{
    $Id$
    This file is part of the Free Pascal run time library.
    Copyright (c) 1999-2000 by Michael Van Canneyt,
    member of the Free Pascal development team.

    See the file COPYING.FPC, included in this distribution,
    for details about the copyright.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

 **********************************************************************}

{ Include syscall itself }
{$i syscallo.inc}

{*****************************************************************************
               --- Time:Time handling related calls ---
*****************************************************************************}

Function Sys_Time:longint;
var
  regs : SysCallregs;
begin
  regs.reg2:=0;
  Sys_Time:=SysCall(SysCall_nr_time,regs);
end;


{*****************************************************************************
               --- File:File handling related calls ---
*****************************************************************************}


Function Sys_Open(f:pchar;flags:longint;mode:integer):longint;
var
  regs : SysCallregs;
Begin
  regs.reg2:=longint(f);
  regs.reg3:=flags;
  regs.reg4:=mode;
  Sys_Open:=SysCall(SysCall_nr_open,regs);
End;



Function Sys_Close(f:longint):longint;
var
  regs : SysCallregs;
begin
  regs.reg2:=f;
  Sys_Close:=SysCall(SysCall_nr_close,regs);
end;



Function Sys_Lseek(F:longint;Off:longint;Whence:longint):longint;
var
  regs : SysCallregs;
begin
  regs.reg2:=f;
  regs.reg3:=off;
  regs.reg4:=Whence;
  Sys_lseek:=SysCall(SysCall_nr_lseek,regs);
end;



Function Sys_Read(f:longint;buffer:pchar;count:longint):longint;
var
  regs : SysCallregs;
begin
  regs.reg2:=f;
  regs.reg3:=longint(buffer);
  regs.reg4:=count;
  Sys_Read:=SysCall(SysCall_nr_read,regs);
end;



Function Sys_Write(f:longint;buffer:pchar;count:longint):longint;
var
  regs : SysCallregs;
begin
  regs.reg2:=f;
  regs.reg3:=longint(buffer);
  regs.reg4:=count;
  Sys_Write:=SysCall(SysCall_nr_write,regs);
end;



Function Sys_Unlink(Filename:pchar):longint;
var
  regs : SysCallregs;
begin
  regs.reg2:=longint(filename);
  Sys_Unlink:=SysCall(SysCall_nr_unlink,regs);
end;


Function Sys_fstat(fd : longint;var Info:stat):Longint;
var
  regs : SysCallregs;
begin
  regs.reg2:=fd;
  regs.reg3:=longint(@Info);
  Sys_fStat:=SysCall(SysCall_nr_fstat,regs);
end;


Function Sys_Rename(Oldname,Newname:pchar):longint;
var
  regs : SysCallregs;
begin
  regs.reg2:=longint(oldname);
  regs.reg3:=longint(newname);
  Sys_Rename:=SysCall(SysCall_nr_rename,regs);
end;



Function Sys_Stat(Filename:pchar;var Buffer: stat):longint;
{
   We need this for getcwd
}
var
  regs : SysCallregs;
begin
  regs.reg2:=longint(filename);
  regs.reg3:=longint(@buffer);
  Sys_Stat:=SysCall(SysCall_nr_stat,regs);
end;


Function Sys_Symlink(oldname,newname:pchar):longint;
{
  We need this for erase
}
var
  regs : SysCallregs;
begin
  regs.reg2:=longint(oldname);
  regs.reg3:=longint(newname);
  Sys_symlink:=SysCall(SysCall_nr_symlink,regs);
end;


Function Sys_ReadLink(name,linkname:pchar;maxlen:longint):longint;
var
  regs : SysCallRegs;
begin
  regs.reg2:=longint(name);
  regs.reg3:=longint(linkname);
  regs.reg4:=maxlen;
  Sys_ReadLink:=SysCall(Syscall_nr_readlink,regs);
end;


{*****************************************************************************
               --- Directory:Directory related calls ---
*****************************************************************************}


Function Sys_Chdir(Filename:pchar):longint;
var
  regs : SysCallregs;

begin
  regs.reg2:=longint(filename);
  Sys_ChDir:=SysCall(SysCall_nr_chdir,regs);
end;



Function Sys_Mkdir(Filename:pchar;mode:longint):longint;
var
  regs : SysCallregs;
begin
  regs.reg2:=longint(filename);
  regs.reg3:=mode;
  Sys_MkDir:=SysCall(SysCall_nr_mkdir,regs);
end;



Function Sys_Rmdir(Filename:pchar):longint;
var
  regs : SysCallregs;
begin
  regs.reg2:=longint(filename);
  Sys_Rmdir:=SysCall(SysCall_nr_rmdir,regs);
end;



{ we need this for getcwd }
Function OpenDir(f:pchar):pdir;
var
  fd:integer;
  st:stat;
  ptr:pdir;
begin
  opendir:=nil;
  if sys_stat(f,st)<0 then
   exit;
{ Is it a dir ? }
  if not((st.mode and $f000)=$4000)then
   begin
     errno:=ESysENOTDIR;
     exit
   end;
{ Open it}
  fd:=sys_open(f,OPEN_RDONLY,438);
  if fd<0 then
   exit;
  new(ptr);
  if ptr=nil then
   exit;
  new(ptr^.buf);
  if ptr^.buf=nil then
   exit;
  ptr^.fd:=fd;
  ptr^.loc:=0;
  ptr^.size:=0;
  ptr^.dd_max:=sizeof(ptr^.buf^);
  opendir:=ptr;
end;



function CloseDir(p:pdir):integer;
begin
  closedir:=sys_close(p^.fd);
  dispose(p^.buf);
  dispose(p);
end;



Function Sys_ReadDir(p:pdir):pdirent;
var
  regs :SysCallregs;
  dummy:longint;
begin
  regs.reg3:=longint(p^.buf);
  regs.reg2:=p^.fd;
  regs.reg4:=1;
  dummy:=SysCall(SysCall_nr_readdir,regs);
{ the readdir system call returns the number of bytes written }
  if dummy=0 then
   sys_readdir:=nil
  else
   sys_readdir:=p^.buf
end;


{*****************************************************************************
        --- Process:Process & program handling - related calls ---
*****************************************************************************}

Function Sys_GetPid:LongInt;
var
  regs : SysCallregs;
begin
  Sys_GetPid:=SysCall(SysCall_nr_getpid,regs);
end;


Procedure Sys_Exit(ExitCode:Integer);
var
  regs : SysCallregs;
begin
  regs.reg2:=exitcode;
  SysCall(SysCall_nr_exit,regs)
end;

Procedure SigAction(Signum:longint;Act,OldAct:PSigActionRec );
{
  Change action of process upon receipt of a signal.
  Signum specifies the signal (all except SigKill and SigStop).
  If Act is non-nil, it is used to specify the new action.
  If OldAct is non-nil the previous action is saved there.
}
Var
  sr : Syscallregs;
begin
  sr.reg2:=Signum;
  sr.reg3:=Longint(act);
  sr.reg4:=Longint(oldact);
  SysCall(Syscall_nr_sigaction,sr);
end;

function Sys_FTruncate(Handle,Pos:longint):longint;  //moved from sysunix.inc Do_Truncate
var
  sr : syscallregs;
begin
  sr.reg2:=Handle;
  sr.reg3:=Pos;
  Sys_FTruncate:=syscall(syscall_nr_ftruncate,sr);
end;

Function Sys_mmap(adr,len,prot,flags,fdes,off:longint):longint; // moved from sysunix.inc, used in sbrk
type
  tmmapargs=packed record
    address : longint;
    size    : longint;
    prot    : longint;
    flags   : longint;
    fd      : longint;
    offset  : longint;
  end;
var
  t     : syscallregs;
  mmapargs : tmmapargs;
begin
  mmapargs.address:=adr;
  mmapargs.size:=len;
  mmapargs.prot:=prot;
  mmapargs.flags:=flags;
  mmapargs.fd:=fdes;
  mmapargs.offset:=off;
  t.reg2:=longint(@mmapargs);
  Sys_mmap:=syscall(syscall_nr_mmap,t);
end;

Function Sys_munmap(adr,len:longint):longint; // moved from sysunix.inc, used in sbrk
var
  t     : syscallregs;
begin
  t.reg2:=adr;
  t.reg3:=len;
  Sys_munmap:=syscall(syscall_nr_munmap,t);
end;


function Clone(func:TCloneFunc;sp:pointer;flags:longint;args:pointer):longint;
begin
  if (pointer(func)=nil) or (sp=nil) then
   exit(-1); // give an error result
{$ifdef i386}
  asm
        { Insert the argument onto the new stack. }
        movl    sp,%ecx
        subl    $8,%ecx
        movl    args,%eax
        movl    %eax,4(%ecx)

        { Save the function pointer as the zeroth argument.
          It will be popped off in the child in the ebx frobbing below. }
        movl    func,%eax
        movl    %eax,0(%ecx)

        { Do the system call }
        pushl   %ebx
        movl    flags,%ebx
        movl    SysCall_nr_clone,%eax
        int     $0x80
        popl    %ebx
        test    %eax,%eax
        jnz     .Lclone_end

        { We're in the new thread }
        subl    %ebp,%ebp       { terminate the stack frame }
        call    *%ebx
        { exit process }
        movl    %eax,%ebx
        movl    $1,%eax
        int     $0x80

.Lclone_end:
        movl    %eax,__RESULT
  end;
{$endif i386}
{$ifdef m68k}
  { No yet translated, my m68k assembler is too weak for such things PM }
(*
  asm
        { Insert the argument onto the new stack. }
        movl    sp,%ecx
        subl    $8,%ecx
        movl    args,%eax
        movl    %eax,4(%ecx)

        { Save the function pointer as the zeroth argument.
          It will be popped off in the child in the ebx frobbing below. }
        movl    func,%eax
        movl    %eax,0(%ecx)

        { Do the system call }
        pushl   %ebx
        movl    flags,%ebx
        movl    SysCall_nr_clone,%eax
        int     $0x80
        popl    %ebx
        test    %eax,%eax
        jnz     .Lclone_end

        { We're in the new thread }
        subl    %ebp,%ebp       { terminate the stack frame }
        call    *%ebx
        { exit process }
        movl    %eax,%ebx
        movl    $1,%eax
        int     $0x80

.Lclone_end:
        movl    %eax,__RESULT
  end;
  *)
{$endif m68k}
end;



{
  Interface to Unix ioctl call.
  Performs various operations on the filedescriptor Handle.
  Ndx describes the operation to perform.
  Data points to data needed for the Ndx function. The structure of this
  data is function-dependent.
}
Function Sys_IOCtl(Handle,Ndx: Longint;Data: Pointer):LongInt;  // This was missing here, instead hardcode in Do_IsDevice
var
  sr: SysCallRegs;
begin
  sr.reg2:=Handle;
  sr.reg3:=Ndx;
  sr.reg4:=Longint(Data);
  Sys_IOCtl:=SysCall(Syscall_nr_ioctl,sr);
end;


{
  $Log$
  Revision 1.17  2002-12-18 16:43:26  marco
   * new unix rtl, linux part.....

  Revision 1.16  2002/11/11 21:40:26  marco
   * rename syscall.inc -> syscallo.inc

  Revision 1.15  2002/10/14 19:39:17  peter
    * threads unit added for thread support

  Revision 1.14  2002/09/10 21:32:14  jonas
    + added "nop" after sc instruction, since normally in case of success,
      sc returns to the second instruction after itself

  Revision 1.13  2002/09/07 16:01:19  peter
    * old logs removed and tabs fixed

  Revision 1.12  2002/09/07 13:14:04  florian
    * hopefully final fix for ppc syscall BTW: The regX numbering is somehow messy

  Revision 1.11  2002/09/03 21:37:54  florian
    * hopefully final fix for ppc syscall

  Revision 1.10  2002/09/02 20:42:22  florian
    * another ppc syscall fix

  Revision 1.9  2002/09/02 20:03:20  florian
    * ppc syscall code fixed

  Revision 1.8  2002/08/19 18:24:05  jonas
    + ppc support for do_syscall

  Revision 1.7  2002/07/29 21:28:17  florian
    * several fixes to get further with linux/ppc system unit compilation

  Revision 1.6  2002/07/28 20:43:48  florian
    * several fixes for linux/powerpc
    * several fixes to MT

}