fpc/compiler/arm/narmmat.pas
Jonas Maebe d1538ab023 o added ARM VPFv2/VFPv3 support:
+ RTL support:
      o VFP exceptions are disabled by default on Darwin,
        because they cause kernel panics on iPhoneOS 2.2.1 at least
      o all denormals are truncated to 0 on Darwin, because disabling
        that also causes kernel panics on iPhoneOS 2.2.1 (probably
        because otherwise denormals can also cause exceptions)
    * set softfloat rounding mode correctly for non-wince/darwin/vfp
      targets
    + compiler support: only half the number of single precision
      registers is available due to limitations of the register
      allocator
    + added a number of comments about why the stackframe on ARM is
      set up the way it is by the compiler
    + added regtype and subregtype info to regsets, because they're
      also used for VFP registers (+ support in assembler reader)
    + various generic support routines for dealing with floating point
      values located in integer registers that have to be transferred to
      mm registers (needed for VFP)
    * renamed use_sse() to use_vectorfpu() and also use it for
      ARM/vfp support
    o only superficially tested for Linux (compiler compiled with -Cpvfpv6
      -Cfvfpv2 works on a Cortex-A8, no testsuite run performed -- at least
      the fpu exception handler still needs to be implemented), Darwin has
      been tested more thoroughly
  + added ARMv6 cpu type and made it default for Darwin/ARM
  + ARMv6+ implementations of atomic operations using ldrex/strex
  * don't use r9 on Darwin/ARM, as it's reserved under certain
    circumstances (don't know yet which ones)
  * changed C-test object files for ARM/Darwin to ARMv6 versions
  * check in assembler reader that regsets are not empty, because
    instructions with a regset operand have undefined behaviour in that
    case
  * fixed resultdef of tarmtypeconvnode.first_int_to_real in case of
    int64->single type conversion
  * fixed constant pool locations in case 64 bit constants are generated,
    and/or when vfp instructions with limited reach are present

  WARNING: when using VFP on an ARMv6 or later cpu, you *must* compile all
    code with -Cparmv6 (or higher), or you will get crashes. The reason is
    that storing/restoring multiple VFP registers must happen using
    different instructions on pre/post-ARMv6.

git-svn-id: trunk@14317 -
2009-12-03 22:46:30 +00:00

300 lines
12 KiB
ObjectPascal

{
Copyright (c) 1998-2002 by Florian Klaempfl
Generate ARM assembler for math nodes
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
****************************************************************************
}
unit narmmat;
{$i fpcdefs.inc}
interface
uses
node,nmat,ncgmat;
type
tarmmoddivnode = class(tmoddivnode)
function first_moddivint: tnode;override;
procedure pass_generate_code;override;
end;
tarmnotnode = class(tcgnotnode)
procedure second_boolean;override;
end;
tarmunaryminusnode = class(tcgunaryminusnode)
procedure second_float;override;
end;
implementation
uses
globtype,systems,
cutils,verbose,globals,constexp,
aasmbase,aasmcpu,aasmtai,aasmdata,
defutil,
cgbase,cgobj,cgutils,
pass_2,procinfo,
ncon,
cpubase,cpuinfo,
ncgutil,cgcpu;
{*****************************************************************************
TARMMODDIVNODE
*****************************************************************************}
function tarmmoddivnode.first_moddivint: tnode;
var
power : longint;
begin
if (right.nodetype=ordconstn) and
(nodetype=divn) and
(ispowerof2(tordconstnode(right).value,power) or
(tordconstnode(right).value=1) or
(tordconstnode(right).value=int64(-1))
) and
not(is_64bitint(resultdef)) then
result:=nil
else
result:=inherited first_moddivint;
end;
procedure tarmmoddivnode.pass_generate_code;
var
power : longint;
numerator,
helper1,
helper2,
resultreg : tregister;
size : Tcgsize;
so : tshifterop;
procedure genOrdConstNodeDiv;
begin
if tordconstnode(right).value=0 then
internalerror(2005061701)
else if tordconstnode(right).value=1 then
cg.a_load_reg_reg(current_asmdata.CurrAsmList, OS_INT, OS_INT, numerator, resultreg)
else if (tordconstnode(right).value = int64(-1)) then
begin
// note: only in the signed case possible..., may overflow
current_asmdata.CurrAsmList.concat(setoppostfix(taicpu.op_reg_reg(A_MVN,
resultreg,numerator),toppostfix(ord(cs_check_overflow in current_settings.localswitches)*ord(PF_S))));
end
else if ispowerof2(tordconstnode(right).value,power) then
begin
if (is_signed(right.resultdef)) then
begin
helper1:=cg.getintregister(current_asmdata.CurrAsmList,OS_INT);
helper2:=cg.getintregister(current_asmdata.CurrAsmList,OS_INT);
shifterop_reset(so);
so.shiftmode:=SM_ASR;
so.shiftimm:=31;
current_asmdata.CurrAsmList.concat(taicpu.op_reg_reg_shifterop(A_MOV,helper1,numerator,so));
shifterop_reset(so);
so.shiftmode:=SM_LSR;
so.shiftimm:=32-power;
current_asmdata.CurrAsmList.concat(taicpu.op_reg_reg_reg_shifterop(A_ADD,helper2,numerator,helper1,so));
shifterop_reset(so);
so.shiftmode:=SM_ASR;
so.shiftimm:=power;
current_asmdata.CurrAsmList.concat(taicpu.op_reg_reg_shifterop(A_MOV,resultreg,helper2,so));
end
else
cg.a_op_const_reg_reg(current_asmdata.CurrAsmList,OP_SHR,OS_INT,power,numerator,resultreg)
end;
end;
{
procedure genOrdConstNodeMod;
var
modreg, maskreg, tempreg : tregister;
begin
if (tordconstnode(right).value = 0) then begin
internalerror(2005061702);
end
else if (abs(tordconstnode(right).value.svalue) = 1) then
begin
// x mod +/-1 is always zero
cg.a_load_const_reg(current_asmdata.CurrAsmList, OS_INT, 0, resultreg);
end
else if (ispowerof2(tordconstnode(right).value, power)) then
begin
if (is_signed(right.resultdef)) then begin
tempreg := cg.getintregister(current_asmdata.CurrAsmList, OS_INT);
maskreg := cg.getintregister(current_asmdata.CurrAsmList, OS_INT);
modreg := cg.getintregister(current_asmdata.CurrAsmList, OS_INT);
cg.a_load_const_reg(current_asmdata.CurrAsmList, OS_INT, abs(tordconstnode(right).value.svalue)-1, modreg);
cg.a_op_const_reg_reg(current_asmdata.CurrAsmList, OP_SAR, OS_INT, 31, numerator, maskreg);
cg.a_op_reg_reg_reg(current_asmdata.CurrAsmList, OP_AND, OS_INT, numerator, modreg, tempreg);
current_asmdata.CurrAsmList.concat(taicpu.op_reg_reg_reg(A_ANDC, maskreg, maskreg, modreg));
current_asmdata.CurrAsmList.concat(taicpu.op_reg_reg_const(A_SUBFIC, modreg, tempreg, 0));
current_asmdata.CurrAsmList.concat(taicpu.op_reg_reg_reg(A_SUBFE, modreg, modreg, modreg));
cg.a_op_reg_reg_reg(current_asmdata.CurrAsmList, OP_AND, OS_INT, modreg, maskreg, maskreg);
cg.a_op_reg_reg_reg(current_asmdata.CurrAsmList, OP_OR, OS_INT, maskreg, tempreg, resultreg);
end else begin
cg.a_op_const_reg_reg(current_asmdata.CurrAsmList, OP_AND, OS_INT, tordconstnode(right).value.svalue-1, numerator, resultreg);
end;
end else begin
genOrdConstNodeDiv();
cg.a_op_const_reg_reg(current_asmdata.CurrAsmList, OP_MUL, OS_INT, tordconstnode(right).value.svalue, resultreg, resultreg);
cg.a_op_reg_reg_reg(current_asmdata.CurrAsmList, OP_SUB, OS_INT, resultreg, numerator, resultreg);
end;
end;
}
begin
secondpass(left);
secondpass(right);
location_copy(location,left.location);
{ put numerator in register }
size:=def_cgsize(left.resultdef);
location_force_reg(current_asmdata.CurrAsmList,left.location,
size,true);
location_copy(location,left.location);
numerator:=location.register;
resultreg:=location.register;
if location.loc=LOC_CREGISTER then
begin
location.loc := LOC_REGISTER;
location.register := cg.getintregister(current_asmdata.CurrAsmList,size);
resultreg:=location.register;
end
else if (nodetype=modn) or (right.nodetype=ordconstn) then
begin
// for a modulus op, and for const nodes we need the result register
// to be an extra register
resultreg:=cg.getintregister(current_asmdata.CurrAsmList,size);
end;
if right.nodetype=ordconstn then
begin
if nodetype=divn then
genOrdConstNodeDiv
else
// genOrdConstNodeMod;
end;
location.register:=resultreg;
{ unsigned division/module can only overflow in case of division by zero }
{ (but checking this overflow flag is more convoluted than performing a }
{ simple comparison with 0) }
if is_signed(right.resultdef) then
cg.g_overflowcheck(current_asmdata.CurrAsmList,location,resultdef);
end;
{*****************************************************************************
TARMNOTNODE
*****************************************************************************}
procedure tarmnotnode.second_boolean;
var
hl : tasmlabel;
begin
{ if the location is LOC_JUMP, we do the secondpass after the
labels are allocated
}
if left.expectloc=LOC_JUMP then
begin
hl:=current_procinfo.CurrTrueLabel;
current_procinfo.CurrTrueLabel:=current_procinfo.CurrFalseLabel;
current_procinfo.CurrFalseLabel:=hl;
secondpass(left);
maketojumpbool(current_asmdata.CurrAsmList,left,lr_load_regvars);
hl:=current_procinfo.CurrTrueLabel;
current_procinfo.CurrTrueLabel:=current_procinfo.CurrFalseLabel;
current_procinfo.CurrFalseLabel:=hl;
location.loc:=LOC_JUMP;
end
else
begin
secondpass(left);
case left.location.loc of
LOC_FLAGS :
begin
location_copy(location,left.location);
inverse_flags(location.resflags);
end;
LOC_REGISTER,LOC_CREGISTER,LOC_REFERENCE,LOC_CREFERENCE,
LOC_SUBSETREG,LOC_CSUBSETREG,LOC_SUBSETREF,LOC_CSUBSETREF :
begin
location_force_reg(current_asmdata.CurrAsmList,left.location,def_cgsize(left.resultdef),true);
current_asmdata.CurrAsmList.concat(taicpu.op_reg_const(A_CMP,left.location.register,0));
location_reset(location,LOC_FLAGS,OS_NO);
location.resflags:=F_EQ;
end;
else
internalerror(2003042401);
end;
end;
end;
{*****************************************************************************
TARMUNARYMINUSNODE
*****************************************************************************}
procedure tarmunaryminusnode.second_float;
var
op: tasmop;
begin
secondpass(left);
case current_settings.fputype of
fpu_fpa,
fpu_fpa10,
fpu_fpa11:
begin
location_force_fpureg(current_asmdata.CurrAsmList,left.location,false);
location:=left.location;
current_asmdata.CurrAsmList.concat(setoppostfix(taicpu.op_reg_reg_const(A_RSF,
location.register,left.location.register,0),
cgsize2fpuoppostfix[def_cgsize(resultdef)]));
end;
fpu_vfpv2,
fpu_vfpv3:
begin
location_force_mmregscalar(current_asmdata.CurrAsmList,left.location,true);
location:=left.location;
if (left.location.loc=LOC_CMMREGISTER) then
location.register:=cg.getmmregister(current_asmdata.CurrAsmList,location.size);
if (location.size=OS_F32) then
op:=A_FNEGS
else
op:=A_FNEGD;
current_asmdata.CurrAsmList.concat(taicpu.op_reg_reg(op,
location.register,left.location.register));
end;
else
internalerror(2009112602);
end;
end;
begin
cmoddivnode:=tarmmoddivnode;
cnotnode:=tarmnotnode;
cunaryminusnode:=tarmunaryminusnode;
end.