fpc/compiler/psub.pas
tom_at_work bfb2c916dc * fixed problem with too large offsets in conditional jumps (see also rev 1161 for the PowerPC code)
* updated sysnr.inc for PowerPC64 from 2.6.11 kernel sources
* fixed SigactionRec sa_flags field sizes, which improves signal handling for PowerPC64 platform

git-svn-id: trunk@1352 -
2005-10-10 23:45:57 +00:00

1477 lines
55 KiB
ObjectPascal

{
Copyright (c) 1998-2002 by Florian Klaempfl, Daniel Mantione
Does the parsing and codegeneration at subroutine level
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
****************************************************************************
}
unit psub;
{$i fpcdefs.inc}
interface
uses
cclasses,globals,
node,nbas,
symdef,procinfo;
type
tcgprocinfo = class(tprocinfo)
private
procedure add_entry_exit_code;
public
{ code for the subroutine as tree }
code : tnode;
{ positions in the tree for init/final }
entry_asmnode,
loadpara_asmnode,
exitlabel_asmnode,
stackcheck_asmnode,
init_asmnode,
final_asmnode : tasmnode;
{ list to store the procinfo's of the nested procedures }
nestedprocs : tlinkedlist;
constructor create(aparent:tprocinfo);override;
destructor destroy;override;
procedure printproc;
procedure generate_code;
procedure resetprocdef;
procedure add_to_symtablestack;
procedure remove_from_symtablestack;
procedure parse_body;
end;
procedure printnode_reset;
{ reads the declaration blocks }
procedure read_declarations(islibrary : boolean);
{ reads declarations in the interface part of a unit }
procedure read_interface_declarations;
implementation
uses
{ common }
cutils,
{ global }
globtype,tokens,verbose,comphook,
systems,
{ aasm }
cpubase,aasmbase,aasmtai,
{ symtable }
symconst,symbase,symsym,symtype,symtable,defutil,
paramgr,
ppu,fmodule,
{ pass 1 }
nutils,nld,ncal,ncon,nflw,nadd,ncnv,nmem,
pass_1,
{$ifdef state_tracking}
nstate,
{$endif state_tracking}
{ pass 2 }
{$ifndef NOPASS2}
pass_2,
{$endif}
{ parser }
scanner,import,gendef,
pbase,pstatmnt,pdecl,pdecsub,pexports,
{ codegen }
tgobj,cgobj,dbgbase,
ncgutil,regvars
{$if defined(arm) or defined(powerpc) or defined(powerpc64)}
,aasmcpu
{$endif arm}
{$ifndef NOOPT}
{$ifdef i386}
,aopt386
{$else i386}
,aopt
{$endif i386}
{$endif}
;
{****************************************************************************
PROCEDURE/FUNCTION BODY PARSING
****************************************************************************}
procedure initializevars(p:tnamedindexitem;arg:pointer);
var
b : tblocknode;
begin
if not (tsym(p).typ in [localvarsym,globalvarsym]) then
exit;
with tabstractnormalvarsym(p) do
begin
if assigned(defaultconstsym) then
begin
b:=tblocknode(arg);
b.left:=cstatementnode.create(
cassignmentnode.create(
cloadnode.create(tsym(p),tsym(p).owner),
cloadnode.create(defaultconstsym,defaultconstsym.owner)),
b.left);
end;
end;
end;
procedure check_finalize_paras(p : tnamedindexitem;arg:pointer);
begin
if (tsym(p).typ=paravarsym) and
(tparavarsym(p).varspez=vs_value) and
not is_class(tparavarsym(p).vartype.def) and
tparavarsym(p).vartype.def.needs_inittable then
include(current_procinfo.flags,pi_needs_implicit_finally);
end;
procedure check_finalize_locals(p : tnamedindexitem;arg:pointer);
begin
if (tsym(p).typ=localvarsym) and
(tlocalvarsym(p).refs>0) and
not(vo_is_funcret in tlocalvarsym(p).varoptions) and
not(is_class(tlocalvarsym(p).vartype.def)) and
tlocalvarsym(p).vartype.def.needs_inittable then
include(current_procinfo.flags,pi_needs_implicit_finally);
end;
function block(islibrary : boolean) : tnode;
begin
{ parse const,types and vars }
read_declarations(islibrary);
{ do we have an assembler block without the po_assembler?
we should allow this for Delphi compatibility (PFV) }
if (token=_ASM) and (m_delphi in aktmodeswitches) then
include(current_procinfo.procdef.procoptions,po_assembler);
{ Handle assembler block different }
if (po_assembler in current_procinfo.procdef.procoptions) then
begin
block:=assembler_block;
exit;
end;
{Unit initialization?.}
if (
assigned(current_procinfo.procdef.localst) and
(current_procinfo.procdef.localst.symtablelevel=main_program_level) and
(current_module.is_unit)
) or
islibrary then
begin
if (token=_END) then
begin
consume(_END);
{ We need at least a node, else the entry/exit code is not
generated and thus no PASCALMAIN symbol which we need (PFV) }
if islibrary then
block:=cnothingnode.create
else
block:=nil;
end
else
begin
if token=_INITIALIZATION then
begin
{ The library init code is already called and does not
need to be in the initfinal table (PFV) }
if not islibrary then
current_module.flags:=current_module.flags or uf_init;
block:=statement_block(_INITIALIZATION);
end
else if (token=_FINALIZATION) then
begin
if (current_module.flags and uf_finalize)<>0 then
block:=statement_block(_FINALIZATION)
else
begin
{ can we allow no INITIALIZATION for DLL ??
I think it should work PM }
block:=nil;
exit;
end;
end
else
begin
{ The library init code is already called and does not
need to be in the initfinal table (PFV) }
if not islibrary then
current_module.flags:=current_module.flags or uf_init;
block:=statement_block(_BEGIN);
end;
end;
end
else
begin
block:=statement_block(_BEGIN);
if symtablestack.symtabletype=localsymtable then
symtablestack.foreach_static(@initializevars,block);
end;
end;
{****************************************************************************
PROCEDURE/FUNCTION COMPILING
****************************************************************************}
procedure printnode_reset;
begin
assign(printnodefile,treelogfilename);
{$I-}
rewrite(printnodefile);
{$I+}
if ioresult<>0 then
begin
Comment(V_Error,'Error creating '+treelogfilename);
exit;
end;
close(printnodefile);
end;
function generate_bodyentry_block:tnode;
var
srsym : tsym;
para : tcallparanode;
newstatement : tstatementnode;
htype : ttype;
begin
result:=internalstatements(newstatement);
if assigned(current_procinfo.procdef._class) then
begin
{ a constructor needs a help procedure }
if (current_procinfo.procdef.proctypeoption=potype_constructor) then
begin
if is_class(current_procinfo.procdef._class) then
begin
include(current_procinfo.flags,pi_needs_implicit_finally);
srsym:=search_class_member(current_procinfo.procdef._class,'NEWINSTANCE');
if assigned(srsym) and
(srsym.typ=procsym) then
begin
{ if vmt>1 then newinstance }
addstatement(newstatement,cifnode.create(
caddnode.create(gtn,
ctypeconvnode.create_internal(
load_vmt_pointer_node,
voidpointertype),
cpointerconstnode.create(1,voidpointertype)),
cassignmentnode.create(
ctypeconvnode.create_internal(
load_self_pointer_node,
voidpointertype),
ccallnode.create(nil,tprocsym(srsym),srsym.owner,load_vmt_pointer_node,[])),
nil));
end
else
internalerror(200305108);
end
else
if is_object(current_procinfo.procdef._class) then
begin
htype.setdef(current_procinfo.procdef._class);
htype.setdef(tpointerdef.create(htype));
{ parameter 3 : vmt_offset }
{ parameter 2 : address of pointer to vmt,
this is required to allow setting the vmt to -1 to indicate
that memory was allocated }
{ parameter 1 : self pointer }
para:=ccallparanode.create(
cordconstnode.create(current_procinfo.procdef._class.vmt_offset,s32inttype,false),
ccallparanode.create(
ctypeconvnode.create_internal(
load_vmt_pointer_node,
voidpointertype),
ccallparanode.create(
ctypeconvnode.create_internal(
load_self_pointer_node,
voidpointertype),
nil)));
addstatement(newstatement,cassignmentnode.create(
ctypeconvnode.create_internal(
load_self_pointer_node,
voidpointertype),
ccallnode.createintern('fpc_help_constructor',para)));
end
else
internalerror(200305103);
{ if self=nil then exit
calling fail instead of exit is useless because
there is nothing to dispose (PFV) }
addstatement(newstatement,cifnode.create(
caddnode.create(equaln,
load_self_pointer_node,
cnilnode.create),
cexitnode.create(nil),
nil));
end;
{ maybe call BeforeDestruction for classes }
if (current_procinfo.procdef.proctypeoption=potype_destructor) and
is_class(current_procinfo.procdef._class) then
begin
srsym:=search_class_member(current_procinfo.procdef._class,'BEFOREDESTRUCTION');
if assigned(srsym) and
(srsym.typ=procsym) then
begin
{ if vmt<>0 then beforedestruction }
addstatement(newstatement,cifnode.create(
caddnode.create(unequaln,
load_vmt_pointer_node,
cnilnode.create),
ccallnode.create(nil,tprocsym(srsym),srsym.owner,load_self_node,[]),
nil));
end
else
internalerror(200305104);
end;
end;
end;
function generate_bodyexit_block:tnode;
var
srsym : tsym;
para : tcallparanode;
newstatement : tstatementnode;
begin
result:=internalstatements(newstatement);
if assigned(current_procinfo.procdef._class) then
begin
{ maybe call AfterConstruction for classes }
if (current_procinfo.procdef.proctypeoption=potype_constructor) and
is_class(current_procinfo.procdef._class) then
begin
srsym:=search_class_member(current_procinfo.procdef._class,'AFTERCONSTRUCTION');
if assigned(srsym) and
(srsym.typ=procsym) then
begin
{ Self can be nil when fail is called }
{ if self<>nil and vmt<>nil then afterconstruction }
addstatement(newstatement,cifnode.create(
caddnode.create(andn,
caddnode.create(unequaln,
load_self_pointer_node,
cnilnode.create),
caddnode.create(unequaln,
load_vmt_pointer_node,
cnilnode.create)),
ccallnode.create(nil,tprocsym(srsym),srsym.owner,load_self_node,[]),
nil));
end
else
internalerror(200305106);
end;
{ a destructor needs a help procedure }
if (current_procinfo.procdef.proctypeoption=potype_destructor) then
begin
if is_class(current_procinfo.procdef._class) then
begin
srsym:=search_class_member(current_procinfo.procdef._class,'FREEINSTANCE');
if assigned(srsym) and
(srsym.typ=procsym) then
begin
{ if self<>0 and vmt=1 then freeinstance }
addstatement(newstatement,cifnode.create(
caddnode.create(andn,
caddnode.create(unequaln,
load_self_pointer_node,
cnilnode.create),
caddnode.create(equaln,
ctypeconvnode.create(
load_vmt_pointer_node,
voidpointertype),
cpointerconstnode.create(1,voidpointertype))),
ccallnode.create(nil,tprocsym(srsym),srsym.owner,load_self_node,[]),
nil));
end
else
internalerror(200305108);
end
else
if is_object(current_procinfo.procdef._class) then
begin
{ finalize object data }
if current_procinfo.procdef._class.needs_inittable then
addstatement(newstatement,finalize_data_node(load_self_node));
{ parameter 3 : vmt_offset }
{ parameter 2 : pointer to vmt }
{ parameter 1 : self pointer }
para:=ccallparanode.create(
cordconstnode.create(current_procinfo.procdef._class.vmt_offset,s32inttype,false),
ccallparanode.create(
ctypeconvnode.create_internal(
load_vmt_pointer_node,
voidpointertype),
ccallparanode.create(
ctypeconvnode.create_internal(
load_self_pointer_node,
voidpointertype),
nil)));
addstatement(newstatement,
ccallnode.createintern('fpc_help_destructor',para));
end
else
internalerror(200305105);
end;
end;
end;
function generate_except_block:tnode;
var
pd : tprocdef;
newstatement : tstatementnode;
begin
generate_except_block:=internalstatements(newstatement);
{ a constructor needs call destructor (if available) when it
is not inherited }
if assigned(current_procinfo.procdef._class) and
(current_procinfo.procdef.proctypeoption=potype_constructor) then
begin
pd:=current_procinfo.procdef._class.searchdestructor;
if assigned(pd) then
begin
{ if vmt<>0 then call destructor }
addstatement(newstatement,cifnode.create(
caddnode.create(unequaln,
load_vmt_pointer_node,
cnilnode.create),
ccallnode.create(nil,tprocsym(pd.procsym),pd.procsym.owner,load_self_node,[]),
nil));
end;
end
else
begin
{ no constructor }
{ must be the return value finalized before reraising the exception? }
if (not is_void(current_procinfo.procdef.rettype.def)) and
(current_procinfo.procdef.rettype.def.needs_inittable) and
(not is_class(current_procinfo.procdef.rettype.def)) then
addstatement(newstatement,finalize_data_node(load_result_node));
end;
end;
{****************************************************************************
TCGProcInfo
****************************************************************************}
constructor tcgprocinfo.create(aparent:tprocinfo);
begin
inherited Create(aparent);
nestedprocs:=tlinkedlist.create;
end;
destructor tcgprocinfo.destroy;
begin
nestedprocs.free;
if assigned(code) then
code.free;
inherited destroy;
end;
procedure tcgprocinfo.printproc;
begin
assign(printnodefile,treelogfilename);
{$I-}
append(printnodefile);
if ioresult<>0 then
rewrite(printnodefile);
{$I+}
if ioresult<>0 then
begin
Comment(V_Error,'Error creating '+treelogfilename);
exit;
end;
writeln(printnodefile);
writeln(printnodefile,'*******************************************************************************');
writeln(printnodefile,procdef.fullprocname(false));
writeln(printnodefile,'*******************************************************************************');
printnode(printnodefile,code);
close(printnodefile);
end;
procedure tcgprocinfo.add_entry_exit_code;
var
finalcode,
bodyentrycode,
bodyexitcode,
exceptcode : tnode;
newblock : tblocknode;
codestatement,
newstatement : tstatementnode;
oldfilepos : tfileposinfo;
begin
oldfilepos:=aktfilepos;
{ Generate code/locations used at start of proc }
aktfilepos:=entrypos;
entry_asmnode:=casmnode.create_get_position;
loadpara_asmnode:=casmnode.create_get_position;
stackcheck_asmnode:=casmnode.create_get_position;
init_asmnode:=casmnode.create_get_position;
bodyentrycode:=generate_bodyentry_block;
{ Generate code/locations used at end of proc }
aktfilepos:=exitpos;
exitlabel_asmnode:=casmnode.create_get_position;
final_asmnode:=casmnode.create_get_position;
bodyexitcode:=generate_bodyexit_block;
{ Generate procedure by combining init+body+final,
depending on the implicit finally we need to add
an try...finally...end wrapper }
newblock:=internalstatements(newstatement);
if (cs_implicit_exceptions in aktmoduleswitches) and
(pi_needs_implicit_finally in flags) and
{ but it's useless in init/final code of units }
not(procdef.proctypeoption in [potype_unitfinalize,potype_unitinit]) then
begin
{ Generate special exception block only needed when
implicit finaly is used }
aktfilepos:=exitpos;
exceptcode:=generate_except_block;
{ Generate code that will be in the try...finally }
finalcode:=internalstatements(codestatement);
addstatement(codestatement,bodyexitcode);
addstatement(codestatement,final_asmnode);
{ Initialize before try...finally...end frame }
addstatement(newstatement,loadpara_asmnode);
addstatement(newstatement,stackcheck_asmnode);
addstatement(newstatement,entry_asmnode);
addstatement(newstatement,init_asmnode);
addstatement(newstatement,bodyentrycode);
aktfilepos:=entrypos;
addstatement(newstatement,ctryfinallynode.create_implicit(
code,
finalcode,
exceptcode));
addstatement(newstatement,exitlabel_asmnode);
{ set flag the implicit finally has been generated }
include(flags,pi_has_implicit_finally);
end
else
begin
addstatement(newstatement,loadpara_asmnode);
addstatement(newstatement,stackcheck_asmnode);
addstatement(newstatement,entry_asmnode);
addstatement(newstatement,init_asmnode);
addstatement(newstatement,bodyentrycode);
addstatement(newstatement,code);
addstatement(newstatement,exitlabel_asmnode);
addstatement(newstatement,bodyexitcode);
addstatement(newstatement,final_asmnode);
end;
do_firstpass(newblock);
code:=newblock;
aktfilepos:=oldfilepos;
end;
procedure clearrefs(p : tnamedindexitem;arg:pointer);
begin
if (tsym(p).typ in [localvarsym,paravarsym,globalvarsym]) then
if tabstractvarsym(p).refs>1 then
tabstractvarsym(p).refs:=1;
end;
procedure tcgprocinfo.generate_code;
var
oldprocinfo : tprocinfo;
oldaktmaxfpuregisters : longint;
oldfilepos : tfileposinfo;
templist : Taasmoutput;
headertai : tai;
begin
{ the initialization procedure can be empty, then we
don't need to generate anything. When it was an empty
procedure there would be at least a blocknode }
if not assigned(code) then
exit;
{ We need valid code }
if Errorcount<>0 then
exit;
{ The RA and Tempgen shall not be available yet }
if assigned(tg) then
internalerror(200309201);
oldprocinfo:=current_procinfo;
oldfilepos:=aktfilepos;
oldaktmaxfpuregisters:=aktmaxfpuregisters;
current_procinfo:=self;
aktfilepos:=entrypos;
{ get new labels }
aktbreaklabel:=nil;
aktcontinuelabel:=nil;
templist:=Taasmoutput.create;
{ add parast/localst to symtablestack }
add_to_symtablestack;
{ when size optimization only count occurrence }
if cs_littlesize in aktglobalswitches then
cg.t_times:=1
else
{ reference for repetition is 100 }
cg.t_times:=100;
{ clear register count }
symtablestack.foreach_static(@clearrefs,nil);
symtablestack.next.foreach_static(@clearrefs,nil);
{ there's always a call to FPC_INITIALIZEUNITS/FPC_DO_EXIT in the main program }
if (procdef.localst.symtablelevel=main_program_level) and
(not current_module.is_unit) then
include(flags,pi_do_call);
{ set implicit_finally flag when there are locals/paras to be finalized }
current_procinfo.procdef.parast.foreach_static(@check_finalize_paras,nil);
current_procinfo.procdef.localst.foreach_static(@check_finalize_locals,nil);
{ firstpass everything }
flowcontrol:=[];
do_firstpass(code);
if code.registersfpu>0 then
include(current_procinfo.flags,pi_uses_fpu);
{ add implicit entry and exit code }
add_entry_exit_code;
{ only do secondpass if there are no errors }
if ErrorCount=0 then
begin
{ set the start offset to the start of the temp area in the stack }
tg:=ttgobj.create;
{ Create register allocator }
cg.init_register_allocators;
set_first_temp_offset;
generate_parameter_info;
{ Allocate space in temp/registers for parast and localst }
aktfilepos:=entrypos;
gen_alloc_symtable(aktproccode,procdef.parast);
gen_alloc_symtable(aktproccode,procdef.localst);
{ Store temp offset for information about 'real' temps }
tempstart:=tg.lasttemp;
{ Generate code to load register parameters in temps and insert local
copies for values parameters. This must be done before the code for the
body is generated because the localloc is updated.
Note: The generated code will be inserted after the code generation of
the body is finished, because only then the position is known }
{$ifdef oldregvars}
assign_regvars(code);
{$endif oldreg}
aktfilepos:=entrypos;
gen_load_para_value(templist);
{ caller paraloc info is also necessary in the stackframe_entry
code of the ppc (and possibly other processors) }
if not procdef.has_paraloc_info then
begin
procdef.requiredargarea:=paramanager.create_paraloc_info(procdef,callerside);
procdef.has_paraloc_info:=true;
end;
{ generate code for the node tree }
do_secondpass(code);
aktproccode.concatlist(exprasmlist);
{$ifdef i386}
procdef.fpu_used:=code.registersfpu;
{$endif i386}
{ The position of the loadpara_asmnode is now known }
aktproccode.insertlistafter(loadpara_asmnode.currenttai,templist);
{ first generate entry and initialize code with the correct
position and switches }
aktfilepos:=entrypos;
aktlocalswitches:=entryswitches;
gen_entry_code(templist);
aktproccode.insertlistafter(entry_asmnode.currenttai,templist);
gen_initialize_code(templist);
aktproccode.insertlistafter(init_asmnode.currenttai,templist);
{ now generate finalize and exit code with the correct position
and switches }
aktfilepos:=exitpos;
aktlocalswitches:=exitswitches;
gen_finalize_code(templist);
{ the finalcode must be concated if there was no position available,
using insertlistafter will result in an insert at the start
when currentai=nil }
if assigned(final_asmnode.currenttai) then
aktproccode.insertlistafter(final_asmnode.currenttai,templist)
else
aktproccode.concatlist(templist);
{ insert exit label at the correct position }
cg.a_label(templist,aktexitlabel);
if assigned(exitlabel_asmnode.currenttai) then
aktproccode.insertlistafter(exitlabel_asmnode.currenttai,templist)
else
aktproccode.concatlist(templist);
{ exit code }
gen_exit_code(templist);
aktproccode.concatlist(templist);
{$ifdef OLDREGVARS}
{ note: this must be done only after as much code as possible has }
{ been generated. The result is that when you ungetregister() a }
{ regvar, it will actually free the regvar (and alse free the }
{ the regvars at the same time). Doing this too early will }
{ confuse the register allocator, as the regvars will still be }
{ used. It should be done before loading the result regs (so }
{ they don't conflict with the regvars) and before }
{ gen_entry_code (that one has to be able to allocate the }
{ regvars again) (JM) }
free_regvars(aktproccode);
{$endif OLDREGVARS}
{ add code that will load the return value, this is not done
for assembler routines when they didn't reference the result
variable }
gen_load_return_value(templist);
aktproccode.concatlist(templist);
{ generate symbol and save end of header position }
aktfilepos:=entrypos;
gen_proc_symbol(templist);
headertai:=tai(templist.last);
{ insert symbol }
aktproccode.insertlist(templist);
{ Free space in temp/registers for parast and localst, must be
done after gen_entry_code }
aktfilepos:=exitpos;
gen_free_symtable(aktproccode,procdef.localst);
gen_free_symtable(aktproccode,procdef.parast);
{ Already reserve all registers for stack checking code and
generate the call to the helper function }
if (cs_check_stack in entryswitches) and
not(po_assembler in procdef.procoptions) and
(current_procinfo.procdef.proctypeoption<>potype_proginit) then
begin
aktfilepos:=entrypos;
gen_stack_check_call(templist);
aktproccode.insertlistafter(stackcheck_asmnode.currenttai,templist)
end;
{ The procedure body is finished, we can now
allocate the registers }
cg.do_register_allocation(aktproccode,headertai);
{ Add save and restore of used registers }
aktfilepos:=entrypos;
gen_save_used_regs(templist);
aktproccode.insertlistafter(headertai,templist);
aktfilepos:=exitpos;
gen_restore_used_regs(aktproccode);
{ We know the size of the stack, now we can generate the
parameter that is passed to the stack checking code }
if (cs_check_stack in entryswitches) and
not(po_assembler in procdef.procoptions) and
(current_procinfo.procdef.proctypeoption<>potype_proginit) then
begin
aktfilepos:=entrypos;
gen_stack_check_size_para(templist);
aktproccode.insertlistafter(stackcheck_asmnode.currenttai,templist)
end;
{ Add entry code (stack allocation) after header }
aktfilepos:=entrypos;
gen_proc_entry_code(templist);
aktproccode.insertlistafter(headertai,templist);
{ Add exit code at the end }
aktfilepos:=exitpos;
gen_proc_exit_code(templist);
aktproccode.concatlist(templist);
{ check if the implicit finally has been generated. The flag
should already be set in pass1 }
if (cs_implicit_exceptions in aktmoduleswitches) and
not(procdef.proctypeoption in [potype_unitfinalize,potype_unitinit]) and
(pi_needs_implicit_finally in flags) and
not(pi_has_implicit_finally in flags) then
internalerror(200405231);
{$ifndef NoOpt}
if not(cs_no_regalloc in aktglobalswitches) then
begin
if (cs_optimize in aktglobalswitches) and
{ do not optimize pure assembler procedures }
not(pi_is_assembler in flags) then
optimize(aktproccode);
end;
{$endif NoOpt}
{ Add end symbol and debug info }
aktfilepos:=exitpos;
gen_proc_symbol_end(templist);
aktproccode.concatlist(templist);
{$ifdef ARM}
{ because of the limited constant size of the arm, all data access is done pc relative }
insertpcrelativedata(aktproccode,aktlocaldata);
{$endif ARM}
{$ifdef POWERPC}
fixup_jmps(aktproccode);
{$endif POWERPC}
{$ifdef POWERPC64}
fixup_jmps(aktproccode);
{$endif POWERPC64}
{ insert line debuginfo }
if (cs_debuginfo in aktmoduleswitches) or
(cs_use_lineinfo in aktglobalswitches) then
debuginfo.insertlineinfo(aktproccode);
{ add the procedure to the al_procedures }
maybe_new_object_file(asmlist[al_procedures]);
new_section(asmlist[al_procedures],sec_code,lower(procdef.mangledname),aktalignment.procalign);
asmlist[al_procedures].concatlist(aktproccode);
{ save local data (casetable) also in the same file }
if assigned(aktlocaldata) and
(not aktlocaldata.empty) then
asmlist[al_procedures].concatlist(aktlocaldata);
{ only now we can remove the temps }
tg.resettempgen;
{ stop tempgen and ra }
tg.free;
cg.done_register_allocators;
tg:=nil;
end;
{ restore symtablestack }
remove_from_symtablestack;
{ restore }
templist.free;
aktmaxfpuregisters:=oldaktmaxfpuregisters;
aktfilepos:=oldfilepos;
current_procinfo:=oldprocinfo;
end;
procedure tcgprocinfo.add_to_symtablestack;
var
_class,hp : tobjectdef;
begin
{ insert symtables for the class, but only if it is no nested function }
if assigned(procdef._class) and
not(assigned(parent) and
assigned(parent.procdef) and
assigned(parent.procdef._class)) then
begin
{ insert them in the reverse order }
hp:=nil;
repeat
_class:=procdef._class;
while _class.childof<>hp do
_class:=_class.childof;
hp:=_class;
_class.symtable.next:=symtablestack;
symtablestack:=_class.symtable;
until hp=procdef._class;
end;
{ insert parasymtable in symtablestack when parsing
a function }
if procdef.parast.symtablelevel>=normal_function_level then
begin
procdef.parast.next:=symtablestack;
symtablestack:=procdef.parast;
end;
procdef.localst.next:=symtablestack;
symtablestack:=procdef.localst;
end;
procedure tcgprocinfo.remove_from_symtablestack;
begin
{ remove localst/parast }
if procdef.parast.symtablelevel>=normal_function_level then
symtablestack:=symtablestack.next.next
else
symtablestack:=symtablestack.next;
{ remove class member symbol tables }
while symtablestack.symtabletype=objectsymtable do
symtablestack:=symtablestack.next;
end;
procedure tcgprocinfo.resetprocdef;
begin
{ remove code tree, if not inline procedure }
if assigned(code) then
begin
{ the inline procedure has already got a copy of the tree
stored in procdef.inlininginfo }
code.free;
code:=nil;
end;
end;
function checknodeinlining(procdef: tprocdef): boolean;
var
i : integer;
currpara : tparavarsym;
begin
result := false;
if (pi_has_assembler_block in current_procinfo.flags) then
exit;
for i:=0 to procdef.paras.count-1 do
begin
currpara:=tparavarsym(procdef.paras[i]);
{ we can't handle formaldefs and special arrays (the latter may need a }
{ re-basing of the index, i.e. if you pass an array[1..10] as open array, }
{ you have to add 1 to all index operations if you directly inline it }
if ((currpara.varspez in [vs_out,vs_var]) and
(currpara.vartype.def.deftype=formaldef)) or
is_special_array(currpara.vartype.def) then
exit;
end;
result:=true;
end;
procedure tcgprocinfo.parse_body;
var
oldprocinfo : tprocinfo;
oldblock_type : tblock_type;
begin
oldprocinfo:=current_procinfo;
oldblock_type:=block_type;
{ reset break and continue labels }
block_type:=bt_body;
current_procinfo:=self;
{ calculate the lexical level }
if procdef.parast.symtablelevel>maxnesting then
Message(parser_e_too_much_lexlevel);
{ static is also important for local procedures !! }
if (po_staticmethod in procdef.procoptions) then
allow_only_static:=true
else if (procdef.parast.symtablelevel=normal_function_level) then
allow_only_static:=false;
{$ifdef state_tracking}
{ aktstate:=Tstate_storage.create;}
{$endif state_tracking}
{ create a local symbol table for this routine }
if not assigned(procdef.localst) then
procdef.insert_localst;
{ add parast/localst to symtablestack }
add_to_symtablestack;
{ constant symbols are inserted in this symboltable }
constsymtable:=symtablestack;
{ save entry info }
entrypos:=aktfilepos;
entryswitches:=aktlocalswitches;
{ parse the code ... }
code:=block(current_module.islibrary);
{ save exit info }
exitswitches:=aktlocalswitches;
exitpos:=last_endtoken_filepos;
{ the procedure is now defined }
procdef.forwarddef:=false;
if assigned(code) then
begin
{ get a better entry point }
entrypos:=code.fileinfo;
{ Finish type checking pass }
do_resulttypepass(code);
end;
{ Check for unused labels, forwards, symbols for procedures. Static
symtable is checked in pmodules.
The check must be done after the resulttypepass }
if (Errorcount=0) and
(tstoredsymtable(procdef.localst).symtabletype<>staticsymtable) then
begin
{ check if forwards are resolved }
tstoredsymtable(procdef.localst).check_forwards;
{ check if all labels are used }
tstoredsymtable(procdef.localst).checklabels;
{ remove cross unit overloads }
tstoredsymtable(procdef.localst).unchain_overloaded;
{ check for unused symbols, but only if there is no asm block }
if not(pi_has_assembler_block in flags) then
begin
tstoredsymtable(procdef.localst).allsymbolsused;
tstoredsymtable(procdef.parast).allsymbolsused;
end;
end;
if (po_inline in procdef.procoptions) then
begin
{ Can we inline this procedure? }
if checknodeinlining(procdef) then
begin
new(procdef.inlininginfo);
include(procdef.procoptions,po_has_inlininginfo);
procdef.inlininginfo^.code:=code.getcopy;
procdef.inlininginfo^.flags:=current_procinfo.flags;
{ The blocknode needs to set an exit label }
if procdef.inlininginfo^.code.nodetype=blockn then
include(procdef.inlininginfo^.code.flags,nf_block_with_exit);
end;
end;
{ Print the node to tree.log }
if paraprintnodetree=1 then
printproc;
{ ... remove symbol tables }
remove_from_symtablestack;
{$ifdef state_tracking}
{ aktstate.destroy;}
{$endif state_tracking}
{ reset to normal non static function }
if (procdef.parast.symtablelevel=normal_function_level) then
allow_only_static:=false;
current_procinfo:=oldprocinfo;
block_type:=oldblock_type;
end;
{****************************************************************************
PROCEDURE/FUNCTION PARSING
****************************************************************************}
procedure check_init_paras(p:tnamedindexitem;arg:pointer);
begin
if tsym(p).typ<>paravarsym then
exit;
with tparavarsym(p) do
if (not is_class(vartype.def) and
vartype.def.needs_inittable and
(varspez in [vs_value,vs_out])) then
include(current_procinfo.flags,pi_do_call);
end;
procedure read_proc;
{
Parses the procedure directives, then parses the procedure body, then
generates the code for it
}
procedure do_generate_code(pi:tcgprocinfo);
var
hpi : tcgprocinfo;
begin
{ generate code for this procedure }
pi.generate_code;
{ process nested procs }
hpi:=tcgprocinfo(pi.nestedprocs.first);
while assigned(hpi) do
begin
do_generate_code(hpi);
hpi:=tcgprocinfo(hpi.next);
end;
pi.resetprocdef;
end;
var
old_current_procinfo : tprocinfo;
oldconstsymtable : tsymtable;
oldfailtokenmode : tmodeswitch;
pdflags : tpdflags;
pd : tprocdef;
isnestedproc : boolean;
s : string;
begin
{ save old state }
oldconstsymtable:=constsymtable;
old_current_procinfo:=current_procinfo;
{ reset current_procinfo.procdef to nil to be sure that nothing is writing
to an other procdef }
current_procinfo:=nil;
{ parse procedure declaration }
if assigned(old_current_procinfo) and
assigned(old_current_procinfo.procdef) then
pd:=parse_proc_dec(old_current_procinfo.procdef._class)
else
pd:=parse_proc_dec(nil);
{ set the default function options }
if parse_only then
begin
pd.forwarddef:=true;
{ set also the interface flag, for better error message when the
implementation doesn't much this header }
pd.interfacedef:=true;
include(pd.procoptions,po_global);
pdflags:=[pd_interface];
end
else
begin
pdflags:=[pd_body];
if (not current_module.in_interface) then
include(pdflags,pd_implemen);
if (not current_module.is_unit) or
maybe_smartlink_symbol then
include(pd.procoptions,po_global);
pd.forwarddef:=false;
end;
{ parse the directives that may follow }
parse_proc_directives(pd,pdflags);
{ hint directives, these can be separated by semicolons here,
that needs to be handled here with a loop (PFV) }
while try_consume_hintdirective(pd.symoptions) do
Consume(_SEMICOLON);
{ Set calling convention }
handle_calling_convention(pd);
{ search for forward declarations }
if not proc_add_definition(pd) then
begin
{ A method must be forward defined (in the object declaration) }
if assigned(pd._class) and
(not assigned(old_current_procinfo.procdef._class)) then
begin
MessagePos1(pd.fileinfo,parser_e_header_dont_match_any_member,pd.fullprocname(false));
tprocsym(pd.procsym).write_parameter_lists(pd);
end
else
begin
{ Give a better error if there is a forward def in the interface and only
a single implementation }
if (not pd.forwarddef) and
(not pd.interfacedef) and
(tprocsym(pd.procsym).procdef_count>1) and
tprocsym(pd.procsym).first_procdef.forwarddef and
tprocsym(pd.procsym).first_procdef.interfacedef and
not(tprocsym(pd.procsym).procdef_count>2) then
begin
MessagePos1(pd.fileinfo,parser_e_header_dont_match_forward,pd.fullprocname(false));
tprocsym(pd.procsym).write_parameter_lists(pd);
end;
end;
end;
{ Set mangled name }
proc_set_mangledname(pd);
{ compile procedure when a body is needed }
if (pd_body in pdflags) then
begin
Message1(parser_d_procedure_start,pd.fullprocname(false));
{ create a new procedure }
current_procinfo:=cprocinfo.create(old_current_procinfo);
current_module.procinfo:=current_procinfo;
current_procinfo.procdef:=pd;
isnestedproc:=(current_procinfo.procdef.parast.symtablelevel>normal_function_level);
{ Insert mangledname }
pd.aliasnames.insert(pd.mangledname);
{ Handle Export of this procedure }
if (po_exports in pd.procoptions) and
(target_info.system in [system_i386_os2,system_i386_emx]) then
begin
pd.aliasnames.insert(pd.procsym.realname);
if cs_link_deffile in aktglobalswitches then
deffile.AddExport(pd.mangledname);
end;
{ Insert result variables in the localst }
insert_funcret_local(pd);
{ check if there are para's which require initing -> set }
{ pi_do_call (if not yet set) }
if not(pi_do_call in current_procinfo.flags) then
pd.parast.foreach_static(@check_init_paras,nil);
{ set _FAIL as keyword if constructor }
if (pd.proctypeoption=potype_constructor) then
begin
oldfailtokenmode:=tokeninfo^[_FAIL].keyword;
tokeninfo^[_FAIL].keyword:=m_all;
end;
tcgprocinfo(current_procinfo).parse_body;
{ When it's a nested procedure then defer the code generation,
when back at normal function level then generate the code
for all defered nested procedures and the current procedure }
if isnestedproc then
tcgprocinfo(current_procinfo.parent).nestedprocs.insert(current_procinfo)
else
begin
{ We can't support inlining for procedures that have nested
procedures because the nested procedures use a fixed offset
for accessing locals in the parent procedure (PFV) }
if (po_inline in current_procinfo.procdef.procoptions) and
(tcgprocinfo(current_procinfo).nestedprocs.count>0) then
begin
Message1(parser_w_not_supported_for_inline,'nested procedures');
Message(parser_w_inlining_disabled);
current_procinfo.procdef.proccalloption:=pocall_default;
end;
do_generate_code(tcgprocinfo(current_procinfo));
end;
{ reset _FAIL as _SELF normal }
if (pd.proctypeoption=potype_constructor) then
tokeninfo^[_FAIL].keyword:=oldfailtokenmode;
{ release procinfo }
if tprocinfo(current_module.procinfo)<>current_procinfo then
internalerror(200304274);
current_module.procinfo:=current_procinfo.parent;
if not isnestedproc then
current_procinfo.free;
consume(_SEMICOLON);
end
else
begin
{ Handle imports }
if (po_external in pd.procoptions) then
begin
{ External declared in implementation, and there was already a
forward (or interface) declaration then we need to generate
a stub that calls the external routine }
if (not pd.forwarddef) and
(pd.hasforward) and
not(
assigned(pd.import_dll) and
(target_info.system in [system_i386_win32,system_i386_wdosx,
system_i386_emx,system_i386_os2,system_arm_wince,system_i386_wince])
) then
begin
s:=proc_get_importname(pd);
if s<>'' then
gen_external_stub(asmlist[al_procedures],pd,{$IFDEF POWERPC64}'.'+{$ENDIF}s);
end;
{ Import DLL specified? }
if assigned(pd.import_dll) then
begin
{ create importlib if not already done }
if not(current_module.uses_imports) then
begin
current_module.uses_imports:=true;
importlib.preparelib(current_module.realmodulename^);
end;
if assigned(pd.import_name) then
importlib.importprocedure(pd,pd.import_dll^,pd.import_nr,pd.import_name^)
else
importlib.importprocedure(pd,pd.import_dll^,pd.import_nr,'');
end
else
begin
{ add import name to external list for DLL scanning }
if target_info.DllScanSupported then
current_module.externals.insert(tExternalsItem.create(proc_get_importname(pd)));
end;
end;
end;
{ Restore old state }
constsymtable:=oldconstsymtable;
current_procinfo:=old_current_procinfo;
end;
{****************************************************************************
DECLARATION PARSING
****************************************************************************}
{ search in symtablestack for not complete classes }
procedure check_forward_class(p : tnamedindexitem;arg:pointer);
begin
if (tsym(p).typ=typesym) and
(ttypesym(p).restype.def.deftype=objectdef) and
(oo_is_forward in tobjectdef(ttypesym(p).restype.def).objectoptions) then
MessagePos1(tsym(p).fileinfo,sym_e_forward_type_not_resolved,tsym(p).realname);
end;
procedure read_declarations(islibrary : boolean);
begin
repeat
if not assigned(current_procinfo) then
internalerror(200304251);
case token of
_LABEL:
label_dec;
_CONST:
const_dec;
_TYPE:
type_dec;
_VAR:
var_dec;
_THREADVAR:
threadvar_dec;
_CONSTRUCTOR,
_DESTRUCTOR,
_FUNCTION,
_PROCEDURE,
_OPERATOR,
_CLASS:
read_proc;
_EXPORTS:
begin
if not(assigned(current_procinfo.procdef.localst)) or
(current_procinfo.procdef.localst.symtablelevel>main_program_level) or
(current_module.is_unit) then
begin
Message(parser_e_syntax_error);
consume_all_until(_SEMICOLON);
end
else if islibrary or
(target_info.system in [
system_i386_win32,
system_i386_wdosx,
system_i386_Netware,
system_i386_netwlibc,
system_arm_wince,
system_x86_64_win64,
system_ia64_win64]+system_linux) then
read_exports
else
begin
Message(parser_w_unsupported_feature);
consume(_BEGIN);
end;
end
else
begin
case idtoken of
_RESOURCESTRING :
begin
{ m_class is needed, because the resourcestring
loading is in the ObjPas unit }
if (m_class in aktmodeswitches) then
resourcestring_dec
else
break;
end;
_PROPERTY:
begin
if (m_fpc in aktmodeswitches) then
property_dec
else
break;
end;
else
break;
end;
end;
end;
until false;
{ check for incomplete class definitions, this is only required
for fpc modes }
if (m_fpc in aktmodeswitches) then
symtablestack.foreach_static(@check_forward_class,nil);
end;
procedure read_interface_declarations;
begin
repeat
case token of
_CONST :
const_dec;
_TYPE :
type_dec;
_VAR :
var_dec;
_THREADVAR :
threadvar_dec;
_FUNCTION,
_PROCEDURE,
_OPERATOR :
read_proc;
else
begin
case idtoken of
_RESOURCESTRING :
resourcestring_dec;
_PROPERTY:
begin
if (m_fpc in aktmodeswitches) then
property_dec
else
break;
end;
else
break;
end;
end;
end;
until false;
{ check for incomplete class definitions, this is only required
for fpc modes }
if (m_fpc in aktmodeswitches) then
symtablestack.foreach_static(@check_forward_class,nil);
end;
end.