fpc/compiler/i386/cpupara.pas
peter 8cf8c54609 * fixed varargs
* replaced dynarray with tlist
2004-11-22 22:01:19 +00:00

573 lines
20 KiB
ObjectPascal

{
$Id$
Copyright (c) 2002 by Florian Klaempfl
Generates the argument location information for i386
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published bymethodpointer
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
****************************************************************************
}
unit cpupara;
{$i fpcdefs.inc}
interface
uses
cclasses,globtype,
aasmtai,cpubase,cgbase,
symconst,symtype,symsym,symdef,
parabase,paramgr;
type
ti386paramanager = class(tparamanager)
function ret_in_param(def : tdef;calloption : tproccalloption) : boolean;override;
function push_addr_param(varspez:tvarspez;def : tdef;calloption : tproccalloption) : boolean;override;
function get_para_align(calloption : tproccalloption):byte;override;
function get_volatile_registers_int(calloption : tproccalloption):tcpuregisterset;override;
function get_volatile_registers_fpu(calloption : tproccalloption):tcpuregisterset;override;
function get_volatile_registers_mm(calloption : tproccalloption):tcpuregisterset;override;
{ Returns the location for the nr-st 32 Bit int parameter
if every parameter before is an 32 Bit int parameter as well
and if the calling conventions for the helper routines of the
rtl are used.
}
procedure getintparaloc(calloption : tproccalloption; nr : longint;var cgpara:TCGPara);override;
function create_paraloc_info(p : tabstractprocdef; side: tcallercallee):longint;override;
function create_varargs_paraloc_info(p : tabstractprocdef; varargspara:tvarargsparalist):longint;override;
procedure createtempparaloc(list: taasmoutput;calloption : tproccalloption;parasym : tparavarsym;var cgpara:TCGPara);override;
private
procedure create_funcretloc_info(p : tabstractprocdef; side: tcallercallee);
procedure create_stdcall_paraloc_info(p : tabstractprocdef; side: tcallercallee;paras:tparalist;var parasize:longint);
procedure create_register_paraloc_info(p : tabstractprocdef; side: tcallercallee;paras:tparalist;var parareg,parasize:longint);
end;
implementation
uses
cutils,
systems,verbose,
defutil,
cgutils;
const
parasupregs : array[0..2] of tsuperregister = (RS_EAX,RS_EDX,RS_ECX);
{****************************************************************************
TI386PARAMANAGER
****************************************************************************}
function ti386paramanager.ret_in_param(def : tdef;calloption : tproccalloption) : boolean;
begin
case target_info.system of
system_i386_win32 :
begin
case def.deftype of
recorddef :
begin
{ Win32 GCC returns small records in the FUNCTION_RETURN_REG.
For stdcall we follow delphi instead of GCC }
if (calloption in [pocall_cdecl,pocall_cppdecl]) and
(def.size<=8) then
begin
result:=false;
exit;
end;
end;
end;
end;
end;
result:=inherited ret_in_param(def,calloption);
end;
function ti386paramanager.push_addr_param(varspez:tvarspez;def : tdef;calloption : tproccalloption) : boolean;
begin
case target_info.system of
system_i386_win32 :
begin
case def.deftype of
recorddef :
begin
{ Win32 passes small records on the stack for call by
value }
if (calloption in [pocall_stdcall,pocall_cdecl,pocall_cppdecl]) and
(varspez=vs_value) and
(def.size<=8) then
begin
result:=false;
exit;
end;
end;
arraydef :
begin
{ Win32 passes arrays on the stack for call by
value }
if (calloption in [pocall_stdcall,pocall_cdecl,pocall_cppdecl]) and
(varspez=vs_value) and
(tarraydef(def).highrange>=tarraydef(def).lowrange) then
begin
result:=true;
exit;
end;
end;
end;
end;
end;
result:=inherited push_addr_param(varspez,def,calloption);
end;
function ti386paramanager.get_para_align(calloption : tproccalloption):byte;
begin
if calloption=pocall_oldfpccall then
begin
if target_info.system in [system_i386_go32v2,system_i386_watcom] then
result:=2
else
result:=4;
end
else
result:=std_param_align;
end;
function ti386paramanager.get_volatile_registers_int(calloption : tproccalloption):tcpuregisterset;
begin
case calloption of
pocall_internproc :
result:=[];
pocall_compilerproc :
begin
if pocall_default=pocall_oldfpccall then
result:=[RS_EAX,RS_EDX,RS_ECX,RS_ESI,RS_EDI,RS_EBX]
else
result:=[RS_EAX,RS_EDX,RS_ECX];
end;
pocall_inline,
pocall_register,
pocall_safecall,
pocall_stdcall,
pocall_cdecl,
pocall_cppdecl :
result:=[RS_EAX,RS_EDX,RS_ECX];
pocall_far16,
pocall_pascal,
pocall_oldfpccall :
result:=[RS_EAX,RS_EDX,RS_ECX,RS_ESI,RS_EDI,RS_EBX];
else
internalerror(200309071);
end;
end;
function ti386paramanager.get_volatile_registers_fpu(calloption : tproccalloption):tcpuregisterset;
begin
result:=[0..first_fpu_imreg-1];
end;
function ti386paramanager.get_volatile_registers_mm(calloption : tproccalloption):tcpuregisterset;
begin
result:=[0..first_mm_imreg-1];
end;
procedure ti386paramanager.getintparaloc(calloption : tproccalloption; nr : longint;var cgpara:TCGPara);
var
paraloc : pcgparalocation;
begin
cgpara.reset;
cgpara.size:=OS_INT;
cgpara.alignment:=get_para_align(calloption);
paraloc:=cgpara.add_location;
with paraloc^ do
begin
size:=OS_INT;
if calloption=pocall_register then
begin
if (nr<=high(parasupregs)+1) then
begin
if nr=0 then
internalerror(200309271);
loc:=LOC_REGISTER;
register:=newreg(R_INTREGISTER,parasupregs[nr-1],R_SUBWHOLE);
end
else
begin
loc:=LOC_REFERENCE;
reference.index:=NR_STACK_POINTER_REG;
reference.offset:=sizeof(aint)*nr;
end;
end
else
begin
loc:=LOC_REFERENCE;
reference.index:=NR_STACK_POINTER_REG;
reference.offset:=sizeof(aint)*nr;
end;
end;
end;
procedure ti386paramanager.create_funcretloc_info(p : tabstractprocdef; side: tcallercallee);
var
retcgsize : tcgsize;
begin
{ Constructors return self instead of a boolean }
if (p.proctypeoption=potype_constructor) then
retcgsize:=OS_ADDR
else
retcgsize:=def_cgsize(p.rettype.def);
location_reset(p.funcretloc[side],LOC_INVALID,OS_NO);
{ void has no location }
if is_void(p.rettype.def) then
begin
location_reset(p.funcretloc[side],LOC_VOID,OS_NO);
exit;
end;
{ Return in FPU register? }
if p.rettype.def.deftype=floatdef then
begin
p.funcretloc[side].loc:=LOC_FPUREGISTER;
p.funcretloc[side].register:=NR_FPU_RESULT_REG;
p.funcretloc[side].size:=retcgsize;
end
else
{ Return in register? }
if not ret_in_param(p.rettype.def,p.proccalloption) then
begin
if retcgsize in [OS_64,OS_S64] then
begin
{ low 32bits }
p.funcretloc[side].loc:=LOC_REGISTER;
p.funcretloc[side].size:=OS_64;
if side=callerside then
p.funcretloc[side].register64.reglo:=NR_FUNCTION_RESULT64_LOW_REG
else
p.funcretloc[side].register64.reglo:=NR_FUNCTION_RETURN64_LOW_REG;
{ high 32bits }
if side=callerside then
p.funcretloc[side].register64.reghi:=NR_FUNCTION_RESULT64_HIGH_REG
else
p.funcretloc[side].register64.reghi:=NR_FUNCTION_RETURN64_HIGH_REG;
end
else
begin
p.funcretloc[side].loc:=LOC_REGISTER;
p.funcretloc[side].size:=retcgsize;
if side=callerside then
p.funcretloc[side].register:=newreg(R_INTREGISTER,RS_FUNCTION_RESULT_REG,cgsize2subreg(retcgsize))
else
p.funcretloc[side].register:=newreg(R_INTREGISTER,RS_FUNCTION_RETURN_REG,cgsize2subreg(retcgsize));
end;
end
else
begin
p.funcretloc[side].loc:=LOC_REFERENCE;
p.funcretloc[side].size:=retcgsize;
end;
end;
procedure ti386paramanager.create_stdcall_paraloc_info(p : tabstractprocdef; side: tcallercallee;paras:tparalist;var parasize:longint);
var
i : integer;
hp : tparavarsym;
paraloc : pcgparalocation;
l,
varalign,
paraalign : longint;
paracgsize : tcgsize;
begin
paraalign:=get_para_align(p.proccalloption);
{ we push Flags and CS as long
to cope with the IRETD
and we save 6 register + 4 selectors }
if po_interrupt in p.procoptions then
inc(parasize,8+6*4+4*2);
{ Offset is calculated like:
sub esp,12
mov [esp+8],para3
mov [esp+4],para2
mov [esp],para1
call function
That means for pushes the para with the
highest offset (see para3) needs to be pushed first
}
for i:=0 to paras.count-1 do
begin
hp:=tparavarsym(paras[i]);
if push_addr_param(hp.varspez,hp.vartype.def,p.proccalloption) then
paracgsize:=OS_ADDR
else
begin
paracgsize:=def_cgSize(hp.vartype.def);
if paracgsize=OS_NO then
paracgsize:=OS_ADDR;
end;
hp.paraloc[side].reset;
hp.paraloc[side].size:=paracgsize;
hp.paraloc[side].Alignment:=paraalign;
paraloc:=hp.paraloc[side].add_location;
paraloc^.loc:=LOC_REFERENCE;
paraloc^.size:=paracgsize;
if side=callerside then
paraloc^.reference.index:=NR_STACK_POINTER_REG
else
paraloc^.reference.index:=NR_FRAME_POINTER_REG;
l:=push_size(hp.varspez,hp.vartype.def,p.proccalloption);
varalign:=used_align(size_2_align(l),paraalign,paraalign);
paraloc^.reference.offset:=parasize;
parasize:=align(parasize+l,varalign);
end;
{ Adapt offsets for left-to-right calling }
if p.proccalloption in pushleftright_pocalls then
begin
for i:=0 to paras.count-1 do
begin
hp:=tparavarsym(paras[i]);
l:=push_size(hp.varspez,hp.vartype.def,p.proccalloption);
varalign:=used_align(size_2_align(l),paraalign,paraalign);
l:=align(l,varalign);
with hp.paraloc[side].location^ do
begin
reference.offset:=parasize-reference.offset-l;
if side=calleeside then
inc(reference.offset,target_info.first_parm_offset);
end;
end;
end
else
begin
{ Only need to adapt the callee side to include the
standard stackframe size }
if side=calleeside then
begin
for i:=0 to paras.count-1 do
begin
hp:=tparavarsym(paras[i]);
inc(hp.paraloc[side].location^.reference.offset,target_info.first_parm_offset);
end;
end;
end;
end;
procedure ti386paramanager.create_register_paraloc_info(p : tabstractprocdef; side: tcallercallee;paras:tparalist;
var parareg,parasize:longint);
var
hp : tparavarsym;
paraloc : pcgparalocation;
pushaddr,
is_64bit : boolean;
paracgsize : tcgsize;
i : integer;
l,
varalign,
paraalign : longint;
begin
paraalign:=get_para_align(p.proccalloption);
{ Register parameters are assigned from left to right }
for i:=0 to paras.count-1 do
begin
hp:=tparavarsym(paras[i]);
pushaddr:=push_addr_param(hp.varspez,hp.vartype.def,p.proccalloption);
if pushaddr then
paracgsize:=OS_ADDR
else
paracgsize:=def_cgsize(hp.vartype.def);
is_64bit:=(paracgsize in [OS_64,OS_S64,OS_F64]);
hp.paraloc[side].reset;
hp.paraloc[side].size:=paracgsize;
hp.paraloc[side].Alignment:=paraalign;
{
EAX
EDX
ECX
Stack
Stack
64bit values,floats,arrays and records are always
on the stack.
}
paraloc:=hp.paraloc[side].add_location;
paraloc^.size:=paracgsize;
if (parareg<=high(parasupregs)) and
not(
is_64bit or
((hp.vartype.def.deftype in [floatdef,recorddef,arraydef]) and
(not pushaddr))
) then
begin
paraloc^.loc:=LOC_REGISTER;
paraloc^.register:=newreg(R_INTREGISTER,parasupregs[parareg],cgsize2subreg(paracgsize));
inc(parareg);
end
else
begin
paraloc^.loc:=LOC_REFERENCE;
if side=callerside then
paraloc^.reference.index:=NR_STACK_POINTER_REG
else
paraloc^.reference.index:=NR_FRAME_POINTER_REG;
l:=push_size(hp.varspez,hp.vartype.def,p.proccalloption);
varalign:=size_2_align(l);
paraloc^.reference.offset:=parasize;
varalign:=used_align(varalign,paraalign,paraalign);
parasize:=align(parasize+l,varalign);
end;
end;
{ Register parameters are assigned from left-to-right, adapt offset
for calleeside to be reversed }
for i:=0 to paras.count-1 do
begin
hp:=tparavarsym(paras[i]);
with hp.paraloc[side].location^ do
begin
if (loc=LOC_REFERENCE) then
begin
l:=push_size(hp.varspez,hp.vartype.def,p.proccalloption);
varalign:=used_align(size_2_align(l),paraalign,paraalign);
l:=align(l,varalign);
reference.offset:=parasize-reference.offset-l;
if side=calleeside then
inc(reference.offset,target_info.first_parm_offset);
end;
end;
end;
end;
function ti386paramanager.create_paraloc_info(p : tabstractprocdef; side: tcallercallee):longint;
var
parasize,
parareg : longint;
begin
parasize:=0;
parareg:=0;
case p.proccalloption of
pocall_register :
create_register_paraloc_info(p,side,p.paras,parareg,parasize);
pocall_inline,
pocall_compilerproc,
pocall_internproc :
begin
{ Use default calling }
if (pocall_default=pocall_register) then
create_register_paraloc_info(p,side,p.paras,parareg,parasize)
else
create_stdcall_paraloc_info(p,side,p.paras,parasize);
end;
else
create_stdcall_paraloc_info(p,side,p.paras,parasize);
end;
create_funcretloc_info(p,side);
result:=parasize;
end;
function ti386paramanager.create_varargs_paraloc_info(p : tabstractprocdef; varargspara:tvarargsparalist):longint;
var
parasize : longint;
begin
parasize:=0;
{ calculate the registers for the normal parameters }
create_stdcall_paraloc_info(p,callerside,p.paras,parasize);
{ append the varargs }
create_stdcall_paraloc_info(p,callerside,varargspara,parasize);
result:=parasize;
end;
procedure ti386paramanager.createtempparaloc(list: taasmoutput;calloption : tproccalloption;parasym : tparavarsym;var cgpara:TCGPara);
var
paraloc : pcgparalocation;
begin
paraloc:=parasym.paraloc[callerside].location;
{ No need for temps when value is pushed }
if assigned(paraloc) and
(paraloc^.loc=LOC_REFERENCE) and
(paraloc^.reference.index=NR_STACK_POINTER_REG) then
duplicateparaloc(list,calloption,parasym,cgpara)
else
inherited createtempparaloc(list,calloption,parasym,cgpara);
end;
begin
paramanager:=ti386paramanager.create;
end.
{
$Log$
Revision 1.60 2004-11-22 22:01:19 peter
* fixed varargs
* replaced dynarray with tlist
Revision 1.59 2004/11/21 17:54:59 peter
* ttempcreatenode.create_reg merged into .create with parameter
whether a register is allowed
* funcret_paraloc renamed to funcretloc
Revision 1.58 2004/11/21 17:17:04 florian
* changed funcret location back to tlocation
Revision 1.57 2004/11/15 23:35:31 peter
* tparaitem removed, use tparavarsym instead
* parameter order is now calculated from paranr value in tparavarsym
Revision 1.56 2004/10/31 21:45:03 peter
* generic tlocation
* move tlocation to cgutils
Revision 1.55 2004/09/21 17:25:12 peter
* paraloc branch merged
Revision 1.54.4.1 2004/08/31 20:43:06 peter
* paraloc patch
Revision 1.54 2004/07/09 23:30:13 jonas
* changed first_sse_imreg to first_mm_imreg
Revision 1.53 2004/07/09 23:09:02 peter
* varargs calculation fixed, it's now the same as the other
targets
Revision 1.52 2004/06/20 08:55:31 florian
* logs truncated
Revision 1.51 2004/06/16 20:07:10 florian
* dwarf branch merged
Revision 1.50.2.3 2004/05/02 21:37:35 florian
* setting of func. ret. for i386 fixed
Revision 1.50.2.2 2004/05/02 12:45:32 peter
* enabled cpuhasfixedstack for x86-64 again
* fixed size of temp allocation for parameters
Revision 1.50.2.1 2004/05/01 16:02:10 peter
* POINTER_SIZE replaced with sizeof(aint)
* aint,aword,tconst*int moved to globtype
Revision 1.50 2004/02/09 22:14:17 peter
* more x86_64 parameter fixes
* tparalocation.lochigh is now used to indicate if register64.reghi
is used and what the type is
}