp^.typ = ait_instruction)) And
                                (paicpu_labeled(hp)^.is_jmp))
                          Then
  {previous instruction not a JMP -> the contents of the registers after the
   previous intruction has been executed have to be taken into account as well}
                            For TmpReg := R_EAX to R_EDI Do
                              Begin
                                If (CurProp^.Regs[TmpReg].WState <>
                                    PPaiProp(hp^.OptInfo)^.Regs[TmpReg].WState)
                                  Then DestroyReg(CurProp, TmpReg, true)
                              End
                      End
{$IfDef AnalyzeLoops}
                    Else
 {a label from a backward jump (e.g. a loop), no jump to this label has
  already been processed}
                      If GetLastInstruction(p, hp) And
                         Not(hp^.typ = ait_instruction) And
                            (paicpu_labeled(hp)^.opcode = A_JMP))
                        Then
  {previous instruction not a jmp, so keep all the registers' contents from the
   previous instruction}
                          Begin
                            CurProp^.Regs := PPaiProp(hp^.OptInfo)^.Regs;
                            CurProp^.DirFlag := PPaiProp(hp^.OptInfo)^.DirFlag;
                          End
                        Else
  {previous instruction a jmp and no jump to this label processed yet}
                          Begin
                            hp := p;
                            Cnt := InstrCnt;
     {continue until we find a jump to the label or a label which has already
      been processed}
                            While GetNextInstruction(hp, hp) And
                                  Not((hp^.typ = ait_instruction) And
                                      (paicpu(hp)^.is_jmp) and
                                      (pasmlabel(paicpu(hp)^.oper[0].sym)^.labelnr = Pai_Label(p)^.l^.labelnr)) And
                                  Not((hp^.typ = ait_label) And
                                      (LTable^[Pai_Label(hp)^.l^.labelnr-LoLab].RefsFound
                                       = Pai_Label(hp)^.l^.RefCount) And
                                      (LTable^[Pai_Label(hp)^.l^.labelnr-LoLab].JmpsProcessed > 0)) Do
                              Inc(Cnt);
                            If (hp^.typ = ait_label)
                              Then
   {there's a processed label after the current one}
                                Begin
                                  CurProp^.Regs := PaiPropBlock^[Cnt].Regs;
                                  CurProp^.DirFlag := PaiPropBlock^[Cnt].DirFlag;
                                End
                              Else
   {there's no label anymore after the current one, or they haven't been
    processed yet}
                                Begin
                                  GetLastInstruction(p, hp);
                                  CurProp^.Regs := PPaiProp(hp^.OptInfo)^.Regs;
                                  CurProp^.DirFlag := PPaiProp(hp^.OptInfo)^.DirFlag;
                                  DestroyAllRegs(PPaiProp(hp^.OptInfo))
                                End
                          End
{$EndIf AnalyzeLoops}
                Else
{not all references to this label have been found, so destroy all registers}
                  Begin
                    GetLastInstruction(p, hp);
                    CurProp^.Regs := PPaiProp(hp^.OptInfo)^.Regs;
                    CurProp^.DirFlag := PPaiProp(hp^.OptInfo)^.DirFlag;
                    DestroyAllRegs(CurProp)
                  End;
          End;
{$EndIf JumpAnal}

{$ifdef GDB}
        ait_stabs, ait_stabn, ait_stab_function_name:;
{$endif GDB}
        ait_align: ; { may destroy flags !!! }
        ait_instruction:
          Begin
            if paicpu(p)^.is_jmp then
             begin
{$IfNDef JumpAnal}
  ;
{$Else JumpAnal}
          With LTable^[pasmlabel(paicpu(p)^.oper[0].sym)^.labelnr-LoLab] Do
            If (RefsFound = pasmlabel(paicpu(p)^.oper[0].sym)^.RefCount) Then
              Begin
                If (InstrCnt < InstrNr)
                  Then
                {forward jump}
                    If (JmpsProcessed = 0) Then
                {no jump to this label has been processed yet}
                      Begin
                        PaiPropBlock^[InstrNr].Regs := CurProp^.Regs;
                        PaiPropBlock^[InstrNr].DirFlag := CurProp^.DirFlag;
                        Inc(JmpsProcessed);
                      End
                    Else
                      Begin
                        For TmpReg := R_EAX to R_EDI Do
                          If (PaiPropBlock^[InstrNr].Regs[TmpReg].WState <>
                             CurProp^.Regs[TmpReg].WState) Then
                            DestroyReg(@PaiPropBlock^[InstrNr], TmpReg, true);
                        Inc(JmpsProcessed);
                      End
{$ifdef AnalyzeLoops}
                  Else
{                backward jump, a loop for example}
{                    If (JmpsProcessed > 0) Or
                       Not(GetLastInstruction(PaiObj, hp) And
                           (hp^.typ = ait_labeled_instruction) And
                           (paicpu_labeled(hp)^.opcode = A_JMP))
                      Then}
{instruction prior to label is not a jmp, or at least one jump to the label
 has yet been processed}
                        Begin
                          Inc(JmpsProcessed);
                          For TmpReg := R_EAX to R_EDI Do
                            If (PaiPropBlock^[InstrNr].Regs[TmpReg].WState <>
                                CurProp^.Regs[TmpReg].WState)
                              Then
                                Begin
                                  TmpState := PaiPropBlock^[InstrNr].Regs[TmpReg].WState;
                                  Cnt := InstrNr;
                                  While (TmpState = PaiPropBlock^[Cnt].Regs[TmpReg].WState) Do
                                    Begin
                                      DestroyReg(@PaiPropBlock^[Cnt], TmpReg, true);
                                      Inc(Cnt);
                                    End;
                                  While (Cnt <= InstrCnt) Do
                                    Begin
                                      Inc(PaiPropBlock^[Cnt].Regs[TmpReg].WState);
                                      Inc(Cnt)
                                    End
                                End;
                        End
{                      Else }
{instruction prior to label is a jmp and no jumps to the label have yet been
 processed}
{                        Begin
                          Inc(JmpsProcessed);
                          For TmpReg := R_EAX to R_EDI Do
                            Begin
                              TmpState := PaiPropBlock^[InstrNr].Regs[TmpReg].WState;
                              Cnt := InstrNr;
                              While (TmpState = PaiPropBlock^[Cnt].Regs[TmpReg].WState) Do
                                Begin
                                  PaiPropBlock^[Cnt].Regs[TmpReg] := CurProp^.Regs[TmpReg];
                                  Inc(Cnt);
                                End;
                              TmpState := PaiPropBlock^[InstrNr].Regs[TmpReg].WState;
                              While (TmpState = PaiPropBlock^[Cnt].Regs[TmpReg].WState) Do
                                Begin
                                  DestroyReg(@PaiPropBlock^[Cnt], TmpReg, true);
                                  Inc(Cnt);
                                End;
                              While (Cnt <= InstrCnt) Do
                                Begin
                                  Inc(PaiPropBlock^[Cnt].Regs[TmpReg].WState);
                                  Inc(Cnt)
                                End
                            End
                        End}
{$endif AnalyzeLoops}
          End;
{$EndIf JumpAnal}
          end
          else
           begin
            InstrProp := InsProp[Paicpu(p)^.opcode];
            Case Paicpu(p)^.opcode Of
              A_MOV, A_MOVZX, A_MOVSX:
                Begin
                  Case Paicpu(p)^.oper[0].typ Of
                    Top_Reg:
                      Case Paicpu(p)^.oper[1].typ Of
                        Top_Reg:
                          Begin
                            DestroyReg(CurProp, Paicpu(p)^.oper[1].reg, true);
                            ReadReg(CurProp, Paicpu(p)^.oper[0].reg);
{                            CurProp^.Regs[Paicpu(p)^.oper[1].reg] :=
                              CurProp^.Regs[Paicpu(p)^.oper[0].reg];
                            If (CurProp^.Regs[Paicpu(p)^.oper[1].reg].ModReg = R_NO) Then
                              CurProp^.Regs[Paicpu(p)^.oper[1].reg].ModReg :=
                                Paicpu(p)^.oper[0].reg;}
                          End;
                        Top_Ref:
                          Begin
                            ReadReg(CurProp, Paicpu(p)^.oper[0].reg);
                            ReadRef(CurProp, Paicpu(p)^.oper[1].ref);
                            DestroyRefs(p, Paicpu(p)^.oper[1].ref^, Paicpu(p)^.oper[0].reg);
                          End;
                      End;
                    Top_Ref:
                      Begin {destination is always a register in this case}
                        ReadRef(CurProp, Paicpu(p)^.oper[0].ref);
                        ReadReg(CurProp, Paicpu(p)^.oper[1].reg);
                        TmpReg := Reg32(Paicpu(p)^.oper[1].reg);
                        If RegInRef(TmpReg, Paicpu(p)^.oper[0].ref^) And
                           (CurProp^.Regs[TmpReg].Typ = Con_Ref)
                          Then
                            Begin
                              With CurProp^.Regs[TmpReg] Do
                                Begin
                                  IncState(WState);
 {also store how many instructions are part of the sequence in the first
  instructions PPaiProp, so it can be easily accessed from within
  CheckSequence}
                                  Inc(NrOfMods, NrOfInstrSinceLastMod[TmpReg]);
                                  PPaiProp(Pai(StartMod)^.OptInfo)^.Regs[TmpReg].NrOfMods := NrOfMods;
                                  NrOfInstrSinceLastMod[TmpReg] := 0;
                                End;
                            End
                          Else
                            Begin
                              DestroyReg(CurProp, TmpReg, true);
                              If Not(RegInRef(TmpReg, Paicpu(p)^.oper[0].ref^)) Then
                                With CurProp^.Regs[TmpReg] Do
                                  Begin
                                    Typ := Con_Ref;
                                    StartMod := p;
                                    NrOfMods := 1;
                                  End
                            End;
{$ifdef StateDebug}
                  hp := new(pai_asm_comment,init(strpnew(att_reg2str[TmpReg]+': '+tostr(CurProp^.Regs[TmpReg].WState))));
                  InsertLLItem(AsmL, p, p^.next, hp);
{$endif StateDebug}

                      End;
                    top_symbol,Top_Const:
                      Begin
                        Case Paicpu(p)^.oper[1].typ Of
                          Top_Reg:
                            Begin
                              TmpReg := Reg32(Paicpu(p)^.oper[1].reg);
                              With CurProp^.Regs[TmpReg] Do
                                Begin
                                  DestroyReg(CurProp, TmpReg, true);
                                  typ := Con_Const;
                                  StartMod := p;
                                End
                            End;
                          Top_Ref:
                            Begin
                              ReadRef(CurProp, Paicpu(p)^.oper[1].ref);
                              DestroyRefs(P, Paicpu(p)^.oper[1].ref^, R_NO);
                            End;
                        End;
                      End;
                  End;
                End;
              A_DIV, A_IDIV, A_MUL:
                Begin
                  ReadOp(Curprop, Paicpu(p)^.oper[0]);
                  ReadReg(CurProp,R_EAX);
                  If (Paicpu(p)^.OpCode = A_IDIV) or
                     (Paicpu(p)^.OpCode = A_DIV) Then
                    ReadReg(CurProp,R_EDX);
                  DestroyReg(CurProp, R_EAX, true);
                  DestroyReg(CurProp, R_EDX, true)
                End;
              A_IMUL:
                Begin
                  ReadOp(CurProp,Paicpu(p)^.oper[0]);
                  ReadOp(CurProp,Paicpu(p)^.oper[1]);
                  If (Paicpu(p)^.oper[2].typ = top_none) Then
                    If (Paicpu(p)^.oper[1].typ = top_none) Then
                      Begin
                        ReadReg(CurProp,R_EAX);
                        DestroyReg(CurProp, R_EAX, true);
                        DestroyReg(CurProp, R_EDX, true)
                      End
                    Else
            {$ifdef arithopt}
                      AddInstr2OpContents(Paicpu(p), Paicpu(p)^.oper[1])
            {$else arithopt}
                      DestroyOp(p, Paicpu(p)^.oper[1])
            {$endif arithopt}
                  Else
            {$ifdef arithopt}
                    AddInstr2OpContents(Paicpu(p), Paicpu(p)^.oper[2]);
            {$else arithopt}
                    DestroyOp(p, Paicpu(p)^.oper[2]);
            {$endif arithopt}
                End;
{$ifdef arithopt}
              A_LEA:
                begin
                  readop(curprop,paicpu(p)^.oper[0]);
                  if reginref(paicpu(p)^.oper[1].reg,paicpu(p)^.oper[0].ref^) then
                    AddInstr2RegContents(paicpu(p), paicpu(p)^.oper[1].reg)
                  else destroyreg(curprop,paicpu(p)^.oper[1].reg,true);
                end;
{$endif arithopt}
              Else
                Begin
                  Cnt := 1;
                  While (Cnt <= MaxCh) And
                        (InstrProp.Ch[Cnt] <> Ch_None) Do
                    Begin
                      Case InstrProp.Ch[Cnt] Of
                        Ch_REAX..Ch_REDI: ReadReg(CurProp,TCh2Reg(InstrProp.Ch[Cnt]));
                        Ch_WEAX..Ch_RWEDI:
                          Begin
                            If (InstrProp.Ch[Cnt] >= Ch_RWEAX) Then
                              ReadReg(CurProp, TCh2Reg(InstrProp.Ch[Cnt]));
                            DestroyReg(CurProp, TCh2Reg(InstrProp.Ch[Cnt]), true);
                          End;
{$ifdef arithopt}
                        Ch_MEAX..Ch_MEDI:
                          AddInstr2RegContents({$ifdef statedebug} asml, {$endif}
                                               Paicpu(p),
                                               TCh2Reg(InstrProp.Ch[Cnt]));
{$endif arithopt}
                        Ch_CDirFlag: CurProp^.DirFlag := F_NotSet;
                        Ch_SDirFlag: CurProp^.DirFlag := F_Set;
                        Ch_Rop1: ReadOp(CurProp, Paicpu(p)^.oper[0]);
                        Ch_Rop2: ReadOp(CurProp, Paicpu(p)^.oper[1]);
                        Ch_ROp3: ReadOp(CurProp, Paicpu(p)^.oper[2]);
                        Ch_Wop1..Ch_RWop1:
                          Begin
                            If (InstrProp.Ch[Cnt] in [Ch_RWop1]) Then
                              ReadOp(CurProp, Paicpu(p)^.oper[0]);
                            DestroyOp(p, Paicpu(p)^.oper[0]);
                          End;
{$ifdef arithopt}
                        Ch_Mop1:
                          AddInstr2OpContents({$ifdef statedebug} asml, {$endif}
                          Paicpu(p), Paicpu(p)^.oper[0]);
{$endif arithopt}
                        Ch_Wop2..Ch_RWop2:
                          Begin
                            If (InstrProp.Ch[Cnt] = Ch_RWop2) Then
                              ReadOp(CurProp, Paicpu(p)^.oper[1]);
                            DestroyOp(p, Paicpu(p)^.oper[1]);
                          End;
{$ifdef arithopt}
                        Ch_Mop2:
                          AddInstr2OpContents({$ifdef statedebug} asml, {$endif}
                          Paicpu(p), Paicpu(p)^.oper[1]);
{$endif arithopt}
                        Ch_WOp3..Ch_RWOp3:
                          Begin
                            If (InstrProp.Ch[Cnt] = Ch_RWOp3) Then
                              ReadOp(CurProp, Paicpu(p)^.oper[2]);
                            DestroyOp(p, Paicpu(p)^.oper[2]);
                          End;
{$ifdef arithopt}
                        Ch_Mop3:
                          AddInstr2OpContents({$ifdef statedebug} asml, {$endif}
                          Paicpu(p), Paicpu(p)^.oper[2]);
{$endif arithopt}
                        Ch_WMemEDI:
                          Begin
                            ReadReg(CurProp, R_EDI);
                            FillChar(TmpRef, SizeOf(TmpRef), 0);
                            TmpRef.Base := R_EDI;
                            DestroyRefs(p, TmpRef, R_NO)
                          End;
                        Ch_RFlags, Ch_WFlags, Ch_RWFlags, Ch_FPU:
                        Else
                          Begin
                            DestroyAllRegs(CurProp);
                          End;
                      End;
                      Inc(Cnt);
                    End
                End;
              end;
            End;
          End
        Else
          Begin
            DestroyAllRegs(CurProp);
          End;
      End;
      Inc(InstrCnt);
      GetNextInstruction(p, p);
    End;
End;

Function InitDFAPass2(BlockStart, BlockEnd: Pai): Boolean;
{reserves memory for the PPaiProps in one big memory block when not using
 TP, returns False if not enough memory is available for the optimizer in all
 cases}
Var p: Pai;
    Count: Longint;
{    TmpStr: String; }
Begin
  P := BlockStart;
  SkipHead(P);
  NrOfPaiObjs := 0;
  While (P <> BlockEnd) Do
    Begin
{$IfDef JumpAnal}
      Case P^.Typ Of
        ait_label:
          Begin
            If (Pai_Label(p)^.l^.is_used) Then
              LTable^[Pai_Label(P)^.l^.labelnr-LoLab].InstrNr := NrOfPaiObjs
          End;
        ait_instruction:
          begin
            if paicpu(p)^.is_jmp then
             begin
               If (pasmlabel(paicpu(P)^.oper[0].sym)^.labelnr >= LoLab) And
                  (pasmlabel(paicpu(P)^.oper[0].sym)^.labelnr <= HiLab) Then
                 Inc(LTable^[pasmlabel(paicpu(P)^.oper[0].sym)^.labelnr-LoLab].RefsFound);
             end;
          end;
{        ait_instruction:
          Begin
           If (Paicpu(p)^.opcode = A_PUSH) And
              (Paicpu(p)^.oper[0].typ = top_symbol) And
              (PCSymbol(Paicpu(p)^.oper[0])^.offset = 0) Then
             Begin
               TmpStr := StrPas(PCSymbol(Paicpu(p)^.oper[0])^.symbol);
               If}
      End;
{$EndIf JumpAnal}
      Inc(NrOfPaiObjs);
      GetNextInstruction(p, p);
    End;
{$IfDef TP}
  If (MemAvail < (SizeOf(TPaiProp)*NrOfPaiObjs))
     Or (NrOfPaiObjs = 0)
    {this doesn't have to be one contiguous block}
    Then InitDFAPass2 := False
    Else InitDFAPass2 := True;
{$Else}
{Uncomment the next line to see how much memory the reloading optimizer needs}
{  Writeln((NrOfPaiObjs*(((SizeOf(TPaiProp)+3)div 4)*4)));}
{no need to check mem/maxavail, we've got as much virtual memory as we want}
  If NrOfPaiObjs <> 0 Then
    Begin
      InitDFAPass2 := True;
      GetMem(PaiPropBlock, NrOfPaiObjs*(((SizeOf(TPaiProp)+3)div 4)*4));
      p := BlockStart;
      SkipHead(p);
      For Count := 1 To NrOfPaiObjs Do
        Begin
          PPaiProp(p^.OptInfo) := @PaiPropBlock^[Count];
          GetNextInstruction(p, p);
        End;
    End
  Else InitDFAPass2 := False;
 {$EndIf TP}
End;

Function DFAPass2(
{$ifdef statedebug}
                   AsmL: PAasmOutPut;
{$endif statedebug}
                                      BlockStart, BlockEnd: Pai): Boolean;
Begin
  If InitDFAPass2(BlockStart, BlockEnd) Then
    Begin
      DoDFAPass2(
{$ifdef statedebug}
         asml,
{$endif statedebug}
         BlockStart, BlockEnd);
      DFAPass2 := True
    End
  Else DFAPass2 := False;
End;

Procedure ShutDownDFA;
Begin
  If LabDif <> 0 Then
    FreeMem(LTable, LabDif*SizeOf(TLabelTableItem));
End;

End.

{
 $Log$
 Revision 1.84  2000-02-24 18:41:38  peter
   * removed warnings/notes

 Revision 1.83  2000/02/10 14:57:14  jonas
   * fixed bug due to lack of support for top_symbol operands

 Revision 1.82  2000/02/09 13:22:51  peter
   * log truncated

 Revision 1.81  2000/02/04 13:52:17  jonas
   * better support for regvars (still needs a move of the call to the optimize
   procedure to a place where resetusableregisters is not yet called to work)
   * small regallocation fixes for -dnewoptimizations

 Revision 1.80  2000/01/28 15:15:31  jonas
    * moved skipinstr from daopt386 to aasm
    * fixed crashing bug with -dreplacereg in csopt386.pas

 Revision 1.79  2000/01/22 16:08:06  jonas
   * better handling of exit(func_result) (no release of register that
     holds the function result added)
   * several other small improvements for reg allocation fixes

 Revision 1.78  2000/01/13 13:07:06  jonas
   * released -dalignreg
   * some small fixes to -dnewOptimizations helper procedures

 Revision 1.77  2000/01/09 01:44:21  jonas
   + (de)allocation info for EDI to fix reported bug on mailinglist.
     Also some (de)allocation info for ESI added. Between -dallocEDI
     because at this time of the night bugs could easily slip in ;)

 Revision 1.76  2000/01/07 01:14:23  peter
   * updated copyright to 2000

 Revision 1.75  1999/12/05 16:48:43  jonas
   * CSE of constant loading in regs works properly again
   + if a constant is stored into memory using "mov const, ref" and
     there is a reg that contains this const, it is changed into
     "mov reg, ref"

 Revision 1.74  1999/12/02 11:26:41  peter
   * newoptimizations define added

 Revision 1.73  1999/11/27 23:45:43  jonas
   * even more missing register deallocations are added!

 Revision 1.72  1999/11/21 13:06:30  jonas
   * improved fixing of missing regallocs (they're almost all correct
     now!)

 Revision 1.71  1999/11/20 12:50:32  jonas
   * fixed small typo (C_M* -> Ch_M*) so -darithopt compiles again

 Revision 1.70  1999/11/14 11:25:38  jonas
   * fixed stupid typo in previous commit :(

 Revision 1.69  1999/11/13 19:01:51  jonas
   * div, idiv and mul destroy edx!!

 Revision 1.68  1999/11/07 14:57:09  jonas
   * much more complete/waterproof RegModifiedByInstruction()

 Revision 1.67  1999/11/06 14:34:20  peter
   * truncated log to 20 revs

 Revision 1.66  1999/11/05 16:01:46  jonas
   + first implementation of choosing least used register for alignment code
      (not yet working, between ifdef alignreg)

 Revision 1.65  1999/10/27 16:11:28  peter
   * insns.dat is used to generate all i386*.inc files

 Revision 1.64  1999/10/23 14:44:24  jonas
   * finally got around making GetNextInstruction return false when
     the current pai object is a AsmBlockStart marker
   * changed a loop in aopt386 which was incompatible with this change

 Revision 1.63  1999/10/14 14:57:52  florian
   - removed the hcodegen use in the new cg, use cgbase instead

 Revision 1.62  1999/10/07 16:07:35  jonas
   * small bugfix in ArrayRefsEq

}