paweld/fpc
1
0
Fork 0
mirror of https://gitlab.com/freepascal.org/fpc/source.git synced 2025-11-04 10:19:31 +01:00
Code Issues Packages Projects Releases Wiki Activity
ec99b1ba40
fpc/compiler/x86/rax86.pas
pierre f23695cf92 * Also declare GOT in main program 
git-svn-id: trunk@16103 -
2010-10-07 22:14:58 +00:00

781 lines
22 KiB
ObjectPascal
Raw Blame History

{
Copyright (c) 1998-2002 by Carl Eric Codere and Peter Vreman
Handles the common x86 assembler reader routines
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
****************************************************************************
}
{
Contains the common x86 (i386 and x86-64) assembler reader routines.
}
unit rax86;
{$i fpcdefs.inc}
interface
uses
aasmbase,aasmtai,aasmdata,aasmcpu,
cpubase,rautils,cclasses;
{ Parser helpers }
function is_prefix(t:tasmop):boolean;
function is_override(t:tasmop):boolean;
Function CheckPrefix(prefixop,op:tasmop): Boolean;
Function CheckOverride(overrideop,op:tasmop): Boolean;
Procedure FWaitWarning;
type
Tx86Operand=class(TOperand)
opsize : topsize;
Procedure SetSize(_size:longint;force:boolean);override;
Procedure SetCorrectSize(opcode:tasmop);override;
Function CheckOperand: boolean; override;
end;
Tx86Instruction=class(TInstruction)
OpOrder : TOperandOrder;
opsize : topsize;
constructor Create(optype : tcoperand);override;
{ Operand sizes }
procedure AddReferenceSizes;
procedure SetInstructionOpsize;
procedure CheckOperandSizes;
procedure CheckNonCommutativeOpcodes;
procedure SwapOperands;
{ opcode adding }
function ConcatInstruction(p : TAsmList) : tai;override;
end;
const
AsmPrefixes = 6;
AsmPrefix : array[0..AsmPrefixes-1] of TasmOP =(
A_LOCK,A_REP,A_REPE,A_REPNE,A_REPNZ,A_REPZ
);
AsmOverrides = 6;
AsmOverride : array[0..AsmOverrides-1] of TasmOP =(
A_SEGCS,A_SEGES,A_SEGDS,A_SEGFS,A_SEGGS,A_SEGSS
);
CondAsmOps=3;
CondAsmOp:array[0..CondAsmOps-1] of TasmOp=(
A_CMOVcc, A_Jcc, A_SETcc
);
CondAsmOpStr:array[0..CondAsmOps-1] of string[4]=(
'CMOV','J','SET'
);
implementation
uses
globtype,globals,systems,verbose,
procinfo,
cpuinfo,cgbase,cgutils,
itcpugas,cgx86;
{*****************************************************************************
Parser Helpers
*****************************************************************************}
function is_prefix(t:tasmop):boolean;
var
i : longint;
Begin
is_prefix:=false;
for i:=1 to AsmPrefixes do
if t=AsmPrefix[i-1] then
begin
is_prefix:=true;
exit;
end;
end;
function is_override(t:tasmop):boolean;
var
i : longint;
Begin
is_override:=false;
for i:=1 to AsmOverrides do
if t=AsmOverride[i-1] then
begin
is_override:=true;
exit;
end;
end;
Function CheckPrefix(prefixop,op:tasmop): Boolean;
{ Checks if the prefix is valid with the following opcode }
{ return false if not, otherwise true }
Begin
CheckPrefix := TRUE;
(* Case prefix of
A_REP,A_REPNE,A_REPE:
Case opcode Of
A_SCASB,A_SCASW,A_SCASD,
A_INS,A_OUTS,A_MOVS,A_CMPS,A_LODS,A_STOS:;
Else
Begin
CheckPrefix := FALSE;
exit;
end;
end; { case }
A_LOCK:
Case opcode Of
A_BT,A_BTS,A_BTR,A_BTC,A_XCHG,A_ADD,A_OR,A_ADC,A_SBB,A_AND,A_SUB,
A_XOR,A_NOT,A_NEG,A_INC,A_DEC:;
Else
Begin
CheckPrefix := FALSE;
Exit;
end;
end; { case }
A_NONE: exit; { no prefix here }
else
CheckPrefix := FALSE;
end; { end case } *)
end;
Function CheckOverride(overrideop,op:tasmop): Boolean;
{ Check if the override is valid, and if so then }
{ update the instr variable accordingly. }
Begin
CheckOverride := true;
{ Case instr.getinstruction of
A_MOVS,A_XLAT,A_CMPS:
Begin
CheckOverride := TRUE;
Message(assem_e_segment_override_not_supported);
end
end }
end;
Procedure FWaitWarning;
begin
if (target_info.system=system_i386_GO32V2) and (cs_fp_emulation in current_settings.moduleswitches) then
Message(asmr_w_fwait_emu_prob);
end;
{*****************************************************************************
TX86Operand
*****************************************************************************}
Procedure Tx86Operand.SetSize(_size:longint;force:boolean);
begin
inherited SetSize(_size,force);
{ OS_64 will be set to S_L and be fixed later
in SetCorrectSize }
opsize:=TCGSize2Opsize[size];
end;
Procedure Tx86Operand.SetCorrectSize(opcode:tasmop);
begin
if gas_needsuffix[opcode]=attsufFPU then
begin
case size of
OS_32 : opsize:=S_FS;
OS_64 : opsize:=S_FL;
end;
end
else if gas_needsuffix[opcode]=attsufFPUint then
begin
case size of
OS_16 : opsize:=S_IS;
OS_32 : opsize:=S_IL;
OS_64 : opsize:=S_IQ;
end;
end;
end;
Function Tx86Operand.CheckOperand: boolean;
begin
result:=true;
if (opr.typ=OPR_Reference) then
begin
if not hasvar then
begin
if (getsupreg(opr.ref.base)=RS_EBP) and (opr.ref.offset>0) then
begin
if current_procinfo.procdef.proccalloption=pocall_register then
message(asmr_w_no_direct_ebp_for_parameter)
else
message(asmr_w_direct_ebp_for_parameter_regcall);
end
else if (getsupreg(opr.ref.base)=RS_EBP) and (opr.ref.offset<0) then
message(asmr_w_direct_ebp_neg_offset)
else if (getsupreg(opr.ref.base)=RS_ESP) and (opr.ref.offset<0) then
message(asmr_w_direct_esp_neg_offset);
end;
if (cs_create_pic in current_settings.moduleswitches) and
assigned(opr.ref.symbol) and
not assigned(opr.ref.relsymbol) and
(opr.ref.refaddr<>addr_pic) then
begin
if (opr.ref.symbol.name <> '_GLOBAL_OFFSET_TABLE_') then
begin
message(asmr_e_need_pic_ref);
result:=false;
end
else
opr.ref.refaddr:=addr_pic;
end;
end;
end;
{*****************************************************************************
T386Instruction
*****************************************************************************}
constructor Tx86Instruction.Create(optype : tcoperand);
begin
inherited Create(optype);
Opsize:=S_NO;
end;
procedure Tx86Instruction.SwapOperands;
begin
Inherited SwapOperands;
{ mark the correct order }
if OpOrder=op_intel then
OpOrder:=op_att
else
OpOrder:=op_intel;
end;
procedure Tx86Instruction.AddReferenceSizes;
{ this will add the sizes for references like [esi] which do not
have the size set yet, it will take only the size if the other
operand is a register }
var
operand2,i : longint;
s : tasmsymbol;
so : aint;
begin
for i:=1 to ops do
begin
operands[i].SetCorrectSize(opcode);
if tx86operand(operands[i]).opsize=S_NO then
begin
{$ifdef x86_64}
if (opcode=A_MOVQ) and
(ops=2) and
(operands[1].opr.typ=OPR_CONSTANT) then
opsize:=S_Q
else
{$endif x86_64}
case operands[i].Opr.Typ of
OPR_LOCAL,
OPR_REFERENCE :
begin
if i=2 then
operand2:=1
else
operand2:=2;
if operand2<ops then
begin
{ Only allow register as operand to take the size from }
if operands[operand2].opr.typ=OPR_REGISTER then
begin
if ((opcode<>A_MOVD) and
(opcode<>A_CVTSI2SS)) then
tx86operand(operands[i]).opsize:=tx86operand(operands[operand2]).opsize;
end
else
begin
{ if no register then take the opsize (which is available with ATT),
if not availble then give an error }
if opsize<>S_NO then
tx86operand(operands[i]).opsize:=opsize
else
begin
if (m_delphi in current_settings.modeswitches) then
Message(asmr_w_unable_to_determine_reference_size_using_dword)
else
Message(asmr_e_unable_to_determine_reference_size);
{ recovery }
tx86operand(operands[i]).opsize:=S_L;
end;
end;
end
else
begin
if opsize<>S_NO then
tx86operand(operands[i]).opsize:=opsize
end;
end;
OPR_SYMBOL :
begin
{ Fix lea which need a reference }
if opcode=A_LEA then
begin
s:=operands[i].opr.symbol;
so:=operands[i].opr.symofs;
operands[i].opr.typ:=OPR_REFERENCE;
Fillchar(operands[i].opr.ref,sizeof(treference),0);
operands[i].opr.ref.symbol:=s;
operands[i].opr.ref.offset:=so;
end;
{$ifdef x86_64}
tx86operand(operands[i]).opsize:=S_Q;
{$else x86_64}
tx86operand(operands[i]).opsize:=S_L;
{$endif x86_64}
end;
end;
end;
end;
end;
procedure Tx86Instruction.SetInstructionOpsize;
begin
if opsize<>S_NO then
exit;
if (OpOrder=op_intel) then
SwapOperands;
case ops of
0 : ;
1 :
begin
{ "push es" must be stored as a long PM }
if ((opcode=A_PUSH) or
(opcode=A_POP)) and
(operands[1].opr.typ=OPR_REGISTER) and
is_segment_reg(operands[1].opr.reg) then
opsize:=S_L
else
opsize:=tx86operand(operands[1]).opsize;
end;
2 :
begin
case opcode of
A_MOVZX,A_MOVSX :
begin
if tx86operand(operands[1]).opsize=S_NO then
begin
tx86operand(operands[1]).opsize:=S_B;
if (m_delphi in current_settings.modeswitches) then
Message(asmr_w_unable_to_determine_reference_size_using_byte)
else
Message(asmr_e_unable_to_determine_reference_size);
end;
case tx86operand(operands[1]).opsize of
S_W :
case tx86operand(operands[2]).opsize of
S_L :
opsize:=S_WL;
end;
S_B :
begin
case tx86operand(operands[2]).opsize of
S_W :
opsize:=S_BW;
S_L :
opsize:=S_BL;
end;
end;
end;
end;
A_MOVD : { movd is a move from a mmx register to a
32 bit register or memory, so no opsize is correct here PM }
exit;
A_MOVQ :
opsize:=S_IQ;
A_OUT :
opsize:=tx86operand(operands[1]).opsize;
else
opsize:=tx86operand(operands[2]).opsize;
end;
end;
3 :
opsize:=tx86operand(operands[3]).opsize;
end;
end;
procedure Tx86Instruction.CheckOperandSizes;
var
sizeerr : boolean;
i : longint;
begin
{ Check only the most common opcodes here, the others are done in
the assembler pass }
case opcode of
A_PUSH,A_POP,A_DEC,A_INC,A_NOT,A_NEG,
A_CMP,A_MOV,
A_ADD,A_SUB,A_ADC,A_SBB,
A_AND,A_OR,A_TEST,A_XOR: ;
else
exit;
end;
{ Handle the BW,BL,WL separatly }
sizeerr:=false;
{ special push/pop selector case }
if ((opcode=A_PUSH) or
(opcode=A_POP)) and
(operands[1].opr.typ=OPR_REGISTER) and
is_segment_reg(operands[1].opr.reg) then
exit;
if opsize in [S_BW,S_BL,S_WL] then
begin
if ops<>2 then
sizeerr:=true
else
begin
case opsize of
S_BW :
sizeerr:=(tx86operand(operands[1]).opsize<>S_B) or (tx86operand(operands[2]).opsize<>S_W);
S_BL :
sizeerr:=(tx86operand(operands[1]).opsize<>S_B) or (tx86operand(operands[2]).opsize<>S_L);
S_WL :
sizeerr:=(tx86operand(operands[1]).opsize<>S_W) or (tx86operand(operands[2]).opsize<>S_L);
end;
end;
end
else
begin
for i:=1 to ops do
begin
if (operands[i].opr.typ<>OPR_CONSTANT) and
(tx86operand(operands[i]).opsize in [S_B,S_W,S_L]) and
(tx86operand(operands[i]).opsize<>opsize) then
sizeerr:=true;
end;
end;
if sizeerr then
begin
{ if range checks are on then generate an error }
if (cs_compilesystem in current_settings.moduleswitches) or
not (cs_check_range in current_settings.localswitches) then
Message(asmr_w_size_suffix_and_dest_dont_match)
else
Message(asmr_e_size_suffix_and_dest_dont_match);
end;
end;
{ This check must be done with the operand in ATT order
i.e.after swapping in the intel reader
but before swapping in the NASM and TASM writers PM }
procedure Tx86Instruction.CheckNonCommutativeOpcodes;
begin
if (OpOrder=op_intel) then
SwapOperands;
if (
(ops=2) and
(operands[1].opr.typ=OPR_REGISTER) and
(operands[2].opr.typ=OPR_REGISTER) and
{ if the first is ST and the second is also a register
it is necessarily ST1 .. ST7 }
((operands[1].opr.reg=NR_ST) or
(operands[1].opr.reg=NR_ST0))
) or
(ops=0) then
if opcode=A_FSUBR then
opcode:=A_FSUB
else if opcode=A_FSUB then
opcode:=A_FSUBR
else if opcode=A_FDIVR then
opcode:=A_FDIV
else if opcode=A_FDIV then
opcode:=A_FDIVR
else if opcode=A_FSUBRP then
opcode:=A_FSUBP
else if opcode=A_FSUBP then
opcode:=A_FSUBRP
else if opcode=A_FDIVRP then
opcode:=A_FDIVP
else if opcode=A_FDIVP then
opcode:=A_FDIVRP;
if (
(ops=1) and
(operands[1].opr.typ=OPR_REGISTER) and
(getregtype(operands[1].opr.reg)=R_FPUREGISTER) and
(operands[1].opr.reg<>NR_ST) and
(operands[1].opr.reg<>NR_ST0)
) then
if opcode=A_FSUBRP then
opcode:=A_FSUBP
else if opcode=A_FSUBP then
opcode:=A_FSUBRP
else if opcode=A_FDIVRP then
opcode:=A_FDIVP
else if opcode=A_FDIVP then
opcode:=A_FDIVRP;
end;
{*****************************************************************************
opcode Adding
*****************************************************************************}
function Tx86Instruction.ConcatInstruction(p : TAsmList) : tai;
var
siz : topsize;
i,asize : longint;
ai : taicpu;
begin
if (OpOrder=op_intel) then
SwapOperands;
ai:=nil;
for i:=1 to Ops do
if not operands[i].CheckOperand then
exit;
{ Get Opsize }
if (opsize<>S_NO) or (Ops=0) then
siz:=opsize
else
begin
if (Ops=2) and (operands[1].opr.typ=OPR_REGISTER) then
siz:=tx86operand(operands[1]).opsize
else
siz:=tx86operand(operands[Ops]).opsize;
{ MOVD should be of size S_LQ or S_QL, but these do not exist PM }
if (ops=2) and
(tx86operand(operands[1]).opsize<>S_NO) and
(tx86operand(operands[2]).opsize<>S_NO) and
(tx86operand(operands[1]).opsize<>tx86operand(operands[2]).opsize) then
siz:=S_NO;
end;
if ((opcode=A_MOVD)or
(opcode=A_CVTSI2SS)) and
((tx86operand(operands[1]).opsize=S_NO) or
(tx86operand(operands[2]).opsize=S_NO)) then
siz:=S_NO;
{ NASM does not support FADD without args
as alias of FADDP
and GNU AS interprets FADD without operand differently
for version 2.9.1 and 2.9.5 !! }
if (ops=0) and
((opcode=A_FADD) or
(opcode=A_FMUL) or
(opcode=A_FSUB) or
(opcode=A_FSUBR) or
(opcode=A_FDIV) or
(opcode=A_FDIVR)) then
begin
if opcode=A_FADD then
opcode:=A_FADDP
else if opcode=A_FMUL then
opcode:=A_FMULP
else if opcode=A_FSUB then
opcode:=A_FSUBP
else if opcode=A_FSUBR then
opcode:=A_FSUBRP
else if opcode=A_FDIV then
opcode:=A_FDIVP
else if opcode=A_FDIVR then
opcode:=A_FDIVRP;
message1(asmr_w_fadd_to_faddp,std_op2str[opcode]);
end;
{It is valid to specify some instructions without operand size.}
if siz=S_NO then
begin
if (ops=1) and (opcode=A_INT) then
siz:=S_B;
if (ops=1) and (opcode=A_RET) or (opcode=A_RETN) or (opcode=A_RETF) then
siz:=S_W;
if (ops=1) and (opcode=A_PUSH) then
begin
{We are a 32 compiler, assume 32-bit by default. This is Delphi
compatible but bad coding practise.}
siz:=S_L;
message(asmr_w_unable_to_determine_reference_size_using_dword);
end;
if (opcode=A_JMP) or (opcode=A_JCC) or (opcode=A_CALL) then
if ops=1 then
siz:=S_NEAR
else
siz:=S_FAR;
end;
{$ifdef x86_64}
{ Convert movq with at least one general registers or constant to a mov instruction }
if (opcode=A_MOVQ) and
(ops=2) and
(
(operands[1].opr.typ=OPR_REGISTER) or
(operands[2].opr.typ=OPR_REGISTER) or
(operands[1].opr.typ=OPR_CONSTANT)
) then
opcode:=A_MOV;
{$endif x86_64}
{ GNU AS interprets FDIV without operand differently
for version 2.9.1 and 2.10
we add explicit args to it !! }
if (ops=0) and
((opcode=A_FSUBP) or
(opcode=A_FSUBRP) or
(opcode=A_FDIVP) or
(opcode=A_FDIVRP) or
(opcode=A_FSUB) or
(opcode=A_FSUBR) or
(opcode=A_FADD) or
(opcode=A_FADDP) or
(opcode=A_FDIV) or
(opcode=A_FDIVR)) then
begin
message1(asmr_w_adding_explicit_args_fXX,std_op2str[opcode]);
ops:=2;
operands[1].opr.typ:=OPR_REGISTER;
operands[2].opr.typ:=OPR_REGISTER;
operands[1].opr.reg:=NR_ST0;
operands[2].opr.reg:=NR_ST1;
end;
if (ops=1) and
(
(operands[1].opr.typ=OPR_REGISTER) and
(getregtype(operands[1].opr.reg)=R_FPUREGISTER) and
(operands[1].opr.reg<>NR_ST) and
(operands[1].opr.reg<>NR_ST0)
) and
(
(opcode=A_FSUBP) or
(opcode=A_FSUBRP) or
(opcode=A_FDIVP) or
(opcode=A_FDIVRP) or
(opcode=A_FADDP) or
(opcode=A_FMULP)
) then
begin
message1(asmr_w_adding_explicit_first_arg_fXX,std_op2str[opcode]);
ops:=2;
operands[2].opr.typ:=OPR_REGISTER;
operands[2].opr.reg:=operands[1].opr.reg;
operands[1].opr.reg:=NR_ST0;
end;
if (ops=1) and
(
(operands[1].opr.typ=OPR_REGISTER) and
(getregtype(operands[1].opr.reg)=R_FPUREGISTER) and
(operands[1].opr.reg<>NR_ST) and
(operands[1].opr.reg<>NR_ST0)
) and
(
(opcode=A_FSUB) or
(opcode=A_FSUBR) or
(opcode=A_FDIV) or
(opcode=A_FDIVR) or
(opcode=A_FADD) or
(opcode=A_FMUL)
) then
begin
message1(asmr_w_adding_explicit_second_arg_fXX,std_op2str[opcode]);
ops:=2;
operands[2].opr.typ:=OPR_REGISTER;
operands[2].opr.reg:=NR_ST0;
end;
{ I tried to convince Linus Torvalds to add
code to support ENTER instruction
(when raising a stack page fault)
but he replied that ENTER is a bad instruction and
Linux does not need to support it
So I think its at least a good idea to add a warning
if someone uses this in assembler code
FPC itself does not use it at all PM }
if (opcode=A_ENTER) and
(target_info.system in [system_i386_linux,system_i386_FreeBSD]) then
Message(asmr_w_enter_not_supported_by_linux);
ai:=taicpu.op_none(opcode,siz);
ai.SetOperandOrder(OpOrder);
ai.Ops:=Ops;
ai.Allocate_oper(Ops);
for i:=1 to Ops do
case operands[i].opr.typ of
OPR_CONSTANT :
ai.loadconst(i-1,operands[i].opr.val);
OPR_REGISTER:
ai.loadreg(i-1,operands[i].opr.reg);
OPR_SYMBOL:
ai.loadsymbol(i-1,operands[i].opr.symbol,operands[i].opr.symofs);
OPR_LOCAL :
with operands[i].opr do
ai.loadlocal(i-1,localsym,localsymofs,localindexreg,
localscale,localgetoffset,localforceref);
OPR_REFERENCE:
begin
ai.loadref(i-1,operands[i].opr.ref);
if operands[i].size<>OS_NO then
begin
asize:=0;
case operands[i].size of
OS_8,OS_S8 :
asize:=OT_BITS8;
OS_16,OS_S16 :
asize:=OT_BITS16;
OS_32,OS_S32,OS_F32 :
asize:=OT_BITS32;
OS_64,OS_S64:
begin
{ Only FPU operations know about 64bit values, for all
integer operations it is seen as 32bit
this applies only to i386, see tw16622}
if gas_needsuffix[opcode] in [attsufFPU,attsufFPUint] then
asize:=OT_BITS64
{$ifdef i386}
else
asize:=OT_BITS32
{$endif i386}
;
end;
OS_F64,OS_C64 :
asize:=OT_BITS64;
OS_F80 :
asize:=OT_BITS80;
end;
if asize<>0 then
ai.oper[i-1]^.ot:=(ai.oper[i-1]^.ot and not OT_SIZE_MASK) or asize;
end;
end;
end;
{ Condition ? }
if condition<>C_None then
ai.SetCondition(condition);
{ Set is_jmp, it enables asmwriter to emit short jumps if appropriate }
if (opcode=A_JMP) or (opcode=A_JCC) then
ai.is_jmp := True;
{ Concat the opcode or give an error }
if assigned(ai) then
p.concat(ai)
else
Message(asmr_e_invalid_opcode_and_operand);
result:=ai;
end;
end.
Reference in New Issue View Git Blame Copy Permalink