fpc/compiler/ncgmat.pas
Jonas Maebe e815b923d5 * a_loadfpu_* gets two size parameters: fromsize and tosize
* fixed downsizing the precision of floating point values
  * floating point constants are now treated using only the minimal
    precision required (e.g. 2.0 is now a single, 1.1 extended etc)
    (Delphi compatible)

git-svn-id: trunk@5927 -
2007-01-12 18:33:51 +00:00

489 lines
18 KiB
ObjectPascal

{
Copyright (c) 1998-2002 by Florian Klaempfl
Generate generic mathematical nodes
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
****************************************************************************
}
unit ncgmat;
{$i fpcdefs.inc}
interface
uses
node,nmat,cpubase,cgbase;
type
tcgunaryminusnode = class(tunaryminusnode)
protected
{ This routine is called to change the sign of the
floating point value in the floating point
register r.
This routine should be overriden, since
the generic version is not optimal at all. The
generic version assumes that floating
point values are stored in the register
in IEEE-754 format.
}
procedure emit_float_sign_change(r: tregister; _size : tcgsize);virtual;
{$ifdef SUPPORT_MMX}
procedure second_mmx;virtual;abstract;
{$endif SUPPORT_MMX}
{$ifndef cpu64bit}
procedure second_64bit;virtual;
{$endif cpu64bit}
procedure second_integer;virtual;
procedure second_float;virtual;
public
procedure pass_generate_code;override;
end;
tcgmoddivnode = class(tmoddivnode)
procedure pass_generate_code;override;
protected
{ This routine must do an actual 32-bit division, be it
signed or unsigned. The result must set into the the
@var(num) register.
@param(signed Indicates if the division must be signed)
@param(denum Register containing the denominator
@param(num Register containing the numerator, will also receive result)
The actual optimizations regarding shifts have already
been done and emitted, so this should really a do a divide.
}
procedure emit_div_reg_reg(signed: boolean;denum,num : tregister);virtual;abstract;
{ This routine must do an actual 32-bit modulo, be it
signed or unsigned. The result must set into the the
@var(num) register.
@param(signed Indicates if the modulo must be signed)
@param(denum Register containing the denominator
@param(num Register containing the numerator, will also receive result)
The actual optimizations regarding shifts have already
been done and emitted, so this should really a do a modulo.
}
procedure emit_mod_reg_reg(signed: boolean;denum,num : tregister);virtual;abstract;
{$ifndef cpu64bit}
{ This routine must do an actual 64-bit division, be it
signed or unsigned. The result must set into the the
@var(num) register.
@param(signed Indicates if the division must be signed)
@param(denum Register containing the denominator
@param(num Register containing the numerator, will also receive result)
The actual optimizations regarding shifts have already
been done and emitted, so this should really a do a divide.
Currently, this routine should only be implemented on
64-bit systems, otherwise a helper is called in 1st pass.
}
procedure emit64_div_reg_reg(signed: boolean;denum,num : tregister64);virtual;
{$endif cpu64bit}
end;
tcgshlshrnode = class(tshlshrnode)
{$ifndef cpu64bit}
procedure second_64bit;virtual;
{$endif cpu64bit}
procedure second_integer;virtual;
procedure pass_generate_code;override;
end;
tcgnotnode = class(tnotnode)
protected
procedure second_boolean;virtual;abstract;
{$ifdef SUPPORT_MMX}
procedure second_mmx;virtual;abstract;
{$endif SUPPORT_MMX}
{$ifndef cpu64bit}
procedure second_64bit;virtual;
{$endif cpu64bit}
procedure second_integer;virtual;
public
procedure pass_generate_code;override;
end;
implementation
uses
globtype,systems,
cutils,verbose,globals,
symconst,aasmbase,aasmtai,aasmdata,aasmcpu,defutil,
parabase,
pass_2,
ncon,
tgobj,ncgutil,cgobj,cgutils,paramgr
{$ifndef cpu64bit}
,cg64f32
{$endif cpu64bit}
;
{*****************************************************************************
TCGUNARYMINUSNODE
*****************************************************************************}
procedure tcgunaryminusnode.emit_float_sign_change(r: tregister; _size : tcgsize);
var
href,
href2 : treference;
begin
{ get a temporary memory reference to store the floating
point value
}
tg.gettemp(current_asmdata.CurrAsmList,tcgsize2size[_size],tt_normal,href);
{ store the floating point value in the temporary memory area }
cg.a_loadfpu_reg_ref(current_asmdata.CurrAsmList,_size,_size,r,href);
{ only single and double ieee are supported, for little endian
the signed bit is in the second dword }
href2:=href;
case _size of
OS_F64 :
if target_info.endian = endian_little then
inc(href2.offset,4);
OS_F32 :
;
else
internalerror(200406021);
end;
{ flip sign-bit (bit 31/63) of single/double }
cg.a_op_const_ref(current_asmdata.CurrAsmList,OP_XOR,OS_32,aint($80000000),href2);
cg.a_loadfpu_ref_reg(current_asmdata.CurrAsmList,_size,_size,href,r);
tg.ungetiftemp(current_asmdata.CurrAsmList,href);
end;
{$ifndef cpu64bit}
procedure tcgunaryminusnode.second_64bit;
begin
secondpass(left);
{ load left operator in a register }
location_copy(location,left.location);
location_force_reg(current_asmdata.CurrAsmList,location,OS_64,false);
cg64.a_op64_loc_reg(current_asmdata.CurrAsmList,OP_NEG,OS_64,
location,joinreg64(location.register64.reglo,location.register64.reghi));
end;
{$endif cpu64bit}
procedure tcgunaryminusnode.second_float;
begin
secondpass(left);
location_reset(location,LOC_FPUREGISTER,def_cgsize(resultdef));
case left.location.loc of
LOC_REFERENCE,
LOC_CREFERENCE :
begin
location.register:=cg.getfpuregister(current_asmdata.CurrAsmList,location.size);
cg.a_loadfpu_ref_reg(current_asmdata.CurrAsmList,
left.location.size,location.size,
left.location.reference,location.register);
emit_float_sign_change(location.register,def_cgsize(left.resultdef));
end;
LOC_FPUREGISTER:
begin
location.register:=left.location.register;
emit_float_sign_change(location.register,def_cgsize(left.resultdef));
end;
LOC_CFPUREGISTER:
begin
location.register:=cg.getfpuregister(current_asmdata.CurrAsmList,location.size);
cg.a_loadfpu_reg_reg(current_asmdata.CurrAsmList,left.location.size,location.size,left.location.register,location.register);
emit_float_sign_change(location.register,def_cgsize(left.resultdef));
end;
else
internalerror(200306021);
end;
end;
procedure tcgunaryminusnode.second_integer;
begin
secondpass(left);
{ load left operator in a register }
location_copy(location,left.location);
location_force_reg(current_asmdata.CurrAsmList,location,OS_SINT,false);
cg.a_op_reg_reg(current_asmdata.CurrAsmList,OP_NEG,OS_SINT,location.register,location.register);
end;
procedure tcgunaryminusnode.pass_generate_code;
begin
{$ifndef cpu64bit}
if is_64bit(left.resultdef) then
second_64bit
else
{$endif cpu64bit}
{$ifdef SUPPORT_MMX}
if (cs_mmx in current_settings.localswitches) and is_mmx_able_array(left.resultdef) then
second_mmx
else
{$endif SUPPORT_MMX}
if (left.resultdef.typ=floatdef) then
second_float
else
second_integer;
end;
{*****************************************************************************
TCGMODDIVNODE
*****************************************************************************}
{$ifndef cpu64bit}
procedure tcgmoddivnode.emit64_div_reg_reg(signed: boolean; denum,num:tregister64);
begin
{ handled in pass_1 already, unless pass_1 is
overriden
}
{ should be handled in pass_1 (JM) }
internalerror(200109052);
end;
{$endif cpu64bit}
procedure tcgmoddivnode.pass_generate_code;
var
hreg1 : tregister;
hdenom : tregister;
power : longint;
hl : tasmlabel;
paraloc1 : tcgpara;
opsize : tcgsize;
begin
secondpass(left);
if codegenerror then
exit;
secondpass(right);
if codegenerror then
exit;
location_copy(location,left.location);
{$ifndef cpu64bit}
if is_64bit(resultdef) then
begin
if is_signed(left.resultdef) then
opsize:=OS_S64
else
opsize:=OS_64;
{ this code valid for 64-bit cpu's only ,
otherwise helpers are called in pass_1
}
location_force_reg(current_asmdata.CurrAsmList,location,opsize,false);
location_copy(location,left.location);
location_force_reg(current_asmdata.CurrAsmList,right.location,opsize,false);
emit64_div_reg_reg(is_signed(left.resultdef),
joinreg64(right.location.register64.reglo,right.location.register64.reghi),
joinreg64(location.register64.reglo,location.register64.reghi));
end
else
{$endif cpu64bit}
begin
if is_signed(left.resultdef) then
opsize:=OS_SINT
else
opsize:=OS_INT;
{ put numerator in register }
location_force_reg(current_asmdata.CurrAsmList,left.location,opsize,false);
hreg1:=left.location.register;
if (nodetype=divn) and
(right.nodetype=ordconstn) and
ispowerof2(tordconstnode(right).value,power) then
Begin
{ for signed numbers, the numerator must be adjusted before the
shift instruction, but not wih unsigned numbers! Otherwise,
"Cardinal($ffffffff) div 16" overflows! (JM) }
If is_signed(left.resultdef) Then
Begin
current_asmdata.getjumplabel(hl);
cg.a_cmp_const_reg_label(current_asmdata.CurrAsmList,OS_INT,OC_GT,0,hreg1,hl);
if power=1 then
cg.a_op_const_reg(current_asmdata.CurrAsmList,OP_ADD,OS_INT,1,hreg1)
else
cg.a_op_const_reg(current_asmdata.CurrAsmList,OP_ADD,OS_INT,tordconstnode(right).value-1,hreg1);
cg.a_label(current_asmdata.CurrAsmList,hl);
cg.a_op_const_reg(current_asmdata.CurrAsmList,OP_SAR,OS_INT,power,hreg1);
End
Else { not signed }
cg.a_op_const_reg(current_asmdata.CurrAsmList,OP_SHR,OS_INT,power,hreg1);
End
else
begin
{ bring denominator to hdenom }
{ hdenom is always free, it's }
{ only used for temporary }
{ purposes }
hdenom := cg.getintregister(current_asmdata.CurrAsmList,OS_INT);
cg.a_load_loc_reg(current_asmdata.CurrAsmList,right.location.size,right.location,hdenom);
{ verify if the divisor is zero, if so return an error
immediately
}
current_asmdata.getjumplabel(hl);
cg.a_cmp_const_reg_label(current_asmdata.CurrAsmList,OS_INT,OC_NE,0,hdenom,hl);
paraloc1.init;
paramanager.getintparaloc(pocall_default,1,paraloc1);
paramanager.allocparaloc(current_asmdata.CurrAsmList,paraloc1);
cg.a_param_const(current_asmdata.CurrAsmList,OS_S32,200,paraloc1);
paramanager.freeparaloc(current_asmdata.CurrAsmList,paraloc1);
cg.a_call_name(current_asmdata.CurrAsmList,'FPC_HANDLEERROR');
paraloc1.done;
cg.a_label(current_asmdata.CurrAsmList,hl);
if nodetype = modn then
emit_mod_reg_reg(is_signed(left.resultdef),hdenom,hreg1)
else
emit_div_reg_reg(is_signed(left.resultdef),hdenom,hreg1);
end;
location_reset(location,LOC_REGISTER,opsize);
location.register:=hreg1;
end;
cg.g_overflowcheck(current_asmdata.CurrAsmList,location,resultdef);
end;
{*****************************************************************************
TCGSHLRSHRNODE
*****************************************************************************}
{$ifndef cpu64bit}
procedure tcgshlshrnode.second_64bit;
begin
{ already hanled in 1st pass }
internalerror(2002081501);
end;
{$endif cpu64bit}
procedure tcgshlshrnode.second_integer;
var
op : topcg;
hcountreg : tregister;
opsize : tcgsize;
begin
{ determine operator }
case nodetype of
shln: op:=OP_SHL;
shrn: op:=OP_SHR;
end;
{ load left operators in a register }
location_copy(location,left.location);
if is_signed(left.resultdef) then
opsize:=OS_SINT
else
opsize:=OS_INT;
location_force_reg(current_asmdata.CurrAsmList,location,opsize,false);
{ shifting by a constant directly coded: }
if (right.nodetype=ordconstn) then
begin
{ l shl 32 should 0 imho, but neither TP nor Delphi do it in this way (FK)
if right.value<=31 then
}
cg.a_op_const_reg(current_asmdata.CurrAsmList,op,location.size,
tordconstnode(right).value and 31,location.register);
{
else
emit_reg_reg(A_XOR,S_L,hregister1,
hregister1);
}
end
else
begin
{ load right operators in a register - this
is done since most target cpu which will use this
node do not support a shift count in a mem. location (cec)
}
if right.location.loc<>LOC_REGISTER then
begin
hcountreg:=cg.getintregister(current_asmdata.CurrAsmList,opsize);
cg.a_load_loc_reg(current_asmdata.CurrAsmList,right.location.size,right.location,hcountreg);
end
else
hcountreg:=right.location.register;
cg.a_op_reg_reg(current_asmdata.CurrAsmList,op,opsize,hcountreg,location.register);
end;
end;
procedure tcgshlshrnode.pass_generate_code;
begin
secondpass(left);
secondpass(right);
{$ifndef cpu64bit}
if is_64bit(left.resultdef) then
second_64bit
else
{$endif cpu64bit}
second_integer;
end;
{*****************************************************************************
TCGNOTNODE
*****************************************************************************}
{$ifndef cpu64bit}
procedure tcgnotnode.second_64bit;
begin
secondpass(left);
location_force_reg(current_asmdata.CurrAsmList,left.location,def_cgsize(left.resultdef),false);
location_copy(location,left.location);
{ perform the NOT operation }
cg64.a_op64_reg_reg(current_asmdata.CurrAsmList,OP_NOT,location.size,left.location.register64,location.register64);
end;
{$endif cpu64bit}
procedure tcgnotnode.second_integer;
begin
secondpass(left);
location_force_reg(current_asmdata.CurrAsmList,left.location,def_cgsize(left.resultdef),false);
location_copy(location,left.location);
{ perform the NOT operation }
cg.a_op_reg_reg(current_asmdata.CurrAsmList,OP_NOT,location.size,location.register,location.register);
end;
procedure tcgnotnode.pass_generate_code;
begin
if is_boolean(resultdef) then
second_boolean
{$ifdef SUPPORT_MMX}
else if (cs_mmx in current_settings.localswitches) and is_mmx_able_array(left.resultdef) then
second_mmx
{$endif SUPPORT_MMX}
{$ifndef cpu64bit}
else if is_64bit(left.resultdef) then
second_64bit
{$endif cpu64bit}
else
second_integer;
end;
begin
cmoddivnode:=tcgmoddivnode;
cunaryminusnode:=tcgunaryminusnode;
cshlshrnode:=tcgshlshrnode;
cnotnode:=tcgnotnode;
end.