paweld/fpc
1
0
Fork 0
mirror of https://gitlab.com/freepascal.org/fpc/source.git synced 2025-04-17 17:39:27 +02:00
Code Issues Packages Projects Releases Wiki Activity
5346e509fe
fpc/install/doc/faq.txt
Tomas Hajny 5346e509fe + OS/2 install.exe & TZ variable
2002-07-07 20:09:47 +00:00

625 lines
35 KiB
Plaintext
Raw Blame History

1. [1]What is Free Pascal (FPC)?
2. [2]Which versions exist, and which one should I use?
3. [3]Free Pascal and GNU Pascal - a comparison
4. [4]Where can I get the compiler ?
5. [5]What are the considerations in porting
6. [6]I tried to compile my Delphi code with the Free Pascal
7. [7]I have to write a program for homework. Can you help?
8. [8]How can I build a unit?
9. [9]Will Free Pascal support TV (Turbo Vision) in the future?
10. [10]How can I compile the system unit?
11. [11]I get an internal error 9999 or 10?
12. [12]How does function overloading work?
13. [13]How can I call C functions?
14. [14]How can I use the graph unit with Free Pascal?
15. [15]Why do I get wrong colors when using the graph unit?
16. [16]Integrated Assembler syntax
17. [17]How can I access DOS memory / How can I do graphics
programming?
18. [18]How can I run Free Pascal without a math coprocessor?
19. [19]How do I reserve more than 2 megabytes of RAM?
20. [20]How can I access I/O ports?
21. [21]I'm using the Dos compiler under Windows 95
22. [22]I'm using OS/2
23. [23]INSTALL.EXE of Dos version 0.99.10 reports "Load error: no
DPMI"
24. [24]INSTALL.EXE of version 1.0 for Dos returns an error (-2) in
Windows NT 4.0
25. [25]INSTALL.EXE of version 1.0.6 or below returns an unknown error (-1)
under OS/2
or
[25]INSTALL.EXE of version 1.0.6 or above complains about missing
TZ variable under OS/2
26. [26]I want a new version NOW
27. [27]Where can I find a text mode IDE?
28. [28]How do I configure the Dos IDE?
29. [29]Why are the generated binaries so big?
30. [30]Unit system, syslinux, sysos2 or syswin32 not found errors
31. [31]Known bugs
32. [32]How can I find where an error occurred using the addresses a
crashed program prints?
1. What is Free Pascal (FPC)?
Originally named FPK-Pascal, the Free Pascal compiler is a 32 bit
Turbo Pascal compatible Pascal compiler for DOS, Linux, Win32,
OS/2 and (based on an older version) the AmigaOS. More operating
systems (BeOS and FreeBSD/ELF are in advanced stages of
development) are in the works.
The compiler is written in Pascal and is able to compile its own
sources. The source files are included.
Free Pascal is modest regarding its minimal system requirements
(386-25 Mhz for the Intel version and ideally a 68020 processor
for the Motorola version). At least 2 megabytes of RAM are
required. To remake the compiler more than 16MB is recommended.
Short history:
+ 6/1993: project start
+ 10/1993: first little programs work
+ 3/1995: the compiler compiles the own sources
+ 3/1996: released to the internet
+ 7/2000: 1.0 version
2. Which versions exist, and which one should I use?
FPC's version numbering changed a few times over the years.
Versions before 0.99.5 are considered archaic. After the release
of 0.99.5 a system in version numbering was introduced, and that
system was changed slightly changed after the 1.0 release.
Versioning for versions 0.99.5 - 1.0
Compilers with an even last number are release versions(e.g.
0.99.8, 0.99.10, 0.99.12, 0.99.14 1.0.0)
Compilers and packages with an odd last number are development
versions (e.g. 0.99.9, 0.99.11, 0.99.13, 0.99.15)
0.99.5 is an exception to this rule, since 0.99.5 IS a release (a
release prior to the introduction of this odd/even system).
Letters behind the version number (0.99.12b, 0.99.5d) indicate
release versions with some bugs and problems in the original
release (respectively 0.99.12 and 0.99.5) fixed.
Versioning after 1.0
Together with the release of 1.0 the version numbering has been
slightly changed, and a system in versioning resembling the Linux
kernel's has been introduced. The main difference is that the
difference between a release version is now in the second number
(1.0.x vs 1.1.x) instead of the third number (0.99.14 vs 0.99.15),
and the third number now becomes the patch level, replacing the
postfixed letter in the old system.
+ Releases that only fix bugs in version 1.0 will be numbered
1.0.x
+ New development (the so called snapshots) have version number
1.1.x. The meaning of the third version number x in the new
development branch is not defined yet, it could be used for
test releases or to signal major changes.
+ Eventually the 1.1.x versions, when stabilized will be
released as version 1.2. Fixes on the 1.2 release will be
numbered 1.2.x
+ The new development after the 1.2 release will be numbered
1.3.x and so on
+ When really big changes are implemented, the version will be
updated in the major number. This could be case with e.g. a
codegenerator rewrite with support for other processors
Normally you would want to use a release. Releases are considered
stable, and easier to support (the bugs, quirks and unintended
"features" are well known after a period of time, and workarounds
exist).
Development snapshots (which are generated daily) reflect the
current status of the compiler. Development versions probably have
new features and larger bugs fixed since the last release, but
might have some temporary stability drawbacks (which are usually
fixed by the next day).
Most support for development snapshots are basically the advise to
upgrade to newer snapshot in which the bugs are hopefully fixed.
Since version 0.99.8 the stability of the compiler steadily
increased and development snapshots are often quite useful for
certain categories of users. Ask in the maillists if it is worth
the trouble in your case if you're not sure.
The current release version is 1.00 for the OS/2, Linux, Windows
and Dos (Go32V2) targets and 0.99.5d for the 680x0 based systems
(Amiga and Atari ST). The development versions (snapshots) are
numbered 1.1.x at the moment
We advise all users to upgrade to the newest version for their
target. (1.0 for intel processors, and 0.99.5d for Motorola)
3. Free Pascal and GNU Pascal - a comparison
Aim:
Free Pascal tries to implement a Borland compatible
pascal compiler on as many platforms as possible. GNU
Pascal tries to implement a portable pascal compiler
based on POSIX.
Version:
Currently, Free Pascal is at version 1.00 for the Intel
version and version 0.99.5d for the Motorola/Intel
version. Version 0.99.5d differs from version 0.99.5 in
that all run time library fixes have been applied, as
well as all known code generation bugs. Version 1.00
differs from version 0.99.5d in that all parser bugfixes
have also been applied and also a lot of Delphi 2 and
Delphi 3 extensions have been implemented. GNU Pascal is
at version 2.8.1 (but this numbering is not really an
indication, it follows the GNU C numbering, since it is a
derivation of it)
Operating systems:
Free pascal runs on a limited number of systems : DOS,
Win32, Linux, OS/2 and AmigaOS and is for the moment
limited to the Intel and Motorola architectures. GNU
Pascal runs basically on any system that can run GNU C.
Sources:
Free Pascal is entirely written in Pascal (about 6 Mb of
source code), while GNU Pascal is written in C (it's an
adaptation of the GNU C compiler: 2.8 Mb code + 8 MB of
GNU C code)
Language:
Free Pascal supports the Borland Pascal dialect Borland,
and implements the Delphi Object Pascal language. GNU
Pascal supports ISO 7185, ISO 10206, (most of) Borland
Pascal 7.0
Extensions:
Free Pascal implements method, function and operator
overloading. GNU Pascal implements operator overloading.
License:
Both compilers come under the GNU GPL.
Author:
Free Pascal was started by Florian Klaempfl, Germany
(Florian.Klaempfl@gmx.de), GNU Pascal was started by
Jukka Virtanen, Finland (jtv@hut.fi).
4. Where can I get the compiler ?
Free Pascal is available for download from all [33]official
mirrors
5. What are the considerations in porting code to other processors?
Because the compiler now supports processors other than the Intel,
it is important to take a few precautions so that your code will
execute correctly on all processors.
+ Limit your use of asm statements unless it is time critical
code
+ Don't use the packed directive unless you know exactly what
you are doing. Most processors require alignment of data, and
using packed on objects,classes and records may break this
requirement. If this is the case your code will simply crash
on the target processors.
+ Clean up at the end of your program, i.e. close all files on
exit, as some operating systems don't like it when some files
are left opened.
+ Try not to rely on the endian of the specific machines when
doing arithmetic operations. Furthermore, reading and writing
of binary data to/from files will probably require byte swaps
across different endian machines (swap is your friend in this
case). This is even more important if you write binary data
to files.
+ Try limiting your local variables in subroutines to 32K, as
this is the limit of some processors, use dynamic allocation
instead.
+ Try limiting the size of parameters passed to subroutines to
32K, as this is the limit of some processors, use const or
var parameters instead.
6. I tried to compile my Delphi code with the Free Pascal Compiler,
but it seems that it doesn't recognize Delphi style OOP.
The compiler supports the Delphi OOP. Make sure you use the -S2 or
-Sd switches (see the manuals for the meaning of these switches).
For a list of Delphi incompabilities also check the manual.
7. I have to write a program for homework. Can you help?
No. Please, don't send us mail about homework, we are no teachers.
The Free Pascal development team tries to give good support for
the Free Pascal compiler and are trying to always reply to emails.
If we get emails like this, this becomes harder and harder.
8. How can I build a unit?
It works like in Turbo Pascal. The first keyword in the file must
be UNIT (not case sensitive). The compiler will generate two
files: XXX.PPU and XXX.O. The PPU file contains the interface
information for the compiler and the O-file the machine code (an
object file, whose precise structure depends on the assembler you
used). To use this unit in another unit or program, you must
include its name in the USES clause of your program.
9. Will Free Pascal support TV (Turbo Vision) in the future?
A Turbo Vision port, called Free Vision, has progressed nicely
lately. It's already very usable, we are even writing an IDE in
it. Due to copyrights problem the FreeVision source code is not
available at the moment. You can download the IDE from the
[34]development page. and get an idea of the look and feel though.
10. How can I compile the system unit?
To recompile the system unit, it is recommended to have GNU make
installed. typing 'make' in the rtl source directory will then
recompile all RTL units including the system unit. You may choose
to descend into the directory of your OS (e.g. rtl/go32v2) and do
a 'make' there.
It is possible to do all this manually, but you need more detailed
knowledge of the RTL tree structure for that.
11. I get an internal error 9999 or 10?
The latest versions of the Free Pascal Compiler come with an error
handling routine which catches the segmentation fault and lets the
compiler to exit gracefully. This is reported as an internal error
9999. Please try to reproduce the error and send [35]us a bug
report.
(For the curious, IE 9999 is not a specific bug. It is a safety
measure which terminates if during compiling a certain condition
is not met, which can be caused by several bugs. So if you report
the bug, and get IE 9999 later in a different piece or part of
sourcecode, it could be a completely different bug. IE 10 is
something similar. It is a safety measure that is triggered when
the estimated number of registers needed to evaluate an expression
proves wrong. Just like IE 9999, two IE 10 problems are often
independant of eachother.)
12. How does function overloading work?
function overloading is implemented, like in C++:
procedure a(i : integer);
begin
end;
procedure a(s : string);
begin
end;
begin
a('asdfdasf');
a(1234);
end.
You must be careful. If one of your overloaded functions is in the
interface part of your unit, then all overloaded functions must be
in the interface part. If you leave one out, the compiler will
complain with a 'This overloaded function can't be local' message.
Overloaded functions must differ in their parameters, it's not
enough if their return types are different.
13. How can I call C functions?
C calling convention is implemented as follows: The compiler
pushes the parameters from right to left, but the procedure has to
clear the stack. For calling the C function strcmp declare the
following:
function strcmp(s1 : pchar;s2 : pchar) : integer;cdecl;external;
Since 0.99.5, the older [C]; won't work!
14. How can I use the graph unit with Free Pascal?
Since 0.99.12, the graph unit is available both for Dos and Linux.
Under Dos, it only supported VESA modes though. Since version
0.99.14, a new more system independant graph unit is included
(although the only extra supported OS is Win32 and this is only
rudimentary support) which also supports standard VGA.
Since version 1.0, we also have a completely platform independent
way of selecting resolutions and bitdepths. You are strongly
encouraged to use it, because other ways will probably fail on one
or other platform. See the documentation of the graph unit for
more information.
15. Why do I get wrong colors when using the graph unit?
If you use detect as graphdriver, you will end up with the highest
supported bitdepth. Since the graph unit currently only supports
up to 16 bits per pixel modes and since this bitdepth is supported
by all graphics cards made in at least the last 5 years, you will
most likely get a 16 bit mode.
The main problem is that in 16 (and 15, 24, 32, ...) bit modes,
the colors aren't set anymore using an index in a palette (the
palettized way is called "indexed color"). In these modes, the
color number itself determines what color you get on screen and
you can't change this color. The color is encoded as follows (for
most graphics cards on PC's at least):
+ 15 bit color: lower 5 bits are blue intensity, next come 5
bits of green and then 5 bits of red. The highest bit of the
word is ignored.
+ 16 bit color: lower 5 bits are blue intensite, next come *6*
bits of green and then 5 bits of red.
This means that either you have to rewrite your program so it can
work with this so-called "direct color" scheme, or that you have
to use D8BIT as graphdriver and DetectMode as graphmode. This will
ensure that you end up with a 256 (indexed) color mode. If there
are no 256 color modes supported, then graphresult will contain
the value GrNotDetected after you called InitGraph and you can
retry with graphdriver D4BIT. Make sure you use the constant names
(D8BIT, D4BIT, ...) and not their actual numeric values, because
those values can change with the next release! That the very
reason why such symbolic constants exist.
16. Integrated Assembler syntax
The default assembler syntax (AT&T style) is different from the
one in Borland Pascal (Intel style).
However, as of version 0.99.0, the compiler supports Intel style
assembly syntax. See the documentation for more info on how to use
different assembler styles.
A description of the AT&T syntax can be found in the DJGPP FAQ
[36]http://www.delorie.com/djgpp/v2faq/faq102.html#Syntax or in
Brennan's Guide to Inline Assembly
[37]http://www.rt66.com/%7Ebrennan/djgpp/djgpp asm.html. The
documentation also contains a chapter where the difference between
the Intel and AT&T style assembly is explained.
Or you can use the convertor program at
[38]http://rcs.urz.tu-dresden.de/schoenfu/zip/asmtrans.zip .
17. How can I access DOS memory / How can I do graphics programming?
You can do like in TP, via absolute or mem[]. For larger memory
blocks use the dosmemput/dosmemget routines in Go32 unit.
18. How can I run Free Pascal without a math coprocessor?
On the Intel version the emulator is automatically loaded by the
compiler if you add the following commands to your autoexec.bat:
SET 387=N
SET EMU386=C:\PP\BIN\GO32V2\WEMU387.DXE
(don't forget to replace the C:\PP with the directory where you
installed FPC)
19. How do I reserve more than 2 megabytes of RAM?
By default Free Pascal allocates only 2MB of RAM for your
application. If it just allocated all it could get, people running
Windows would have problems as Windows would increase the swap
file size to give the program more memory on and on, until the
swap file drive would be full.
You can specify the size of the heap with -Chxxxx. The default
value is -Ch4000000. Try -Ch10000000, provided you got enough swap
space.
However, the heap size doesn't really matter anymore, since the
Heap is able to grow: if you've used all the available heap space,
the program will try to get more memory from the OS, so the heap
is limited to the maximum amount of free memory provided by the
OS.
It is only handy if you know you will need at least a certain
amount of memory. You can then specify this value using the -Ch
parameter, so your program will allocate it at once on startup.
This is slightly faster than growing the heap a number of times.
20. How can I access I/O ports?
With versions before 0.99.10: if you're under DOS you can use the
outport* and inport* procedures of the go32 unit.
Since version 0.99.8, the Port array is supported like in TP, as
long as you use the ports unit in your program (not available
under Win32).
I/O port access is possible under Linux, but that requires root
privileges. Check the manuals for the IOPerm, ReadPort and
WritePort procedures. (Unit Linux)
21. I'm using the Dos compiler under Windows 95
There is a problem with the Dos compiler and Win 95 on computers
with less than 16 MB. First set in the properties of the DOS box
the DPMI memory size to max value. Now try to start a demo program
in the DOS box, e.g. HELLO (starting takes some time). If this
works you will be able to get the compiler to work by recompiling
it with a smaller heap size, perhaps 2 or 4 MB (option -Chxxxx).
22. I'm using OS/2
Problems have been reported that the GO32v2 compiler does not run
on some OS/2 installations. You can use the native OS/2 compiler
(strongly preferred solution) or maybe compile a GO32v1 compiler
yourself. However, the GO32v2 version should generally work under
OS/2 as well.
23. INSTALL.EXE of Dos version 0.99.10 reports "Load error: no DPMI"
The file cwsdpmi.exe is missing in the main directory of the zip
archive. The above message pops up if no other DPMI services are
available. Such services are for example available in a Dos window
of Windows. You can either extract that file from basego32.zip or
download it from
[39]http://www.brain.uni-freiburg.de/%7Eklaus/cwsdpmi.exe. Put it
into the same directory as install.exe and run install again.
24. INSTALL.EXE of version 1.0 for Dos returns an error (-2) in
Windows NT 4.0
This is caused by long file names in some of the .ZIPs of the
dosversion. A new installer will be generated that ignores the
packages with long file names in it. Currently it is still being
tested. Alternatively, one could use the installer from the Win32
1.0 version under NT. This has the additional benefit that the
archives with long filenames can be selected and installed too.
The exact cause of this problem is that a NT 4.0 dosbox doesn't
support long file names for dos programs. Windows 95,98 and 2000
don't exhibit this problem.
+ The current ZIPs on ftp have been updated with the new
installer.
+ Dosw32100.zip, has now default the win32 installer, and the
go32v2 installer packaged as installd.exe.
+ If you already downloaded one of the large Dos zips, repeated
downloading is not necessary, just download a new installer:
o [40]Plain dos installer. For dos without a 32-bit
windows loaded or OS/2
o [41]Win32 installer, for all win32 targets (win 95,98,NT
en 2000) including their dosboxes
+ If you downloaded an OS/2 version, and experience problems,
you can try to download the new dos installer
25. INSTALL.EXE of version 1.0.6 or below fails with an unknown
error (-1) under OS/2
or
INSTALL.EXE of version 1.0.6 or above complains about missing
TZ variable under OS/2
You are most probably using an older version of OS/2 (like
OS/2 Warp 3.0) and don't have TZ variable in your environment.
The easiest solution is to add "SET TZ=..."
(e.g. "SET TZ=CET-1CEST,3,-1,0,7200,10,-1,0,10800,3600" for most
of western and central Europe) line to your CONFIG.SYS, and restart
OS/2. The proper setting for you can be found e.g. using the TZCALC
tool from [51]TIME868 package.
26. I want a new version NOW
In the time between the release of new official versions, you can
have a look at and test developer versions (so-called
"snapshots"). Be warned though: this is work under progress, so in
addition to old bugs fixed and new features added, this may also
contain new bugs.
Snapshots are generated automatically each night from the current
source at that moment. Sometimes this may fail due to bigger
changes not yet fully implemented. If your version doesn't work,
try again one or two days later. You're advised not to download
the GO32v1 version for Dos, since it's not supported any more.
The latest snapshot can always be downloaded from the
[42]development web page.
To install a snapshot, extract the zip archive into the existing
program directory of the last official version of Free Pascal
(after making a backup of the original of course). You can also
extract it into an empty directory and then move the files to the
program directory, overwriting existing files. Make sure that you
extract the ZIP archive such that the included directory structure
remains intact. For example if you use PKUNZIP, use "pkunzip -d"
instead of just "pkunzip". Note that snpashots also contain a new
RTL which most likely can't be used with the previous release
version, so backup your old RTL as well.
27. Where can I find a text mode IDE?
The development of the IDE (integrated development environment) is
not yet finished. However a working test version of the IDE is
available as snapshot. It requires the latest compiler snapshot be
installed on top of the current official version for your
particular platform (1.00 for GO32v2 or Win32). So if you have not
already done that, first install the latest official version (e.g.
file dos100.zip or dos100full.zip, you find these in the
[43]download section).
Then get and extract the latest snapshot for your platform (e.g.
snapshot.zip) into the directory containing the official version.
Next, do the same with one of the IDE snapshots. For more details
on where to find and how to install a snapshot, please see the
previous FAQ item. For additional instructions for required IDE
configuration please also read the next FAQ item.
28. How do I configure the Dos IDE?
Once you have installed the IDE (see the previous FAQ item), it
requires two configuration changes before it can compile. This is
due to the fact that the IDE includes its own compiler; it does
not use ppc386.exe and thus it also does not use the configuration
in the file ppc386.cfg.
Start fp.exe, select Target from the Compile menu and then check
GO32v2. Next, choose Directories in the Otions menu and in the
line "Unit directories" enter the path to your copy of the rtl
directory, usually c:\pp\rtl\go32v2. If you have done everything
correct and it still doesn't work, you may have grabbed a snapshot
that has a bug; in this case try again one or two days later or
ask for help on one of the [44]mailing lists.
29. Why are the generated binaries so big?
There are several reasons and remedies for this:
1. If you are using 0.99.12: Due to some problems with the
binary writer, 0.99.12 wasn't released with smartlinkable
RTLs. Smartlinking causes only actually used procedures,
functions and constants to be linked in.
You can remedy this by using a development version and
creating a smartlinking RTL. See the [45]make cycle faq or
use a later release if available (0.99.14 and later do
include a smartlinkable RTL). To turn on the generation of
smartlinkable units, use the -Cx command line option when
compiling your units. To turn on the linking of previously
generated smarlinkable units, use the -XX (-XS in 0.99.12 and
earlier) command line option when compiling a program.
2. Normally, all symbol information is included in the resulting
program (for easier debugging). You can remove this by using
the -Xs command line option when compiling your program (it
won't do anything when compiling units)
3. You can use UPX to pack the .EXEs (just like e.g. pklite) for
Dos (GO32v2) and Windows targets. Look [46]here for more
info.
4. You can use LXLITE for packing EMX binaries, but you won't be
able to run them under DOS (with extender) any more then. It
might even not be possible to use them on lower OS/2 versions
(like 2.x) depending on chosen type of compression. LXLITE
can be found e.g. on [47]Hobbes, search for LXLITE.
5. Turn on optimalisations, both for supplied packages (RTL,
API, FV, FCL) and for your own code, this will also decrease
the code size.
30. Unit system, syslinux, sysos2 or syswin32 not found errors
System (syslinux, sysos2 or syswin32, depending on platform) is
Pascal's base unit which is implicitely used in all programs. This
unit defines several standard procedures and structures, and must
be found to be able to compile any pascal program by FPC.
The location of the system.ppu and syslinux.o files are determined
by the -Fu switch which can be specified commandline, but is
usually in the ppc386.cfg configuration file.
If the compiler can't find this unit there are three possible
causes:
1. The ppc386.cfg isn't in the same path as the compiler
executable (go32v2, win32 and OS/2) or can't be found as
"/etc/ppc386.cfg" or ".ppc386.cfg" in your homedirectory
(Linux).
2. The ppc386.cfg doesn't contain the -Fu line, or a wrong one.
See the [48]make cycle faq, especially the chapters about the
ppc386.cfg and the directory structure.
3. The files ARE found but the wrong version or platform.
Correct ppc386.cfg to point to the right versions or
reinstall the right versions (this can happen if you try to
use a [49]snapshot compiler while the -Fu statemnt in the
used ppc386.cfg still points to the RTL that came with the
official release compiler).
A handy trick can be executing "ppc386 programname -vt", this
shows where the compiler is currently looking for the system
unit's files. You might want to pipe this through more (Dos, OS/2,
Windows) or less (Linux), since it can generate more than one
screen information:
Dos, OS/2, Windows:
ppc386 programname -vt |more
Linux:
ppc386 programname -vt |less
31. Known bugs
Go to the [50]bugs page
32. How can I find where an error occurred using the addresses a
crashed program prints?
1. Starting with version 1.00, the easiest possibility is to
recompile your program with -gl debugging option. This way
unit LineInfo is automatically linked in, and the printout
after a program crash then contains source line numbers in
addition to addresses. To see RTL functions in the backtrace
with their real name, you have to recompile the RTL with -gl
too.
2. For older versions, or more comprehensive checking, compile
the program with debugging information (use the -g command
line option)
3. Load the program in the debugger (gdb(w) for 0.99.12b and
earlier, gdbpas(w) for 0.99.14 and later) using
gdb(pas)(w) --directory=<src dirs> myprog.exe
Notes:
o Under Linux/Unix, don't add the ".exe" after myprog
o "src dirs" is a list of directories containing the
source code files of myprog and the units it uses
seperated by semi-colons (";"). The current directory is
automatically included.
4. Once inside the debugger, you can (optionally) set the
command line options that will be passed to your program
using the command "set args <option1 option2 ...>"
5. To start the program, type "run" and press enter
6. After the program has crashed, the address of the instruction
where the crash occurred will be shown. The debugger will try
to display the source code line corresponding with this
address. Note that this can be inside a procedure of the RTL,
so the source may not always be available and most likely the
RTL wasn't compiled with debugging information.
7. If you then type "bt" (BackTrace), the addreses in the call
stack will be shown (the addresses of the procedures which
were called before the program got to the current address).
You can see which source code lines these present using the
command
info line *<address>
For example:
info line *0x05bd8
References
1. http://www.freepascal.org/faq.htm#WhatIsFP
2. http://www.freepascal.org/faq.htm#versions
3. http://www.freepascal.org/faq.htm#FPandGNUPascal
4. http://www.freepascal.org/faq.htm#WhereToGetFP
5. http://www.freepascal.org/faq.htm#PortabilityTips
6. http://www.freepascal.org/faq.htm#OOP
7. http://www.freepascal.org/faq.htm#HOMEWORK
8. http://www.freepascal.org/faq.htm#HowcanIbuildaunit
9. http://www.freepascal.org/faq.htm#TurboVision
10. http://www.freepascal.org/faq.htm#CompileSystemUnit
11. http://www.freepascal.org/faq.htm#Internalerror9999
12. http://www.freepascal.org/faq.htm#Howdoesfunctionoverloadingwork
13. http://www.freepascal.org/faq.htm#HowToCallCFuncuntions
14. http://www.freepascal.org/faq.htm#HowToUseGraph
15. http://www.freepascal.org/faq.htm#WrongColors
16. http://www.freepascal.org/faq.htm#IntegratedAssemblerSyntax
17. http://www.freepascal.org/faq.htm#HowToAccessDosMemory
18. http://www.freepascal.org/faq.htm#FPwithoutfpu
19. http://www.freepascal.org/faq.htm#AccessingMoreThan4MB
20. http://www.freepascal.org/faq.htm#accessioports
21. http://www.freepascal.org/faq.htm#ImusingWin95
22. http://www.freepascal.org/faq.htm#ImusingOS2
23. http://www.freepascal.org/faq.htm#dpmi
24. http://www.freepascal.org/faq.htm#instal10NT
25. http://www.freepascal.org/faq.htm#instal106os2
26. http://www.freepascal.org/faq.htm#snapshot
27. http://www.freepascal.org/faq.htm#ideinst
28. http://www.freepascal.org/faq.htm#ideconfig
29. http://www.freepascal.org/faq.htm#binariesbig
30. http://www.freepascal.org/faq.htm#systemnotfound
31. http://www.freepascal.org/faq.htm#KnownBugs
32. http://www.freepascal.org/faq.htm#ErrorPos
33. http://www.freepascal.org/download.html
34. http://www.freepascal.org/develop.html#snapshot
35. http://www.freepascal.org/bugs.html
36. http://www.delorie.com/djgpp/v2faq/faq102.html#Syntax
37. http://www.rt66.com/%7Ebrennan/djgpp/djgpp%A0asm.html
38. http://rcs.urz.tu-dresden.de/schoenfu/zip/asmtrans.zip
39. http://www.brain.uni-freiburg.de/%7Eklaus/cwsdpmi.exe
40. ftp://ftp.freepascal.org/pub/fpc/dist/dos-1.00/separate/install.exe
41. ftp://ftp.freepascal.org/pub/fpc/dist/win32-1.00/separate/install.exe
42. http://www.freepascal.org/develop.html#snapshot
43. http://www.freepascal.org/download.html
44. http://www.freepascal.org/maillist.html
45. http://www.freepascal.org/makecyc.html
46. http://wildsau.idv.uni-linz.ac.at/mfx/upx.html
47. http://hobbes.nmsu.edu/
48. http://www.freepascal.org/makecyc.html
49. http://www.freepascal.org/faq.htm#snapshot
50. http://www.freepascal.org/bugs.html
51. http://hobbes.nmsu.edu/pub/os2/apps/internet/time/time868f.zip
Reference in New Issue View Git Blame Copy Permalink