paweld/fpc
1
0
Fork 0
mirror of https://gitlab.com/freepascal.org/fpc/source.git synced 2025-06-07 01:58:44 +02:00
Code Issues Packages Projects Releases Wiki Activity
2b70c64d09
fpc/compiler/x86/aasmcpu.pas
Jonas Maebe 9bd33f7a45 + support for LLVM metadata constant string parameters 
o they are implemented as a new metadata register class, whereby the
     subregister indicates the metadata type (currently always a string)
     and the superregister is an index in the metadata array (which
     contains the strings). LLVM metadata can only be passed as parameters
     to intrinsics in bitcode, so moves of metadata into other registers
     triggers internal errors and when moving them into parameters, we
     replace the parameter's register with the metadata register (and look
     up the corresponding string when writing out the bitcode)

git-svn-id: trunk@43816 -
2019-12-30 15:04:57 +00:00

5542 lines
196 KiB
ObjectPascal
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

{
Copyright (c) 1998-2002 by Florian Klaempfl and Peter Vreman
Contains the abstract assembler implementation for the i386
* Portions of this code was inspired by the NASM sources
The Netwide Assembler is Copyright (c) 1996 Simon Tatham and
Julian Hall. All rights reserved.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
****************************************************************************
}
unit aasmcpu;
{$i fpcdefs.inc}
interface
uses
globtype,verbose,
cpubase,
cgbase,cgutils,
aasmbase,aasmtai,aasmsym,
ogbase;
const
{ "mov reg,reg" source operand number }
O_MOV_SOURCE = 0;
{ "mov reg,reg" destination operand number }
O_MOV_DEST = 1;
{ Operand types }
OT_NONE = $00000000;
{ Bits 0..7: sizes }
OT_BITS8 = $00000001;
OT_BITS16 = $00000002;
OT_BITS32 = $00000004;
OT_BITS64 = $00000008; { x86_64 and FPU }
//OT_BITS128 = $10000000; { 16 byte SSE }
//OT_BITS256 = $20000000; { 32 byte AVX }
//OT_BITS512 = $40000000; { 64 byte AVX512 }
OT_BITS128 = $20000000; { 16 byte SSE }
OT_BITS256 = $40000000; { 32 byte AVX }
OT_BITS512 = $80000000; { 64 byte AVX512 }
OT_VECTORMASK = $1000000000; { OPTIONAL VECTORMASK AVX512}
OT_VECTORZERO = $2000000000; { OPTIONAL ZERO-FLAG AVX512}
OT_VECTORBCST = $4000000000; { BROADCAST-MEM-FLAG AVX512}
OT_VECTORSAE = $8000000000; { OPTIONAL SAE-FLAG AVX512}
OT_VECTORER = $10000000000; { OPTIONAL ER-FLAG-FLAG AVX512}
OT_VECTOR_EXT = OT_VECTORMASK or OT_VECTORZERO or OT_VECTORBCST or OT_VECTORSAE or OT_VECTORER;
OT_BITSB32 = OT_BITS32 or OT_VECTORBCST;
OT_BITSB64 = OT_BITS64 or OT_VECTORBCST;
OT_BITS80 = $00000010; { FPU only }
OT_FAR = $00000020; { this means 16:16 or 16:32, like in CALL/JMP }
OT_NEAR = $00000040;
OT_SHORT = $00000080;
{ TODO: FAR/NEAR/SHORT are sizes too, they should be included into size mask,
but this requires adjusting the opcode table }
//OT_SIZE_MASK = $3000001F; { all the size attributes }
OT_SIZE_MASK = $E000001F; { all the size attributes }
OT_NON_SIZE = longint(not(longint(OT_SIZE_MASK)));
{ Bits 8..11: modifiers }
OT_SIGNED = $00000100; { the operand need to be signed -128-127 }
OT_TO = $00000200; { reverse effect in FADD, FSUB &c }
OT_COLON = $00000400; { operand is followed by a colon }
OT_MODIFIER_MASK = $00000F00;
{ Bits 12..15: type of operand }
OT_REGISTER = $00001000;
OT_IMMEDIATE = $00002000;
OT_MEMORY = $0000C000; { always includes 'OT_REGMEM' bit as well }
OT_REGMEM = $00008000; { for r/m, ie EA, operands }
OT_TYPE_MASK = OT_REGISTER or OT_IMMEDIATE or OT_MEMORY or OT_REGMEM;
OT_REGNORM = OT_REGISTER or OT_REGMEM; { 'normal' reg, qualifies as EA }
{ Bits 20..22, 24..26: register classes
otf_* consts are not used alone, only to build other constants. }
otf_reg_cdt = $00100000;
otf_reg_gpr = $00200000;
otf_reg_sreg = $00400000;
otf_reg_k = $00800000;
otf_reg_fpu = $01000000;
otf_reg_mmx = $02000000;
otf_reg_xmm = $04000000;
otf_reg_ymm = $08000000;
otf_reg_zmm = $10000000;
otf_reg_extra_mask = $0F000000;
{ Bits 16..19: subclasses, meaning depends on classes field }
otf_sub0 = $00010000;
otf_sub1 = $00020000;
otf_sub2 = $00040000;
otf_sub3 = $00080000;
OT_REG_SMASK = otf_sub0 or otf_sub1 or otf_sub2 or otf_sub3;
//OT_REG_EXTRA_MASK = $0F000000;
OT_REG_EXTRA_MASK = $1F000000;
OT_REG_TYPMASK = otf_reg_cdt or otf_reg_gpr or otf_reg_sreg or otf_reg_k or otf_reg_extra_mask;
{ register class 0: CRx, DRx and TRx }
{$ifdef x86_64}
OT_REG_CDT = OT_REGISTER or otf_reg_cdt or OT_BITS64;
{$else x86_64}
OT_REG_CDT = OT_REGISTER or otf_reg_cdt or OT_BITS32;
{$endif x86_64}
OT_REG_CREG = OT_REG_CDT or otf_sub0; { CRn }
OT_REG_DREG = OT_REG_CDT or otf_sub1; { DRn }
OT_REG_TREG = OT_REG_CDT or otf_sub2; { TRn }
OT_REG_CR4 = OT_REG_CDT or otf_sub3; { CR4 (Pentium only) }
{ register class 1: general-purpose registers }
OT_REG_GPR = OT_REGNORM or otf_reg_gpr;
OT_RM_GPR = OT_REGMEM or otf_reg_gpr;
OT_REG8 = OT_REG_GPR or OT_BITS8; { 8-bit GPR }
OT_REG16 = OT_REG_GPR or OT_BITS16;
OT_REG32 = OT_REG_GPR or OT_BITS32;
OT_REG64 = OT_REG_GPR or OT_BITS64;
{ GPR subclass 0: accumulator: AL, AX, EAX or RAX }
OT_REG_ACCUM = OT_REG_GPR or otf_sub0;
OT_REG_AL = OT_REG_ACCUM or OT_BITS8;
OT_REG_AX = OT_REG_ACCUM or OT_BITS16;
OT_REG_EAX = OT_REG_ACCUM or OT_BITS32;
{$ifdef x86_64}
OT_REG_RAX = OT_REG_ACCUM or OT_BITS64;
{$endif x86_64}
{ GPR subclass 1: counter: CL, CX, ECX or RCX }
OT_REG_COUNT = OT_REG_GPR or otf_sub1;
OT_REG_CL = OT_REG_COUNT or OT_BITS8;
OT_REG_CX = OT_REG_COUNT or OT_BITS16;
OT_REG_ECX = OT_REG_COUNT or OT_BITS32;
{$ifdef x86_64}
OT_REG_RCX = OT_REG_COUNT or OT_BITS64;
{$endif x86_64}
{ GPR subclass 2: data register: DL, DX, EDX or RDX }
OT_REG_DX = OT_REG_GPR or otf_sub2 or OT_BITS16;
OT_REG_EDX = OT_REG_GPR or otf_sub2 or OT_BITS32;
{ register class 2: Segment registers }
OT_REG_SREG = OT_REGISTER or otf_reg_sreg or OT_BITS16;
OT_REG_CS = OT_REG_SREG or otf_sub0; { CS }
OT_REG_DESS = OT_REG_SREG or otf_sub1; { DS, ES, SS (non-CS 86 registers) }
OT_REG_FSGS = OT_REG_SREG or otf_sub2; { FS, GS (386 extended registers) }
{ register class 3: FPU registers }
OT_FPUREG = OT_REGISTER or otf_reg_fpu;
OT_FPU0 = OT_FPUREG or otf_sub0; { FPU stack register zero }
{ register class 4: MMX (both reg and r/m) }
OT_MMXREG = OT_REGNORM or otf_reg_mmx;
OT_MMXRM = OT_REGMEM or otf_reg_mmx;
{ register class 5: XMM (both reg and r/m) }
OT_XMMREG = OT_REGNORM or otf_reg_xmm;
OT_XMMRM = OT_REGMEM or otf_reg_xmm;
OT_XMEM32 = OT_REGNORM or otf_reg_xmm or otf_reg_gpr or OT_BITS32;
OT_XMEM32_M = OT_XMEM32 or OT_VECTORMASK;
OT_XMEM64 = OT_REGNORM or otf_reg_xmm or otf_reg_gpr or OT_BITS64;
OT_XMEM64_M = OT_XMEM64 or OT_VECTORMASK;
OT_XMMREG_M = OT_XMMREG or OT_VECTORMASK;
OT_XMMREG_MZ = OT_XMMREG or OT_VECTORMASK or OT_VECTORZERO;
OT_XMMRM_MZ = OT_XMMRM or OT_VECTORMASK or OT_VECTORZERO;
OT_XMMREG_SAE = OT_XMMREG or OT_VECTORSAE;
OT_XMMRM_SAE = OT_XMMRM or OT_VECTORSAE;
OT_XMMREG_ER = OT_XMMREG or OT_VECTORER;
OT_XMMRM_ER = OT_XMMRM or OT_VECTORER;
{ register class 5: YMM (both reg and r/m) }
OT_YMMREG = OT_REGNORM or otf_reg_ymm;
OT_YMMRM = OT_REGMEM or otf_reg_ymm;
OT_YMEM32 = OT_REGNORM or otf_reg_ymm or otf_reg_gpr or OT_BITS32;
OT_YMEM32_M = OT_YMEM32 or OT_VECTORMASK;
OT_YMEM64 = OT_REGNORM or otf_reg_ymm or otf_reg_gpr or OT_BITS64;
OT_YMEM64_M = OT_YMEM64 or OT_VECTORMASK;
OT_YMMREG_M = OT_YMMREG or OT_VECTORMASK;
OT_YMMREG_MZ = OT_YMMREG or OT_VECTORMASK or OT_VECTORZERO;
OT_YMMRM_MZ = OT_YMMRM or OT_VECTORMASK or OT_VECTORZERO;
OT_YMMREG_SAE = OT_YMMREG or OT_VECTORSAE;
OT_YMMRM_SAE = OT_YMMRM or OT_VECTORSAE;
OT_YMMREG_ER = OT_YMMREG or OT_VECTORER;
OT_YMMRM_ER = OT_YMMRM or OT_VECTORER;
{ register class 5: ZMM (both reg and r/m) }
OT_ZMMREG = OT_REGNORM or otf_reg_zmm;
OT_ZMMRM = OT_REGMEM or otf_reg_zmm;
OT_ZMEM32 = OT_REGNORM or otf_reg_zmm or otf_reg_gpr or OT_BITS32;
OT_ZMEM32_M = OT_ZMEM32 or OT_VECTORMASK;
OT_ZMEM64 = OT_REGNORM or otf_reg_zmm or otf_reg_gpr or OT_BITS64;
OT_ZMEM64_M = OT_ZMEM64 or OT_VECTORMASK;
OT_ZMMREG_M = OT_ZMMREG or OT_VECTORMASK;
OT_ZMMREG_MZ = OT_ZMMREG or OT_VECTORMASK or OT_VECTORZERO;
OT_ZMMRM_MZ = OT_ZMMRM or OT_VECTORMASK or OT_VECTORZERO;
OT_ZMMREG_SAE = OT_ZMMREG or OT_VECTORSAE;
OT_ZMMRM_SAE = OT_ZMMRM or OT_VECTORSAE;
OT_ZMMREG_ER = OT_ZMMREG or OT_VECTORER;
OT_ZMMRM_ER = OT_ZMMRM or OT_VECTORER;
OT_KREG = OT_REGNORM or otf_reg_k;
OT_KREG_M = OT_KREG or OT_VECTORMASK;
{ Vector-Memory operands }
OT_VMEM_ANY = OT_XMEM32 or OT_XMEM64 or OT_YMEM32 or OT_YMEM64 or OT_ZMEM32 or OT_ZMEM64;
{ Memory operands }
OT_MEM8 = OT_MEMORY or OT_BITS8;
OT_MEM16 = OT_MEMORY or OT_BITS16;
OT_MEM16_M = OT_MEM16 or OT_VECTORMASK;
OT_MEM32 = OT_MEMORY or OT_BITS32;
OT_MEM32_M = OT_MEMORY or OT_BITS32 or OT_VECTORMASK;
OT_BMEM32 = OT_MEMORY or OT_BITS32 or OT_VECTORBCST;
OT_BMEM32_SAE= OT_MEMORY or OT_BITS32 or OT_VECTORBCST or OT_VECTORSAE;
OT_MEM64 = OT_MEMORY or OT_BITS64;
OT_MEM64_M = OT_MEMORY or OT_BITS64 or OT_VECTORMASK;
OT_BMEM64 = OT_MEMORY or OT_BITS64 or OT_VECTORBCST;
OT_BMEM64_SAE= OT_MEMORY or OT_BITS64 or OT_VECTORBCST or OT_VECTORSAE;
OT_MEM128 = OT_MEMORY or OT_BITS128;
OT_MEM128_M = OT_MEMORY or OT_BITS128 or OT_VECTORMASK;
OT_MEM256 = OT_MEMORY or OT_BITS256;
OT_MEM256_M = OT_MEMORY or OT_BITS256 or OT_VECTORMASK;
OT_MEM512 = OT_MEMORY or OT_BITS512;
OT_MEM512_M = OT_MEMORY or OT_BITS512 or OT_VECTORMASK;
OT_MEM80 = OT_MEMORY or OT_BITS80;
OT_MEM_OFFS = OT_MEMORY or otf_sub0; { special type of EA }
{ simple [address] offset }
{ Matches any type of r/m operand }
OT_MEMORY_ANY = OT_MEMORY or OT_RM_GPR or OT_XMMRM or OT_MMXRM or OT_YMMRM or OT_ZMMRM or OT_REG_EXTRA_MASK;
{ Immediate operands }
OT_IMM8 = OT_IMMEDIATE or OT_BITS8;
OT_IMM16 = OT_IMMEDIATE or OT_BITS16;
OT_IMM32 = OT_IMMEDIATE or OT_BITS32;
OT_IMM64 = OT_IMMEDIATE or OT_BITS64;
OT_ONENESS = otf_sub0; { special type of immediate operand }
OT_UNITY = OT_IMMEDIATE or OT_ONENESS; { for shift/rotate instructions }
OTVE_VECTOR_SAE = 1 shl 8;
OTVE_VECTOR_ER = 1 shl 9;
OTVE_VECTOR_ZERO = 1 shl 10;
OTVE_VECTOR_WRITEMASK = 1 shl 11;
OTVE_VECTOR_BCST = 1 shl 12;
OTVE_VECTOR_BCST2 = 0;
OTVE_VECTOR_BCST4 = 1 shl 4;
OTVE_VECTOR_BCST8 = 1 shl 5;
OTVE_VECTOR_BCST16 = 3 shl 4;
OTVE_VECTOR_RNSAE = OTVE_VECTOR_ER or 0;
OTVE_VECTOR_RDSAE = OTVE_VECTOR_ER or 1 shl 6;
OTVE_VECTOR_RUSAE = OTVE_VECTOR_ER or 1 shl 7;
OTVE_VECTOR_RZSAE = OTVE_VECTOR_ER or 3 shl 6;
OTVE_VECTOR_BCST_MASK = OTVE_VECTOR_BCST2 or OTVE_VECTOR_BCST4 or OTVE_VECTOR_BCST8 or OTVE_VECTOR_BCST16;
OTVE_VECTOR_ER_MASK = OTVE_VECTOR_RNSAE or OTVE_VECTOR_RDSAE or OTVE_VECTOR_RUSAE or OTVE_VECTOR_RZSAE;
OTVE_VECTOR_MASK = OTVE_VECTOR_SAE or OTVE_VECTOR_ER or OTVE_VECTOR_ZERO or OTVE_VECTOR_WRITEMASK or OTVE_VECTOR_BCST;
{ Size of the instruction table converted by nasmconv.pas }
{$if defined(x86_64)}
instabentries = {$i x8664nop.inc}
{$elseif defined(i386)}
instabentries = {$i i386nop.inc}
{$elseif defined(i8086)}
instabentries = {$i i8086nop.inc}
{$endif}
maxinfolen = 10;
type
{ What an instruction can change. Needed for optimizer and spilling code.
Note: The order of this enumeration is should not be changed! }
TInsChange = (Ch_None,
{Read from a register}
Ch_REAX, Ch_RECX, Ch_REDX, Ch_REBX, Ch_RESP, Ch_REBP, Ch_RESI, Ch_REDI,
{write from a register}
Ch_WEAX, Ch_WECX, Ch_WEDX, Ch_WEBX, Ch_WESP, Ch_WEBP, Ch_WESI, Ch_WEDI,
{read and write from/to a register}
Ch_RWEAX, Ch_RWECX, Ch_RWEDX, Ch_RWEBX, Ch_RWESP, Ch_RWEBP, Ch_RWESI, Ch_RWEDI,
{modify the contents of a register with the purpose of using
this changed content afterwards (add/sub/..., but e.g. not rep
or movsd)}
Ch_MEAX, Ch_MECX, Ch_MEDX, Ch_MEBX, Ch_MESP, Ch_MEBP, Ch_MESI, Ch_MEDI,
{read individual flag bits from the flags register}
Ch_RCarryFlag,Ch_RParityFlag,Ch_RAuxiliaryFlag,Ch_RZeroFlag,Ch_RSignFlag,Ch_ROverflowFlag,
{write individual flag bits to the flags register}
Ch_WCarryFlag,Ch_WParityFlag,Ch_WAuxiliaryFlag,Ch_WZeroFlag,Ch_WSignFlag,Ch_WOverflowFlag,
{set individual flag bits to 0 in the flags register}
Ch_W0CarryFlag,Ch_W0ParityFlag,Ch_W0AuxiliaryFlag,Ch_W0ZeroFlag,Ch_W0SignFlag,Ch_W0OverflowFlag,
{set individual flag bits to 1 in the flags register}
Ch_W1CarryFlag,Ch_W1ParityFlag,Ch_W1AuxiliaryFlag,Ch_W1ZeroFlag,Ch_W1SignFlag,Ch_W1OverflowFlag,
{write an undefined value to individual flag bits in the flags register}
Ch_WUCarryFlag,Ch_WUParityFlag,Ch_WUAuxiliaryFlag,Ch_WUZeroFlag,Ch_WUSignFlag,Ch_WUOverflowFlag,
{read and write flag bits}
Ch_RWCarryFlag,Ch_RWParityFlag,Ch_RWAuxiliaryFlag,Ch_RWZeroFlag,Ch_RWSignFlag,Ch_RWOverflowFlag,
{more specialized flag bits (not considered part of NR_DEFAULTFLAGS by the compiler)}
Ch_RDirFlag,Ch_W0DirFlag,Ch_W1DirFlag,Ch_W0IntFlag,Ch_W1IntFlag,
{instruction reads flag bits, according to its condition (used by Jcc/SETcc/CMOVcc)}
Ch_RFLAGScc,
{read/write/read+write the entire flags/eflags/rflags register}
Ch_RFlags, Ch_WFlags, Ch_RWFlags,
Ch_FPU,
Ch_Rop1, Ch_Wop1, Ch_RWop1, Ch_Mop1,
Ch_Rop2, Ch_Wop2, Ch_RWop2, Ch_Mop2,
Ch_Rop3, Ch_WOp3, Ch_RWOp3, Ch_Mop3,
Ch_Rop4, Ch_WOp4, Ch_RWOp4, Ch_Mop4,
{ instruction doesn't read it's input register, in case both parameters
are the same register (e.g. xor eax,eax; sub eax,eax; sbb eax,eax (reads flags only), etc.) }
Ch_NoReadIfEqualRegs,
Ch_RMemEDI,Ch_WMemEDI,
Ch_All,
{ x86_64 registers }
Ch_RRAX, Ch_RRCX, Ch_RRDX, Ch_RRBX, Ch_RRSP, Ch_RRBP, Ch_RRSI, Ch_RRDI,
Ch_WRAX, Ch_WRCX, Ch_WRDX, Ch_WRBX, Ch_WRSP, Ch_WRBP, Ch_WRSI, Ch_WRDI,
Ch_RWRAX, Ch_RWRCX, Ch_RWRDX, Ch_RWRBX, Ch_RWRSP, Ch_RWRBP, Ch_RWRSI, Ch_RWRDI,
Ch_MRAX, Ch_MRCX, Ch_MRDX, Ch_MRBX, Ch_MRSP, Ch_MRBP, Ch_MRSI, Ch_MRDI
);
TInsProp = packed record
Ch : set of TInsChange;
end;
TMemRefSizeInfo = (msiUnknown, msiUnsupported, msiNoSize, msiNoMemRef,
msiMultiple, msiMultipleMinSize8, msiMultipleMinSize16, msiMultipleMinSize32,
msiMultipleMinSize64, msiMultipleMinSize128, msiMultipleminSize256, msiMultipleMinSize512,
msiMemRegSize, msiMemRegx16y32, msiMemRegx16y32z64, msiMemRegx32y64, msiMemRegx32y64z128, msiMemRegx64y128, msiMemRegx64y128z256,
msiMemRegx64y256, msiMemRegx64y256z512,
msiMem8, msiMem16, msiMem32, msiBMem32, msiMem64, msiBMem64, msiMem128, msiMem256, msiMem512,
msiXMem32, msiXMem64, msiYMem32, msiYMem64, msiZMem32, msiZMem64,
msiVMemMultiple, msiVMemRegSize,
msiMemRegConst128,msiMemRegConst256,msiMemRegConst512);
TMemRefSizeInfoBCST = (msbUnknown, msbBCST32, msbBCST64, msbMultiple);
TMemRefSizeInfoBCSTType = (btUnknown, bt1to2, bt1to4, bt1to8, bt1to16);
TEVEXTupleState = (etsUnknown, etsIsTuple, etsNotTuple);
TConstSizeInfo = (csiUnknown, csiMultiple, csiNoSize, csiMem8, csiMem16, csiMem32, csiMem64);
TInsTabMemRefSizeInfoRec = record
MemRefSize : TMemRefSizeInfo;
MemRefSizeBCST : TMemRefSizeInfoBCST;
BCSTXMMMultiplicator : byte;
ExistsSSEAVX : boolean;
ConstSize : TConstSizeInfo;
BCSTTypes : Set of TMemRefSizeInfoBCSTType;
end;
const
MemRefMultiples: set of TMemRefSizeInfo = [msiMultiple, msiMultipleMinSize8,
msiMultipleMinSize16, msiMultipleMinSize32,
msiMultipleMinSize64, msiMultipleMinSize128,
msiMultipleMinSize256, msiMultipleMinSize512,
msiVMemMultiple];
MemRefSizeInfoVMems: Set of TMemRefSizeInfo = [msiXMem32, msiXMem64, msiYMem32, msiYMem64,
msiZMem32, msiZMem64,
msiVMemMultiple, msiVMemRegSize];
InsProp : array[tasmop] of TInsProp =
{$if defined(x86_64)}
{$i x8664pro.inc}
{$elseif defined(i386)}
{$i i386prop.inc}
{$elseif defined(i8086)}
{$i i8086prop.inc}
{$endif}
type
TOperandOrder = (op_intel,op_att);
{Instruction flags }
tinsflag = (
{ please keep these in order and in sync with IF_SMASK }
IF_SM, { size match first two operands }
IF_SM2,
IF_SB, { unsized operands can't be non-byte }
IF_SW, { unsized operands can't be non-word }
IF_SD, { unsized operands can't be nondword }
{ unsized argument spec }
{ please keep these in order and in sync with IF_ARMASK }
IF_AR0, { SB, SW, SD applies to argument 0 }
IF_AR1, { SB, SW, SD applies to argument 1 }
IF_AR2, { SB, SW, SD applies to argument 2 }
IF_PRIV, { it's a privileged instruction }
IF_SMM, { it's only valid in SMM }
IF_PROT, { it's protected mode only }
IF_NOX86_64, { removed instruction in x86_64 }
IF_UNDOC, { it's an undocumented instruction }
IF_FPU, { it's an FPU instruction }
IF_MMX, { it's an MMX instruction }
{ it's a 3DNow! instruction }
IF_3DNOW,
{ it's a SSE (KNI, MMX2) instruction }
IF_SSE,
{ SSE2 instructions }
IF_SSE2,
{ SSE3 instructions }
IF_SSE3,
{ SSE64 instructions }
IF_SSE64,
{ SVM instructions }
IF_SVM,
{ SSE4 instructions }
IF_SSE4,
IF_SSSE3,
IF_SSE41,
IF_SSE42,
IF_MOVBE,
IF_CLMUL,
IF_AVX,
IF_AVX2,
IF_AVX512,
IF_BMI1,
IF_BMI2,
{ Intel ADX (Multi-Precision Add-Carry Instruction Extensions) }
IF_ADX,
IF_16BITONLY,
IF_FMA,
IF_FMA4,
IF_TSX,
IF_RAND,
IF_XSAVE,
IF_PREFETCHWT1,
{ mask for processor level }
{ please keep these in order and in sync with IF_PLEVEL }
IF_8086, { 8086 instruction }
IF_186, { 186+ instruction }
IF_286, { 286+ instruction }
IF_386, { 386+ instruction }
IF_486, { 486+ instruction }
IF_PENT, { Pentium instruction }
IF_P6, { P6 instruction }
IF_KATMAI, { Katmai instructions }
IF_WILLAMETTE, { Willamette instructions }
IF_PRESCOTT, { Prescott instructions }
IF_X86_64,
IF_SANDYBRIDGE, { Sandybridge-specific instruction }
IF_NEC, { NEC V20/V30 instruction }
{ the following are not strictly part of the processor level, because
they are never used standalone, but always in combination with a
separate processor level flag. Therefore, they use bits outside of
IF_PLEVEL, otherwise they would mess up the processor level they're
used in combination with.
The following combinations are currently used:
[IF_AMD, IF_P6],
[IF_CYRIX, IF_486],
[IF_CYRIX, IF_PENT],
[IF_CYRIX, IF_P6] }
IF_CYRIX, { Cyrix, Centaur or VIA-specific instruction }
IF_AMD, { AMD-specific instruction }
{ added flags }
IF_PRE, { it's a prefix instruction }
IF_PASS2, { if the instruction can change in a second pass }
IF_IMM4, { immediate operand is a nibble (must be in range [0..15]) }
IF_IMM3, { immediate operand is a triad (must be in range [0..7]) }
{ avx512 flags }
IF_BCST2,
IF_BCST4,
IF_BCST8,
IF_BCST16,
IF_T2, { disp8 - tuple - 2 }
IF_T4, { disp8 - tuple - 4 }
IF_T8, { disp8 - tuple - 8 }
IF_T1S, { disp8 - tuple - 1 scalar }
IF_T1F32,
IF_T1F64,
IF_TMDDUP,
IF_TFV, { disp8 - tuple - full vector }
IF_TFVM, { disp8 - tuple - full vector memory }
IF_TQVM,
IF_TMEM128,
IF_THV,
IF_THVM,
IF_TOVM
);
tinsflags=set of tinsflag;
const
IF_SMASK=[IF_SM,IF_SM2,IF_SB,IF_SW,IF_SD];
IF_ARMASK=[IF_AR0,IF_AR1,IF_AR2]; { mask for unsized argument spec }
IF_PLEVEL=[IF_8086..IF_NEC]; { mask for processor level }
IF_TUPLEMASK=[IF_T2..IF_TOVM]; { mask for AVX512 disp8-tuples }
type
tinsentry=packed record
opcode : tasmop;
ops : byte;
optypes : array[0..max_operands-1] of int64;
code : array[0..maxinfolen] of char;
flags : tinsflags;
end;
pinsentry=^tinsentry;
{ alignment for operator }
tai_align = class(tai_align_abstract)
function calculatefillbuf(var buf : tfillbuffer;executable : boolean):pchar;override;
end;
{ taicpu }
taicpu = class(tai_cpu_abstract_sym)
opsize : topsize;
constructor op_none(op : tasmop);
constructor op_none(op : tasmop;_size : topsize);
constructor op_reg(op : tasmop;_size : topsize;_op1 : tregister);
constructor op_const(op : tasmop;_size : topsize;_op1 : aint);
constructor op_ref(op : tasmop;_size : topsize;const _op1 : treference);
constructor op_reg_reg(op : tasmop;_size : topsize;_op1,_op2 : tregister);
constructor op_reg_ref(op : tasmop;_size : topsize;_op1 : tregister;const _op2 : treference);
constructor op_reg_const(op:tasmop; _size: topsize; _op1: tregister; _op2: aint);
constructor op_const_reg(op : tasmop;_size : topsize;_op1 : aint;_op2 : tregister);
constructor op_const_const(op : tasmop;_size : topsize;_op1,_op2 : aint);
constructor op_const_ref(op : tasmop;_size : topsize;_op1 : aint;const _op2 : treference);
constructor op_ref_reg(op : tasmop;_size : topsize;const _op1 : treference;_op2 : tregister);
constructor op_reg_reg_reg(op : tasmop;_size : topsize;_op1,_op2,_op3 : tregister);
constructor op_const_reg_reg(op : tasmop;_size : topsize;_op1 : aint;_op2 : tregister;_op3 : tregister);
constructor op_const_ref_reg(op : tasmop;_size : topsize;_op1 : aint;const _op2 : treference;_op3 : tregister);
constructor op_ref_reg_reg(op : tasmop;_size : topsize;const _op1 : treference;_op2,_op3 : tregister);
constructor op_const_reg_ref(op : tasmop;_size : topsize;_op1 : aint;_op2 : tregister;const _op3 : treference);
constructor op_reg_reg_ref(op : tasmop;_size : topsize;_op1,_op2 : tregister;const _op3 : treference);
constructor op_const_reg_reg_reg(op : tasmop;_size : topsize;_op1 : aint;_op2, _op3, _op4 : tregister);
{ this is for Jmp instructions }
constructor op_cond_sym(op : tasmop;cond:TAsmCond;_size : topsize;_op1 : tasmsymbol);
constructor op_sym(op : tasmop;_size : topsize;_op1 : tasmsymbol);
constructor op_sym_ofs(op : tasmop;_size : topsize;_op1 : tasmsymbol;_op1ofs:longint);
constructor op_sym_ofs_reg(op : tasmop;_size : topsize;_op1 : tasmsymbol;_op1ofs:longint;_op2 : tregister);
constructor op_sym_ofs_ref(op : tasmop;_size : topsize;_op1 : tasmsymbol;_op1ofs:longint;const _op2 : treference);
procedure changeopsize(siz:topsize);
function GetString:string;
{ This is a workaround for the GAS non commutative fpu instruction braindamage.
Early versions of the UnixWare assembler had a bug where some fpu instructions
were reversed and GAS still keeps this "feature" for compatibility.
for details: http://sourceware.org/binutils/docs/as/i386_002dBugs.html#i386_002dBugs
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=372528
http://en.wikibooks.org/wiki/X86_Assembly/GAS_Syntax#Caveats
Since FPC is "GAS centric" due to its history it generates instructions with the same operand order so
when generating output for other assemblers, the opcodes must be fixed before writing them.
This function returns the fixed opcodes. Changing the opcodes permanently is no good idea
because in case of smartlinking assembler is generated twice so at the second run wrong
assembler is generated.
}
function FixNonCommutativeOpcodes: tasmop;
private
FOperandOrder : TOperandOrder;
procedure init(_size : topsize); { this need to be called by all constructor }
public
{ the next will reset all instructions that can change in pass 2 }
procedure ResetPass1;override;
procedure ResetPass2;override;
function CheckIfValid:boolean;
function Pass1(objdata:TObjData):longint;override;
procedure Pass2(objdata:TObjData);override;
procedure SetOperandOrder(order:TOperandOrder);
function is_same_reg_move(regtype: Tregistertype):boolean;override;
{ register spilling code }
function spilling_get_operation_type(opnr: longint): topertype;override;
{$ifdef i8086}
procedure loadsegsymbol(opidx:longint;s:tasmsymbol);
{$endif i8086}
property OperandOrder : TOperandOrder read FOperandOrder;
private
{ next fields are filled in pass1, so pass2 is faster }
insentry : PInsEntry;
insoffset : longint;
LastInsOffset : longint; { need to be public to be reset }
inssize : shortint;
EVEXTupleState: TEVEXTupleState; { AVX512 disp8*N }
{$ifdef x86_64}
rex : byte;
{$endif x86_64}
function InsEnd:longint;
procedure create_ot(objdata:TObjData);
function Matches(p:PInsEntry):boolean;
function calcsize(p:PInsEntry):shortint;
procedure gencode(objdata:TObjData);
function NeedAddrPrefix(opidx:byte):boolean;
function NeedAddrPrefix:boolean;
procedure write0x66prefix(objdata:TObjData);
procedure write0x67prefix(objdata:TObjData);
procedure Swapoperands;
function FindInsentry(objdata:TObjData):boolean;
function CheckUseEVEX: boolean;
procedure CheckEVEXTuple(const aInput:toper; aInsEntry: pInsentry; aIsVector128, aIsVector256, aIsVector512, aIsEVEXW1: boolean);
end;
function is_64_bit_ref(const ref:treference):boolean;
function is_32_bit_ref(const ref:treference):boolean;
function is_16_bit_ref(const ref:treference):boolean;
function get_ref_address_size(const ref:treference):byte;
function get_default_segment_of_ref(const ref:treference):tregister;
procedure optimize_ref(var ref:treference; inlineasm: boolean);
function spilling_create_load(const ref:treference;r:tregister):Taicpu;
function spilling_create_store(r:tregister; const ref:treference):Taicpu;
function MemRefInfo(aAsmop: TAsmOp): TInsTabMemRefSizeInfoRec;
function MightHaveExtension(AsmOp : TAsmOp) : Boolean;
procedure InitAsm;
procedure DoneAsm;
{*****************************************************************************
External Symbol Chain
used for agx86nsm and agx86int
*****************************************************************************}
type
PExternChain = ^TExternChain;
TExternChain = Record
psym : pshortstring;
is_defined : boolean;
next : PExternChain;
end;
const
FEC : PExternChain = nil;
procedure AddSymbol(symname : string; defined : boolean);
procedure FreeExternChainList;
implementation
uses
cutils,
globals,
systems,
itcpugas,
cpuinfo;
procedure AddSymbol(symname : string; defined : boolean);
var
EC : PExternChain;
begin
EC:=FEC;
while assigned(EC) do
begin
if EC^.psym^=symname then
begin
if defined then
EC^.is_defined:=true;
exit;
end;
EC:=EC^.next;
end;
New(EC);
EC^.next:=FEC;
FEC:=EC;
FEC^.psym:=stringdup(symname);
FEC^.is_defined := defined;
end;
procedure FreeExternChainList;
var
EC : PExternChain;
begin
EC:=FEC;
while assigned(EC) do
begin
FEC:=EC^.next;
stringdispose(EC^.psym);
Dispose(EC);
EC:=FEC;
end;
end;
{*****************************************************************************
Instruction table
*****************************************************************************}
type
TInsTabCache=array[TasmOp] of longint;
PInsTabCache=^TInsTabCache;
TInsTabMemRefSizeInfoCache=array[TasmOp] of TInsTabMemRefSizeInfoRec;
PInsTabMemRefSizeInfoCache=^TInsTabMemRefSizeInfoCache;
const
{$if defined(x86_64)}
InsTab:array[0..instabentries-1] of TInsEntry={$i x8664tab.inc}
{$elseif defined(i386)}
InsTab:array[0..instabentries-1] of TInsEntry={$i i386tab.inc}
{$elseif defined(i8086)}
InsTab:array[0..instabentries-1] of TInsEntry={$i i8086tab.inc}
{$endif}
var
InsTabCache : PInsTabCache;
InsTabMemRefSizeInfoCache: PInsTabMemRefSizeInfoCache;
const
{$if defined(x86_64)}
{ Intel style operands ! }
opsize_2_type:array[0..2,topsize] of int64=(
(OT_NONE,
OT_BITS8,OT_BITS16,OT_BITS32,OT_BITS64,OT_BITS16,OT_BITS32,OT_BITS32,OT_BITS64,OT_BITS64,OT_BITS64,
OT_BITS16,OT_BITS32,OT_BITS64,
OT_BITS32,OT_BITS64,OT_BITS80,OT_BITS64,OT_NONE,
OT_BITS64,
OT_NEAR,OT_FAR,OT_SHORT,
OT_NONE,
OT_BITS128,
OT_BITS256,
OT_BITS512
),
(OT_NONE,
OT_BITS8,OT_BITS16,OT_BITS32,OT_BITS64,OT_BITS8,OT_BITS8,OT_BITS16,OT_BITS8,OT_BITS16,OT_BITS32,
OT_BITS16,OT_BITS32,OT_BITS64,
OT_BITS32,OT_BITS64,OT_BITS80,OT_BITS64,OT_NONE,
OT_BITS64,
OT_NEAR,OT_FAR,OT_SHORT,
OT_NONE,
OT_BITS128,
OT_BITS256,
OT_BITS512
),
(OT_NONE,
OT_BITS8,OT_BITS16,OT_BITS32,OT_BITS64,OT_NONE,OT_NONE,OT_NONE,OT_NONE,OT_NONE,OT_NONE,
OT_BITS16,OT_BITS32,OT_BITS64,
OT_BITS32,OT_BITS64,OT_BITS80,OT_BITS64,OT_NONE,
OT_BITS64,
OT_NEAR,OT_FAR,OT_SHORT,
OT_NONE,
OT_BITS128,
OT_BITS256,
OT_BITS512
)
);
reg_ot_table : array[tregisterindex] of longint = (
{$i r8664ot.inc}
);
{$elseif defined(i386)}
{ Intel style operands ! }
opsize_2_type:array[0..2,topsize] of int64=(
(OT_NONE,
OT_BITS8,OT_BITS16,OT_BITS32,OT_BITS64,OT_BITS16,OT_BITS32,OT_BITS32,
OT_BITS16,OT_BITS32,OT_BITS64,
OT_BITS32,OT_BITS64,OT_BITS80,OT_BITS64,OT_NONE,
OT_BITS64,
OT_NEAR,OT_FAR,OT_SHORT,
OT_NONE,
OT_BITS128,
OT_BITS256,
OT_BITS512
),
(OT_NONE,
OT_BITS8,OT_BITS16,OT_BITS32,OT_BITS64,OT_BITS8,OT_BITS8,OT_BITS16,
OT_BITS16,OT_BITS32,OT_BITS64,
OT_BITS32,OT_BITS64,OT_BITS80,OT_BITS64,OT_NONE,
OT_BITS64,
OT_NEAR,OT_FAR,OT_SHORT,
OT_NONE,
OT_BITS128,
OT_BITS256,
OT_BITS512
),
(OT_NONE,
OT_BITS8,OT_BITS16,OT_BITS32,OT_BITS64,OT_NONE,OT_NONE,OT_NONE,
OT_BITS16,OT_BITS32,OT_BITS64,
OT_BITS32,OT_BITS64,OT_BITS80,OT_BITS64,OT_NONE,
OT_BITS64,
OT_NEAR,OT_FAR,OT_SHORT,
OT_NONE,
OT_BITS128,
OT_BITS256,
OT_BITS512
)
);
reg_ot_table : array[tregisterindex] of longint = (
{$i r386ot.inc}
);
{$elseif defined(i8086)}
{ Intel style operands ! }
opsize_2_type:array[0..2,topsize] of int64=(
(OT_NONE,
OT_BITS8,OT_BITS16,OT_BITS32,OT_BITS64,OT_BITS16,OT_BITS32,OT_BITS32,
OT_BITS16,OT_BITS32,OT_BITS64,
OT_BITS32,OT_BITS64,OT_BITS80,OT_BITS64,OT_NONE,
OT_BITS64,
OT_NEAR,OT_FAR,OT_SHORT,
OT_NONE,
OT_BITS128,
OT_BITS256,
OT_BITS512
),
(OT_NONE,
OT_BITS8,OT_BITS16,OT_BITS32,OT_BITS64,OT_BITS8,OT_BITS8,OT_BITS16,
OT_BITS16,OT_BITS32,OT_BITS64,
OT_BITS32,OT_BITS64,OT_BITS80,OT_BITS64,OT_NONE,
OT_BITS64,
OT_NEAR,OT_FAR,OT_SHORT,
OT_NONE,
OT_BITS128,
OT_BITS256,
OT_BITS512
),
(OT_NONE,
OT_BITS8,OT_BITS16,OT_BITS32,OT_BITS64,OT_NONE,OT_NONE,OT_NONE,
OT_BITS16,OT_BITS32,OT_BITS64,
OT_BITS32,OT_BITS64,OT_BITS80,OT_BITS64,OT_NONE,
OT_BITS64,
OT_NEAR,OT_FAR,OT_SHORT,
OT_NONE,
OT_BITS128,
OT_BITS256,
OT_BITS512
)
);
reg_ot_table : array[tregisterindex] of longint = (
{$i r8086ot.inc}
);
{$endif}
function MemRefInfo(aAsmop: TAsmOp): TInsTabMemRefSizeInfoRec;
begin
result := InsTabMemRefSizeInfoCache^[aAsmop];
end;
function MightHaveExtension(AsmOp : TAsmOp): Boolean;
var
i,j: LongInt;
insentry: pinsentry;
begin
Result:=true;
i:=InsTabCache^[AsmOp];
if i>=0 then
begin
insentry:=@instab[i];
while insentry^.opcode=AsmOp do
begin
for j:=0 to insentry^.ops-1 do
begin
if (insentry^.optypes[j] and OT_VECTOR_EXT)<>0 then
exit;
end;
inc(i);
insentry:=@instab[i];
end;
end;
Result:=false;
end;
{ Operation type for spilling code }
type
toperation_type_table=array[tasmop,0..Max_Operands] of topertype;
var
operation_type_table : ^toperation_type_table;
{****************************************************************************
TAI_ALIGN
****************************************************************************}
function tai_align.calculatefillbuf(var buf : tfillbuffer;executable : boolean):pchar;
const
{ Updated according to
Software Optimization Guide for AMD Family 15h Processors, Verison 3.08, January 2014
and
Intel 64 and IA-32 Architectures Software Developer’s Manual
Volume 2B: Instruction Set Reference, N-Z, January 2015
}
alignarray_cmovcpus:array[0..10] of string[11]=(
#$66#$66#$66#$0F#$1F#$84#$00#$00#$00#$00#$00,
#$66#$66#$0F#$1F#$84#$00#$00#$00#$00#$00,
#$66#$0F#$1F#$84#$00#$00#$00#$00#$00,
#$0F#$1F#$84#$00#$00#$00#$00#$00,
#$0F#$1F#$80#$00#$00#$00#$00,
#$66#$0F#$1F#$44#$00#$00,
#$0F#$1F#$44#$00#$00,
#$0F#$1F#$40#$00,
#$0F#$1F#$00,
#$66#$90,
#$90);
{$ifdef i8086}
alignarray:array[0..5] of string[8]=(
#$90#$90#$90#$90#$90#$90#$90,
#$90#$90#$90#$90#$90#$90,
#$90#$90#$90#$90,
#$90#$90#$90,
#$90#$90,
#$90);
{$else i8086}
alignarray:array[0..5] of string[8]=(
#$8D#$B4#$26#$00#$00#$00#$00,
#$8D#$B6#$00#$00#$00#$00,
#$8D#$74#$26#$00,
#$8D#$76#$00,
#$89#$F6,
#$90);
{$endif i8086}
var
bufptr : pchar;
j : longint;
localsize: byte;
begin
inherited calculatefillbuf(buf,executable);
if not(use_op) and executable then
begin
bufptr:=pchar(@buf);
{ fillsize may still be used afterwards, so don't modify }
{ e.g. writebytes(hp.calculatefillbuf(buf)^,hp.fillsize) }
localsize:=fillsize;
while (localsize>0) do
begin
{$ifndef i8086}
if CPUX86_HAS_CMOV in cpu_capabilities[current_settings.cputype] then
begin
for j:=low(alignarray_cmovcpus) to high(alignarray_cmovcpus) do
if (localsize>=length(alignarray_cmovcpus[j])) then
break;
move(alignarray_cmovcpus[j][1],bufptr^,length(alignarray_cmovcpus[j]));
inc(bufptr,length(alignarray_cmovcpus[j]));
dec(localsize,length(alignarray_cmovcpus[j]));
end
else
{$endif not i8086}
begin
for j:=low(alignarray) to high(alignarray) do
if (localsize>=length(alignarray[j])) then
break;
move(alignarray[j][1],bufptr^,length(alignarray[j]));
inc(bufptr,length(alignarray[j]));
dec(localsize,length(alignarray[j]));
end
end;
end;
calculatefillbuf:=pchar(@buf);
end;
{*****************************************************************************
Taicpu Constructors
*****************************************************************************}
procedure taicpu.changeopsize(siz:topsize);
begin
opsize:=siz;
end;
procedure taicpu.init(_size : topsize);
begin
{ default order is att }
FOperandOrder:=op_att;
segprefix:=NR_NO;
opsize:=_size;
insentry:=nil;
LastInsOffset:=-1;
InsOffset:=0;
InsSize:=0;
EVEXTupleState := etsUnknown;
end;
constructor taicpu.op_none(op : tasmop);
begin
inherited create(op);
init(S_NO);
end;
constructor taicpu.op_none(op : tasmop;_size : topsize);
begin
inherited create(op);
init(_size);
end;
constructor taicpu.op_reg(op : tasmop;_size : topsize;_op1 : tregister);
begin
inherited create(op);
init(_size);
ops:=1;
loadreg(0,_op1);
end;
constructor taicpu.op_const(op : tasmop;_size : topsize;_op1 : aint);
begin
inherited create(op);
init(_size);
ops:=1;
loadconst(0,_op1);
end;
constructor taicpu.op_ref(op : tasmop;_size : topsize;const _op1 : treference);
begin
inherited create(op);
init(_size);
ops:=1;
loadref(0,_op1);
end;
constructor taicpu.op_reg_reg(op : tasmop;_size : topsize;_op1,_op2 : tregister);
begin
inherited create(op);
init(_size);
ops:=2;
loadreg(0,_op1);
loadreg(1,_op2);
end;
constructor taicpu.op_reg_const(op:tasmop; _size: topsize; _op1: tregister; _op2: aint);
begin
inherited create(op);
init(_size);
ops:=2;
loadreg(0,_op1);
loadconst(1,_op2);
end;
constructor taicpu.op_reg_ref(op : tasmop;_size : topsize;_op1 : tregister;const _op2 : treference);
begin
inherited create(op);
init(_size);
ops:=2;
loadreg(0,_op1);
loadref(1,_op2);
end;
constructor taicpu.op_const_reg(op : tasmop;_size : topsize;_op1 : aint;_op2 : tregister);
begin
inherited create(op);
init(_size);
ops:=2;
loadconst(0,_op1);
loadreg(1,_op2);
end;
constructor taicpu.op_const_const(op : tasmop;_size : topsize;_op1,_op2 : aint);
begin
inherited create(op);
init(_size);
ops:=2;
loadconst(0,_op1);
loadconst(1,_op2);
end;
constructor taicpu.op_const_ref(op : tasmop;_size : topsize;_op1 : aint;const _op2 : treference);
begin
inherited create(op);
init(_size);
ops:=2;
loadconst(0,_op1);
loadref(1,_op2);
end;
constructor taicpu.op_ref_reg(op : tasmop;_size : topsize;const _op1 : treference;_op2 : tregister);
begin
inherited create(op);
init(_size);
ops:=2;
loadref(0,_op1);
loadreg(1,_op2);
end;
constructor taicpu.op_reg_reg_reg(op : tasmop;_size : topsize;_op1,_op2,_op3 : tregister);
begin
inherited create(op);
init(_size);
ops:=3;
loadreg(0,_op1);
loadreg(1,_op2);
loadreg(2,_op3);
end;
constructor taicpu.op_const_reg_reg(op : tasmop;_size : topsize;_op1 : aint;_op2 : tregister;_op3 : tregister);
begin
inherited create(op);
init(_size);
ops:=3;
loadconst(0,_op1);
loadreg(1,_op2);
loadreg(2,_op3);
end;
constructor taicpu.op_ref_reg_reg(op : tasmop;_size : topsize;const _op1 : treference;_op2,_op3 : tregister);
begin
inherited create(op);
init(_size);
ops:=3;
loadref(0,_op1);
loadreg(1,_op2);
loadreg(2,_op3);
end;
constructor taicpu.op_const_ref_reg(op : tasmop;_size : topsize;_op1 : aint;const _op2 : treference;_op3 : tregister);
begin
inherited create(op);
init(_size);
ops:=3;
loadconst(0,_op1);
loadref(1,_op2);
loadreg(2,_op3);
end;
constructor taicpu.op_const_reg_ref(op : tasmop;_size : topsize;_op1 : aint;_op2 : tregister;const _op3 : treference);
begin
inherited create(op);
init(_size);
ops:=3;
loadconst(0,_op1);
loadreg(1,_op2);
loadref(2,_op3);
end;
constructor taicpu.op_reg_reg_ref(op : tasmop;_size : topsize;_op1,_op2 : tregister;const _op3 : treference);
begin
inherited create(op);
init(_size);
ops:=3;
loadreg(0,_op1);
loadreg(1,_op2);
loadref(2,_op3);
end;
constructor taicpu.op_const_reg_reg_reg(op : tasmop; _size : topsize; _op1 : aint; _op2, _op3, _op4 : tregister);
begin
inherited create(op);
init(_size);
ops:=4;
loadconst(0,_op1);
loadreg(1,_op2);
loadreg(2,_op3);
loadreg(3,_op4);
end;
constructor taicpu.op_cond_sym(op : tasmop;cond:TAsmCond;_size : topsize;_op1 : tasmsymbol);
begin
inherited create(op);
init(_size);
condition:=cond;
ops:=1;
loadsymbol(0,_op1,0);
end;
constructor taicpu.op_sym(op : tasmop;_size : topsize;_op1 : tasmsymbol);
begin
inherited create(op);
init(_size);
ops:=1;
loadsymbol(0,_op1,0);
end;
constructor taicpu.op_sym_ofs(op : tasmop;_size : topsize;_op1 : tasmsymbol;_op1ofs:longint);
begin
inherited create(op);
init(_size);
ops:=1;
loadsymbol(0,_op1,_op1ofs);
end;
constructor taicpu.op_sym_ofs_reg(op : tasmop;_size : topsize;_op1 : tasmsymbol;_op1ofs:longint;_op2 : tregister);
begin
inherited create(op);
init(_size);
ops:=2;
loadsymbol(0,_op1,_op1ofs);
loadreg(1,_op2);
end;
constructor taicpu.op_sym_ofs_ref(op : tasmop;_size : topsize;_op1 : tasmsymbol;_op1ofs:longint;const _op2 : treference);
begin
inherited create(op);
init(_size);
ops:=2;
loadsymbol(0,_op1,_op1ofs);
loadref(1,_op2);
end;
function taicpu.GetString:string;
var
i : longint;
s : string;
regnr: string;
addsize : boolean;
begin
s:='['+std_op2str[opcode];
for i:=0 to ops-1 do
begin
with oper[i]^ do
begin
if i=0 then
s:=s+' '
else
s:=s+',';
{ type }
addsize:=false;
regnr := '';
if getregtype(reg) = R_MMREGISTER then
str(getsupreg(reg),regnr);
if (ot and OT_XMMREG)=OT_XMMREG then
s:=s+'xmmreg' + regnr
else
if (ot and OT_YMMREG)=OT_YMMREG then
s:=s+'ymmreg' + regnr
else
if (ot and OT_ZMMREG)=OT_ZMMREG then
s:=s+'zmmreg' + regnr
else
if (ot and OT_REG_EXTRA_MASK)=OT_MMXREG then
s:=s+'mmxreg'
else
if (ot and OT_REG_EXTRA_MASK)=OT_FPUREG then
s:=s+'fpureg'
else
if (ot and OT_REGISTER)=OT_REGISTER then
begin
s:=s+'reg';
addsize:=true;
end
else
if (ot and OT_IMMEDIATE)=OT_IMMEDIATE then
begin
s:=s+'imm';
addsize:=true;
end
else
if (ot and OT_MEMORY)=OT_MEMORY then
begin
s:=s+'mem';
addsize:=true;
end
else
s:=s+'???';
{ size }
if addsize then
begin
if (ot and OT_BITS8)<>0 then
s:=s+'8'
else
if (ot and OT_BITS16)<>0 then
s:=s+'16'
else
if (ot and OT_BITS32)<>0 then
s:=s+'32'
else
if (ot and OT_BITS64)<>0 then
s:=s+'64'
else
if (ot and OT_BITS128)<>0 then
s:=s+'128'
else
if (ot and OT_BITS256)<>0 then
s:=s+'256'
else
if (ot and OT_BITS512)<>0 then
s:=s+'512'
else
s:=s+'??';
{ signed }
if (ot and OT_SIGNED)<>0 then
s:=s+'s';
end;
if vopext <> 0 then
begin
str(vopext and $07, regnr);
if vopext and OTVE_VECTOR_WRITEMASK = OTVE_VECTOR_WRITEMASK then
s := s + ' {k' + regnr + '}';
if vopext and OTVE_VECTOR_ZERO = OTVE_VECTOR_ZERO then
s := s + ' {z}';
if vopext and OTVE_VECTOR_SAE = OTVE_VECTOR_SAE then
s := s + ' {sae}';
if vopext and OTVE_VECTOR_BCST = OTVE_VECTOR_BCST then
case vopext and OTVE_VECTOR_BCST_MASK of
OTVE_VECTOR_BCST2: s := s + ' {1to2}';
OTVE_VECTOR_BCST4: s := s + ' {1to4}';
OTVE_VECTOR_BCST8: s := s + ' {1to8}';
OTVE_VECTOR_BCST16: s := s + ' {1to16}';
end;
if vopext and OTVE_VECTOR_ER = OTVE_VECTOR_ER then
case vopext and OTVE_VECTOR_ER_MASK of
OTVE_VECTOR_RNSAE: s := s + ' {rn-sae}';
OTVE_VECTOR_RDSAE: s := s + ' {rd-sae}';
OTVE_VECTOR_RUSAE: s := s + ' {ru-sae}';
OTVE_VECTOR_RZSAE: s := s + ' {rz-sae}';
end;
end;
end;
end;
GetString:=s+']';
end;
procedure taicpu.Swapoperands;
var
p : POper;
begin
{ Fix the operands which are in AT&T style and we need them in Intel style }
case ops of
0,1:
;
2 : begin
{ 0,1 -> 1,0 }
p:=oper[0];
oper[0]:=oper[1];
oper[1]:=p;
end;
3 : begin
{ 0,1,2 -> 2,1,0 }
p:=oper[0];
oper[0]:=oper[2];
oper[2]:=p;
end;
4 : begin
{ 0,1,2,3 -> 3,2,1,0 }
p:=oper[0];
oper[0]:=oper[3];
oper[3]:=p;
p:=oper[1];
oper[1]:=oper[2];
oper[2]:=p;
end;
else
internalerror(201108141);
end;
end;
procedure taicpu.SetOperandOrder(order:TOperandOrder);
begin
if FOperandOrder<>order then
begin
Swapoperands;
FOperandOrder:=order;
end;
end;
function taicpu.FixNonCommutativeOpcodes: tasmop;
begin
result:=opcode;
{ we need ATT order }
SetOperandOrder(op_att);
if (
(ops=2) and
(oper[0]^.typ=top_reg) and
(oper[1]^.typ=top_reg) and
{ if the first is ST and the second is also a register
it is necessarily ST1 .. ST7 }
((oper[0]^.reg=NR_ST) or
(oper[0]^.reg=NR_ST0))
) or
{ ((ops=1) and
(oper[0]^.typ=top_reg) and
(oper[0]^.reg in [R_ST1..R_ST7])) or}
(ops=0) then
begin
if opcode=A_FSUBR then
result:=A_FSUB
else if opcode=A_FSUB then
result:=A_FSUBR
else if opcode=A_FDIVR then
result:=A_FDIV
else if opcode=A_FDIV then
result:=A_FDIVR
else if opcode=A_FSUBRP then
result:=A_FSUBP
else if opcode=A_FSUBP then
result:=A_FSUBRP
else if opcode=A_FDIVRP then
result:=A_FDIVP
else if opcode=A_FDIVP then
result:=A_FDIVRP;
end;
if (
(ops=1) and
(oper[0]^.typ=top_reg) and
(getregtype(oper[0]^.reg)=R_FPUREGISTER) and
(oper[0]^.reg<>NR_ST)
) then
begin
if opcode=A_FSUBRP then
result:=A_FSUBP
else if opcode=A_FSUBP then
result:=A_FSUBRP
else if opcode=A_FDIVRP then
result:=A_FDIVP
else if opcode=A_FDIVP then
result:=A_FDIVRP;
end;
end;
{*****************************************************************************
Assembler
*****************************************************************************}
type
ea = packed record
sib_present : boolean;
bytes : byte;
size : byte;
modrm : byte;
sib : byte;
{$ifdef x86_64}
rex : byte;
{$endif x86_64}
end;
procedure taicpu.create_ot(objdata:TObjData);
{
this function will also fix some other fields which only needs to be once
}
var
i,l,relsize : longint;
currsym : TObjSymbol;
begin
if ops=0 then
exit;
{ update oper[].ot field }
for i:=0 to ops-1 do
with oper[i]^ do
begin
case typ of
top_reg :
begin
ot:=reg_ot_table[findreg_by_number(reg)];
end;
top_ref :
begin
if (ref^.refaddr in [addr_no{$ifdef x86_64},addr_tpoff{$endif x86_64}{$ifdef i386},addr_ntpoff{$endif i386}])
{$ifdef i386}
or (
(ref^.refaddr in [addr_pic,addr_tlsgd]) and
((ref^.base<>NR_NO) or (ref^.index<>NR_NO))
)
{$endif i386}
{$ifdef x86_64}
or (
(ref^.refaddr in [addr_pic,addr_pic_no_got,addr_tlsgd]) and
(ref^.base<>NR_NO)
)
{$endif x86_64}
then
begin
{ create ot field }
if (reg_ot_table[findreg_by_number(ref^.base)] and OT_REG_GPR = OT_REG_GPR) and
((reg_ot_table[findreg_by_number(ref^.index)] = OT_XMMREG) or
(reg_ot_table[findreg_by_number(ref^.index)] = OT_YMMREG) or
(reg_ot_table[findreg_by_number(ref^.index)] = OT_ZMMREG)
) then
// AVX2 - vector-memory-referenz (e.g. vgatherdpd xmm0, [rax xmm1], xmm2)
ot := (reg_ot_table[findreg_by_number(ref^.base)] and OT_REG_GPR) or
(reg_ot_table[findreg_by_number(ref^.index)])
else if (ref^.base = NR_NO) and
((reg_ot_table[findreg_by_number(ref^.index)] = OT_XMMREG) or
(reg_ot_table[findreg_by_number(ref^.index)] = OT_YMMREG) or
(reg_ot_table[findreg_by_number(ref^.index)] = OT_ZMMREG)
) then
// AVX2 - vector-memory-referenz without base-register (e.g. vgatherdpd xmm0, [xmm1], xmm2)
ot := (OT_REG_GPR) or
(reg_ot_table[findreg_by_number(ref^.index)])
else if (ot and OT_SIZE_MASK)=0 then
ot:=OT_MEMORY_ANY or opsize_2_type[i,opsize]
else
ot:=OT_MEMORY_ANY or (ot and OT_SIZE_MASK);
if (ref^.base=NR_NO) and (ref^.index=NR_NO) then
ot:=ot or OT_MEM_OFFS;
{ fix scalefactor }
if (ref^.index=NR_NO) then
ref^.scalefactor:=0
else
if (ref^.scalefactor=0) then
ref^.scalefactor:=1;
end
else
begin
{ Jumps use a relative offset which can be 8bit,
for other opcodes we always need to generate the full
32bit address }
if assigned(objdata) and
is_jmp then
begin
currsym:=objdata.symbolref(ref^.symbol);
l:=ref^.offset;
{$push}
{$r-,q-} { disable also overflow as address returns a qword for x86_64 }
if assigned(currsym) then
inc(l,currsym.address);
{$pop}
{ when it is a forward jump we need to compensate the
offset of the instruction since the previous time,
because the symbol address is then still using the
'old-style' addressing.
For backwards jumps this is not required because the
address of the symbol is already adjusted to the
new offset }
if (l>InsOffset) and (LastInsOffset<>-1) then
inc(l,InsOffset-LastInsOffset);
{ instruction size will then always become 2 (PFV) }
relsize:=(InsOffset+2)-l;
if (relsize>=-128) and (relsize<=127) and
(
not assigned(currsym) or
(currsym.objsection=objdata.currobjsec)
) then
ot:=OT_IMM8 or OT_SHORT
else
{$ifdef i8086}
ot:=OT_IMM16 or OT_NEAR;
{$else i8086}
ot:=OT_IMM32 or OT_NEAR;
{$endif i8086}
end
else
{$ifdef i8086}
if opsize=S_FAR then
ot:=OT_IMM16 or OT_FAR
else
ot:=OT_IMM16 or OT_NEAR;
{$else i8086}
ot:=OT_IMM32 or OT_NEAR;
{$endif i8086}
end;
end;
top_local :
begin
if (ot and OT_SIZE_MASK)=0 then
ot:=OT_MEMORY or opsize_2_type[i,opsize]
else
ot:=OT_MEMORY or (ot and OT_SIZE_MASK);
end;
top_const :
begin
// if opcode is a SSE or AVX-instruction then we need a
// special handling (opsize can different from const-size)
// (e.g. "pextrw reg/m16, xmmreg, imm8" =>> opsize (16 bit), const-size (8 bit)
if (InsTabMemRefSizeInfoCache^[opcode].ExistsSSEAVX) and
(not(InsTabMemRefSizeInfoCache^[opcode].ConstSize in [csiMultiple, csiUnknown])) then
begin
case InsTabMemRefSizeInfoCache^[opcode].ConstSize of
csiNoSize: ot := ot and OT_NON_SIZE or OT_IMMEDIATE;
csiMem8: ot := ot and OT_NON_SIZE or OT_IMMEDIATE or OT_BITS8;
csiMem16: ot := ot and OT_NON_SIZE or OT_IMMEDIATE or OT_BITS16;
csiMem32: ot := ot and OT_NON_SIZE or OT_IMMEDIATE or OT_BITS32;
csiMem64: ot := ot and OT_NON_SIZE or OT_IMMEDIATE or OT_BITS64;
else
;
end;
end
else
begin
{ allow 2nd, 3rd or 4th operand being a constant and expect no size for shuf* etc. }
{ further, allow AAD and AAM with imm. operand }
if (opsize=S_NO) and not((i in [1,2,3])
{$ifndef x86_64}
or ((i=0) and (opcode in [A_AAD,A_AAM]))
{$endif x86_64}
) then
message(asmr_e_invalid_opcode_and_operand);
if
{$ifdef i8086}
(longint(val)>=-128) and (val<=127) then
{$else i8086}
(opsize<>S_W) and
(aint(val)>=-128) and (val<=127) then
{$endif not i8086}
ot:=OT_IMM8 or OT_SIGNED
else
ot:=OT_IMMEDIATE or opsize_2_type[i,opsize];
if (val=1) and (i=1) then
ot := ot or OT_ONENESS;
end;
end;
top_none :
begin
{ generated when there was an error in the
assembler reader. It never happends when generating
assembler }
end;
else
internalerror(200402266);
end;
end;
end;
function taicpu.InsEnd:longint;
begin
InsEnd:=InsOffset+InsSize;
end;
function taicpu.Matches(p:PInsEntry):boolean;
{ * IF_SM stands for Size Match: any operand whose size is not
* explicitly specified by the template is `really' intended to be
* the same size as the first size-specified operand.
* Non-specification is tolerated in the input instruction, but
* _wrong_ specification is not.
*
* IF_SM2 invokes Size Match on only the first _two_ operands, for
* three-operand instructions such as SHLD: it implies that the
* first two operands must match in size, but that the third is
* required to be _unspecified_.
*
* IF_SB invokes Size Byte: operands with unspecified size in the
* template are really bytes, and so no non-byte specification in
* the input instruction will be tolerated. IF_SW similarly invokes
* Size Word, and IF_SD invokes Size Doubleword.
*
* (The default state if neither IF_SM nor IF_SM2 is specified is
* that any operand with unspecified size in the template is
* required to have unspecified size in the instruction too...)
}
var
insot,
currot: int64;
i,j,asize,oprs : longint;
insflags:tinsflags;
vopext: int64;
siz : array[0..max_operands-1] of longint;
begin
result:=false;
{ Check the opcode and operands }
if (p^.opcode<>opcode) or (p^.ops<>ops) then
exit;
{$ifdef i8086}
{ On i8086, we need to skip the i386+ version of Jcc near, if the target
cpu is earlier than 386. There's another entry, later in the table for
i8086, which simulates it with i8086 instructions:
JNcc short +3
JMP near target }
if (p^.opcode=A_Jcc) and (current_settings.cputype<cpu_386) and
(IF_386 in p^.flags) then
exit;
{$endif i8086}
for i:=0 to p^.ops-1 do
begin
insot:=p^.optypes[i];
currot:=oper[i]^.ot;
{ Check the operand flags }
if (insot and (not currot) and OT_NON_SIZE)<>0 then
exit;
// IGNORE VECTOR-MEMORY-SIZE
if insot and OT_TYPE_MASK = OT_MEMORY then
insot := insot and not(int64(OT_BITS128 or OT_BITS256 or OT_BITS512));
{ Check if the passed operand size matches with one of
the supported operand sizes }
if ((insot and OT_SIZE_MASK)<>0) and
((insot and currot and OT_SIZE_MASK)<>(currot and OT_SIZE_MASK)) then
exit;
{ "far" matches only with "far" }
if (insot and OT_FAR)<>(currot and OT_FAR) then
exit;
end;
{ Check operand sizes }
insflags:=p^.flags;
if (insflags*IF_SMASK)<>[] then
begin
{ as default an untyped size can get all the sizes, this is different
from nasm, but else we need to do a lot checking which opcodes want
size or not with the automatic size generation }
asize:=-1;
if IF_SB in insflags then
asize:=OT_BITS8
else if IF_SW in insflags then
asize:=OT_BITS16
else if IF_SD in insflags then
asize:=OT_BITS32;
if insflags*IF_ARMASK<>[] then
begin
siz[0]:=-1;
siz[1]:=-1;
siz[2]:=-1;
if IF_AR0 in insflags then
siz[0]:=asize
else if IF_AR1 in insflags then
siz[1]:=asize
else if IF_AR2 in insflags then
siz[2]:=asize
else
internalerror(2017092101);
end
else
begin
siz[0]:=asize;
siz[1]:=asize;
siz[2]:=asize;
end;
if insflags*[IF_SM,IF_SM2]<>[] then
begin
if IF_SM2 in insflags then
oprs:=2
else
oprs:=p^.ops;
for i:=0 to oprs-1 do
if ((p^.optypes[i] and OT_SIZE_MASK) <> 0) then
begin
for j:=0 to oprs-1 do
siz[j]:=p^.optypes[i] and OT_SIZE_MASK;
break;
end;
end
else
oprs:=2;
{ Check operand sizes }
for i:=0 to p^.ops-1 do
begin
insot:=p^.optypes[i];
currot:=oper[i]^.ot;
if ((insot and OT_SIZE_MASK)=0) and
((currot and OT_SIZE_MASK and (not siz[i]))<>0) and
{ Immediates can always include smaller size }
((currot and OT_IMMEDIATE)=0) and
(((insot and OT_SIZE_MASK) or siz[i])<(currot and OT_SIZE_MASK)) then
exit;
if (insot and OT_FAR)<>(currot and OT_FAR) then
exit;
end;
end;
if (InsTabMemRefSizeInfoCache^[opcode].MemRefSize in MemRefMultiples) and
(InsTabMemRefSizeInfoCache^[opcode].ExistsSSEAVX) then
begin
for i:=0 to p^.ops-1 do
begin
insot:=p^.optypes[i];
if ((insot and (OT_XMMRM or OT_REG_EXTRA_MASK)) = OT_XMMRM) OR
((insot and (OT_YMMRM or OT_REG_EXTRA_MASK)) = OT_YMMRM) OR
((insot and (OT_ZMMRM or OT_REG_EXTRA_MASK)) = OT_ZMMRM) then
begin
if (insot and OT_SIZE_MASK) = 0 then
begin
case insot and (OT_XMMRM or OT_YMMRM or OT_ZMMRM or OT_REG_EXTRA_MASK) of
OT_XMMRM: insot := insot or OT_BITS128;
OT_YMMRM: insot := insot or OT_BITS256;
OT_ZMMRM: insot := insot or OT_BITS512;
else
;
end;
end;
end;
currot:=oper[i]^.ot;
{ Check the operand flags }
if (insot and (not currot) and OT_NON_SIZE)<>0 then
exit;
{ Check if the passed operand size matches with one of
the supported operand sizes }
if ((insot and OT_SIZE_MASK)<>0) and
((insot and currot and OT_SIZE_MASK)<>(currot and OT_SIZE_MASK)) then
exit;
end;
end;
if (InsTabMemRefSizeInfoCache^[opcode].ExistsSSEAVX) then
begin
for i:=0 to p^.ops-1 do
begin
// check vectoroperand-extention e.g. {k1} {z}
vopext := 0;
if (oper[i]^.vopext and OTVE_VECTOR_WRITEMASK) = OTVE_VECTOR_WRITEMASK then
begin
vopext := vopext or OT_VECTORMASK;
if (oper[i]^.vopext and OTVE_VECTOR_ZERO) = OTVE_VECTOR_ZERO then
vopext := vopext or OT_VECTORZERO;
end;
if (oper[i]^.vopext and OTVE_VECTOR_BCST) = OTVE_VECTOR_BCST then
begin
vopext := vopext or OT_VECTORBCST;
if (InsTabMemRefSizeInfoCache^[opcode].BCSTTypes <> []) then
begin
// any opcodes needs a special handling
// default broadcast calculation is
// bmem32
// xmmreg: {1to4}
// ymmreg: {1to8}
// zmmreg: {1to16}
// bmem64
// xmmreg: {1to2}
// ymmreg: {1to4}
// zmmreg: {1to8}
// in any opcodes not exists a mmregister
// e.g. vfpclasspd k1, [RAX] {1to8}, 0
// =>> check flags
case oper[i]^.vopext and (OTVE_VECTOR_BCST2 or OTVE_VECTOR_BCST4 or OTVE_VECTOR_BCST8 or OTVE_VECTOR_BCST16) of
OTVE_VECTOR_BCST2: if not(IF_BCST2 in p^.flags) then exit;
OTVE_VECTOR_BCST4: if not(IF_BCST4 in p^.flags) then exit;
OTVE_VECTOR_BCST8: if not(IF_BCST8 in p^.flags) then exit;
OTVE_VECTOR_BCST16: if not(IF_BCST16 in p^.flags) then exit;
else exit;
end;
end;
end;
if (oper[i]^.vopext and OTVE_VECTOR_ER) = OTVE_VECTOR_ER then
vopext := vopext or OT_VECTORER;
if (oper[i]^.vopext and OTVE_VECTOR_SAE) = OTVE_VECTOR_SAE then
vopext := vopext or OT_VECTORSAE;
if p^.optypes[i] and vopext <> vopext then
exit;
end;
end;
result:=true;
end;
procedure taicpu.ResetPass1;
begin
{ we need to reset everything here, because the choosen insentry
can be invalid for a new situation where the previously optimized
insentry is not correct }
InsEntry:=nil;
InsSize:=0;
LastInsOffset:=-1;
end;
procedure taicpu.ResetPass2;
begin
{ we are here in a second pass, check if the instruction can be optimized }
if assigned(InsEntry) and
(IF_PASS2 in InsEntry^.flags) then
begin
InsEntry:=nil;
InsSize:=0;
end;
LastInsOffset:=-1;
end;
function taicpu.CheckIfValid:boolean;
begin
result:=FindInsEntry(nil);
end;
function taicpu.FindInsentry(objdata:TObjData):boolean;
var
i : longint;
begin
result:=false;
{ Things which may only be done once, not when a second pass is done to
optimize }
if (Insentry=nil) or (IF_PASS2 in InsEntry^.flags) then
begin
current_filepos:=fileinfo;
{ We need intel style operands }
SetOperandOrder(op_intel);
{ create the .ot fields }
create_ot(objdata);
{ set the file postion }
end
else
begin
{ we've already an insentry so it's valid }
result:=true;
exit;
end;
{ Lookup opcode in the table }
InsSize:=-1;
i:=instabcache^[opcode];
if i=-1 then
begin
Message1(asmw_e_opcode_not_in_table,gas_op2str[opcode]);
exit;
end;
insentry:=@instab[i];
while (insentry^.opcode=opcode) do
begin
if matches(insentry) then
begin
result:=true;
exit;
end;
inc(insentry);
end;
Message1(asmw_e_invalid_opcode_and_operands,GetString);
{ No instruction found, set insentry to nil and inssize to -1 }
insentry:=nil;
inssize:=-1;
end;
function taicpu.CheckUseEVEX: boolean;
var
i: integer;
begin
result := false;
for i := 0 to ops - 1 do
begin
if (oper[i]^.typ=top_reg) and
(getregtype(oper[i]^.reg) = R_MMREGISTER) then
if getsupreg(oper[i]^.reg)>=16 then
result := true;
if (oper[i]^.vopext and OTVE_VECTOR_MASK) <> 0 then
result := true;
end;
end;
procedure taicpu.CheckEVEXTuple(const aInput:toper; aInsEntry: pInsentry; aIsVector128, aIsVector256, aIsVector512, aIsEVEXW1: boolean);
var
i: integer;
tuplesize: integer;
memsize: integer;
begin
if EVEXTupleState = etsUnknown then
begin
EVEXTupleState := etsNotTuple;
if aInsEntry^.Flags * IF_TUPLEMASK <> [] then
begin
tuplesize := 0;
if IF_TFV in aInsEntry^.Flags then
begin
for i := 0 to aInsEntry^.ops - 1 do
if (aInsEntry^.optypes[i] and OT_BMEM32 = OT_BMEM32) then
begin
tuplesize := 4;
break;
end
else if (aInsEntry^.optypes[i] and OT_BMEM64 = OT_BMEM64) then
begin
tuplesize := 8;
break;
end
else if (aInsEntry^.optypes[i] and OT_MEMORY = OT_MEMORY) then
begin
if aIsVector512 then tuplesize := 64
else if aIsVector256 then tuplesize := 32
else tuplesize := 16;
break;
end
else if (aInsEntry^.optypes[i] and OT_REGNORM = OT_REGMEM) then
begin
if aIsVector512 then tuplesize := 64
else if aIsVector256 then tuplesize := 32
else tuplesize := 16;
break;
end;
end
else if IF_THV in aInsEntry^.Flags then
begin
for i := 0 to aInsEntry^.ops - 1 do
if (aInsEntry^.optypes[i] and OT_BMEM32 = OT_BMEM32) then
begin
tuplesize := 4;
break;
end
else if (aInsEntry^.optypes[i] and OT_REGNORM = OT_REGMEM) then
begin
if aIsVector512 then tuplesize := 32
else if aIsVector256 then tuplesize := 16
else tuplesize := 8;
break;
end
end
else if IF_TFVM in aInsEntry^.Flags then
begin
if aIsVector512 then tuplesize := 64
else if aIsVector256 then tuplesize := 32
else tuplesize := 16;
end
else
begin
memsize := 0;
for i := 0 to aInsEntry^.ops - 1 do
begin
if aInsEntry^.optypes[i] and (OT_REGNORM or OT_MEMORY) = OT_REGMEM then
begin
case aInsEntry^.optypes[i] and (OT_BITS32 or OT_BITS64) of
OT_BITS32: begin
memsize := 32;
break;
end;
OT_BITS64: begin
memsize := 64;
break;
end;
end;
end
else
case aInsEntry^.optypes[i] and (OT_MEM8 or OT_MEM16 or OT_MEM32 or OT_MEM64) of
OT_MEM8: begin
memsize := 8;
break;
end;
OT_MEM16: begin
memsize := 16;
break;
end;
OT_MEM32: begin
memsize := 32;
break;
end;
OT_MEM64: //if aIsEVEXW1 then
begin
memsize := 64;
break;
end;
end;
end;
if IF_T1S in aInsEntry^.Flags then
begin
case memsize of
8: tuplesize := 1;
16: tuplesize := 2;
else if aIsEVEXW1 then tuplesize := 8
else tuplesize := 4;
end;
end
else if IF_T1F32 in aInsEntry^.Flags then tuplesize := 4
else if IF_T1F64 in aInsEntry^.Flags then tuplesize := 8
else if IF_T2 in aInsEntry^.Flags then
begin
case aIsEVEXW1 of
false: tuplesize := 8;
else if aIsVector256 or aIsVector512 then tuplesize := 16;
end;
end
else if IF_T4 in aInsEntry^.Flags then
begin
case aIsEVEXW1 of
false: if aIsVector256 or aIsVector512 then tuplesize := 16;
else if aIsVector512 then tuplesize := 32;
end;
end
else if IF_T8 in aInsEntry^.Flags then
begin
case aIsEVEXW1 of
false: if aIsVector512 then tuplesize := 32;
else
Internalerror(2019081003);
end;
end
else if IF_THVM in aInsEntry^.Flags then
begin
tuplesize := 8; // default 128bit-vectorlength
if aIsVector256 then tuplesize := 16
else if aIsVector512 then tuplesize := 32;
end
else if IF_TQVM in aInsEntry^.Flags then
begin
tuplesize := 4; // default 128bit-vectorlength
if aIsVector256 then tuplesize := 8
else if aIsVector512 then tuplesize := 16;
end
else if IF_TOVM in aInsEntry^.Flags then
begin
tuplesize := 2; // default 128bit-vectorlength
if aIsVector256 then tuplesize := 4
else if aIsVector512 then tuplesize := 8;
end
else if IF_TMEM128 in aInsEntry^.Flags then tuplesize := 16
else if IF_TMDDUP in aInsEntry^.Flags then
begin
tuplesize := 8; // default 128bit-vectorlength
if aIsVector256 then tuplesize := 32
else if aIsVector512 then tuplesize := 64;
end;
end;;
if tuplesize > 0 then
begin
if aInput.typ = top_ref then
begin
if (aInput.ref^.offset <> 0) and
((aInput.ref^.offset mod tuplesize) = 0) and
(abs(aInput.ref^.offset) div tuplesize <= 127) then
begin
aInput.ref^.offset := aInput.ref^.offset div tuplesize;
EVEXTupleState := etsIsTuple;
end;
end;
end;
end;
end;
end;
function taicpu.Pass1(objdata:TObjData):longint;
begin
Pass1:=0;
{ Save the old offset and set the new offset }
InsOffset:=ObjData.CurrObjSec.Size;
{ Error? }
if (Insentry=nil) and (InsSize=-1) then
exit;
{ set the file postion }
current_filepos:=fileinfo;
{ Get InsEntry }
if FindInsEntry(ObjData) then
begin
{ Calculate instruction size }
InsSize:=calcsize(insentry);
if segprefix<>NR_NO then
inc(InsSize);
if NeedAddrPrefix then
inc(InsSize);
{ Fix opsize if size if forced }
if insentry^.flags*[IF_SB,IF_SW,IF_SD]<>[] then
begin
if insentry^.flags*IF_ARMASK=[] then
begin
if IF_SB in insentry^.flags then
begin
if opsize=S_NO then
opsize:=S_B;
end
else if IF_SW in insentry^.flags then
begin
if opsize=S_NO then
opsize:=S_W;
end
else if IF_SD in insentry^.flags then
begin
if opsize=S_NO then
opsize:=S_L;
end;
end;
end;
LastInsOffset:=InsOffset;
Pass1:=InsSize;
exit;
end;
LastInsOffset:=-1;
end;
const
segprefixes: array[NR_ES..NR_GS] of Byte=(
// es cs ss ds fs gs
$26, $2E, $36, $3E, $64, $65
);
procedure taicpu.Pass2(objdata:TObjData);
begin
{ error in pass1 ? }
if insentry=nil then
exit;
current_filepos:=fileinfo;
{ Segment override }
if (segprefix>=NR_ES) and (segprefix<=NR_GS) then
begin
{$ifdef i8086}
if (objdata.CPUType<>cpu_none) and (objdata.CPUType<cpu_386) and
((segprefix=NR_FS) or (segprefix=NR_GS)) then
Message(asmw_e_instruction_not_supported_by_cpu);
{$endif i8086}
objdata.writebytes(segprefixes[segprefix],1);
{ fix the offset for GenNode }
inc(InsOffset);
end
else if segprefix<>NR_NO then
InternalError(201001071);
{ Address size prefix? }
if NeedAddrPrefix then
begin
write0x67prefix(objdata);
{ fix the offset for GenNode }
inc(InsOffset);
end;
{ Generate the instruction }
GenCode(objdata);
end;
function is_64_bit_ref(const ref:treference):boolean;
begin
{$if defined(x86_64)}
result:=not is_32_bit_ref(ref);
{$elseif defined(i386) or defined(i8086)}
result:=false;
{$endif}
end;
function is_32_bit_ref(const ref:treference):boolean;
begin
{$if defined(x86_64)}
result:=(ref.refaddr=addr_no) and
(ref.base<>NR_RIP) and
(
((ref.index<>NR_NO) and (getsubreg(ref.index)=R_SUBD)) or
((ref.base<>NR_NO) and (getsubreg(ref.base)=R_SUBD))
);
{$elseif defined(i386) or defined(i8086)}
result:=not is_16_bit_ref(ref);
{$endif}
end;
function is_16_bit_ref(const ref:treference):boolean;
var
ir,br : Tregister;
isub,bsub : tsubregister;
begin
if (ref.index<>NR_NO) and (getregtype(ref.index)=R_MMREGISTER) then
exit(false);
ir:=ref.index;
br:=ref.base;
isub:=getsubreg(ir);
bsub:=getsubreg(br);
{ it's a direct address }
if (br=NR_NO) and (ir=NR_NO) then
begin
{$ifdef i8086}
result:=true;
{$else i8086}
result:=false;
{$endif}
end
else
{ it's an indirection }
begin
result := ((ir<>NR_NO) and (isub=R_SUBW)) or
((br<>NR_NO) and (bsub=R_SUBW));
end;
end;
function get_ref_address_size(const ref:treference):byte;
begin
if is_64_bit_ref(ref) then
result:=64
else if is_32_bit_ref(ref) then
result:=32
else if is_16_bit_ref(ref) then
result:=16
else
internalerror(2017101601);
end;
function get_default_segment_of_ref(const ref:treference):tregister;
begin
{ for 16-bit registers, we allow base and index to be swapped, that's
why we also we check whether ref.index=NR_BP. For 32-bit registers,
however, index=NR_EBP is encoded differently than base=NR_EBP and has
a different default segment. }
if (ref.base=NR_BP) or (ref.index=NR_BP) or
(ref.base=NR_EBP) or (ref.base=NR_ESP)
{$ifdef x86_64}
or (ref.base=NR_RBP) or (ref.base=NR_RSP)
{$endif x86_64}
then
result:=NR_SS
else
result:=NR_DS;
end;
procedure optimize_ref(var ref:treference; inlineasm: boolean);
var
ss_equals_ds: boolean;
tmpreg: TRegister;
begin
{$ifdef x86_64}
{ x86_64 in long mode ignores all segment base, limit and access rights
checks for the DS, ES and SS registers, so we can set ss_equals_ds to
true (and thus, perform stronger optimizations on the reference),
regardless of whether this is inline asm or not (so, even if the user
is doing tricks by loading different values into DS and SS, it still
doesn't matter while the processor is in long mode) }
ss_equals_ds:=True;
{$else x86_64}
{ for i8086 and i386 inline asm, we assume SS<>DS, even if we're
compiling for a memory model, where SS=DS, because the user might be
doing something tricky with the segment registers (and may have
temporarily set them differently) }
if inlineasm then
ss_equals_ds:=False
else
ss_equals_ds:=segment_regs_equal(NR_DS,NR_SS);
{$endif x86_64}
{ remove redundant segment overrides }
if (ref.segment<>NR_NO) and
((inlineasm and (ref.segment=get_default_segment_of_ref(ref))) or
((not inlineasm) and (segment_regs_equal(ref.segment,get_default_segment_of_ref(ref))))) then
ref.segment:=NR_NO;
if not is_16_bit_ref(ref) then
begin
{ Switching index to base position gives shorter assembler instructions.
Converting index*2 to base+index also gives shorter instructions. }
if (ref.base=NR_NO) and (ref.index<>NR_NO) and (ref.scalefactor<=2) and
(ss_equals_ds or (ref.segment<>NR_NO) or (ref.index<>NR_EBP))
{ do not mess with tls references, they have the (,reg,1) format on purpose
else the linker cannot resolve/replace them }
{$ifdef i386} and (ref.refaddr<>addr_tlsgd) {$endif i386} then
begin
ref.base:=ref.index;
if ref.scalefactor=2 then
ref.scalefactor:=1
else
begin
ref.index:=NR_NO;
ref.scalefactor:=0;
end;
end;
{ Switching rBP+reg to reg+rBP sometimes gives shorter instructions (if there's no offset)
On x86_64 this also works for switching r13+reg to reg+r13. }
if ((ref.base=NR_EBP) {$ifdef x86_64}or (ref.base=NR_RBP) or (ref.base=NR_R13) or (ref.base=NR_R13D){$endif}) and
(ref.index<>NR_NO) and
(ref.index<>NR_EBP) and {$ifdef x86_64}(ref.index<>NR_RBP) and (ref.index<>NR_R13) and (ref.index<>NR_R13D) and{$endif}
(ref.scalefactor<=1) and (ref.offset=0) and (ref.refaddr=addr_no) and
(ss_equals_ds or (ref.segment<>NR_NO)) then
begin
tmpreg:=ref.base;
ref.base:=ref.index;
ref.index:=tmpreg;
end;
end;
{ remove redundant segment overrides again }
if (ref.segment<>NR_NO) and
((inlineasm and (ref.segment=get_default_segment_of_ref(ref))) or
((not inlineasm) and (segment_regs_equal(ref.segment,get_default_segment_of_ref(ref))))) then
ref.segment:=NR_NO;
end;
function taicpu.NeedAddrPrefix(opidx: byte): boolean;
begin
{$if defined(x86_64)}
result:=(oper[opidx]^.typ=top_ref) and is_32_bit_ref(oper[opidx]^.ref^);
{$elseif defined(i386)}
result:=(oper[opidx]^.typ=top_ref) and is_16_bit_ref(oper[opidx]^.ref^);
{$elseif defined(i8086)}
result:=(oper[opidx]^.typ=top_ref) and is_32_bit_ref(oper[opidx]^.ref^);
{$endif}
end;
function taicpu.NeedAddrPrefix:boolean;
var
i: Integer;
begin
for i:=0 to ops-1 do
if needaddrprefix(i) then
exit(true);
result:=false;
end;
procedure badreg(r:Tregister);
begin
Message1(asmw_e_invalid_register,generic_regname(r));
end;
function regval(r:Tregister):byte;
const
intsupreg2opcode: array[0..7] of byte=
// ax cx dx bx si di bp sp -- in x86reg.dat
// ax cx dx bx sp bp si di -- needed order
(0, 1, 2, 3, 6, 7, 5, 4);
maxsupreg: array[tregistertype] of tsuperregister=
{$ifdef x86_64}
(0, 16, 9, 8, 32, 32, 8, 0, 0);
{$else x86_64}
(0, 8, 9, 8, 8, 32, 8, 0, 0);
{$endif x86_64}
var
rs: tsuperregister;
rt: tregistertype;
begin
rs:=getsupreg(r);
rt:=getregtype(r);
if (rs>=maxsupreg[rt]) then
badreg(r);
result:=rs and 7;
if (rt=R_INTREGISTER) then
begin
if (rs<8) then
result:=intsupreg2opcode[rs];
if getsubreg(r)=R_SUBH then
inc(result,4);
end;
end;
{$if defined(x86_64)}
function rexbits(r: tregister): byte;
begin
result:=0;
case getregtype(r) of
R_INTREGISTER:
if (getsupreg(r)>=RS_R8) then
{ Either B,X or R bits can be set, depending on register role in instruction.
Set all three bits here, caller will discard unnecessary ones. }
result:=result or $47
else if (getsubreg(r)=R_SUBL) and
(getsupreg(r) in [RS_RDI,RS_RSI,RS_RBP,RS_RSP]) then
result:=result or $40
else if (getsubreg(r)=R_SUBH) then
{ Not an actual REX bit, used to detect incompatible usage of
AH/BH/CH/DH }
result:=result or $80;
R_MMREGISTER:
//if getsupreg(r)>=RS_XMM8 then
// AVX512 = 32 register
// rexbit = 0 => MMRegister 0..7 or 16..23
// rexbit = 1 => MMRegister 8..15 or 24..31
if (getsupreg(r) and $08) = $08 then
result:=result or $47;
else
;
end;
end;
function process_ea_ref_64_32(const input:toper;var output:ea;rfield:longint; uselargeoffset: boolean):boolean;
var
sym : tasmsymbol;
md,s : byte;
base,index,scalefactor,
o : longint;
ir,br : Tregister;
isub,bsub : tsubregister;
begin
result:=false;
ir:=input.ref^.index;
br:=input.ref^.base;
isub:=getsubreg(ir);
bsub:=getsubreg(br);
s:=input.ref^.scalefactor;
o:=input.ref^.offset;
sym:=input.ref^.symbol;
//if ((ir<>NR_NO) and (getregtype(ir)<>R_INTREGISTER)) or
// ((br<>NR_NO) and (br<>NR_RIP) and (getregtype(br)<>R_INTREGISTER)) then
if ((ir<>NR_NO) and (getregtype(ir)=R_MMREGISTER) and (br<>NR_NO) and (getregtype(br)<>R_INTREGISTER)) or // vector memory (AVX2)
((ir<>NR_NO) and (getregtype(ir)<>R_INTREGISTER) and (getregtype(ir)<>R_MMREGISTER)) or
((br<>NR_NO) and (br<>NR_RIP) and (getregtype(br)<>R_INTREGISTER)) then
internalerror(200301081);
{ it's direct address }
if (br=NR_NO) and (ir=NR_NO) then
begin
output.sib_present:=true;
output.bytes:=4;
output.modrm:=4 or (rfield shl 3);
output.sib:=$25;
end
else if (br=NR_RIP) and (ir=NR_NO) then
begin
{ rip based }
output.sib_present:=false;
output.bytes:=4;
output.modrm:=5 or (rfield shl 3);
end
else
{ it's an indirection }
begin
if ((br=NR_RIP) and (ir<>NR_NO)) or
(ir=NR_RIP) then
message(asmw_e_illegal_use_of_rip);
{ 16 bit? }
if ((ir<>NR_NO) and (isub in [R_SUBMMX,R_SUBMMY,R_SUBMMZ]) and
(br<>NR_NO) and (bsub=R_SUBQ)
) then
begin
// vector memory (AVX2) =>> ignore
end
else if ((ir<>NR_NO) and (isub<>R_SUBQ) and (isub<>R_SUBD)) or
((br<>NR_NO) and (bsub<>R_SUBQ) and (bsub<>R_SUBD)) then
begin
message(asmw_e_16bit_32bit_not_supported);
end;
{ wrong, for various reasons }
if (ir=NR_ESP) or ((s<>1) and (s<>2) and (s<>4) and (s<>8) and (ir<>NR_NO)) then
exit;
output.rex:=output.rex or (rexbits(br) and $F1) or (rexbits(ir) and $F2);
result:=true;
{ base }
case br of
NR_R8D,
NR_EAX,
NR_R8,
NR_RAX : base:=0;
NR_R9D,
NR_ECX,
NR_R9,
NR_RCX : base:=1;
NR_R10D,
NR_EDX,
NR_R10,
NR_RDX : base:=2;
NR_R11D,
NR_EBX,
NR_R11,
NR_RBX : base:=3;
NR_R12D,
NR_ESP,
NR_R12,
NR_RSP : base:=4;
NR_R13D,
NR_EBP,
NR_R13,
NR_NO,
NR_RBP : base:=5;
NR_R14D,
NR_ESI,
NR_R14,
NR_RSI : base:=6;
NR_R15D,
NR_EDI,
NR_R15,
NR_RDI : base:=7;
else
exit;
end;
{ index }
case ir of
NR_R8D,
NR_EAX,
NR_R8,
NR_RAX,
NR_XMM0,
NR_XMM8,
NR_XMM16,
NR_XMM24,
NR_YMM0,
NR_YMM8,
NR_YMM16,
NR_YMM24,
NR_ZMM0,
NR_ZMM8,
NR_ZMM16,
NR_ZMM24: index:=0;
NR_R9D,
NR_ECX,
NR_R9,
NR_RCX,
NR_XMM1,
NR_XMM9,
NR_XMM17,
NR_XMM25,
NR_YMM1,
NR_YMM9,
NR_YMM17,
NR_YMM25,
NR_ZMM1,
NR_ZMM9,
NR_ZMM17,
NR_ZMM25: index:=1;
NR_R10D,
NR_EDX,
NR_R10,
NR_RDX,
NR_XMM2,
NR_XMM10,
NR_XMM18,
NR_XMM26,
NR_YMM2,
NR_YMM10,
NR_YMM18,
NR_YMM26,
NR_ZMM2,
NR_ZMM10,
NR_ZMM18,
NR_ZMM26: index:=2;
NR_R11D,
NR_EBX,
NR_R11,
NR_RBX,
NR_XMM3,
NR_XMM11,
NR_XMM19,
NR_XMM27,
NR_YMM3,
NR_YMM11,
NR_YMM19,
NR_YMM27,
NR_ZMM3,
NR_ZMM11,
NR_ZMM19,
NR_ZMM27: index:=3;
NR_R12D,
NR_ESP,
NR_R12,
NR_NO,
NR_XMM4,
NR_XMM12,
NR_XMM20,
NR_XMM28,
NR_YMM4,
NR_YMM12,
NR_YMM20,
NR_YMM28,
NR_ZMM4,
NR_ZMM12,
NR_ZMM20,
NR_ZMM28: index:=4;
NR_R13D,
NR_EBP,
NR_R13,
NR_RBP,
NR_XMM5,
NR_XMM13,
NR_XMM21,
NR_XMM29,
NR_YMM5,
NR_YMM13,
NR_YMM21,
NR_YMM29,
NR_ZMM5,
NR_ZMM13,
NR_ZMM21,
NR_ZMM29: index:=5;
NR_R14D,
NR_ESI,
NR_R14,
NR_RSI,
NR_XMM6,
NR_XMM14,
NR_XMM22,
NR_XMM30,
NR_YMM6,
NR_YMM14,
NR_YMM22,
NR_YMM30,
NR_ZMM6,
NR_ZMM14,
NR_ZMM22,
NR_ZMM30: index:=6;
NR_R15D,
NR_EDI,
NR_R15,
NR_RDI,
NR_XMM7,
NR_XMM15,
NR_XMM23,
NR_XMM31,
NR_YMM7,
NR_YMM15,
NR_YMM23,
NR_YMM31,
NR_ZMM7,
NR_ZMM15,
NR_ZMM23,
NR_ZMM31: index:=7;
else
exit;
end;
case s of
0,
1 : scalefactor:=0;
2 : scalefactor:=1;
4 : scalefactor:=2;
8 : scalefactor:=3;
else
exit;
end;
{ If rbp or r13 is used we must always include an offset }
if (br=NR_NO) or
((br<>NR_RBP) and (br<>NR_R13) and (br<>NR_EBP) and (br<>NR_R13D) and (o=0) and (sym=nil)) then
md:=0
else
if ((o>=-128) and (o<=127) and (sym=nil) and (not(uselargeoffset) or (o = 0))) then
md:=1
else
md:=2;
if (br=NR_NO) or (md=2) then
output.bytes:=4
else
output.bytes:=md;
{ SIB needed ? }
if (ir=NR_NO) and (br<>NR_RSP) and (br<>NR_R12) and (br<>NR_ESP) and (br<>NR_R12D) then
begin
output.sib_present:=false;
output.modrm:=(md shl 6) or (rfield shl 3) or base;
end
else
begin
output.sib_present:=true;
output.modrm:=(md shl 6) or (rfield shl 3) or 4;
output.sib:=(scalefactor shl 6) or (index shl 3) or base;
end;
end;
output.size:=1+ord(output.sib_present)+output.bytes;
result:=true;
end;
{$elseif defined(i386) or defined(i8086)}
function process_ea_ref_32(const input:toper;out output:ea;rfield:longint; uselargeoffset: boolean):boolean;
var
sym : tasmsymbol;
md,s : byte;
base,index,scalefactor,
o : longint;
ir,br : Tregister;
isub,bsub : tsubregister;
begin
result:=false;
if ((input.ref^.index<>NR_NO) and (getregtype(input.ref^.index)=R_MMREGISTER) and (input.ref^.base<>NR_NO) and (getregtype(input.ref^.base)<>R_INTREGISTER)) or // vector memory (AVX2)
((input.ref^.index<>NR_NO) and (getregtype(input.ref^.index)<>R_INTREGISTER) and (getregtype(input.ref^.index)<>R_MMREGISTER)) or
((input.ref^.base<>NR_NO) and (getregtype(input.ref^.base)<>R_INTREGISTER)) then
internalerror(200301081);
ir:=input.ref^.index;
br:=input.ref^.base;
isub:=getsubreg(ir);
bsub:=getsubreg(br);
s:=input.ref^.scalefactor;
o:=input.ref^.offset;
sym:=input.ref^.symbol;
{ it's direct address }
if (br=NR_NO) and (ir=NR_NO) then
begin
{ it's a pure offset }
output.sib_present:=false;
output.bytes:=4;
output.modrm:=5 or (rfield shl 3);
end
else
{ it's an indirection }
begin
{ 16 bit address? }
if ((ir<>NR_NO) and (isub in [R_SUBMMX,R_SUBMMY,R_SUBMMZ]) and
(br<>NR_NO) and (bsub=R_SUBD)
) then
begin
// vector memory (AVX2) =>> ignore
end
else if ((ir<>NR_NO) and (isub<>R_SUBD)) or
((br<>NR_NO) and (bsub<>R_SUBD)) then
message(asmw_e_16bit_not_supported);
{$ifdef OPTEA}
{ make single reg base }
if (br=NR_NO) and (s=1) then
begin
br:=ir;
ir:=NR_NO;
end;
{ convert [3,5,9]*EAX to EAX+[2,4,8]*EAX }
if (br=NR_NO) and
(((s=2) and (ir<>NR_ESP)) or
(s=3) or (s=5) or (s=9)) then
begin
br:=ir;
dec(s);
end;
{ swap ESP into base if scalefactor is 1 }
if (s=1) and (ir=NR_ESP) then
begin
ir:=br;
br:=NR_ESP;
end;
{$endif OPTEA}
{ wrong, for various reasons }
if (ir=NR_ESP) or ((s<>1) and (s<>2) and (s<>4) and (s<>8) and (ir<>NR_NO)) then
exit;
{ base }
case br of
NR_EAX : base:=0;
NR_ECX : base:=1;
NR_EDX : base:=2;
NR_EBX : base:=3;
NR_ESP : base:=4;
NR_NO,
NR_EBP : base:=5;
NR_ESI : base:=6;
NR_EDI : base:=7;
else
exit;
end;
{ index }
case ir of
NR_EAX,
NR_XMM0,
NR_YMM0,
NR_ZMM0: index:=0;
NR_ECX,
NR_XMM1,
NR_YMM1,
NR_ZMM1: index:=1;
NR_EDX,
NR_XMM2,
NR_YMM2,
NR_ZMM2: index:=2;
NR_EBX,
NR_XMM3,
NR_YMM3,
NR_ZMM3: index:=3;
NR_NO,
NR_XMM4,
NR_YMM4,
NR_ZMM4: index:=4;
NR_EBP,
NR_XMM5,
NR_YMM5,
NR_ZMM5: index:=5;
NR_ESI,
NR_XMM6,
NR_YMM6,
NR_ZMM6: index:=6;
NR_EDI,
NR_XMM7,
NR_YMM7,
NR_ZMM7: index:=7;
else
exit;
end;
case s of
0,
1 : scalefactor:=0;
2 : scalefactor:=1;
4 : scalefactor:=2;
8 : scalefactor:=3;
else
exit;
end;
if (br=NR_NO) or
((br<>NR_EBP) and (o=0) and (sym=nil)) then
md:=0
else
if ((o>=-128) and (o<=127) and (sym=nil) and (not(uselargeoffset) or (o = 0))) then
md:=1
else
md:=2;
if (br=NR_NO) or (md=2) then
output.bytes:=4
else
output.bytes:=md;
{ SIB needed ? }
if (ir=NR_NO) and (br<>NR_ESP) then
begin
output.sib_present:=false;
output.modrm:=(longint(md) shl 6) or (rfield shl 3) or base;
end
else
begin
output.sib_present:=true;
output.modrm:=(longint(md) shl 6) or (rfield shl 3) or 4;
output.sib:=(scalefactor shl 6) or (index shl 3) or base;
end;
end;
if output.sib_present then
output.size:=2+output.bytes
else
output.size:=1+output.bytes;
result:=true;
end;
procedure maybe_swap_index_base(var br,ir:Tregister);
var
tmpreg: Tregister;
begin
if ((br=NR_NO) or (br=NR_SI) or (br=NR_DI)) and
((ir=NR_NO) or (ir=NR_BP) or (ir=NR_BX)) then
begin
tmpreg:=br;
br:=ir;
ir:=tmpreg;
end;
end;
function process_ea_ref_16(const input:toper;out output:ea;rfield:longint; uselargeoffset: boolean):boolean;
var
sym : tasmsymbol;
md,s : byte;
base,
o : longint;
ir,br : Tregister;
isub,bsub : tsubregister;
begin
result:=false;
if ((input.ref^.index<>NR_NO) and (getregtype(input.ref^.index)<>R_INTREGISTER)) or
((input.ref^.base<>NR_NO) and (getregtype(input.ref^.base)<>R_INTREGISTER)) then
internalerror(200301081);
ir:=input.ref^.index;
br:=input.ref^.base;
isub:=getsubreg(ir);
bsub:=getsubreg(br);
s:=input.ref^.scalefactor;
o:=input.ref^.offset;
sym:=input.ref^.symbol;
{ it's a direct address }
if (br=NR_NO) and (ir=NR_NO) then
begin
{ it's a pure offset }
output.bytes:=2;
output.modrm:=6 or (rfield shl 3);
end
else
{ it's an indirection }
begin
{ 32 bit address? }
if ((ir<>NR_NO) and (isub<>R_SUBW)) or
((br<>NR_NO) and (bsub<>R_SUBW)) then
message(asmw_e_32bit_not_supported);
{ scalefactor can only be 1 in 16-bit addresses }
if (s<>1) and (ir<>NR_NO) then
exit;
maybe_swap_index_base(br,ir);
if (br=NR_BX) and (ir=NR_SI) then
base:=0
else if (br=NR_BX) and (ir=NR_DI) then
base:=1
else if (br=NR_BP) and (ir=NR_SI) then
base:=2
else if (br=NR_BP) and (ir=NR_DI) then
base:=3
else if (br=NR_NO) and (ir=NR_SI) then
base:=4
else if (br=NR_NO) and (ir=NR_DI) then
base:=5
else if (br=NR_BP) and (ir=NR_NO) then
base:=6
else if (br=NR_BX) and (ir=NR_NO) then
base:=7
else
exit;
if (base<>6) and (o=0) and (sym=nil) then
md:=0
else if ((o>=-128) and (o<=127) and (sym=nil) and (not(uselargeoffset) or (o = 0))) then
md:=1
else
md:=2;
output.bytes:=md;
output.modrm:=(longint(md) shl 6) or (rfield shl 3) or base;
end;
output.size:=1+output.bytes;
output.sib_present:=false;
result:=true;
end;
{$endif}
function process_ea(const input:toper;out output:ea;rfield:longint; uselargeoffset: boolean):boolean;
var
rv : byte;
begin
result:=false;
fillchar(output,sizeof(output),0);
{Register ?}
if (input.typ=top_reg) then
begin
rv:=regval(input.reg);
output.modrm:=$c0 or (rfield shl 3) or rv;
output.size:=1;
{$ifdef x86_64}
output.rex:=output.rex or (rexbits(input.reg) and $F1);
{$endif x86_64}
result:=true;
exit;
end;
{No register, so memory reference.}
if input.typ<>top_ref then
internalerror(200409263);
{$if defined(x86_64)}
result:=process_ea_ref_64_32(input,output,rfield, uselargeoffset);
{$elseif defined(i386) or defined(i8086)}
if is_16_bit_ref(input.ref^) then
result:=process_ea_ref_16(input,output,rfield, uselargeoffset)
else
result:=process_ea_ref_32(input,output,rfield, uselargeoffset);
{$endif}
end;
function taicpu.calcsize(p:PInsEntry):shortint;
var
codes : pchar;
c : byte;
len : shortint;
len_ea_data: shortint;
len_ea_data_evex: shortint;
mref_offset: asizeint;
ea_data : ea;
exists_evex: boolean;
exists_vex: boolean;
exists_vex_extension: boolean;
exists_prefix_66: boolean;
exists_prefix_F2: boolean;
exists_prefix_F3: boolean;
exists_l256: boolean;
exists_l512: boolean;
exists_EVEXW1: boolean;
pmref_operand: poper;
{$ifdef x86_64}
omit_rexw : boolean;
{$endif x86_64}
begin
len:=0;
len_ea_data := 0;
len_ea_data_evex:= 0;
mref_offset := 0;
pmref_operand := nil;
codes:=@p^.code[0];
exists_vex := false;
exists_vex_extension := false;
exists_prefix_66 := false;
exists_prefix_F2 := false;
exists_prefix_F3 := false;
exists_evex := false;
exists_l256 := false;
exists_l512 := false;
exists_EVEXW1 := false;
{$ifdef x86_64}
rex:=0;
omit_rexw:=false;
{$endif x86_64}
repeat
c:=ord(codes^);
inc(codes);
case c of
&0 :
break;
&1,&2,&3 :
begin
inc(codes,c);
inc(len,c);
end;
&10,&11,&12 :
begin
{$ifdef x86_64}
rex:=rex or (rexbits(oper[c-&10]^.reg) and $F1);
{$endif x86_64}
inc(codes);
inc(len);
end;
&13,&23 :
begin
inc(codes);
inc(len);
end;
&4,&5,&6,&7 :
begin
if opsize={$ifdef i8086}S_L{$else}S_W{$endif} then
inc(len,2)
else
inc(len);
end;
&14,&15,&16,
&20,&21,&22,
&24,&25,&26,&27,
&50,&51,&52 :
inc(len);
&30,&31,&32,
&37,
&60,&61,&62 :
inc(len,2);
&34,&35,&36:
begin
{$ifdef i8086}
inc(len,2);
{$else i8086}
if opsize=S_Q then
inc(len,8)
else
inc(len,4);
{$endif i8086}
end;
&44,&45,&46:
inc(len,sizeof(pint));
&54,&55,&56:
inc(len,8);
&40,&41,&42,
&70,&71,&72,
&254,&255,&256 :
inc(len,4);
&64,&65,&66:
{$ifdef i8086}
inc(len,2);
{$else i8086}
inc(len,4);
{$endif i8086}
&74,&75,&76,&77: ; // ignore vex-coded operand-idx
&320,&321,&322 :
begin
case (oper[c-&320]^.ot and OT_SIZE_MASK) of
{$if defined(i386) or defined(x86_64)}
OT_BITS16 :
{$elseif defined(i8086)}
OT_BITS32 :
{$endif}
inc(len);
{$ifdef x86_64}
OT_BITS64:
begin
rex:=rex or $48;
end;
{$endif x86_64}
end;
end;
&310 :
{$if defined(x86_64)}
{ every insentry with code 0310 must be marked with NOX86_64 }
InternalError(2011051301);
{$elseif defined(i386)}
inc(len);
{$elseif defined(i8086)}
{nothing};
{$endif}
&311 :
{$if defined(x86_64) or defined(i8086)}
inc(len)
{$endif x86_64 or i8086}
;
&324 :
{$ifndef i8086}
inc(len)
{$endif not i8086}
;
&326 :
begin
{$ifdef x86_64}
rex:=rex or $48;
{$endif x86_64}
end;
&312,
&323,
&327,
&331,&332: ;
&325:
{$ifdef i8086}
inc(len)
{$endif i8086}
;
&333:
begin
inc(len);
exists_prefix_F2 := true;
end;
&334:
begin
inc(len);
exists_prefix_F3 := true;
end;
&361:
begin
{$ifndef i8086}
inc(len);
exists_prefix_66 := true;
{$endif not i8086}
end;
&335:
{$ifdef x86_64}
omit_rexw:=true
{$endif x86_64}
;
&336,
&337: {nothing};
&100..&227 :
begin
{$ifdef x86_64}
if (c<&177) then
begin
if (oper[c and 7]^.typ=top_reg) then
begin
rex:=rex or (rexbits(oper[c and 7]^.reg) and $F4);
end;
end;
{$endif x86_64}
if (oper[(c shr 3) and 7]^.typ = top_ref) and
(oper[(c shr 3) and 7]^.ref^.offset <> 0) then
begin
if (exists_vex and exists_evex and CheckUseEVEX) or
(not(exists_vex) and exists_evex) then
begin
CheckEVEXTuple(oper[(c shr 3) and 7]^, p, not(exists_l256 or exists_l512), exists_l256, exists_l512, exists_EVEXW1);
//const aInput:toper; aInsEntry: pInsentry; aIsVector128, aIsVector256, aIsVector512, aIsEVEXW1: boolean);
end;
end;
if process_ea(oper[(c shr 3) and 7]^, ea_data, 0, EVEXTupleState = etsNotTuple) then
inc(len,ea_data.size)
else Message(asmw_e_invalid_effective_address);
{$ifdef x86_64}
rex:=rex or ea_data.rex;
{$endif x86_64}
end;
&350:
begin
exists_evex := true;
end;
&351: exists_l512 := true; // EVEX length bit 512
&352: exists_EVEXW1 := true; // EVEX W1
&362: // VEX prefix for AVX (length = 2 or 3 bytes, dependens on REX.XBW or opcode-prefix ($0F38 or $0F3A))
// =>> DEFAULT = 2 Bytes
begin
//if not(exists_vex) then
//begin
// inc(len, 2);
//end;
exists_vex := true;
end;
&363: // REX.W = 1
// =>> VEX prefix length = 3
begin
if not(exists_vex_extension) then
begin
//inc(len);
exists_vex_extension := true;
end;
end;
&364: exists_l256 := true; // VEX length bit 256
&366, // operand 2 (ymmreg) encoded immediate byte (bit 4-7)
&367: inc(len); // operand 3 (ymmreg) encoded immediate byte (bit 4-7)
&370: // VEX-Extension prefix $0F
// ignore for calculating length
;
&371, // VEX-Extension prefix $0F38
&372: // VEX-Extension prefix $0F3A
begin
if not(exists_vex_extension) then
begin
//inc(len);
exists_vex_extension := true;
end;
end;
&300,&301,&302:
begin
{$if defined(x86_64) or defined(i8086)}
if (oper[c and 3]^.ot and OT_SIZE_MASK)=OT_BITS32 then
inc(len);
{$endif x86_64 or i8086}
end;
else
InternalError(200603141);
end;
until false;
{$ifdef x86_64}
if ((rex and $80)<>0) and ((rex and $4F)<>0) then
Message(asmw_e_bad_reg_with_rex);
rex:=rex and $4F; { reset extra bits in upper nibble }
if omit_rexw then
begin
if rex=$48 then { remove rex entirely? }
rex:=0
else
rex:=rex and $F7;
end;
if not(exists_vex or exists_evex) then
begin
if rex<>0 then
Inc(len);
end;
{$endif}
if exists_evex and
exists_vex then
begin
if CheckUseEVEX then
begin
inc(len, 4);
end
else
begin
inc(len, 2);
if exists_vex_extension then inc(len);
{$ifdef x86_64}
if not(exists_vex_extension) then
if rex and $0B <> 0 then inc(len); // REX.WXB <> 0 =>> needed VEX-Extension
{$endif x86_64}
end;
if exists_prefix_66 then dec(len);
if exists_prefix_F2 then dec(len);
if exists_prefix_F3 then dec(len);
end
else if exists_evex then
begin
inc(len, 4);
if exists_prefix_66 then dec(len);
if exists_prefix_F2 then dec(len);
if exists_prefix_F3 then dec(len);
end
else
begin
if exists_vex then
begin
inc(len,2);
if exists_prefix_66 then dec(len);
if exists_prefix_F2 then dec(len);
if exists_prefix_F3 then dec(len);
if exists_vex_extension then inc(len);
{$ifdef x86_64}
if not(exists_vex_extension) then
if rex and $0B <> 0 then inc(len); // REX.WXB <> 0 =>> needed VEX-Extension
{$endif x86_64}
end;
end;
calcsize:=len;
end;
procedure taicpu.write0x66prefix(objdata:TObjData);
const
b66: Byte=$66;
begin
{$ifdef i8086}
if (objdata.CPUType<>cpu_none) and (objdata.CPUType<cpu_386) then
Message(asmw_e_instruction_not_supported_by_cpu);
{$endif i8086}
objdata.writebytes(b66,1);
end;
procedure taicpu.write0x67prefix(objdata:TObjData);
const
b67: Byte=$67;
begin
{$ifdef i8086}
if (objdata.CPUType<>cpu_none) and (objdata.CPUType<cpu_386) then
Message(asmw_e_instruction_not_supported_by_cpu);
{$endif i8086}
objdata.writebytes(b67,1);
end;
procedure taicpu.gencode(objdata: TObjData);
{
* the actual codes (C syntax, i.e. octal):
* \0 - terminates the code. (Unless it's a literal of course.)
* \1, \2, \3 - that many literal bytes follow in the code stream
* \4, \6 - the POP/PUSH (respectively) codes for CS, DS, ES, SS
* (POP is never used for CS) depending on operand 0
* \5, \7 - the second byte of POP/PUSH codes for FS, GS, depending
* on operand 0
* \10, \11, \12 - a literal byte follows in the code stream, to be added
* to the register value of operand 0, 1 or 2
* \13 - a literal byte follows in the code stream, to be added
* to the condition code value of the instruction.
* \14, \15, \16 - a signed byte immediate operand, from operand 0, 1 or 2
* \20, \21, \22 - a byte immediate operand, from operand 0, 1 or 2
* \23 - a literal byte follows in the code stream, to be added
* to the inverted condition code value of the instruction
* (inverted version of \13).
* \24, \25, \26, \27 - an unsigned byte immediate operand, from operand 0, 1, 2 or 3
* \30, \31, \32 - a word immediate operand, from operand 0, 1 or 2
* \34, \35, \36 - select between \3[012] and \4[012] depending on 16/32 bit
* assembly mode or the address-size override on the operand
* \37 - a word constant, from the _segment_ part of operand 0
* \40, \41, \42 - a long immediate operand, from operand 0, 1 or 2
* \44, \45, \46 - select between \3[012], \4[012] or \5[456] depending
on the address size of instruction
* \50, \51, \52 - a byte relative operand, from operand 0, 1 or 2
* \54, \55, \56 - a qword immediate, from operand 0, 1 or 2
* \60, \61, \62 - a word relative operand, from operand 0, 1 or 2
* \64, \65, \66 - select between \6[012] and \7[012] depending on 16/32 bit
* assembly mode or the address-size override on the operand
* \70, \71, \72 - a long relative operand, from operand 0, 1 or 2
* \74, \75, \76 - a vex-coded vector operand, from operand 0, 1 or 2
* \1ab - a ModRM, calculated on EA in operand a, with the spare
* field the register value of operand b.
* \2ab - a ModRM, calculated on EA in operand a, with the spare
* field equal to digit b.
* \254,\255,\256 - a signed 32-bit immediate to be extended to 64 bits
* \300,\301,\302 - might be an 0x67, depending on the address size of
* the memory reference in operand x.
* \310 - indicates fixed 16-bit address size, i.e. optional 0x67.
* \311 - indicates fixed 32-bit address size, i.e. optional 0x67.
* \312 - (disassembler only) invalid with non-default address size.
* \320,\321,\322 - might be an 0x66 or 0x48 byte, depending on the operand
* size of operand x.
* \324 - indicates fixed 16-bit operand size, i.e. optional 0x66.
* \325 - indicates fixed 32-bit operand size, i.e. optional 0x66.
* \326 - indicates fixed 64-bit operand size, i.e. optional 0x48.
* \327 - indicates that this instruction is only valid when the
* operand size is the default (instruction to disassembler,
* generates no code in the assembler)
* \331 - instruction not valid with REP prefix. Hint for
* disassembler only; for SSE instructions.
* \332 - disassemble a rep (0xF3 byte) prefix as repe not rep.
* \333 - 0xF3 prefix for SSE instructions
* \334 - 0xF2 prefix for SSE instructions
* \335 - Indicates 64-bit operand size with REX.W not necessary / 64-bit scalar vector operand size
* \336 - Indicates 32-bit scalar vector operand size
* \337 - Indicates 64-bit scalar vector operand size
* \350 - EVEX prefix for AVX instructions
* \351 - EVEX Vector length 512
* \352 - EVEX W1
* \361 - 0x66 prefix for SSE instructions
* \362 - VEX prefix for AVX instructions
* \363 - VEX W1
* \364 - VEX Vector length 256
* \366 - operand 2 (ymmreg,zmmreg) encoded in bit 4-7 of the immediate byte
* \367 - operand 3 (ymmreg,zmmreg) encoded in bit 4-7 of the immediate byte
* \370 - VEX 0F-FLAG
* \371 - VEX 0F38-FLAG
* \372 - VEX 0F3A-FLAG
}
var
{$ifdef i8086}
currval : longint;
{$else i8086}
currval : aint;
{$endif i8086}
currsym : tobjsymbol;
currrelreloc,
currabsreloc,
currabsreloc32 : TObjRelocationType;
{$ifdef x86_64}
rexwritten : boolean;
{$endif x86_64}
procedure getvalsym(opidx:longint);
begin
case oper[opidx]^.typ of
top_ref :
begin
currval:=oper[opidx]^.ref^.offset;
currsym:=ObjData.symbolref(oper[opidx]^.ref^.symbol);
{$ifdef i8086}
if oper[opidx]^.ref^.refaddr=addr_seg then
begin
currrelreloc:=RELOC_SEGREL;
currabsreloc:=RELOC_SEG;
currabsreloc32:=RELOC_SEG;
end
else if oper[opidx]^.ref^.refaddr=addr_dgroup then
begin
currrelreloc:=RELOC_DGROUPREL;
currabsreloc:=RELOC_DGROUP;
currabsreloc32:=RELOC_DGROUP;
end
else if oper[opidx]^.ref^.refaddr=addr_fardataseg then
begin
currrelreloc:=RELOC_FARDATASEGREL;
currabsreloc:=RELOC_FARDATASEG;
currabsreloc32:=RELOC_FARDATASEG;
end
else
{$endif i8086}
{$ifdef i386}
if (oper[opidx]^.ref^.refaddr=addr_pic) and
(tf_pic_uses_got in target_info.flags) then
begin
currrelreloc:=RELOC_PLT32;
currabsreloc:=RELOC_GOT32;
currabsreloc32:=RELOC_GOT32;
end
else if oper[opidx]^.ref^.refaddr=addr_ntpoff then
begin
currrelreloc:=RELOC_NTPOFF;
currabsreloc:=RELOC_NTPOFF;
currabsreloc32:=RELOC_NTPOFF;
end
else if oper[opidx]^.ref^.refaddr=addr_tlsgd then
begin
currrelreloc:=RELOC_TLSGD;
currabsreloc:=RELOC_TLSGD;
currabsreloc32:=RELOC_TLSGD;
end
else
{$endif i386}
{$ifdef x86_64}
if oper[opidx]^.ref^.refaddr=addr_pic then
begin
currrelreloc:=RELOC_PLT32;
currabsreloc:=RELOC_GOTPCREL;
currabsreloc32:=RELOC_GOTPCREL;
end
else if oper[opidx]^.ref^.refaddr=addr_pic_no_got then
begin
currrelreloc:=RELOC_RELATIVE;
currabsreloc:=RELOC_RELATIVE;
currabsreloc32:=RELOC_RELATIVE;
end
else if oper[opidx]^.ref^.refaddr=addr_tpoff then
begin
currrelreloc:=RELOC_TPOFF;
currabsreloc:=RELOC_TPOFF;
currabsreloc32:=RELOC_TPOFF;
end
else if oper[opidx]^.ref^.refaddr=addr_tlsgd then
begin
currrelreloc:=RELOC_TLSGD;
currabsreloc:=RELOC_TLSGD;
currabsreloc32:=RELOC_TLSGD;
end
else
{$endif x86_64}
begin
currrelreloc:=RELOC_RELATIVE;
currabsreloc:=RELOC_ABSOLUTE;
currabsreloc32:=RELOC_ABSOLUTE32;
end;
end;
top_const :
begin
{$ifdef i8086}
currval:=longint(oper[opidx]^.val);
{$else i8086}
currval:=aint(oper[opidx]^.val);
{$endif i8086}
currsym:=nil;
currabsreloc:=RELOC_ABSOLUTE;
currabsreloc32:=RELOC_ABSOLUTE32;
end;
else
Message(asmw_e_immediate_or_reference_expected);
end;
end;
{$ifdef x86_64}
procedure maybewriterex;
begin
if (rex<>0) and not(rexwritten) then
begin
rexwritten:=true;
objdata.writebytes(rex,1);
end;
end;
{$endif x86_64}
procedure objdata_writereloc(Data:TRelocDataInt;len:aword;p:TObjSymbol;Reloctype:TObjRelocationType);
begin
{$ifdef i386}
{ Special case of '_GLOBAL_OFFSET_TABLE_'
which needs a special relocation type R_386_GOTPC }
if assigned (p) and
(p.name='_GLOBAL_OFFSET_TABLE_') and
(tf_pic_uses_got in target_info.flags) then
begin
{ nothing else than a 4 byte relocation should occur
for GOT }
if len<>4 then
Message1(asmw_e_invalid_opcode_and_operands,GetString);
Reloctype:=RELOC_GOTPC;
{ We need to add the offset of the relocation
of _GLOBAL_OFFSET_TABLE symbol within
the current instruction }
inc(data,objdata.currobjsec.size-insoffset);
end;
{$endif i386}
objdata.writereloc(data,len,p,Reloctype);
end;
const
CondVal:array[TAsmCond] of byte=($0,
$7, $3, $2, $6, $2, $4, $F, $D, $C, $E, $6, $2,
$3, $7, $3, $5, $E, $C, $D, $F, $1, $B, $9, $5,
$0, $A, $A, $B, $8, $4);
var
i: integer;
c : byte;
pb : pbyte;
codes : pchar;
bytes : array[0..3] of byte;
rfield,
data,s,opidx : longint;
ea_data : ea;
relsym : TObjSymbol;
needed_VEX_Extension: boolean;
needed_VEX: boolean;
needed_EVEX: boolean;
needed_VSIB: boolean;
opmode: integer;
VEXvvvv: byte;
VEXmmmmm: byte;
VEXw : byte;
VEXpp : byte;
VEXll : byte;
EVEXvvvv: byte;
EVEXpp: byte;
EVEXr: byte;
EVEXx: byte;
EVEXv: byte;
EVEXll: byte;
EVEXw0: byte;
EVEXw1: byte;
EVEXz : byte;
EVEXaaa : byte;
EVEXb : byte;
EVEXmm : byte;
begin
{ safety check }
if objdata.currobjsec.size<>longword(insoffset) then
internalerror(200130121);
{ those variables are initialized inside local procedures, the dfa cannot handle this yet }
currsym:=nil;
currabsreloc:=RELOC_NONE;
currabsreloc32:=RELOC_NONE;
currrelreloc:=RELOC_NONE;
currval:=0;
{ check instruction's processor level }
{ todo: maybe adapt and enable this code for i386 and x86_64 as well }
{$ifdef i8086}
if objdata.CPUType<>cpu_none then
begin
if IF_8086 in insentry^.flags then
else if IF_186 in insentry^.flags then
begin
if objdata.CPUType<cpu_186 then
Message(asmw_e_instruction_not_supported_by_cpu);
end
else if IF_286 in insentry^.flags then
begin
if objdata.CPUType<cpu_286 then
Message(asmw_e_instruction_not_supported_by_cpu);
end
else if IF_386 in insentry^.flags then
begin
if objdata.CPUType<cpu_386 then
Message(asmw_e_instruction_not_supported_by_cpu);
end
else if IF_486 in insentry^.flags then
begin
if objdata.CPUType<cpu_486 then
Message(asmw_e_instruction_not_supported_by_cpu);
end
else if IF_PENT in insentry^.flags then
begin
if objdata.CPUType<cpu_Pentium then
Message(asmw_e_instruction_not_supported_by_cpu);
end
else if IF_P6 in insentry^.flags then
begin
if objdata.CPUType<cpu_Pentium2 then
Message(asmw_e_instruction_not_supported_by_cpu);
end
else if IF_KATMAI in insentry^.flags then
begin
if objdata.CPUType<cpu_Pentium3 then
Message(asmw_e_instruction_not_supported_by_cpu);
end
else if insentry^.flags*[IF_WILLAMETTE,IF_PRESCOTT]<>[] then
begin
if objdata.CPUType<cpu_Pentium4 then
Message(asmw_e_instruction_not_supported_by_cpu);
end
else if IF_NEC in insentry^.flags then
begin
{ the NEC V20/V30 extensions are incompatible with 386+, due to overlapping opcodes }
if objdata.CPUType>=cpu_386 then
Message(asmw_e_instruction_not_supported_by_cpu);
end
else if IF_SANDYBRIDGE in insentry^.flags then
begin
{ todo: handle these properly }
end;
end;
{$endif i8086}
{ load data to write }
codes:=insentry^.code;
{$ifdef x86_64}
rexwritten:=false;
{$endif x86_64}
{ Force word push/pop for registers }
if (opsize={$ifdef i8086}S_L{$else}S_W{$endif}) and ((codes[0]=#4) or (codes[0]=#6) or
((codes[0]=#1) and ((codes[2]=#5) or (codes[2]=#7)))) then
write0x66prefix(objdata);
// needed VEX Prefix (for AVX etc.)
needed_VEX := false;
needed_EVEX := false;
needed_VEX_Extension := false;
needed_VSIB := false;
opmode := -1;
VEXvvvv := 0;
VEXmmmmm := 0;
VEXll := 0;
VEXw := 0;
VEXpp := 0;
EVEXpp := 0;
EVEXvvvv := 0;
EVEXr := 0;
EVEXx := 0;
EVEXv := 0;
EVEXll := 0;
EVEXw0 := 0;
EVEXw1 := 0;
EVEXz := 0;
EVEXaaa := 0;
EVEXb := 0;
EVEXmm := 0;
repeat
c:=ord(codes^);
inc(codes);
case c of
&0: break;
&1,
&2,
&3: inc(codes,c);
&10,
&11,
&12: inc(codes, 1);
&74: opmode := 0;
&75: opmode := 1;
&76: opmode := 2;
&100..&227: begin
// AVX 512 - EVEX
// check operands
if (c shr 6) = 1 then
begin
opidx := c and 7;
if ops > opidx then
begin
if (oper[opidx]^.typ=top_reg) then
if getsupreg(oper[opidx]^.reg) and $10 = $0 then EVEXr := 1;
end
end
else EVEXr := 1; // modrm:reg not used =>> 1
opidx := (c shr 3) and 7;
if ops > opidx then
case oper[opidx]^.typ of
top_reg: if getsupreg(oper[opidx]^.reg) and $10 = $0 then EVEXx := 1;
top_ref: begin
if getsupreg(oper[opidx]^.ref^.index) and $08 = $0 then EVEXx := 1;
if getsubreg(oper[opidx]^.ref^.index) in [R_SUBMMX,R_SUBMMY,R_SUBMMZ] then
begin
// VSIB memory addresing
if getsupreg(oper[opidx]^.ref^.index) and $10 = $0 then EVEXv := 1; // VECTOR-Index
needed_VSIB := true;
end;
end;
else
Internalerror(2019081004);
end;
end;
&333: begin
VEXvvvv := VEXvvvv OR $02; // set SIMD-prefix $F3
VEXpp := $02; // set SIMD-prefix $F3
EVEXpp := $02; // set SIMD-prefix $F3
end;
&334: begin
VEXvvvv := VEXvvvv OR $03; // set SIMD-prefix $F2
VEXpp := $03; // set SIMD-prefix $F2
EVEXpp := $03; // set SIMD-prefix $F2
end;
&350: needed_EVEX := true; // AVX512 instruction or AVX128/256/512-instruction (depended on operands [x,y,z]mm16..)
&351: EVEXll := $02; // vectorlength = 512 bits AND no scalar
&352: EVEXw1 := $01;
&361: begin
VEXvvvv := VEXvvvv OR $01; // set SIMD-prefix $66
VEXpp := $01; // set SIMD-prefix $66
EVEXpp := $01; // set SIMD-prefix $66
end;
&362: needed_VEX := true;
&363: begin
needed_VEX_Extension := true;
VEXvvvv := VEXvvvv OR (1 shl 7); // set REX.W
VEXw := 1;
end;
&364: begin
VEXvvvv := VEXvvvv OR $04; // vectorlength = 256 bits AND no scalar
VEXll := $01;
EVEXll := $01;
end;
&366,
&367: begin
opidx:=c-&364; { 0366->operand 2, 0367->operand 3 }
if (ops > opidx) and
(oper[opidx]^.typ=top_reg) and
((oper[opidx]^.ot and OT_REG_EXTRA_MASK = otf_reg_xmm) or
(oper[opidx]^.ot and OT_REG_EXTRA_MASK = otf_reg_ymm) or
(oper[opidx]^.ot and OT_REG_EXTRA_MASK = otf_reg_zmm)) then
if (getsupreg(oper[opidx]^.reg) and $10 = $0) then EVEXx := 1;
end;
&370: begin
VEXmmmmm := VEXmmmmm OR $01; // set leading opcode byte $0F
EVEXmm := $01;
end;
&371: begin
needed_VEX_Extension := true;
VEXmmmmm := VEXmmmmm OR $02; // set leading opcode byte $0F38
EVEXmm := $02;
end;
&372: begin
needed_VEX_Extension := true;
VEXmmmmm := VEXmmmmm OR $03; // set leading opcode byte $0F3A
EVEXmm := $03;
end;
end;
until false;
{$ifndef x86_64}
EVEXv := 1;
EVEXx := 1;
EVEXr := 1;
{$endif}
if needed_VEX or needed_EVEX then
begin
if (opmode > ops) or
(opmode < -1) then
begin
Internalerror(777100);
end
else if opmode = -1 then
begin
VEXvvvv := VEXvvvv or ($0F shl 3); // set VEXvvvv bits (bits 6-3) to 1
EVEXvvvv := $0F;
{$ifdef x86_64}
if not(needed_vsib) then EVEXv := 1;
{$endif x86_64}
end
else if oper[opmode]^.typ = top_reg then
begin
VEXvvvv := VEXvvvv or ((not(regval(oper[opmode]^.reg)) and $07) shl 3);
EVEXvvvv := not(regval(oper[opmode]^.reg)) and $07;
{$ifdef x86_64}
if rexbits(oper[opmode]^.reg) = 0 then VEXvvvv := VEXvvvv or (1 shl 6);
if rexbits(oper[opmode]^.reg) = 0 then EVEXvvvv := EVEXvvvv or (1 shl 3);
if getsupreg(oper[opmode]^.reg) and $10 = 0 then EVEXv := 1;
{$else}
VEXvvvv := VEXvvvv or (1 shl 6);
EVEXvvvv := EVEXvvvv or (1 shl 3);
{$endif x86_64}
end
else Internalerror(777101);
if not(needed_VEX_Extension) then
begin
{$ifdef x86_64}
if rex and $0B <> 0 then needed_VEX_Extension := true;
{$endif x86_64}
end;
//TG
if needed_EVEX and needed_VEX then
begin
needed_EVEX := false;
if CheckUseEVEX then
begin
// EVEX-Flags r,v,x indicate extended-MMregister
// Flag = 0 =>> [x,y,z]mm16..[x,y,z]mm31
// Flag = 1 =>> [x,y,z]mm00..[x,y,z]mm15
needed_EVEX := true;
needed_VEX := false;
needed_VEX_Extension := false;
end;
end;
if needed_EVEX then
begin
EVEXaaa:= 0;
EVEXz := 0;
for i := 0 to ops - 1 do
if (oper[i]^.vopext and OTVE_VECTOR_MASK) <> 0 then
begin
if oper[i]^.vopext and OTVE_VECTOR_WRITEMASK = OTVE_VECTOR_WRITEMASK then
begin
EVEXaaa := oper[i]^.vopext and $07;
if oper[i]^.vopext and OTVE_VECTOR_ZERO = OTVE_VECTOR_ZERO then EVEXz := 1;
end;
if oper[i]^.vopext and OTVE_VECTOR_BCST = OTVE_VECTOR_BCST then
begin
EVEXb := 1;
end;
// flag EVEXb is multiple use (broadcast, sae and er)
if oper[i]^.vopext and OTVE_VECTOR_SAE = OTVE_VECTOR_SAE then
begin
EVEXb := 1;
end;
if oper[i]^.vopext and OTVE_VECTOR_ER = OTVE_VECTOR_ER then
begin
EVEXb := 1;
case oper[i]^.vopext and OTVE_VECTOR_ER_MASK of
OTVE_VECTOR_RNSAE: EVEXll := 0;
OTVE_VECTOR_RDSAE: EVEXll := 1;
OTVE_VECTOR_RUSAE: EVEXll := 2;
OTVE_VECTOR_RZSAE: EVEXll := 3;
else EVEXll := 0;
end;
end;
end;
bytes[0] := $62;
bytes[1] := ((EVEXmm and $03) shl 0) or
{$ifdef x86_64}
((not(rex) and $05) shl 5) or
{$else}
(($05) shl 5) or
{$endif x86_64}
((EVEXr and $01) shl 4) or
((EVEXx and $01) shl 6);
bytes[2] := ((EVEXpp and $03) shl 0) or
((1 and $01) shl 2) or // fixed in AVX512
((EVEXvvvv and $0F) shl 3) or
((EVEXw1 and $01) shl 7);
bytes[3] := ((EVEXaaa and $07) shl 0) or
((EVEXv and $01) shl 3) or
((EVEXb and $01) shl 4) or
((EVEXll and $03) shl 5) or
((EVEXz and $01) shl 7);
objdata.writebytes(bytes,4);
end
else if needed_VEX_Extension then
begin
// VEX-Prefix-Length = 3 Bytes
{$ifdef x86_64}
VEXmmmmm := VEXmmmmm or ((not(rex) and $07) shl 5); // set REX.rxb
VEXvvvv := VEXvvvv or ((rex and $08) shl 7); // set REX.w
{$else}
VEXmmmmm := VEXmmmmm or (7 shl 5); //
{$endif x86_64}
bytes[0]:=$C4;
bytes[1]:=VEXmmmmm;
bytes[2]:=VEXvvvv;
objdata.writebytes(bytes,3);
end
else
begin
// VEX-Prefix-Length = 2 Bytes
{$ifdef x86_64}
if rex and $04 = 0 then
{$endif x86_64}
begin
VEXvvvv := VEXvvvv or (1 shl 7);
end;
bytes[0]:=$C5;
bytes[1]:=VEXvvvv;
objdata.writebytes(bytes,2);
end;
end
else
begin
needed_VEX_Extension := false;
opmode := -1;
end;
if not(needed_EVEX) then
begin
for opidx := 0 to ops - 1 do
begin
if ops > opidx then
if (oper[opidx]^.typ=top_reg) and
(getregtype(oper[opidx]^.reg) = R_MMREGISTER) then
if getsupreg(oper[opidx]^.reg) and $10 = $10 then
begin
Message1(asmw_e_invalid_opcode_and_operands,GetString);
break;
end;
//badreg(oper[opidx]^.reg);
end;
end;
{ load data to write }
codes:=insentry^.code;
repeat
c:=ord(codes^);
inc(codes);
case c of
&0 :
break;
&1,&2,&3 :
begin
{$ifdef x86_64}
if not(needed_VEX or needed_EVEX) then // TG
maybewriterex;
{$endif x86_64}
objdata.writebytes(codes^,c);
inc(codes,c);
end;
&4,&6 :
begin
case oper[0]^.reg of
NR_CS:
bytes[0]:=$e;
NR_NO,
NR_DS:
bytes[0]:=$1e;
NR_ES:
bytes[0]:=$6;
NR_SS:
bytes[0]:=$16;
else
internalerror(777004);
end;
if c=&4 then
inc(bytes[0]);
objdata.writebytes(bytes,1);
end;
&5,&7 :
begin
case oper[0]^.reg of
NR_FS:
bytes[0]:=$a0;
NR_GS:
bytes[0]:=$a8;
else
internalerror(777005);
end;
if c=&5 then
inc(bytes[0]);
objdata.writebytes(bytes,1);
end;
&10,&11,&12 :
begin
{$ifdef x86_64}
if not(needed_VEX or needed_EVEX) then // TG
maybewriterex;
{$endif x86_64}
bytes[0]:=ord(codes^)+regval(oper[c-&10]^.reg);
inc(codes);
objdata.writebytes(bytes,1);
end;
&13 :
begin
bytes[0]:=ord(codes^)+condval[condition];
inc(codes);
objdata.writebytes(bytes,1);
end;
&14,&15,&16 :
begin
getvalsym(c-&14);
if (currval<-128) or (currval>127) then
Message2(asmw_e_value_exceeds_bounds,'signed byte',tostr(currval));
if assigned(currsym) then
objdata_writereloc(currval,1,currsym,currabsreloc)
else
objdata.writebytes(currval,1);
end;
&20,&21,&22 :
begin
getvalsym(c-&20);
if (currval<-256) or (currval>255) then
Message2(asmw_e_value_exceeds_bounds,'byte',tostr(currval));
if assigned(currsym) then
objdata_writereloc(currval,1,currsym,currabsreloc)
else
objdata.writebytes(currval,1);
end;
&23 :
begin
bytes[0]:=ord(codes^)+condval[inverse_cond(condition)];
inc(codes);
objdata.writebytes(bytes,1);
end;
&24,&25,&26,&27 :
begin
getvalsym(c-&24);
if IF_IMM3 in insentry^.flags then
begin
if (currval<0) or (currval>7) then
Message2(asmw_e_value_exceeds_bounds,'unsigned triad',tostr(currval));
end
else if IF_IMM4 in insentry^.flags then
begin
if (currval<0) or (currval>15) then
Message2(asmw_e_value_exceeds_bounds,'unsigned nibble',tostr(currval));
end
else
if (currval<0) or (currval>255) then
Message2(asmw_e_value_exceeds_bounds,'unsigned byte',tostr(currval));
if assigned(currsym) then
objdata_writereloc(currval,1,currsym,currabsreloc)
else
objdata.writebytes(currval,1);
end;
&30,&31,&32 : // 030..032
begin
getvalsym(c-&30);
{$ifndef i8086}
{ currval is an aint so this cannot happen on i8086 and causes only a warning }
if (currval<-65536) or (currval>65535) then
Message2(asmw_e_value_exceeds_bounds,'word',tostr(currval));
{$endif i8086}
if assigned(currsym)
{$ifdef i8086}
or (currabsreloc in [RELOC_DGROUP,RELOC_FARDATASEG])
{$endif i8086}
then
objdata_writereloc(currval,2,currsym,currabsreloc)
else
objdata.writebytes(currval,2);
end;
&34,&35,&36 : // 034..036
{ !!! These are intended (and used in opcode table) to select depending
on address size, *not* operand size. Works by coincidence only. }
begin
getvalsym(c-&34);
{$ifdef i8086}
if assigned(currsym) then
objdata_writereloc(currval,2,currsym,currabsreloc)
else
objdata.writebytes(currval,2);
{$else i8086}
if opsize=S_Q then
begin
if assigned(currsym) then
objdata_writereloc(currval,8,currsym,currabsreloc)
else
objdata.writebytes(currval,8);
end
else
begin
if assigned(currsym) then
objdata_writereloc(currval,4,currsym,currabsreloc32)
else
objdata.writebytes(currval,4);
end
{$endif i8086}
end;
&40,&41,&42 : // 040..042
begin
getvalsym(c-&40);
if assigned(currsym)
{$ifdef i8086}
or (currabsreloc in [RELOC_DGROUP,RELOC_FARDATASEG])
{$endif i8086}
then
objdata_writereloc(currval,4,currsym,currabsreloc32)
else
objdata.writebytes(currval,4);
end;
&44,&45,&46 :// 044..046 - select between word/dword/qword depending on
begin // address size (we support only default address sizes).
getvalsym(c-&44);
{$if defined(x86_64)}
if assigned(currsym) then
objdata_writereloc(currval,8,currsym,currabsreloc)
else
objdata.writebytes(currval,8);
{$elseif defined(i386)}
if assigned(currsym) then
objdata_writereloc(currval,4,currsym,currabsreloc32)
else
objdata.writebytes(currval,4);
{$elseif defined(i8086)}
if assigned(currsym) then
objdata_writereloc(currval,2,currsym,currabsreloc)
else
objdata.writebytes(currval,2);
{$endif}
end;
&50,&51,&52 : // 050..052 - byte relative operand
begin
getvalsym(c-&50);
data:=currval-insend;
{$push}
{$r-,q-} { disable also overflow as address returns a qword for x86_64 }
if assigned(currsym) then
inc(data,currsym.address);
{$pop}
if (data>127) or (data<-128) then
Message1(asmw_e_short_jmp_out_of_range,tostr(data));
objdata.writebytes(data,1);
end;
&54,&55,&56: // 054..056 - qword immediate operand
begin
getvalsym(c-&54);
if assigned(currsym) then
objdata_writereloc(currval,8,currsym,currabsreloc)
else
objdata.writebytes(currval,8);
end;
&60,&61,&62 :
begin
getvalsym(c-&60);
{$ifdef i8086}
if assigned(currsym) then
objdata_writereloc(currval,2,currsym,currrelreloc)
else
objdata_writereloc(currval-insend,2,nil,currabsreloc)
{$else i8086}
InternalError(777006);
{$endif i8086}
end;
&64,&65,&66 : // 064..066 - select between 16/32 address mode, but we support only 32 (only 16 on i8086)
begin
getvalsym(c-&64);
{$ifdef i8086}
if assigned(currsym) then
objdata_writereloc(currval,2,currsym,currrelreloc)
else
objdata_writereloc(currval-insend,2,nil,currabsreloc)
{$else i8086}
if assigned(currsym) then
objdata_writereloc(currval,4,currsym,currrelreloc)
else
objdata_writereloc(currval-insend,4,nil,currabsreloc32)
{$endif i8086}
end;
&70,&71,&72 : // 070..072 - long relative operand
begin
getvalsym(c-&70);
if assigned(currsym) then
objdata_writereloc(currval,4,currsym,currrelreloc)
else
objdata_writereloc(currval-insend,4,nil,currabsreloc32)
end;
&74,&75,&76 : ; // 074..076 - vex-coded vector operand
// ignore
&254,&255,&256 : // 0254..0256 - dword implicitly sign-extended to 64-bit (x86_64 only)
begin
getvalsym(c-&254);
{$ifdef x86_64}
{ for i386 as aint type is longint the
following test is useless }
if (currval<low(longint)) or (currval>high(longint)) then
Message2(asmw_e_value_exceeds_bounds,'signed dword',tostr(currval));
{$endif x86_64}
if assigned(currsym) then
objdata_writereloc(currval,4,currsym,currabsreloc32)
else
objdata.writebytes(currval,4);
end;
&300,&301,&302:
begin
{$if defined(x86_64) or defined(i8086)}
if (oper[c and 3]^.ot and OT_SIZE_MASK)=OT_BITS32 then
write0x67prefix(objdata);
{$endif x86_64 or i8086}
end;
&310 : { fixed 16-bit addr }
{$if defined(x86_64)}
{ every insentry having code 0310 must be marked with NOX86_64 }
InternalError(2011051302);
{$elseif defined(i386)}
write0x67prefix(objdata);
{$elseif defined(i8086)}
{nothing};
{$endif}
&311 : { fixed 32-bit addr }
{$if defined(x86_64) or defined(i8086)}
write0x67prefix(objdata)
{$endif x86_64 or i8086}
;
&320,&321,&322 :
begin
case oper[c-&320]^.ot and OT_SIZE_MASK of
{$if defined(i386) or defined(x86_64)}
OT_BITS16 :
{$elseif defined(i8086)}
OT_BITS32 :
{$endif}
write0x66prefix(objdata);
{$ifndef x86_64}
OT_BITS64 :
Message(asmw_e_64bit_not_supported);
{$endif x86_64}
end;
end;
&323 : {no action needed};
&325:
{$ifdef i8086}
write0x66prefix(objdata);
{$else i8086}
{no action needed};
{$endif i8086}
&324,
&361:
begin
{$ifndef i8086}
if not(needed_VEX or needed_EVEX) then
write0x66prefix(objdata);
{$endif not i8086}
end;
&326 :
begin
{$ifndef x86_64}
Message(asmw_e_64bit_not_supported);
{$endif x86_64}
end;
&333 :
begin
if not(needed_VEX or needed_EVEX) then
begin
bytes[0]:=$f3;
objdata.writebytes(bytes,1);
end;
end;
&334 :
begin
if not(needed_VEX or needed_EVEX) then
begin
bytes[0]:=$f2;
objdata.writebytes(bytes,1);
end;
end;
&335:
;
&336: ; // indicates 32-bit scalar vector operand {no action needed}
&337: ; // indicates 64-bit scalar vector operand {no action needed}
&312,
&327,
&331,&332 :
begin
{ these are dissambler hints or 32 bit prefixes which
are not needed }
end;
&362..&364: ; // VEX flags =>> nothing todo
&366, &367:
begin
opidx:=c-&364; { 0366->operand 2, 0367->operand 3 }
if (needed_VEX or needed_EVEX) and
(ops=4) and
(oper[opidx]^.typ=top_reg) and
(
((oper[opidx]^.ot and OT_REG_EXTRA_MASK)=otf_reg_xmm) or
((oper[opidx]^.ot and OT_REG_EXTRA_MASK)=otf_reg_ymm) or
((oper[opidx]^.ot and OT_REG_EXTRA_MASK)=otf_reg_zmm)
) then
begin
bytes[0] := ((getsupreg(oper[opidx]^.reg) and 15) shl 4);
objdata.writebytes(bytes,1);
end
else
Internalerror(2014032001);
end;
&350..&352: ; // EVEX flags =>> nothing todo
&370..&372: ; // VEX flags =>> nothing todo
&37:
begin
{$ifdef i8086}
if assigned(currsym) then
objdata_writereloc(0,2,currsym,RELOC_SEG)
else
InternalError(2015041503);
{$else i8086}
InternalError(777006);
{$endif i8086}
end;
else
begin
{ rex should be written at this point }
{$ifdef x86_64}
if not(needed_VEX or needed_EVEX) then // TG
if (rex<>0) and not(rexwritten) then
internalerror(200603191);
{$endif x86_64}
if (c>=&100) and (c<=&227) then // 0100..0227
begin
if (c<&177) then // 0177
begin
if (oper[c and 7]^.typ=top_reg) then
rfield:=regval(oper[c and 7]^.reg)
else
rfield:=regval(oper[c and 7]^.ref^.base);
end
else
rfield:=c and 7;
opidx:=(c shr 3) and 7;
if not process_ea(oper[opidx]^,ea_data,rfield, EVEXTupleState = etsNotTuple) then
Message(asmw_e_invalid_effective_address);
pb:=@bytes[0];
pb^:=ea_data.modrm;
inc(pb);
if ea_data.sib_present then
begin
pb^:=ea_data.sib;
inc(pb);
end;
s:=pb-@bytes[0];
objdata.writebytes(bytes,s);
case ea_data.bytes of
0 : ;
1 :
begin
if (oper[opidx]^.ot and OT_MEMORY)=OT_MEMORY then
begin
currsym:=objdata.symbolref(oper[opidx]^.ref^.symbol);
{$ifdef i386}
if (oper[opidx]^.ref^.refaddr=addr_pic) and
(tf_pic_uses_got in target_info.flags) then
currabsreloc:=RELOC_GOT32
else
{$endif i386}
{$ifdef x86_64}
if oper[opidx]^.ref^.refaddr=addr_pic then
currabsreloc:=RELOC_GOTPCREL
else
{$endif x86_64}
currabsreloc:=RELOC_ABSOLUTE;
objdata_writereloc(oper[opidx]^.ref^.offset,1,currsym,currabsreloc);
end
else
begin
bytes[0]:=oper[opidx]^.ref^.offset;
objdata.writebytes(bytes,1);
end;
inc(s);
end;
2,4 :
begin
currsym:=objdata.symbolref(oper[opidx]^.ref^.symbol);
currval:=oper[opidx]^.ref^.offset;
{$ifdef x86_64}
if oper[opidx]^.ref^.refaddr=addr_pic then
currabsreloc:=RELOC_GOTPCREL
else if oper[opidx]^.ref^.refaddr=addr_tlsgd then
currabsreloc:=RELOC_TLSGD
else if oper[opidx]^.ref^.refaddr=addr_tpoff then
currabsreloc:=RELOC_TPOFF
else
if oper[opidx]^.ref^.base=NR_RIP then
begin
currabsreloc:=RELOC_RELATIVE;
{ Adjust reloc value by number of bytes following the displacement,
but not if displacement is specified by literal constant }
if Assigned(currsym) then
Dec(currval,InsEnd-objdata.CurrObjSec.Size-ea_data.bytes);
end
else
{$endif x86_64}
{$ifdef i386}
if (oper[opidx]^.ref^.refaddr=addr_pic) and
(tf_pic_uses_got in target_info.flags) then
currabsreloc:=RELOC_GOT32
else if oper[opidx]^.ref^.refaddr=addr_tlsgd then
currabsreloc:=RELOC_TLSGD
else if oper[opidx]^.ref^.refaddr=addr_ntpoff then
currabsreloc:=RELOC_NTPOFF
else
{$endif i386}
{$ifdef i8086}
if ea_data.bytes=2 then
currabsreloc:=RELOC_ABSOLUTE
else
{$endif i8086}
currabsreloc:=RELOC_ABSOLUTE32;
if (currabsreloc in [RELOC_ABSOLUTE32{$ifdef i8086},RELOC_ABSOLUTE{$endif}]) and
(Assigned(oper[opidx]^.ref^.relsymbol)) then
begin
relsym:=objdata.symbolref(oper[opidx]^.ref^.relsymbol);
if relsym.objsection=objdata.CurrObjSec then
begin
currval:=objdata.CurrObjSec.size+ea_data.bytes-relsym.offset+currval;
{$ifdef i8086}
if ea_data.bytes=4 then
currabsreloc:=RELOC_RELATIVE32
else
{$endif i8086}
currabsreloc:=RELOC_RELATIVE;
end
else
begin
currabsreloc:=RELOC_PIC_PAIR;
currval:=relsym.offset;
end;
end;
objdata_writereloc(currval,ea_data.bytes,currsym,currabsreloc);
inc(s,ea_data.bytes);
end;
end;
end
else
InternalError(777007);
end;
end;
until false;
end;
function taicpu.is_same_reg_move(regtype: Tregistertype):boolean;
begin
result:=(((opcode=A_MOV) or (opcode=A_XCHG)) and
(regtype = R_INTREGISTER) and
(ops=2) and
(oper[0]^.typ=top_reg) and
(oper[1]^.typ=top_reg) and
(oper[0]^.reg=oper[1]^.reg)
) or
({ checking the opcodes is a long "or" chain, so check first the registers which is more selective }
((regtype = R_MMREGISTER) and
(ops=2) and
(oper[0]^.typ=top_reg) and
(oper[1]^.typ=top_reg) and
(oper[0]^.reg=oper[1]^.reg)) and
(
(opcode=A_MOVSS) or (opcode=A_MOVSD) or
(opcode=A_MOVQ) or (opcode=A_MOVD) or
(opcode=A_MOVAPS) or (opcode=A_MOVAPD) or
(opcode=A_MOVUPS) or (opcode=A_MOVUPD) or
(opcode=A_MOVDQA) or (opcode=A_MOVDQU) or
(opcode=A_VMOVSS) or (opcode=A_VMOVSD) or
(opcode=A_VMOVQ) or (opcode=A_VMOVD) or
(opcode=A_VMOVAPS) or (opcode=A_VMOVAPD) or
(opcode=A_VMOVUPS) or (opcode=A_VMOVUPD) or
(opcode=A_VMOVDQA) or (opcode=A_VMOVDQU)
)
);
end;
procedure build_spilling_operation_type_table;
var
opcode : tasmop;
begin
new(operation_type_table);
fillchar(operation_type_table^,sizeof(toperation_type_table),byte(operand_read));
for opcode:=low(tasmop) to high(tasmop) do
with InsProp[opcode] do
begin
if Ch_Rop1 in Ch then
operation_type_table^[opcode,0]:=operand_read;
if Ch_Wop1 in Ch then
operation_type_table^[opcode,0]:=operand_write;
if [Ch_RWop1,Ch_Mop1]*Ch<>[] then
operation_type_table^[opcode,0]:=operand_readwrite;
if Ch_Rop2 in Ch then
operation_type_table^[opcode,1]:=operand_read;
if Ch_Wop2 in Ch then
operation_type_table^[opcode,1]:=operand_write;
if [Ch_RWop2,Ch_Mop2]*Ch<>[] then
operation_type_table^[opcode,1]:=operand_readwrite;
if Ch_Rop3 in Ch then
operation_type_table^[opcode,2]:=operand_read;
if Ch_Wop3 in Ch then
operation_type_table^[opcode,2]:=operand_write;
if [Ch_RWop3,Ch_Mop3]*Ch<>[] then
operation_type_table^[opcode,2]:=operand_readwrite;
if Ch_Rop4 in Ch then
operation_type_table^[opcode,3]:=operand_read;
if Ch_Wop4 in Ch then
operation_type_table^[opcode,3]:=operand_write;
if [Ch_RWop4,Ch_Mop4]*Ch<>[] then
operation_type_table^[opcode,3]:=operand_readwrite;
end;
end;
function taicpu.spilling_get_operation_type(opnr: longint): topertype;
begin
{ the information in the instruction table is made for the string copy
operation MOVSD so hack here (FK)
VMOVSS and VMOVSD has two and three operand flavours, this cannot modelled by x86ins.dat
so fix it here (FK)
}
if ((opcode=A_MOVSD) or (opcode=A_VMOVSS) or (opcode=A_VMOVSD)) and (ops=2) then
begin
case opnr of
0:
result:=operand_read;
1:
result:=operand_write;
else
internalerror(200506055);
end
end
{ IMUL has 1, 2 and 3-operand forms }
else if opcode=A_IMUL then
begin
case ops of
1:
if opnr=0 then
result:=operand_read
else
internalerror(2014011802);
2:
begin
case opnr of
0:
result:=operand_read;
1:
result:=operand_readwrite;
else
internalerror(2014011803);
end;
end;
3:
begin
case opnr of
0,1:
result:=operand_read;
2:
result:=operand_write;
else
internalerror(2014011804);
end;
end;
else
internalerror(2014011805);
end;
end
else
result:=operation_type_table^[opcode,opnr];
end;
function spilling_create_load(const ref:treference;r:tregister):Taicpu;
var
tmpref: treference;
begin
tmpref:=ref;
{$ifdef i8086}
if tmpref.segment=NR_SS then
tmpref.segment:=NR_NO;
{$endif i8086}
case getregtype(r) of
R_INTREGISTER :
begin
if getsubreg(r)=R_SUBH then
inc(tmpref.offset);
{ we don't need special code here for 32 bit loads on x86_64, since
those will automatically zero-extend the upper 32 bits. }
result:=taicpu.op_ref_reg(A_MOV,reg2opsize(r),tmpref,r);
end;
R_MMREGISTER :
if current_settings.fputype in fpu_avx_instructionsets then
case getsubreg(r) of
R_SUBMMD:
result:=taicpu.op_ref_reg(A_VMOVSD,S_NO,tmpref,r);
R_SUBMMS:
result:=taicpu.op_ref_reg(A_VMOVSS,S_NO,tmpref,r);
R_SUBQ,
R_SUBMMWHOLE:
result:=taicpu.op_ref_reg(A_VMOVQ,S_NO,tmpref,r);
else
internalerror(200506043);
end
else
case getsubreg(r) of
R_SUBMMD:
result:=taicpu.op_ref_reg(A_MOVSD,S_NO,tmpref,r);
R_SUBMMS:
result:=taicpu.op_ref_reg(A_MOVSS,S_NO,tmpref,r);
R_SUBQ,
R_SUBMMWHOLE:
result:=taicpu.op_ref_reg(A_MOVQ,S_NO,tmpref,r);
else
internalerror(200506043);
end;
else
internalerror(200401041);
end;
end;
function spilling_create_store(r:tregister; const ref:treference):Taicpu;
var
size: topsize;
tmpref: treference;
begin
tmpref:=ref;
{$ifdef i8086}
if tmpref.segment=NR_SS then
tmpref.segment:=NR_NO;
{$endif i8086}
case getregtype(r) of
R_INTREGISTER :
begin
if getsubreg(r)=R_SUBH then
inc(tmpref.offset);
size:=reg2opsize(r);
{$ifdef x86_64}
{ even if it's a 32 bit reg, we still have to spill 64 bits
because we often perform 64 bit operations on them }
if (size=S_L) then
begin
size:=S_Q;
r:=newreg(getregtype(r),getsupreg(r),R_SUBWHOLE);
end;
{$endif x86_64}
result:=taicpu.op_reg_ref(A_MOV,size,r,tmpref);
end;
R_MMREGISTER :
if current_settings.fputype in fpu_avx_instructionsets then
case getsubreg(r) of
R_SUBMMD:
result:=taicpu.op_reg_ref(A_VMOVSD,S_NO,r,tmpref);
R_SUBMMS:
result:=taicpu.op_reg_ref(A_VMOVSS,S_NO,r,tmpref);
R_SUBQ,
R_SUBMMWHOLE:
result:=taicpu.op_reg_ref(A_VMOVQ,S_NO,r,tmpref);
else
internalerror(200506042);
end
else
case getsubreg(r) of
R_SUBMMD:
result:=taicpu.op_reg_ref(A_MOVSD,S_NO,r,tmpref);
R_SUBMMS:
result:=taicpu.op_reg_ref(A_MOVSS,S_NO,r,tmpref);
R_SUBQ,
R_SUBMMWHOLE:
result:=taicpu.op_reg_ref(A_MOVQ,S_NO,r,tmpref);
else
internalerror(200506042);
end;
else
internalerror(200401041);
end;
end;
{$ifdef i8086}
procedure taicpu.loadsegsymbol(opidx:longint;s:tasmsymbol);
var
r: treference;
begin
reference_reset_symbol(r,s,0,1,[]);
r.refaddr:=addr_seg;
loadref(opidx,r);
end;
{$endif i8086}
{*****************************************************************************
Instruction table
*****************************************************************************}
procedure BuildInsTabCache;
var
i : longint;
begin
new(instabcache);
FillChar(instabcache^,sizeof(tinstabcache),$ff);
i:=0;
while (i<InsTabEntries) do
begin
if InsTabCache^[InsTab[i].OPcode]=-1 then
InsTabCache^[InsTab[i].OPcode]:=i;
inc(i);
end;
end;
procedure BuildInsTabMemRefSizeInfoCache;
var
AsmOp: TasmOp;
i,j: longint;
insentry : PInsEntry;
codes : pchar;
c : byte;
MRefInfo: TMemRefSizeInfo;
SConstInfo: TConstSizeInfo;
actRegSize: int64;
actMemSize: int64;
actConstSize: int64;
actRegCount: integer;
actMemCount: integer;
actConstCount: integer;
actRegTypes : int64;
actRegMemTypes: int64;
NewRegSize: int64;
actVMemCount : integer;
actVMemTypes : int64;
RegMMXSizeMask: int64;
RegXMMSizeMask: int64;
RegYMMSizeMask: int64;
RegZMMSizeMask: int64;
RegMMXConstSizeMask: int64;
RegXMMConstSizeMask: int64;
RegYMMConstSizeMask: int64;
RegZMMConstSizeMask: int64;
RegBCSTSizeMask: int64;
RegBCSTXMMSizeMask: int64;
RegBCSTYMMSizeMask: int64;
RegBCSTZMMSizeMask: int64;
ExistsMemRef : boolean;
bitcount : integer;
ExistsCode336 : boolean;
ExistsCode337 : boolean;
ExistsSSEAVXReg : boolean;
function bitcnt(aValue: int64): integer;
var
i: integer;
begin
result := 0;
for i := 0 to 63 do
begin
if (aValue mod 2) = 1 then
begin
inc(result);
end;
aValue := aValue shr 1;
end;
end;
begin
new(InsTabMemRefSizeInfoCache);
FillChar(InsTabMemRefSizeInfoCache^,sizeof(TInsTabMemRefSizeInfoCache),0);
for AsmOp := low(TAsmOp) to high(TAsmOp) do
begin
i := InsTabCache^[AsmOp];
if i >= 0 then
begin
InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize := msiUnknown;
InsTabMemRefSizeInfoCache^[AsmOp].MemRefSizeBCST := msbUnknown;
InsTabMemRefSizeInfoCache^[AsmOp].BCSTXMMMultiplicator := 0;
InsTabMemRefSizeInfoCache^[AsmOp].ConstSize := csiUnknown;
InsTabMemRefSizeInfoCache^[AsmOp].ExistsSSEAVX := false;
InsTabMemRefSizeInfoCache^[AsmOp].BCSTTypes := [];
insentry:=@instab[i];
RegMMXSizeMask := 0;
RegXMMSizeMask := 0;
RegYMMSizeMask := 0;
RegZMMSizeMask := 0;
RegMMXConstSizeMask := 0;
RegXMMConstSizeMask := 0;
RegYMMConstSizeMask := 0;
RegZMMConstSizeMask := 0;
RegBCSTSizeMask:= 0;
RegBCSTXMMSizeMask := 0;
RegBCSTYMMSizeMask := 0;
RegBCSTZMMSizeMask := 0;
ExistsMemRef := false;
while (insentry^.opcode=AsmOp) do
begin
MRefInfo := msiUnknown;
actRegSize := 0;
actRegCount := 0;
actRegTypes := 0;
NewRegSize := 0;
actMemSize := 0;
actMemCount := 0;
actRegMemTypes := 0;
actVMemCount := 0;
actVMemTypes := 0;
actConstSize := 0;
actConstCount := 0;
ExistsCode336 := false; // indicate fixed operand size 32 bit
ExistsCode337 := false; // indicate fixed operand size 64 bit
ExistsSSEAVXReg := false;
// parse insentry^.code for &336 and &337
// &336 (octal) = 222 (decimal) == fixed operand size 32 bit
// &337 (octal) = 223 (decimal) == fixed operand size 64 bit
for i := low(insentry^.code) to high(insentry^.code) do
begin
case insentry^.code[i] of
#222: ExistsCode336 := true;
#223: ExistsCode337 := true;
#0,#1,#2,#3: break;
end;
end;
for i := 0 to insentry^.ops -1 do
begin
if (insentry^.optypes[i] and OT_REGISTER) = OT_REGISTER then
case insentry^.optypes[i] and (OT_XMMREG or OT_YMMREG or OT_ZMMREG or OT_KREG or OT_REG_EXTRA_MASK) of
OT_XMMREG,
OT_YMMREG,
OT_ZMMREG: ExistsSSEAVXReg := true;
else;
end;
end;
for j := 0 to insentry^.ops -1 do
begin
if ((insentry^.optypes[j] and OT_XMEM32) = OT_XMEM32) OR
((insentry^.optypes[j] and OT_XMEM64) = OT_XMEM64) OR
((insentry^.optypes[j] and OT_YMEM32) = OT_YMEM32) OR
((insentry^.optypes[j] and OT_YMEM64) = OT_YMEM64) OR
((insentry^.optypes[j] and OT_ZMEM32) = OT_ZMEM32) OR
((insentry^.optypes[j] and OT_ZMEM64) = OT_ZMEM64) then
begin
inc(actVMemCount);
case insentry^.optypes[j] and (OT_XMEM32 OR OT_XMEM64 OR OT_YMEM32 OR OT_YMEM64 OR OT_ZMEM32 OR OT_ZMEM64) of
OT_XMEM32: actVMemTypes := actVMemTypes or OT_XMEM32;
OT_XMEM64: actVMemTypes := actVMemTypes or OT_XMEM64;
OT_YMEM32: actVMemTypes := actVMemTypes or OT_YMEM32;
OT_YMEM64: actVMemTypes := actVMemTypes or OT_YMEM64;
OT_ZMEM32: actVMemTypes := actVMemTypes or OT_ZMEM32;
OT_ZMEM64: actVMemTypes := actVMemTypes or OT_ZMEM64;
else InternalError(777206);
end;
end
else if (insentry^.optypes[j] and OT_REGISTER) = OT_REGISTER then
begin
inc(actRegCount);
NewRegSize := (insentry^.optypes[j] and OT_SIZE_MASK);
if NewRegSize = 0 then
begin
case insentry^.optypes[j] and (OT_MMXREG or OT_XMMREG or OT_YMMREG or OT_ZMMREG or OT_KREG or OT_REG_EXTRA_MASK) of
OT_MMXREG: begin
NewRegSize := OT_BITS64;
end;
OT_XMMREG: begin
NewRegSize := OT_BITS128;
InsTabMemRefSizeInfoCache^[AsmOp].ExistsSSEAVX := true;
end;
OT_YMMREG: begin
NewRegSize := OT_BITS256;
InsTabMemRefSizeInfoCache^[AsmOp].ExistsSSEAVX := true;
end;
OT_ZMMREG: begin
NewRegSize := OT_BITS512;
InsTabMemRefSizeInfoCache^[AsmOp].ExistsSSEAVX := true;
end;
OT_KREG: begin
InsTabMemRefSizeInfoCache^[AsmOp].ExistsSSEAVX := true;
end;
else NewRegSize := not(0);
end;
end;
actRegSize := actRegSize or NewRegSize;
actRegTypes := actRegTypes or (insentry^.optypes[j] and (OT_MMXREG or OT_XMMREG or OT_YMMREG or OT_ZMMREG or OT_KREG or OT_REG_EXTRA_MASK));
end
else if ((insentry^.optypes[j] and OT_MEMORY) <> 0) then
begin
inc(actMemCount);
if ExistsSSEAVXReg and ExistsCode336 then
actMemSize := actMemSize or OT_BITS32
else if ExistsSSEAVXReg and ExistsCode337 then
actMemSize := actMemSize or OT_BITS64
else
actMemSize:=actMemSize or (insentry^.optypes[j] and (OT_SIZE_MASK OR OT_VECTORBCST));
if (insentry^.optypes[j] and OT_REGMEM) = OT_REGMEM then
begin
actRegMemTypes := actRegMemTypes or insentry^.optypes[j];
end;
end
else if ((insentry^.optypes[j] and OT_IMMEDIATE) = OT_IMMEDIATE) then
begin
inc(actConstCount);
actConstSize := actConstSize or (insentry^.optypes[j] and OT_SIZE_MASK);
end
end;
if actConstCount > 0 then
begin
case actConstSize of
0: SConstInfo := csiNoSize;
OT_BITS8: SConstInfo := csiMem8;
OT_BITS16: SConstInfo := csiMem16;
OT_BITS32: SConstInfo := csiMem32;
OT_BITS64: SConstInfo := csiMem64;
else SConstInfo := csiMultiple;
end;
if InsTabMemRefSizeInfoCache^[AsmOp].ConstSize = csiUnknown then
begin
InsTabMemRefSizeInfoCache^[AsmOp].ConstSize := SConstInfo;
end
else if InsTabMemRefSizeInfoCache^[AsmOp].ConstSize <> SConstInfo then
begin
InsTabMemRefSizeInfoCache^[AsmOp].ConstSize := csiMultiple;
end;
end;
if actVMemCount > 0 then
begin
if actVMemCount = 1 then
begin
if actVMemTypes > 0 then
begin
case actVMemTypes of
OT_XMEM32: MRefInfo := msiXMem32;
OT_XMEM64: MRefInfo := msiXMem64;
OT_YMEM32: MRefInfo := msiYMem32;
OT_YMEM64: MRefInfo := msiYMem64;
OT_ZMEM32: MRefInfo := msiZMem32;
OT_ZMEM64: MRefInfo := msiZMem64;
else InternalError(777208);
end;
case actRegTypes of
OT_XMMREG: case MRefInfo of
msiXMem32,
msiXMem64: RegXMMSizeMask := RegXMMSizeMask or OT_BITS128;
msiYMem32,
msiYMem64: RegXMMSizeMask := RegXMMSizeMask or OT_BITS256;
msiZMem32,
msiZMem64: RegXMMSizeMask := RegXMMSizeMask or OT_BITS512;
else InternalError(777210);
end;
OT_YMMREG: case MRefInfo of
msiXMem32,
msiXMem64: RegYMMSizeMask := RegYMMSizeMask or OT_BITS128;
msiYMem32,
msiYMem64: RegYMMSizeMask := RegYMMSizeMask or OT_BITS256;
msiZMem32,
msiZMem64: RegYMMSizeMask := RegYMMSizeMask or OT_BITS512;
else InternalError(777211);
end;
OT_ZMMREG: case MRefInfo of
msiXMem32,
msiXMem64: RegZMMSizeMask := RegZMMSizeMask or OT_BITS128;
msiYMem32,
msiYMem64: RegZMMSizeMask := RegZMMSizeMask or OT_BITS256;
msiZMem32,
msiZMem64: RegZMMSizeMask := RegZMMSizeMask or OT_BITS512;
else InternalError(777211);
end;
//else InternalError(777209);
end;
if InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize = msiUnknown then
begin
InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize := MRefInfo;
end
else if InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize <> MRefInfo then
begin
if InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize in [msiXMem32, msiXMem64, msiYMem32, msiYMem64, msiZMem32, msiZMem64] then
begin
InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize := msiVMemMultiple;
end
else if InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize <> msiVMemMultiple then InternalError(777212);
end;
end;
end
else InternalError(777207);
end
else
begin
if (actMemCount=2) and ((AsmOp=A_MOVS) or (AsmOp=A_CMPS)) then actMemCount:=1;
ExistsMemRef := ExistsMemRef or (actMemCount > 0);
case actMemCount of
0: ; // nothing todo
1: begin
MRefInfo := msiUnknown;
if not(ExistsCode336 or ExistsCode337) then
case actRegMemTypes and (OT_MMXRM or OT_XMMRM or OT_YMMRM or OT_ZMMRM or OT_REG_EXTRA_MASK) of
OT_MMXRM: actMemSize := actMemSize or OT_BITS64;
OT_XMMRM: actMemSize := actMemSize or OT_BITS128;
OT_YMMRM: actMemSize := actMemSize or OT_BITS256;
OT_ZMMRM: actMemSize := actMemSize or OT_BITS512;
end;
case actMemSize of
0: MRefInfo := msiNoSize;
OT_BITS8: MRefInfo := msiMem8;
OT_BITS16: MRefInfo := msiMem16;
OT_BITS32: MRefInfo := msiMem32;
OT_BITSB32: MRefInfo := msiBMem32;
OT_BITS64: MRefInfo := msiMem64;
OT_BITSB64: MRefInfo := msiBMem64;
OT_BITS128: MRefInfo := msiMem128;
OT_BITS256: MRefInfo := msiMem256;
OT_BITS512: MRefInfo := msiMem512;
OT_BITS80,
OT_FAR,
OT_NEAR,
OT_SHORT: ; // ignore
else
begin
bitcount := bitcnt(actMemSize);
if bitcount > 1 then MRefInfo := msiMultiple
else InternalError(777203);
end;
end;
if InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize = msiUnknown then
begin
InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize := MRefInfo;
end
else
begin
// ignore broadcast-memory
if not(MRefInfo in [msiBMem32, msiBMem64]) then
begin
if InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize <> MRefInfo then
begin
with InsTabMemRefSizeInfoCache^[AsmOp] do
begin
if ((MemRefSize in [msiMem8, msiMULTIPLEMinSize8]) OR (MRefInfo = msiMem8)) then MemRefSize := msiMultipleMinSize8
else if ((MemRefSize in [ msiMem16, msiMULTIPLEMinSize16]) OR (MRefInfo = msiMem16)) then MemRefSize := msiMultipleMinSize16
else if ((MemRefSize in [ msiMem32, msiMULTIPLEMinSize32]) OR (MRefInfo = msiMem32)) then MemRefSize := msiMultipleMinSize32
else if ((MemRefSize in [ msiMem64, msiMULTIPLEMinSize64]) OR (MRefInfo = msiMem64)) then MemRefSize := msiMultipleMinSize64
else if ((MemRefSize in [msiMem128, msiMULTIPLEMinSize128]) OR (MRefInfo = msiMem128)) then MemRefSize := msiMultipleMinSize128
else if ((MemRefSize in [msiMem256, msiMULTIPLEMinSize256]) OR (MRefInfo = msiMem256)) then MemRefSize := msiMultipleMinSize256
else if ((MemRefSize in [msiMem512, msiMULTIPLEMinSize512]) OR (MRefInfo = msiMem512)) then MemRefSize := msiMultipleMinSize512
else MemRefSize := msiMultiple;
end;
end;
end;
end;
//if not(MRefInfo in [msiBMem32, msiBMem64]) and (actRegCount > 0) then
if actRegCount > 0 then
begin
if MRefInfo in [msiBMem32, msiBMem64] then
begin
if IF_BCST2 in insentry^.flags then InsTabMemRefSizeInfoCache^[AsmOp].BCSTTypes := InsTabMemRefSizeInfoCache^[AsmOp].BCSTTypes + [bt1to2];
if IF_BCST4 in insentry^.flags then InsTabMemRefSizeInfoCache^[AsmOp].BCSTTypes := InsTabMemRefSizeInfoCache^[AsmOp].BCSTTypes + [bt1to4];
if IF_BCST8 in insentry^.flags then InsTabMemRefSizeInfoCache^[AsmOp].BCSTTypes := InsTabMemRefSizeInfoCache^[AsmOp].BCSTTypes + [bt1to8];
if IF_BCST16 in insentry^.flags then InsTabMemRefSizeInfoCache^[AsmOp].BCSTTypes := InsTabMemRefSizeInfoCache^[AsmOp].BCSTTypes + [bt1to16];
//InsTabMemRefSizeInfoCache^[AsmOp].BCSTTypes
// BROADCAST - OPERAND
RegBCSTSizeMask := RegBCSTSizeMask or actMemSize;
case actRegTypes and (OT_XMMREG or OT_YMMREG or OT_ZMMREG or OT_REG_EXTRA_MASK) of
OT_XMMREG: RegBCSTXMMSizeMask := RegBCSTXMMSizeMask or actMemSize;
OT_YMMREG: RegBCSTYMMSizeMask := RegBCSTYMMSizeMask or actMemSize;
OT_ZMMREG: RegBCSTZMMSizeMask := RegBCSTZMMSizeMask or actMemSize;
else begin
RegBCSTXMMSizeMask := not(0);
RegBCSTYMMSizeMask := not(0);
RegBCSTZMMSizeMask := not(0);
end;
end;
end
else
case actRegTypes and (OT_MMXREG or OT_XMMREG or OT_YMMREG or OT_ZMMREG or OT_REG_EXTRA_MASK) of
OT_MMXREG: if actConstCount > 0 then RegMMXConstSizeMask := RegMMXConstSizeMask or actMemSize
else RegMMXSizeMask := RegMMXSizeMask or actMemSize;
OT_XMMREG: if actConstCount > 0 then RegXMMConstSizeMask := RegXMMConstSizeMask or actMemSize
else RegXMMSizeMask := RegXMMSizeMask or actMemSize;
OT_YMMREG: if actConstCount > 0 then RegYMMConstSizeMask := RegYMMConstSizeMask or actMemSize
else RegYMMSizeMask := RegYMMSizeMask or actMemSize;
OT_ZMMREG: if actConstCount > 0 then RegZMMConstSizeMask := RegZMMConstSizeMask or actMemSize
else RegZMMSizeMask := RegZMMSizeMask or actMemSize;
else begin
RegMMXSizeMask := not(0);
RegXMMSizeMask := not(0);
RegYMMSizeMask := not(0);
RegZMMSizeMask := not(0);
RegMMXConstSizeMask := not(0);
RegXMMConstSizeMask := not(0);
RegYMMConstSizeMask := not(0);
RegZMMConstSizeMask := not(0);
end;
end;
end
else
end
else InternalError(777202);
end;
end;
inc(insentry);
end;
if InsTabMemRefSizeInfoCache^[AsmOp].ExistsSSEAVX then
begin
case RegBCSTSizeMask of
0: ; // ignore;
OT_BITSB32: begin
InsTabMemRefSizeInfoCache^[AsmOp].MemRefSizeBCST := msbBCST32;
InsTabMemRefSizeInfoCache^[AsmOp].BCSTXMMMultiplicator := 4;
end;
OT_BITSB64: begin
InsTabMemRefSizeInfoCache^[AsmOp].MemRefSizeBCST := msbBCST64;
InsTabMemRefSizeInfoCache^[AsmOp].BCSTXMMMultiplicator := 2;
end;
else begin
InsTabMemRefSizeInfoCache^[AsmOp].MemRefSizeBCST := msbMultiple;
end;;
end;
end;
if (InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize in MemRefMultiples) and
(InsTabMemRefSizeInfoCache^[AsmOp].ExistsSSEAVX)then
begin
if InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize = msiVMemMultiple then
begin
if ((RegXMMSizeMask = OT_BITS128) or (RegXMMSizeMask = 0)) and
((RegYMMSizeMask = OT_BITS256) or (RegYMMSizeMask = 0)) and
((RegZMMSizeMask = OT_BITS512) or (RegZMMSizeMask = 0)) and
((RegXMMSizeMask or RegYMMSizeMask or RegZMMSizeMask) <> 0) then
begin
InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize := msiVMemRegSize;
end;
end
else if (RegMMXSizeMask or RegMMXConstSizeMask) <> 0 then
begin
if ((RegMMXSizeMask or RegMMXConstSizeMask) = OT_BITS64) and
((RegXMMSizeMask or RegXMMConstSizeMask) = OT_BITS128) and
((RegYMMSizeMask or RegYMMConstSizeMask) = 0) and
((RegZMMSizeMask or RegZMMConstSizeMask) = 0) then
begin
InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize := msiMemRegSize;
end;
end
else if (((RegXMMSizeMask or RegXMMConstSizeMask) = OT_BITS128) or ((RegXMMSizeMask or RegXMMConstSizeMask) = 0)) and
(((RegYMMSizeMask or RegYMMConstSizeMask) = OT_BITS256) or ((RegYMMSizeMask or RegYMMConstSizeMask) = 0)) and
(((RegZMMSizeMask or RegZMMConstSizeMask) = OT_BITS512) or ((RegZMMSizeMask or RegZMMConstSizeMask) = 0)) and
(((RegXMMSizeMask or RegXMMConstSizeMask or
RegYMMSizeMask or RegYMMConstSizeMask or
RegZMMSizeMask or RegZMMConstSizeMask)) <> 0) then
begin
InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize := msiMemRegSize;
end
else if (RegXMMSizeMask or RegXMMConstSizeMask = OT_BITS16) and
(RegYMMSizeMask or RegYMMConstSizeMask = OT_BITS32) and
(RegZMMSizeMask or RegZMMConstSizeMask = 0) then
begin
InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize := msiMemRegx16y32;
end
else if (RegXMMSizeMask or RegXMMConstSizeMask = OT_BITS16) and
(RegYMMSizeMask or RegYMMConstSizeMask = OT_BITS32) and
(RegZMMSizeMask or RegZMMConstSizeMask = OT_BITS64) then
begin
InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize := msiMemRegx16y32z64;
end
else if ((RegXMMSizeMask or RegXMMConstSizeMask) = OT_BITS32) and
((RegYMMSizeMask or RegYMMConstSizeMask) = OT_BITS64) then
begin
if ((RegZMMSizeMask or RegZMMConstSizeMask) = 0) then
begin
InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize := msiMemRegx32y64;
end
else if ((RegZMMSizeMask or RegZMMConstSizeMask) = OT_BITS128) then
begin
InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize := msiMemRegx32y64z128;
end;
end
else if ((RegXMMSizeMask or RegXMMConstSizeMask) = OT_BITS64) and
((RegYMMSizeMask or RegYMMConstSizeMask) = OT_BITS128) and
((RegZMMSizeMask or RegZMMConstSizeMask) = 0) then
begin
InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize := msiMemRegx64y128;
end
else if ((RegXMMSizeMask or RegXMMConstSizeMask) = OT_BITS64) and
((RegYMMSizeMask or RegYMMConstSizeMask) = OT_BITS128) and
((RegZMMSizeMask or RegZMMConstSizeMask) = OT_BITS256) then
begin
InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize := msiMemRegx64y128z256;
end
else if ((RegXMMSizeMask or RegXMMConstSizeMask) = OT_BITS64) and
((RegYMMSizeMask or RegYMMConstSizeMask) = OT_BITS256) and
((RegZMMSizeMask or RegZMMConstSizeMask) = 0) then
begin
InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize := msiMemRegx64y256;
end
else if ((RegXMMSizeMask or RegXMMConstSizeMask) = OT_BITS64) and
((RegYMMSizeMask or RegYMMConstSizeMask) = OT_BITS256) and
((RegZMMSizeMask or RegZMMConstSizeMask) = OT_BITS512) then
begin
InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize := msiMemRegx64y256z512;
end
else if ((RegXMMConstSizeMask = 0) or (RegXMMConstSizeMask = OT_BITS128)) and
((RegYMMConstSizeMask = 0) or (RegYMMConstSizeMask = OT_BITS256)) and
((RegZMMConstSizeMask = 0) or (RegZMMConstSizeMask = OT_BITS512)) and
((RegXMMConstSizeMask or RegYMMConstSizeMask or RegZMMConstSizeMask) <> 0) and
(
((RegXMMSizeMask or RegYMMSizeMask or RegZMMSizeMask) = OT_BITS128) or
((RegXMMSizeMask or RegYMMSizeMask or RegZMMSizeMask) = OT_BITS256) or
((RegXMMSizeMask or RegYMMSizeMask or RegZMMSizeMask) = OT_BITS512)
) then
begin
case RegXMMSizeMask or RegYMMSizeMask or RegZMMSizeMask of
OT_BITS128: InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize := msiMemRegConst128;
OT_BITS256: InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize := msiMemRegConst256;
OT_BITS512: InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize := msiMemRegConst512;
else InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize := msiMultiple;
end;
end
else
begin
if not(
(AsmOp = A_CVTSI2SS) or
(AsmOp = A_CVTSI2SD) or
(AsmOp = A_CVTPD2DQ) or
(AsmOp = A_VCVTPD2DQ) or
(AsmOp = A_VCVTPD2PS) or
(AsmOp = A_VCVTSI2SD) or
(AsmOp = A_VCVTSI2SS) or
(AsmOp = A_VCVTTPD2DQ) or
(AsmOp = A_VCVTPD2UDQ) or
(AsmOp = A_VCVTQQ2PS) or
(AsmOp = A_VCVTTPD2UDQ) or
(AsmOp = A_VCVTUQQ2PS) or
(AsmOp = A_VCVTUSI2SD) or
(AsmOp = A_VCVTUSI2SS) or
// TODO check
(AsmOp = A_VCMPSS)
) then
InternalError(777205);
end;
end
else if (InsTabMemRefSizeInfoCache^[AsmOp].ExistsSSEAVX) and
(InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize = msiUnknown) and
(not(ExistsMemRef)) then
begin
InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize := msiNoMemRef;
end;
end;
end;
for AsmOp := low(TAsmOp) to high(TAsmOp) do
begin
// only supported intructiones with SSE- or AVX-operands
if not(InsTabMemRefSizeInfoCache^[AsmOp].ExistsSSEAVX) then
begin
InsTabMemRefSizeInfoCache^[AsmOp].MemRefSize := msiUnknown;
InsTabMemRefSizeInfoCache^[AsmOp].ConstSize := csiUnknown;
end;
end;
end;
procedure InitAsm;
begin
build_spilling_operation_type_table;
if not assigned(instabcache) then
BuildInsTabCache;
if not assigned(InsTabMemRefSizeInfoCache) then
BuildInsTabMemRefSizeInfoCache;
end;
procedure DoneAsm;
begin
if assigned(operation_type_table) then
begin
dispose(operation_type_table);
operation_type_table:=nil;
end;
if assigned(instabcache) then
begin
dispose(instabcache);
instabcache:=nil;
end;
if assigned(InsTabMemRefSizeInfoCache) then
begin
dispose(InsTabMemRefSizeInfoCache);
InsTabMemRefSizeInfoCache:=nil;
end;
end;
begin
cai_align:=tai_align;
cai_cpu:=taicpu;
end.
Reference in New Issue View Git Blame Copy Permalink