fpc/compiler/powerpc64/nppcmat.pas
2020-10-13 19:59:01 +00:00

431 lines
16 KiB
ObjectPascal

{
Copyright (c) 1998-2002 by Florian Klaempfl
Generate PowerPC assembler for math nodes
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
****************************************************************************
}
unit nppcmat;
{$I fpcdefs.inc}
interface
uses
node, nmat, ncgmat;
type
tppcmoddivnode = class(tmoddivnode)
function pass_1: tnode; override;
procedure pass_generate_code override;
end;
tppcshlshrnode = class(tshlshrnode)
procedure pass_generate_code override;
end;
tppcunaryminusnode = class(tunaryminusnode)
procedure pass_generate_code override;
end;
tppcnotnode = class(tcgnotnode)
procedure pass_generate_code override;
end;
implementation
uses
sysutils,
globtype, systems,constexp,
cutils, verbose, globals,
symconst, symdef,
aasmbase, aasmcpu, aasmtai,aasmdata,
defutil,
cgbase, cgutils, cgobj, hlcgobj, pass_1, pass_2,
ncon, procinfo, nbas, nld, nadd,
cpubase, cpuinfo,
ncgutil, cgcpu, rgobj;
{*****************************************************************************
TPPCMODDIVNODE
*****************************************************************************}
function tppcmoddivnode.pass_1: tnode;
var
statementnode : tstatementnode;
temp_left, temp_right : ttempcreatenode;
left_copy, right_copy : tnode;
block : tblocknode;
begin
result := nil;
(*
// this code replaces all mod nodes by the equivalent div/mul/sub sequence
// on node level, which might be advantageous when doing CSE on that level
// However, optimal modulo code for some cases (in particular a 'x mod 2^n-1'
// operation) can not be expressed using nodes, so this is commented out for now
if (nodetype = modn) then begin
block := internalstatements(statementnode);
temp_left := ctempcreatenode.create(left.resultdef, left.resultdef.size, tt_persistent, true);
addstatement(statementnode, temp_left);
addstatement(statementnode, cassignmentnode.create(ctemprefnode.create(temp_left), left.getcopy));
if (right.nodetype <> ordconstn) then begin
// implementated optimization: use temps to store the right value, otherwise
// it is calculated twice when simply copying it which might result in side
// effects
temp_right := ctempcreatenode.create(right.resultdef, right.resultdef.size, tt_persistent, true);
addstatement(statementnode, temp_right);
addstatement(statementnode, cassignmentnode.create(ctemprefnode.create(temp_right), right.getcopy));
addstatement(statementnode, cassignmentnode.create(ctemprefnode.create(temp_left),
caddnode.create(subn, ctemprefnode.create(temp_left),
caddnode.create(muln, cmoddivnode.create(divn, ctemprefnode.create(temp_left), ctemprefnode.create(temp_right)),
ctemprefnode.create(temp_right)))));
addstatement(statementnode, ctempdeletenode.create(temp_right));
end else begin
// in case this is a modulo by a constant operation, do not use a temp for the
// right hand side, because otherwise the div optimization will not recognize this
// fact (and there is no constant propagator/recognizer in the compiler),
// resulting in suboptimal code.
addstatement(statementnode, cassignmentnode.create(ctemprefnode.create(temp_left),
caddnode.create(subn, ctemprefnode.create(temp_left),
caddnode.create(muln, cmoddivnode.create(divn, ctemprefnode.create(temp_left), right.getcopy),
right.getcopy))));
end;
addstatement(statementnode, ctempdeletenode.create_normal_temp(temp_left));
addstatement(statementnode, ctemprefnode.create(temp_left));
result := block;
end;
*)
if (not assigned(result)) then
result := inherited pass_1;
if not assigned(result) then
include(current_procinfo.flags, pi_do_call);
end;
procedure tppcmoddivnode.pass_generate_code;
const { signed overflow }
divops: array[boolean, boolean] of tasmop =
((A_DIVDU, A_DIVDU_),(A_DIVD, A_DIVDO_));
divcgops : array[boolean] of TOpCG = (OP_DIV, OP_IDIV);
zerocond: tasmcond = (dirhint: DH_Plus; simple: true; cond:C_NE; cr: RS_CR7);
tcgsize2native : array[OS_8..OS_S128] of tcgsize = (
OS_64, OS_64, OS_64, OS_64, OS_NO,
OS_S64, OS_S64, OS_S64, OS_S64, OS_NO
);
var
power : longint;
op : tasmop;
numerator, divider,
resultreg : tregister;
size : TCgSize;
hl : tasmlabel;
done: boolean;
procedure genOrdConstNodeMod;
var
modreg, maskreg, tempreg : tregister;
isNegPower : boolean;
begin
if (tordconstnode(right).value = 0) then begin
internalerror(2005061702);
end else if (abs(tordconstnode(right).value.svalue) = 1) then begin
{ x mod +/-1 is always zero }
cg.a_load_const_reg(current_asmdata.CurrAsmList, OS_INT, 0, resultreg);
end else if (ispowerof2(tordconstnode(right).value, power)) then begin
if (is_signed(right.resultdef)) then begin
tempreg := cg.getintregister(current_asmdata.CurrAsmList, OS_INT);
maskreg := cg.getintregister(current_asmdata.CurrAsmList, OS_INT);
modreg := cg.getintregister(current_asmdata.CurrAsmList, OS_INT);
cg.a_load_const_reg(current_asmdata.CurrAsmList, OS_INT, abs(tordconstnode(right).value.svalue)-1, modreg);
cg.a_op_const_reg_reg(current_asmdata.CurrAsmList, OP_SAR, OS_INT, 63, numerator, maskreg);
cg.a_op_reg_reg_reg(current_asmdata.CurrAsmList, OP_AND, OS_INT, numerator, modreg, tempreg);
current_asmdata.CurrAsmList.concat(taicpu.op_reg_reg_reg(A_ANDC, maskreg, maskreg, modreg));
current_asmdata.CurrAsmList.concat(taicpu.op_reg_reg_const(A_SUBFIC, modreg, tempreg, 0));
current_asmdata.CurrAsmList.concat(taicpu.op_reg_reg_reg(A_SUBFE, modreg, modreg, modreg));
cg.a_op_reg_reg_reg(current_asmdata.CurrAsmList, OP_AND, OS_INT, modreg, maskreg, maskreg);
cg.a_op_reg_reg_reg(current_asmdata.CurrAsmList, OP_OR, OS_INT, maskreg, tempreg, resultreg);
end else begin
cg.a_op_const_reg_reg(current_asmdata.CurrAsmList, OP_AND, OS_INT, tordconstnode(right).value-1, numerator,
resultreg);
end;
end else begin
cg.a_op_const_reg_reg(current_asmdata.CurrAsmList, divCgOps[is_signed(right.resultdef)], OS_INT,
tordconstnode(right).value.svalue, numerator, resultreg);
cg.a_op_const_reg_reg(current_asmdata.CurrAsmList, OP_MUL, OS_INT, tordconstnode(right).value.svalue, resultreg,
resultreg);
cg.a_op_reg_reg_reg(current_asmdata.CurrAsmList, OP_SUB, OS_INT, resultreg, numerator, resultreg);
end;
end;
begin
secondpass(left);
secondpass(right);
location_copy(location,left.location);
{ put numerator in register }
size:=def_cgsize(left.resultdef);
hlcg.location_force_reg(current_asmdata.CurrAsmList,left.location,
left.resultdef,left.resultdef,true);
location_copy(location,left.location);
numerator := location.register;
resultreg := location.register;
if (location.loc = LOC_CREGISTER) then begin
location.loc := LOC_REGISTER;
location.register := cg.getintregister(current_asmdata.CurrAsmList,size);
resultreg := location.register;
end else if (nodetype = modn) or (right.nodetype = ordconstn) then begin
{ for a modulus op, and for const nodes we need the result register
to be an extra register }
resultreg := cg.getintregister(current_asmdata.CurrAsmList,size);
end;
done := false;
if (cs_opt_level1 in current_settings.optimizerswitches) and (right.nodetype = ordconstn) then begin
if (nodetype = divn) then
cg.a_op_const_reg_reg(current_asmdata.CurrAsmList, divCgOps[is_signed(right.resultdef)],
size, tordconstnode(right).value.svalue, numerator, resultreg)
else
genOrdConstNodeMod;
done := true;
end;
if (not done) then begin
{ load divider in a register if necessary }
hlcg.location_force_reg(current_asmdata.CurrAsmList,right.location,right.resultdef,right.resultdef,true);
if (right.nodetype <> ordconstn) then
current_asmdata.CurrAsmList.concat(taicpu.op_reg_reg_const(A_CMPDI, NR_CR7,
right.location.register, 0))
else begin
if (tordconstnode(right).value = 0) then
internalerror(2005100301);
end;
divider := right.location.register;
{ select the correct opcode according to the sign of the result, whether we need
overflow checking }
op := divops[is_signed(right.resultdef), cs_check_overflow in current_settings.localswitches];
current_asmdata.CurrAsmList.concat(taicpu.op_reg_reg_reg(op, resultreg, numerator,
divider));
if (nodetype = modn) then begin
{ multiply with the divisor again, taking care of the correct size }
current_asmdata.CurrAsmList.concat(taicpu.op_reg_reg_reg(A_MULLD,resultreg,
divider,resultreg));
current_asmdata.CurrAsmList.concat(taicpu.op_reg_reg_reg(A_SUB,location.register,
numerator,resultreg));
resultreg := location.register;
end;
end;
{ set result location }
location.loc:=LOC_REGISTER;
location.register:=resultreg;
if right.nodetype <> ordconstn then begin
current_asmdata.getjumplabel(hl);
current_asmdata.CurrAsmList.concat(taicpu.op_cond_sym(A_BC,zerocond,hl));
cg.a_call_name(current_asmdata.CurrAsmList,'FPC_DIVBYZERO',false);
cg.a_label(current_asmdata.CurrAsmList,hl);
end;
{ unsigned division/module can only overflow in case of division by zero
(but checking this overflow flag is more convoluted than performing a
simple comparison with 0) }
if is_signed(right.resultdef) then
cg.g_overflowcheck(current_asmdata.CurrAsmList,location,resultdef);
end;
{*****************************************************************************
TPPCSHLRSHRNODE
*****************************************************************************}
procedure tppcshlshrnode.pass_generate_code;
var
resultreg, hregister1, hregister2 : tregister;
op: topcg;
asmop1, asmop2: tasmop;
shiftval: aint;
begin
secondpass(left);
secondpass(right);
{ load left operators in a register }
hlcg.location_force_reg(current_asmdata.CurrAsmList, left.location,
left.resultdef, left.resultdef, true);
location_copy(location, left.location);
resultreg := location.register;
hregister1 := location.register;
if (location.loc = LOC_CREGISTER) then begin
location.loc := LOC_REGISTER;
resultreg := cg.getintregister(current_asmdata.CurrAsmList, OS_INT);
location.register := resultreg;
end;
{ determine operator }
if nodetype = shln then
op := OP_SHL
else
op := OP_SHR;
{ shifting by a constant directly coded: }
if (right.nodetype = ordconstn) then begin
// result types with size < 32 bits have their shift values masked
// differently... :/
shiftval := tordconstnode(right).value and (tcgsize2size[def_cgsize(resultdef)] * 8 -1);
cg.a_op_const_reg_reg(current_asmdata.CurrAsmList, op, def_cgsize(resultdef),
shiftval, hregister1, resultreg)
end else begin
{ load shift count in a register if necessary }
hlcg.location_force_reg(current_asmdata.CurrAsmList, right.location,
right.resultdef, right.resultdef, true);
hregister2 := right.location.register;
cg.a_op_reg_reg_reg(current_asmdata.CurrAsmList, op, def_cgsize(resultdef), hregister2,
hregister1, resultreg);
end;
end;
{*****************************************************************************
TPPCUNARYMINUSNODE
*****************************************************************************}
procedure tppcunaryminusnode.pass_generate_code;
var
src1: tregister;
op: tasmop;
begin
secondpass(left);
begin
if left.location.loc in [LOC_SUBSETREG,LOC_CSUBSETREG,LOC_SUBSETREF,LOC_CSUBSETREF] then
hlcg.location_force_reg(current_asmdata.CurrAsmList,left.location,left.resultdef,left.resultdef,true);
location_copy(location, left.location);
location.loc := LOC_REGISTER;
case left.location.loc of
LOC_FPUREGISTER, LOC_REGISTER:
begin
src1 := left.location.register;
location.register := src1;
end;
LOC_CFPUREGISTER, LOC_CREGISTER:
begin
src1 := left.location.register;
if left.location.loc = LOC_CREGISTER then
location.register := cg.getintregister(current_asmdata.CurrAsmList, OS_INT)
else
location.register := cg.getfpuregister(current_asmdata.CurrAsmList, location.size);
end;
LOC_REFERENCE, LOC_CREFERENCE:
begin
if (left.resultdef.typ = floatdef) then begin
src1 := cg.getfpuregister(current_asmdata.CurrAsmList,
left.location.size);
location.register := src1;
cg.a_loadfpu_ref_reg(current_asmdata.CurrAsmList,
left.location.size,left.location.size,
left.location.reference, src1);
end else begin
src1 := cg.getintregister(current_asmdata.CurrAsmList, OS_64);
location.register := src1;
cg.a_load_ref_reg(current_asmdata.CurrAsmList, OS_64, OS_64,
left.location.reference, src1);
end;
end;
else
internalerror(2013120113);
end;
{ choose appropriate operand }
if left.resultdef.typ <> floatdef then begin
if not (cs_check_overflow in current_settings.localswitches) then
op := A_NEG
else
op := A_NEGO_;
location.loc := LOC_REGISTER;
end else begin
op := A_FNEG;
location.loc := LOC_FPUREGISTER;
end;
{ emit operation }
current_asmdata.CurrAsmList.concat(taicpu.op_reg_reg(op, location.register, src1));
end;
cg.g_overflowcheck(current_asmdata.CurrAsmList, location, resultdef);
end;
{*****************************************************************************
TPPCNOTNODE
*****************************************************************************}
procedure tppcnotnode.pass_generate_code;
begin
secondpass(left);
if is_boolean(resultdef) then
begin
if not handle_locjump then
begin
{ handle_locjump does call secondpass }
case left.location.loc of
LOC_FLAGS:
begin
location_copy(location, left.location);
inverse_flags(location.resflags);
end;
LOC_REGISTER, LOC_CREGISTER,
LOC_REFERENCE, LOC_CREFERENCE,
LOC_SUBSETREG, LOC_CSUBSETREG,
LOC_SUBSETREF, LOC_CSUBSETREF:
begin
hlcg.location_force_reg(current_asmdata.CurrAsmList, left.location,
left.resultdef, left.resultdef, true);
current_asmdata.CurrAsmList.concat(taicpu.op_reg_const(A_CMPDI,
left.location.register, 0));
location_reset(location, LOC_FLAGS, OS_NO);
location.resflags.cr := RS_CR0;
location.resflags.flag := F_EQ;
end;
else
internalerror(2003042401);
end;
end;
end
else
begin
hlcg.location_force_reg(current_asmdata.CurrAsmList, left.location,
left.resultdef, left.resultdef, true);
location_copy(location, left.location);
location.loc := LOC_REGISTER;
location.register := cg.getintregister(current_asmdata.CurrAsmList, OS_INT);
{ perform the NOT operation }
cg.a_op_reg_reg(current_asmdata.CurrAsmList, OP_NOT, def_cgsize(resultdef),
left.location.register,
location.register);
end;
end;
begin
cmoddivnode := tppcmoddivnode;
cshlshrnode := tppcshlshrnode;
cunaryminusnode := tppcunaryminusnode;
cnotnode := tppcnotnode;
end.