fpc/compiler/i386/n386set.pas

1089 lines
40 KiB
ObjectPascal

{
$Id$
Copyright (c) 1998-2000 by Florian Klaempfl
Generate i386 assembler for in set/case nodes
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
****************************************************************************
}
unit n386set;
{$i defines.inc}
interface
uses
node,nset;
type
ti386setelementnode = class(tsetelementnode)
procedure pass_2;override;
end;
ti386innode = class(tinnode)
procedure pass_2;override;
end;
ti386casenode = class(tcasenode)
procedure pass_2;override;
end;
implementation
uses
globtype,systems,cpuinfo,
cobjects,verbose,globals,
symconst,symdef,aasm,types,
hcodegen,temp_gen,pass_2,
ncon,
cpubase,cpuasm,
cgai386,tgeni386,n386util;
const
bytes2Sxx:array[1..8] of Topsize=(S_B,S_W,S_NO,S_L,S_NO,S_NO,S_NO,S_Q);
{*****************************************************************************
TI386SETELEMENTNODE
*****************************************************************************}
procedure ti386setelementnode.pass_2;
begin
{ load first value in 32bit register }
secondpass(left);
if left.location.loc in [LOC_REGISTER,LOC_CREGISTER] then
emit_to_reg32(left.location.register);
{ also a second value ? }
if assigned(right) then
begin
secondpass(right);
if right.location.loc in [LOC_REGISTER,LOC_CREGISTER] then
emit_to_reg32(right.location.register);
end;
{ we doesn't modify the left side, we check only the type }
set_location(location,left.location);
end;
{*****************************************************************************
TI386INNODE
*****************************************************************************}
procedure ti386innode.pass_2;
type
Tsetpart=record
range : boolean; {Part is a range.}
start,stop : byte; {Start/stop when range; Stop=element when an element.}
end;
var
genjumps,
use_small,
pushed,
ranges : boolean;
hr,hr2,
pleftreg : tregister;
opsize : topsize;
setparts : array[1..8] of Tsetpart;
i,numparts : byte;
{href,href2 : Treference;}
l,l2 : pasmlabel;
{$ifdef CORRECT_SET_IN_FPC}
AM : tasmop;
{$endif CORRECT_SET_IN_FPC}
function analizeset(Aset:pconstset;is_small:boolean):boolean;
type
byteset=set of byte;
var
compares,maxcompares:word;
i:byte;
begin
analizeset:=false;
ranges:=false;
numparts:=0;
compares:=0;
{ Lots of comparisions take a lot of time, so do not allow
too much comparisions. 8 comparisions are, however, still
smalller than emitting the set }
if cs_littlesize in aktglobalswitches then
maxcompares:=8
else
maxcompares:=5;
{ when smallset is possible allow only 3 compares the smallset
code is for littlesize also smaller when more compares are used }
if is_small then
maxcompares:=3;
for i:=0 to 255 do
if i in byteset(Aset^) then
begin
if (numparts=0) or (i<>setparts[numparts].stop+1) then
begin
{Set element is a separate element.}
inc(compares);
if compares>maxcompares then
exit;
inc(numparts);
setparts[numparts].range:=false;
setparts[numparts].stop:=i;
end
else
{Set element is part of a range.}
if not setparts[numparts].range then
begin
{Transform an element into a range.}
setparts[numparts].range:=true;
setparts[numparts].start:=setparts[numparts].stop;
setparts[numparts].stop:=i;
inc(compares);
if compares>maxcompares then
exit;
end
else
begin
{Extend a range.}
setparts[numparts].stop:=i;
{A range of two elements can better
be checked as two separate ones.
When extending a range, our range
becomes larger than two elements.}
ranges:=true;
end;
end;
analizeset:=true;
end;
begin
{ We check first if we can generate jumps, this can be done
because the resulttype is already set in firstpass }
{ check if we can use smallset operation using btl which is limited
to 32 bits, the left side may also not contain higher values !! }
use_small:=(psetdef(right.resulttype)^.settype=smallset) and
((left.resulttype^.deftype=orddef) and (porddef(left.resulttype)^.high<=32) or
(left.resulttype^.deftype=enumdef) and (penumdef(left.resulttype)^.max<=32));
{ Can we generate jumps? Possible for all types of sets }
genjumps:=(right.nodetype=setconstn) and
analizeset(tsetconstnode(right).value_set,use_small);
{ calculate both operators }
{ the complex one first }
firstcomplex(self);
secondpass(left);
{ Only process the right if we are not generating jumps }
if not genjumps then
begin
pushed:=maybe_push(right.registers32,left,false);
secondpass(right);
if pushed then
restore(left,false);
end;
if codegenerror then
exit;
{ ofcourse not commutative }
if nf_swaped in flags then
swapleftright;
if genjumps then
begin
{ It gives us advantage to check for the set elements
separately instead of using the SET_IN_BYTE procedure.
To do: Build in support for LOC_JUMP }
{ If register is used, use only lower 8 bits }
if left.location.loc in [LOC_REGISTER,LOC_CREGISTER] then
begin
pleftreg:=left.location.register;
if pleftreg in [R_AX..R_DX] then
begin
emit_const_reg(A_AND,S_W,255,pleftreg);
opsize:=S_W;
end
else
if pleftreg in [R_EAX..R_EDI] then
begin
emit_const_reg(A_AND,S_L,255,pleftreg);
opsize:=S_L;
end
else
opsize:=S_B;
end;
{ Get a label to jump to the end }
location.loc:=LOC_FLAGS;
{ It's better to use the zero flag when there are
no ranges }
if ranges then
location.resflags:=F_C
else
location.resflags:=F_E;
getlabel(l);
for i:=1 to numparts do
if setparts[i].range then
begin
{ Check if left is in a range }
{ Get a label to jump over the check }
getlabel(l2);
if setparts[i].start=setparts[i].stop-1 then
begin
case left.location.loc of
LOC_REGISTER,
LOC_CREGISTER : emit_const_reg(A_CMP,opsize,
setparts[i].start,pleftreg);
else
emit_const_ref(A_CMP,S_B,
setparts[i].start,newreference(left.location.reference));
end;
{ Result should be in carry flag when ranges are used }
if ranges then
emit_none(A_STC,S_NO);
{ If found, jump to end }
emitjmp(C_E,l);
case left.location.loc of
LOC_REGISTER,
LOC_CREGISTER : emit_const_reg(A_CMP,opsize,
setparts[i].stop,pleftreg);
else
emit_const_ref(A_CMP,S_B,
setparts[i].stop,newreference(left.location.reference));
end;
{ Result should be in carry flag when ranges are used }
if ranges then
emit_none(A_STC,S_NO);
{ If found, jump to end }
emitjmp(C_E,l);
end
else
begin
if setparts[i].start<>0 then
begin
{ We only check for the lower bound if it is > 0, because
set elements lower than 0 dont exist }
case left.location.loc of
LOC_REGISTER,
LOC_CREGISTER :
emit_const_reg(A_CMP,opsize,
setparts[i].start,pleftreg);
else
emit_const_ref(A_CMP,S_B,
setparts[i].start,newreference(left.location.reference));
end;
{ If lower, jump to next check }
emitjmp(C_B,l2);
end;
{ We only check for the high bound if it is < 255, because
set elements higher than 255 do nt exist, the its always true,
so only a JMP is generated }
if setparts[i].stop<>255 then
begin
case left.location.loc of
LOC_REGISTER,
LOC_CREGISTER : emit_const_reg(A_CMP,opsize,
setparts[i].stop+1,pleftreg);
else
emit_const_ref(A_CMP,S_B,
setparts[i].stop+1,newreference(left.location.reference));
end;
{ If higher, element is in set }
emitjmp(C_B,l);
end
else
begin
emit_none(A_STC,S_NO);
emitjmp(C_None,l);
end;
end;
{ Emit the jump over label }
emitlab(l2);
end
else
begin
{ Emit code to check if left is an element }
case left.location.loc of
LOC_REGISTER,
LOC_CREGISTER : emit_const_reg(A_CMP,opsize,
setparts[i].stop,pleftreg);
else
emit_const_ref(A_CMP,S_B,
setparts[i].stop,newreference(left.location.reference));
end;
{ Result should be in carry flag when ranges are used }
if ranges then
emit_none(A_STC,S_NO);
{ If found, jump to end }
emitjmp(C_E,l);
end;
if ranges then
emit_none(A_CLC,S_NO);
{ To compensate for not doing a second pass }
right.location.reference.symbol:=nil;
{ Now place the end label }
emitlab(l);
case left.location.loc of
LOC_REGISTER,
LOC_CREGISTER : ungetregister(pleftreg);
else
del_reference(left.location.reference);
end;
end
else
begin
{ We will now generated code to check the set itself, no jmps,
handle smallsets separate, because it allows faster checks }
if use_small then
begin
if left.nodetype=ordconstn then
begin
location.resflags:=F_NE;
case right.location.loc of
LOC_REGISTER,
LOC_CREGISTER:
begin
emit_const_reg(A_TEST,S_L,
1 shl (tordconstnode(left).value and 31),right.location.register);
ungetregister32(right.location.register);
end
else
begin
emit_const_ref(A_TEST,S_L,1 shl (tordconstnode(left).value and 31),
newreference(right.location.reference));
del_reference(right.location.reference);
end;
end;
end
else
begin
case left.location.loc of
LOC_REGISTER,
LOC_CREGISTER:
begin
hr:=left.location.register;
emit_to_reg32(hr);
end;
else
begin
{ the set element isn't never samller than a byte }
{ and because it's a small set we need only 5 bits }
{ but 8 bits are easier to load }
getexplicitregister32(R_EDI);
emit_ref_reg(A_MOVZX,S_BL,
newreference(left.location.reference),R_EDI);
hr:=R_EDI;
del_reference(left.location.reference);
end;
end;
case right.location.loc of
LOC_REGISTER,
LOC_CREGISTER :
begin
emit_reg_reg(A_BT,S_L,hr,
right.location.register);
ungetregister32(right.location.register);
end
else
begin
del_reference(right.location.reference);
if right.location.reference.is_immediate then
begin
{ We have to load the value into a register because
btl does not accept values only refs or regs (PFV) }
hr2:=getregister32;
emit_const_reg(A_MOV,S_L,
right.location.reference.offset,hr2);
emit_reg_reg(A_BT,S_L,hr,hr2);
ungetregister32(hr2);
end
else
emit_reg_ref(A_BT,S_L,hr,
newreference(right.location.reference));
end;
end;
{ simply to indicate EDI is deallocated here too (JM) }
ungetregister32(hr);
location.loc:=LOC_FLAGS;
location.resflags:=F_C;
end;
end
else
begin
if right.location.reference.is_immediate then
begin
location.resflags:=F_C;
getlabel(l);
getlabel(l2);
{ Is this treated in firstpass ?? }
if left.nodetype=ordconstn then
begin
hr:=getregister32;
left.location.loc:=LOC_REGISTER;
left.location.register:=hr;
emit_const_reg(A_MOV,S_L,
tordconstnode(left).value,hr);
end;
case left.location.loc of
LOC_REGISTER,
LOC_CREGISTER:
begin
hr:=left.location.register;
emit_to_reg32(hr);
emit_const_reg(A_CMP,S_L,31,hr);
emitjmp(C_NA,l);
{ reset carry flag }
emit_none(A_CLC,S_NO);
emitjmp(C_NONE,l2);
emitlab(l);
{ We have to load the value into a register because
btl does not accept values only refs or regs (PFV) }
hr2:=getregister32;
emit_const_reg(A_MOV,S_L,right.location.reference.offset,hr2);
emit_reg_reg(A_BT,S_L,hr,hr2);
ungetregister32(hr2);
end;
else
begin
{$ifdef CORRECT_SET_IN_FPC}
if m_tp in aktmodeswitches then
begin
{***WARNING only correct if
reference is 32 bits (PM) *****}
emit_const_ref(A_CMP,S_L,
31,newreference(left.location.reference));
end
else
{$endif CORRECT_SET_IN_FPC}
begin
emit_const_ref(A_CMP,S_B,
31,newreference(left.location.reference));
end;
emitjmp(C_NA,l);
{ reset carry flag }
emit_none(A_CLC,S_NO);
emitjmp(C_NONE,l2);
emitlab(l);
del_reference(left.location.reference);
hr:=getregister32;
emit_ref_reg(A_MOV,S_L,
newreference(left.location.reference),hr);
{ We have to load the value into a register because
btl does not accept values only refs or regs (PFV) }
hr2:=getregister32;
emit_const_reg(A_MOV,S_L,
right.location.reference.offset,hr2);
emit_reg_reg(A_BT,S_L,hr,hr2);
ungetregister32(hr2);
end;
end;
emitlab(l2);
end { of right.location.reference.is_immediate }
{ do search in a normal set which could have >32 elementsm
but also used if the left side contains higher values > 32 }
else if left.nodetype=ordconstn then
begin
location.resflags:=F_NE;
inc(right.location.reference.offset,tordconstnode(left).value shr 3);
emit_const_ref(A_TEST,S_B,1 shl (tordconstnode(left).value and 7),
newreference(right.location.reference));
del_reference(right.location.reference);
end
else
begin
pushsetelement(left);
emitpushreferenceaddr(right.location.reference);
del_reference(right.location.reference);
{ registers need not be save. that happens in SET_IN_BYTE }
{ (EDI is changed) }
emitcall('FPC_SET_IN_BYTE');
{ ungetiftemp(right.location.reference); }
location.loc:=LOC_FLAGS;
location.resflags:=F_C;
end;
end;
end;
if (right.location.loc in [LOC_MEM,LOC_REFERENCE]) then
ungetiftemp(right.location.reference);
end;
{*****************************************************************************
TI386CASENODE
*****************************************************************************}
procedure ti386casenode.pass_2;
var
with_sign : boolean;
opsize : topsize;
jmp_gt,jmp_le,jmp_lee : tasmcond;
hp : tnode;
{ register with case expression }
hregister,hregister2 : tregister;
endlabel,elselabel : pasmlabel;
{ true, if we can omit the range check of the jump table }
jumptable_no_range : boolean;
{ where to put the jump table }
jumpsegment : paasmoutput;
min_label : TConstExprInt;
procedure gentreejmp(p : pcaserecord);
var
lesslabel,greaterlabel : pasmlabel;
begin
emitlab(p^._at);
{ calculate labels for left and right }
if (p^.less=nil) then
lesslabel:=elselabel
else
lesslabel:=p^.less^._at;
if (p^.greater=nil) then
greaterlabel:=elselabel
else
greaterlabel:=p^.greater^._at;
{ calculate labels for left and right }
{ no range label: }
if p^._low=p^._high then
begin
emit_const_reg(A_CMP,opsize,p^._low,hregister);
if greaterlabel=lesslabel then
emitjmp(C_NE,lesslabel)
else
begin
emitjmp(jmp_le,lesslabel);
emitjmp(jmp_gt,greaterlabel);
end;
emitjmp(C_None,p^.statement);
end
else
begin
emit_const_reg(A_CMP,opsize,p^._low,hregister);
emitjmp(jmp_le,lesslabel);
emit_const_reg(A_CMP,opsize,p^._high,hregister);
emitjmp(jmp_gt,greaterlabel);
emitjmp(C_None,p^.statement);
end;
if assigned(p^.less) then
gentreejmp(p^.less);
if assigned(p^.greater) then
gentreejmp(p^.greater);
end;
procedure genlinearcmplist(hp : pcaserecord);
var
first : boolean;
last : TConstExprInt;
procedure genitem(t : pcaserecord);
var
l1 : pasmlabel;
begin
if assigned(t^.less) then
genitem(t^.less);
if t^._low=t^._high then
begin
if opsize=S_Q then
begin
getlabel(l1);
emit_const_reg(A_CMP,S_L,longint(hi(int64(t^._low))),hregister2);
emitjmp(C_NZ,l1);
emit_const_reg(A_CMP,S_L,longint(lo(int64(t^._low))),hregister);
emitjmp(C_Z,t^.statement);
emitlab(l1);
end
else
begin
emit_const_reg(A_CMP,opsize,t^._low,hregister);
emitjmp(C_Z,t^.statement);
last:=t^._low;
end;
end
else
begin
{ if there is no unused label between the last and the }
{ present label then the lower limit can be checked }
{ immediately. else check the range in between: }
if first or (t^._low-last>1) then
begin
if opsize=S_Q then
begin
getlabel(l1);
emit_const_reg(A_CMP,S_L,longint(hi(int64(t^._low))),hregister2);
emitjmp(jmp_le,elselabel);
emitjmp(jmp_gt,l1);
emit_const_reg(A_CMP,S_L,longint(lo(int64(t^._low))),hregister);
{ the comparisation of the low dword must be always unsigned! }
emitjmp(C_B,elselabel);
emitlab(l1);
end
else
begin
emit_const_reg(A_CMP,opsize,t^._low,hregister);
emitjmp(jmp_le,elselabel);
end;
end;
if opsize=S_Q then
begin
getlabel(l1);
emit_const_reg(A_CMP,S_L,longint(hi(int64(t^._high))),hregister2);
emitjmp(jmp_le,t^.statement);
emitjmp(jmp_gt,l1);
emit_const_reg(A_CMP,S_L,longint(lo(int64(t^._high))),hregister);
{ the comparisation of the low dword must be always unsigned! }
emitjmp(C_BE,t^.statement);
emitlab(l1);
end
else
begin
emit_const_reg(A_CMP,opsize,t^._high,hregister);
emitjmp(jmp_lee,t^.statement);
end;
last:=t^._high;
end;
first:=false;
if assigned(t^.greater) then
genitem(t^.greater);
end;
begin
last:=0;
first:=true;
genitem(hp);
emitjmp(C_None,elselabel);
end;
procedure genlinearlist(hp : pcaserecord);
var
first : boolean;
last : TConstExprInt;
{helplabel : longint;}
procedure genitem(t : pcaserecord);
procedure gensub(value:longint);
begin
if value=1 then
emit_reg(A_DEC,opsize,hregister)
else
emit_const_reg(A_SUB,opsize,value,hregister);
end;
begin
if assigned(t^.less) then
genitem(t^.less);
{ need we to test the first value }
if first and (t^._low>get_min_value(left.resulttype)) then
begin
emit_const_reg(A_CMP,opsize,t^._low,hregister);
emitjmp(jmp_le,elselabel);
end;
if t^._low=t^._high then
begin
if t^._low-last=0 then
emit_reg_reg(A_OR,opsize,hregister,hregister)
else
gensub(t^._low-last);
last:=t^._low;
emitjmp(C_Z,t^.statement);
end
else
begin
{ it begins with the smallest label, if the value }
{ is even smaller then jump immediately to the }
{ ELSE-label }
if first then
begin
{ have we to ajust the first value ? }
if t^._low>get_min_value(left.resulttype) then
gensub(t^._low);
end
else
begin
{ if there is no unused label between the last and the }
{ present label then the lower limit can be checked }
{ immediately. else check the range in between: }
emit_const_reg(A_SUB,opsize,t^._low-last,hregister);
emitjmp(jmp_le,elselabel);
end;
emit_const_reg(A_SUB,opsize,t^._high-t^._low,hregister);
emitjmp(jmp_lee,t^.statement);
last:=t^._high;
end;
first:=false;
if assigned(t^.greater) then
genitem(t^.greater);
end;
begin
{ do we need to generate cmps? }
if (with_sign and (min_label<0)) then
genlinearcmplist(hp)
else
begin
last:=0;
first:=true;
genitem(hp);
emitjmp(C_None,elselabel);
end;
end;
procedure genjumptable(hp : pcaserecord;min_,max_ : longint);
var
table : pasmlabel;
last : TConstExprInt;
hr : preference;
procedure genitem(t : pcaserecord);
var
i : longint;
begin
if assigned(t^.less) then
genitem(t^.less);
{ fill possible hole }
for i:=last+1 to t^._low-1 do
jumpsegment^.concat(new(pai_const_symbol,init(elselabel)));
for i:=t^._low to t^._high do
jumpsegment^.concat(new(pai_const_symbol,init(t^.statement)));
last:=t^._high;
if assigned(t^.greater) then
genitem(t^.greater);
end;
begin
if not(jumptable_no_range) then
begin
emit_const_reg(A_CMP,opsize,min_,hregister);
{ case expr less than min_ => goto elselabel }
emitjmp(jmp_le,elselabel);
emit_const_reg(A_CMP,opsize,max_,hregister);
emitjmp(jmp_gt,elselabel);
end;
getlabel(table);
{ extend with sign }
if opsize=S_W then
begin
if with_sign then
emit_reg_reg(A_MOVSX,S_WL,hregister,
reg16toreg32(hregister))
else
emit_reg_reg(A_MOVZX,S_WL,hregister,
reg16toreg32(hregister));
hregister:=reg16toreg32(hregister);
end
else if opsize=S_B then
begin
if with_sign then
emit_reg_reg(A_MOVSX,S_BL,hregister,
reg8toreg32(hregister))
else
emit_reg_reg(A_MOVZX,S_BL,hregister,
reg8toreg32(hregister));
hregister:=reg8toreg32(hregister);
end;
new(hr);
reset_reference(hr^);
hr^.symbol:=table;
hr^.offset:=(-min_)*4;
hr^.index:=hregister;
hr^.scalefactor:=4;
emit_ref(A_JMP,S_NO,hr);
{ !!!!! generate tables
if not(cs_littlesize in aktlocalswitches) then
jumpsegment^.concat(new(paicpu,op_const(A_ALIGN,S_NO,4)));
}
jumpsegment^.concat(new(pai_label,init(table)));
last:=min_;
genitem(hp);
{ !!!!!!!
if not(cs_littlesize in aktlocalswitches) then
emit_const(A_ALIGN,S_NO,4);
}
end;
var
lv,hv,max_label,labels : longint;
max_linear_list : longint;
otl, ofl: pasmlabel;
{$ifdef Delphi}
dist : cardinal;
{$else Delphi}
dist : dword;
{$endif Delphi}
hr : preference;
begin
getlabel(endlabel);
getlabel(elselabel);
if (cs_create_smart in aktmoduleswitches) then
jumpsegment:=procinfo^.aktlocaldata
else
jumpsegment:=datasegment;
with_sign:=is_signed(left.resulttype);
if with_sign then
begin
jmp_gt:=C_G;
jmp_le:=C_L;
jmp_lee:=C_LE;
end
else
begin
jmp_gt:=C_A;
jmp_le:=C_B;
jmp_lee:=C_BE;
end;
cleartempgen;
{ save current truelabel and falselabel (they are restored in }
{ locjump2reg) (JM) }
if left.location.loc=LOC_JUMP then
begin
otl:=truelabel;
getlabel(truelabel);
ofl:=falselabel;
getlabel(falselabel);
end;
secondpass(left);
{ determines the size of the operand }
opsize:=bytes2Sxx[left.resulttype^.size];
{ copy the case expression to a register }
case left.location.loc of
LOC_REGISTER:
begin
if opsize=S_Q then
begin
hregister:=left.location.registerlow;
hregister2:=left.location.registerhigh;
end
else
hregister:=left.location.register;
end;
LOC_FLAGS :
begin
locflags2reg(left.location,opsize);
hregister := left.location.register;
end;
LOC_JUMP:
begin
locjump2reg(left.location,opsize,otl,ofl);
hregister := left.location.register;
end;
LOC_CREGISTER:
begin
hregister:=getregister32;
case opsize of
S_B:
hregister:=reg32toreg8(hregister);
S_W:
hregister:=reg32toreg16(hregister);
S_Q:
hregister2:=R_EDI;
end;
if opsize=S_Q then
begin
emit_reg_reg(A_MOV,S_L,left.location.registerlow,hregister);
hr:=newreference(left.location.reference);
inc(hr^.offset,4);
emit_reg_reg(A_MOV,S_L,left.location.registerhigh,hregister2);
end
else
emit_reg_reg(A_MOV,opsize,
left.location.register,hregister);
end;
LOC_MEM,LOC_REFERENCE:
begin
del_reference(left.location.reference);
hregister:=getregister32;
case opsize of
S_B:
hregister:=reg32toreg8(hregister);
S_W:
hregister:=reg32toreg16(hregister);
S_Q:
hregister2:=R_EDI;
end;
if opsize=S_Q then
begin
emit_ref_reg(A_MOV,S_L,newreference(
left.location.reference),hregister);
hr:=newreference(left.location.reference);
inc(hr^.offset,4);
emit_ref_reg(A_MOV,S_L,hr,hregister2);
end
else
emit_ref_reg(A_MOV,opsize,newreference(
left.location.reference),hregister);
end;
else internalerror(2002);
end;
{ we need the min_label always to choose between }
{ cmps and subs/decs }
min_label:=case_get_min(nodes);
{ now generate the jumps }
if opsize=S_Q then
genlinearcmplist(nodes)
else
begin
if cs_optimize in aktglobalswitches then
begin
{ procedures are empirically passed on }
{ consumption can also be calculated }
{ but does it pay on the different }
{ processors? }
{ moreover can the size only be appro- }
{ ximated as it is not known if rel8, }
{ rel16 or rel32 jumps are used }
max_label:=case_get_max(nodes);
labels:=case_count_labels(nodes);
{ can we omit the range check of the jump table ? }
getrange(left.resulttype,lv,hv);
jumptable_no_range:=(lv=min_label) and (hv=max_label);
{ hack a little bit, because the range can be greater }
{ than the positive range of a longint }
if (min_label<0) and (max_label>0) then
begin
{$ifdef Delphi}
if min_label=longint($80000000) then
dist:=Cardinal(max_label)+Cardinal($80000000)
else
dist:=Cardinal(max_label)+Cardinal(-min_label)
{$else Delphi}
if min_label=$80000000 then
dist:=dword(max_label)+dword($80000000)
else
dist:=dword(max_label)+dword(-min_label)
{$endif Delphi}
end
else
dist:=max_label-min_label;
{ optimize for size ? }
if cs_littlesize in aktglobalswitches then
begin
if (labels<=2) or
((max_label-min_label)<0) or
((max_label-min_label)>3*labels) then
{ a linear list is always smaller than a jump tree }
genlinearlist(nodes)
else
{ if the labels less or more a continuum then }
genjumptable(nodes,min_label,max_label);
end
else
begin
if jumptable_no_range then
max_linear_list:=4
else
max_linear_list:=2;
{ a jump table crashes the pipeline! }
if aktoptprocessor=Class386 then
inc(max_linear_list,3);
if aktoptprocessor=ClassP5 then
inc(max_linear_list,6);
if aktoptprocessor>=ClassP6 then
inc(max_linear_list,9);
if (labels<=max_linear_list) then
genlinearlist(nodes)
else
begin
if (dist>4*labels) then
begin
if labels>16 then
gentreejmp(nodes)
else
genlinearlist(nodes);
end
else
genjumptable(nodes,min_label,max_label);
end;
end;
end
else
{ it's always not bad }
genlinearlist(nodes);
end;
ungetregister(hregister);
{ now generate the instructions }
hp:=right;
while assigned(hp) do
begin
cleartempgen;
secondpass(tbinarynode(hp).right);
{ don't come back to case line }
aktfilepos:=exprasmlist^.getlasttaifilepos^;
emitjmp(C_None,endlabel);
hp:=tbinarynode(hp).left;
end;
emitlab(elselabel);
{ ...and the else block }
if assigned(elseblock) then
begin
cleartempgen;
secondpass(elseblock);
end;
emitlab(endlabel);
end;
begin
csetelementnode:=ti386setelementnode;
cinnode:=ti386innode;
ccasenode:=ti386casenode;
end.
{
$Log$
Revision 1.4 2000-11-13 14:44:36 jonas
* fixes so no more range errors with improved range checking code
Revision 1.3 2000/10/31 22:02:57 peter
* symtable splitted, no real code changes
Revision 1.2 2000/10/26 15:53:27 jonas
* fixed web bug1192 (changed an ungetregister32 to ungetregister)
("merged" from fixes)
Revision 1.1 2000/10/15 09:33:32 peter
* moved n386*.pas to i386/ cpu_target dir
Revision 1.4 2000/10/14 10:14:49 peter
* moehrendorf oct 2000 rewrite
Revision 1.3 2000/09/30 16:08:45 peter
* more cg11 updates
Revision 1.2 2000/09/24 20:17:44 florian
* more conversion work done
Revision 1.1 2000/09/24 19:38:39 florian
* initial implementation
}