{
    This file is part of the Free Pascal run time library.
    Copyright (c) 1999-2000 by the Free Pascal development team.

    Borland Pascal 7 Compatible CRT Unit - Go32V2 implementation

    See the file COPYING.FPC, included in this distribution,
    for details about the copyright.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

 **********************************************************************}
unit crt;

interface

{$i crth.inc}

Var
  ScreenWidth,
  ScreenHeight : longint;

implementation

uses
  go32;

{$ASMMODE ATT}

var
  DelayCnt : Longint;
  VidSeg : Word;

{
  definition of textrec is in textrec.inc
}
{$i textrec.inc}


{****************************************************************************
                           Low level Routines
****************************************************************************}

procedure setscreenmode(mode : byte);
var
  regs : trealregs;
begin
  regs.realeax:=mode;
  realintr($10,regs);
end;


function GetScreenHeight : longint;
begin
  getscreenheight:=mem[$40:$84]+1;
  If mem[$40:$84]=0 then
    getscreenheight := 25;
end;


function GetScreenWidth : longint;
begin
  getscreenwidth:=memw[$40:$4a];
end;


procedure SetScreenCursor(x,y : longint);
var
  regs : trealregs;
begin
  regs.realeax:=$0200;
  regs.realebx:=0;
  regs.realedx:=(y-1) shl 8+(x-1);
  realintr($10,regs);
end;


procedure GetScreenCursor(var x,y : longint);
begin
  x:=mem[$40:$50]+1;
  y:=mem[$40:$51]+1;
end;


{****************************************************************************
                              Helper Routines
****************************************************************************}

Function WinMinX: Byte;
{
  Current Minimum X coordinate
}
Begin
  WinMinX:=(WindMin and $ff)+1;
End;



Function WinMinY: Byte;
{
  Current Minimum Y Coordinate
}
Begin
  WinMinY:=(WindMin shr 8)+1;
End;



Function WinMaxX: Byte;
{
  Current Maximum X coordinate
}
Begin
  WinMaxX:=(WindMax and $ff)+1;
End;



Function WinMaxY: Byte;
{
  Current Maximum Y coordinate;
}
Begin
  WinMaxY:=(WindMax shr 8) + 1;
End;



Function FullWin:boolean;
{
  Full Screen 80x25? Window(1,1,80,25) is used, allows faster routines
}
begin
  FullWin:=(WinMinX=1) and (WinMinY=1) and
           (WinMaxX=ScreenWidth) and (WinMaxY=ScreenHeight);
end;


{****************************************************************************
                             Public Crt Functions
****************************************************************************}


procedure textmode (Mode: word);

var
   regs : trealregs;

begin
  lastmode:=mode;
  mode:=mode and $ff;
  setscreenmode(mode);

  { set 8x8 font }
  if (lastmode and $100)<>0 then
    begin
       regs.realeax:=$1112;
       regs.realebx:=$0;
       realintr($10,regs);
    end;

  screenwidth:=getscreenwidth;
  screenheight:=getscreenheight;
  windmin:=0;
  windmax:=(screenwidth-1) or ((screenheight-1) shl 8);
end;


Procedure TextColor(Color: Byte);
{
  Switch foregroundcolor
}
Begin
  TextAttr:=(Color and $f) or (TextAttr and $70);
  If (Color>15) Then TextAttr:=TextAttr Or Blink;
End;



Procedure TextBackground(Color: Byte);
{
  Switch backgroundcolor
}
Begin
  TextAttr:=((Color shl 4) and ($f0 and not Blink)) or (TextAttr and ($0f OR Blink) );
End;



Procedure HighVideo;
{
  Set highlighted output.
}
Begin
  TextColor(TextAttr Or $08);
End;



Procedure LowVideo;
{
  Set normal output
}
Begin
  TextColor(TextAttr And $77);
End;



Procedure NormVideo;
{
  Set normal back and foregroundcolors.
}
Begin
  TextColor(7);
  TextBackGround(0);
End;


Procedure GotoXy(X: Byte; Y: Byte);
{
  Go to coordinates X,Y in the current window.
}
Begin
  If (X>0) and (X<=WinMaxX- WinMinX+1) and
     (Y>0) and (Y<=WinMaxY-WinMinY+1) Then
   Begin
     Inc(X,WinMinX-1);
     Inc(Y,WinMinY-1);
     SetScreenCursor(x,y);
   End;
End;


Procedure Window(X1, Y1, X2, Y2: Byte);
{
  Set screen window to the specified coordinates.
}
Begin
  if (X1>X2) or (X2>ScreenWidth) or
     (Y1>Y2) or (Y2>ScreenHeight) then
   exit;
  WindMin:=((Y1-1) Shl 8)+(X1-1);
  WindMax:=((Y2-1) Shl 8)+(X2-1);
  GoToXY(1,1);
End;


Procedure ClrScr;
{
  Clear the current window, and set the cursor on 1,1
}
var
  fil : word;
  y   : longint;
begin
  fil:=32 or (textattr shl 8);
  if FullWin then
   DosmemFillWord(VidSeg,0,ScreenHeight*ScreenWidth,fil)
  else
   begin
     for y:=WinMinY to WinMaxY do
      DosmemFillWord(VidSeg,((y-1)*ScreenWidth+(WinMinX-1))*2,WinMaxX-WinMinX+1,fil);
   end;
  Gotoxy(1,1);
end;


Procedure ClrEol;
{
  Clear from current position to end of line.
}
var
  x,y : longint;
  fil : word;
Begin
  GetScreenCursor(x,y);
  fil:=32 or (textattr shl 8);
  if x<=WinMaxX then
   DosmemFillword(VidSeg,((y-1)*ScreenWidth+(x-1))*2,WinMaxX-x+1,fil);
End;



Function WhereX: Byte;
{
  Return current X-position of cursor.
}
var
  x,y : longint;
Begin
  GetScreenCursor(x,y);
  WhereX:=x-WinMinX+1;
End;



Function WhereY: Byte;
{
  Return current Y-position of cursor.
}
var
  x,y : longint;
Begin
  GetScreenCursor(x,y);
  WhereY:=y-WinMinY+1;
End;


{*************************************************************************
                            KeyBoard
*************************************************************************}

var
   is_last : boolean;
   last    : char;

function readkey : char;
var
  char2 : char;
  char1 : char;
  regs : trealregs;
begin
  if is_last then
   begin
     is_last:=false;
     readkey:=last;
   end
  else
   begin
     regs.ah:=$10;
     realintr($16,regs);
     if (regs.al=$e0) and (regs.ah<>0) then
      regs.al:=0;
     char1:=chr(regs.al);
     char2:=chr(regs.ah);
     if char1=#0 then
      begin
        is_last:=true;
        last:=char2;
      end;
     readkey:=char1;
   end;
end;


function keypressed : boolean;
var
  regs : trealregs;
begin
  if is_last then
   begin
     keypressed:=true;
     exit;
   end
  else
   begin
     regs.ah:=$11;
     realintr($16,regs);
     keypressed:=((regs.realflags and zeroflag) = 0);
   end;
end;


{*************************************************************************
                                   Delay
*************************************************************************}

procedure Delayloop;assembler;
asm
.LDelayLoop1:
        subl    $1,%eax
        jc      .LDelayLoop2
        cmpl    %fs:(%edi),%ebx
        je      .LDelayLoop1
.LDelayLoop2:
end;


procedure initdelay;assembler;
asm
        pushl %ebx
        pushl %edi
        { for some reason, using int $31/ax=$901 doesn't work here }
        { and interrupts are always disabled at this point when    }
        { running a program inside gdb(pas). Web bug 1345 (JM)     }
        sti
        movl    $0x46c,%edi
        movl    $-28,%edx
        movl    %fs:(%edi),%ebx
.LInitDel1:
        cmpl    %fs:(%edi),%ebx
        je      .LInitDel1
        movl    %fs:(%edi),%ebx
        movl    %edx,%eax
        call    DelayLoop

        notl    %eax
        xorl    %edx,%edx
        movl    $55,%ecx
        divl    %ecx
        movl    %eax,DelayCnt
        popl %edi
        popl %ebx
end;


procedure Delay(MS: Word);assembler;
asm
        pushl %ebx
        pushl %edi
        movzwl  MS,%ecx
        jecxz   .LDelay2
        movl    $0x400,%edi
        movl    DelayCnt,%edx
        movl    %fs:(%edi),%ebx
.LDelay1:
        movl    %edx,%eax
        call    DelayLoop
        loop    .LDelay1
.LDelay2:
        popl %edi
        popl %ebx
end;


procedure sound(hz : word);
begin
  if hz=0 then
   begin
     nosound;
     exit;
   end;
  asm
        movzwl  hz,%ecx
        movl    $1193046,%eax
        cltd
        divl    %ecx
        movl    %eax,%ecx
        inb     $0x61,%al
        testb   $0x3,%al
        jnz     .Lsound_next
        orb     $0x3,%al
        outb    %al,$0x61
        movb    $0xb6,%al
        outb    %al,$0x43
     .Lsound_next:
        movb    %cl,%al
        outb    %al,$0x42
        movb    %ch,%al
        outb    %al,$0x42
  end ['EAX','ECX','EDX'];
end;


procedure nosound;
begin
  asm
        inb     $0x61,%al
        andb    $0xfc,%al
        outb    %al,$0x61
  end ['EAX'];
end;



{****************************************************************************
                          HighLevel Crt Functions
****************************************************************************}

procedure removeline(y : longint);
var
  fil : word;
begin
  fil:=32 or (textattr shl 8);
  y:=WinMinY+y-1;
  While (y<WinMaxY) do
   begin
     dosmemmove(VidSeg,(y*ScreenWidth+(WinMinX-1))*2,
                VidSeg,((y-1)*ScreenWidth+(WinMinX-1))*2,(WinMaxX-WinMinX+1)*2);
     inc(y);
   end;
  dosmemfillword(VidSeg,((WinMaxY-1)*ScreenWidth+(WinMinX-1))*2,(WinMaxX-WinMinX+1),fil);
end;


procedure delline;
begin
  removeline(wherey);
end;


procedure insline;
var
  my,y : longint;
  fil : word;
begin
  fil:=32 or (textattr shl 8);
  y:=WhereY;
  my:=WinMaxY-WinMinY;
  while (my>=y) do
   begin
     dosmemmove(VidSeg,(((WinMinY+my-1)-1)*ScreenWidth+(WinMinX-1))*2,
                VidSeg,(((WinMinY+my)-1)*ScreenWidth+(WinMinX-1))*2,(WinMaxX-WinMinX+1)*2);
     dec(my);
   end;
  dosmemfillword(VidSeg,(((WinMinY+y-1)-1)*ScreenWidth+(WinMinX-1))*2,(WinMaxX-WinMinX+1),fil);
end;




{****************************************************************************
                             Extra Crt Functions
****************************************************************************}

procedure cursoron;
var
  regs : trealregs;
begin
  regs.realeax:=$0100;
  regs.realecx:=$90A;
  If VidSeg=$b800 then
    regs.realecx:=$90A
  else
    regs.realecx:=$b0d;
  realintr($10,regs);
end;


procedure cursoroff;
var
  regs : trealregs;
begin
  regs.realeax:=$0100;
  regs.realecx:=$ffff;
  realintr($10,regs);
end;


procedure cursorbig;
var
  regs : trealregs;
begin
  regs.realeax:=$0100;
  regs.realecx:=$10A;
  realintr($10,regs);
end;


{*****************************************************************************
                          Read and Write routines
*****************************************************************************}

var
  CurrX,CurrY : longint;

Procedure WriteChar(c:char);
var
  regs : trealregs;
begin
  case c of
   #10 : inc(CurrY);
   #13 : CurrX:=WinMinX;
    #8 : begin
           if CurrX>WinMinX then
            dec(CurrX);
         end;
    #7 : begin { beep }
           regs.dl:=7;
           regs.ah:=2;
           realintr($21,regs);
         end;
  else
   begin
     memw[VidSeg:((CurrY-1)*ScreenWidth+(CurrX-1))*2]:=(textattr shl 8) or byte(c);
     inc(CurrX);
   end;
  end;
  if CurrX>WinMaxX then
   begin
     CurrX:=WinMinX;
     inc(CurrY);
   end;
  while CurrY>WinMaxY do
   begin
     removeline(1);
     dec(CurrY);
   end;
end;


Function CrtWrite(var f : textrec):integer;
var
  i : longint;
begin
  GetScreenCursor(CurrX,CurrY);
  for i:=0 to f.bufpos-1 do
   WriteChar(f.buffer[i]);
  SetScreenCursor(CurrX,CurrY);
  f.bufpos:=0;
  CrtWrite:=0;
end;


Function CrtRead(Var F: TextRec): Integer;

  procedure BackSpace;
  begin
    if (f.bufpos>0) and (f.bufpos=f.bufend) then
     begin
       WriteChar(#8);
       WriteChar(' ');
       WriteChar(#8);
       dec(f.bufpos);
       dec(f.bufend);
     end;
  end;

var
  ch : Char;
Begin
  GetScreenCursor(CurrX,CurrY);
  f.bufpos:=0;
  f.bufend:=0;
  repeat
    if f.bufpos>f.bufend then
     f.bufend:=f.bufpos;
    SetScreenCursor(CurrX,CurrY);
    ch:=readkey;
    case ch of
    #0 : case readkey of
          #71 : while f.bufpos>0 do
                 begin
                   dec(f.bufpos);
                   WriteChar(#8);
                 end;
          #75 : if f.bufpos>0 then
                 begin
                   dec(f.bufpos);
                   WriteChar(#8);
                 end;
          #77 : if f.bufpos<f.bufend then
                 begin
                   WriteChar(f.bufptr^[f.bufpos]);
                   inc(f.bufpos);
                 end;
          #79 : while f.bufpos<f.bufend do
                 begin
                   WriteChar(f.bufptr^[f.bufpos]);
                   inc(f.bufpos);
                 end;
         end;
    ^S,
    #8 : BackSpace;
    ^Y,
   #27 : begin
           while f.bufpos<f.bufend do begin
            WriteChar(f.bufptr^[f.bufpos]);
            inc(f.bufpos);
           end;
           while f.bufend>0 do
            BackSpace;
         end;
   #13 : begin
           WriteChar(#13);
           WriteChar(#10);
           f.bufptr^[f.bufend]:=#13;
           f.bufptr^[f.bufend+1]:=#10;
           inc(f.bufend,2);
           break;
         end;
   #26 : if CheckEOF then
          begin
            f.bufptr^[f.bufend]:=#26;
            inc(f.bufend);
            break;
          end;
    else
     begin
       if f.bufpos<f.bufsize-2 then
        begin
          f.buffer[f.bufpos]:=ch;
          inc(f.bufpos);
          WriteChar(ch);
        end;
     end;
    end;
  until false;
  f.bufpos:=0;
  SetScreenCursor(CurrX,CurrY);
  CrtRead:=0;
End;


Function CrtReturn(Var F: TextRec): Integer;
Begin
  CrtReturn:=0;
end;


Function CrtClose(Var F: TextRec): Integer;
Begin
  F.Mode:=fmClosed;
  CrtClose:=0;
End;


Function CrtOpen(Var F: TextRec): Integer;
Begin
  If F.Mode=fmOutput Then
   begin
     TextRec(F).InOutFunc:=@CrtWrite;
     TextRec(F).FlushFunc:=@CrtWrite;
   end
  Else
   begin
     F.Mode:=fmInput;
     TextRec(F).InOutFunc:=@CrtRead;
     TextRec(F).FlushFunc:=@CrtReturn;
   end;
  TextRec(F).CloseFunc:=@CrtClose;
  CrtOpen:=0;
End;


procedure AssignCrt(var F: Text);
begin
  Assign(F,'');
  TextRec(F).OpenFunc:=@CrtOpen;
end;

{ use the C version to avoid using dpmiexcp unit
  which makes sysutils and exceptions working incorrectly  PM }

function __djgpp_set_ctrl_c(enable : longint) : boolean;cdecl;external;

var
  x,y : longint;
begin
{ Load startup values }
  ScreenWidth:=GetScreenWidth;
  ScreenHeight:=GetScreenHeight;
  WindMax:=(ScreenWidth-1) or ((ScreenHeight-1) shl 8);
{ Load TextAttr }
  GetScreenCursor(x,y);
  lastmode := mem[$40:$49];
  if screenheight>25 then
    lastmode:=lastmode or $100;
  If not(lastmode=Mono) then
    VidSeg := $b800
  else
    VidSeg := $b000;
  TextAttr:=mem[VidSeg:((y-1)*ScreenWidth+(x-1))*2+1];
{ Redirect the standard output }
  assigncrt(Output);
  Rewrite(Output);
  TextRec(Output).Handle:=StdOutputHandle;
  assigncrt(Input);
  Reset(Input);
  TextRec(Input).Handle:=StdInputHandle;
{ Calculates delay calibration }
  initdelay;
{ Enable ctrl-c input (JM) }
  __djgpp_set_ctrl_c(0);
end.