fpc/compiler/mips/cpubase.pas
sergei 2944fc8839 * MIPS improvements:
* reworked condition codes, changed BC1T and BC1F from separate instructions to condition jumps.
  - removed A_P_SW, A_P_LW and A_SPARC8UNIMP
  + support '.set at' and '.set noat' directives
  + prepare to support bgtz,bgez,bltz,blez instructions.

git-svn-id: trunk@24631 -
2013-05-29 17:35:56 +00:00

379 lines
12 KiB
ObjectPascal

{
Copyright (c) 1998-2002 by Florian Klaempfl and Peter Vreman
Contains the base types for MIPS
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
****************************************************************************
}
{# Base unit for processor information. This unit contains
enumerations of registers, opcodes, sizes, and other
such things which are processor specific.
}
unit cpubase;
{$i fpcdefs.inc}
interface
uses
cutils,cclasses,
globtype,globals,
cpuinfo,
aasmbase,
cgbase
;
{*****************************************************************************
Assembler Opcodes
*****************************************************************************}
type
TAsmOp=({$i opcode.inc});
{ This should define the array of instructions as string }
op2strtable=array[tasmop] of string[11];
const
{ First value of opcode enumeration }
firstop = low(tasmop);
{ Last value of opcode enumeration }
lastop = high(tasmop);
{*****************************************************************************
Registers
*****************************************************************************}
type
{ Number of registers used for indexing in tables }
tregisterindex=0..{$i rmipsnor.inc}-1;
const
{ Available Superregisters }
{$i rmipssup.inc}
{ No Subregisters }
R_SUBWHOLE = R_SUBD;
{ Available Registers }
{$i rmipscon.inc}
{ Integer Super registers first and last }
first_int_supreg = RS_R0;
first_int_imreg = $20;
{ Float Super register first and last }
first_fpu_supreg = RS_F0;
first_fpu_imreg = $20;
{ MM Super register first and last }
first_mm_supreg = 0;
first_mm_imreg = 1;
{ TODO: Calculate bsstart}
regnumber_count_bsstart = 64;
regnumber_table : array[tregisterindex] of tregister = (
{$i rmipsnum.inc}
);
regstabs_table : array[tregisterindex] of shortint = (
{$i rmipssta.inc}
);
regdwarf_table : array[tregisterindex] of shortint = (
{$i rmipsdwf.inc}
);
{ registers which may be destroyed by calls }
VOLATILE_INTREGISTERS = [RS_R0..RS_R3,RS_R12..RS_R15];
VOLATILE_FPUREGISTERS = [RS_F0..RS_F3];
type
totherregisterset = set of tregisterindex;
{*****************************************************************************
Conditions
*****************************************************************************}
type
TAsmCond=(C_None,
C_EQ, C_NE, C_LT, C_LE, C_GT, C_GE, C_LTU, C_LEU, C_GTU, C_GEU,
C_LTZ, C_LEZ, C_GTZ, C_GEZ,
C_COP1TRUE,
C_COP1FALSE
);
const
cond2str : array[TAsmCond] of string[3]=('',
'eq','ne','lt','le','gt','ge','ltu','leu','gtu','geu',
'ltz','lez','gtz','gez',
'c1t','c1f'
);
{*****************************************************************************
Constants
*****************************************************************************}
const
max_operands = 4;
maxintregs = 31;
maxfpuregs = 8;
maxaddrregs = 0;
{*****************************************************************************
Constants
*****************************************************************************}
const
maxvarregs = 7;
varregs : Array [1..maxvarregs] of tsuperregister =
(RS_R4,RS_R5,RS_R6,RS_R7,RS_R8,RS_R9,RS_R10);
maxfpuvarregs = 4;
fpuvarregs : Array [1..maxfpuvarregs] of tsuperregister =
(RS_F4,RS_F5,RS_F6,RS_F7);
{*****************************************************************************
Default generic sizes
*****************************************************************************}
{ Defines the default address size for a processor, }
OS_ADDR = OS_32;
{# the natural int size for a processor,
has to match osuinttype/ossinttype as initialized in psystem }
OS_INT = OS_32;
OS_SINT = OS_S32;
{ the maximum float size for a processor, }
OS_FLOAT = OS_F64;
{ the size of a vector register for a processor }
OS_VECTOR = OS_M32;
{*****************************************************************************
Generic Register names
*****************************************************************************}
{ PIC Code }
NR_GP = NR_R28;
NR_PIC_FUNC = NR_R25;
RS_GP = RS_R28;
RS_PIC_FUNC = RS_R25;
{ VMT code }
NR_VMT = NR_R24;
RS_VMT = RS_R24;
NR_SP = NR_R29;
NR_S8 = NR_R30;
NR_FP = NR_R30;
NR_RA = NR_R31;
RS_SP = RS_R29;
RS_S8 = RS_R30;
RS_FP = RS_R30;
RS_RA = RS_R31;
{# Stack pointer register }
NR_STACK_POINTER_REG = NR_SP;
RS_STACK_POINTER_REG = RS_SP;
{# Frame pointer register }
NR_FRAME_POINTER_REG = NR_FP;
RS_FRAME_POINTER_REG = RS_FP;
NR_RETURN_ADDRESS_REG = NR_R7;
{ the return_result_reg, is used inside the called function to store its return
value when that is a scalar value otherwise a pointer to the address of the
result is placed inside it }
{ Results are returned in this register (32-bit values) }
NR_FUNCTION_RETURN_REG = NR_R2;
RS_FUNCTION_RETURN_REG = RS_R2;
{ Low part of 64bit return value }
NR_FUNCTION_RETURN64_LOW_REG = NR_R2;
RS_FUNCTION_RETURN64_LOW_REG = RS_R2;
{ High part of 64bit return value }
NR_FUNCTION_RETURN64_HIGH_REG = NR_R3;
RS_FUNCTION_RETURN64_HIGH_REG = RS_R3;
{ The value returned from a function is available in this register }
NR_FUNCTION_RESULT_REG = NR_R2;
RS_FUNCTION_RESULT_REG = RS_R2;
{ The lowh part of 64bit value returned from a function }
NR_FUNCTION_RESULT64_LOW_REG = NR_R2;
RS_FUNCTION_RESULT64_LOW_REG = RS_R2;
{ The high part of 64bit value returned from a function }
NR_FUNCTION_RESULT64_HIGH_REG = NR_R3;
RS_FUNCTION_RESULT64_HIGH_REG = RS_R3;
NR_FPU_RESULT_REG = NR_F0;
NR_MM_RESULT_REG = NR_NO;
{*****************************************************************************
GCC /ABI linking information
*****************************************************************************}
const
{ Registers which must be saved when calling a routine declared as
cppdecl, cdecl, stdcall, safecall, palmossyscall. The registers
saved should be the ones as defined in the target ABI and / or GCC.
This value can be deduced from the CALLED_USED_REGISTERS array in the
GCC source.
}
saved_standard_registers : array[0..0] of tsuperregister =
(RS_NO);
{ this is only for the generic code which is not used for this architecture }
saved_mm_registers : array[0..0] of tsuperregister = (RS_INVALID);
{ Required parameter alignment when calling a routine declared as
stdcall and cdecl. The alignment value should be the one defined
by GCC or the target ABI.
The value of this constant is equal to the constant
PARM_BOUNDARY / BITS_PER_UNIT in the GCC source.
}
std_param_align = 4;
{*****************************************************************************
CPU Dependent Constants
*****************************************************************************}
const
simm16lo = -32768;
simm16hi = 32767;
{*****************************************************************************
Helpers
*****************************************************************************}
function inverse_cond(const c: TAsmCond): TAsmCond; {$ifdef USEINLINE}inline;{$endif USEINLINE}
function conditions_equal(const c1, c2: TAsmCond): boolean; {$ifdef USEINLINE}inline;{$endif USEINLINE}
{ Returns the tcgsize corresponding with the size of reg.}
function reg_cgsize(const reg: tregister) : tcgsize;
function cgsize2subreg(regtype: tregistertype; s:tcgsize):tsubregister;
function is_calljmp(o:tasmop):boolean;
function findreg_by_number(r:Tregister):tregisterindex;
function std_regnum_search(const s:string):Tregister;
function std_regname(r:Tregister):string;
function dwarf_reg(r:tregister):shortint;
implementation
uses
rgBase,verbose;
const
std_regname_table : TRegNameTable = (
{$i rmipsstd.inc}
);
regnumber_index : array[tregisterindex] of tregisterindex = (
{$i rmipsrni.inc}
);
std_regname_index : array[tregisterindex] of tregisterindex = (
{$i rmipssri.inc}
);
function cgsize2subreg(regtype: tregistertype; s:tcgsize):tsubregister;
begin
if s in [OS_64,OS_S64] then
cgsize2subreg:=R_SUBQ
else
cgsize2subreg:=R_SUBWHOLE;
end;
function reg_cgsize(const reg: tregister): tcgsize;
begin
case getregtype(reg) of
R_INTREGISTER :
reg_cgsize:=OS_32;
R_FPUREGISTER :
begin
if getsubreg(reg)=R_SUBFD then
result:=OS_F64
else
result:=OS_F32;
end;
else
internalerror(200303181);
end;
end;
function is_calljmp(o:tasmop):boolean;
begin
is_calljmp:= o in [A_J,A_JAL,A_JALR,{ A_JALX, }A_JR, A_BA, A_BC];
end;
function inverse_cond(const c: TAsmCond): TAsmCond; {$ifdef USEINLINE}inline;{$endif USEINLINE}
const
inverse: array[TAsmCond] of TAsmCond=(C_None,
C_NE, C_EQ, C_GE, C_GT, C_LE, C_LT, C_GEU, C_GTU, C_LEU, C_LTU,
C_GEZ, C_GTZ, C_LEZ, C_LTZ,
C_COP1FALSE,
C_COP1TRUE
);
begin
result := inverse[c];
end;
function findreg_by_number(r:Tregister):tregisterindex;
begin
result:=rgBase.findreg_by_number_table(r,regnumber_index);
end;
function conditions_equal(const c1, c2: TAsmCond): boolean; {$ifdef USEINLINE}inline;{$endif USEINLINE}
begin
result := c1 = c2;
end;
function std_regnum_search(const s:string):Tregister;
begin
result:=regnumber_table[findreg_by_name_table(s,std_regname_table,std_regname_index)];
end;
function std_regname(r:Tregister):string;
var
p : tregisterindex;
begin
p:=findreg_by_number_table(r,regnumber_index);
if p<>0 then
result:=std_regname_table[p]
else
result:=generic_regname(r);
end;
function dwarf_reg(r:tregister):shortint;
begin
result:=regdwarf_table[findreg_by_number(r)];
if result=-1 then
internalerror(200603251);
end;
begin
end.