unit FileConverter;

{(*}
(*------------------------------------------------------------------------------
 Delphi Code formatter source code

The Original Code is Converter.pas, released January 2001.
The Initial Developer of the Original Code is Anthony Steele.
Portions created by Anthony Steele are Copyright (C) 1999-2008 Anthony Steele.
All Rights Reserved. 
Contributor(s): Anthony Steele.

The contents of this file are subject to the Mozilla Public License Version 1.1
(the "License"). you may not use this file except in compliance with the License.
You may obtain a copy of the License at http://www.mozilla.org/NPL/

Software distributed under the License is distributed on an "AS IS" basis,
WITHOUT WARRANTY OF ANY KIND, either express or implied.
See the License for the specific language governing rights and limitations
under the License.

Alternatively, the contents of this file may be used under the terms of
the GNU General Public License Version 2 or later (the "GPL") 
See http://www.gnu.org/licenses/gpl.html
------------------------------------------------------------------------------*)
{*)}

{$I JcfGlobal.inc}

interface

uses
  { delphi } Classes,
  { local } Converter, 
  ConvertTypes;

{ AFS 7 July 04
  rewrote this as a wrapper for the string->string converter
  So basically it deals with file issues
  and delegates the convertion to the wrapped TConverter
}


type

  TFileConverter = class(TObject)
  private
    { the string-> string converter }
    fcConverter: TConverter;

    { state }
    fOnStatusMessage: TStatusMessageProc;
    peBackupMode: TBackupMode;
    peSourceMode: TSourceMode;

    { properties }
    fsInput: string;
    fsOriginalFileName: string;
    fsOutFileName: string;
    fbYesAll: boolean;
    fbGuiMessages: Boolean;
    fbAbort: boolean;
    fiConvertCount: integer;

    procedure SendStatusMessage(const psUnit, psMessage: string;
      const peMessageType: TStatusMessageType;
      const piY, piX: integer);

    procedure GetFileNames(const psDir: string; psFiles: TStrings);
    procedure GetDirNames(const psDir: string; psFiles: TStrings);

    function GetOnStatusMessage: TStatusMessageProc;
    procedure SetOnStatusMessage(const Value: TStatusMessageProc);
    procedure FinalSummary;

    function PreProcessChecks(const psInputFileName: string): boolean;

  protected
    function OriginalFileName: string;

    procedure ProcessDirectory(const psDir: string);

  public
    constructor Create;
    destructor Destroy; override;

    procedure ProcessFile(const psInputFileName: string);

    procedure Convert;
    procedure Clear;

    function ConvertError: Boolean;
    function TokenCount: integer;



    property BackupMode: TBackupMode Read peBackupMode Write peBackupMode;
    property SourceMode: TSourceMode Read peSourceMode Write peSourceMode;
    property Input: string Read fsInput Write fsInput;

    property YesAll: boolean read fbYesAll write fbYesAll;
    property GuiMessages: Boolean read fbGuiMessages write fbGuiMessages;

    property Abort: boolean read fbAbort write fbAbort;

    // details of the last file converted
    property OutFileName: string Read fsOutFileName;

    property OnStatusMessage: TStatusMessageProc read GetOnStatusMessage write SetOnStatusMessage;
  end;

implementation

uses
  { delphi }
  {$ifndef fpc}Windows, {$endif} SysUtils, Dialogs, Controls, Forms,
  { local }
  JcfStringUtils,
  FileUtils, JcfMiscFunctions, JcfLog,
  JcfRegistrySettings, JcfSettings, JcfUnicodeFiles;

constructor TFileConverter.Create;
begin
  inherited;
  fcConverter := TConverter.Create;
  fcConverter.OnStatusMessage := SendStatusMessage;
end;

destructor TFileConverter.Destroy;
begin
  FreeAndNil(fcConverter);
  inherited;
end;

function TFileConverter.PreProcessChecks(const psInputFileName: string): boolean;
var
  lsTemp: string;
begin
  Result := False;

  if psInputFileName = '' then
  begin
    SendStatusMessage('', 'Select a file', mtInputError, -1, -1);
    exit;
  end;

  if not FileExists(psInputFileName) then
  begin
    SendStatusMessage(psInputFileName,
      'The file "' + psInputFileName + '" does not exist',
      mtInputError, -1, -1);
    exit;
  end;

  if FileGetSize(psInputFileName) < 1 then
  begin
    SendStatusMessage(psInputFileName, 'The file "' + psInputFileName + '" is empty',
      mtInputError,
      -1, -1);
    exit;
  end;

  if (SourceMode <> fmSingleFile) then
  begin
    lsTemp := PathExtractFileNameNoExt(psInputFileName);

    if GetRegSettings.FileIsExcluded(lsTemp) then
    begin
      Log.Write('Exluded file: ' + psInputFileName);
      exit;
    end;
  end;

  { all kinds of chaos ensues if you work with readonly files,
    for e.g. you can rename them to .bak, but on the next run you will be unable to delete the old .bak files.
    They are only safe when the source is read not written, ie "output to seperate file" backup mode
  }
  if (BackupMode <> cmSeperateOutput) and (FileIsReadOnly(psInputFileName)) then
  begin
    Log.WriteError('File: ' + psInputFileName + ' cannot be processed as it is read only');
    exit;
  end;

  result := True;
end;

procedure TFileConverter.ProcessFile(const psInputFileName: string);
var
  lsMessage, lsOut: string;
  wRes: word;
  lbFileIsChanged: boolean;
  lsOutType: string;
  lsSourceCode: WideString;
  leContentType: TFileContentType;
begin
  // do checks
  if not PreProcessChecks(psInputFileName) then
    exit;

  // notify owner
  lsMessage := 'Formatting file ' + psInputFileName;

  if GetRegSettings.LogLevel in [eLogFiles, eLogTokens] then
    Log.Write(lsMessage);
  SendStatusMessage(psInputFileName, lsMessage, mtProgress, -1, -1);

  // convert in memory
  fsOriginalFileName := psInputFileName;

  ReadTextFile(psInputFileName, lsSourceCode, leContentType);

  fcConverter.FileName := psInputFileName;
  fcConverter.InputCode := lsSourceCode;
  fcConverter.GuiMessages := GuiMessages;
  fcConverter.Convert;

  // was it converted ?
  if ConvertError then
    exit;

  Inc(fiConvertCount);

  {
   check if the file has changed.
   If not, do not write.
   This is kinder to source control systems (CVS, SVN etc.)
   that check the file timestamp
  }
  lbFileIsChanged := (fcConverter.InputCode <> fcConverter.OutputCode);

  lsOut := GetRegSettings.GetOutputFileName(psInputFileName, peBackupMode);

  // check if an output/backup file must be removed 
  if BackupMode <> cmInplace then
  begin
    if lsOut = '' then
    begin
      SendStatusMessage(psInputFileName, 'No output/backup file specifed',
       mtInputError, -1, -1);
      exit;
    end;

    if lbFileIsChanged and FileExists(lsOut) then
    begin
      if YesAll then
        wRes := mrYes
      else
      begin
        if BackupMode = cmInPlaceWithBackup then
          lsOutType := 'Backup'
        else
          lsOutType := 'Output';
          
        wRes := MessageDlg(lsOutType + ' file ' + lsOut + ' exists already. Remove it?',
          mtConfirmation, [mbYes, mbNo, mbAll, mbAbort], 0);
      end;

      if wRes = mrAll then
      begin
        YesAll := True;
        wRes   := mrYes;
      end;

      if wRes = mrYes then
      begin
        if not DeleteFile(lsOut) then
          raise Exception.Create('TFileConverter.ProcessFile: ' +
            'Failed to delete ' + lsOutType + ' file ' + lsOut);
      end
      else if wRes = mrNo then
      begin
        exit;
      end
      else if wRes = mrAbort then
      begin
        fbAbort := True;
        exit;
      end;
    end;
  end;

  // now, depending on mode, write the output to new/old file 
  case BackupMode of
    cmInPlace:
    begin
      fsOutFileName := psInputFileName;

      if lbFileIsChanged then
      begin
        // delete the old one, write the new one
        DeleteFile(psInputFileName);
        WriteTextFile(psInputFileName, fcConverter.OutputCode, leContentType);
      end;
    end;

    cmInPlaceWithBackup:
    begin
      fsOutFileName := psInputFileName;

      if lbFileIsChanged then
      begin

        { rename the original file to the backup file name,
          write processed code back to the original file }
        if not RenameFile(psInputFileName, lsOut) then
        begin
          raise Exception.Create('TFileConverter.ProcessFile: ' +
          ' could not rename source file ' + psInputFileName + ' to ' + lsOut);
        end;

        WriteTextFile(psInputFileName, fcConverter.OutputCode, leContentType);
      end;
    end;

    cmSeperateOutput:
    begin
      fsOutFileName := lsOut;
      { simple. Write to a new file
        doesn't matter if it;s not changed }
      WriteTextFile(lsOut, fcConverter.OutputCode, leContentType);

    end;
    else
      Assert(False, 'Bad backup mode');
  end;

end;

procedure TFileConverter.ProcessDirectory(const psDir: string);
var
  lsMessage: string;
  lsNames:   TStringList;
  lsDir:     string;
  liLoop:    integer;
begin
  if not DirectoryExists(psDir) then
  begin
    SendStatusMessage('', 'The directory ' + psDir + ' does not exist',
      mtInputError, -1, -1);
    exit;
  end;

  if GetRegSettings.DirIsExcluded(GetLastDir(psDir)) then
  begin
    Log.Write('Exluded dir: ' + psDir);
    exit;
  end;

  lsDir := IncludeTrailingPathDelimiter(psDir);

  lsMessage := 'Processing directory ' + lsDir;
  //if Settings.Log.LogLevel in [eLogFiles, eLogTokens] then
  Log.Write(lsMessage);
  SendStatusMessage('', lsMessage, mtProgress, -1, -1);

  lsNames := TStringList.Create;
  try { finally free }
    GetFileNames(lsDir, lsNames);

    for liLoop := 0 to lsNames.Count - 1 do
    begin
      ProcessFile(lsDir + lsNames[liLoop]);
      if fbAbort then
        break;

      // refresh the GUI
      Application.ProcessMessages;
    end;

    { all subdirs }
    if SourceMode = fmDirectoryRecursive then
    begin
      lsNames.Clear;
      GetDirNames(lsDir, lsNames);

      for liLoop := 0 to lsNames.Count - 1 do
      begin
        ProcessDirectory(lsDir + lsNames[liLoop]);
        if fbAbort then
          break;
      end;
    end;

  finally
    lsNames.Free;
  end;
end;

procedure TFileConverter.GetFileNames(const psDir: string; psFiles: TStrings);
var
  rSearch: TSearchRec;
  lsName, lsExt, lsSearch: string;
  bDone:   boolean;
begin
  Assert(psDir <> '');
  Assert(psFiles <> nil);

  { for all pas files in the dir }
  lsSearch := psDir + '*.*';
  FillChar(rSearch, Sizeof(TSearchRec), 0);
  bDone := (FindFirst(lsSearch, 0, rSearch) <> 0);

  while not bDone do
  begin
    lsName := rSearch.Name;
    Assert(lsName <> '');
    if (rSearch.Attr and faDirectory > 0) then
      continue;

    lsExt := ExtractFileExt(lsName);
    if FormatSettings.Clarify.ExtensionIsFormatted(lsExt) then
      psFiles.Add(lsName);

    bDone := (FindNext(rSearch) <> 0);
    Assert(bDone or (rSearch.Name <> lsName));
  end;
  FindClose(rSearch);
end;

procedure TFileConverter.GetDirNames(const psDir: string; psFiles: TStrings);
var
  rSearch:  TSearchRec;
  lsSearch: string;
  bDone:    boolean;
begin
  Assert(psDir <> '');
  Assert(psFiles <> nil);

  lsSearch := psDir + '*.*';
  FillChar(rSearch, Sizeof(TSearchRec), 0);
  bDone := (FindFirst(lsSearch, faDirectory, rSearch) <> 0);

  while not bDone do
  begin
    if (rSearch.Attr and faDirectory > 0) and
      (rSearch.Name <> '.') and (rSearch.Name <> '..') then
      psFiles.Add(rSearch.Name);

    bDone := (FindNext(rSearch) <> 0);
  end;
  FindClose(rSearch);
end;


procedure TFileConverter.Convert;
var
  dwStart, dwElapsed: DWord;
begin
  if GetRegSettings.LogTime then
    dwStart := GetTickCount
  else
    dwStart := 0;

  fbAbort := False;
  fiConvertCount := 0;

  { all processors must check thier inclusion settings
    as this may have changed from the UI }

  { process file(s) }
  case SourceMode of
    fmSingleFile:
      ProcessFile(Input);
    fmDirectory, fmDirectoryRecursive:
    begin
      ProcessDirectory(Input);
    end
    else
      raise Exception.Create('TConverter.Convert: Bad file recurse type');
  end;

  if GetRegSettings.LogTime then
  begin
    dwElapsed := GetTickCount - dwStart;
    Log.Write('Run took ' + FloatToStr(dwElapsed / 1000) + ' seconds')
  end;

  FinalSummary;
  Log.CloseLog;

  if GetRegSettings.ViewLogAfterRun then
    GetRegSettings.ViewLog;
end;

function TFileConverter.OriginalFileName: string;
begin
  Result := fsOriginalFileName;
end;


procedure TFileConverter.FinalSummary;
var
  lsMessage: string;
begin
  if fiConvertCount = 0 then
  begin
    if ConvertError then
      lsMessage := 'Aborted due to error'
    else
      lsMessage := 'Nothing done';
  end
  else if fbAbort then
    lsMessage := 'Aborted after ' + DescribeFileCount(fiConvertCount)
  else if fiConvertCount > 1 then
    lsMessage := 'Finished processing ' + DescribeFileCount(fiConvertCount)
  else
    lsMessage := '';

  if lsMessage <> '' then
  begin
    SendStatusMessage('', lsMessage, mtProgress, -1, -1);

    Log.EmptyLine;
    Log.Write(lsMessage);
  end;
end;

procedure TFileConverter.Clear;
begin
  fcConverter.Clear;
end;


function TFileConverter.ConvertError: Boolean;
begin
  Result := fcConverter.ConvertError;
end;


function TFileConverter.TokenCount: integer;
begin
  Result := fcConverter.TokenCount;
end;

function TFileConverter.GetOnStatusMessage: TStatusMessageProc;
begin
  Result := fOnStatusMessage;
end;

procedure TFileConverter.SetOnStatusMessage(const Value: TStatusMessageProc);
begin
  fOnStatusMessage := Value;
end;

procedure TFileConverter.SendStatusMessage(const psUnit, psMessage: string;
  const peMessageType: TStatusMessageType;
  const piY, piX: integer);
var
  lsUnit: string;
begin
  if Assigned(fOnStatusMessage) then
  begin
    lsUnit := psUnit;
    if lsUnit = '' then
      lsUnit := OriginalFileName;

    fOnStatusMessage(lsUnit, psMessage, peMessageType, piY, piX);
  end;
end;

end.