paweld/fpc
1
0
Fork 0
mirror of https://gitlab.com/freepascal.org/fpc/source.git synced 2025-11-04 10:59:41 +01:00
Code Issues Packages Projects Releases Wiki Activity
f34e9e5adf
fpc/compiler/regvars.pas
peter 6a8d5eb25d * NEWRA branch merged
2003-09-03 15:55:00 +00:00

837 lines
32 KiB
ObjectPascal
Raw Blame History

{
$Id$
Copyright (c) 1998-2002 by Florian Klaempfl and Jonas Maebe
This unit handles register variable allocation
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
****************************************************************************
}
unit regvars;
{$i fpcdefs.inc}
interface
uses
aasmbase,aasmtai,aasmcpu,
node,
symsym,
cpubase, cginfo, tgobj, rgobj;
procedure assign_regvars(p: tnode);
procedure load_regvars(asml: TAAsmoutput; p: tnode);
procedure cleanup_regvars(asml: TAAsmoutput);
procedure store_regvar(asml: TAAsmoutput; reg: tregister);
procedure load_regvar(asml: TAAsmoutput; vsym: tvarsym);
procedure load_regvar_reg(asml: TAAsmoutput; reg: tregister);
procedure load_all_regvars(asml: TAAsmoutput);
procedure free_regvars(list: taasmoutput);
procedure translate_regvars(list: taasmoutput; const table:Ttranstable);
{$ifdef i386}
procedure sync_regvars_other(list1, list2: taasmoutput; const regvarsloaded1,
regvarsloaded2: regvarother_booleanarray);
procedure sync_regvars_int(list1, list2: taasmoutput; const regvarsloaded1,
regvarsloaded2: Tsuperregisterset);
{$endif i386}
implementation
uses
globtype,systems,comphook,
cutils,cclasses,verbose,globals,
psub,
symconst,symbase,symtype,symdef,paramgr,defutil,
cpuinfo,cgbase,cgobj,rgcpu;
procedure searchregvars(p : tnamedindexitem;arg:pointer);
var
i,j,k : longint;
parasym : boolean;
begin
parasym:=pboolean(arg)^;
if (tsym(p).typ=varsym) and (vo_regable in tvarsym(p).varoptions) then
begin
j:=tvarsym(p).refs;
{ parameter get a less value }
if parasym then
begin
if cs_littlesize in aktglobalswitches then
dec(j,1)
else
dec(j,100);
end;
{ walk through all momentary register variables }
for i:=1 to maxvarregs do
begin
with pregvarinfo(current_procinfo.procdef.regvarinfo)^ do
if ((regvars[i]=nil) or (j>regvars_refs[i])) and (j>0) then
begin
for k:=maxvarregs-1 downto i do
begin
regvars[k+1]:=regvars[k];
regvars_para[k+1]:=regvars_para[k];
regvars_refs[k+1]:=regvars_refs[k];
end;
{ calc the new refs
tvarsym(p).refs:=j; }
regvars[i]:=tvarsym(p);
regvars_para[i]:=parasym;
regvars_refs[i]:=j;
break;
end;
end;
end;
end;
procedure searchfpuregvars(p : tnamedindexitem;arg:pointer);
var
i,j,k : longint;
parasym : boolean;
begin
parasym:=pboolean(arg)^;
if (tsym(p).typ=varsym) and (vo_fpuregable in tvarsym(p).varoptions) then
begin
j:=tvarsym(p).refs;
{ parameter get a less value }
if parasym then
begin
if cs_littlesize in aktglobalswitches then
dec(j,1)
else
dec(j,100);
end;
{ walk through all momentary register variables }
for i:=1 to maxfpuvarregs do
begin
with pregvarinfo(current_procinfo.procdef.regvarinfo)^ do
if ((fpuregvars[i]=nil) or (j>fpuregvars_refs[i])) and (j>0) then
begin
for k:=maxfpuvarregs-1 downto i do
begin
fpuregvars[k+1]:=fpuregvars[k];
fpuregvars_para[k+1]:=fpuregvars_para[k];
fpuregvars_refs[k+1]:=fpuregvars_refs[k];
end;
{ calc the new refs
tvarsym(p).refs:=j; }
fpuregvars[i]:=tvarsym(p);
fpuregvars_para[i]:=parasym;
fpuregvars_refs[i]:=j;
break;
end;
end;
end;
end;
procedure assign_regvars(p: tnode);
{ register variables }
var
{$ifndef i386}
hp: tparaitem;
{$endif i386}
regvarinfo: pregvarinfo;
i: longint;
parasym : boolean;
siz : tcgsize;
begin
{ max. optimizations }
{ only if no asm is used }
{ and no try statement }
if (cs_regvars in aktglobalswitches) and
{$ifndef i386}
{ we have to store regvars back to memory in this case! }
(tcgprocinfo(current_procinfo).nestedprocs.count = 0) and
{$endif i386}
not(pi_uses_asm in current_procinfo.flags) and
not(pi_uses_exceptions in current_procinfo.flags) then
begin
new(regvarinfo);
fillchar(regvarinfo^,sizeof(regvarinfo^),0);
current_procinfo.procdef.regvarinfo := regvarinfo;
if (p.registers32<maxvarregs) then
begin
parasym:=false;
symtablestack.foreach_static({$ifdef FPCPROCVAR}@{$endif}searchregvars,@parasym);
{ copy parameter into a register ? }
parasym:=true;
symtablestack.next.foreach_static({$ifdef FPCPROCVAR}@{$endif}searchregvars,@parasym);
{ hold needed registers free }
for i:=maxvarregs downto maxvarregs-p.registers32+1-maxintscratchregs do
begin
regvarinfo^.regvars[i]:=nil;
regvarinfo^.regvars_para[i] := false;
end;
{ now assign register }
for i:=1 to maxvarregs-p.registers32-maxintscratchregs do
begin
if assigned(regvarinfo^.regvars[i]) and
{ currently we assume we can use volatile registers for all }
{ regvars if procedure does no call }
(not(pi_do_call in current_procinfo.flags) or
{ otherwise, demand some (arbitrary) minimum usage }
(regvarinfo^.regvars[i].refs > 100)) then
begin
{ register is no longer available for }
{ expressions }
{ search the register which is the most }
{ unused }
{ call by reference/const ? }
if (regvarinfo^.regvars[i].varspez in [vs_var,vs_out]) or
((regvarinfo^.regvars[i].varspez=vs_const) and
paramanager.push_addr_param(regvarinfo^.regvars[i].vartype.def,current_procinfo.procdef.proccalloption)) then
siz:=OS_32
else
if (regvarinfo^.regvars[i].vartype.def.deftype in [orddef,enumdef]) and
(regvarinfo^.regvars[i].vartype.def.size=1) then
siz:=OS_8
else
if (regvarinfo^.regvars[i].vartype.def.deftype in [orddef,enumdef]) and
(regvarinfo^.regvars[i].vartype.def.size=2) then
siz:=OS_16
else
siz:=OS_32;
{ allocate a register for this regvar }
regvarinfo^.regvars[i].reg:=rg.getregisterint(exprasmlist,siz);
{ and make sure it can't be freed }
rg.makeregvarint(getsupreg(regvarinfo^.regvars[i].reg));
end
else
begin
regvarinfo^.regvars[i] := nil;
regvarinfo^.regvars_para[i] := false;
end;
end;
end;
if ((p.registersfpu+1)<maxfpuvarregs) then
begin
parasym:=false;
symtablestack.foreach_static({$ifdef FPCPROCVAR}@{$endif}searchfpuregvars,@parasym);
{$ifdef dummy}
{ this code should be never enabled because }
{ 1. the caller loads parameters into registers }
{ 2. (later) the CSE loads a parameter into a }
{ register, if necessary }
{ (FK) }
{ copy parameter into a register ? }
parasym:=true;
symtablestack.next.foreach_static({$ifdef FPCPROCVAR}@{$endif}searchregvars);
{$endif dummy}
{ hold needed registers free }
{ in non leaf procedures we must be very careful }
{ with assigning registers }
if aktmaxfpuregisters=-1 then
begin
if (pi_do_call in current_procinfo.flags) then
begin
for i:=maxfpuvarregs downto 2 do
regvarinfo^.fpuregvars[i]:=nil;
end
else
begin
for i:=maxfpuvarregs downto maxfpuvarregs-p.registersfpu do
regvarinfo^.fpuregvars[i]:=nil;
end;
end
else
begin
for i:=aktmaxfpuregisters+1 to maxfpuvarregs do
regvarinfo^.fpuregvars[i]:=nil;
end;
{ now assign register }
for i:=1 to maxfpuvarregs do
begin
if assigned(regvarinfo^.fpuregvars[i]) then
begin
{$ifdef i386}
{ reserve place on the FPU stack }
regvarinfo^.fpuregvars[i].reg:=trgcpu(rg).correct_fpuregister(NR_ST0,i);
{$else i386}
regvarinfo^.fpuregvars[i].reg:=fpuvarregs[i];
rg.makeregvarother(regvarinfo^.fpuregvars[i].reg);
{$endif i386}
end;
end;
end;
end;
end;
procedure store_regvar(asml: TAAsmoutput; reg: tregister);
var
i: longint;
cgsize : tcgsize;
r : tregister;
hr: treference;
regvarinfo: pregvarinfo;
vsym: tvarsym;
regidx : tregisterindex;
supreg : tsuperregister;
begin
{$ifdef i386}
regvarinfo := pregvarinfo(current_procinfo.procdef.regvarinfo);
if not assigned(regvarinfo) then
exit;
if getregtype(reg)=R_INTREGISTER then
begin
supreg:=getsupreg(reg);
for i := 1 to maxvarregs do
if assigned(regvarinfo^.regvars[i]) and
(getsupreg(regvarinfo^.regvars[i].reg)=supreg) then
begin
if supreg in rg.regvar_loaded_int then
begin
vsym := tvarsym(regvarinfo^.regvars[i]);
{ we only have to store the regvar back to memory if it's }
{ possible that it's been modified (JM) }
if not(vsym.varspez in [vs_const,vs_var,vs_out]) then
begin
reference_reset_base(hr,current_procinfo.framepointer,vsym.adjusted_address);
cgsize:=def_cgsize(vsym.vartype.def);
cg.a_load_reg_ref(asml,cgsize,cgsize,vsym.reg,hr);
end;
asml.concat(tai_regalloc.dealloc(vsym.reg));
exclude(rg.regvar_loaded_int,supreg);
end;
break;
end;
end
else
begin
for i := 1 to maxvarregs do
if assigned(regvarinfo^.regvars[i]) then
begin
r:=rg.makeregsize(regvarinfo^.regvars[i].reg,OS_INT);
if (r = reg) then
begin
regidx:=findreg_by_number(r);
if rg.regvar_loaded_other[regidx] then
begin
vsym := tvarsym(regvarinfo^.regvars[i]);
{ we only have to store the regvar back to memory if it's }
{ possible that it's been modified (JM) }
if not(vsym.varspez in [vs_const,vs_var,vs_out]) then
begin
reference_reset_base(hr,current_procinfo.framepointer,vsym.adjusted_address);
cgsize:=def_cgsize(vsym.vartype.def);
cg.a_load_reg_ref(asml,cgsize,cgsize,vsym.reg,hr);
end;
asml.concat(tai_regalloc.dealloc(vsym.reg));
rg.regvar_loaded_other[regidx] := false;
end;
break;
end;
end;
end;
{$endif i386}
end;
procedure load_regvar(asml: TAAsmoutput; vsym: tvarsym);
var
hr: treference;
opsize: tcgsize;
r,
reg : tregister;
regidx : tregisterindex;
begin
{$ifndef i386}
exit;
{$endif i386}
reg:=vsym.reg;
if getregtype(reg)=R_INTREGISTER then
begin
if not(getsupreg(reg) in rg.regvar_loaded_int) then
begin
asml.concat(tai_regalloc.alloc(reg));
reference_reset_base(hr,current_procinfo.framepointer,vsym.adjusted_address);
if (vsym.varspez in [vs_var,vs_out]) or
((vsym.varspez=vs_const) and
paramanager.push_addr_param(vsym.vartype.def,current_procinfo.procdef.proccalloption)) then
opsize := OS_ADDR
else
opsize := def_cgsize(vsym.vartype.def);
cg.a_load_ref_reg(asml,opsize,opsize,hr,reg);
include(rg.regvar_loaded_int,getsupreg(reg));
end;
end
else
begin
r:=rg.makeregsize(reg,OS_INT);
regidx:=findreg_by_number(r);
if not rg.regvar_loaded_other[regidx] then
begin
asml.concat(tai_regalloc.alloc(reg));
reference_reset_base(hr,current_procinfo.framepointer,vsym.adjusted_address);
if (vsym.varspez in [vs_var,vs_out]) or
((vsym.varspez=vs_const) and
paramanager.push_addr_param(vsym.vartype.def,current_procinfo.procdef.proccalloption)) then
opsize := OS_ADDR
else
opsize := def_cgsize(vsym.vartype.def);
cg.a_load_ref_reg(asml,opsize,opsize,hr,reg);
rg.regvar_loaded_other[regidx] := true;
end;
end;
end;
procedure load_regvar_reg(asml: TAAsmoutput; reg: tregister);
var
i: longint;
regvarinfo: pregvarinfo;
reg_spare : tregister;
supreg : tsuperregister;
begin
regvarinfo := pregvarinfo(current_procinfo.procdef.regvarinfo);
if not assigned(regvarinfo) then
exit;
if getregtype(reg)=R_INTREGISTER then
begin
supreg:=getsupreg(reg);
for i := 1 to maxvarregs do
if assigned(regvarinfo^.regvars[i]) and
(getsupreg(regvarinfo^.regvars[i].reg) = supreg) then
load_regvar(asml,tvarsym(regvarinfo^.regvars[i]))
end
else
begin
reg_spare := rg.makeregsize(reg,OS_INT);
for i := 1 to maxvarregs do
if assigned(regvarinfo^.regvars[i]) and
(rg.makeregsize(regvarinfo^.regvars[i].reg,OS_INT) = reg_spare) then
load_regvar(asml,tvarsym(regvarinfo^.regvars[i]))
end;
end;
procedure load_all_regvars(asml: TAAsmoutput);
var
i: longint;
regvarinfo: pregvarinfo;
begin
regvarinfo := pregvarinfo(current_procinfo.procdef.regvarinfo);
if not assigned(regvarinfo) then
exit;
for i := 1 to maxvarregs do
if assigned(regvarinfo^.regvars[i]) then
load_regvar(asml,tvarsym(regvarinfo^.regvars[i]))
end;
procedure load_regvars(asml: TAAsmoutput; p: tnode);
var
i: longint;
regvarinfo: pregvarinfo;
begin
if (cs_regvars in aktglobalswitches) and
not(pi_uses_asm in current_procinfo.flags) and
not(pi_uses_exceptions in current_procinfo.flags) then
begin
regvarinfo := pregvarinfo(current_procinfo.procdef.regvarinfo);
{ can happen when inlining assembler procedures (JM) }
if not assigned(regvarinfo) then
exit;
for i:=1 to maxfpuvarregs do
begin
if assigned(regvarinfo^.fpuregvars[i]) then
begin
{$ifdef i386}
{ reserve place on the FPU stack }
regvarinfo^.fpuregvars[i].reg:=trgcpu(rg).correct_fpuregister(NR_ST0,i-1);
asml.concat(Taicpu.op_none(A_FLDZ,S_NO));
{$endif i386}
end;
end;
{$ifdef i386}
if assigned(p) then
if cs_asm_source in aktglobalswitches then
asml.insert(tai_comment.Create(strpnew(tostr(p.registersfpu)+
' registers on FPU stack used by temp. expressions')));
{$endif i386}
for i:=1 to maxfpuvarregs do
begin
if assigned(regvarinfo^.fpuregvars[i]) then
begin
if cs_asm_source in aktglobalswitches then
asml.insert(tai_comment.Create(strpnew(regvarinfo^.fpuregvars[i].name+
' with weight '+tostr(regvarinfo^.fpuregvars[i].refs)+' assigned to register '+
std_regname(regvarinfo^.fpuregvars[i].reg))));
if (status.verbosity and v_debug)=v_debug then
Message3(cg_d_register_weight,std_regname(regvarinfo^.fpuregvars[i].reg),
tostr(regvarinfo^.fpuregvars[i].refs),regvarinfo^.fpuregvars[i].name);
end;
end;
if cs_asm_source in aktglobalswitches then
asml.insert(tai_comment.Create(strpnew('Register variable assignment:')));
end;
end;
{$ifdef i386}
procedure sync_regvars_other(list1, list2: taasmoutput; const regvarsloaded1,
regvarsloaded2: regvarother_booleanarray);
var
counter: tregisterindex;
begin
for counter := low(rg.regvar_loaded_other) to high(rg.regvar_loaded_other) do
begin
rg.regvar_loaded_other[counter] := regvarsloaded1[counter] and
regvarsloaded2[counter];
if regvarsloaded1[counter] xor regvarsloaded2[counter] then
if regvarsloaded1[counter] then
load_regvar_reg(list2,counter)
else
load_regvar_reg(list1,counter);
end;
end;
procedure sync_regvars_int(list1, list2: taasmoutput; const regvarsloaded1,
regvarsloaded2: Tsuperregisterset);
var
i : longint;
r : tregister;
begin
for i:=1 to maxvarregs do
begin
r:=newreg(R_INTREGISTER,varregs[i],R_SUBWHOLE);
if (varregs[i] in regvarsloaded1) and
not(varregs[i] in regvarsloaded2) then
load_regvar_reg(list2,r)
else
if (varregs[i] in regvarsloaded2) and
not(varregs[i] in regvarsloaded1) then
load_regvar_reg(list1,r);
end;
end;
{$endif i386}
procedure cleanup_regvars(asml: TAAsmoutput);
var
i: longint;
reg : tregister;
regidx : tregisterindex;
begin
{ can happen when inlining assembler procedures (JM) }
if not assigned(current_procinfo.procdef.regvarinfo) then
exit;
if (cs_regvars in aktglobalswitches) and
not(pi_uses_asm in current_procinfo.flags) and
not(pi_uses_exceptions in current_procinfo.flags) then
with pregvarinfo(current_procinfo.procdef.regvarinfo)^ do
begin
{$ifdef i386}
for i:=1 to maxfpuvarregs do
if assigned(fpuregvars[i]) then
{ ... and clean it up }
asml.concat(Taicpu.op_reg(A_FSTP,S_NO,NR_ST0));
{$endif i386}
for i := 1 to maxvarregs do
begin
if assigned(regvars[i]) then
begin
reg:=regvars[i].reg;
if getregtype(reg)=R_INTREGISTER then
begin
end
else
begin
setsubreg(reg,cgsize2subreg(OS_INT));
regidx:=findreg_by_number(reg);
if (rg.regvar_loaded_other[regidx]) then
asml.concat(tai_regalloc.dealloc(reg));
end;
end;
end;
end;
end;
procedure free_regvars(list: taasmoutput);
var
i: longint;
begin
if not assigned(current_procinfo.procdef.regvarinfo) then
exit;
with pregvarinfo(current_procinfo.procdef.regvarinfo)^ do
for i := 1 to maxvarregs do
if assigned(regvars[i]) { and
(regvars[i] <> tvarsym(current_procinfo.procdef.funcretsym))} then
begin
{ make sure the unget isn't just a nop }
exclude(rg.is_reg_var_int,getsupreg(regvars[i].reg));
rg.ungetregisterint(list,regvars[i].reg);
end;
end;
procedure translate_regvars(list: taasmoutput; const table:Ttranstable);
var
i: longint;
r: tregister;
begin
if not assigned(current_procinfo.procdef.regvarinfo) then
exit;
with pregvarinfo(current_procinfo.procdef.regvarinfo)^ do
for i := 1 to maxvarregs do
if assigned(regvars[i]) { and
(regvars[i] <> tvarsym(current_procinfo.procdef.funcretsym))} then
begin
setsupreg(regvars[i].reg,getsupreg(table[getsupreg(regvars[i].reg)]));
r:=regvars[i].reg;
if cs_asm_source in aktglobalswitches then
list.insert(tai_comment.Create(strpnew(regvars[i].name+
' with weight '+tostr(regvars[i].refs)+' assigned to register '+
std_regname(r))));
Message3(cg_d_register_weight,std_regname(r),
tostr(regvars[i].refs),regvars[i].name);
end;
end;
end.
{
$Log$
Revision 1.63 2003-09-03 15:55:01 peter
* NEWRA branch merged
Revision 1.62.2.2 2003/08/29 17:28:59 peter
* next batch of updates
Revision 1.62.2.1 2003/08/28 18:35:08 peter
* tregister changed to cardinal
Revision 1.62 2003/08/17 20:47:47 daniel
* Notranslation changed into -sr functionality
Revision 1.61 2003/08/17 16:59:20 jonas
* fixed regvars so they work with newra (at least for ppc)
* fixed some volatile register bugs
+ -dnotranslation option for -dnewra, which causes the registers not to
be translated from virtual to normal registers. Requires support in
the assembler writer as well, which is only implemented in aggas/
agppcgas currently
Revision 1.60 2003/08/11 21:18:20 peter
* start of sparc support for newra
Revision 1.59 2003/08/09 18:56:54 daniel
* cs_regalloc renamed to cs_regvars to avoid confusion with register
allocator
* Some preventive changes to i386 spillinh code
Revision 1.58 2003/07/02 22:18:04 peter
* paraloc splitted in callerparaloc,calleeparaloc
* sparc calling convention updates
Revision 1.57 2003/06/13 21:19:31 peter
* current_procdef removed, use current_procinfo.procdef instead
Revision 1.56 2003/06/07 18:57:04 jonas
+ added freeintparaloc
* ppc get/freeintparaloc now check whether the parameter regs are
properly allocated/deallocated (and get an extra list para)
* ppc a_call_* now internalerrors if pi_do_call is not yet set
* fixed lot of missing pi_do_call's
Revision 1.55 2003/06/03 21:11:09 peter
* cg.a_load_* get a from and to size specifier
* makeregsize only accepts newregister
* i386 uses generic tcgnotnode,tcgunaryminus
Revision 1.54 2003/06/03 13:01:59 daniel
* Register allocator finished
Revision 1.53 2003/05/31 20:33:57 jonas
* temp fix/hack for nested procedures (disable regvars in all procedures
that have nested procedures)
* leave register parameters in their own register (instead of storing
them to memory or assigning them to another register) if the current
procedure doesn't call any other procedures
Revision 1.52 2003/05/30 18:55:21 jonas
* fixed several regvar related bugs for non-i386. make cycle with -Or now
works for ppc
Revision 1.51 2003/05/23 14:27:35 peter
* remove some unit dependencies
* current_procinfo changes to store more info
Revision 1.50 2003/05/16 14:33:31 peter
* regvar fixes
Revision 1.49 2003/05/15 18:58:53 peter
* removed selfpointer_offset, vmtpointer_offset
* tvarsym.adjusted_address
* address in localsymtable is now in the real direction
* removed some obsolete globals
Revision 1.48 2003/05/12 17:22:00 jonas
* fixed (last?) remaining -tvarsym(X).address to
tg.direction*tvarsym(X).address...
Revision 1.47 2003/04/27 11:21:34 peter
* aktprocdef renamed to current_procinfo.procdef
* procinfo renamed to current_procinfo
* procinfo will now be stored in current_module so it can be
cleaned up properly
* gen_main_procsym changed to create_main_proc and release_main_proc
to also generate a tprocinfo structure
* fixed unit implicit initfinal
Revision 1.46 2003/03/28 19:16:57 peter
* generic constructor working for i386
* remove fixed self register
* esi added as address register for i386
Revision 1.45 2003/02/19 22:00:14 daniel
* Code generator converted to new register notation
- Horribily outdated todo.txt removed
Revision 1.44 2003/01/08 18:43:57 daniel
* Tregister changed into a record
Revision 1.43 2002/11/25 17:43:24 peter
* splitted defbase in defutil,symutil,defcmp
* merged isconvertable and is_equal into compare_defs(_ext)
* made operator search faster by walking the list only once
Revision 1.42 2002/11/18 17:31:59 peter
* pass proccalloption to ret_in_xxx and push_xxx functions
Revision 1.41 2002/08/25 19:25:20 peter
* sym.insert_in_data removed
* symtable.insertvardata/insertconstdata added
* removed insert_in_data call from symtable.insert, it needs to be
called separatly. This allows to deref the address calculation
* procedures now calculate the parast addresses after the procedure
directives are parsed. This fixes the cdecl parast problem
* push_addr_param has an extra argument that specifies if cdecl is used
or not
Revision 1.40 2002/08/18 20:06:25 peter
* inlining is now also allowed in interface
* renamed write/load to ppuwrite/ppuload
* tnode storing in ppu
* nld,ncon,nbas are already updated for storing in ppu
Revision 1.39 2002/08/17 09:23:41 florian
* first part of procinfo rewrite
Revision 1.38 2002/08/06 20:55:22 florian
* first part of ppc calling conventions fix
Revision 1.37 2002/07/20 11:57:57 florian
* types.pas renamed to defbase.pas because D6 contains a types
unit so this would conflicts if D6 programms are compiled
+ Willamette/SSE2 instructions to assembler added
Revision 1.36 2002/07/11 14:41:30 florian
* start of the new generic parameter handling
Revision 1.35 2002/07/01 18:46:25 peter
* internal linker
* reorganized aasm layer
Revision 1.34 2002/06/24 12:43:00 jonas
* fixed errors found with new -CR code from Peter when cycling with -O2p3r
Revision 1.33 2002/05/18 13:34:17 peter
* readded missing revisions
Revision 1.32 2002/05/16 19:46:44 carl
+ defines.inc -> fpcdefs.inc to avoid conflicts if compiling by hand
+ try to fix temp allocation (still in ifdef)
+ generic constructor calls
+ start of tassembler / tmodulebase class cleanup
Revision 1.30 2002/05/12 16:53:10 peter
* moved entry and exitcode to ncgutil and cgobj
* foreach gets extra argument for passing local data to the
iterator function
* -CR checks also class typecasts at runtime by changing them
into as
* fixed compiler to cycle with the -CR option
* fixed stabs with elf writer, finally the global variables can
be watched
* removed a lot of routines from cga unit and replaced them by
calls to cgobj
* u32bit-s32bit updates for and,or,xor nodes. When one element is
u32bit then the other is typecasted also to u32bit without giving
a rangecheck warning/error.
* fixed pascal calling method with reversing also the high tree in
the parast, detected by tcalcst3 test
Revision 1.29 2002/04/21 15:23:34 carl
+ changeregsize -> makeregsize
Revision 1.28 2002/04/19 15:46:03 peter
* mangledname rewrite, tprocdef.mangledname is now created dynamicly
in most cases and not written to the ppu
* add mangeledname_prefix() routine to generate the prefix of
manglednames depending on the current procedure, object and module
* removed static procprefix since the mangledname is now build only
on demand from tprocdef.mangledname
Revision 1.27 2002/04/15 19:44:19 peter
* fixed stackcheck that would be called recursively when a stack
error was found
* generic changeregsize(reg,size) for i386 register resizing
* removed some more routines from cga unit
* fixed returnvalue handling
* fixed default stacksize of linux and go32v2, 8kb was a bit small :-)
Revision 1.26 2002/04/15 19:04:04 carl
+ reg2str -> std_reg2str()
Revision 1.25 2002/04/06 18:13:01 jonas
* several powerpc-related additions and fixes
Revision 1.24 2002/04/02 17:11:29 peter
* tlocation,treference update
* LOC_CONSTANT added for better constant handling
* secondadd splitted in multiple routines
* location_force_reg added for loading a location to a register
of a specified size
* secondassignment parses now first the right and then the left node
(this is compatible with Kylix). This saves a lot of push/pop especially
with string operations
* adapted some routines to use the new cg methods
Revision 1.23 2002/03/31 20:26:36 jonas
+ a_loadfpu_* and a_loadmm_* methods in tcg
* register allocation is now handled by a class and is mostly processor
independent (+rgobj.pas and i386/rgcpu.pas)
* temp allocation is now handled by a class (+tgobj.pas, -i386\tgcpu.pas)
* some small improvements and fixes to the optimizer
* some register allocation fixes
* some fpuvaroffset fixes in the unary minus node
* push/popusedregisters is now called rg.save/restoreusedregisters and
(for i386) uses temps instead of push/pop's when using -Op3 (that code is
also better optimizable)
* fixed and optimized register saving/restoring for new/dispose nodes
* LOC_FPU locations now also require their "register" field to be set to
R_ST, not R_ST0 (the latter is used for LOC_CFPUREGISTER locations only)
- list field removed of the tnode class because it's not used currently
and can cause hard-to-find bugs
}
Reference in New Issue View Git Blame Copy Permalink