{
 /***************************************************************************
                          lazarusidestrconsts.pas
                          -----------------------
              This unit contains all resource strings of the IDE


 ***************************************************************************/

 ***************************************************************************
 *                                                                         *
 *   This source is free software; you can redistribute it and/or modify   *
 *   it under the terms of the GNU General Public License as published by  *
 *   the Free Software Foundation; either version 2 of the License, or     *
 *   (at your option) any later version.                                   *
 *                                                                         *
 *   This code is distributed in the hope that it will be useful, but      *
 *   WITHOUT ANY WARRANTY; without even the implied warranty of            *
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU     *
 *   General Public License for more details.                              *
 *                                                                         *
 *   A copy of the GNU General Public License is available on the World    *
 *   Wide Web at <http://www.gnu.org/copyleft/gpl.html>. You can also      *
 *   obtain it by writing to the Free Software Foundation,                 *
 *   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.        *
 *                                                                         *
 ***************************************************************************
}
{
  Note: All resource strings should be prefixed with 'lis' (Lazarus IDE String)

}
unit LazarusIDEStrConsts;

{$mode objfpc}{$H+}

interface

uses
  Classes, SysUtils;

resourcestring
  // Common strings that can be used around Lazarus:
  lisLazarus = 'Lazarus';
  lisAdd  = 'Add';
  lisBtnAdd = '&Add';
  lisInsert = 'Insert';
  lisChange  = 'Change';
  lisDelete  = 'Delete';
  lisBtnDelete = '&Delete';
  lisRemove = 'Remove';
  lisBtnRemove = '&Remove';
  lisRename = 'Rename';
  lisReplace = 'Replace';
  lisBtnReplace = '&Replace';
  lisBtnDlgReplace = '&Replace ...';
  lisEdit = 'Edit';
  lisClear = 'Clear';
  lisOpen = 'Open';
  lisSave = 'Save';
  lisDlgSave = 'Save ...';
  lisSaveAs = 'Save As';
  lisSaveAll = 'Save All';
  lisExportHtml = 'Export as HTML';
  lisCloseAll = 'Close All';
  lisFile = 'File';
  lisNew = 'New';
  lisClose = 'Close';
  lisBtnClose = '&Close';
  lisMMAddsCustomOptions = 'Adds custom options:';
  lisMMDoesNotAddCustomOptions = 'Does not add custom options:';
  lisOk = 'OK';
  lisMenuOk = '&OK';
  lisCancel = 'Cancel';
  lisUnusedUnitsOf = 'Unused units of %s';
  lisNo = 'No';
  lisContinue = 'Continue';
  lisBreak = 'Break';
  lisExit = 'Exit';
  lisQuit = 'Quit';
  lisBtnQuit = '&Quit';
  lisRestart = 'Restart';
  lisHelp = 'Help';
  lisEnabled = 'Enabled';
  lisBtnEnabled = '&Enabled';
  lisUndo = 'Undo';
  lisRedo = 'Redo';
  lisCut = 'Cut';
  lisCopy = 'Copy';
  lisPaste = 'Paste';
  lisDown = 'Down';
  lisUp   = 'Up';
  lisRight = 'Right';
  lisLeft = 'Left';
  //lisTop = 'Top';
  //lisBottom = 'Bottom';
  lisName = 'Name';
  lisKey = 'Key';
  lisValue = 'Value';
  lisVariable = 'Variable';
  lisPath = 'Path';
  lisId = 'ID';
  lisCompile = 'Compile';
  lisCompileStage = 'Compile';
  lisBuild = 'Build';
  lisBuildCaption = 'Build';
  lisBuildStage = 'Build';
  lisRun = 'Run';
  lisRunStage = 'Run';
  lisRunButtonHint = 'Run';
  lisPause = 'Pause';
  lisStop = 'Stop';
  lisLess = 'Less';
  lisMore = 'More';
  lisMoreSub = 'More >>';
  lisDefault = 'Default';
  lisClone = 'Clone';
  lisExport = 'Export';
  lisDlgExport = 'Export ...';
  lisImport = 'Import';
  lisDlgImport = 'Import ...';

  lisImportPackageListXml = 'Import package list (*.xml)';
  lisExportPackageListXml = 'Export package list (*.xml)';
  lrsRescanLplFiles = 'Rescan lpl files';
  lrsPLDDeleteSelected = 'Delete selected';
  lisRenameShowResult = 'Show list of renamed Identifiers';

  // errors
  lisErrInvalidOption = 'Invalid option at position %d: "%s"';
  lisErrNoOptionAllowed = 'Option at position %d does not allow an argument: %s';
  lisErrOptionNeeded = 'Option at position %d needs an argument : %s';

  // command line help
  listhisHelpMessage = 'this help message';
  lisprimaryConfigDirectoryWhereLazarusStoresItsConfig = 'primary config '+
    'directory, where Lazarus stores its config files. Default is ';
  lislazarusOptionsProjectFilename = 'lazarus [options] <project-filename>';
  lisIDEOptions = 'IDE Options:';
  lisCmdLineLCLInterfaceSpecificOptions = 'LCL Interface specific options:';
  lisDoNotShowSplashScreen = 'Do not show splash screen';
  lisSkipLoadingLastProject = 'Skip loading last project';
  lisOverrideLanguage = 'Override language. For example --language=de.'+
    ' For possible values see files in the languages directory.';
  lissecondaryConfigDirectoryWhereLazarusSearchesFor =
    'secondary config '+
    'directory, where Lazarus searches for config template files. Default is ';
  lisFileWhereDebugOutputIsWritten =
    'file, where debug output is written to. If it is '+
    'not specified, debug output is written to the console.';
  lisGroupsForDebugOutput = 'Enable or Disable groups of debug output.' +
    ' Valid Options are:';
  lisLazarusDirOverride = 'directory, to be used as a basedirectory'; 

  // component palette
  lisSelectionTool = 'Selection tool';
  
  // macros
  lisCursorColumnInCurrentEditor = 'Cursor column in current editor';
  lisCursorRowInCUrrentEditor = 'Cursor row in current editor';
  lisCompilerFilename = 'Compiler filename';
  lisWordAtCursorInCurrentEditor = 'Word at cursor in current editor';
  lisExpandedFilenameOfCurrentEditor = 'Expanded filename of current editor file';
  lisFreePascalSourceDirectory = 'Free Pascal source directory';
  lisLazarusDirectory = 'Lazarus directory';
  lisLazarusLanguageID = 'Lazarus language ID (e.g. en, de, br, fi)';
  lisLazarusLanguageName = 'Lazarus language name (e.g. english, deutsch)';
  lisLCLWidgetType = 'LCL widget type';
  lisCOVarious = '%s (various)';
  lisTargetCPU = 'Target CPU';
  lisTargetOS = 'Target OS';
  lisSrcOS = 'Src OS';
  lisCommandLineParamsOfProgram = 'Command line parameters of program';
  lisPromptForValue = 'Prompt for value';
  lisProjectFilename = 'Project filename';
  lisProjectDirectory = 'Project directory';
  lisSaveCurrentEditorFile = 'Save current editor file';
  lisSaveAllModified = 'Save all modified files';
  lisTargetFilenameOfProject = 'Target filename of project';
  lisTargetFilenamePlusParams = 'Target filename + params';
  lisTestDirectory = 'Test directory';
  lisLaunchingCmdLine = 'Launching target command line';
  lisPublishProjDir = 'Publish project directory';
  lisProjectUnitPath = 'Project Unit Path';
  lisProjectIncPath = 'Project Include Path';
  lisProjectSrcPath = 'Project Src Path';
  lisProjectOutDir = 'Project Output directory (e.g. the ppu directory)';
  lisEnvironmentVariableNameAsParameter = 'Environment variable, name as parameter';
  lisUserSHomeDirectory = 'User''s home directory';
  lisMakeExe = 'Make Executable';
  lisPathOfTheMakeUtility = 'Path of the make utility';
  lisProjectMacroProperties = 'Project macro properties';
  lisOpenProject2 = 'Open project';
  lisFileHasNoProject = 'File has no project';
  lisTheFileIsNotALazarusProjectCreateANewProjectForThi = 'The file %s%s%s is '
    +'not a lazarus project.%sCreate a new project for this %s?';
  lisCreateProject = 'Create project';
  lisKMSaveProject = 'Save project';
  lisKMCloseProject = 'Close project';
  lisKMSaveProjectAs = 'Save project as';
  lisKMPublishProject = 'Publish project';
  lisOpenTheFileAsNormalSource = 'Open the file as normal source';
  lisOpenAsXmlFile = 'Open as XML file';
  lisAnErrorOccuredAtLastStartupWhileLoadingLoadThisPro = 'An error occured '
    +'at last startup while loading %s!%s%sLoad this project again?';
  lisOpenProjectAgain = 'Open project again';
  lisStartWithANewProject = 'Start with a new project';
  lisProjectMacroUnitPath = 'macro ProjectUnitPath';
  lisConfigDirectory = 'Lazarus config directory';

  lisPkgMacroPackageDirectoryParameterIsPackageID = 'Package directory. '
    +'Parameter is package ID';
  lisPkgMacroPackageSourceSearchPathParameterIsPackageID = 'Package source '
    +'search path. Parameter is package ID';
  lisPkgMacroPackageUnitSearchPathParameterIsPackageID = 'Package unit search '
    +'path. Parameter is package ID';
  lisPkgMacroPackageIncludeFilesSearchPathParameterIsPackageID = 'Package '
    +'include files search path. Parameter is package ID';

  // main bar menu
  lisMenuFile = '&File';
  lisMenuEdit = '&Edit';
  lisMenuSearch = '&Search';
  lisMenuSource = 'S&ource';
  lisMenuView = '&View';
  lisMenuProject = '&Project';
  lisMenuRun = '&Run';
  lisMenuPackage = 'Pa&ckage';
  lisMenuTools = '&Tools';
  lisMenuWindow = '&Window';
  lisMenuHelp = '&Help';
  
  lisMenuNewUnit = 'New Unit';
  lisMenuNewForm = 'New Form';
  lisMenuNewOther = 'New ...';
  lisMenuOpen = '&Open ...';
  lisMenuRevert = 'Revert';
  lisPESavePackageAs = 'Save Package As ...';
  lisPkgEditPublishPackage = 'Publish Package';
  lisPERevertPackage = 'Revert Package';
  lisMenuOpenRecent = 'Open &Recent';
  lisMenuSave = '&Save';
  lisMenuSaveAs = 'Save &As ...';
  lisKMSaveAs = 'SaveAs';
  lisKMSaveAll = 'SaveAll';
  lisDiscardChanges = 'Discard changes';
  lisDiscardChangesAll = 'Discard all changes';
  lisDoNotCloseTheProject = 'Do not close the project';
  lisDoNotCloseTheIDE = 'Do not close the IDE';
  lisConvert = 'Convert';
  lisPLDShowGlobalLinks = 'Show global links';
  lisPLDShowUserLinks = 'Show user links';
  lrsPLDLpkFileValid = 'lpk file valid (%s)';
  lrsPLDLpkFileInvalid = 'lpk file invalid (%s)';
  lisPLDGlobal = 'Global';
  lisCTDefDefineTemplates = 'Define templates';
  lisMenuCloseAll = 'Close A&ll';
  lisMenuCloseEditorFile = '&Close Editor File';
  lisMenuCleanDirectory = 'Clean Directory ...';

  lisMenuIndentSelection = 'Indent Selection';
  lisMenuUnindentSelection = 'Unindent Selection';
  lisMenuUpperCaseSelection = 'Uppercase Selection';
  lisMenuLowerCaseSelection = 'Lowercase Selection';
  lisMenuSwapCaseSelection = 'Swap Case in Selection';
  lisMenuTabsToSpacesSelection = 'Tabs to Spaces in Selection';
  lisKMEncloseSelection   = 'Enclose Selection';
  lisMenuEncloseSelection = 'Enclose Selection ...';
  lisEncloseInIFDEF     = 'Enclose in $IFDEF';
  lisMenuEncloseInIFDEF = 'Enclose in $IFDEF ...';
  lisMenuCommentSelection = 'Comment Selection';
  lisMenuUncommentSelection = 'Uncomment Selection';
  lisMenuToggleComment = 'Toggle Comment in Selection';
  lisMenuSortSelection = 'Sort Selection ...';
  lisMenuBeakLinesInSelection = 'Break Lines in Selection';
  lisKMSelectWordLeft = 'Select Word Left';
  lisKMSelectWordRight = 'Select Word Right';
  lisKMSelectLineStart = 'Select Line Start';
  lisKMSelectLineEnd = 'Select Line End';
  lisKMSelectPageTop = 'Select Page Top';
  lisKMSelectPageBottom = 'Select Page Bottom';
  lisUseAndClose = 'Use and close';
  lisMenuSelect = 'Select';
  lisMenuSelectAll = 'Select All';
  lisCheckAll = 'Check All';
  lisUncheckAll = 'Uncheck All';
  lisSAMAbstractMethodsNotYetOverridden = 'Abstract Methods - not yet overridden';
  lisMenuSelectToBrace = 'Select to Brace';
  lisMenuSelectCodeBlock = 'Select Code Block';
  lisMenuSelectWord = 'Select Word';
  lisMenuSelectLine = 'Select Line';
  lisMenuSelectParagraph = 'Select Paragraph';
  lisMenuInsertCharacter = 'Insert from Character Map ...';
  lisMenuInsertCVSKeyword = 'Insert CVS Keyword';
  lisMenuInsertGeneral = 'Insert General';
  lisGeneral = 'General';
  lisNone2 = 'none';
  lisOr = 'or';
  lisNone = '%snone';
  lisUnitPaths = 'Unit paths';
  lisIncludePaths = 'Include paths';
  lisSourcePaths = 'Source paths';

  lisMenuInsertGPLNotice = 'GPL Notice';
  lisMenuInsertLGPLNotice = 'LGPL Notice';
  lisMenuInsertModifiedLGPLNotice = 'Modified LGPL Notice';
  lisMenuInsertMITNotice = 'MIT Notice';
  lisMenuInsertUserName = 'Current Username';
  lisMenuInsertDateTime = 'Current Date and Time';
  lisMenuInsertChangeLogEntry = 'ChangeLog Entry';

  lisMenuFind = 'Find';
  lisBtnFind = '&Find';
  lisMenuFindNext = 'Find &Next';
  lisMenuFind2 = '&Find ...';
  lisMenuFindPrevious = 'Find &Previous';
  lisMenuFindInFiles = 'Find &in Files ...';
  lisMenuIncrementalFind = 'Incremental Find';
  lisMenuGotoLine = 'Goto Line ...';
  lisMenuJumpBack = 'Jump Back';
  lisMenuJumpForward = 'Jump Forward';
  lisMenuAddJumpPointToHistory = 'Add Jump Point to History';
  lisMenuViewJumpHistory = 'Jump History';
  lisMenuMacroListView = 'Editor Macros ...';
  lisMenuFindBlockOtherEndOfCodeBlock = 'Find Other End of Code Block';
  lisMenuFindCodeBlockStart = 'Find Start of Code Block';
  lisMenuFindDeclarationAtCursor = 'Find Declaration at Cursor';
  lisMenuOpenFilenameAtCursor = 'Open Filename at Cursor';
  lisMenuGotoIncludeDirective = 'Goto Include Directive';
  lisMenuJumpToNextError = 'Jump to Next Error';
  lisMenuJumpToPrevError = 'Jump to Previous Error';
  lisMenuSetFreeBookmark = 'Set a Free Bookmark';
  lisMenuJumpToNextBookmark = 'Jump to Next Bookmark';
  lisMenuJumpToPrevBookmark = 'Jump to Previous Bookmark';
  lisMenuProcedureList = 'Procedure List ...';

  lisMenuViewObjectInspector = 'Object Inspector';
  lisMenuViewSourceEditor = 'Source Editor';
  lisMenuViewCodeExplorer = 'Code Explorer';
  lisMenuViewCodeBrowser = 'Code Browser';
  lisMenuViewRestrictionBrowser = 'Restriction Browser';
  lisMenuViewComponents = '&Components';
  lisMenuJumpTo = 'Jump to';
  lisMenuJumpToImplementation = 'Jump to Implementation';
  lisMenuViewUnits = 'Units ...';
  lisMenuViewForms = 'Forms ...';
  lisMenuViewUnitDependencies = 'Unit Dependencies';
  lisKMViewUnitInfo = 'View Unit Info';
  lisMenuViewUnitInfo = 'Unit Information ...';
  lisMenuViewToggleFormUnit = 'Toggle Form/Unit View';
  lisMenuViewMessages = 'Messages';
  lisCopySelectedMessagesToClipboard = 'Copy Selected Messages to Clipboard';
  lisCopyAllShownMessagesToClipboard = 'Copy All Shown Messages to Clipboard';
  lisCopyAllShownAndHiddenMessagesToClipboard = 'Copy All Shown and Hidden'
                                               +' Messages to Clipboard';
  lisCopyItemToClipboard = 'Copy Item to Clipboard';
  lisCopySelectedItemToClipboard = 'Copy Selected Items to Clipboard';
  lisCopyAllItemsToClipboard = 'Copy All Items to Clipboard';
  lisExpandAll = 'Expand All (*)';
  lisCollapseAll = 'Collapse All (/)';
  lisSaveAllMessagesToFile = 'Save All Messages to File';
  lisEditHelp = 'Edit help';
  lisMenuViewSearchResults = 'Search Results';
  lisMenuViewAnchorEditor = 'Anchor Editor';
  lisMenuViewTabOrder = 'Tab Order';
  lisKMToggleViewComponentPalette = 'Toggle View Component Palette';
  lisMenuViewComponentPalette = 'Component Palette';
  lisMenuViewTodoList = 'ToDo List';
  lisMenuViewIDESpeedButtons = 'IDE Speed Buttons';
  lisMenuDebugWindows = 'Debug Windows';
  lisMenuViewWatches = 'Watches';
  lisMenuViewBreakPoints = 'BreakPoints';
  lisMenuViewLocalVariables = 'Local Variables';
  lisMenuViewPseudoTerminal = 'Terminal Output';
  lisMenuViewRegisters = 'Registers';
  lisMenuViewCallStack = 'Call Stack';
  lisMenuViewThreads = 'Threads';
  lisMenuViewHistory = 'History';
  lisMenuViewAssembler = 'Assembler';
  lisDbgAsmCopyToClipboard = 'Copy to Clipboard';
  lisMenuViewDebugOutput = 'Debug Output';
  lisMenuViewDebugEvents = 'Event Log';
  lisMenuIDEInternals = 'IDE Internals';
  lisMenuPackageLinks = 'Package Links ...';
  lisMenuAboutFPC = 'About FPC';
  lisAboutIDE = 'About IDE';
  lisMenuWhatNeedsBuilding = 'What Needs Building';

  lisMenuNewProject = 'New Project ...';
  lisMenuNewProjectFromFile = 'New Project from File ...';
  lisMenuOpenProject = 'Open Project ...';
  lisMenuCloseProject = 'Close Project';
  lisMenuOpenRecentProject = 'Open Recent Project';
  lisMenuSaveProject = 'Save Project';
  lisMenuSaveProjectAs = 'Save Project As ...';
  lisMenuPublishProject = 'Publish Project ...';
  lisPublishProject = 'Publish Project';
  lisMenuProjectInspector = 'Project Inspector';
  lisKMRemoveActiveFileFromProject = 'Remove Active File from Project';
  lisKMViewProjectSource = 'View Project Source';
  lisMenuAddToProject = 'Add Editor File to Project';
  lisMenuRemoveFromProject = 'Remove from Project ...';
  lisMenuViewProjectSource = '&View Project Source';
  lisMenuProjectOptions = 'Project Options ...';

  lisBFWorkingDirectoryLeaveEmptyForFilePath = 'Working directory (leave empty for file path)';
  lisBFBuildCommand = 'Build Command';
  lisMenuQuickCompile = 'Quick Compile';
  lisMenuCleanUpCompiled = 'Clean up Build Files ...';
  lisMenuAbortBuild = 'Abort Build';
  lisMenuProjectRun = '&Run';
  lisBFAlwaysBuildBeforeRun = 'Always build before run';
  lisDisAssGotoCurrentAddress = 'Goto Current Address';
  lisDisAssGotoCurrentAddressHint = 'Goto Current Address';
  lisDisAssGotoAddress = 'Goto Address';
  lisDisAssGotoAddressHint = 'Goto Address';

  lisBFRunCommand = 'Run Command';
  lisMenuShowExecutionPoint = 'S&how Execution Point';
  lisMenuStepInto = 'Step In&to';
  lisMenuStepOver = '&Step Over';
  lisMenuStepIntoInstr = 'Step Into Instruction';
  lisMenuStepIntoInstrHint = 'Step Into Instruction';
  lisMenuStepOverInstr = 'Step Over Instruction';
  lisMenuStepOverInstrHint = 'Step Over Instruction';
  lisMenuStepIntoContext = 'Step Into (Context)';
  lisMenuStepOverContext = 'Step Over (Context)';
  lisMenuStepOut = 'Step O&ut';
  lisMenuRunToCursor = 'Step over to &Cursor';
  lisKMStopProgram = 'Stop Program';
  lisContinueAndDoNotAskAgain = 'Continue and do not ask again';
  lisSuspiciousUnitPath = 'Suspicious unit path';
  lisThePackageAddsThePathToTheUnitPathOfTheIDEThisIsPr = 'The package %s '
    +'adds the path "%s" to the unit path of the IDE.%sThis is probably a '
    +'misconfiguration of the package.';
  lisMenuResetDebugger = 'Reset Debugger';
  lisKMCompilerOptions = 'Compiler Options';
  lisMenuCompilerOptions = 'Compiler Options ...';
  lisMenuRunParameters = 'Run &Parameters ...';
  lisMenuBuildFile = 'Build File';
  lisMenuRunFile = 'Run File';
  lisKMConfigBuildFile = 'Config %sBuild File%s';
  lisKMInspect = 'Inspect';
  lisKMEvaluateModify = 'Evaluate/Modify';
  lisKMAddWatch = 'Add watch';
  lisKMAddBpSource = 'Add Source Breakpoint';
  lisKMAddBpAddress = 'Add Address Breakpoint';
  lisKMAddBpWatchPoint = 'Add Data/WatchPoint';
  lisMenuConfigBuildFile = 'Configure Build+Run File ...';
  lisMenuInspect = '&Inspect ...';
  lisMenuEvaluate = 'E&valuate/Modify ...';
  lisMenuAddWatch = 'Add &Watch ...';
  lisMenuAddBreakpoint = 'Add &Breakpoint';

  lisInspectDialog = 'Debug Inspector';
  lisInspectData = 'Data';
  lisInspectProperties = 'Properties';
  lisInspectMethods = 'Methods';

  lisMenuNewPackage = 'New Package ...';
  lisMenuOpenPackage = 'Open Loaded Package ...';
  lisMenuOpenRecentPkg = 'Open Recent Package';
  lisMenuOpenPackageFile = 'Open Package File (.lpk) ...';
  lisMenuOpenPackageOfCurUnit = 'Open Package of Current Unit';
  lisMenuAddCurFileToPkg = 'Add Active File to Package ...';
  lisKMConfigureCustomComponents = 'Configure Custom Components';
  lisMenuConfigCustomComps = 'Configure Custom Components ...';

  lisMenuConfigExternalTools = 'Configure External Tools ...';
  lisMenuQuickSyntaxCheck = 'Quick Syntax Check';
  lisMenuQuickSyntaxCheckOk = 'Quick syntax check OK';
  lisMenuGuessUnclosedBlock = 'Guess Unclosed Block';
  lisMenuGuessMisplacedIFDEF = 'Guess Misplaced IFDEF/ENDIF';
  lisMenuMakeResourceString = 'Make Resource String ...';
  lisCaptionDiff = 'Diff';
  lisMenuDiff = 'Diff ...';
  lisMenuConvertDFMtoLFM = 'Convert Binary DFM to Text LFM + Check Syntax ...';
  lisMenuCheckLFM = 'Check LFM File in Editor';
  lisMenuConvertDelphiUnit = 'Convert Delphi Unit to Lazarus Unit ...';
  lisMenuConvertDelphiProject = 'Convert Delphi Project to Lazarus Project ...';
  lisMenuConvertDelphiPackage = 'Convert Delphi Package to Lazarus Package ...';
  lisMenuConvertEncoding = 'Convert Encoding of Projects/Packages ...';
  lisConvertEncodingOfProjectsPackages = 'Convert encoding of projects/packages';
  lisMenuExampleProjects = 'Example Projects ...';
  lisKMExampleProjects = 'Example Projects';
  lisMenuBuildLazarus = 'Build Lazarus with Current Profile';
  lisMenuBuildLazarusProf = 'Build Lazarus with Profile: %s';
  lisMenuConfigureBuildLazarus = 'Configure "Build Lazarus" ...';
  lisManageSourceEditors = 'Manage Source Editors ...';
  lisSourceEditorWindowManager = 'Source Editor Window Manager';
  lisProjectCount = '%d projects';
  lisIncludeSubDirectories = 'Include subdirectories';
  lisIncludeAllSubDirectories = 'Include all subdirectories';
  lisMEOther = 'Other tabs';
  lisTabsFor = 'Tabs for %s';
  lisRecentTabs = 'Recent tabs';
  lisMEProjects = 'Projects';
  lisMEAction = 'Action';
  lisMenuGeneralOptions = 'Options ...';
  lisMenuEditCodeTemplates = 'Code Templates ...';
  dlgEdCodeTempl = 'Code Templates';
  dlgTplFName = 'Template file name';

  lisMenuOnlineHelp = 'Online Help';
  lisMenuReportingBug = 'Reporting a Bug';
  lisReportingBugURL = 'http://wiki.lazarus.freepascal.org/How_do_I_create_a_bug_report';
  lisKMConfigureHelp = 'Configure Help';
  lisKMContextSensitiveHelp = 'Context sensitive help';
  lisKMEditContextSensitiveHelp = 'Edit context sensitive help';
  lisMenuConfigureHelp = 'Configure Help ...';
  lisMenuContextHelp = 'Context sensitive Help';
  lisMenuEditContextHelp = 'Edit context sensitive Help';
  lisMenuCreateFPDocFiles = 'Create FPDoc files';

  lisDsgCopyComponents = 'Copy selected components to clipboard';
  lisDsgCutComponents = 'Cut selected components to clipboard';
  lisDsgPasteComponents = 'Paste selected components from clipboard';
  lisDsgSelectParentComponent = 'Select parent component';
  lisDsgOrderMoveToFront = 'Move component to front';
  lisDsgOrderMoveToBack = 'Move component to back';
  lisDsgOrderForwardOne = 'Move component one forward';
  lisDsgOrderBackOne = 'Move component one back';

  // main
  lisChooseProgramSourcePpPasLpr = 'Choose program source (*.pp,*.pas,*.lpr)';
  lisProgramSourceMustHaveAPascalExtensionLikePasPpOrLp = 'Program source '
    +'must have a pascal extension like .pas, .pp or .lpr';
  lisCompilerOptionsForProject = 'Compiler Options for Project: %s';
  lisChooseDelphiUnit = 'Choose Delphi unit (*.pas)';
  lisChooseDelphiProject = 'Choose Delphi project (*.dpr)';
  lisChooseDelphiPackage = 'Choose Delphi package (*.dpk)';
  lisDelphiUnit = 'Delphi unit';
  lisDelphiProject = 'Delphi project';
  lisDelphiPackage = 'Delphi package';
  lisUnableToReadFileError = 'Unable to read file %s%s%s%sError: %s';
  lisFormatError = 'Format error';
  lisLFMFileCorrupt = 'LFM file corrupt';
  lisUnableToFindAValidClassnameIn = 'Unable to find a valid classname in %s%s%s';
  lisUnableToConvertFileError = 'Unable to convert file %s%s%s%sError: %s';
  lisUnableToWriteFileError = 'Unable to write file %s%s%s%sError: %s';
  lisErrorCreatingLrs = 'Error creating lrs';
  lisMissingUnitsComment = 'Comment Out';
  lisMissingUnitsForDelphi = 'For Delphi only';
  lisMissingUnitsSearch = 'Search Unit Path';
  lisMissingUnitsSkip = 'Skip this Unit';
  lisTheseUnitsWereNotFound = 'These units were not found:';
  lisMissingUnitsChoices = 'Your choices are:';
  lisMissingUnitsInfo1 = '1) Comment out the selected units.';
  lisMissingUnitsInfo1b = '1) Use the units only for Delphi.';
  lisMissingUnitsInfo2 = '2) Search for units. Found paths are added to project settings.';
  lisMissingUnitsInfo3 = '3) Abort now, install packages or fix paths and try again.';
  lisUnitNotFoundInProject = 'A unit not found in project %s';
  lisUnitsNotFoundInProject = 'Units not found in project %s';
  lisUnableToConvertLfmToLrsAndWriteLrsFile = 'Unable to convert lfm to lrs and write lrs file.';
  lisProjectPathHint = 'Directory where project''s main file must be';
  lisAddDelphiDefine = 'Add defines simulating Delphi7';
  lisAddDelphiDefineHint = 'Useful when the code has checks for supported compiler versions';
  lisBackupChangedFiles = 'Make backup of changed files';
  lisBackupHint = 'Creates a Backup directory under project directory';
  lisStartConversion = 'Start Conversion';
  lisConvertTarget = 'Target';
  lisConvertTargetHint = 'Converter adds conditional compilation to support different targets';
  lisConvertTargetCrossPlatform = 'Cross-platform';
  lisConvertTargetCrossPlatformHint = 'Cross-platform versus Windows-only';
  lisConvertTargetSupportDelphi = 'Support Delphi';
  lisConvertTargetSupportDelphiHint = 'Use conditional compilation to support Delphi';
  lisConvertTargetSameDfmFile = 'Use the same DFM form file';
  lisConvertTargetSameDfmFileHint = 'Same DFM file for Lazarus and Delphi instead of copying it to LFM';
  lisKeepFileOpen = 'Keep converted files open in editor';
  lisKeepFileOpenHint = 'All project files will be open in editor after conversion';
  lisConvUnknownProps = 'Unknown properties';
  lisConvTypesToReplace = 'Types to replace';
  lisConvTypeReplacements = 'Type Replacements';
  lisConvUnitsToReplace = 'Units to replace';
  lisConvUnitReplacements = 'Unit Replacements';
  lisConvUnitReplHint = 'Unit names in uses section of a source unit';
  lisConvTypeReplHint = 'Unknown types in form file (DFM/LFM)';
  lisConvCoordOffs = 'Coordinate offsets';
  lisConvCoordHint = 'An offset is added to Top coordinate of controls inside visual containers';
  lisConvFuncsToReplace = 'Functions / procedures to replace';
  lisConvDelphiCategories = 'Categories:';
  lisConvFuncReplacements = 'Function Replacements';
  lisConvFuncReplHint = 'Some Delphi functions can be replaced with LCL function';
  lisConvAddCommentAfterReplacement = 'Add comment after replacement';
  lisConvDelphiName = 'Delphi Name';
  lisConvNewName = 'New Name';
  lisConvParentContainer = 'Parent Container';
  lisConvTopOff = 'Top offset';
  lisConvLeftOff = 'Left offset';
  lisConvDelphiFunc = 'Delphi Function';
  lisScanning = 'Scanning';
  lisScanParentDir = 'Scanning parent directory';
  lisReplacement = 'Replacement';
  lisReplacements = 'Replacements';
  lisInteractive = 'Interactive';
  lisAutomatic = 'Automatic';
  lisProperties = 'Properties (replace or remove)';
  lisTypes = 'Types (not removed if no replacement)';
  lisReplaceRemoveUnknown = 'Fix unknown properties and types';
  lisReplacementFuncs = 'Replacement functions';
  lisFilesHaveRightEncoding = '*** All found files already have the right encoding ***';

  lisUnableToLoadOldResourceFileTheResourceFileIs = 'Unable to load old '
    +'resource file.%sThe resource file is the first include file in the%'
    +'sinitialization section.%sFor example {$I %s.lrs}.%sProbably a syntax error.';
  lisResourceLoadError = 'Resource load error';
  lisIgnoreMissingFile = 'Ignore missing file';
  lisnoname = 'noname';
  lisTheDestinationDirectoryDoesNotExist = 'The destination directory%s%s%s%s '
    +'does not exist.';
  lisRenameFile = 'Rename file?';
  lisThisLooksLikeAPascalFileItIsRecommendedToUseLowerC = 'This looks like a '
    +'pascal file.%sIt is recommended to use lower case filenames, to avoid '
    +'various problems on some filesystems and different compilers.%sRename '
    +'it to lowercase?';
  lisRenameToLowercase = 'Rename to lowercase';
  lisKeepName = 'Keep name';
  lisOverwriteFile = 'Overwrite file?';
  lisAFileAlreadyExistsReplaceIt = 'A file %s%s%s already exists.%sReplace it?';
  lisOverwriteFileOnDisk = 'Overwrite file on disk';
  lisAmbiguousFilesFound = 'Ambiguous files found';
  lisThereAreOtherFilesInTheDirectoryWithTheSameName = 'There are other files '
    +'in the directory with the same name,%swhich only differ in case:%s%s%'
    +'sDelete them?';
  lisDeleteOldFile = 'Delete old file %s%s%s?';
  lisDeletingOfFileFailed = 'Deleting of file %s%s%s failed.';
  lisStreamingError = 'Streaming error';
  lisUnableToStreamT = 'Unable to stream %s:T%s.';
  lisPathToInstance = 'Path to failed Instance:';
  lisResourceSaveError = 'Resource save error';
  lisUnableToAddResourceHeaderCommentToResourceFile = 'Unable to add resource '
    +'header comment to resource file %s%s%s%s.%sProbably a syntax error.';
  lisUnableToAddResourceTFORMDATAToResourceFileProbably = 'Unable to add '
    +'resource T%s:FORMDATA to resource file %s%s%s%s.%sProbably a syntax error.';
  lisUnableToCreateFile2 = 'Unable to create file %s%s%s';
  lisContinueWithoutLoadingForm = 'Continue without loading form';
  lisCancelLoadingUnit = 'Cancel loading unit';
  lisAbortAllLoading = 'Abort all loading';
  lisSkipFile = 'Skip file';
  lisUnableToTransformBinaryComponentStreamOfTIntoText = 'Unable to transform '
    +'binary component stream of %s:T%s into text.';
  lisTheFileWasNotFoundIgnoreWillGoOnLoadingTheProject = 'The file %s%s%s%'
    +'swas not found.%sIgnore will go on loading the project,%sAbort  will '
    +'stop the loading.';
  lisSkipFileAndContinueLoading = 'Skip file and continue loading';
  lisAbortLoadingProject = 'Abort loading project';
  lisFileNotFound2 = 'File %s%s%s not found.%s';
  lisFileNotFoundDoYouWantToCreateIt = 'File %s%s%s not found.%sDo you want '
    +'to create it?%s';
  lisProjectInfoFileDetected = 'Project info file detected';
  lisTheFileSeemsToBeTheProgramFileOfAnExistingLazarusP = 'The file %s seems '
    +'to be the program file of an existing lazarus Project.';
  lisTheFileSeemsToBeAProgramCloseCurrentProject = 'The file %s%s%s%sseems to '
    +'be a program. Close current project and create a new lazarus project '
    +'for this program?%s"No" will load the file as normal source.';
  lisProgramDetected = 'Program detected';
  lisUnableToConvertTextFormDataOfFileIntoBinaryStream = 'Unable to convert '
    +'text form data of file %s%s%s%s%sinto binary stream. (%s)';
  lisFormLoadError = 'Form load error';
  lisSaveProject = 'Save project %s (*%s)';
  lisRemoveUnitPath = 'Remove unit path?';
  lisTheDirectoryContainsNoProjectUnitsAnyMoreRemoveThi = 'The directory "%s" '
    +'contains no project units any more. Remove this directory from the '
    +'project''s unit search path?';
  lisInvalidProjectFilename = 'Invalid project filename';
  lisisAnInvalidProjectNamePleaseChooseAnotherEGProject = '%s%s%s is an '
    +'invalid project name.%sPlease choose another (e.g. project1.lpi)';
  lisTheNameIsNotAValidPascalIdentifier = 'The name %s%s%s is not a valid '
    +'pascal identifier.';
  lisChooseADifferentName = 'Choose a different name';
  lisTheProjectInfoFileIsEqualToTheProjectMainSource = 'The project info '
    +'file %s%s%s%sis equal to the project main source file!';
  lisUnitIdentifierExists = 'Unit identifier exists';
  lisThereIsAUnitWithTheNameInTheProjectPleaseChoose = 'There is a unit with the '
    +'name %s%s%s in the project.%sPlease choose a different name';
  lisErrorCreatingFile = 'Error creating file';
  lisUnableToCreateFile3 = 'Unable to create file%s%s%s%s';
  lisCopyError2 = 'Copy error';
  lisSourceDirectoryDoesNotExist = 'Source directory %s%s%s does not exist.';
  lisUnableToCreateDirectory = 'Unable to create directory %s%s%s.';
  lisUnableToCopyFileTo = 'Unable to copy file %s%s%s%sto %s%s%s';
  lisSorryThisTypeIsNotYetImplemented = 'Sorry, this type is not yet implemented';
  lisFileHasChangedSave = 'File %s%s%s has changed. Save?';
  lisUnitHasChangedSave = 'Unit %s%s%s has changed. Save?';
  lisSourceOfPageHasChangedSave = 'Source of page %s%s%s has changed. Save?';
  lisSourceOfPageHasChangedSaveExtended = 'Sources of more than one page have changed. Save page %s%s%s? (%d more)';
  lisSourceModified = 'Source modified';
  lisOpenProject = 'Open Project?';
  lisOpenTheProject = 'Open the project %s?';
  lisOpenPackage = 'Open Package?';
  lisOpenThePackage = 'Open the package %s?';
  lisRevertFailed = 'Revert failed';
  lisFileIsVirtual = 'File %s%s%s is virtual.';
  lisUnableToWrite = 'Unable to write %s%s%s%s%s.';
  lisFileNotText = 'File not text';
  lisUnableToRenameFile = 'Unable to rename file';
  lisUnableToCopyFile = 'Unable to copy file';
  lisWriteError = 'Write Error';
  lisFileDoesNotLookLikeATextFileOpenItAnyway2 = 'File %s%s%s%sdoes not look '
    +'like a text file.%sOpen it anyway?';
  lisUnableToCreateBackupDirectory = 'Unable to create backup directory %s%s%s.';
  lisSourceAndDestinationAreTheSame =
    'Source and Destination are the same:%s%s';
  lisUnableToRenameFileTo2 = 'Unable to rename file %s%s%s%sto %s%s%s.';
  lisUnableToCopyFileTo2 = 'Unable to copy file %s%s%s%sto %s%s%s.';
  lisFileDoesNotLookLikeATextFileOpenItAnyway = 'File %s%s%s%sdoes not look '
    +'like a text file.%sOpen it anyway?';
  lisInvalidCommand = 'Invalid command';
  lisTheCommandAfterIsNotExecutable = 'The command after %s%s%s is not executable.';
  lisInvalidDestinationDirectory = 'Invalid destination directory';
  lisDestinationDirectoryIsInvalidPleaseChooseAComplete = 'Destination '
    +'directory %s%s%s is invalid.%sPlease choose a complete path.';
  lisUnableToCleanUpDestinationDirectory = 'Unable to clean up destination directory';
  lisCommandAfterInvalid = 'Command after invalid';
  lisTheCommandAfterPublishingIsInvalid = 'The command after publishing is '
    +'invalid:%s%s%s%s';
  lisUnableToCleanUpPleaseCheckPermissions = 'Unable to clean up %s%s%s.%'
    +'sPlease check permissions.';
  lisCommandAfterPublishingModule = 'Command after publishing module';
  lisUnableToAddToProjectBecauseThereIsAlreadyAUnitWith = 'Unable to add %s '
    +'to project, because there is already a unit with the same name in the Project.';
  lisAddToProject = 'Add %s to project?';
  lisTheFile = 'The file %s%s%s';
  lisAddToUnitSearchPath = 'Add to unit search path?';
  lisTheNewUnitIsNotYetInTheUnitSearchPathAddDirectory = 'The new unit is not '
    +'yet in the unit search path.%sAdd directory %s?';
  lisisAlreadyPartOfTheProject = '%s is already part of the Project.';
  lisRemoveFromProject = 'Remove from Project';
  lisCreateAProjectFirst = 'Create a project first!';
  lisTheTestDirectoryCouldNotBeFoundSeeIDEOpt = 'The Test Directory '
    +'could not be found:%s%s%s%s%s(see IDE options)';
  lisBuildNewProject = 'Build new project';
  lisTheProjectMustBeSavedBeforeBuildingIfYouSetTheTest = 'The project must '
    +'be saved before building%sIf you set the Test Directory in the '
    +'IDE options,%syou can create new projects and build them at '
    +'once.%sSave project?';
  lisBusy = 'Busy';
  lisCanNotTestTheCompilerWhileDebuggingOrCompiling = 'Cannot test the '
    +'compiler while debugging or compiling.';
  lisProjectSuccessfullyBuilt = 'Project %s%s%s successfully built';
  lisExecutingCommandBefore = 'Executing command before';
  lisExecutingCommandAfter = 'Executing command after';
  lisNoProgramFileSFound = 'No program file %s%s%s found.';
  lisErrorInitializingProgramSErrorS = 'Error initializing program%s%s%s%s%sError: %s';
  lisNotNow = 'Not now';
  lisYouCanNotBuildLazarusWhileDebuggingOrCompiling = 'You can not build '
    +'lazarus while debugging or compiling.';
  lisUnableToSaveFile = 'Unable to save file %s%s%s';
  lisReadError = 'Read Error';
  lisUnableToReadFile2 = 'Unable to read file %s%s%s!';
  lisUnableToReadTheProjectInfoFile = 'Unable to read the project info file%s%s%s%s.';
  lisUnableToReadLpi = 'Unable to read lpi';
  lisStrangeLpiFile = 'Strange lpi file';
  lisTheFileDoesNotLookLikeALpiFile = 'The file %s does not look like a lpi file.';
  lisUnableToReadTheProjectInfoFile2 = 'Unable to read the project info file%s%s%s%s.';
  lisAmbiguousUnitFound2 = 'Ambiguous unit found';
  lisTheUnitExistsTwiceInTheUnitPathOfThe = 'The unit %s exists twice in the '
    +'unit path of the %s:';
  lisHintCheckIfTwoPackagesContainAUnitWithTheSameName = 'Hint: Check if two '
    +'packages contain a unit with the same name.';
  lisIgnoreAll = 'Ignore all';
  lisDeleteFileFailed = 'Delete file failed';
  lisUnableToRemoveOldBackupFile = 'Unable to remove old backup file %s%s%s!';
  lisRenameFileFailed = 'Rename file failed';
  lisUnableToRenameFileTo = 'Unable to rename file %s%s%s to %s%s%s!';
  lisBackupFileFailed = 'Backup file failed';
  lisUnableToBackupFileTo = 'Unable to backup file %s%s%s to %s%s%s!';
  lisFileNotLowercase = 'File not lowercase';
  lisTheUnitIsNotLowercaseTheFreePascalCompiler = 'The unit filename %s%s%s is '
    +'not lowercase.%sThe Free Pascal compiler does not search for all cases.'
    +' It is recommended to use lowercase filename.%s%sRename file lowercase?';
  lisDeleteAmbiguousFile = 'Delete ambiguous file?';
  lisAmbiguousFileFoundThisFileCanBeMistakenWithDelete = 'Ambiguous file '
    +'found: %s%s%s%sThis file can be mistaken with %s%s%s%s%sDelete the '
    +'ambiguous file?';
  lisLazarusEditorV = 'Lazarus IDE v%s';
  lisnewProject = '(new project)';
  liscompiling = '%s (compiling ...)';
  lisdebugging = '%s (debugging ...)';
  lisRunning = '%s (running ...)';
  lisUnableToFindFile = 'Unable to find file %s%s%s.';
  lisUnableToFindFileCheckSearchPathInProjectCompilerOption = 'Unable to find '
    +'file %s%s%s.%sIf it belongs to your project, check search path '
    +'in%sProject -> Compiler Options -> Search Paths -> Other Unit Files.'
    +' If this file belongs to a package, check the appropriate package compiler'
    +' options. If this file belongs to lazarus, make sure compiling clean.'
    +' If the file belongs to FPC then check fpc.cfg.'
    +' If unsure, check Project -> CompilerOptions -> Test';
  lisNOTECouldNotCreateDefineTemplateForFreePascal = 'NOTE: Could not create '
    +'Define Template for Free Pascal Sources';
  lisClassNotFound = 'Class not found';
  lisOIFClassNotFound = 'Class %s%s%s not found.';
  lisClassIsNotARegisteredComponentClassUnableToPaste = 'Class %s%s%s is not '
    +'a registered component class.%sUnable to paste.';
  lisControlNeedsParent = 'Control needs parent';
  lisTheClassIsATControlAndCanNotBePastedOntoANonContro = 'The class %s%s%s '
    +'is a TControl and can not be pasted onto a non control.%sUnable to paste.';
  lisConversionError = 'Conversion error';
  lisUnableToConvertComponentTextIntoBinaryFormat = 'Unable to convert '
    +'component text into binary format:%s%s';
  lisNOTECouldNotCreateDefineTemplateForLazarusSources = 'NOTE: Could not '
    +'create Define Template for Lazarus Sources';
  lisInvalidExpressionHintTheMakeResourcestringFunction = 'Invalid expression.%'
    +'sHint: The "Make Resourcestring" function expects a string constant in a '
    +'single file. Please select the expression and try again.';
  lisSelectionExceedsStringConstant = 'Selection exceeds string constant';
  lisHintTheMakeResourcestringFunctionExpectsAStringCon2 = 'Hint: The "Make '
    +'Resourcestring" function expects a string constant.%sPlease select only '
    +'a string expression and try again.';
  lisNoResourceStringSectionFound = 'No ResourceString Section found';
  lisUnableToFindAResourceStringSectionInThisOrAnyOfThe = 'Unable to find a '
    +'ResourceString section in this or any of the used units.';
  lisComponentNameIsNotAValidIdentifier = 'Component name %s%s%s is not a '
    +'valid identifier';
  lisComponentNameIsAPascalKeyword = 'Component name "%s" is a pascal keyword.';
  lisOwnerIsAlreadyUsedByTReaderTWriterPleaseChooseAnot = '''Owner'' is '
    +'already used by TReader/TWriter. Please choose another name.';
  lisDuplicateNameAComponentNamedAlreadyExistsInTheInhe = 'Duplicate name: A '
    +'component named %s%s%s already exists in the inherited component %s';
  lisComponentNameIsKeyword = 'Component name %s%s%s is keyword';
  lisTheUnitItselfHasAlreadyTheNamePascalIdentifiersMus = 'The unit itself '
    +'has already the name %s%s%s. Pascal identifiers must be unique.';
  lisUnableToRenameVariableInSource = 'Unable to rename variable in source.';
  lisUnableToUpdateCreateFormStatementInProjectSource = 'Unable to update '
    +'CreateForm statement in project source';
  lisThereIsAlreadyAFormWithTheName = 'There is already a form with the name %s%s%s';
  lisThereIsAlreadyAUnitWithTheNamePascalIdentifiersMus = 'There is already a '
    +'unit with the name %s%s%s. Pascal identifiers must be unique.';
  lisSeeMessages = 'See messages.';
  lisError = 'Error: ';
  lisWarning = 'Warning: ';
  lisFile2 = 'File: ';
  lisDirectory = 'Directory: ';
  lisYouCanDownloadFPCAndTheFPCSourcesFromHttpSourcefor = 'You can download '
    +'FPC and the FPC sources from http://sourceforge.net/projects/lazarus/?'
    +'source=directory';
  lisSaveChanges = 'Save changes?';
  lisSaveFileBeforeClosingForm = 'Save file %s%s%s%sbefore closing form %s%s%s?';
  lisUnableToRenameFormInSource = 'Unable to rename form in source.';
  lisTheComponentIsInheritedFromToRenameAnInheritedComp = 'The component %s '
    +'is inherited from %s.%sTo rename an inherited component open the '
    +'ancestor and rename it there.';
  lisUnableToFindMethod = 'Unable to find method.';
  lisUnableToCreateNewMethod = 'Unable to create new method.';
  lisUnableToShowMethod = 'Unable to show method.';
  lisPleaseFixTheErrorInTheMessageWindow = 'Please fix the error shown in the'
    +' message window, which is normally below the source editor.';
  lisMethodClassNotFound = 'Method class not found';
  lisClassOfMethodNotFound = 'Class %s%s%s of method %s%s%s not found.';
  lisUnableToRenameMethodPleaseFixTheErrorShownInTheMessag = 'Unable to rename '
    +'method. Please fix the error shown in the message window.';
  lisStopDebugging = 'Stop Debugging?';
  lisStopTheDebugging = 'Stop the debugging?';
  lisCannotFindLazarusStarter = 'Cannot find lazarus starter:%s%s';
  lisInfoBuildLines  = 'Lines:';
  lisInfoBuildErrors = 'Errors:';
  lisInfoBuildHint = 'Hints:';
  lisInfoBuildWarning = 'Warnings:';
  lisInfoBuildProject   = 'Project:';
  listInfoBuildCompiling = 'Compiling:';
  lisInfoBuildCompile = 'Compiling ...';
  lisFPCTooOld = 'FPC too old';
  lisTheProjectUsesTheNewFPCResourcesWhichRequiresAtLea = 'The project uses '
    +'the new FPC resources, which requires at least FPC 2.4';
  lisInfoBuildError = 'Error ...';
  lisCreateDirectory = 'Create directory?';
  lisTheOutputDirectoryIsMissing = 'The output directory %s%s%s is missing.';
  lisCreateIt = 'Create it';
  lisInfoBuildSuccess = 'Success ...';
  lisInfoBuildAbort = 'Aborted ...';
  lisInfoBuildCaption = 'Compile Project';
  lisInfoBuildMakeAbort = 'Abort';
  lisInfoBuildNote = 'Notes:';
  listInfoBuildAutoCloseOnSuccess = '&Automatically close on success';

  // file dialogs
  lisOpenFile = 'Open File';
  lisOpenFile2 = 'Open file';
  lisProjectSRaisedExceptionClassS = 'Project %s raised exception class ''%s''.';
  lisProjectSRaisedExceptionClassSWithMessageSS = 'Project %s raised '
    +'exception class ''%s'' with message:%s%s';
  lisProjectSRaisedExceptionInFileLineSrc = '%0:s%0:s In file ''%1:s'' at line %2:d:%0:s%3:s';
  lisProjectSRaisedExceptionInFileLine    = '%0:s%0:s In file ''%1:s'' at line %2:d';
  lisProjectSRaisedExceptionInFileAddress = '%0:s%0:s In file ''%1:s'' at address %2:x';
  lisProjectSRaisedExceptionAtAddress     = '%0:s%0:s At address %1:x';
  lisPEEditVirtualUnit = 'Edit Virtual Unit';
  lisIECOExportFileExists = 'Export file exists';
  lisIECOExportFileExistsOpenFileAndReplaceOnlyCompilerOpti = 'Export file %s%'
    +'s%s exists.%sOpen file and replace only compiler options?%s(Other '
    +'settings will be kept.)';
  lisIECOOpenOrLoadCompilerOptions = 'Open or Load Compiler Options';
  lisIECOErrorAccessingXml = 'Error accessing xml';
  lisIECOErrorLoadingXml = 'Error loading xml';
  lisIECOErrorLoadingXmlFile = 'Error loading xml file %s%s%s:%s%s';
  lisIECOErrorAccessingXmlFile = 'Error accessing xml file %s%s%s:%s%s';
  lisIECORecentFiles = 'Recent files';
  lisIECOSaveToRecent = 'Save to recent';
  lisIECOOpenRecent = 'Open recent';
  lisIECOSaveToFile = 'Save to file';
  lisIECOLoadFromFile = 'Load from file';
  lisLazarusFile = 'Lazarus file';
  lisPascalUnit = 'Pascal unit';
  lisPascalSourceFile = 'Pascal source file';
  lisFreePascalSourceFile = 'Free Pascal source file';
  lisDebugUnableToLoadFile = 'Unable to load file';
  lisDebugUnableToLoadFile2 = 'Unable to load file %s%s%s.';
  lisOpenProjectFile = 'Open Project File';
  lisLazarusProjectInfoFile = 'Lazarus Project Info file';
  lisAllFiles = 'All Files';
  lisExePrograms = 'Programs';
  lisSelectFile = 'Select the file';
  lisClickHereToBrowseTheFileHint = 'Click here to browse the file';
  lisOpenPackageFile = 'Open Package File';
  lisSaveSpace = 'Save ';
  lisSelectDFMFiles = 'Select Delphi form files (*.dfm)';
  lisChooseDirectory = 'Choose directory';
  lisDestinationDirectory = 'Destination directory';
  lisCommandAfter = 'Command after';
  lisChooseLazarusSourceDirectory = 'Choose Lazarus Directory';
  lisChooseCompilerPath = 'Choose compiler filename (%s)';
  lisChooseFPCSourceDir = 'Choose FPC source directory';
  lisChooseCompilerMessages = 'Choose compiler messages file';
  lisChooseMakePath = 'Choose make path';
  lisChooseDebuggerPath = 'Choose debugger filename';
  lisChooseTestBuildDir = 'Choose the directory for tests';
  lisLazarusDesktopSettings = 'Lazarus Desktop Settings';
  lisXMLFiles = 'XML files';

  // dialogs
  lisProjectChanged = 'Project changed';
  lisSaveChangesToProject = 'Save changes to project %s?';
  lisProjectSessionChanged = 'Project session changed';
  lisSaveSessionChangesToProject = 'Save session changes to project %s?';

  lisFPCSourceDirectoryError = 'FPC Source Directory error';
  lisCompilerError = 'Compiler error';
  lisAboutLazarus = 'About Lazarus';
  lisVersion = 'Version';
  lisVerToClipboard = 'Copy version information to clipboard';
  lisLogo = 'Logo';
  lisDate = 'Date';
  lisFPCVersion = 'FPC Version: ';
  lisSVNRevision = 'SVN Revision: ';
  lisPrior = 'prior %s';
  lisWelcomeToLazarusThereIsAlreadyAConfigurationFromVe = 'Welcome to Lazarus '
    +'%s%s%sThere is already a configuration from version %s in%s%s%s';
  lisTheOldConfigurationWillBeUpgraded = 'The old configuration will be '
    +'upgraded.';
  lisTheConfigurationWillBeDowngradedConverted = 'The configuration will be '
    +'downgraded/converted.';
  lisIfYouWantToUseTwoDifferentLazarusVersionsYouMustSt = 'If you want to use '
    +'two different Lazarus versions you must start the second Lazarus with '
    +'the command line parameter primary-config-path or pcp.%s%sFor example:%s';
  lisUpgradeConfiguration = 'Upgrade configuration';
  lisUpgrade = 'Upgrade';
  lisDowngradeConfiguration = 'Downgrade configuration';
  lisDowngrade = 'Downgrade';
  lisAboutLazarusMsg =
       'License: GPL/LGPL. See Lazarus and Free Pascal sources for license details.'
      +'%s'
      +'Lazarus is an IDE to create graphical and console applications '
      +'with Free Pascal. Free Pascal is Pascal and Object Pascal '
      +'compiler that runs on Windows, Linux, Mac OS X, FreeBSD and more.'
      +'%s'
      +'Lazarus is the missing part of the puzzle that will allow you to '
      +'develop programs for all of the above platforms in a Delphi like '
      +'environment. The IDE is a RAD tool that includes a form designer.'
      +'%s'
      +'As Lazarus is growing we need more developers.';
  lisAboutNoContributors = 'Cannot find contributors list.';
  lisUnitNameAlreadyExistsCap = 'Unitname already in project';
  lisTheUnitAlreadyExists = 'The unit %s%s%s already exists.';
  lisForceRenaming = 'Force renaming';
  lisCancelRenaming = 'Cancel renaming';
  lisAbortAll = 'Abort all';
  lisInvalidPascalIdentifierCap = 'Invalid Pascal Identifier';
  lisInvalidPascalIdentifierText = 'The name "%s" is not a valid pascal identifier.';
  lisCopyError = 'Copy Error';

  lisCloseAllTabsTitle = 'Close Source Editor Window';
  lisCloseAllTabsQuestion = 'Closing a Source Editor Window. Do you want close all files or hide the window?';
  lisCloseAllTabsClose = 'Close files';
  lisCloseAllChecked = 'Close All Checked';
  lisCloseAllTabsHide = 'Hide window';
  lisSaveAllChecked = 'Save All Checked';
  lisActivate = 'Activate';
  lisActivateSelected = 'Activate Selected';

  // hints
  lisHintSaveAll = 'Save all';
  lisHintToggleFormUnit = 'Toggle Form/Unit';
  lisHintViewUnits = 'View Units';
  lisHintViewForms = 'View Forms';
  lisHintStepInto = 'Step Into';
  lisHintStepOver = 'Step Over';
  lisHintStepOut  = 'Run until function returns';

  lisGPLNotice =
    '<description>'
   +'%s'
   +'Copyright (C) <year> <name of author> <contact>'
   +'%s'
   +'This source is free software; you can redistribute it and/or modify '
   +'it under the terms of the GNU General Public License as published by '
   +'the Free Software Foundation; either version 2 of the License, or '
   +'(at your option) any later version. '
   +'%s'
   +'This code is distributed in the hope that it will be useful, but '
   +'WITHOUT ANY WARRANTY; without even the implied warranty of '
   +'MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU '
   +'General Public License for more details. '
   +'%s'
   +'A copy of the GNU General Public License is available on the World '
   +'Wide Web at <http://www.gnu.org/copyleft/gpl.html>. You can also '
   +'obtain it by writing to the Free Software Foundation, '
   +'Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.';

  lisLGPLNotice =
    '<description>'
   +'%s'
   +'Copyright (C) <year> <name of author> <contact>'
   +'%s'
   +'This library is free software; you can redistribute it and/or modify '
   +'it under the terms of the GNU Library General Public License as published '
   +'by the Free Software Foundation; either version 2 of the License, or '
   +'(at your option) any later version. '
   +'%s'
   +'This program is distributed in the hope that it will be useful, '
   +'but WITHOUT ANY WARRANTY; without even the implied warranty of '
   +'MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the '
   +'GNU Library General Public License for more details. '
   +'%s'
   +'You should have received a copy of the GNU Library General Public License '
   +'along with this library; if not, write to the Free Software '
   +'Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.';

  lisModifiedLGPLNotice =
    '<description>'
   +'%s'
   +'Copyright (C) <year> <name of author> <contact>'
   +'%s'
   +'This library is free software; you can redistribute it and/or modify '
   +'it under the terms of the GNU Library General Public License as published '
   +'by the Free Software Foundation; either version 2 of the License, or '
   +'(at your option) any later version with the following modification:'
   +'%s'
   +'As a special exception, the copyright holders of this library give you '
   +'permission to link this library with independent modules to produce an '
   +'executable, regardless of the license terms of these independent modules,'
   +'and to copy and distribute the resulting executable under terms of your '
   +'choice, provided that you also meet, for each linked independent module, '
   +'the terms and conditions of the license of that module. An independent '
   +'module is a module which is not derived from or based on this library. If '
   +'you modify this library, you may extend this exception to your version of '
   +'the library, but you are not obligated to do so. If you do not wish to do '
   +'so, delete this exception statement from your version.'
   +'%s'
   +'This program is distributed in the hope that it will be useful, '
   +'but WITHOUT ANY WARRANTY; without even the implied warranty of '
   +'MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the '
   +'GNU Library General Public License for more details. '
   +'%s'
   +'You should have received a copy of the GNU Library General Public License '
   +'along with this library; if not, write to the Free Software '
   +'Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.';

  // MIT license aka Expat license see: http://www.opensource.org/licenses/MIT
  lisMITNotice =
    '<description>'
    +'%s'
    +'Copyright (c) <year> <copyright holders>'
    +'%s'
    +'Permission is hereby granted, free of charge, to any person obtaining a copy of '
    +'this software and associated documentation files (the "Software"), to deal in '
    +'the Software without restriction, including without limitation the rights to '
    +'use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of '
    +'the Software, and to permit persons to whom the Software is furnished to do so, '
    +'subject to the following conditions:'
    +'%s'
    +'The above copyright notice and this permission notice shall be included in all '
    +'copies or substantial portions of the Software.'
    +'%s'
    +'THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR '
    +'IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, '
    +'FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE '
    +'AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER '
    +'LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, '
    +'OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE '
    +'SOFTWARE.';

  // Options dialog groups
  dlgGroupEnvironment = 'Environment';
  dlgGroupEditor = 'Editor';
  dlgGroupCodetools = 'Codetools';
  dlgGroupCodeExplorer = 'Code Explorer';
  dlgGroupDebugger = 'Debugger';
  lisUnexpectedResultTheDebuggerWillTerminate = 'Unexpected result:%sThe '
    +'debugger will terminate';
  lisResponseContinue = 'Response: %sContinue ?';

  // Options dialog
  dlgIDEOptions = 'IDE Options';
  dlgBakNoSubDirectory = '(no subdirectory)';
  dlgEOFocusMessagesAfterCompilation = 'Focus messages after compilation';
  lisCheckForDiskFileChangesViaContentRatherThanTimesta = 'Check for disk file'
    +' changes via content rather than timestamp';
  
  // Search dialog
  dlgSearchCaption = 'Searching ...';
  dlgSearchAbort = 'Search terminated by user.';
  dlgSeachDirectoryNotFound = 'Search directory "%s" not found.';
  lissMatches = 'Matches';
  lissSearching = 'Searching';
  lissSearchText = 'Search text';

  dlgDesktop = 'Desktop';
  dlgWindow = 'Window';
  dlgFrmEditor = 'Form Editor';
  dlgObjInsp = 'Object Inspector';
  dlgEnvFiles = 'Files';
  lisIgnoreBinaries = 'Ignore binaries';
  lisSimpleSyntax = 'Simple syntax';
  lisNormallyTheFilterIsARegularExpressionInSimpleSynta = 'Normally the '
    +'filter is a regular expression. In simple syntax a . is a normal '
    +'character, a * stands for anything, a ? stands for any character, and '
    +'comma and semicolon separates alternatives. For example: Simple '
    +'syntax *.pas;*.pp corresponds to ^(.*\.pas|.*\.pp)$';
  lisUseExcludeFilter = 'Use exclude filter';
  lisExcludeFilter = 'Exclude filter';
  lisProjectInformation = 'Project information';
  lisSaveEditorInfoOfNonProjectFiles = 'Save editor info of non project files';
  lisSaveInfoOfClosedEditorFiles = 'Save info of closed editor files';
  lisUseIncludeFilter = 'Use include filter';
  lisIncludeFilter = 'Include filter';
  dlgEnvBckup = 'Backup';
  dlgNaming = 'Naming';
  lisInformation = 'Information';
  lisQuickFixes = 'Quick fixes';
  lisAutoCompletionOn = 'Auto completion: on';
  lisAutoCompletionOff = 'Auto completion: off';
  lisSAMSelectNone = 'Select none';
  lisKMClassic = 'Classic';
  lisKMLazarusDefault = 'Lazarus (default)';
  lisKMMacOSXApple = 'Mac OS X (Apple style)';
  lisKMMacOSXLaz = 'Mac OS X (Lazarus style)';
  lisPEFilename = 'Filename:';
  lisPEUnitname = 'Unitname:';
  lisPVUTheUnitnameIsUsedWhenTheIDEExtendsUsesClauses = 'The unitname is used '
    +'when the IDE extends uses clauses';
  lisPEInvalidUnitFilename = 'Invalid unit filename';
  lisPVUAPascalUnitMustHaveTheExtensionPpOrPas = 'A pascal unit must have the '
    +'extension .pp or .pas';
  lisPEAPascalUnitMustHaveTheExtensionPpOrPas = 'A pascal unit must have the '
    +'extension .pp or .pas';
  lisPEInvalidUnitname = 'Invalid unitname';
  lisPVUTheUnitnameIsNotAValidPascalIdentifier = 'The unitname is not a valid '
    +'pascal identifier.';
  lisPVUUnitnameAndFilenameDoNotMatchExampleUnit1PasAndUni = 'Unitname and '
    +'Filename do not match.%sExample: unit1.pas and Unit1';
  lisPETheUnitnameIsNotAValidPascalIdentifier = 'The unitname is not a valid '
    +'pascal identifier.';
  lisPEConflictFound = 'Conflict found';
  lisPVUThereIsAlreadyAnUnitWithThisNameFile = 'There is already an unit with '
    +'this name.%sFile: %s';
  lisPEThereIsAlreadyAnUnitWithThisNameFile = 'There is already an unit with '
    +'this name.%sFile: %s';
  lisPEUnitnameAndFilenameDoNotMatchExampleUnit1PasAndUni = 'Unitname and '
    +'Filename do not match.%sExample: unit1.pas and Unit1';
  lisCMParameter = 'Parameter';
  lisInsertMacro = 'Insert Macro';
  lisCTPleaseSelectAMacro = 'please select a macro';
  dlgEnvLanguage = 'Language';
  dlgAutoSave = 'Auto Save';
  lisAskBeforeSavingProjectSSession = 'Ask before saving project''s session';
  dlgEdFiles = 'Editor Files';
  dlgEnvProject = 'Tabs for project';
  lisCenterALostWindow = 'Center a lost window';
  lisNumberOfFilesToConvert = 'Number of files to convert: %s';
  lisConvertEncoding = 'Convert Encoding';
  lisConvertProjectOrPackage = 'Convert project or package';
  lisNewEncoding = 'New encoding:';
  lisFileFilter = 'File filter';
  lisFilesInASCIIOrUTF8Encoding = 'Files in ASCII or UTF-8 encoding';
  lisFilesNotInASCIINorUTF8Encoding = 'Files not in ASCII nor UTF-8 encoding';
  podAddPackageUnitToUsesSection = 'Add package unit to uses section';
  lisCodeBrowser = 'Code Browser';
  dlgIntvInSec = 'Interval in secs';
  dlgDesktopFiles = 'Desktop Files';
  dlgSaveDFile = 'Save desktop settings to file';
  dlgLoadDFile = 'Load desktop settings from file';
  dlgSingleTaskBarButton  = 'Show single button in TaskBar';
  dlgHideIDEOnRun = 'Hide IDE windows on run';
  dlgHideMessagesIcons = 'Hide Messages Icons';
  lisIDETitleStartsWithProjectName = 'IDE title starts with project name';
  lisIDEProjectDirInIdeTitle = 'Show project directory in IDE title';
  dlgDesktopHints = 'Hints';
  dlgPalHints = 'Hints for component palette';
  dlgSpBHints = 'Hints for main speed buttons (open, save, ...)';
  dlgDesktopButtons = 'Buttons - ';
  dlgDesktopMenus = 'Menus - ';

  dlgDesktopMisc = 'Misc Options';
  lisSavedSuccessfully = 'Saved successfully';
  lisLoadedSuccessfully = 'Loaded successfully';

  lisEnvJumpFromMessageToSrcOnDblClickOtherwiseSingleClick = 'Jump from '
    +'message to source line on double click (otherwise: single click)';
  dlgWinPos = 'Window positions';
  lisTitleInTaskbarShowsForExampleProject1LpiLazarus = 'Title in taskbar '
    +'shows for example: project1.lpi - Lazarus';
  lisProjectDirectoryIsShowedInIdeTitleBar = 'Title in taskbar '
    +'shows also directory path of the project';

  dlgMainMenu = 'Main Menu';
  dlgSrcEdit = 'Source Editor';
  dlgMsgs = 'Messages';
  dlgProjFiles = 'Project Files';
  dlgEnvType = 'Type';
  dlgEnvNone = 'None';
  dlgSmbFront = 'Symbol in front (.~pp)';
  lisNoBackupFiles = 'No backup files';
  dlgSmbBehind = 'Symbol behind (.pp~)';
  dlgSmbCounter = 'Counter (.pp;1)';
  dlgCustomExt = 'User defined extension (.pp.xxx)';
  dlgBckUpSubDir = 'Same name (in subdirectory)';
  dlgEdCustomExt = 'User defined extension';
  dlgMaxCntr = 'Maximum counter';
  dlgEdBSubDir = 'Sub directory';
  dlgEnvOtherFiles = 'Other Files';
  dlgMaxRecentFiles = 'Max recent files';
  dlgMaxRecentProjs = 'Max recent project files';
  dlgQOpenLastPrj = 'Open last project at start';
  dlgQShowCompileDialog = 'Show compile dialog';
  dlgQAutoCloseCompileDialog = 'Auto close compile dialog';
  dlgLazarusDir = 'Lazarus directory (default for all projects)';
  dlgFpcPath = 'Compiler path (e.g. %s)';
  dlgFpcSrcPath = 'FPC source directory';
  dlgMakePath = 'Make path';
  dlgCompilerMessages = 'Compiler messages language file';
  dlgDebugType = 'Debugger type and path';
  dlgTestPrjDir = 'Directory for building test projects';
  dlgQShowGrid = 'Show grid';
  dlgQShowBorderSpacing = 'Show border spacing';
  dlgGridColor = 'Grid color';
  dlgQSnapToGrid = 'Snap to grid';
  dlgGridX = 'Grid size X';
  dlgGridXHint = 'Horizontal grid step size';
  dlgGridY = 'Grid size Y';
  dlgGridYHint = 'Vertical grid step size';
  dlgGuideLines = 'Show Guide Lines';
  dlgSnapGuideLines = 'Snap to Guide Lines';
  dlgLeftTopClr = 'Guid lines Left,Top';
  dlgRightBottomClr = 'Guide lines Right,Bottom';
  dlgShowCaps = 'Show component captions';
  dlgShowEdrHints = 'Show editor hints';
  dlgrightClickSelects = 'Right click selects';
  lisOpenDesignerOnOpenUnit = 'Open designer on open unit';
  dlgCheckPackagesOnFormCreate = 'Check packages on form create';
  dlgGrabberColor = 'Grabber color';
  dlgMarkerColor = 'Marker color';
  lisFEPaintDesignerItemsOnIdle = 'Reduce designer painting';
  lisFEPaintDesignerItemsOnIdleReduceOverheadForSlowCompu = 'Paint designer '
    +'items only on idle (reduce overhead for slow computers)';
  dlgEnvGrid = 'Grid';
  dlgEnvLGuideLines = 'Guide lines';
  dlgEnvMisc = 'Miscellaneous';
  dlgRuberbandSelectionColor = 'Rubberband Selection';
  dlgRuberbandCreationColor = 'Rubberband Creation';
  dlgRubberbandSelectsGrandChildren = 'Select grandchildren';
  dlgPasExt = 'Default pascal extension';
  dlgCharCaseFileAct = 'Save As - auto rename pascal files lower case';
  
  dlgAmbigFileAct = 'Ambiguous file action:';
  dlgEnvAsk = 'Ask';
  lisNever = 'Never';
  dlgAutoDel = 'Auto delete file';
  dlgAutoRen = 'Auto rename file lowercase';
  dlgnoAutomaticRenaming = 'No automatic renaming';
  lisWhenAUnitIsRenamedUpdateReferences = 'When a unit is renamed, update references';
  lisAlways = 'Always';
  dlgAmbigWarn = 'Warn on compile';
  dlgIgnoreVerb = 'Ignore';
  lisAlwaysIgnore = 'Always ignore';
  // OI colors
  dlgBackColor = 'Background';
  dlgSubPropColor = 'SubProperties';
  dlgReferenceColor = 'Reference';
  dlgValueColor = 'Value';
  lisUnableToAddSetting = 'Unable to add setting';
  lisAllBuildModes = '<All build modes>';
  lisNameOfActiveBuildMode = 'Name of active build mode';
  lisIsAGroupASettingCanOnlyBeAddedToNormalBuildModes = '%s is a group. A '
    +'setting can only be added to normal build modes.';
  lisPleaseSelectABuildModeFirst = 'Please select a build mode first.';
  lisNewBuildMode = 'New build mode';
  lisNewSetting = 'New setting';
  dlfReadOnlyColor = 'Read Only';
  dlgHighlightColor = 'Highlight Color';
  dlgHighlightFontColor = 'Highlight Font Color';
  dlgDefValueColor = 'Default Value';
  dlgPropNameColor = 'Property Name';
  dlgGutterEdgeColor = 'Gutter Edge Color';

  liswlProperties = '&Properties';
  liswlDIsableAll = 'D&isable All';
  liswlENableAll = 'E&nable All';
  liswlDeLeteAll = 'De&lete All';
  liswlInspectPane = 'Inspect pane';

  dlgOIMiscellaneous = 'Miscellaneous';
  dlgOISpeedSettings = 'Speed settings';
  dlgOIOptions = 'Options';
  dlgOIItemHeight = 'Item height';
  dlgOIUseDefaultLazarusSettings = 'Use default Lazarus settings';
  dlgOIUseDefaultDelphiSettings = 'Use default Delphi settings';
  lisShowComponentTreeInObjectInspector = 'Show component tree';
  lisShowHintsInObjectInspector = 'Show hints';
  lisAutoShowObjectInspector = 'Auto show';
  lisBoldNonDefaultObjectInspector = 'Bold non default values';
  lisDrawGridLinesObjectInspector = 'Draw grid lines';
  lisShowGutterInObjectInspector = 'Show gutter';
  lisShowStatusBarInObjectInspector = 'Show status bar';
  lisShowInfoBoxInObjectInspector = 'Show information box';
  dlgEnvBackupHelpNote = 'Notes: Project files are all files in the project directory';
  lisEnvOptDlgInvalidDebuggerFilename = 'Invalid debugger filename';
  lisEnvOptDlgInvalidDebuggerFilenameMsg = 'The debugger file "%s" is not an executable.';
  lisEnvOptDlgDirectoryNotFound = 'Directory not found';
  lisDirectoryNotFound = 'Directory %s%s%s not found.';
  lisRemoveFromSearchPath = 'Remove from search path';
  lisTheDirectoryWasNotFound = 'The directory %s was not found.';
  lisInstallationFailed = 'Installation failed';
  lisPkgMangThePackageFailedToCompileRemoveItFromTheInstallati = 'The package %'
    +'s%s%s failed to compile.%sRemove it from the installation list?';
  lisEnvOptDlgTestDirNotFoundMsg = 'Test directory "%s" not found.';

  // editor options
  dlgEdMisc = 'Misc';
  dlgEdTabIndent = 'Tab and Indent';
  dlgEdDisplay = 'Display';
  lisEOTabWidths = 'Tab widths';
  dlgKeyMapping = 'Key Mappings';
  dlgKeyMappingErrors = 'Key mapping errors';
  dlgEdBack = 'Back';
  dlgReport = 'Report';
  dlgEdNoErr = 'No errors in key mapping found.';
  dlgDelTemplate = 'Delete template ';
  dlgChsCodeTempl = 'Choose code template file (*.dci)';
  dlgAllFiles = 'All files';
  lisExecutable = 'Executable';
  lisEditorFileTypes = 'Editor file types';
  lisPkgMgrNew = 'new';
  lisPkgMgrRemove = 'remove';
  lisPkgMgrKeep = 'keep';
  lisConfirmNewPackageSetForTheIDE = 'Confirm new package set for the IDE';
  lisConfirmPackageNewPackageSet = 'New package set';
  lisConfirmPackageOldPackageSet = 'Old package set';
  lisConfirmPackageAction = 'Action';
  lisSaveFileAs = 'Save file as';
  lisOpenExistingFile = 'Open existing file';
  lisLazarusUnit = 'Lazarus unit';
  lisLazarusInclude = 'Lazarus include file';
  lisLazarusProject = 'Lazarus project';
  lisLazarusForm = 'Lazarus form';
  lisLazarusPackage = 'Lazarus package';
  lisLazarusProjectSource = 'Lazarus project source';
  lisLazarusOtherFile = 'Lazarus other file';

  dlgUndoGroupOptions = 'Undo / Redo';
  dlgScrollGroupOptions = 'Scrolling';
  dlgIndentsTabsGroupOptions = 'Tabs';
  dlgIndentsIndentGroupOptions = 'Indent';
  dlgCommentIndentGroupOptions = 'Comments';
  dlgMouseGroupOptions = 'Mouse:';
  dlgCursorGroupOptions = 'Cursor';
  dlgBlockGroupOptions = 'Selection';
  dlgAlwaysVisibleCursor = 'Always visible cursor';
  dlgAutoIndent = 'Auto indent';
  dlgAutoIndentLink = '(Setup smart indent)';
  dlgAutoHideCursor  = 'Hide mouse when typing';
  dlgGroupUndo = 'Group Undo';
  dlgHalfPageScroll = 'Half page scroll';
  dlgKeepCursorX = 'Keep cursor X position';
  dlgPersistentCursor = 'Persistent cursor';
  dlgPersistentBlock = 'Persistent block';
  dlgOverwriteBlock = 'Overwrite block';
  dlgCursorSkipsSelection = 'Cursor skips selection';
  dlgCursorSkipsTab = 'Cursor skips tabs';
  dlgScrollByOneLess = 'Scroll by one less';
  dlgScrollPastEndFile = 'Scroll past end of file';
  dlgScrollPastEndLine = 'Caret past end of line';
  dlgScrollHint = 'Show scroll hint';
  lisShowSpecialCharacters = 'Show special characters';
  dlgCloseButtonsNotebook = 'Show close buttons in notebook';
  dlgCtrlMiddleTabCloseOtherPages = 'Ctrl-middle-click on tab closes all others';
  dlgHideSingleTabInNotebook = 'Hide tab in single page windows';
  dlgTabNumbersNotebook = 'Show tab numbers in notebook';
  dlgNotebookTabPos = 'Source notebook tabs position';
  lisNotebookTabPosTop = 'Top';
  lisNotebookTabPosBottom = 'Bottom';
  lisNotebookTabPosLeft = 'Left';
  lisNotebookTabPosRight = 'Right';
  dlgUseTabsHistory = 'Use tab history when closing tabs';
  dlgShowScrollHint = 'Show scroll hint';
  dlgShowGutterHints = 'Show gutter hints';
  dlgSmartTabs = 'Smart tabs';
  dlgTabsToSpaces = 'Tabs to spaces';
  dlgTabIndent = 'Tab indents blocks';
  dlgTrimTrailingSpaces = 'Trim trailing spaces';
  dlgAnsiCommentTab = 'Ansi (* *)';
  dlgCurlyCommentTab = 'Curly { }';
  dlgSlashCommentTab = 'Slash //';
  dlgStringBreakIndentTab = 'String ''''';

  dlgCommentContinue = 'Prefix comments on linebreak';
  dlgCommentContinueMatch  = 'Match current line';
  dlgCommentContinuePrefix = 'Prefix new line';
  dlgCommentAlignMaxDefault = 'Make default indent for new line if comment opens at column:';
  dlgCommentAlignMaxToken   = 'Limit indent to';
  dlgCommentContinueMatchText = 'Match text after token "%s"';
  dlgCommentContinueMatchToken = 'Match text including token "%s"';
  dlgCommentContinueMatchLine = 'Match whole line';
  dlgCommentContinueMatchAsterisk = 'Match text including "*" of token "(*"';
  dlgCommentContinuePrefixIndDefault = 'Align Prefix at indent of previous line';
  dlgCommentContinuePrefixIndMatch = 'Align Prefix below start of comment on first comment line';
  dlgCommentContinuePrefixIndNone = 'Do not indent prefix';
  dlgCommentShlashExtendMatch = 'Extend, if matched';
  dlgCommentShlashExtendMatchSplit = 'Extend, if matched and caret in the middle of text (not at EOL)';
  dlgCommentShlashExtendAlways = 'Extend, if matched or not matched';
  dlgCommentShlashExtendAlwaysSplit = 'Extend, if matched or not matched (not at EOL)';
  dlgStringEnableAutoContinue = 'Extend strings on linebreak';
  dlgStringAutoAppend = 'Append text to close string';
  dlgStringAutoPrefix = 'Prefix string on new line';

  dlgUndoAfterSave = 'Undo after save';
  dlgFindTextatCursor = 'Find text at cursor';
  dlgUseSyntaxHighlight = 'Use syntax highlight';
  dlgUseCodeFolding = 'Code Folding';
  dlgCodeFoldEnableFold = 'Fold';
  dlgCodeFoldEnableHide = 'Hide';
  dlgCodeFoldEnableBoth = 'Both';
  dlgCodeFoldPopUpOrder = 'Reverse fold-order in Popup';
  dlgCodeFoldingMouse = 'Mouse';
  dlfMousePredefinedScheme = 'Use predefined scheme';
  dlfNoPredefinedScheme = '< None >';
  dlfMouseSimpleGenericSect = 'General';
  dlfMouseSimpleGutterSect = 'Gutter';
  dlfMouseSimpleGutterLeftDown = 'Standard, All actions (breakpoint, fold) on mouse down';
  dlfMouseSimpleGutterLeftUp = 'Extended, Actions (breakpoint, fold) on mouse up. Selection on mouse down and move';
  dlfMouseSimpleTextSect = 'Text';
  dlfMouseSimpleTextSectAlt = 'Alt-Key sets column mode';
  dlfMouseSimpleTextSectDrag = 'Drag selection (copy/paste)';
  dlfMouseSimpleRightMoveCaret = 'Right mouse includes caret move';
  dlfMouseSimpleTextSectMidLabel = 'Middle Button';
  dlfMouseSimpleTextSectWheelLabel = 'Wheel';
  dlfMouseSimpleTextSectRightLabel = 'Right Button';
  dlfMouseSimpleTextSectExtra1Label = 'Extra-1 Button';
  dlfMouseSimpleTextSectExtra2Label = 'Extra-2 Button';
  dlfMouseSimpleTextSectCtrlWheelLabel = 'Ctrl Wheel';
  dlfMouseSimpleTextSectAltWheelLabel = 'Alt Wheel';
  dlfMouseSimpleTextShiftSectWheelLabel = 'Shift Wheel';
  dlfMouseSimpleTextSectAltCtrlWheelLabel = 'Alt-Ctrl Wheel';
  dlfMouseSimpleTextSectShiftAltWheelLabel = 'Shift-Alt Wheel';
  dlfMouseSimpleTextSectShiftCtrlWheelLabel = 'Shift-Ctrl Wheel';
  dlfMouseSimpleTextSectShiftAltCtrlWheelLabel = 'Shift-Alt-Ctrl';

  dlfMouseSimpleTextSectPageLMod = 'Left 1';
  dlfMouseSimpleTextSectPageLMulti = 'Left 2';
  dlfMouseSimpleTextSectPageBtn = 'Middle';
  dlfMouseSimpleTextSectPageWheel = 'Wheel';
  dlfMouseSimpleTextSectPageRight = 'Right';
  dlfMouseSimpleTextSectPageExtra1 = 'Extra 1';
  dlfMouseSimpleTextSectPageExtra2 = 'Extra 2';

  dlfMouseSimpleTextSectLDoubleLabel      = 'Double';
  dlfMouseSimpleTextSectLTripleLabel      = 'Triple';
  dlfMouseSimpleTextSectLQuadLabel        = 'Quad';
  dlfMouseSimpleTextSectLDoubleShiftLabel = 'Shift Double';
  dlfMouseSimpleTextSectLDoubleAltLabel   = 'Alt Double';
  dlfMouseSimpleTextSectLDoubleCtrlLabel  = 'Ctrl Double';
  dlfMouseSimpleTextSectShiftLabel        = 'Shift Button';
  dlfMouseSimpleTextSectAltLabel          = 'Alt Button';
  dlfMouseSimpleTextSectCtrlLabel         = 'Ctrl Button';
  dlfMouseSimpleTextSectAltCtrlLabel      = 'Alt-Ctrl Button';
  dlfMouseSimpleTextSectShiftAltLabel     = 'Shift-Alt Button';
  dlfMouseSimpleTextSectShiftCtrlLabel    = 'Shift-Ctrl Button';
  dlfMouseSimpleTextSectShiftAltCtrlLabel = 'Shift-Alt-Ctrl Button';

  dlfMouseSimpleButtonNothing          = 'Nothing/Default';
  dlfMouseSimpleButtonSelContinuePlain = 'Continue %0:s';
  dlfMouseSimpleButtonSelContinue      = 'Continue %0:s (Bound to: %1:s)';
  dlfMouseSimpleButtonSelect           = 'Select text';
  dlfMouseSimpleButtonSelectColumn     = 'Select text (Columns)';
  dlfMouseSimpleButtonSelectLine       = 'Select text (Lines)';
  dlfMouseSimpleButtonSetWord          = 'Select current Word';
  dlfMouseSimpleButtonSetLineSmart     = 'Select current Line (Text)';
  dlfMouseSimpleButtonSetLineFull      = 'Select current Line (Full)';
  dlfMouseSimpleButtonSetPara          = 'Select current Paragraph';
  dlfMouseSimpleButtonPaste            = 'Paste';
  dlfMouseSimpleButtonDeclaration      = 'Jumps to implementation';
  dlfMouseSimpleButtonDeclarationBlock = 'Jumps to implementation/other block end';
  dlfMouseSimpleButtonAddHistoryPoint  = 'Add history point';
  dlfMouseSimpleButtonHistBack = 'History back';
  dlfMouseSimpleButtonHistForw = 'History forward';
  dlfMouseSimpleButtonSetFreeBookmark  = 'Set free bookmark';
  dlfMouseSimpleButtonZoomReset        = 'Reset zoom';
  dlfMouseSimpleButtonContextMenu      = 'Context Menu';
  dlfMouseSimpleButtonContextMenuDbg   = 'Context Menu (debug)';
  dlfMouseSimpleButtonContextMenuTab   = 'Context Menu (tab)';

  dlfMouseSimpleWheelNothing           = 'Nothing/Default';
  dlfMouseSimpleWheelSrollDef          = 'Scroll (System speed)';
  dlfMouseSimpleWheelSrollLine         = 'Scroll (Single line)';
  dlfMouseSimpleWheelSrollPage         = 'Scroll (Page)';
  dlfMouseSimpleWheelSrollPageLess     = 'Scroll (Page, less one line)';
  dlfMouseSimpleWheelSrollPageHalf     = 'Scroll (Half page)';
  dlfMouseSimpleWheelHSrollDef         = 'Scroll horizontal (System speed)';
  dlfMouseSimpleWheelHSrollLine        = 'Scroll horizontal (Single line)';
  dlfMouseSimpleWheelHSrollPage        = 'Scroll horizontal (Page)';
  dlfMouseSimpleWheelHSrollPageLess    = 'Scroll horizontal (Page, less one line)';
  dlfMouseSimpleWheelHSrollPageHalf    = 'Scroll horizontal (Half page)';
  dlfMouseSimpleWheelZoom              = 'Zoom';

  dlfMouseSimpleWarning = 'You have unsaved changes. Using this page will undo changes made on the advanced page';
  dlfMouseSimpleDiff = 'This page does not represent your current settings. See advanced page. Use this page to reset any advanced changes';
  dlfMouseResetAll = 'Reset all settings';
  dlfMouseResetText = 'Reset all text settings';
  dlfMouseResetGutter = 'Reset all gutter settings';

  dlgMouseOptions = 'Mouse';
  dlgMouseOptionsAdv = 'Advanced';
  dlgMouseOptNodeAll = 'All';
  dlgMouseOptNodeMain = 'Text';
  dlgMouseOptNodeSelect = 'Selection';
  dlgMouseOptNodeGutter = 'Gutter';
  dlgMouseOptNodeGutterFold = 'Fold Tree';
  dlgMouseOptNodeGutterFoldCol = 'Collapsed [+]';
  dlgMouseOptNodeGutterFoldExp = 'Expanded [-]';
  dlgMouseOptNodeGutterLines = 'Line Numbers';
  dlgMouseOptHeadOrder = 'Order';
  dlgMouseOptHeadContext = 'Context';
  dlgMouseOptHeadDesc = 'Action';
  dlgMouseOptHeadBtn = 'Button';
  dlgMouseOptHeadCount = 'Click';
  dlgMouseOptHeadDir = 'Up/Down';
  dlgMouseOptHeadShift = 'Shift';
  dlgMouseOptHeadAlt = 'Alt';
  dlgMouseOptHeadCtrl = 'Ctrl';
  dlgMouseOptHeadCaret = 'Caret';
  dlgMouseOptHeadPriority = 'Priority';
  dlgMouseOptHeadOpt = 'Option';
  dlgMouseOptBtnLeft   = 'Left';
  dlgMouseOptBtnMiddle = 'Middle';
  dlgMouseOptBtnRight  = 'Right';
  dlgMouseOptBtnExtra1 = 'Extra 1';
  dlgMouseOptBtnExtra2 = 'Extra 2';
  dlgMouseOptBtnWheelUp = 'Wheel up';
  dlgMouseOptBtnWheelDown = 'Wheel down';
  dlgMouseOptBtn1   = 'Single';
  dlgMouseOptBtn2   = 'Double';
  dlgMouseOptBtn3   = 'Triple';
  dlgMouseOptBtn4   = 'Quad';
  dlgMouseOptBtnAny = 'Any';
  dlgMouseOptMoveMouseTrue   = 'Y';
  dlgMouseOptMoveMouseFalse  = '';
  dlgMouseOptModKeyFalse   = 'n';
  dlgMouseOptModKeyTrue    = 'Y';
  dlgMouseOptModKeyIgnore  = '-';
  dlgMouseOptCheckUpDown   = 'Act on Mouse up';
  dlgMouseOptModShift = 'Shift';
  dlgMouseOptModAlt   = 'Alt';
  dlgMouseOptModCtrl  = 'Ctrl';
  dlgMouseOptOtherAct  = 'Other actions using the same button';
  dlgMouseOptOtherActHint  = 'They may be executed depending on the Modifier Keys, Fallthrough settings, Single/Double, Up/Down ...';
  dlgMouseOptOtherActToggle = 'Filter Mod-Keys';
  lisDoNotShowThisMessageAgain = 'Do not show this message again';
  dlgMouseOptBtnModDef = 'Make Fallback';
  dlgMouseOptPriorLabel = 'Priority';
  dlgMouseOptOpt2Label = 'Opt';
  dlgMouseOptDlgTitle = 'Edit Mouse';
  dlgMouseOptCapture = 'Capture';
  dlgMouseOptCaretMove = 'Move Caret (extra)';
  dlgMouseOptErrorDup = 'Duplicate Entry';
  dlgMouseOptErrorDupText = 'This entry conflicts with an existing entry';
  dlgMouseOptDescAction = 'Action';
  dlgMouseOptDescButton = 'Click';
  dlgMouseOptionsynCommand = 'IDE-Command';
  dlgUseDividerDraw = 'Divider Drawing';
  dlgEditorOptions = 'Editor options';
  dlgCopyWordAtCursorOnCopyNone = 'Copy word on copy none';
  dlgHomeKeyJumpsToNearestStart = 'Home key jumps to nearest start';
  dlgEndKeyJumpsToNearestStart = 'End key jumps to nearest end';
  dlgColorLink = '(Edit Color)';
  dlgKeyLink = '(Edit Key)';
  dlgBracketHighlight = 'Bracket highlight';
  dlgNoBracketHighlight = 'No Highlight';
  dlgHighlightLeftOfCursor = 'Left Of Cursor';
  dlgHighlightRightOfCursor = 'Right Of Cursor';
  gldHighlightBothSidesOfCursor = 'On Both Sides';
  dlgBlockIndentKeys = 'Block indent';
  dlgBlockIndentLink = '(edit keys)';
  dlgBlockIndent = 'Block indent (spaces)';
  dlgBlockTabIndent = 'Block indent (tabs)';
  dlgAutoIndentType = 'Auto indent';
  dlgBlockIndentType = 'Indent method';
  dlgBlockIndentTypeSpace = 'Spaces';
  dlgBlockIndentTypeCopy = 'Space/tab as prev Line';
  dlgBlockIndentTypePos = 'Position only';
  dlgTrimSpaceTypeCaption = 'Trim spaces style';
  dlgTrimSpaceTypeLeaveLine = 'Leave line';
  dlgTrimSpaceTypeEditLine = 'Line Edited';
  dlgTrimSpaceTypeCaretMove = 'Caret or Edit';
  dlgTrimSpaceTypePosOnly = 'Position Only';
  dlgCopyPasteKeepFolds = 'Copy/Paste with fold info';
  dlgUseMinimumIme = 'Ime handled by System';
  dlgUndoLimit = 'Undo limit';
  dlgTabWidths = 'Tab widths';
  dlgMarginGutter = 'Margin and gutter';
  dlgVisibleRightMargin = 'Visible right margin';
  dlgVisibleGutter = 'Visible gutter';
  dlgGutterSeparatorIndex = 'Gutter separator index';
  dlgShowLineNumbers = 'Show line numbers';
  dlgShowCompilingLineNumbers = 'Show line numbers';
  dlgRightMargin = 'Right margin';
  dlgGutter = 'Gutter';
  dlgGutterWidth = 'Gutter width';
  dlgGutterColor = 'Gutter Color';
  dlgEditorFont = 'Editor font';
  dlgDefaultEditorFont='Default editor font';
  dlgEditorFontSize = 'Editor font size';
  dlgExtraCharSpacing = 'Extra char spacing';
  dlgExtraLineSpacing = 'Extra line spacing';
  dlgDisableAntialiasing = 'Disable anti-aliasing';
  dlgKeyMappingScheme = 'Key Mapping Scheme';
  dlgCheckConsistency = 'Check consistency';
  lisEdOptsLoadAScheme = 'Load a scheme';
  lisFindKeyCombination = 'Find key combination';
  lisSelectedCommandsMapping = 'Selected Command''s Mapping';
  lisNowLoadedScheme = 'Now loaded: ';
  dlgLang = 'Language';
  dlgEditSchemDefaults = 'Scheme globals';
  lis0No1DrawDividerLinesOnlyForTopLevel2DrawLinesForFi = '0 = no, 1 = draw '
    +'divider lines only for top level, 2 = draw lines for first two levels, ...';
  dlgClrScheme = 'Color Scheme';
  dlgFileExts = 'File extensions';
  dlgSetElementDefault = 'Set element to default';
  dlgSetAllElementDefault = 'Set all elements to default';
  dlgUseSchemeDefaults = 'Use (and edit) global scheme settings';
  dlgUseSchemeLocal    = 'Use local scheme settings';
  dlgColor = 'Color';
  dlgColors = 'Colors';
  dlgColorNotModified = 'Not modified';
  dlgPriorities = 'Priorities';

  dlgForecolor = 'Foreground';
  dlgFrameColor = 'Text-mark';
  dlgUnsavedLineColor = 'Unsaved line';
  dlgSavedLineColor = 'Saved line';
  dlgGutterCollapsedColor = 'Collapsed';
  dlgElementAttributes = 'Element Attributes';
  dlgEdBold = 'Bold';
  dlgEdItal = 'Italic';
  dlgEdUnder = 'Underline';
  dlgEdOn = 'On';
  dlgEdOff = 'Off';
  dlgEdInvert = 'Invert';
  dlgEdIdComlet = 'Identifier completion';
  dlgEdCompleteBlocks = 'Add close statement for pascal blocks';
  lisShowValueHintsWhileDebugging = 'Show value hints while debugging';
  lisDebugHintAutoTypeCastClass = 'Automatic type-cast for objects';
  dlgTooltipEval = 'Tooltip expression evaluation';
  dlgTooltipTools = 'Tooltip symbol Tools';
  dlgMarkupGroup = 'Highlight of Word under Caret';
  dlgBracketMatchGroup = 'Matching bracket pairs';
  dlgPasExtKeywordsGroup = 'Extended Pascal Keyword Options';
  dlgPasExtKeywords = 'Highlight control statements as keywords';
  dlgPasStringKeywords = 'Highlight "String" keyword(s)';
  dlgPasStringKeywordsOptDefault = 'Default';
  dlgPasStringKeywordsOptString = 'Only "String"';
  dlgPasStringKeywordsOptNone = 'None';
  dlgMarkupWordFullLen = 'Match word boundaries for words up to this length:';
  dlgMarkupWordNoKeyword = 'Ignore keywords';
  dlgMarkupWordTrim = 'Trim spaces (when highlighting current selection)';
  dlgMarkupWordNoTimer = 'Disable timer for markup current word';
  dlgAutoRemoveEmptyMethods = 'Auto remove empty methods';
  lisShowDeclarationHints = 'Show declaration hints';
  dlgEdDelay = 'Delay';
  dlgEdDelayInSec = '(%s sec delay)';
  lisDelayForHintsAndCompletionBox = 'Delay for hints and completion box';
  lisDelayForCompletionLongLineHint = 'Delay for long line hints in completion box';
  lisCompletionLongLineHintType = 'Show long line hints';
  lisCompletionLongLineHintTypeNone = 'Never';
  lisCompletionLongLineHintTypeRightOnly = 'Extend right only';
  lisCompletionLongLineHintTypeLittleLeft = 'Extend some left';
  lisCompletionLongLineHintTypeFullLeft = 'Extend far left';
  dlgTimeSecondUnit = 'sec';
  dlgEdAdd = 'Add ...';
  dlgEdEdit = 'Edit ...';
  dlgIndentCodeTo = 'Indent code to';
  //dlgCodeToolsTab = 'Code Tools';
  lisAutomaticFeatures = 'Completion and Hints';
  lisAutoMarkup = 'Markup and Matches';

  dlgMarkupUserDefined = 'User defined markup';
  dlgMarkupUserDefinedNoLists = 'No lists';
  dlgMarkupUserDefinedNoListsSel = 'Select ...';
  dlgMarkupUserDefinedNewName = 'New list';
  dlgMarkupUserDefinedListNew = 'Add list';
  dlgMarkupUserDefinedListDel = 'Delete list';
  dlgMarkupUserDefinedPageMain = 'Main settings';
  dlgMarkupUserDefinedPageKeys = 'Key Settings';
  dlgMarkupUserDefinedMatchCase = 'Case sensitive';
  dlgMarkupUserDefinedMatchStartBound = 'Set bound at term start';
  dlgMarkupUserDefinedMatchEndBound = 'Set bound at term end';
  dlgMarkupUserDefinedDivKeyAdd = 'Add Word or Term';
  dlgMarkupUserDefinedDivKeyRemove = 'Remove Word or Term';
  dlgMarkupUserDefinedDivKeyToggle = 'Toggle Word or Term';
  dlgMarkupUserDefinedDelCaption = 'Delete';
  dlgMarkupUserDefinedDelPrompt = 'Delete list "%s"?';
  dlgMarkupUserDefinedListName = 'Name';
  dlgMarkupUserDefinedNewByKeyOpts = 'Settings for terms added by key';
  dlgMarkupUserDefinedNewByKeyLen = 'Ignore bounds for terms longer than';
  dlgMarkupUserDefinedNewByKeyLenWord = 'current word';
  dlgMarkupUserDefinedNewByKeyLenSelect = 'selection';
  dlgMarkupUserDefinedNewByKeySmartSelect = 'Smart match selection bounds';
  dlgMarkupUserDefinedGlobalList = 'Add/Remove in all editors';
  dlgMarkupUserDefinedDuplicate = 'Duplicate Term';
  dlgMarkupUserDefinedDuplicateMsg = 'The term %s already exists. Duplicates will be removed when the list is saved.';

  lisUserDefinedMarkupKeyGroup = 'User defined text markup';
  lisUserDefinedMarkupKeyAdd = 'Add to list "%s"';
  lisUserDefinedMarkupKeyRemove = 'Remove from list "%s"';
  lisUserDefinedMarkupKeyToggle = 'Toggle on list "%s"';

  dlgMultiWinOptions = 'Pages and Windows';
  dlgMultiWinTabGroup = 'Notebook Tabs';
  dlgMultiWinAccessGroup = 'Find Editor for Jump Targets';
  dlgMultiWinAccessOrder    = 'Order to use for editors matching the same criteria';
  dlgMultiWinAccessOrderEdit= 'Most recent focused editor for this file';
  dlgMultiWinAccessOrderWin = 'Editor (for file) in most recent focused window';
  dlgMultiWinAccessType     = 'Priority list of criteria to choose an editor:';

  dlgDividerOnOff           = 'Draw divider';
  dlgDividerDrawDepth       = 'Draw divider level';
  dlgDividerTopColor        = 'Line color';
  dlgDividerColorDefault    = 'Use right margin color';
  dlgDividerNestColor       = 'Nested line color';

  dlgDivPasUnitSectionName  = 'Unit sections';
  dlgDivPasUsesName         = 'Uses clause';
  dlgDivPasVarGlobalName    = 'Var/Type';
  dlgDivPasVarLocalName     = 'Var/Type (local)';
  dlgDivPasStructGlobalName = 'Class/Struct';
  dlgDivPasStructLocalName  = 'Class/Struct (local)';
  dlgDivPasProcedureName    = 'Procedure/Function';
  dlgDivPasBeginEndName     = 'Begin/End';
  dlgDivPasTryName          = 'Try/Except';

  dlgFoldPasBeginEnd        = 'Begin/End (nested)';
  dlgFoldPasProcBeginEnd    = 'Begin/End (procedure)';
  dlgFoldPasNestedComment   = 'Nested Comment';
  dlgFoldPasProcedure       = 'Procedure';
  dlgFoldPasUses            = 'Uses';
  dlgFoldPasVarType         = 'Var/Type (global)';
  dlgFoldLocalPasVarType    = 'Var/Type (local)';
  dlgFoldPasClass           = 'Class/Object';
  dlgFoldPasClassSection    = 'public/private';
  dlgFoldPasUnitSection     = 'Unit section';
  dlgFoldPasProgram         = 'Program';
  dlgFoldPasUnit            = 'Unit';
  dlgFoldPasRecord          = 'Record';
  dlgFoldPasTry             = 'Try';
  dlgFoldPasExcept          = 'Except/Finally';
  dlgFoldPasRepeat          = 'Repeat';
  dlgFoldPasCase            = 'Case';
  dlgFoldPasAsm             = 'Asm';
  dlgFoldPasIfDef           = '{$IfDef}';
  dlgFoldPasUserRegion      = '{%Region}';
  dlgFoldPasAnsiComment     = 'Comment (* *)';
  dlgFoldPasBorComment      = 'Comment { }';
  dlgFoldPasSlashComment    = 'Comment //';

  dlgFoldLfmObject      = 'Object (inherited, inline)';
  dlgFoldLfmList        = 'List <>';
  dlgFoldLfmItem        = 'Item';

  dlgFoldXmlNode        = 'Node';
  dlgFoldXmlComment     = 'Comment';
  dlgFoldXmlCData       = 'CData';
  dlgFoldXmlDocType     = 'DocType';
  dlgFoldXmlProcess     = 'Processing Instruction';

  dlgFoldHtmlNode        = 'Node';
  dlgFoldHtmlComment     = 'Comment';
  dlgFoldHtmlAsp         = 'ASP';

  dlgFoldDiffChunk     = 'Chunk';
  dlgFoldDiffChunkSect = 'Chunk section';

  dlgMouseFoldExpFoldOne    = 'Fold One (All Expanded)';
  dlgMouseFoldExpFoldAll    = 'Fold All (All Expanded)';
  dlgMouseFoldColFoldOne    = 'Fold One (Some Colapsed)';
  dlgMouseFoldColFoldAll    = 'Fold All (Some Colapsed)';
  dlgMouseFoldColUnFoldOne  = 'Unfold One (Some Colapsed)';
  dlgMouseFoldColUnFoldAll  = 'Unfold All (Some Colapsed)';

  dlgMouseFoldGroup1        = 'Setting 1';
  dlgMouseFoldGroup2        = 'Setting 2';
  dlgMouseFoldButton        = 'Button';
  dlgMouseFoldButtonLeft    = 'Left';
  dlgMouseFoldButtonMiddle  = 'Middle';
  dlgMouseFoldButtonRight   = 'Right';
  dlgMouseFoldModifierShift = 'Shift';
  dlgMouseFoldModifierCtrl  = 'Ctrl';
  dlgMouseFoldModifierAlt   = 'Alt';

  dlgAddHiAttrDefault             = 'Default Text';
  dlgAddHiAttrTextBlock           = 'Text block';
  dlgAddHiAttrExecutionPoint      = 'Execution point';
  dlgAddHiAttrEnabledBreakpoint   = 'Enabled breakpoint';
  dlgAddHiAttrDisabledBreakpoint  = 'Disabled breakpoint';
  dlgAddHiAttrInvalidBreakpoint   = 'Invalid breakpoint';
  dlgAddHiAttrUnknownBreakpoint   = 'Unknown breakpoint';
  dlgAddHiAttrErrorLine           = 'Error line';
  dlgAddHiAttrIncrementalSearch   = 'Incremental search';
  dlgAddHiAttrHighlightAll        = 'Incremental others';
  dlgAddHiAttrBracketMatch        = 'Brackets highlight';
  dlgAddHiAttrMouseLink           = 'Mouse link';
  dlgAddHiAttrLineNumber          = 'Line number';
  dlgAddHiAttrLineHighlight       = 'Current line highlight';
  dlgAddHiAttrModifiedLine        = 'Modified line';
  dlgAddHiAttrCodeFoldingTree     = 'Code folding tree';
  dlgAddHiAttrHighlightWord       = 'Highlight current word';
  dlgAddHiAttrFoldedCode          = 'Folded code marker';
  dlgAddHiAttrWordGroup           = 'Word-Brackets';
  dlgAddHiAttrTemplateEditCur     = 'Active Cell';
  dlgAddHiAttrTemplateEditSync    = 'Syncronized Cells';
  dlgAddHiAttrTemplateEditOther   = 'Other Cells';
  dlgAddHiAttrSyncroEditCur       = 'Active Cell';
  dlgAddHiAttrSyncroEditSync      = 'Syncronized Cells';
  dlgAddHiAttrSyncroEditOther     = 'Other Cells';
  dlgAddHiAttrSyncroEditArea      = 'Selected Area';
  dlgAddHiAttrGutterSeparator     = 'Gutter Separator';
  dlgAddHiSpecialVisibleChars     = 'Visualized Special Chars';
  dlgTopInfoHint                  = 'Current Class/Proc Hint';
  dlgIfDefBlockInactive           = 'Inactive $IFDEF code';
  dlgIfDefBlockActive             = 'Active $IFDEF code';
  dlgIfDefBlockTmpActive          = 'Included mixed state $IFDEF code';
  dlgIfDefNodeInactive            = 'Inactive $IFDEF node';
  dlgIfDefNodeActive              = 'Active $IFDEF node';
  dlgIfDefNodeTmpActive           = 'Included mixed state $IFDEF node';

  dlgAddHiAttrGroupDefault  = 'Global';
  dlgAddHiAttrGroupText     = 'Text';
  dlgAddHiAttrGroupLine     = 'Line';
  dlgAddHiAttrGroupGutter   = 'Gutter';
  dlgAddHiAttrGroupSyncroEdit    = 'Syncron Edit';
  dlgAddHiAttrGroupTemplateEdit  = 'Template Edit';
  dlgAddHiAttrGroupIfDef    = 'IfDef';

  dlgEditAccessCaptionLockedInView            = 'Locked, if text in view';
  dlgEditAccessCaptionUnLockedInSoftView      = 'Unlocked, if text in centered view';
  dlgEditAccessCaptionUnLocked                = 'Unlocked';
  dlgEditAccessCaptionUnLockedOpenNewInOldWin = 'New tab in existing window';
  dlgEditAccessCaptionUnLockedOpenNewInNewWin = 'New tab in new window';
  dlgEditAccessCaptionIgnLockedOldEdit        = 'Ignore Locks, use longest unused editor';
  dlgEditAccessCaptionIgnLockedOnlyActEdit    = 'Ignore Locks, if editor is current';
  dlgEditAccessCaptionIgnLockedOnlyActWin     = 'Ignore Locks, if editor in current window';
  dlgEditAccessCaptionUnLockedOpenNewInAnyWin = 'New tab, existing or new window';

  dlgEditAccessDescLockedInView =
    'This option will use a locked (and only a locked) Editor, '+
    'which does not need to scroll in order to display the target jump point '+
    '(target jump point is already in visible screen area).';
  dlgEditAccessDescUnLockedInSoftView = 'This option will use a not locked Editor, '+
    'which does not need to scroll in order to display the target jump point '+
    '(target jump point is already in visible screen center area, excluding 2-5 lines at the top/bottom).';
  dlgEditAccessDescUnLocked = 'This option will use any not locked Editor.';
  dlgEditAccessDescUnLockedOpenNewInOldWin =
    'If no unlocked tab is found, then this option will open a new Tab in an existing '+
    '(and only in an existing) Window. '+
    'A tab is only opened if a window exists, that has not yet an editor for the target file.';
  dlgEditAccessDescUnLockedOpenNewInNewWin =
    'If no unlocked tab is found, then this option will open a new Tab in a new '+
    'Window (even if other existing windows could be used for the new tab). '+
    'This option will always succeed, further options are never tested.';
  dlgEditAccessDescIgnLockedOldEdit =
    'This option will use the longest unused editor for the file, '+
    'even if it is locked and/or needs scrolling. '+
    'The determination of the longest unused editor does not look at the order in which the windows were focused, '+
    'even if this is set by the setting for "same criteria order". ' +
    'This option will always succeed, further options are never tested.';
  dlgEditAccessDescIgnLockedOnlyActEdit =
    'This option will check if the current active editor has the target file '+
    'and if it is, it will use the current editor, even if it is locked and/or needs scrolling.';
  dlgEditAccessDescIgnLockedOnlyActWin =
    'This option will check if there is an editor for the target file in the current window '+
    'and if there is, it will use this editor, even if it is locked and/or needs scrolling.';
  dlgEditAccessDescUnLockedOpenNewInAnyWin =
    'This option will open a new Tab in an existing or new Window, '+
    'if no unlocked tab is found. '+
    'This option will always succeed, further options are never tested.';

  // CodeTools dialog
  dlgCodeToolsOpts = 'CodeTools Options';
  dlgCodeCreation = 'Code Creation';
  dlgWordsPolicies = 'Words';
  dlgLineSplitting = 'Line Splitting';
  dlgSpaceNotCosmos{:)} = 'Space';
  dlgIdentifierCompletion = 'Identifier Completion';
  dlgAdditionalSrcPath = 'Additional source search path for all projects (.pp;.pas)';
  dlgJumpingETC = 'Jumping (e.g. Method Jumping)';
  dlgAdjustTopLine = 'Adjust top line due to comment in front';
  dlgCenterCursorLine = 'Center cursor line';
  dlgCursorBeyondEOL = 'Cursor beyond EOL';
  dlgSkipForwardClassDeclarations = 'Skip forward class declarations';
  dlgInsertClassParts = 'Insert class parts';
  lisClassCompletion = 'Class Completion';
  dlgAlphabetically = 'Alphabetically';
  dlgCDTLast = 'Last';
  dlgMixMethodsAndProperties = 'Mix methods and properties';
  dlgForwardProcsInsertPolicy = 'Procedure insert policy';
  dlgLast = 'Last (i.e. at end of source)';
  dlgInFrontOfMethods = 'In front of methods';
  dlgBehindMethods = 'Behind methods';
  dlgForwardProcsKeepOrder = 'Keep order of procedures';
  lisNewUnitsAreAddedToUsesSections = 'New units are added to uses sections';
  lisFirst = 'First';
  lisInFrontOfRelated = 'In front of related';
  lisBehindRelated = 'Behind related';
  dlgInsertMethods = 'Insert methods';
  dlgCDTClassOrder = 'Class order';
  dlgKeywordPolicy = 'Keyword policy';
  dlgCDTLower = 'lowercase';
  dlgCDTUPPERCASE = 'UPPERCASE';
  dlg1UP2low = 'Lowercase, first letter up';
  dlgIdentifierPolicy = 'Identifier policy';
  dlgWordExceptions = 'Exceptions';
  dlgPropertyCompletion = 'Property completion';
  lisHeaderCommentForClass = 'Header comment for class';
  lisImplementationCommentForClass = 'Implementation comment for class';
  dlgCompleteProperties = 'Complete properties';
  dlgCDTReadPrefix = 'Read prefix';
  dlgCDTWritePrefix = 'Write prefix';
  dlgCDTStoredPostfix = 'Stored postfix';
  dlgCDTVariablePrefix = 'Variable prefix';
  dlgSetPropertyVariable = 'Set property Variable';
  dlgMaxLineLength = 'Max line length:';
  dlgNotSplitLineFront = 'Do not split line in front of';
  dlgNotSplitLineAfter = 'Do not split line after';
  dlgCDTPreview = 'Preview (max line length = 1)';
  dlgInsSpaceFront = 'Insert space in front of';
  dlgInsSpaceAfter = 'Insert space after';
  dlgWRDPreview = 'Preview';
  dlgAddSemicolon = 'Add semicolon';
  dlgAddAssignmentOperator = 'Add assignment operator :=';
  lisAddKeywordDo = 'Add keyword "do"';

  dlgUserSchemeError = 'Failed to load user-scheme file %s';

  // source editor
  locwndSrcEditor = 'Source Editor';
  
  // compiler options
  dlgCompilerOptions = 'Compiler Options';
  dlgCOSetAsDefault = 'Set compiler options as default';
  lisWhenEnabledTheCurrentOptionsAreSavedToTheTemplateW = 'When enabled the '
    +'current options are saved to the template, which is used when creating '
    +'new projects';
  lisPkgEdRightClickOnTheItemsTreeToGetThePopupmenuWithAllAv = 'Right click '
    +'on the items tree to get the popupmenu with all available package functions.';
  dlgSearchPaths = 'Paths';
  lisIWonderHowYouDidThatErrorInTheBaseDirectory = 'I wonder how you did '
    +'that: Error in the base directory:';
  lisErrorInTheSearchPathForOtherUnitFiles = 'Error in the search path for "'
    +'Other unit files":';
  lisErrorInTheSearchPathForIncludeFiles = 'Error in the search path for "Include files":';
  lisErrorInTheSearchPathForObjectFiles = 'Error in the search path for "Object files":';
  lisErrorInTheSearchPathForLibraries = 'Error in the search path for "Libraries":';
  lisErrorInTheSearchPathForOtherSources = 'Error in the search path for "Other sources":';
  lisErrorInTheCustomLinkerOptionsLinkingPassOptionsToL = 'Error in the '
    +'custom linker options (Linking / Pass options to linker):';
  lisErrorInTheCustomCompilerOptionsOther = 'Error in the custom compiler options (Other):';
  lisErrorInTheUnitOutputDirectory = 'Error in the "unit output directory":';
  lisErrorInTheCompilerFileName = 'Error in the compiler file name:';
  lisErrorInTheDebuggerPathAddition = 'Error in the "Debugger path addition":';
  lisIWonderHowYouDidThatErrorInThe = 'I wonder how you did that. Error in the %s:';
  lisValue3 = 'Value: ';
  dlgCOParsing = 'Parsing';
  dlgCodeGeneration = 'Code Generation';
  dlgCOLinking = 'Linking';
  dlgCOVerbosity = 'Verbosity';
  dlgCOCfgCmpMessages = 'Messages';
  lisChooseAnFPCMessageFile = 'Choose an FPC message file';
  lisFPCMessageFile = 'FPC message file';
  dlgCOOther = 'Other';
  dlgCOInherited = 'Inherited';
  dlgCOCompilation = 'Compilation';
  lisBrowseForCompiler = 'Browse for Compiler (%s)';
  lisUnitOutputDirectory = 'Unit Output directory';
  lisSelectANode = 'Select a node';
  dlgShowCompilerOptions = 'Show compiler options';
  dlgCOOpts = 'Options: ';
  dlgCOAsmStyle = 'Assembler style:';
  lisNoCompilerOptionsInherited = 'No compiler options inherited.';
  lisExcludedAtRunTime = '%s excluded at run time';
  lisAllInheritedOptions = 'All inherited options';
  lisunitPath = 'unit path';
  lisincludePath = 'include path';
  lisobjectPath = 'object path';
  lislibraryPath = 'library path';
  lislinkerOptions = 'linker options';
  liscustomOptions = 'custom options';
  dlgCOAsIs = 'As-Is';
  dlgSyntaxOptions = 'Syntax options';
  dlgCOCOps = 'C style operators (*=, +=, /= and -=)';
  dlgAssertCode = 'Include assertion code';
  dlgLabelGoto = 'Allow LABEL and GOTO';
  dlgCppInline = 'C++ styled INLINE';
  dlgCMacro = 'C style macros (global)';
  dlgBP7Cptb = 'TP/BP 7.0 compatible';
  dlgInitDoneOnly = 'Constructor name must be ''' + 'init' + ''' (destructor must be ''' + 'done' + ''')';
  dlgStaticKeyword = 'Static keyword in objects';
  dlgDeplhiComp = 'Delphi compatible';
  dlgCOAnsiStr = 'Use Ansistrings';
  dlgGPCComp = 'GPC (GNU Pascal Compiler) compatible';
  dlgCOUnitStyle = 'Unit style';
  dlgCOSmartLinkable = 'Smart linkable';
  dlgCORelocatable = 'Relocatable';
  dlgCOChecks = 'Checks';
  dlgCORange = 'Range';
  dlgCOOverflow = 'Overflow';
  dlgCOStack = 'Stack';
  dlgHeapAndStackSize = 'Heap and stack sizes';
  dlgHeapSize = 'Heap size';
  dlgStackSize = 'Stack size';
  dlgCONormal = 'Normal code';
  dlgCOFast = 'Faster code';
  dlgCOSmaller = 'Smaller code';
  dlgTargetProc = 'Target processor';
  dlgTargetPlatform = 'Target platform';
  dlgOptimiz = 'Optimizations';
  dlgCOKeepVarsReg = 'Keep certain variables in registers';
  dlgUncertOpt = 'Uncertain optimizations';
  dlgLevelNoneOpt = 'Level 0 (no extra optimizations)';
  dlgLevel1Opt = 'Level 1 (quick and debugger friendly)';
  dlgLevel2Opt = 'Level 2 (Level 1 + quick optimizations)';
  dlgLevel3Opt = 'Level 3 (Level 2 + slow optimizations)';
  dlgTargetOS = 'Target OS';
  dlgTargetCPUFamily = 'Target CPU family';
  dlgCODebugging = 'Debugging info';
  dlgCODebugging2 = 'Debugging';
  dlgCOGDB = 'Generate debugging info for GDB (slower / increases exe-size)';
  dlgCOSymbolType = 'Choose type of debug info';
  dlgCOSymbolTypeAuto = 'Automatic';
  dlgCOSymbolTypeStabs = 'Stabs';
  dlgCOSymbolTypeDwarf2 = 'Dwarf2';
  dlgCOSymbolTypeDwarf2Set = 'Dwarf with sets';
  dlgCOSymbolTypeDwarf3 = 'Dwarf3 (beta)';
  dlgCODBX = 'Generate debugging info for DBX (slows compiling)';
  dlgLNumsBct = 'Display line numbers in run-time error backtraces';
  dlgCOHeaptrc = 'Use Heaptrc unit (check for mem-leaks)';
  dlgCOValgrind = 'Generate code for valgrind';
  dlgGPROF = 'Generate code for gprof';
  dlgCOStrip = 'Strip symbols from executable';
  dlgExtSymb = 'Use external gdb debug symbols file';
  dlgLinkLibraries = 'Link style';
  dlgLinkSmart = 'Link smart';
  dlgPassOptsLinker = 'Pass options to linker (delimiter is space)';
  lisCOTargetOSSpecificOptions = 'Target OS specific options';
  dlgWin32GUIApp = 'Win32 gui application';
  dlgVerbosity = 'Verbosity during compilation:';
  dlgCOShowErr = 'Show errors';
  dlgShowWarnings = 'Show warnings';
  dlgShowNotes = 'Show notes';
  dlgShowHint = 'Show hints';
  dlgShowGeneralInfo = 'Show general info';
  dlgShowProcsError = 'Show all procs on error';
  dlgShowEverything ='Show everything';
  dlgShowSummary ='Show summary';
  dlgShowDebugInfo = 'Show debug info';
  dlgShowUsedFiles = 'Show used files';
  dlgShowTriedFiles = 'Show tried files';
  dlgShowCompiledProcedures = 'Show compiled procedures';
  dlgShowConditionals = 'Show conditionals';
  dlgShowExecutableInfo = 'Show executable info (Win32 only)';
  dlgShowNothing = 'Show nothing (only errors)';
  dlgWriteFPCLogo = 'Write FPC logo';
  dlgHintsUnused = 'Show hints for unused units in main';
  dlgHintsParameterSenderNotUsed = 'Show hints for parameter "Sender" not used';
  dlgConfigFiles = 'Config files';
  dlgUseFpcCfg = 'Use standard compiler config file (fpc.cfg)';
  dlgUseCustomConfig = 'Use additional compiler config file';
  lisCustomOptions2 = 'Custom options';
  lisCustomOptHint = 'These options are passed directly to the compiler. Macros ' +
                     'are replaced, line breaks are replaced with single spaces.';
  dlgCOConditionals = 'Conditionals';
  dlgStopAfterNrErr = 'Stop after number of errors:';
  dlgOtherUnitFiles = 'Other unit files (-Fu) (delimiter is semicolon):';
  dlgCOIncFiles = 'Include files (-Fi):';
  dlgCOSources = 'Other sources (.pp/.pas files, used only by IDE not by compiler)';
  dlgCOLibraries = 'Libraries (-Fl):';
  dlgCODebugPath = 'Debugger path addition (none):';
  lisCompiler = 'Compiler';
  lisDebugger = 'Debugger';
  lisToFPCPath = 'Path:';
  lisCOSkipCallingCompiler = 'Skip calling compiler';
  lisCOAmbiguousAdditionalCompilerConfigFile = 'Ambiguous additional compiler '
    +'config file';
  lisCOWarningTheAdditionalCompilerConfigFileHasTheSameNa = 'Warning: The '
    +'additional compiler config file has the same name, as one of the '
    +'standard config filenames the Free Pascal compiler is looking for. This '
    +'can result in ONLY parsing the additional config and skipping the '
    +'standard config.';
  lisCOClickOKIfAreSureToDoThat = '%s%sClick OK if you are sure to do that.';
  lisCOCallOn = 'Call on:';
  dlgCOCreateMakefile = 'Create Makefile';
  lisCOExecuteAfter = 'Execute after';
  lisCOExecuteBefore = 'Execute before';
  lisCOCommand = 'Command:';
  lisCOScanForMessages = 'Scan for messages:';
  lisCOScanForFPCMessages = 'Scan for FPC messages';
  lisCOScanForMakeMessages = 'Scan for Make messages';
  lisCOShowAllMessages = 'Show all messages';
  dlgUnitOutp = 'Unit output directory (-FU):';
  lisCOdefault = 'default (%s)';
  dlgButApply = 'Apply';
  dlgCOShowOptions = '&Show Options';
  dlgCOLoadSave = 'Load/Save';
  dlgMainViewForms = 'View Project Forms';
  dlgMainViewUnits = 'View Project Units';
  dlgMainViewFrames = 'View Project Frames';
  dlgMultiSelect = 'Multi Select';

  // check compiler options dialog
  dlgCCOCaption = 'Checking compiler options';
  dlgCCOTest = 'Test';
  dlgCCOResults = 'Results';
  lisCCOCopyOutputToCliboard = 'Copy output to clipboard';
  lisCCOContains = 'contains ';
  lisCCOSpecialCharacters = 'special characters';
  lisCCONonASCII = 'non ASCII';
  lisCCOWrongPathDelimiter = 'wrong path delimiter';
  lisCCOUnusualChars = 'unusual characters';
  lisCCOHasNewLine = 'new line symbols';
  lisCCOInvalidSearchPath = 'Invalid search path';
  lisCCOSkip = 'Skip';
  dlgCCOTestCheckingCompiler = 'Test: Checking compiler ...';
  lisDoesNotExists = '%s does not exists: %s';
  lisCCOInvalidCompiler = 'Invalid compiler';
  lisCCOCompilerNotAnExe = 'The compiler "%s" is not an executable file.%sDetails: %s';
  lisCCOAmbiguousCompiler = 'Ambiguous compiler';
  lisCCOSeveralCompilers = 'There are several Free Pascal Compilers in your path.%s%s%s'
    +'Maybe you forgot to delete an old compiler?';
  dlgCCOTestCheckingFPCConfigs = 'Test: Checking fpc configs ...';
  lisCCONoCfgFound = 'no fpc.cfg found';
  lisCCOMultipleCfgFound = 'multiple compiler configs found: ';
  dlgCCOUsingConfigFile = 'using config file %s';
  dlgCCOTestCompilingEmptyFile = 'Test: Compiling an empty file ...';
  lisCCOInvalidTestDir = 'Invalid Test Directory';
  lisCCOCheckTestDir = 'Please check the Test directory under %s'
    +'Tools -> Options -> Files -> Directory for building test projects';
  lisCCOUnableToCreateTestFile = 'Unable to create Test File';
  lisCCOUnableToCreateTestPascalFile = 'Unable to create Test pascal file "%s".';
  dlgCCOTestToolCompilingEmptyFile = 'Test: Compiling an empty file';
  lisCCORelUnitPathFoundInCfg = 'relative unit path found in fpc cfg: %s';
  dlgCCOTestCheckingCompilerConfig = 'Test: Checking compiler configuration ...';
  lisCCOMsgPPUNotFound = 'compiled FPC unit not found: %s.ppu';
  lisCCOMissingUnit = 'Missing unit';
  lisCCOPPUNotFoundDetailed = 'The compiled FPC unit %s.ppu was not found.%s'
    +'This typically means your fpc.cfg has a bug. Or your FPC installation is broken.';
  dlgCCOTestMissingPPU = 'Test: Checking missing fpc ppu ...';
  dlgCCOTestCompilerDate = 'Test: Checking compiler date ...';
  lisCCOErrorCaption = 'Error';
  lisUnableToOpen = 'Unable to open "%s"';
  lisCompilerDoesNotSupportTarget = 'Compiler "%s" does not support target %s-%s';
  lisInvalidMode = 'Invalid mode %s';
  lisTheProjectCompilerOptionsAndTheDirectivesInTheMain = 'The project '
    +'compiler options and the directives in the main source differ. For the '
    +'new unit the mode and string type of the project options are used:';
  lisThereIsAlreadyAnIDEMacroWithTheName = 'There is already an IDE macro '
    +'with the name "%s"';
  lisInvalidLineColumnInMessage = 'Invalid line, column in message%s%s';
  lisUnableToLoadFile = 'Unable to load file:%s%s';
  lisQuickFixRemoveUnit = 'Quick fix: Remove unit';
  lisQuickFixCreateLocalVariable = 'Create local variable';
  lisQuickFixSearchIdentifier = 'Search identifier';
  lisMessageContainsNoFilePositionInformation = 'Message contains no file '
    +'position information:%s%s';
  lisFailedToCreateApplicationBundleFor = 'Failed to create Application '
    +'Bundle for "%s"';
  lisThisProjectHasNoMainSourceFile = 'This project has no main source file';
  lisErrorLoadingFile2 = 'Error loading file "%s":%s%s';
  lisNoneClickToChooseOne = 'none, click to choose one';
  lisTreeNeedsRefresh = 'Tree needs refresh';
  lisEMDEmtpyMethods = 'Emtpy Methods';
  lisEMDSearchInTheseClassSections = 'Search in these class sections:';
  lisUnableToLoadPackage = 'Unable to load package %s%s%s';
  lisSAMThisMethodCanNotBeOverriddenBecauseItIsDefinedInTh = 'This method can '
    +'not be overridden because it is defined in the current class';
  lisSAMIsAnAbstractClassItHasAbstractMethods = '%s is an abstract class, it '
    +'has %s abstract methods.';
  lisSAMAbstractMethodsOf = 'Abstract methods of %s';
  lisSAMThereAreAbstractMethodsToOverrideSelectTheMethodsF = 'There are %s '
    +'abstract methods to override.%sSelect the methods for which stubs '
    +'should be created:';
  lisSAMNoAbstractMethodsFound = 'No abstract methods found';
  lisSAMCursorIsNotInAClassDeclaration = 'Cursor is not in a class declaration';
  lisSAMIDEIsBusy = 'IDE is busy';
  lisSAMThereAreNoAbstractMethodsLeftToOverride = 'There are no abstract '
    +'methods left to override.';
  lisSAMUnableToShowAbstractMethodsOfTheCurrentClassBecaus = 'Unable to show '
    +'abstract methods of the current class, because';
  lisCCOUnableToGetFileDate = 'Unable to get file date of %s.';
  lisCCOWarningCaption = 'Warning';
  lisThePathOfMakeIsNotCorrect = 'The path of "make" is not correct: "%s"';
  lisTheCompilerFileDoesNotLookCorrect = 'The compiler file "%s" does not look'
    +' correct:%s%s';
  lisTheFPCSourceDirectoryDoesNotLookCorrect = 'The FPC source directory "%s" '
    +'does not look correct:%s%s';
  lisTheLazarusDirectoryDoesNotLookCorrect = 'The Lazarus directory "%s" does '
    +'not look correct:%s%s';
  lisTheContainsANotExistingDirectory = 'The %s contains a not existing '
    +'directory:%s%s';
  lisTheProjectDoesNotUseTheLCLUnitInterfacesButItSeems = 'The project does '
    +'not use the LCL unit interfaces, which is required by LCLBase.%sYou will '
    +'get strange linker errors if you use the LCL without interfaces.';
  lisAddUnitInterfaces = 'Add unit interfaces';
  lisCCODatesDiffer = 'The dates of the .ppu files of FPC'
    +' differ more than one hour.%s'
    +'This can mean, they are from two different installations.%s'
    +'File1: %s%s'
    +'File2: %s';
  lisCCOPPUOlderThanCompiler = 'There is a .ppu file older than the compiler itself:%s%s';
  lisCCOPPUExistsTwice = 'ppu exists twice: %s, %s';
  dlgCCOTestSrcInPPUPaths = 'Test: Checking sources in fpc ppu search paths ...';
  lisCCOFPCUnitPathHasSource = 'FPC unit path contains a source: ';
  lisTheOutputDirectoryOfIsListedInTheUnitSearchPathOf = 'The output '
    +'directory of %s is listed in the unit search path of %s.';
  lisTheOutputDirectoryShouldBeASeparateDirectoryAndNot = ' The output '
    +'directory should be a separate directory and not contain any source files.';
  dlgCCOOrphanedFileFound = 'orphaned file found: %s';
  lisTheOutputDirectoryOfIsListedInTheIncludeSearchPath = 'The output '
    +'directory of %s is listed in the include search path of %s.';
  lisTheOutputDirectoryOfIsListedInTheInheritedUnitSear = 'The output '
    +'directory of %s is listed in the inherited unit search path of %s.';
  lisTheOutputDirectoryOfIsListedInTheInheritedIncludeS = 'The output '
    +'directory of %s is listed in the inherited include search path of %s.';
  lisCCOTestsSuccess = 'All tests succeeded.';
  lisCCOWarningMsg = 'WARNING: ';
  lisCCOHintMsg = 'HINT: ';
  lisCCOErrorMsg = 'ERROR: ';
  
  // custom messages
  dlgBrowseMsgFilter = 'Free Pascal Compiler messages file (*.msg)|*.msg|Any Files (*.*)|*.*';
  dlgCompilerMessage = 'Compiler messages';
  dlgUseMsgFile = 'Use messages file'; //deprecated

  // project options dialog
  dlgProjectOptions = 'Project Options';
  dlgProjectOptionsFor = 'Options for Project: %s';
  dlgPOApplication = 'Application';
  dlgPOFroms = 'Forms';
  dlgPOMisc = 'Miscellaneous';
  dlgPOI18n = 'i18n';
  rsEnableI18n = 'Enable i18n';
  lisEnableInternationalizationAndTranslationSupport = 'Enable internationaliza'
    +'tion and translation support';
  rsI18nOptions = 'i18n Options';
  rsPOOutputDirectory = 'PO Output Directory:';
  lisDirectoryWhereTheIDEPutsThePoFiles = 'Directory where the IDE puts the .'
    +'po files';
  lisCreateUpdatePoFileWhenSavingALfmFile = 'Create/update .po file when '
    +'saving a lfm file';
  lisYouCanDisableThisForIndividualFormsViaThePackageEd = 'You can disable '
    +'this for individual forms via the package editor';
  lisYouCanDisableThisForIndividualFormsViaThePopupMenu = 'You can disable '
    +'this for individual forms via the popup menu in the project inspector';
  rsIncludeVersionInfoInExecutable = 'Include version info in executable';
  rsVersionNumbering = 'Version numbering';
  rsMajorVersion = '&Major version:';
  rsMinorVersion = 'Mi&nor version:';
  rsRevision = '&Revision:';
  rsBuild = '&Build:';
  rsAutomaticallyIncreaseBuildNumber = 'Automatically increase build number';
  rsLanguageOptions = 'Language options';
  rsLanguageSelection = 'Language selection:';
  rsCharacterSet = 'Character set:';
  rsOtherInfo = 'Other info';
  dlgPOSaveSession = 'Session';
  dlgApplicationSettings = 'Application settings';
  dlgPOTitle = 'Title:';
  dlgPOOutputSettings = 'Output settings';
  dlgPOTargetFileName = 'Target file name:';
  lisTargetFileNameEmptyUseUnitOutputDirectory = 'Target file name: (-o, empty = '
    +'use unit output directory)';
  lisHint = 'Hint';
  lisTheContainsAStarCharacterLazarusUsesThisAsNormalCh = 'The %s contains a '
    +'star * character.%sLazarus uses this as normal character and does not '
    +'expand this as file mask.';
  lisDuplicateSearchPath = 'Duplicate search path';
  lisTheOtherSourcesContainsADirectoryWhichIsAlreadyInT = 'The "Other sources" '
    +'contains a directory which is already in the "Other unit files".%s%s';
  lisRemoveThePathsFromOtherSources = 'Remove the paths from "Other sources"';
  lisTargetFileNameO = 'Target file name (-o):';
  dlgPOUseAppBundle = 'Use Application Bundle for running and debugging (Darwin only)';
  dlgPOCreateAppBundle = 'Create Application Bundle';
  dlgPOUseManifest = 'Use manifest file to enable themes (Windows only)';
  dlgPODpiAware = 'Enabled DPI Awareness (for Vista+)';
  dlgPOUIAccess = 'UI Access (uiAccess)';
  dlgPOAsInvoker = 'as invoker (asInvoker)';
  dlgPOHighestAvailable = 'highest available (highestAvailable)';
  dlgPORequireAdministrator = 'require administrator (requireAdministrator)';
  dlgPOExecutionLevel = 'Execution Level';
  dlgPOIcon = 'Icon:';
  dlgPOLoadIcon = '&Load Icon';
  dlgPOSaveIcon = '&Save Icon';
  dlgPOClearIcon = '&Clear Icon';
  dlgPOIconDesc = '(size: %d:%d, bpp: %d)';
  dlgPOIconDescNone = '(none)';

  dlgAutoCreateForms = 'Auto-create forms:';
  dlgAvailableForms = 'Available forms:';
  dlgAutoCreateNewForms = 'When creating new forms, add them to auto-created forms';
  dlgSaveEditorInfo = 'Save editor info for closed files';
  dlgSaveEditorInfoProject = 'Save editor info only for project files';
  lisMainUnitIsPascalSource = 'Main unit is Pascal source';
  lisMainUnitHasUsesSectionContainingAllUnitsOfProject = 'Main unit has Uses '
    +'section containing all units of project';
  lisMainUnitHasApplicationCreateFormStatements = 'Main unit has Application.CreateForm statements';
  lisMainUnitHasApplicationTitleStatements = 'Main unit has Application.Title statements';
  lisProjectIsRunnable = 'Project is runnable';
  lisProjOptsAlwaysBuildEvenIfNothingChanged = 'Always build (even if nothing changed)';
  lisUseDesignTimePackages = 'Use design time packages';
  dlgRunParameters = 'Run Parameters';
  dlgRunOLocal = 'Local';
  dlgRunOEnvironment = 'Environment';
  dlgHostApplication = 'Host application';
  dlgCommandLineParams = 'Command line parameters (without application name)';
  dlgUseLaunchingApp = 'Use launching application';
  lisUseLaunchingApplicationGroupBox = 'Launching application';
  dlgROWorkingDirectory = 'Working directory';
  dlgRunODisplay = 'Display (not for win32, e.g. 198.112.45.11:0, x.org:1, hydra:0.1)';
  dlgRunOUsedisplay = 'Use display';
  dlgRunOSystemVariables = 'System variables';
  dlgRunOUserOverrides = 'User overrides';
  dlgIncludeSystemVariables = 'Include system variables';
  dlgDirectoryDoesNotExist = 'Directory does not exist';
  lisRunParamsFileNotExecutable = 'File not executable';
  lisRunParamsTheHostApplicationIsNotExecutable = 'The host application %s%s%s is not executable.';
  dlgTheDirectory = 'The directory "';
  dlgTextToFind = '&Text to find';
  dlgReplaceWith = '&Replace with';
  dlgFROpts = 'Options';
  lisBFWhenThisFileIsActiveInSourceEditor = 'When this file is active in source editor';
  lisBFOnBuildProjectExecuteTheBuildFileCommandInstead = 'On build project '
    +'execute the Build File command instead';
  lisBFOnRunProjectExecuteTheRunFileCommandInstead = 'On run project execute '
    +'the Run File command instead';
  lisCEFilter = '(filter)';
  lrsPLDUnableToDeleteFile = 'Unable to delete file "%s"';
  lisPESortFilesAlphabetically = 'Sort files alphabetically';
  lisPEShowDirectoryHierarchy = 'Show directory hierarchy';
  dlgCaseSensitive = '&Case sensitive';
  lisDistinguishBigAndSmallLettersEGAAndA = 'Distinguish big and small letters e.g. A and a';
  dlgWholeWordsOnly = '&Whole words only';
  lisOnlySearchForWholeWords = 'Only search for whole words';
  dlgRegularExpressions = 'Regular e&xpressions';
  lisActivateRegularExpressionSyntaxForTextAndReplaceme = 'Activate regular '
    +'expression syntax for text and replacement (pretty much like perl)';
  lisAllowSearchingForMultipleLines = 'Allow searching for multiple lines';
  dlgPromptOnReplace = '&Prompt on replace';
  lisAskBeforeReplacingEachFoundText = 'Ask before replacing each found text';
  dlgSROrigin = 'Origin';
  dlgFromCursor = '&From cursor';
  dlgFromBeginning = 'From b&eginning';
  dlgScope = 'Scope';
  dlgProject = 'Project';
  lisProjectSession = 'Project Session';
  lisWithRequiredPackages = 'With required packages';
  lisLevels = 'Levels';
  lisShowPackages = 'Show packages';
  lisShowUnits = 'Show units';
  lisShowIdentifiers = 'Show identifiers';
  lisFilter = 'Filter';
  lisIssues = 'Issues';
  lisUseMessageFile = 'Use message file:';
  lisRegularExpression = 'Regular expression';
  lisInvalidFilter = 'Invalid filter';
  lisInvalidExpression = 'Invalid expression:%s%s%s%s';
  lisPrivate = 'Private';
  lisProtected = 'Protected';
  lisEMDPublic = 'Public';
  lisEMDPublished = 'Published';
  lisEMDAll = 'All';
  lisEMDOnlyPublished = 'Only published';
  lisEMDFoundEmptyMethods = 'Found empty methods:';
  lisEMDRemoveMethods = 'Remove methods';
  lisEMDNoClass = 'No class';
  lisEMDNoClassAt = 'No class at %s(%s,%s)';
  lisEMDUnableToShowEmptyMethodsOfTheCurrentClassBecause = 'Unable to show '
    +'empty methods of the current class, because%s%s';
  lisRoot = 'Root';
  lisCopyDescription = 'Copy description to clipboard';
  lisUseIdentifierInAt = 'Use identifier %s in %s at %s';
  lisCopyIdentifier = 'Copy %s%s%s to clipboard';
  lisExpandAllPackages = 'Expand all packages';
  lisCollapseAllPackages = 'Collapse all packages';
  lisExpandAllUnits = 'Expand all units';
  lisCollapseAllUnits = 'Collapse all units';
  lisExpandAllClasses = 'Expand all classes';
  lisCollapseAllClasses = 'Collapse all classes';
  lisBegins = 'begins';
  lisIdentifierBeginsWith = 'Identifier begins with ...';
  lisUnitNameBeginsWith = 'Unit name begins with ...';
  lisPackageNameBeginsWith = 'Package name begins with ...';
  lisContains = 'contains';
  lisIdentifierContains = 'Identifier contains ...';
  lisUnitNameContains = 'Unit name contains ...';
  lisPackageNameContains = 'Package name contains ...';
  lisFRIinCurrentUnit = 'in current unit';
  lisFRIinMainProject = 'in main project';
  lisFRIinProjectPackageOwningCurrentUnit = 'in project/package owning current unit';
  lisFRIinAllOpenPackagesAndProjects = 'in all open packages and projects';
  lisFRIRenameAllReferences = 'Rename all References';
  dlgGlobal = '&Global';
  lisPLDUser = 'User';
  lrsPLDValid = 'valid';
  lrsPLDInvalid = 'invalid';
  dlgSelectedText = '&Selected text';
  dlgDirection = 'Direction';
  lisFRForwardSearch = 'Forwar&d search';
  lisFRBackwardSearch = '&Backward search';
  dlgReplaceAll = 'Replace &All';
  
  // IDEOptionDefs
  dlgGetPosition = 'Get position';
  dlgLeftPos     = 'Left:';
  dlgWidthPos    = 'Width:';
  dlgTopPos      = 'Top:';
  DlgHeightPos   = 'Height:';
  rsiwpRestoreWindowGeometry  = 'Restore window geometry';
  rsiwpLetWindowManagerDecide = 'Let windowmanager decide';
  rsiwpFixedDefaultGeometry   = 'Fixed default geometry';
  rsiwpCustomGeometry         = 'Custom geometry';

  rsiwpPositionWindowListHint = 'Windows that have been open. They may be closed now.';
  rsiwpColumnNamesHint    = 'Column Names';
  rsiwpColumnStrategyHint = 'Strategy for saving Columns';
  rsiwpColumnWidthHint    = 'Column Width';
  rsiwpRestoreWindowGeometryHint  = 'Use previous position and size';
  rsiwpLetWindowManagerDecideHint = 'System windowmanagers have different strategies for positioning windows';
  rsiwpFixedDefaultGeometryHint   = 'Always the same fixed position and size';
  rsiwpCustomGeometryHint         = 'User can define window''s position and size';

  rsiwpSplitterFollowWindow          = 'Restore with window';
  rsiwpSplitterRestoreWindowGeometry = 'Restore Size';
  rsiwpSplitterDefault               = 'Default Size';
  rsiwpSplitterCustomPosition        = 'Custom Size';

  // Code Explorer
  lisCodeExplorer = 'Code Explorer';
  lisCode = 'Code';

  // Unit editor
  uemFindDeclaration = '&Find Declaration';
  uemOpenFileAtCursor = '&Open File at Cursor';
  uemProcedureJump = 'Procedure Jump';
  uemClosePage = '&Close Page';
  uemCloseOtherPages = 'Close All &Other Pages';
  uemLockPage = '&Lock Page';
  uemCopyToNewWindow = 'Clone to New Window';
  uemCopyToOtherWindow = 'Clone to Other Window';
  uemCopyToOtherWindowNew = 'New Window';
  uemMoveToNewWindow = 'Move to New Window';
  uemMoveToOtherWindow = 'Move to Other Window';
  uemMoveToOtherWindowNew = 'New Window';
  uemFindInOtherWindow = 'Find in other Window';
  uemCopyFilename = 'Copy Filename';
  uemGotoBookmark = '&Goto Bookmark';
  uemSetFreeBookmark = 'Set a Free Bookmark';
  uemNextBookmark = 'Goto Next Bookmark';
  uemPrevBookmark = 'Goto Previous Bookmark';
  uemBookmarkN = 'Bookmark';
  lisChangeEncoding = 'Change Encoding';
  lisEncodingOfFileOnDiskIsNewEncodingIs2 = 'Encoding of file %s%s%s%son disk '
    +'is %s. New encoding is %s.';
  lisChangeFile = 'Change file';
  lisEncodingOfFileOnDiskIsNewEncodingIs = 'Encoding of file %s%s%s%son disk '
    +'is %s. New encoding is %s.';
  lisReopenWithAnotherEncoding = 'Reopen with another encoding';
  lisAbandonChanges = 'Abandon changes?';
  lisAllYourModificationsToWillBeLostAndTheFileReopened = 'All your modificatio'
    +'ns to %s%s%s%swill be lost and the file reopened.';
  lisOpenLfm = 'Open %s';
  lisUtf8WithBOM = 'UTF-8 with BOM';
  uemSetBookmark = '&Set Bookmark';
  uemToggleBookmark = '&Toggle Bookmark';
  uemReadOnly = 'Read Only';
  uemShowLineNumbers = 'Show Line Numbers';
  lisDisableI18NForLFM = 'Disable I18N for LFM';
  uemDebugWord = 'Debug';
  uemToggleBreakpoint = 'Toggle &Breakpoint';
  uemEvaluateModify = '&Evaluate/Modify ...';
  uemAddWatchAtCursor = 'Add &Watch At Cursor';
  uemAddWatchPointAtCursor = 'Add Watch&Point At Cursor';
  uemInspect = '&Inspect ...';
  uemRunToCursor='&Run to Cursor';
  uemViewCallStack = 'View Call Stack';
  uemMovePageLeft='Move Page Left';
  uemMovePageRight='Move Page Right';
  uemMovePageLeftmost='Move Page Leftmost';
  uemMovePageRightmost='Move Page Rightmost';
  uemSource = 'Source';
  uemRefactor = 'Refactoring';
  uemEditorproperties='Editor Properties';
  ueNotImplCap='Not implemented yet';
  ueFileROCap= 'File is readonly';
  ueFileROText1='The file "';
  ueFileROText2='" is not writable.';
  ueModified='Modified';
  ueLocked='Locked';
  ueMacroRecording = 'Recording';
  ueMacroRecordingPaused = 'Rec-pause';
  uepReadonly= 'Readonly';
  uepIns='INS';
  uepOvr='OVR';
  lisUEFontWith = 'Font without UTF-8';
  lisUETheCurre = 'The current editor font does not support UTF-8, but your '
    +'system seems to use it.%sThat means non ASCII characters will probably '
    +'be shown incorrect.%sYou can select another font in the editor options.';
  lisUEDoNotSho = 'Do not show this message again.';
  uemHighlighter = 'Highlighter';
  uemEncoding = 'Encoding';
  uemLineEnding = 'Line Ending';

  // Form designer
  lisInvalidMultiselection = 'Invalid multiselection';
  lisUnableConvertBinaryStreamToText = 'Unable convert binary stream to text';
  lisUnableToStreamSelectedComponents = 'Unable to stream selected components';
  lisCanNotCopyTopLevelComponent = 'Can not copy top level component.';
  lisCopyingAWholeFormIsNotImplemented = 'Copying a whole form is not implemented.';
  lisThereWasAnErrorDuringWritingTheSelectedComponent = 'There was an error '
    +'during writing the selected component %s:%s:%s%s';
  lisThereWasAnErrorWhileConvertingTheBinaryStreamOfThe = 'There was an error '
    +'while converting the binary stream of the selected component %s:%s:%s%s';
  lisUnableCopyComponentsToClipboard = 'Unable copy components to clipboard';
  lisThereWasAnErrorWhileCopyingTheComponentStreamToCli = 'There was an error '
    +'while copying the component stream to clipboard:%s%s';
  lisErrorIn = 'Error in %s';
  lisDesThereIsAlreadyAnotherComponentWithTheName = 'There is already another '
    +'component with the name %s%s%s.';
  lisTheComponentEditorOfClassInvokedWithVerbHasCreated = 'The component '
    +'editor of class %s%s%s%sinvoked with verb #%s %s%s%s%shas created the '
    +'error:%s%s%s%s';
  lisReset = 'Reset';
  lisResetLeftTopWidthHeightOfSelectedComponentsToTheir = 'Reset Left, Top, '
    +'Width, Height of selected components to their ancestor values?';
  lisTheComponentEditorOfClassHasCreatedTheError = 'The component editor of '
    +'class %s%s%s has created the error:%s%s%s%s';
  fdInvalidMultiselectionText='Multiselected components must be of a single form.';
  lisInvalidDelete = 'Invalid delete';
  lisTheComponentIsInheritedFromToDeleteAnInheritedComp = 'The component %s '
    +'is inherited from %s.%sTo delete an inherited component open the '
    +'ancestor and delete it there.';
  lisTheRootComponentCanNotBeDeleted = 'The root component can not be deleted.';
  fdmAlignMenu='Align ...';
  fdmMirrorHorizontal='Mirror Horizontal';
  fdmMirrorVertical='Mirror Vertical';
  fdmScaleWord='Scale';
  fdmScaleMenu='Scale ...';
  fdmSizeWord='Size';
  fdmSizeMenu='Size ...';
  fdmResetMenu = 'Reset ...';
  fdmZOrder='Z-order';
  fdmOrder='Order';
  fdmOrderMoveTofront='Move to Front';
  fdmOrderMoveToback='Move to Back';
  fdmOrderForwardOne='Forward One';
  fdmOrderBackOne='Back One';
  fdmDeleteSelection='Delete Selection';
  fdmSelectAll='Select All';
  lisChangeClass = 'Change Class';
  lisDlgChangeClass = 'Change Class ...';
  fdmSnapToGridOption='Option: Snap to grid';
  fdmSnapToGuideLinesOption='Option: Snap to guide lines';
  lisViewSourceLfm = 'View Source (.lfm)';
  lisCenterForm = 'Center Form';
  fdmSaveFormAsXML = 'Save Form as XML';

  // keyMapping
  srkmEditKeys ='Edit Keys';
  srkmCommand  = 'Command:';
  lisKeyOr2KeySequence = 'Key (or 2 key sequence)';
  lisTheKeyIsAlreadyAssignedToRemoveTheOldAssignmentAnd = 'The key %s%sis '
    +'already assigned to %s.%s%sRemove the old assignment and assign the key '
    +'to the new function%s%s?';
  lisAlternativeKeyOr2KeySequence = 'Alternative key (or 2 key sequence)';
  srkmConflic  = 'Conflict ';
  srkmConflicW = ' conflicts with ';
  srkmCommand1 = '    command1 "';
  srkmCommand2 = '    command2 "';
  srkmEditForCmd = 'Edit keys of command';
  lisChooseAKey = 'Choose a key ...';

  //Commands
  srkmecLeft                  = 'Move cursor left';
  srkmecRight                 = 'Move cursor right';
  srkmecUp                    = 'Move cursor up';
  srkmecDown                  = 'Move cursor down';
  srkmecWordLeft              = 'Move cursor word left';
  srkmecWordRight             = 'Move cursor word right';
  srkmecWordEndLeft           = 'Move cursor word-end left';
  srkmecWordEndRight          = 'Move cursor word-end right';
  srkmecHalfWordLeft          = 'Move cursor half-word left';
  srkmecHalfWordRight         = 'Move cursor half-word right';
  srkmecLineStart             = 'Move cursor to line start';
  srkmecLineEnd               = 'Move cursor to line end';
  srkmecPageUp                = 'Move cursor up one page';
  srkmecPageDown              = 'Move cursor down one page';
  srkmecPageLeft              = 'Move cursor left one page';
  srkmecPageRight             = 'Move cursor right one page';
  srkmecPageTop               = 'Move cursor to top of page';
  srkmecPageBottom            = 'Move cursor to bottom of page';
  srkmecEditorTop             = 'Move cursor to absolute beginning';
  srkmecEditorBottom          = 'Move cursor to absolute end';
  srkmecGotoXY                = 'Goto XY';
  srkmecLineTextStart         = 'Move cursor to text start in line';
  srkmecSelSticky             = 'Start sticky selecting';
  srkmecSelStickyCol          = 'Start sticky selecting (Columns)';
  srkmecSelStickyLine         = 'Start sticky selecting (Line)';
  srkmecSelStickyStop         = 'Stop sticky selecting';
  srkmecSelLeft               = 'Select Left';
  srkmecSelRight              = 'Select Right';
  srkmecSelUp                 = 'Select Up';
  srkmecSelDown               = 'Select Down';
  srkmecSelWordLeft           = 'Select Word Left';
  srkmecSelWordRight          = 'Select Word Right';
  srkmecSelWordEndLeft           = 'Select word-end left';
  srkmecSelWordEndRight          = 'Select word-end right';
  srkmecSelHalfWordLeft          = 'Select half-word left';
  srkmecSelHalfWordRight         = 'Select half-word right';
  srkmecSelLineStart          = 'Select Line Start';
  srkmecSelLineEnd            = 'Select Line End';
  srkmecSelPageUp             = 'Select Page Up';
  srkmecSelPageDown           = 'Select Page Down';
  srkmecSelPageLeft           = 'Select Page Left';
  srkmecSelPageRight          = 'Select Page Right';
  srkmecSelPageTop            = 'Select Page Top';
  srkmecSelPageBottom         = 'Select Page Bottom';
  srkmecSelEditorTop          = 'Select to absolute beginning';
  srkmecSelEditorBottom       = 'Select to absolute end';
  srkmecSelLineTextStart      = 'Select to text start in line';
  srkmecColSelUp              = 'Column Select Up';
  srkmecColSelDown            = 'Column Select Down';
  srkmecColSelLeft            = 'Column Select Left';
  srkmecColSelRight           = 'Column Select Right';
  srkmecColSelWordLeft        = 'Column Select Word Left';
  srkmecColSelWordRight       = 'Column Select Word Right';
  srkmecColSelPageDown        = 'Column Select Page Down';
  srkmecColSelPageBottom      = 'Column Select Page Bottom';
  srkmecColSelPageUp          = 'Column Select Page Up';
  srkmecColSelPageTop         = 'Column Select Page Top';
  srkmecColSelLineStart       = 'Column Select Line Start';
  srkmecColSelLineEnd         = 'Column Select Line End';
  srkmecColSelEditorTop       = 'Column Select to absolute beginning';
  srkmecColSelEditorBottom    = 'Column Select to absolute end';
  srkmecColSelLineTextStart   = 'Column Select to text start in line';
  srkmecSelGotoXY             = 'Select Goto XY';
  srkmecSelectAll             = 'Select All';
  srkmecDeleteLastChar        = 'Delete Last Char';
  srkmecDeletechar            = 'Delete char at cursor';
  srkmecDeleteWord            = 'Delete to end of word';
  srkmecDeleteLastWord        = 'Delete to start of word';
  srkmecDeleteBOL             = 'Delete to beginning of line';
  srkmecDeleteEOL             = 'Delete to end of line';
  srkmecDeleteLine            = 'Delete current line';
  srkmecClearAll              = 'Delete whole text';
  srkmecLineBreak             = 'Break line and move cursor';
  srkmecInsertLine            = 'Break line, leave cursor';
  srkmecChar                  = 'Char';
  srkmecImeStr                = 'Ime Str';
  srkmecCut                   = 'Cut selection to clipboard';
  srkmecCopy                  = 'Copy selection to clipboard';
  srkmecPaste                 = 'Paste clipboard to current position';
  srkmecScrollUp              = 'Scroll up one line';
  srkmecScrollDown            = 'Scroll down one line';
  srkmecScrollLeft            = 'Scroll left one char';
  srkmecScrollRight           = 'Scroll right one char';
  srkmecInsertMode            = 'Insert Mode';
  srkmecOverwriteMode         = 'Overwrite Mode';
  srkmecToggleMode            = 'Toggle Mode';
  srkmecBlockIndent           = 'Indent block';
  srkmecBlockUnindent         = 'Unindent block';

  srkmecBlockSetBegin   = 'Set block begin';
  srkmecBlockSetEnd     = 'Set block end';
  srkmecBlockToggleHide = 'Toggle block';
  srkmecBlockHide       = 'Hide Block';
  srkmecBlockShow       = 'Show Block';
  srkmecBlockMove       = 'Move Block';
  srkmecBlockCopy       = 'Copy Block';
  srkmecBlockDelete     = 'Delete Block';
  srkmecBlockGotoBegin  = 'Goto Block begin';
  srkmecBlockGotoEnd    = 'Goto Block end';

  srkmecShiftTab              = 'Shift Tab';
  lisTab                      = 'Tab';
  srkmecMatchBracket          = 'Go to matching bracket';
  srkmecNormalSelect          = 'Normal selection mode';
  srkmecColumnSelect          = 'Column selection mode';
  srkmecLineSelect            = 'Line selection mode';
  srkmecAutoCompletion        = 'Code template completion';
  srkmecUserFirst             = 'User First';
  srkmecSetFreeBookmark       = 'Set a free Bookmark';
  srkmecClearBookmarkForFile  = 'Clear Bookmarks for current file';
  srkmecClearAllBookmark      = 'Clear all Bookmarks';
  srkmecPrevBookmark          = 'Previous Bookmark';
  srkmecNextBookmark          = 'Next Bookmark';
  lisKMGoToMarker0 = 'Go to marker 0';
  lisKMGoToMarker1 = 'Go to marker 1';
  lisKMGoToMarker2 = 'Go to marker 2';
  lisKMGoToMarker3 = 'Go to marker 3';
  lisKMGoToMarker4 = 'Go to marker 4';
  lisKMGoToMarker5 = 'Go to marker 5';
  lisKMGoToMarker6 = 'Go to marker 6';
  lisKMGoToMarker7 = 'Go to marker 7';
  lisKMGoToMarker8 = 'Go to marker 8';
  lisKMGoToMarker9 = 'Go to marker 9';
  lisKMSetMarker0 = 'Set marker 0';
  lisKMSetMarker1 = 'Set marker 1';
  lisKMSetMarker2 = 'Set marker 2';
  lisKMSetMarker3 = 'Set marker 3';
  lisKMSetMarker4 = 'Set marker 4';
  lisKMSetMarker5 = 'Set marker 5';
  lisKMSetMarker6 = 'Set marker 6';
  lisKMSetMarker7 = 'Set marker 7';
  lisKMSetMarker8 = 'Set marker 8';
  lisKMSetMarker9 = 'Set marker 9';
  lisKMToggleMarker0 = 'Toggle marker 0';
  lisKMToggleMarker1 = 'Toggle marker 1';
  lisKMToggleMarker2 = 'Toggle marker 2';
  lisKMToggleMarker3 = 'Toggle marker 3';
  lisKMToggleMarker4 = 'Toggle marker 4';
  lisKMToggleMarker5 = 'Toggle marker 5';
  lisKMToggleMarker6 = 'Toggle marker 6';
  lisKMToggleMarker7 = 'Toggle marker 7';
  lisKMToggleMarker8 = 'Toggle marker 8';
  lisKMToggleMarker9 = 'Toggle marker 9';
  srkmecGotoMarker            = 'Go to Marker %d';
  srkmecSetMarker             = 'Set Marker %d';
  srkmecToggleMarker          = 'Toggle Marker %d';

  // sourcenotebook
  lisKMToggleBetweenUnitAndForm = 'Toggle between Unit and Form';
  srkmecNextEditor            = 'Go to next editor';
  srkmecPrevEditor            = 'Go to prior editor';
  srkmecMoveEditorLeft        = 'Move editor left';
  srkmecMoveEditorRight       = 'Move editor right';
  srkmecMoveEditorLeftmost    = 'Move editor leftmost';
  srkmecMoveEditorRightmost   = 'Move editor rightmost';

  srkmecNextSharedEditor         = 'Go to next editor with same Source';
  srkmecPrevSharedEditor         = 'Go to prior editor with same Source';
  srkmecNextWindow               = 'Go to next window';
  srkmecPrevWindow               = 'Go to prior window';
  srkmecMoveEditorNextWindow     = 'Move editor to next free window';
  srkmecMoveEditorPrevWindow     = 'Move editor to prior free window';
  srkmecMoveEditorNewWindow      = 'Move editor to new window';
  srkmecCopyEditorNextWindow     = 'Copy editor to next free window';
  srkmecCopyEditorPrevWindow     = 'Copy editor to prior free window';
  srkmecCopyEditorNewWindow      = 'Copy editor to new window';
  srkmecLockEditor               = 'Lock Editor';

  lisKMGoToSourceEditor1 = 'Go to source editor 1';
  lisKMGoToSourceEditor2 = 'Go to source editor 2';
  lisKMGoToSourceEditor3 = 'Go to source editor 3';
  lisKMGoToSourceEditor4 = 'Go to source editor 4';
  lisKMGoToSourceEditor5 = 'Go to source editor 5';
  lisKMGoToSourceEditor6 = 'Go to source editor 6';
  lisKMGoToSourceEditor7 = 'Go to source editor 7';
  lisKMGoToSourceEditor8 = 'Go to source editor 8';
  lisKMGoToSourceEditor9 = 'Go to source editor 9';
  srkmecGotoEditor            = 'Go to editor %d';
  srkmEcFoldLevel             = 'Fold to Level %d';
  srkmecUnFoldAll             = 'Unfold all';
  srkmecFoldCurrent           = 'Fold at Cursor';
  srkmecUnFoldCurrent         = 'Unfold at Cursor';
  srkmecToggleMarkupWord      = 'Toggle Current-Word highlight';

  // edit menu
  srkmecSelectionTabs2Spaces     = 'Convert tabs to spaces in selection';
  srkmecInsertCharacter          = 'Insert from Charactermap';
  srkmecInsertGPLNotice          = 'Insert GPL notice';
  srkmecInsertLGPLNotice         = 'Insert LGPL notice';
  srkmecInsertModifiedLGPLNotice = 'Insert modified LGPL notice';
  srkmecInsertMITNotice          = 'Insert MIT notice';
  lisKMInsertUsername            = 'Insert username';
  lisKMInsertDateAndTime         = 'Insert date and time';
  srkmecInsertUserName           = 'Insert current username';
  srkmecInsertDateTime           = 'Insert current date and time';
  srkmecInsertChangeLogEntry     = 'Insert ChangeLog entry';
  srkmecInsertCVSAuthor          = 'Insert CVS keyword Author';
  srkmecInsertCVSDate            = 'Insert CVS keyword Date';
  srkmecInsertCVSHeader          = 'Insert CVS keyword Header';
  srkmecInsertCVSID              = 'Insert CVS keyword ID';
  srkmecInsertCVSLog             = 'Insert CVS keyword Log';
  srkmecInsertCVSName            = 'Insert CVS keyword Name';
  srkmecInsertCVSRevision        = 'Insert CVS keyword Revision';
  srkmecInsertCVSSource          = 'Insert CVS keyword Source';
  srkmecInsertGUID               = 'Insert a GUID';
  srkmecInsertFilename           = 'Insert Full Filename';
  lisMenuInsertFilename          = 'Insert Full Filename ...';

  // search menu
  srkmecFind                      = 'Find Text';
  srkmecFindNext                  = 'Find Next';
  srkmecFindPrevious              = 'Find Previous';
  srkmecFindInFiles               = 'Find in Files';
  srkmecReplace                   = 'Replace Text';
  lisKMFindIncremental            = 'Find Incremental';
  srkmecFindProcedureDefinition   = 'Find Procedure Definiton';
  srkmecFindProcedureMethod       = 'Find Procedure Method';
  srkmecGotoLineNumber            = 'Go to Line Number';
  srkmecFindNextWordOccurrence    = 'Find Next Word Occurrence';
  srkmecFindPrevWordOccurrence    = 'Find Previous Word Occurrence';
  srkmecAddJumpPoint              = 'Add Jump Point';
  srkmecOpenFileAtCursor          = 'Open File at Cursor';
  srkmecGotoIncludeDirective      = 'Go to include directive of current include file';
  
  // view menu
  srkmecToggleFormUnit            = 'Switch between form and unit';
  srkmecToggleObjectInsp          = 'View Object Inspector';
  srkmecToggleSourceEditor        = 'View Source Editor';
  srkmecToggleCodeExpl            = 'View Code Explorer';
  srkmecToggleFPDocEditor         = 'View Documentation Editor';
  srkmecToggleMessages            = 'View messages';
  srkmecToggleSearchResults       = 'View Search Results';
  srkmecToggleWatches             = 'View watches';
  srkmecToggleBreakPoints         = 'View breakpoints';
  srkmecToggleDebuggerOut         = 'View debugger output';
  srkmecToggleLocals              = 'View local variables';
  srkmecViewThreads               = 'View Threads';
  srkmecViewHistory               = 'View History';
  srkmecViewPseudoTerminal        = 'View Terminal Output';
  srkmecTogglecallStack           = 'View call stack';
  srkmecToggleRegisters           = 'View registers';
  srkmecToggleAssembler           = 'View assembler';
  srkmecViewUnits                 = 'View units';
  srkmecViewForms                 = 'View forms';
  srkmecViewComponents            = 'View components';
  srkmecViewEditorMacros          = 'View editor macros';
  lisKMViewJumpHistory            = 'View jump history';
  srkmecViewUnitDependencies      = 'View unit dependencies';
  srkmecViewUnitInfo              = 'View unit information';
  srkmecViewAnchorEditor          = 'View anchor editor';
  srkmecViewTabOrder              = 'View Tab Order';
  srkmecToggleCodeBrowser         = 'View code browser';
  srkmecToggleRestrictionBrowser  = 'View restriction browser';
  srkmecToggleCompPalette         = 'View component palette';
  srkmecToggleIDESpeedBtns        = 'View IDE speed buttons';

  // codetools
  srkmecWordCompletion            = 'Word Completion';
  srkmecCompletecode              = 'Complete Code';
  lisMenuCompleteCode             = 'Complete Code';
  lisUseUnit                      = 'Add Unit to Uses Section';
  lisMenuUseUnit                  = 'Add Unit to Uses Section ...';
  srkmecShowCodeContext           = 'Show Code Context';
  srkmecExtractProc               = 'Extract Procedure';
  lisMenuExtractProc              = 'Extract Procedure ...';
  srkmecFindIdentifierRefs        = 'Find Identifier References';
  lisMenuFindIdentifierRefs       = 'Find Identifier References ...';
  srkmecRenameIdentifier          = 'Rename Identifier';
  lisMenuRenameIdentifier         = 'Rename Identifier ...';
  srkmecInvertAssignment          = 'Invert Assignment';
  uemInvertAssignment             = 'Invert Assignment';
  srkmecSyntaxCheck               = 'Syntax Check';
  srkmecGuessMisplacedIFDEF       = 'Guess Misplaced $IFDEF';
  srkmecFindDeclaration           = 'Find Declaration';
  srkmecFindBlockOtherEnd         = 'Find block other end';
  srkmecFindBlockStart            = 'Find block start';
  srkmecAbstractMethods           = 'Abstract Methods ...';
  srkmecShowAbstractMethods       = 'Show Abstract Methods';
  srkmecEmptyMethods              = 'Empty Methods ...';
  srkmecRemoveEmptyMethods        = 'Remove Empty Methods';
  srkmecUnusedUnits               = 'Unused Units ...';
  srkmecRemoveUnusedUnits         = 'Remove Unused Units';
  srkmecFindOverloads             = 'Find Overloads';
  srkmecFindOverloadsCapt         = 'Find Overloads ...';

  // Macro edit
  srkmecSynMacroRecord            = 'Record Macro';
  srkmecSynMacroPlay              = 'Play Macro';

  //Plugin template Edit
  srkmecSynPTmplEdNextCell           = 'Next Cell';
  srkmecSynPTmplEdNextCellSel        = 'Next Cell (all selected)';
  srkmecSynPTmplEdNextCellRotate     = 'Next Cell (rotate)';
  srkmecSynPTmplEdNextCellSelRotate  = 'Next Cell (rotate / all selected)';
  srkmecSynPTmplEdPrevCell           = 'Previous Cell';
  srkmecSynPTmplEdPrevCellSel        = 'Previous Cell (all selected)';
  srkmecSynPTmplEdNextFirstCell           = 'Next Cell (firsts only)';
  srkmecSynPTmplEdNextFirstCellSel        = 'Next Cell (all selected / firsts only)';
  srkmecSynPTmplEdNextFirstCellRotate     = 'Next Cell (rotate / firsts only)';
  srkmecSynPTmplEdNextFirstCellSelRotate  = 'Next Cell (rotate / all selected / firsts only)';
  srkmecSynPTmplEdPrevFirstCell           = 'Previous Cell (firsts only)';
  srkmecSynPTmplEdPrevFirstCellSel        = 'Previous Cell (all selected / firsts only)';
  srkmecSynPTmplEdCellHome           = 'Goto first pos in cell';
  srkmecSynPTmplEdCellEnd            = 'Goto last pos in cell';
  srkmecSynPTmplEdCellSelect         = 'Select cell';
  srkmecSynPTmplEdFinish             = 'Finish';
  srkmecSynPTmplEdEscape             = 'Escape';

  // Plugin Syncro Edit
  srkmecSynPSyncroEdNextCell         = 'Next Cell';
  srkmecSynPSyncroEdNextCellSel      = 'Next Cell (all selected)';
  srkmecSynPSyncroEdPrevCell         = 'Previous Cell';
  srkmecSynPSyncroEdPrevCellSel      = 'Previous Cell (all selected)';
  srkmecSynPSyncroEdNextFirstCell    = 'Next Cell (firsts only)';
  srkmecSynPSyncroEdNextFirstCellSel = 'Next Cell (all selected / firsts only)';
  srkmecSynPSyncroEdPrevFirstCell    = 'Previous Cell (firsts only)';
  srkmecSynPSyncroEdPrevFirstCellSel = 'Previous Cell (all selected / firsts only)';
  srkmecSynPSyncroEdCellHome         = 'Goto first pos in cell';
  srkmecSynPSyncroEdCellEnd          = 'Goto last pos in cell';
  srkmecSynPSyncroEdCellSelect       = 'Select Cell';
  srkmecSynPSyncroEdEscape           = 'Escape';
  srkmecSynPSyncroEdStart            = 'Start Syncro edit';

  // run menu
  srkmecCompile                   = 'compile program/project';
  srkmecBuild                     = 'build program/project';
  srkmecQuickCompile              = 'quick compile, no linking';
  srkmecCleanUpCompiled           = 'clean up build files';
  srkmecAbortBuild                = 'abort build';
  srkmecRun                       = 'run program';
  srkmecPause                     = 'pause program';
  srkmecShowExecutionPoint        = 'show execution point';
  srkmecStopProgram               = 'stop program';
  srkmecResetDebugger             = 'reset debugger';
  srkmecToggleBreakPoint          = 'toggle breakpoint';
  srkmecRemoveBreakPoint          = 'remove breakpoint';
  srkmecAttach                    = 'Attach to program';
  srkmecDetach                    = 'Detach from program';
  srkmecRunParameters             = 'run parameters';
  srkmecCompilerOptions           = 'compiler options';
  srkmecBuildFile                 = 'build file';
  srkmecRunFile                   = 'run file';
  srkmecConfigBuildFile           = 'config build file';
  srkmecInspect                   = 'inspect';
  srkmecEvaluate                  = 'evaluate/modify';
  srkmecAddWatch                  = 'add watch';
  srkmecAddBpSource               = 'add source breakpoint';
  srkmecAddBpAddress              = 'add address breakpoint';
  srkmecAddBpWatchPoint           = 'add data/watchpoint';

  // tools menu
  srkmecExtToolSettings           = 'External tools settings';
  srkmecBuildLazarus              = 'Build lazarus';
  srkmecExtTool                   = 'External tool %d';
  srkmecEnvironmentOptions        = 'IDE options';
  lisKMEditCodeTemplates          = 'Edit Code Templates';
  lisKMCodeToolsDefinesEditor            = 'CodeTools defines editor';
  lisCodeToolsDefsCodeToolsDefinesEditor = 'CodeTools Defines Editor';
  lisMenuCodeToolsDefinesEditor          = 'CodeTools Defines Editor ...';
  lisMenuRescanFPCSourceDirectory = 'Rescan FPC Source Directory';
  srkmecMakeResourceString        = 'Make Resource String';
  lisKMDiffEditorFiles            = 'Diff Editor Files';
  lisKMConvertDFMFileToLFM        = 'Convert DFM File to LFM';
  lisKMConvertDelphiUnitToLazarusUnit = 'Convert Delphi Unit to Lazarus Unit';
  lisKMConvertDelphiProjectToLazarusProject = 'Convert Delphi Project to Lazarus Project';
  srkmecDiff                      = 'Diff';
  
  // help menu
  srkmecunknown                   = 'unknown editor command';
  srkmecReportingBug              = 'Reporting a bug';
  lisFocusHint = 'Focus hint';
   
  // Category
  srkmCatCursorMoving   = 'Cursor moving commands';
  srkmCatSelection      = 'Text selection commands';
  srkmCatColSelection   = 'Text column selection commands';
  srkmCatEditing        = 'Text editing commands';
  lisKMDeleteLastChar   = 'Delete last char';
  srkmCatCmdCmd         = 'Command commands';
  srkmCatSearchReplace  = 'Text search and replace commands';
  srkmCatMarker         = 'Text marker commands';
  srkmCatFold           = 'Text folding commands';
  lisKMSetFreeBookmark = 'Set free Bookmark';
  srkmCatCodeTools      = 'CodeTools commands';
  srkmCatMacroRecording = 'Macros';
  srkmCatTemplateEdit   = 'Template Editing';
  srkmCatTemplateEditOff= 'Template Editing (not in Cell)';
  srkmCatSyncroEdit     = 'Syncron Editing';
  srkmCatSyncroEditOff  = 'Syncron Editing (not in Cell)';
  srkmCatSyncroEditSel  = 'Syncron Editing (while selecting)';

  srkmCatSrcNoteBook    = 'Source Notebook commands';
  srkmCatFileMenu       = 'File menu commands';
  lisKMGoToSourceEditor10 = 'Go to source editor 10';
  srkmCatViewMenu       = 'View menu commands';
  lisKMToggleViewObjectInspector = 'Toggle view Object Inspector';
  lisKMToggleViewSourceEditor = 'Toggle view Source Editor';
  lisKMToggleViewCodeExplorer = 'Toggle view Code Explorer';
  lisKMToggleViewDocumentationEditor = 'Toggle view Documentation Editor';
  lisKMToggleViewMessages = 'Toggle view Messages';
  lisKMToggleViewSearchResults = 'Toggle view Search Results';
  lisKMToggleViewWatches = 'View Watches';
  lisKMToggleViewBreakpoints = 'View Breakpoints';
  lisKMToggleViewLocalVariables = 'View Local Variables';
  lisKMToggleViewThreads = 'View Threads';
  lisKMToggleViewHistory = 'View History';
  lisKMToggleViewPseudoTerminal = 'View Terminal Output';
  lisKMToggleViewCallStack = 'View Call Stack';
  lisKMToggleViewRegisters = 'View Registers';
  lisKMToggleViewAssembler = 'View Assembler';
  lisKMToggleViewDebugEvents = 'View Debuger Event Log';
  lisKMToggleViewDebuggerOutput = 'View Debugger Output';
  srkmCatProjectMenu    = 'Project menu commands';
  lisKMNewProject = 'New project';
  lisKMNewProjectFromFile = 'New project from file';
  lisKMToggleViewIDESpeedButtons = 'Toggle view IDE speed buttons';
  srkmCatRunMenu        = 'Run menu commands';
  lisKMCompileProjectProgram = 'Compile project/program';
  lisKMBuildProjectProgram = 'Build project/program';
  lisKMQuickCompileNoLinking = 'Quick compile, no linking';
  lisKMCleanUpCompiled = 'Clean up build files';
  lisKMAbortBuilding = 'Abort building';
  lisKMRunProgram = 'Run program';
  lisKMPauseProgram = 'Pause program';
  lisKMViewProjectOptions = 'View project options';
  srkmCatPackageMenu = 'Package menu commands';
  srkmCatToolMenu       = 'Tools menu commands';
  lisKMExternalToolsSettings = 'External Tools settings';
  lisKMConvertDelphiPackageToLazarusPackage = 'Convert Delphi package to Lazarus package';
  srkmCarHelpMenu       = 'Help menu commands';
  lisKeyCatDesigner     = 'Designer commands';
  lisKMCopySelectedComponentsToClipboard = 'Copy selected Components to '
    +'clipboard';
  lisKMCutSelectedComponentsToClipboard =
    'Cut selected Components to clipboard';
  lisKMPasteComponentsFromClipboard = 'Paste Components from clipboard';
  lisKeyCatObjInspector = 'Object Inspector commands';
  lisKeyCatCustom       = 'Custom commands';

  // Languages
  rsLanguageAutomatic    = 'Automatic (or english)';
  rsLanguageEnglish      = 'English';
  rsLanguageGerman       = 'German';
  rsLanguageSpanish      = 'Spanish';
  rsLanguageFrench       = 'French';
  rsLanguageRussian      = 'Russian';
  rsLanguagePolish       = 'Polish';
  rsLanguageItalian      = 'Italian';
  rsLanguageCatalan      = 'Catalan';
  rsLanguageFinnish      = 'Finnish';
  rsLanguageHebrew       = 'Hebrew';
  rsLanguageArabic       = 'Arabic';
  rsLanguagePortugueseBr = 'Brazilian Portuguese';
  rsLanguagePortuguese   = 'Portuguese';
  rsLanguageUkrainian    = 'Ukrainian';
  rsLanguageDutch        = 'Dutch';
  rsLanguageJapanese     = 'Japanese';
  rsLanguageChinese      = 'Chinese';
  rsLanguageIndonesian   = 'Indonesian';
  rsLanguageAfrikaans    = 'Afrikaans';
  rsLanguageLithuanian   = 'Lithuanian';
  rsLanguageSlovak       = 'Slovak';
  rsLanguageTurkish      = 'Turkish';
  rsLanguageCzech        = 'Czech';

  // Unit dependencies
  dlgUnitDepCaption      = 'Unit Dependencies';
  dlgUnitDepRefresh      = 'Refresh';

  // Doc Editor
  lisDocumentationEditor = 'Documentation Editor';
   
  // Build lazarus dialog
  lisConfirmLazarusRebuild = 'Do you want to rebuild Lazarus with profile: %s?';
  lisConfirmation = 'Confirmation';
  lisPkgTheProjectOverridesTheOutputDirectoryOfTheFollowin = 'The project '
    +'overrides the output directory of the following packages.%sSee Project /'
    +' Project Options / Additions and Overrides%s%s%s';
  lisConfirmBuildAllProfiles = 'Lazarus will be rebuilt with the following profiles:%sContinue?';
  lisNoBuildProfilesSelected = 'No profiles are selected to be built.';
  lisCleanLazarusSource = 'Clean Lazarus Source';
  lisMakeNotFound = 'Make not found';
  lisTheProgramMakeWasNotFoundThisToolIsNeededToBuildLa = 'The program %smake%'
    +'s was not found.%sThis tool is needed to build lazarus.%s';
  lisIDE = 'IDE';
  lisConfigureBuildLazarus = 'Configure %sBuild Lazarus%s';
  lisLazBuildBuildComponentsSynEditCodeTools = 'Build components (SynEdit, CodeTools)';
  lisLazBuildBuildSynEdit = 'Build SynEdit';
  lisLazBuildBuildCodeTools = 'Build CodeTools';
  lisLazBuildBuildIDE = 'Build IDE';
  lisLazBuildOptions = 'Options:';
  lisLazBuildTargetOS = 'Target OS:';
  lisLazBuildTargetCPU = 'Target CPU:';
  lisLazBuildTargetDirectory = 'Target directory:';
  lisLazBuildRestartAfterBuild = 'Restart after building IDE';
  lisLazBuildUpdateRevInc = 'Update revision.inc';
  lisLazBuildCommonSettings = 'Common Settings';
  lisLazBuildConfirmBuild = 'Confirm before build';
  lisPERemoveFiles = 'Remove files';
  lisLazBuildNewProf = 'Add New Profile';
  lisLazBuildNewProfInfo = 'Current build options will be associated with:';
  lisKeep2 = 'Keep';
  lisRemoveIncludePath = 'Remove include path?';
  lisTheDirectoryContainsNoProjectIncludeFilesAnyMoreRe = 'The directory "%s" '
    +'contains no project include files any more. Remove this directory from '
    +'the project''s include search path?';
  lisLazBuildRenameProf = 'Rename Profile';
  lisLazBuildRenameProfInfo = 'New name for profile:';
  lisCTDTemplates = 'Templates';
  lisSaveSettings = 'Save Settings';
  lisCleanUp = 'Clean up';
  lisLazBuildBuildMany = 'Build Many';
  lisAutomatically = 'Automatically';
  lisCleanCommonFiles = 'Clean common files';
  lisCleanAll = 'Clean all';
  lisCleanOnlyOnce = 'Switch after building to automatically';
  lisAfterCleaningUpSwitchToAutomaticClean = 'After cleaning up (clean all or clean common files), switch to '
    +'clean automatically';
  lisLazBuildManageProfiles ='Manage Build Profiles';
  lisLazBuildProfile ='Profile to build';
  lisLazBuildRefresh ='Refresh';
  lisLazBuildErrorWritingFile = 'Error writing file';
  lisLazBuildUnableToWriteFile = 'Unable to write file "%s":%s';
  lisLazBuildIDEwithoutPackages = 'IDE without Packages';
  lisLazBuildNormalIDE = 'Normal IDE';
  lisLazBuildDebugIDE = 'Debug IDE';
  lisLazBuildOptimizedIDE = 'Optimized IDE';
  lisLazCleanUpBuildAll = 'Clean Up + Build all';

  lisLazBuildABOAction = 'Action';
  lisLazBuildABOChooseOutputDir = 'Choose output directory of the IDE executable ';
  lisLazBuildDefines = 'Defines';
  lisLazBuildEditDefines = 'Edit Defines';
  lisLazBuildEditDefinesDialogCaption = 'Edit Defines';
  lisLazBuildNameOfTheActiveProfile = 'Name of the active profile';
  lisLazBuildManageProfiles2 = 'Manage profiles';
  lisLazBuildDefinesWithoutD = 'Defines without -d';
  lisLazBuildOptionsPassedToCompiler = 'Options passed to compiler';
  lisLazBuildShowOptionsAndDefinesForCommandLine = 'Show options and defines '
    +'for command line';
  lisLazBuildUpdateRevisionInfoInAboutLazarusDialog = 'Update revision info '
    +'in "About Lazarus" dialog';
  lisLazBuildRestartLazarusAutomatically = 'Restart Lazarus automatically after '+
    'building the IDE (has no effect when building other parts)';
  lisLazBuildShowConfirmationDialogWhenBuilding = 'Show confirmation dialog when '+
    'building directly from Tools menu';
  lisLazBuildEditListOfDefinesWhichCanBeUsedByAnyProfile = 'Edit list of '
    +'defines which can be used by any profile';
  lisLazBuildConfirmDeletion = 'Confirm deletion';
  lisLazBuildAreYouSureYouWantToDeleteThisBuildProfile = 'Are you sure you '
    +'want to delete this build profile?';
  lisLazBuildSelectProfilesToBuild = 'Select profiles to build';

  lisExamplesOpenFirstSelected = 'Open first selected';
  lisExamplesBuildAllSelected = 'Build all selected';

  // compiler
  lisCompilerErrorInvalidCompiler = 'Error: invalid compiler: %s';
  listCompilerInternalError = 'Internal compiler error! (%d)';
  lisOptionsChangedRecompilingCleanWithB = 'Options changed, recompiling '
    +'clean with -B';
  lisCompilerHintYouCanSetTheCompilerPath = 'Hint: you can set the compiler '
    +'path in Tools -> Options-> Files -> Compiler Path';
  lisCompilerNOTELoadingOldCodetoolsOptionsFile = 'NOTE: loading old '
    +'codetools options file: ';
  lisCompilerNOTECodetoolsConfigFileNotFoundUsingDefaults = 'NOTE: codetools '
    +'config file not found - using defaults';
     
  // codetools options dialog
  lisCodeToolsOptsNone        = 'None';
  lisCodeToolsOptsKeyword     = 'Keyword';
  lisCodeToolsOptsIdentifier  = 'Identifier';
  lisFRIAdditionalFilesToSearchEGPathPasPath2Pp = 'Additional files to '
    +'search (e.g. /path/*.pas;/path2/*.pp)';
  lisFRIFindReferences = 'Find References';
  lisFRIInvalidIdentifier = 'Invalid Identifier';
  lisFRIRenameTo = 'Rename to';
  lisFRISearchInCommentsToo = 'Search in comments too';
  lisFRISearchWhere = 'Search where';
  lisCodeToolsOptsColon       = 'Colon';
  lisCodeToolsOptsSemicolon   = 'Semicolon';
  lisCodeToolsOptsComma       = 'Comma';
  lisCodeToolsOptsPoint       = 'Point';
  lisCodeToolsOptsAt          = 'At';
  lisCodeToolsOptsNumber      = 'Number';
  lisCodeToolsOptsStringConst = 'String constant';
  lisCodeToolsOptsNewLine     = 'Newline';
  lisCodeToolsOptsSpace       = 'Space';
  lisCodeToolsOptsSymbol      = 'Symbol';
  lisCodeToolsOptsBracket     = 'Bracket';

  // codetools defines
  lisCodeToolsDefsCodeToolsDefinesPreview = 'CodeTools Defines Preview';
  lisCodeToolsDefsWriteError = 'Write error';
  lisErrorWritingFile2 = 'Error writing file %s';
  lisErrorWritingFile = 'Error writing file "%s"';
  lisFPDocErrorWriting = 'Error writing "%s"%s%s';
  lisFPDocFPDocSyntaxError = 'FPDoc syntax error';
  lisFPDocThereIsASyntaxErrorInTheFpdocElement = 'There is a syntax error in '
    +'the fpdoc element "%s":%s%s';
  lisChooseAnExampleFile = 'Choose an example file';
  lisPascalFile = 'Pascal file';
  lisUnableToWriteToFile2 = 'Unable to write to file "%s".';
  lisUnableToWriteTheProjectSessionFileError = 'Unable to write the project '
    +'session file%s"%s".%sError: %s';
  lisStopDebugging2 = 'Stop debugging?';
  lisStopCurrentDebuggingAndRebuildProject = 'Stop current debugging and rebuild project?';
  lisErrorWritingPackageListToFile = 'Error writing package list to file%s%s%s%s';
  lisCodeToolsDefsErrorWhileWriting = 'Error while writing %s%s%s%s%s';
  lisCodeToolsDefsErrorWhileWritingProjectInfoFile = 'Error while writing '
    +'project info file %s%s%s%s%s';
  lisCodeToolsDefsReadError = 'Read error';
  lisUnableToRead = 'Unable to read %s';
  lisErrorReadingPackageListFromFile = 'Error reading package list from file%s%s%s%s';
  lisDuplicate = 'Duplicate';
  lisThePackageIsAlreadyInTheList = 'The package %s is already in the list';
  lisConflict = 'Conflict';
  lisThereIsAlreadyAPackageInTheList = 'There is already a package %s in the list';
  lisNotADesigntimePackage = 'Not a designtime package';
  lisThePackageCanNotBeInstalledBecauseItRequiresWhichI = 'The package %s can not be '
    +'installed, because it requires the package "%s", which is a runtime only package.';
  lisUninstall = 'Uninstall %s';
  lisThePackageIsNotADesignTimePackageItCanNotBeInstall = 'The package %s is '
    +'not a design time package. It can not be installed in the IDE';
  lisUninstallImpossible = 'Uninstall impossible';
  lisThePackageCanNotBeUninstalledBecauseItIsNeededByTh = 'The package %s can '
    +'not be uninstalled, because it is needed by the IDE itself.';
  lisCodeToolsDefsErrorReading = 'Error reading %s%s%s%s%s';
  lisCodeToolsDefsErrorReadingProjectInfoFile = 'Error reading project info '
    +'file %s%s%s%s%s';
  lisCodeToolsDefsNodeIsReadonly = 'Node is readonly';
  lisCodeToolsDefsAutoGeneratedNodesCanNotBeEdited = 'Auto generated nodes '
    +'can not be edited.';
  lisCodeToolsDefsInvalidPreviousNode = 'Invalid previous node';
  lisCodeToolsDefsPreviousNodeCanNotContainChildNodes = 'Previous node can '
    +'not contain child nodes.';
  lisCodeToolsDefsCreateFPCMacrosAndPathsForAFPCProjectDirectory = 'Create '
    +'FPC Macros and paths for a fpc project directory';
  lisCodeToolsDefsProjectDirectory = 'Project directory';
  lisCodeToolsDefsTheFreePascalProjectDirectory = 'The Free Pascal project '
    +'directory.';
  lisCodeToolsDefscompilerPath = 'Compiler path';
  lisCodeToolsDefsThePathToTheFreePascalCompilerForThisProject = 'The path to '
    +'the Free Pascal compiler for this project. Only required if you set the '
    +'FPC SVN source below. Used to autocreate macros.';
  lisCodeToolsDefsFPCSVNSourceDirectory = 'FPC SVN source directory';
  lisCodeToolsDefsTheFreePascalCVSSourceDirectory = 'The Free Pascal SVN source '
    +'directory. Not required. This will improve find declaration and debugging.';
  lisCodeToolsDefsCreateDefinesForFreePascalCompiler = 'Create Defines for '
    +'Free Pascal Compiler';
  lisCodeToolsDefsThePathToTheFreePascalCompilerForThisSourceUsedToA = 'The path to '
    +'the Free Pascal compiler for this source.%sUsed to autocreate macros.';
  lisCodeToolsDefsValueIsInvalid = '%s:%svalue "%s" is invalid.';
  lisCodeToolsDefsThePathToTheFreePascalCompilerForExample = 'The '
    +'path to the Free Pascal compiler.%s For example %s/usr/bin/%s -n%s '
    +'or %s/usr/local/bin/fpc @/etc/fpc.cfg%s.';
  lisCodeToolsDefsCreateDefinesForFreePascalSVNSources = 'Create Defines for '
    +'Free Pascal SVN Sources';
  lisCodeToolsDefsTheFreePascalSVNSourceDir = 'The Free Pascal SVN source '
    +'directory.';
  lisCodeToolsDefsCreateDefinesForLazarusDir = 'Create Defines for Lazarus '
    +'Directory';
  lisCodeToolsDefsLazarusDirectory = 'Lazarus Directory';
  lisCodeToolsDefsTheLazarusMainDirectory = 'The Lazarus main directory.';
  lisCodeToolsDefsCreateDefinesForDirectory = 'Create Defines for %s Directory';
  lisCodeToolsDefsdirectory = '%s directory';
  lisCodeToolsDefsDelphiMainDirectoryDesc = 'The %s main directory,%swhere '
    +'Borland has installed all %s sources.%sFor example: C:/Programme/'
    +'Borland/Delphi%s';
  lisCodeToolsDefsKylixMainDirectoryDesc = 'The %s main directory,%swhere '
    +'Borland has installed all %s sources.%sFor example: /home/user/kylix%s';
  lisCodeToolsDefsCreateDefinesForProject = 'Create Defines for %s Project';
  lisCodeToolsDefsprojectDirectory2 = '%s project directory';
  lisCodeToolsDefsTheProjectDirectory = 'The %s project directory,%swhich '
    +'contains the .dpr, dpk file.';
  lisCodeToolsDefsDelphiMainDirectoryForProject = 'The %s main directory,%'
    +'swhere Borland has installed all %s sources,%swhich are used by this %s '
    +'project.%sFor example: C:/Programme/Borland/Delphi%s';
  lisCodeToolsDefsKylixMainDirectoryForProject = 'The %s main directory,%'
    +'swhere Borland has installed all %s sources,%swhich are used by this %s '
    +'project.%sFor example: /home/user/kylix%s';
  lisCodeToolsDefsSaveAndExit = 'Save and Exit';
  lisCodeToolsDefsExitWithoutSave = 'Exit without Save';
  lisCodeToolsDefsMoveNodeUp = 'Move node up';
  lisCodeToolsDefsMoveNodeDown = 'Move node down';
  lisCodeToolsDefsMoveNodeOneLevelUp = 'Move node one level up';
  lisCodeToolsDefsMoveNodeOneLevelDown = 'Move node one level down';
  lisCodeToolsDefsInsertNodeBelow = 'Insert node below';
  lisCodeToolsDefsInsertNodeAsChild = 'Insert node as child';
  lisCodeToolsDefsDeleteNode = 'Delete node';
  lisCodeToolsDefsConvertNode = 'Convert node';
  lisCodeToolsDefsDefine = 'Define';
  lisCodeToolsDefsDefineRecurse = 'Define Recurse';
  lisCodeToolsDefsUndefine = 'Undefine';
  lisCodeToolsDefsUndefineRecurse = 'Undefine Recurse';
  lisCodeToolsDefsUndefineAll = 'Undefine All';
  lisCodeToolsDefsBlock = 'Block';
  lisCodeToolsDefsInsertBehindDirectory = 'Directory';
  lisCodeToolsDefsIf = 'If';
  lisCodeToolsDefsIfDef = 'IfDef';
  lisCodeToolsDefsIfNDef = 'IfNDef';
  lisCodeToolsDefsElseIf = 'ElseIf';
  lisCodeToolsDefsElse = 'Else';
  lisCTDefsTools = 'Tools';
  lisCTDefsOpenPreview = 'Open Preview';
  lisCodeToolsDefsInsertTemplate = 'Insert Template';
  lisCodeToolsDefsInsertFreePascalProjectTe = 'Insert Free Pascal Project Template';
  lisCodeToolsDefsInsertFreePascalCompilerT = 'Insert Free Pascal Compiler Template';
  lisCodeToolsDefsInsertFreePascalSVNSource = 'Insert Free Pascal SVN Source Template';
  lisCodeToolsDefsInsertLazarusDirectoryTem = 'Insert Lazarus Directory Template';
  lisCodeToolsDefsInsertDelphi5CompilerTemp = 'Insert Delphi 5 Compiler Template';
  lisCodeToolsDefsInsertDelphi5DirectoryTem = 'Insert Delphi 5 Directory Template';
  lisCodeToolsDefsInsertDelphi5ProjectTempl = 'Insert Delphi 5 Project Template';
  lisCodeToolsDefsInsertDelphi6CompilerTemp = 'Insert Delphi 6 Compiler Template';
  lisCodeToolsDefsInsertDelphi6DirectoryTem = 'Insert Delphi 6 Directory Template';
  lisCodeToolsDefsInsertDelphi6ProjectTempl = 'Insert Delphi 6 Project Template';
  lisCodeToolsDefsInsertDelphi7CompilerTemp = 'Insert Delphi 7 Compiler Template';
  lisCodeToolsDefsInsertDelphi7DirectoryTem = 'Insert Delphi 7 Directory Template';
  lisCodeToolsDefsInsertDelphi7ProjectTempl = 'Insert Delphi 7 Project Template';
  lisCodeToolsDefsInsertKylix3CompilerTemp = 'Insert Kylix 3 Compiler Template';
  lisCodeToolsDefsInsertKylix3DirectoryTem = 'Insert Kylix 3 Directory Template';
  lisCodeToolsDefsInsertKylix3ProjectTempl = 'Insert Kylix 3 Project Template';
  lisCodeToolsDefsSelectedNode = 'Selected Node:';
  lisCodeToolsDefsNodeAndItsChildrenAreOnly = 'Node and its children are only '
    +'valid for this project';
  lisCodeToolsDefsName = 'Name:';
  lisCodeToolsDefsDescription = 'Description:';
  lisCodeToolsDefsVariable = 'Variable:';
  lisAddValue = 'Add value:';
  lisCodeToolsDefsValueAsText = 'Value as Text';
  lisCodeToolsDefsValueAsFilePaths = 'Value as File Paths';
  lisCodeToolsDefsAction = 'Action: %s';
  lisCodeToolsDefsautoGenerated = '%s, auto generated';
  lisCodeToolsDefsprojectSpecific = '%s, project specific';
  lisCodeToolsDefsnoneSelected = 'none selected';
  lisCodeToolsDefsInvalidParent = 'Invalid parent';
  lisACanNotHoldTControlsYouCanOnlyPutNonVisualComponen = 'A %s can not hold '
    +'TControls.%sYou can only put non visual components on it.';
  lisUpdateReferences = 'Update references?';
  lisTheUnitIsUsedByOtherFilesUpdateReferencesAutomatic = 'The unit %s is '
    +'used by other files.%sUpdate references automatically?';
  lisCodeToolsDefsAutoCreatedNodesReadOnly = 'Auto created nodes can not be '
    +'edited,%snor can they have non auto created child nodes.';
  lisCodeToolsDefsInvalidParentNode = 'Invalid parent node';
  lisCodeToolsDefsParentNodeCanNotContainCh = 'Parent node can not contain child nodes.';
  lisCodeToolsDefsNewNode = 'NewNode';

  // code template dialog
  lisCodeTemplAddCodeTemplate = 'Add code template';
  lisCodeTemplAdd = 'Add template';
  lisCodeTemplEditCodeTemplate = 'Edit code template';
  lisCodeTemplAutoCompleteOn = 'Auto complete on';
  lisCodeTemplChange = 'Change';
  lisCodeTemplToken = 'Token:';
  lisCodeTemplComment = 'Comment:';
  lisCodeTemplATokenAlreadyExists = ' A token %s%s%s already exists! ';
  lisCodeTemplError = 'Error';
  lisUnableToFindTheComponentClassItIsNotRegisteredViaR = 'Unable to find the '
    +'component class "%s".%sIt is not registered via RegisterClass and no lfm'
    +' was found.%sIt is needed by unit:%s%s';
  lisNoTemplateSelected = 'no template selected';
  lisUnableToOpenDesignerTheClassDoesNotDescendFromADes = 'Unable to open '
    +'designer.%sThe class %s does not descend from a designable class like '
    +'TForm or TDataModule.';
  lisClassConflictsWithLfmFileTheUnitUsesTheUnitWhic = 'Class conflicts '
    +'with .lfm file:%sThe unit %s%suses the unit %s%swhich contains the '
    +'class %s,%sbut the .lfm file contains already another class.%sThere can '
    +'only be one design class per unit.%sPlease move %s to another unit.';
  lisUnableToLoadTheComponentClassBecauseItDependsOnIts = 'Unable to load the '
    +'component class %s%s%s, because it depends on itself.';
  lisCancelLoadingThisComponent = 'Cancel loading this component';
  lisAbortWholeLoading = 'Abort whole loading';
  lisIgnoreUseTFormAsAncestor = 'Ignore, use TForm as ancestor';
  lisTheResourceClassDescendsFromProbablyThisIsATypoFor = 'The resource '
    +'class %s%s%s descends from %s%s%s. Probably this is a typo for TForm.';

  // make resource string dialog
  lisMakeResourceString = 'Make ResourceString';
  lisMakeResStrInvalidResourcestringSect = 'Invalid Resourcestring section';
  lisMakeResStrPleaseChooseAResourcestring = 'Please choose a resourcestring '
    +'section from the list.';
  lisMakeResStrResourcestringAlreadyExis = 'Resourcestring already exists';
  lisMakeResStrChooseAnotherName = 'The resourcestring %s%s%s already exists.%'
    +'sPlease choose another name.%sUse Ignore to add it anyway.';
  lisMakeResStrStringConstantInSource = 'String constant in source';
  lisMakeResStrConversionOptions = 'Conversion Options';
  lisMakeResStrIdentifierPrefix = 'Identifier prefix:';
  lisMakeResStrIdentifierLength = 'Identifier length:';
  lisMakeResStrDialogIdentifier = 'Identifier';
  lisMakeResStrCustomIdentifier = 'Custom identifier';
  lisMakeResStrResourcestringSection = 'Resourcestring section:';
  lisMakeResStrStringsWithSameValue = 'Strings with same value:';
  lisMakeResStrAppendToSection = 'Append to section';
  lisMakeResStrInsertAlphabetically = 'Insert alphabetically';
  lisMakeResStrInsertContexttSensitive = 'Insert context sensitive';
  lisMakeResStrSourcePreview = 'Source preview';
  lisNoStringConstantFound = 'No string constant found';
  lisSuccess = 'Success';
  lisAllBlocksLooksOk = 'All blocks look ok.';
  lisTheApplicationBundleWasCreatedFor = 'The Application Bundle was created for "%s"';
  lisHintTheMakeResourcestringFunctionExpectsAStringCon = 'Hint: The "Make '
    +'Resourcestring" function expects a string constant.%sPlease select the '
    +'expression and try again.';

  // diff dialog
  lisDiffDlgText1 = 'Text1';
  lisDiffDlgOnlySelection = 'Only selection';
  lisDiffDlgText2 = 'Text2';
  lisDiffDlgCaseInsensitive = 'Case Insensitive';
  lisDiffDlgIgnoreIfEmptyLinesWereAdd = 'Ignore if empty lines were added or removed';
  lisDiffDlgIgnoreSpacesAtStartOfLine = 'Ignore spaces at start of line';
  lisDiffDlgIgnoreSpacesAtEndOfLine = 'Ignore spaces at end of line';
  lisDiffDlgIgnoreIfLineEndCharsDiffe = 'Ignore difference in line ends (e.'
    +'g. #10 = #13#10)';
  lisDiffDlgIgnoreIfSpaceCharsWereAdd = 'Ignore amount of space chars';
  lisDiffDlgIgnoreSpaces = 'Ignore spaces (newline chars not included)';
  lisDiffDlgOpenDiffInEditor = 'Open Diff in editor';

  // packages
  lisPkgFileTypeUnit = 'Unit';
  lisPkgFileTypeVirtualUnit = 'Virtual Unit';
  lisPkgFileTypeMainUnit = 'Main Unit';
  lisPkgFileTypeLFM = 'LFM - Lazarus form text';
  lisPkgFileTypeLRS = 'LRS - Lazarus resource';
  lisPkgFileTypeInclude = 'Include file';
  lisPkgFileTypeIssues = 'Issues xml file';
  lisPkgFileTypeText = 'Text';
  lisPkgFileTypeBinary = 'Binary';
  lisCreateNewPackage = '(Create new package)';
  lisCreateNewPackageComponent = 'Create new package component';
  lisMenuNewComponent = 'New Component';
  lisPkgSelectAPackage = 'Select a package';

  // view project units dialog
  lisViewProjectUnits = 'View Project Units';
  
  // unit info dialog
  lisInformationAboutUnit = 'Information about %s';
  lisUIDyes = 'yes';
  lisUIDno = 'no';
  lisUIDbytes = '%s bytes';
  lisUIDName = 'Name:';
  lisUIDType = 'Type:';
  lisUIDinProject = 'in Project:';
  lisUIDIncludedBy = 'Included by:';
  lisUIDPathsReadOnly = 'Paths (Read Only)';
  lisUIDUnit = 'Unit';
  lisUIDSize = 'Size:';
  lisUIDLines = 'Lines:';
  lisUIShowCodeToolsValues = 'Show CodeTools Values';
  
  // unit editor
  lisUEErrorInRegularExpression = 'Error in regular expression';
  lisSearchFor = 'Search For ';
  lisUENotFound = 'Not found';
  lisUESearchStringNotFound = 'Search string ''%s'' not found!';
  lisUESearchStringContinueBeg = 'Continue search from the beginning?';
  lisUESearchStringContinueEnd = 'Continue search from the end?';
  lisUEReplaceThisOccurrenceOfWith = 'Replace this occurrence of %s%s%s%s '
    +'with %s%s%s?';
  lisUESearching = 'Searching: %s';
  lisUEModeSeparator = '/';
  lisUEGotoLine = 'Goto line:';
  lisGotoLine = 'Goto Line';
  
  // Transfer Macros
  lisTMFunctionExtractFileExtension = 'Function: extract file extension';
  lisTMFunctionExtractFilePath = 'Function: extract file path';
  lisTMFunctionExtractFileNameExtension = 'Function: extract file name+extension';
  lisTMFunctionExtractFileNameOnly = 'Function: extract file name only';
  lisTMFunctionAppendPathDelimiter = 'Function: append path delimiter';
  lisTMFunctionChompPathDelimiter = 'Function: chomp path delimiter';
  lisTMunknownMacro = '(unknown macro: %s)';
  
  // System Variables Override Dialog
  lisSVUOInvalidVariableName = 'Invalid variable name';
  lisSVUOisNotAValidIdentifier = '%s%s%s is not a valid identifier.';
  lisFRIIdentifier = 'Identifier: %s';
  lisSVUOOverrideSystemVariable = 'Override system variable';
  
  // sort selection dialog
  lisSortSelSortSelection = 'Sort selection';
  lisSortSelPreview = 'Preview';
  lisSortSelAscending = 'Ascending';
  lisSortSelDescending = 'Descending';
  lisSortSelDomain = 'Domain';
  lisSortSelLines = 'Lines';
  lisSortSelWords = 'Words';
  lisSortSelParagraphs = 'Paragraphs';
  lisSortSelOptions = 'Options';
  lisSortSelCaseSensitive = '&Case Sensitive';
  lisSortSelIgnoreSpace = 'Ignore Space';
  lisSortSelSort = 'Accept';

  // publish project dialog
  lisPublProjInvalidIncludeFilter = 'Invalid include filter';
  lisPublProjInvalidExcludeFilter = 'Invalid exclude filter';

  // project options
  lisProjOptsUnableToChangeTheAutoCreateFormList = 'Unable to change the auto '
    +'create form list in the program source.%sPlease fix errors first.';
  lisProjOptsError = 'Error';
  lisUnableToChangeProjectTitleInSource = 'Unable to change project title in '
    +'source.%s%s';
  lisUnableToRemoveProjectTitleFromSource = 'Unable to remove project title '
    +'from source.%s%s';
  
  // path edit dialog
  lisPathEditSelectDirectory = 'Select directory';
  lisPathEditSearchPaths = 'Search paths:';
  lisPckSearchPathsForFpdocXmlFilesMultiplePathsMustBeSepa = 'Search paths for'
    +' fpdoc xml files. Multiple paths must be separated by semicolon.';
  lisPathEditMovePathDown = 'Move path down (Ctrl+Down)';
  lisPathEditMovePathUp = 'Move path up (Ctrl+Up)';
  lisPathEditBrowse = 'Browse';
  lisPathEditPathTemplates = 'Path templates';
  lisPathEditDeleteInvalidPaths = 'Delete Invalid Paths';
  
  // new dialog
  lisNewDlgNoItemSelected = 'No item selected';
  lisErrorOpeningComponent = 'Error opening component';
  lisUnableToOpenAncestorComponent = 'Unable to open ancestor component';
  lisNewDlgPleaseSelectAnItemFirst = 'Please select an item first.';
  lisNewDlgCreateANewEditorFileChooseAType = 'Create a new editor file.%s'
    +'Choose a type.';
  lisNewDlgCreateANewProjectChooseAType = 'Create a new project.%sChoose a type.';
  lisChooseOneOfTheseItemsToCreateANewFile = 'Choose one of these items to '
    +'create a new File';
  lisChooseOneOfTheseItemsToInheritFromAnExistingOne = 'Choose one of these items to '
    +'inherit from an existing one';
  lisInheritedItem = 'Inherited Item';
  lisChooseOneOfTheseItemsToCreateANewProject = 'Choose one of these items to '
    +'create a new Project';
  lisChooseOneOfTheseItemsToCreateANewPackage = 'Choose one of these items to '
    +'create a new Package';
  lisPackage = 'Package';
  lisNewDlgCreateANewPascalUnit = 'Create a new pascal unit.';
  lisNewDlgCreateANewUnitWithALCLForm = 'Create a new unit with a LCL form.';
  lisNewDlgCreateANewUnitWithADataModule = 'Create a new unit with a datamodule.';
  lisNewDlgCreateANewUnitWithAFrame = 'Create a new unit with a frame.';
  lisNewDlgCreateANewEmptyTextFile = 'Create a new empty text file.';
  lisNewDlgCreateANewGraphicalApplication = 'Create a new '
    +'graphical application.%sThe application source is maintained by Lazarus.';
  lisNewDlgCreateANewProgram = 'Create a new '
    +'program.%sThe program source is maintained by Lazarus.';
  lisNewDlgCreateANewCustomProgram = 'Create a new program.';
  lisNewCreateANewCgiApplicationTheProgramFileIsMaintained = 'Create a new '
    +'CGI application.%sThe application source is maintained by Lazarus.';
  lisNewDlgCreateANewStandardPackageAPackageIsACollectionOfUn = 'Create a new '
    +'standard package.%sA package is a collection of units and components.';

  // file checks
  lisUnableToCreateFile = 'Unable to create file';
  lisUnableToCreateFile4 = 'Unable to create file %s';
  lisCanNotCreateFile = 'Can not create file %s%s%s';
  lisExtendUnitPath = 'Extend unit path?';
  lisTheDirectoryIsNotYetInTheUnitPathAddIt = 'The directory %s%s%s is not '
    +'yet in the unit path.%sAdd it?';
  lisUnableToCreateFilename = 'Unable to create file %s%s%s.';
  lisUnableToWriteFile = 'Unable to write file';
  lisUnableToWriteToFile = 'Unable to write to file %s%s%s.';
  lisFileIsNotWritable = 'File is not writable';
  lisUnableToReadFile = 'Unable to read file';
  lisUnableToReadFilename = 'Unable to read file %s%s%s.';
  lisErrorDeletingFile = 'Error deleting file';
  lisInvalidMask = 'Invalid Mask';
  lisTheFileMaskIsNotAValidRegularExpression = 'The file mask "%s" is not a '
    +'valid regular expression.';
  lisTheFileMaskIsInvalid = 'The file mask "%s" is invalid.';
  lisUnableToDeleteAmbiguousFile = 'Unable to delete ambiguous file %s%s%s';
  lisErrorRenamingFile = 'Error renaming file';
  lisUnableToRenameAmbiguousFileTo = 'Unable to rename ambiguous file %s%s%s%'
    +'sto %s%s%s';
  lisWarningAmbiguousFileFoundSourceFileIs = 'Warning: ambiguous file found: %'
    +'s%s%s. Source file is: %s%s%s';
  lisAmbiguousFileFound = 'Ambiguous file found';
  lisThereIsAFileWithTheSameNameAndASimilarExtension = 'There is a file with '
    +'the same name and a similar extension ond disk%sFile: %s%sAmbiguous '
    +'File: %s%s%sDelete ambiguous file?';

  // add to project dialog
  lisProjAddInvalidMinMaxVersion = 'Invalid Min-Max version';
  lisProjAddTheMaximumVersionIsLowerThanTheMinimimVersion = 'The Maximum '
    +'Version is lower than the Minimim Version.';
  lisProjAddInvalidPackagename = 'Invalid packagename';
  lisProjAddThePackageNameIsInvalidPlaseChooseAnExistingPackag = 'The package '
    +'name %s%s%s is invalid.%sPlase choose an existing package.';
  lisProjAddDependencyAlreadyExists = 'Dependency already exists';
  lisUnableToAddTheDependencyBecauseThePackageHasAlread2 = 'Unable to add the '
    +'dependency %s, because the package %s has already a dependency to %s';
  lisVersionMismatch = 'Version mismatch';
  lisUnableToAddTheDependencyBecauseThePackageHasAlread = 'Unable to add the '
    +'dependency %s, because the package %s has already a dependency %s';
  lisCircularDependencyDetected = 'Circular dependency detected';
  lisUnableToAddTheDependencyBecauseThisWouldCreateA = 'Unable to add the '
    +'dependency %s, because this would create a circular dependency. Dependency %s';
  lisProjAddTheProjectHasAlreadyADependency = 'The project has already a '
    +'dependency for the package %s%s%s.';
  lisProjAddPackageNotFound = 'Package not found';
  lisLDTheUnitIsNotOwnedBeAnyPackageOrProjectPleaseAddThe = 'The unit %s is '
    +'not owned be any package or project.%sPlease add the unit to a package '
    +'or project.%sUnable to create the fpdoc file.';
  lisLDNoValidFPDocPath = 'No valid FPDoc path';
  lisTheUnitIsPartOfTheFPCSourcesButTheCorrespondingFpd = 'The unit %s is part'
    +' of the FPC sources, but the corresponding fpdoc xml file was not found.'
    +'%sEither you have not yet added the fpcdocs directory to the search path or the '
    +'unit is not yet documented.%sThe fpdoc files for the FPC sources can be'
    +' downloaded from: %s%sPlease add the directory in the '
    +'fpdoc editor options.%sIn order to create a new file the directory must '
    +'be writable.';
  lisLDDoesNotHaveAnyValidFPDocPathUnableToCreateTheFpdo = '%s does not have '
    +'any valid FPDoc path.%sUnable to create the fpdoc file for %s';
  lisErrorReadingXML = 'Error reading XML';
  lisErrorReadingXmlFile = 'Error reading xml file %s%s%s%s%s';
  lisPkgThisFileIsNotInAnyLoadedPackage = 'This file is not in any loaded package.';
  lisProjAddTheDependencyWasNotFound = 'The dependency %s%s%s was not found.%'
    +'sPlease choose an existing package.';
  lisProjAddInvalidVersion = 'Invalid version';
  lisProjAddTheMinimumVersionIsInvalid = 'The Minimum Version %s%s%s is '
    +'invalid.%sPlease use the format major.minor.release.build%sFor exmaple: 1.0.20.10';
  lisProjAddTheMaximumVersionIsInvalid = 'The Maximum Version %s%s%s is '
    +'invalid.%sPlease use the format major.minor.release.build%sFor exmaple: 1.0.20.10';
  lisProjAddInvalidPascalUnitName = 'Invalid pascal unit name';
  lisProjAddTheUnitNameIsNotAValidPascalIdentifier = 'The unit name %s%s%s is '
    +'not a valid pascal identifier.';
  lisProjAddUnitNameAlreadyExists = 'Unit name already exists';
  lisProjAddTheUnitNameAlreadyExistsInTheProject = 'The unit name %s%s%s '
    +'already exists in the project%swith file: %s%s%s.';
  lisProjAddTheUnitNameAlreadyExistsInTheSelection = 'The unit name %s%s%s '
    +'already exists in the selection%swith file: %s%s%s.';
  lisProjAddToProject = 'Add to Project';
  lisProjAddNewRequirement = 'New Requirement';
  lisProjAddEditorFile = 'Add Editor Files';
  lisProjFiles = 'Files:';
  lisProjAddAddFilesToProject = 'Add Files to Project';
  lisProjAddPackageName = 'Package Name:';
  lisProjAddMinimumVersionOptional = 'Minimum Version (optional):';
  lisProjAddMaximumVersionOptional = 'Maximum Version (optional):';
  
  // component palette
  lisKMNewPackage = 'New package';
  lisCompPalOpenPackage = 'Open package';
  lisKMOpenPackageFile = 'Open package file';
  lisCPOpenPackage = 'Open Package %s';
  lisCPOpenUnit = 'Open Unit %s';
  lisCompPalOpenUnit = 'Open unit';
  lisCompPalComponentList = 'View All';

  // macro promp dialog
  lisMacroPromptEnterData = 'Enter data';
  lisMacroPromptEnterRunParameters = 'Enter run parameters';
  
  // debugger
  lisDebuggerError = 'Debugger error';
  lisDebuggerErrorOoopsTheDebuggerEnteredTheErrorState = 'Debugger error%'
    +'sOoops, the debugger entered the error state%sSave your work now !%sHit '
    +'Stop, and hope the best, we''re pulling the plug.';
  lisExecutionStopped = 'Execution stopped';
  lisExecutionPaused = 'Execution paused';
  lisExecutionPausedAdress = 'Execution paused%s  Address: $%s%s  Procedure: %'
    +'s%s  File: %s%s(Some day an assembler window might popup here :)%s';
  lisFileNotFound = 'File not found';
  lisCleanUpUnitPath = 'Clean up unit path?';
  lisTheDirectoryIsNoLongerNeededInTheUnitPathRemoveIt = 'The directory %s%s%'
    +'s is no longer needed in the unit path.%sRemove it?';
  lisTheFileWasNotFoundDoYouWantToLocateItYourself = 'The file %s%s%s%swas '
    +'not found.%sDo you want to locate it yourself ?%s';
  lisRunToFailed = 'Run-to failed';
  lisDbgMangNoDebuggerSpecified = 'No debugger specified';
  lisDbgMangThereIsNoDebuggerSpecifiedSettingBreakpointsHaveNo = 'There is no '
    +'debugger specified.%sSetting breakpoints have no effect until you setup '
    +'a Debugger in the debugger options dialog in the menu.';
  lisDbgMangSetTheBreakpointAnyway = 'Set the breakpoint anyway';
  lisLaunchingApplicationInvalid = 'Launching application invalid';
  lisTheLaunchingApplicationDoesNotExistsOrIsNotExecuta = 'The launching '
    +'application %s%s%'
    +'s%sdoes not exist or is not executable.%s%sSee Run -> Run parameters -> Local';
  lisTheLaunchingApplicationBundleDoesNotExists = 'The Application Bundle %s'
    +'%sneeded for execution does not exist or is not executable.%sDo you want to create one?'
    +'%s%sSee Project -> Project Options -> Application for settings.';
  lisDebuggerInvalid = 'Debugger invalid';
  lisTheDebuggerDoesNotExistsOrIsNotExecutableSeeEnviro = 'The debugger %s%s%'
    +'s%sdoes not exist or is not executable.%s%sSee Tools -> Options -> Debugger options';
  lisUnableToRun = 'Unable to run';
  lisTheDestinationDirectoryDoesNotExistPleaseCheckTheP = 'The destination '
    +'directory %s%s%s does not exist.%sPlease check the project target file '
    +'name Menu > Project > Project Options.';
  lisTheWorkingDirectoryDoesNotExistPleaseCheckTheWorki = 'The working '
    +'directory %s%s%s does not exist.%sPlease check the working directory in '
    +'Menu > Run > Run parameters.';
  lisPleaseOpenAUnitBeforeRun = 'Please open a unit before run.';
  lisHitCount = 'Hitcount';
  lisDisableBreakPoint = 'Disable Breakpoint';
  lisEnableBreakPoint = 'Enable Breakpoint';
  lisDeleteBreakPoint = 'Delete Breakpoint';
  lisViewBreakPointProperties = 'Breakpoint Properties ...';

  lisDBGENDefaultColor = 'Default Color';
  lisDBGENBreakpointEvaluation = 'Breakpoint Evaluation';
  lisDBGENBreakpointHit = 'Breakpoint Hit';
  lisDBGENBreakpointMessage = 'Breakpoint Message';
  lisDBGENBreakpointStackDump = 'Breakpoint Stack Dump';
  lisDBGENExceptionRaised = 'Exception Raised';
  lisDBGENModuleLoad = 'Module Load';
  lisDBGENModuleUnload = 'Module Unload';
  lisDBGENOutputDebugString = 'Output Debug String';
  lisDBGENProcessExit = 'Process Exit';
  lisDBGENProcessStart = 'Process Start';
  lisDBGENThreadExit = 'Thread Exit';
  lisDBGENThreadStart = 'Thread Start';
  lisDBGENWindowsMessagePosted = 'Windows Message Posted';
  lisDBGENWindowsMessageSent = 'Windows Message Sent';

  // disk diff dialog
  lisDiskDiffErrorReadingFile = 'Error reading file: %s';
  lisLpkHasVanishedOnDiskUsingAsAlternative = 'lpk has vanished on disk. Using'
    +' as alternative%s';
  lisDiskDiffSomeFilesHaveChangedOnDisk = 'Some files have changed on disk:';
  lisDiskDiffChangedFiles = 'Changed files:';
  lisDiskDiffClickOnOneOfTheAboveItemsToSeeTheDiff = 'Click on one of the '
    +'above items to see the diff';
  lisDiskDiffRevertAll = 'Reload from disk';
  lisDiskDiffIgnoreDiskChanges = 'Ignore disk changes';
  
  // edit define tree
  lisEdtDefCurrentProject = 'Current Project';
  lisEdtDefCurrentProjectDirectory = 'Current Project Directory';
  lisEdtDefProjectSrcPath = 'Project SrcPath';
  lisEdtDefProjectIncPath = 'Project IncPath';
  lisEdtDefProjectUnitPath = 'Project UnitPath';
  lisEdtDefAllPackages = 'All packages';
  lisEdtDefsAllProjects = 'All projects';
  lisEdtDefsetFPCModeToDELPHI = 'set FPC mode to DELPHI';
  lisEdtDefsetFPCModeToTP = 'set FPC mode to TP';
  lisEdtDefsetFPCModeToGPC = 'set FPC mode to GPC';
  lisEdtDefsetFPCModeToMacPas = 'set FPC mode to MacPas';
  lisEdtDefsetFPCModeToFPC = 'set FPC mode to FPC';
  lisEdtDefsetIOCHECKSOn = 'set IOCHECKS on';
  lisEdtDefsetRANGECHECKSOn = 'set RANGECHECKS on';
  lisEdtDefsetOVERFLOWCHECKSOn = 'set OVERFLOWCHECKS on';
  lisEdtDefuseLineInfoUnit = 'use LineInfo unit';
  lisEdtDefuseHeapTrcUnit = 'use HeapTrc unit';
  lisEdtDefGlobalSourcePathAddition = 'Global Source Path addition';
  
  // external tools
  lisExtToolFailedToRunTool = 'Failed to run tool';
  lisExtToolUnableToRunTheTool = 'Unable to run the tool %s%s%s:%s%s';
  lisProgramNotFound = 'Program %s not found';
  lisWorkingDirectoryNotFound = 'Working directory %s not found';
  lisExtToolExternalTools = 'External Tools';
  lisTheseSettingsAreStoredWithTheProject = 'These settings are stored with '
    +'the project.';
  lisKeepThemAndContinue = 'Keep them and continue';
  lisRemoveThem = 'Remove them';
  lisExtToolMaximumToolsReached = 'Maximum Tools reached';
  lisExtToolThereIsAMaximumOfTools = 'There is a maximum of %s tools.';
  lisExtToolTitleCompleted = '"%s" completed';

  // edit external tools
  lisEdtExtToolEditTool = 'Edit Tool';
  lisEdtExtToolProgramfilename = 'Program Filename:';
  lisEdtExtToolParameters = 'Parameters:';
  lisEdtExtToolWorkingDirectory = 'Working Directory:';
  lisEdtExtToolScanOutputForFreePascalCompilerMessages = 'Scan output for '
    +'Free Pascal Compiler messages';
  lisEdtExtToolScanOutputForMakeMessages = 'Scan output for make messages';
  lisEdtExtToolHideMainForm = 'Hide main form';
  lisEdtExtToolKey = 'Key';
  lisAlternativeKey = 'Alternative key';
  lisEdtExtToolCtrl = 'Ctrl';
  lisEdtExtToolAlt = 'Alt';
  lisEdtExtToolShift = 'Shift';
  lisEdtExtToolMacros = 'Macros';
  lisWorkingDirectoryForBuilding = 'Working directory for building';
  lisWorkingDirectoryForRun = 'Working directory for run';
  lisConfigureBuild = 'Configure Build %s';
  lisEdtExtToolTitleAndFilenameRequired = 'Title and Filename required';
  lisEdtExtToolAValidToolNeedsAtLeastATitleAndAFilename = 'A valid tool needs '
    +'at least a title and a filename.';
    
  // find in files dialog
  lisFindFileMultiLinePattern = '&Multiline pattern';
  lisFindFileWhere = 'Where';
  lisFindFilesearchAllFilesInProject = 'search all files in &project';
  lisFindFilesearchAllOpenFiles = 'search all &open files';
  lisFindFilesearchInActiveFile = 'search in &active file';
  lisFindFilesearchInDirectories = 'search in &directories';
  lisFindFileDirectoryOptions = 'Directory options';
  lisFindFileDirectory = 'D&irectory';
  lisFindFileFileMask = 'Fi&le mask';
  lisFindFileIncludeSubDirectories = 'Include &sub directories';
  lisFindFileOnlyTextFiles = 'Only text files';

  // package manager
  lisPkgMangPackage = 'Package: %s';
  lisPkgMangProject = 'Project: %s';
  lisPkgMangDependencyWithoutOwner = 'Dependency without Owner: %s';
  lisPkgMangSavePackageLpk = 'Save Package %s (*.lpk)';
  lisPkgMangInvalidPackageFileExtension = 'Invalid package file extension';
  lisPkgMangPackagesMustHaveTheExtensionLpk = 'Packages must have the '
    +'extension .lpk';
  lisPkgMangInvalidPackageName = 'Invalid package name';
  lisPkgMangThePackageNameIsNotAValidPackageNamePleaseChooseAn = 'The package '
    +'name %s%s%s is not a valid package name%sPlease choose another name (e.'
    +'g. package1.lpk)';
  lisPkgMangRenameFileLowercase = 'Rename File lowercase?';
  lisPkgMangShouldTheFileRenamedLowercaseTo = 'Should the file be renamed '
    +'lowercase to%s%s%s%s?';
  lisPkgMangPackageNameAlreadyExists = 'Package name already exists';
  lisNameConflict = 'Name conflict';
  lisThePackageAlreadyContainsAUnitWithThisName = 'The package already '
    +'contains a unit with this name.';
  lisPkgMangThereIsAlreadyAnotherPackageWithTheName = 'There is already '
    +'another package with the name %s%s%s.%sConflict package: %s%s%s%sFile: %s%s%s';
  lisPkgMangFilenameIsUsedByProject = 'Filename is used by project';
  lisPkgMangTheFileNameIsPartOfTheCurrentProject = 'The file name %s%s%s is '
    +'part of the current project.%sProjects and Packages should not share files.';
  lisPkgMangFilenameIsUsedByOtherPackage = 'Filename is used by other package';
  lisPkgMangTheFileNameIsUsedByThePackageInFile = 'The file name %s%s%s is '
    +'used by%sthe package %s%s%s%sin file %s%s%s.';
  lisPkgMangReplaceFile = 'Replace File';
  lisPkgMangReplaceExistingFile = 'Replace existing file %s%s%s?';
  lisPkgMangDeleteOldPackageFile = 'Delete Old Package File?';
  lisPkgMangDeleteOldPackageFile2 = 'Delete old package file %s%s%s?';
  lisPkgMangDeleteFailed = 'Delete failed';
  lisAmbiguousUnitFound = 'Ambiguous Unit found';
  lisTheFileWasFoundInOneOfTheSourceDirectoriesOfThePac = 'The file %s%s%s%s'
    +'was found in one of the source directories of the package %s and looks '
    +'like a compiled unit. Compiled units must be in the output directory of '
    +'the package, otherwise other packages can get problems using this '
    +'package.%s%sDelete ambiguous file?';
  lisPkgMangUnableToDeleteFile = 'Unable to delete file %s%s%s.';
  lisSkipErrors = 'Skip errors';
  lisDeleteAllTheseFiles = 'Delete all these files?';
  lisPkgMangUnsavedPackage = 'Unsaved package';
  lisFpcmakeFailed = 'fpcmake failed';
  lisCallingToCreateMakefileFromFailed = 'Calling %s to create Makefile from %s failed.';
  lisPkgMangThereIsAnUnsavedPackageInTheRequiredPackages = 'There is an '
    +'unsaved package in the required packages. See package graph.';
  lisPkgMangBrokenDependency = 'Broken dependency';
  lisPkgMangTheProjectRequiresThePackageButItWasNotFound = 'The project '
    +'requires the package %s%s%s.%sBut it was not found. See Project -> '
    +'Project Inspector.';
  lisPkgMangRequiredPackagesWereNotFound = 'One or more required packages were not '
    +'found. See package graph for details.';
  lisPkgMangCircularDependencies = 'Circular dependencies found';
  lisPkgMangThePackageIsCompiledAutomaticallyAndItsOutputDirec = 'The package '
    +'%s is compiled automatically and its output directory is "%s", which is '
    +'in the default unit search path of the compiler. The package uses other '
    +'packages which also uses the default unit search of the compiler. This '
    +'creates an endless loop.%sYou can fix this issue%sby removing the path from '
    +'your compiler config (e.g. fpc.cfg)%sor by disabling the auto update of '
    +'this package%sor by removing dependencies.';
  lisPkgMangThereIsACircularDependency = 'There is a circular dependency in the '
    +'packages. See package graph.';
  lisPkgMangThereAreTwoUnitsWithTheSameName1From2From = 'There are two units '
    +'with the same name:%s%s1. %s%s%s from %s%s2. %s%s%s from %s%s%s';
  lisPkgMangThereIsAUnitWithTheSameNameAsAPackage1From2 = 'There is a unit '
    +'with the same name as a package:%s%s1. %s%s%s from %s%s2. %s%s%s%s';
  lisPkgMangAmbiguousUnitsFound = 'Ambiguous units found';
  lisPkgMangBothPackagesAreConnectedThisMeansEitherOnePackageU = '%sBoth '
    +'packages are connected. This means, either one package uses the other, '
    +'or they are both used by a third package.';
  lisPkgMangThereIsAFPCUnitWithTheSameNameFrom = 'There is a FPC unit with '
    +'the same name as:%s%s%s%s%s from %s%s%s';
  lisPkgMangThereIsAFPCUnitWithTheSameNameAsAPackage = 'There is a FPC unit '
    +'with the same name as a package:%s%s%s%s%s%s';
  lisPkgMangErrorWritingFile = 'Error writing file';
  lisProjMangUnableToWriteStateFileForProjectError = 'Unable to write state '
    +'file for project %s%sError: %s';
  lisPkgMangUnableToWriteStateFileOfPackageError = 'Unable to write state '
    +'file %s%s%s%sof package %s.%sError: %s';
  lisPkgMangErrorReadingFile = 'Error reading file';
  lisProjMangUnableToReadStateFileOfProjectError = 'Unable to read state '
    +'file %s of project %s%sError: %s';
  lisPkgMangUnableToReadStateFileOfPackageError = 'Unable to read state file %'
    +'s%s%s%sof package %s.%sError: %s';
  lisPkgMangUnableToCreateDirectory = 'Unable to create directory';
  lisUnableToCreateDirectory2 = 'Unable to create directory %s%s%s';
  lisPkgMangUnableToCreateOutputDirectoryForPackage = 'Unable to create '
    +'output directory %s%s%s%sfor package %s.';
  lisPkgMangUnableToDeleteFilename = 'Unable to delete file';
  lisPkgMangUnableToDeleteOldStateFileForPackage = 'Unable to delete old '
    +'state file %s%s%s%sfor package %s.';
  lisPkgMangUnableToCreatePackageSourceDirectoryForPackage = 'Unable to '
    +'create package source directory %s%s%s%sfor package %s.';
  lisPkgMangUnableToLoadPackage = 'Unable to load package';
  lisPkgMangUnableToOpenThePackage = 'Unable to open the package %s%s%s.%'
    +'sThis package was marked for installation.';
  lisPkgMangInvalidPackageName2 = 'Invalid Package Name';
  lisOpenPackage2 = 'Open package %s';
  lisPkgMangThePackageNameOfTheFileIsInvalid = 'The package name %s%s%s of%'
    +'sthe file %s%s%s is invalid.';
  lisLazbuildIsNonInteractiveAbortingNow = '%s%s%s%slazbuild is non '
    +'interactive, aborting now.';
  lisPkgMangPackageConflicts = 'Package conflicts';
  lisPkgMangThereIsAlreadyAPackageLoadedFromFile = 'There is already a '
    +'package %s%s%s loaded%sfrom file %s%s%s.%sSee Package -> Package '
    +'Graph.%sReplace is impossible.';
  lisPkgMangSavePackage = 'Save package?';
  lisPkgMangLoadingPackageWillReplacePackage = 'Loading package %s will '
    +'replace package %s%sfrom file %s.%sThe old package is modified.%s%sSave '
    +'old package %s?';
  lisPkgMangNewPackage = 'NewPackage';
  lisProbablyYouNeedToInstallSomePackagesForBeforeConti = 'Probably you need '
    +'to install some packages before continuing.%s%sWarning:%sThe '
    +'project uses the following design time packages, which might be needed '
    +'to open the form in the designer. If you continue, you might get errors '
    +'about missing components and the form loading will probably create very '
    +'unpleasant results.%s%sIt is recommended to cancel and install these packages first.%s%s';
  lisPackageNeedsInstallation = 'Package needs installation';
  lisUnitInPackage = '%s unit %s in package %s%s';
  lisPkgMangSkipThisPackage = 'Skip this package';
  lisPkgMangInvalidFileExtension = 'Invalid file extension';
  lisPkgMangTheFileIsNotALazarusPackage = 'The file %s%s%s is not a lazarus package.';
  lisPkgMangInvalidPackageFilename = 'Invalid package filename';
  lisPkgMangThePackageFileNameInIsNotAValidLazarusPackageName = 'The package '
    +'file name %s%s%s in%s%s%s%s is not a valid lazarus package name.';
  lisPkgMangFileNotFound = 'File %s%s%s not found.';
  lisPkgMangErrorReadingPackage = 'Error Reading Package';
  lisPkgUnableToReadPackageFileError = 'Unable to read package file %s%s%s.%sError: %s';
  lisPkgMangFilenameDiffersFromPackagename =
    'Filename differs from Packagename';
  lisPkgMangTheFilenameDoesNotCorrespondToThePackage = 'The filename %s%s%s '
    +'does not correspond to the package name %s%s%s in the file.%sChange '
    +'package name to %s%s%s?';
  lisSuspiciousIncludePath = 'Suspicious include path';
  lisThePackageAddsThePathToTheIncludePathOfTheIDEThisI = 'The package %s '
    +'adds the path "%s" to the include path of the IDE.%sThis is probably a '
    +'misconfiguration of the package.';
  lisPkgMangErrorWritingPackage = 'Error Writing Package';
  lisPkgMangUnableToWritePackageToFileError = 'Unable to write package %s%s%s%'
    +'sto file %s%s%s.%sError: %s';
  lisSeeProjectProjectInspector = '%sSee Project -> Project Inspector';
  lisPkgMangTheFollowingPackageFailedToLoad = 'The following package failed to load:';
  lisPkgMangTheFollowingPackagesFailedToLoad = 'The following packages failed to load:';
  lisMissingPackages = 'Missing Packages';
  lisPkgManginvalidCompilerFilename = 'invalid Compiler filename';
  lisPkgMangTheCompilerFileForPackageIsNotAValidExecutable = 'The compiler '
    +'file for package %s is not a valid executable:%s%s';
  lisPkgMangPackageHasNoValidOutputDirectory = 'Package %s%s%s has no valid '
    +'output directory:%s%s%s%s';
  lisPkgMangpackageMainSourceFile = 'package main source file';
  lisErrorLoadingFile = 'Error loading file';
  lisLoadingFailed = 'Loading %s failed.';
  lisPkgMangAddingNewDependencyForProjectPackage = '%sAdding new Dependency '
    +'for project %s: package %s%s';
  lisPkgMangAddingNewDependencyForPackagePackage = '%sAdding new Dependency '
    +'for package %s: package %s%s';
  lisPkgMangTheFollowingUnitsWillBeAddedToTheUsesSectionOf = '%sThe following '
    +'units will be added to the uses section of%s%s:%s%s%s';
  lisConfirmChanges = 'Confirm changes';
  lisPkgMangFileNotSaved = 'File not saved';
  lisPkgMangPleaseSaveTheFileBeforeAddingItToAPackage = 'Please save the file '
    +'before adding it to a package.';
  lisPkgMangFileIsInProject = 'File is in Project';
  lisPkgMangWarningTheFileBelongsToTheCurrentProject = 'Warning: The file %s%'
    +'s%s%sbelongs to the current project.';
  lisPkgMangFileIsAlreadyInPackage = 'File is already in package';
  lisPkgMangTheFileIsAlreadyInThePackage = 'The file %s%s%s%sis already in '
    +'the package %s.';
  lisPkgMangPackageIsNoDesigntimePackage = 'Package is no designtime package';
  lisPkgMangThePackageIsARuntimeOnlyPackageRuntimeOnlyPackages = 'The package %'
    +'s is a runtime only package.%sRuntime only packages can not be '
    +'installed in the IDE.';
  lisPkgMangAutomaticallyInstalledPackages = 'Automatically installed packages';
  lisPkgMangInstallingThePackageWillAutomaticallyInstallThePac2 = 'Installing '
    +'the package %s will automatically install the packages:';
  lisPkgMangInstallingThePackageWillAutomaticallyInstallThePac = 'Installing '
    +'the package %s will automatically install the package:';
  lisPkgMangRebuildLazarus = 'Rebuild Lazarus?';
  lisPkgMangThePackageWasMarkedForInstallationCurrentlyLazarus = 'The package %'
    +'s%s%s was marked for installation.%sCurrently lazarus only supports '
    +'static linked packages. The real installation needs rebuilding and '
    +'restarting of lazarus.%s%sDo you want to rebuild Lazarus now?';
  lisPkgMangPackageIsRequired = 'Package is required';
  lisPkgMangThePackageIsRequiredByWhichIsMarkedForInstallation = 'The package %'
    +'s is required by %s, which is marked for installation.%sSee package graph.';
  lisPkgMangUninstallPackage = 'Uninstall package?';
  lisPkgMangUninstallPackage2 = 'Uninstall package %s?';
  lisPkgMangThePackageWasMarkedCurrentlyLazarus = 'The package %s%s%s was '
    +'marked.%sCurrently lazarus only supports static linked packages. The '
    +'real un-installation needs rebuilding and restarting of lazarus.%s%'
    +'sDo you want to rebuild Lazarus now?';
  lisPkgMangThisIsAVirtualPackageItHasNoSourceYetPleaseSaveThe = 'This is a '
    +'virtual package. It has no source yet. Please save the package first.';
  lisPkgMangPleaseCompileThePackageFirst = 'Please compile the package first.';
  lisPkgMangThePackageIsMarkedForInstallationButCanNotBeFound = 'The package %'
    +'s%s%s is marked for installation, but can not be found.%sRemove '
    +'dependency from the installation list of packages?';
  lisERRORInvalidBuildMode = 'ERROR: invalid build mode "%s"';
  lisAvailableProjectBuildModes = 'Available project build modes:';
  lisThisProjectHasOnlyTheDefaultBuildMode = 'This project has only the '
    +'default build mode.';
  lisPkgMangstaticPackagesConfigFile = 'static packages config file';
  lisPkgMangUnableToCreateTargetDirectoryForLazarus = 'Unable to create '
    +'target directory for lazarus:%s%s%s%s.%sThis directory is needed for '
    +'the new changed lazarus IDE with your custom packages.';
  lisPkgMangCompilingPackage = 'Compiling package %s';
  lisPkgMangErrorUpdatingPoFilesFailedForPackage = 'Error: updating po files '
    +'failed for package %s';
  lisIDEInfoErrorRunningCompileAfterToolFailedForPackage = 'Error: running ''co'
    +'mpile after'' tool failed for package %s';
  lisIDEInfoCreatingMakefileForPackage = 'Creating Makefile for package %s';
  lisIDEInfoWARNINGUnitNameInvalidPackage = 'WARNING: unit name invalid %s, package=%s';

  // package system
  lisPkgSysInvalidUnitname = 'Invalid Unitname: %s';
  lisPkgSysUnitWasNotFoundInTheLpkFileProbablyThisLpkFileWasN = 'Unit "%s" was'
    +' not found in the lpk file.%sProbably this lpk file was not used for '
    +'building this IDE. Or the package misuses the procedure RegisterUnit.';
  lisPkgSysUnitWasRemovedFromPackageLpk = 'Unit "%s" was removed from package (lpk)';
  lisPkgSysCanNotRegisterComponentsWithoutUnit = 'Can not register components '
    +'without unit';
  lisPkgSysInvalidComponentClass = 'Invalid component class';
  lisPkgSysComponentClassAlreadyDefined = 'Component Class %s%s%s already defined';
  lisPkgSysRegisterUnitWasCalledButNoPackageIsRegistering = 'RegisterUnit was '
    +'called, but no package is registering.';
  lisPkgSysUnitName = '%s%sUnit Name: %s%s%s';
  lisPkgSysFileName = '%s%sFile Name: %s%s%s';
  lisPkgSysLPKFilename = '%s%slpk file: %s%s%s';
  lisPkgSysTheLpkFileWasNotFound = '%s%sThe lpk file was not found.';
  lisPkgSysPackageRegistrationError = 'Package registration error';
  lisPkgSysTheRTLFreePascalComponentLibraryProvidesTheBase = 'The RTL - '
    +'The Run-Time Library is the basis of all Free Pascal programs.';
  lisPkgSysTheFCLFreePascalComponentLibraryProvidesTheBase = 'The FCL - '
    +'Free Pascal Component Library provides the base classes for Object Pascal.';
  lisPkgSysTheLCLLazarusComponentLibraryContainsAllBase = 'The LCL - Lazarus '
    +'Component Library contains all base components for form editing.';
  lisPkgSysSynEditTheEditorComponentUsedByLazarus = 'SynEdit - the editor '
    +'component used by Lazarus. http://sourceforge.net/projects/synedit/';
  lisPkgSysCodeToolsToolsAndFunctionsToParseBrowseAndEditPasc = 'CodeTools - '
    +'tools and functions to parse, browse and edit pascal sources';
  lisPkgSysThisIsTheDefaultPackageUsedOnlyForComponents = 'This is the '
    +'default package. Used only for components without a package. These '
    +'components are outdated.';
  lisPkgSysRegisterProcedureIsNil = 'Register procedure is nil';
  lisPkgSysThisPackageIsInstalledButTheLpkFileWasNotFound = 'This package is '
    +'installed, but the lpk file was not found. All its components are '
    +'deactivated. Please fix this.';
  lisPkgSysPackageFileNotFound = 'Package file not found';
  lisPkgMangTheFileOfPackageWasNotFound = 'The file "%s" of package %s was not'
    +' found.';
  lisPkgSysThePackageIsInstalledButNoValidPackageFileWasFound = 'The package %'
    +'s%s%s is installed, but no valid package file (.lpk) was found.%sA broken '
    +'dummy package was created.';

  // package defs
  lisPkgDefsOutputDirectory = 'Output directory';
  lisPkgDefsCompiledSrcPathAddition = 'CompiledSrcPath addition';
  lisPkgDefsUnitPath = 'Unit Path';
  lisProjProjectSourceDirectoryMark = 'Project Source Directory Mark';
  lisPkgDefsSrcDirMark = 'Package Source Directory Mark';

  // add active file to package dialog
  lisAF2PInvalidPackage = 'Invalid Package';
  lisAF2PInvalidPackageID = 'Invalid package ID: %s%s%s';
  lisAF2PPackageNotFound = 'Package %s%s%s not found.';
  lisAF2PPackageIsReadOnly = 'Package is read only';
  lisAF2PThePackageIsReadOnly = 'The package %s is read only.';
  lisAF2PTheFileIsAlreadyInThePackage = 'The file %s%s%s%sis already in the package %s.';
  lisAF2PUnitName = 'Unit name: ';
  lisAF2PHasRegisterProcedure = 'Has Register procedure';
  lisAF2PIsVirtualUnit = 'Virtual unit (source is not in package)';
  lisAF2PFileType = 'File type';
  lisPEExpandDirectory = 'Expand directory';
  lisPECollapseDirectory = 'Collapse directory';
  lisPEUseAllUnitsInDirectory = 'Use all units in directory';
  lisPEUseNoUnitsInDirectory = 'Use no units in directory';
  lisAF2PDestinationPackage = 'Destination package';
  lisAF2PShowAll = 'Show all';
  lisAF2PAddFileToAPackage = 'Add File to Package';
  
  // add to package dialog
  lisA2PInvalidFilename = 'Invalid filename';
  lisA2PTheFilenameIsAmbiguousPleaseSpecifiyAFilename = 'The filename %s%s%s '
    +'is ambiguous, because the package has no default directory yet.%s'
    +'Please specify a filename with full path.';
  lisA2PFileNotUnit = 'File not unit';
  lisA2PPascalUnitsMustHaveTheExtensionPPOrPas = 'Pascal units must have the '
    +'extension .pp or .pas';
  lisA2PisNotAValidUnitName = '%s%s%s is not a valid unit name.';
  lisA2PUnitnameAlreadyExists = 'Unitname already exists';
  lisA2PTheUnitnameAlreadyExistsInThisPackage = 'The unitname %s%s%s already '
    +'exists in this package.';
  lisA2PTheUnitnameAlreadyExistsInThePackage = 'The unitname %s%s%s already '
    +'exists in the package:%s%s';
  lisA2PFileAlreadyExistsInThePackage = 'File %s%s%s already exists in the package.';
  lisA2PAmbiguousUnitName = 'Ambiguous Unit Name';
  lisA2PTheUnitNameIsTheSameAsAnRegisteredComponent = 'The unit name %s%s%s '
    +'is the same as an registered component.%sUsing this can cause strange '
    +'error messages.';
  lisA2PExistingFile2 = 'Existing file: %s%s%s';
  lisA2PFileAlreadyExists = 'File already exists';
  lisA2PFileIsUsed = 'File is used';
  lisA2PTheFileIsPartOfTheCurrentProjectItIsABadIdea = 'The file %s%s%s is '
    +'part of the current project.%sIt is a bad idea to share files between '
    +'projects and packages.';
  lisA2PTheMaximumVersionIsLowerThanTheMinimimVersion = 'The Maximum Version '
    +'is lower than the Minimim Version.';
  lisA2PThePackageNameIsInvalidPleaseChooseAnExisting = 'The package name %s%s%'
    +'s is invalid.%sPlease choose an existing package.';
  lisA2PThePackageHasAlreadyADependencyForThe = 'The package has already a '
    +'dependency for the package %s%s%s.';
  lisA2PNoPackageFoundForDependencyPleaseChooseAnExisting = 'No package found '
    +'for dependency %s%s%s.%sPlease choose an existing package.';
  lisA2PInvalidUnitName = 'Invalid Unit Name';
  lisA2PTheUnitNameAndFilenameDiffer = 'The unit name %s%s%s%sand filename %s%'
    +'s%s differ.';
  lisA2PFileAlreadyInPackage = 'File already in package';
  lisA2PTheFileIsAlreadyInThePackage = 'The file %s%s%s is already in the package.';
  lisA2PInvalidFile = 'Invalid file';
  lisA2PAPascalUnitMustHaveTheExtensionPPOrPas = 'A pascal unit must have the '
    +'extension .pp or .pas';
  lisA2PInvalidAncestorType = 'Invalid Ancestor Type';
  lisA2PTheAncestorTypeIsNotAValidPascalIdentifier = 'The ancestor type %s%s%'
    +'s is not a valid pascal identifier.';
  lisA2PPageNameTooLong = 'Page Name too long';
  lisA2PThePageNameIsTooLongMax100Chars = 'The page name %s%s%s is too long ('
    +'max 100 chars).';
  lisA2PUnitNameInvalid = 'Unit Name Invalid';
  lisA2PTheUnitNameDoesNotCorrespondToTheFilename = 'The unit name %s%s%s '
    +'does not correspond to the filename.';
  lisA2PInvalidClassName = 'Invalid Class Name';
  lisA2PTheClassNameIsNotAValidPascalIdentifier = 'The class name %s%s%s is '
    +'not a valid pascal identifier.';
  lisA2PInvalidCircularDependency = 'Invalid Circular Dependency';
  lisA2PTheClassNameAndAncestorTypeAreTheSame = 'The class name %s%s%s and '
    +'ancestor type %s%s%s are the same.';
  lisA2PAmbiguousAncestorType = 'Ambiguous Ancestor Type';
  lisA2PTheAncestorTypeHasTheSameNameAsTheUnit = 'The ancestor type %s%s%s '
    +'has the same name as%sthe unit %s%s%s.';
  lisA2PAmbiguousClassName = 'Ambiguous Class Name';
  lisA2PTheClassNameHasTheSameNameAsTheUnit = 'The class name %s%s%s has the '
    +'same name as%sthe unit %s%s%s.';
  lisA2PClassNameAlreadyExists = 'Class Name already exists';
  lisA2PTheClassNameExistsAlreadyInPackageFile = 'The class name %s%s%s '
    +'exists already in%sPackage %s%sFile: %s%s%s';
  lisA2PTheMinimumVersionIsInvalidPleaseUseTheFormatMajor = 'The Minimum '
    +'Version %s%s%s is invalid.%sPlease use the format major.minor.release.'
    +'build%sFor exmaple: 1.0.20.10';
  lisA2PTheMaximumVersionIsInvalidPleaseUseTheFormatMajor = 'The Maximum '
    +'Version %s%s%s is invalid.%sPlease use the format major.minor.release.'
    +'build%sFor exmaple: 1.0.20.10';
  lisA2PAddUnit = 'Add Unit';
  lisA2PNewFile = 'New File';
  lisA2PNewComponent = 'New Component';
  lisA2PAddFile = 'Add File';
  lisA2PAddFiles = 'Add Files';
  lisA2PUnitFileName = 'Unit file name:';
  lisA2PchooseAnExistingFile = '<choose an existing file>';
  lisA2PAddLFMLRSFilesIfTheyExist = 'Add LFM, LRS files, if they exist';
  lisA2PUpdateUnitNameAndHasRegisterProcedure = 'Scan Unit for Unit Name and '
    +'Register procedure';
  lisA2PAncestorType = 'Ancestor Type';
  lisA2PShowAll = 'Show all';
  lisA2PNewClassName = 'New class name:';
  lisA2PPalettePage = 'Palette Page:';
  lisA2PUnitFileName2 = 'Unit File Name:';
  lisA2PUnitName = 'Unit Name:';
  lisA2PShortenOrExpandFilename = 'Shorten or expand filename';
  lisA2PSaveFileDialog = 'Save file dialog';
  lisA2PFileName = 'File name:';
  lisMoveSelectedUp = 'Move selected item up (Ctrl+Up)';
  lisMoveSelectedDown = 'Move selected item down (Ctrl+Down)';

  // broken dependencies dialog
  lisBDDChangingThePackageNameOrVersionBreaksDependencies = 'Changing the '
    +'package name or version breaks dependencies. Should these dependencies '
    +'be changed as well?%sSelect Yes to change all listed dependencies.%'
    +'sSelect Ignore to break the dependencies and continue.';
  lisA2PDependency = 'Dependency';
  lisA2PBrokenDependencies = 'Broken Dependencies';
  
  // open installed packages dialog
  lisOIPFilename = 'Filename:  %s';
  lisCurrentState = 'Current state: ';
  lisInstalled = 'installed';
  lisNotInstalled = 'not installed';
  lisOIPThisPackageIsInstalledButTheLpkFileWasNotFound = '%sThis package is '
    +'installed, but the lpk file was not found';
  lisOIPDescriptionDescription = '%sDescription:  %s';
  lisOIPDescription = 'Description:  ';
  lisOIPPleaseSelectAPackage = 'Please select a package';
  lisOIPPackageName = 'Package Name';
  lisOIPState = 'State';
  lisOIPmodified = 'modified';
  lisOIPmissing = 'missing';
  lisOIPinstalledStatic = 'installed static';
  lisOIPinstalledDynamic = 'installed dynamic';
  lisOIPautoInstallStatic = 'auto install static';
  lisOIPautoInstallDynamic = 'auto install dynamic';
  lisOIPreadonly = 'readonly';
  lisOIPOpenLoadedPackage = 'Open Loaded Package';
  
  // package editor
  lisPckEditRemoveFile = 'Remove file';
  lisPEMoveFileUp = 'Move file up';
  lisPEMoveFileDown = 'Move file down';
  lisPckEditReAddFile = 'Re-Add file';
  lisPESortFiles = 'Sort Files Permanently';
  lisPEFixFilesCase = 'Fix Files Case';
  lisPEShowMissingFiles = 'Show Missing Files';
  lisPckEditRemoveDependency = 'Remove dependency';
  lisPckEditMoveDependencyUp = 'Move dependency up';
  lisPckEditMoveDependencyDown = 'Move dependency down';
  lisPckEditStoreFileNameAsDefaultForThisDependency = 'Store file name as '
    +'default for this dependency';
  lisPckEditStoreFileNameAsPreferredForThisDependency = 'Store file name as '
    +'preferred for this dependency';
  lisPckEditClearDefaultPreferredFilenameOfDependency = 'Clear default/'
    +'preferred filename of dependency';
  lisRemoveNonExistingFiles = 'Remove non existing files';
  lisPckEditReAddDependency = 'Re-Add dependency';
  lisPckEditRecompileClean = 'Recompile Clean';
  lisPckEditRecompileAllRequired = 'Recompile All Required';
  lisPckEditCreateMakefile = 'Create Makefile';
  lisPckEditCreateFpmakeFile = 'Create fpmake.pp';
  lisPckEditAddToProject = 'Add to Project';
  lisPckEditInstall = 'Install';
  lisPckEditUninstall = 'Uninstall';
  lisPckEditViewPackageSource = 'View Package Source';
  lisPckEditGeneralOptions = 'General Options';
  lisPckEditPackageHasChangedSavePackage = 'Package %s%s%s has changed.%sSave package?';
  lisPckEditPage = '%s, Page: %s';
  lisPckEditRemoveFile2 = 'Remove file?';
  lisPckEditRemoveFileFromPackage = 'Remove file %s%s%s%sfrom package %s%s%s?';
  lisPckEditRemoveDependency2 = 'Remove Dependency?';
  lisPckEditRemoveDependencyFromPackage = 'Remove dependency %s%s%s%sfrom '
    +'package %s%s%s?';
  lisPckEditInvalidMinimumVersion = 'Invalid minimum version';
  lisPckEditTheMinimumVersionIsNotAValidPackageVersion = 'The minimum '
    +'version %s%s%s is not a valid package version.%s(good example 1.2.3.4)';
  lisPckEditInvalidMaximumVersion = 'Invalid maximum version';
  lisPckEditTheMaximumVersionIsNotAValidPackageVersion = 'The maximum '
    +'version %s%s%s is not a valid package version.%s(good example 1.2.3.4)';
  lisPckEditCompileEverything = 'Compile everything?';
  lisPckEditReCompileThisAndAllRequiredPackages = 'Re-Compile this and all '
    +'required packages?';
  lisPckEditCompilerOptionsForPackage = 'Compiler Options for Package %s';
  lisPckEditSavePackage = 'Save Package';
  lisPckEditCompilePackage = 'Compile package';
  lisPckEditAddAnItem = 'Add an item';
  lisPckEditRemoveSelectedItem = 'Remove selected item';
  lisPckEditInstallPackageInTheIDE = 'Install package in the IDE';
  lisUseSub = 'Use >>';
  lisClickToSeeThePossibleUses = 'Click to see the possible uses';
  lisPckEditEditGeneralOptions = 'Edit General Options';
  lisPkgEdThereAreMoreFunctionsInThePopupmenu = 'There are more functions in the popupmenu';
  lisPckEditEditOptionsToCompilePackage = 'Edit Options to compile package';
  lisPckEditRequiredPackages = 'Required Packages';
  lisPckEditFileProperties = 'File Properties';
  lisPckEditRegisterUnit = 'Register unit';
  lisPckEditCallRegisterProcedureOfSelectedUnit = 'Call %sRegister%s '
    +'procedure of selected unit';
  lisPckEditRegisteredPlugins = 'Registered plugins';
  lisPkgMangAddUnitToUsesClauseOfPackageDisableThisOnlyForUnit = 'Add unit to '
    +'uses clause of package. Disable this only for units, that should not be '
    +'compiled in all cases.';
  lisPckDisableI18NOfLfm = 'Disable I18N of lfm';
  lisPckWhenTheFormIsSavedTheIDECanStoreAllTTranslateString = 'When the form is'
    +' saved, the IDE can store all TTranslateString properties to the package '
    +'po file. For this you must enable I18N for this package, provide a po '
    +'output directory and leave this option unchecked.';
  lisPkgMangUseUnit = 'Use unit';
  lisPckEditMinimumVersion = 'Minimum Version:';
  lisPckEditMaximumVersion = 'Maximum Version:';
  lisPckEditApplyChanges = 'Apply changes';
  lisPckEditPackage = 'Package %s';
  lisPckEditRemovedFiles = 'Removed Files';
  lisPckEditRemovedRequiredPackages = 'Removed required packages';
  lisPckEditDefault = '%s, default: %s';
  lisPckEditDependencyProperties = 'Dependency Properties';
  lisPckEditpackageNotSaved = 'package %s not saved';
  lisPckEditReadOnly = 'Read Only: %s';
  lisPckEditModified = 'Modified: %s';
  lisPkgEditNewUnitNotInUnitpath = 'New unit not in unitpath';
  lisPkgEditTheFileIsCurrentlyNotInTheUnitpathOfThePackage = 'The file %s%s%s%'
    +'sis currently not in the unit path of the package.%s%sAdd %s%s%s to '
    +'unit path?';
  lisPENewFileNotInIncludePath = 'New file not in include path';
  lisPETheFileIsCurrentlyNotInTheIncludePathOfThePackageA = 'The file "%s" is '
    +'currently not in the include path of the package.%sAdd "%s" to the '
    +'include path?';
  lisPkgEditRevertPackage = 'Revert package?';
  lisPkgEditDoYouReallyWantToForgetAllChangesToPackageAnd = 'Do you really '
    +'want to forget all changes to package %s and reload it from file?';
  lisNotAnInstallPackage = 'Not an install package';
  lisThePackageDoesNotHaveAnyRegisterProcedureWhichTypi = 'The package %s '
    +'does not have any "Register" procedure, which typically means, it does '
    +'not provide any IDE addon. Installing it will probably only increase '
    +'the size of the IDE and may even make it unstable.%s%sHint: If you want '
    +'to use a package in your project, use the "Add to project" menu item.';
  lisInstallItILikeTheFat = 'Install it, I like the fat';

  // package options dialog
  lisPckOptsUsage = 'Usage';
  lisPOChoosePoFileDirectory = 'Choose .po file directory';
  lisPckOptsIDEIntegration = 'IDE Integration';
  lisPckOptsProvides = 'Provides';
  lisPckOptsDescriptionAbstract = 'Description / Abstract';
  lisPckOptsAuthor = 'Author';
  lisPckOptsLicense = 'License';
  lisPckOptsMajor = 'Major';
  lisPckOptsMinor = 'Minor';
  lisPckOptsRelease = 'Release';
  lisBuildNumber = 'Build number';
  lisPckOptsAutomaticallyIncrementVersionOnBuild = 'Automatically increment version on build';
  lisPckOptsPackageType = 'Package type';
  lisPckOptsDesigntime = 'Designtime';
  lisPckOptsRuntime = 'Runtime';
  lisPckOptsDesigntimeAndRuntime = 'Designtime and runtime';
  lisRuntimeOnlyCanNotBeInstalledInIDE = 'Runtime only, can not be installed in IDE';
  lisPckOptsUpdateRebuild = 'Update / Rebuild';
  lisPckOptsAutomaticallyRebuildAsNeeded = 'Automatically rebuild as needed';
  lisPckOptsAutoRebuildWhenRebuildingAll = 'Auto rebuild when rebuilding all';
  lisPckOptsManualCompilationNeverAutomatically = 'Manual compilation (never automatically)';
  lisPckPackage = 'Package:';
  lisPckClearToUseThePackageName = 'Clear to use the package name';
  lisPckOptsAddPathsToDependentPackagesProjects = 'Add paths to dependent packages/projects';
  lisPckOptsInclude = 'Include';
  lisPckOptsObject = 'Object';
  lisPckOptsLibrary = 'Library';
  lisPckOptsAddOptionsToDependentPackagesAndProjects = 'Add options to dependent packages and projects';
  lisPckOptsLinker = 'Linker';
  lisPckOptsCustom = 'Custom';
  lisPckOptsInvalidPackageType = 'Invalid package type';
  lisPckOptsThePackageHasTheAutoInstallFlagThisMeans = 'The package %s%s%s '
    +'has the auto install flag.%sThis means it will be installed in the IDE. '
    +'Installation packages%smust be designtime Packages.';
  lisPckOptsPackageOptions = 'Package Options';

  // package explorer (package graph)
  lisMenuPackageGraph = 'Package Graph';
  lisPckExplUninstallPackage = 'Uninstall package %s';
  lisPckShowUnneededDependencies = 'Show unneeded dependencies';
  lisPckExplPackageNotFound = 'Package %s not found';
  lisPckExplState = '%sState: ';
  lisPckExplInstalled = 'Installed';
  lisLpkIsMissing = 'lpk is missing';
  lisPckExplInstallOnNextStart = 'Install on next start';
  lisPckExplUninstallOnNextStart = 'Uninstall on next start (unless needed by an installed package)';
  lisPckExplBase = 'Base, can not be uninstalled';

  // project inspector
  lisProjInspConfirmDeletingDependency = 'Confirm deleting dependency';
  lisProjInspConfirmRemovingFile = 'Confirm removing file';
  lisProjInspDeleteDependencyFor = 'Delete dependency for %s?';
  lisProjInspRemoveFileFromProject = 'Remove file %s from project?';
  lisProjInspRemovedRequiredPackages = 'Removed required packages';
  lisProjInspProjectInspector = 'Project Inspector - %s';
  
  // components list form
  lisCmpLstComponents = 'Components';
  lisCmpLstList = 'List';
  lisCmpLstPalette = 'Palette';
  lisCmpLstInheritance = 'Inheritance';

  // menu editor
  lisMenuEditor = 'Menu Editor ...';
  lisMenuEditorMenuEditor = 'Menu Editor';
  lisMenuEditorSelectMenu = 'Select Menu:';
  lisMenuEditorSelectTemplate = 'Select Template:';
  lisMenuEditorTemplatePreview = 'Template Preview';
  lisMenuEditorNewTemplateDescription = 'New Template Description ...';
  lisMenuEditorInsertNewItemAfter = 'Insert New Item (after)';
  lisMenuEditorInsertNewItemBefore = 'Insert New Item (before)';
  lisMenuEditorDeleteItem = 'Delete Item';
  lisMenuEditorCreateSubMenu = 'Create Submenu';
  lisMenuEditorHandleOnClickEvent = 'Handle OnClick Event';
  lisMenuEditorMoveUp = 'Move Up (or left)';
  lisMenuEditorMoveDown = 'Move Down (or right)';
  lisMenuEditorInsertFromTemplate = 'Insert From Template ...';
  lisMenuEditorSaveAsTemplate = 'Save As Template ...';
  lisMenuEditorDeleteFromTemplate = 'Delete From Template ...';

  // Standard File menu
  lisMenuTemplateDescriptionStandardFileMenu = 'Standard File Menu';
  lisKMNewUnit = 'New Unit';
  lisMenuTemplateOpenRecent = 'Open Recent';

  // Standard Edit menu
  lisMenuTemplateDescriptionStandardEditMenu = 'Standard Edit Menu';
  lisMenuTemplateFind = 'Find';
  lisMenuTemplateFindNext = 'Find Next';

  // Standard Help menu
  lisMenuTemplateDescriptionStandardHelpMenu = 'Standard Help Menu';
  lisMenuTemplateContents = 'Contents';
  lisMenuTemplateTutorial = 'Tutorial';
  lisMenuTemplateAbout = 'About';
  lisContributors = 'Contributors';
  lisAcknowledgements = 'Acknowledgements';
  lisAboutOfficial = 'Official:';
  lisAboutDocumentation = 'Documentation:';

  // character map
  lisCharacterMap = 'Character Map';
  
  // codetools defines value dialog
  lisCTDefChooseDirectory = 'Choose Directory';
  lisCTDefCodeToolsDirectoryValues = 'CodeTools Directory Values';
  lisCTDefVariable = 'Variable: %s';
  lisCTDefnoVariableSelected = '<no variable selected>';
  lisCTDefVariableName = 'Variable Name';

  // clean directory dialog
  lisClDirCleanSubDirectories = 'Clean sub directories';
  lisClDirRemoveFilesMatchingFilter = 'Remove files matching filter';
  lisClDirSimpleSyntaxEGInsteadOf = 'Simple Syntax (e.g. * instead of .*)';
  lisClDirKeepAllTextFiles = 'Keep all text files';
  lisClDirKeepFilesMatchingFilter = 'Keep files matching filter';
  lisClDirCleanDirectory = 'Clean Directory';
  lisClDirClean = 'Clean';
  
  // LFM repair wizard
  lisTheLFMLazarusFormFileContainsInvalidPropertiesThis = 'The LFM (Lazarus '
    +'form) file contains invalid properties. This means for example it '
    +'contains some properties/classes, which do not exist in the current '
    +'LCL. The normal fix is to remove these properties from the lfm and fix '
    +'the pascal code manually.';
  lisFixLFMFile = 'Fix LFM file';
  lisMissingEvents = 'Missing Events';
  lisTheFollowingMethodsUsedByAreNotInTheSourceRemoveTh = 'The following methods '
    +'used by %s are not in the source%s%s%s%s%s%sRemove the dangling references?';
  lisLFMFileContainsInvalidProperties = 'The LFM file contains unknown'
    +' properties/classes which do not exist in LCL. They can be replaced or removed.';

  // extract proc dialog
  lisNoCodeSelected = 'No code selected';
  lisPleaseSelectSomeCodeToExtractANewProcedureMethod = 'Please select some '
    +'code to extract a new procedure/method.';
  lisInvalidSelection = 'Invalid selection';
  lisThisStatementCanNotBeExtractedPleaseSelectSomeCode = 'This statement can '
    +'not be extracted.%sPlease select some code to extract a new procedure/method.';
  lisExtractProcedure = 'Extract Procedure';
  lisNameOfNewProcedure = 'Name of new procedure';
  lisExtract = 'Extract';
  lisInvalidProcName = 'Invalid proc name';
  lisPublicMethod = 'Public Method';
  lisPrivateMethod = 'Private Method';
  lisProtectedMethod = 'Protected Method';
  lisPublishedMethod = 'Published Method';
  lisProcedure = 'Procedure';
  lisProcedureWithInterface = 'Procedure with interface';
  lisSubProcedure = 'Sub Procedure';
  lisSubProcedureOnSameLevel = 'Sub Procedure on same level';
  lisFreePascalCompilerNotFound = 'Free Pascal Compiler not found';
  lisTheFreePascalCompilerFilenameWasNotFoundItIsRecomm = 'The Free Pascal compiler '
    +'(filename: %s) was not found.%sIt is recommended that you install fpc.';
  lisInvalidCompilerFilename = 'Invalid Compiler Filename';
  lisTheCurrentCompilerFilenameIsNotAValidExecutablePlease = 'The current '
    +'compiler filename %s%s%s%sis not a valid executable.%sPlease check '
    +'Tools -> Options -> Files';
  lisFreePascalSourcesNotFound = 'Free Pascal Sources not found';
  lisTheFreePascalSourceDirectoryWasNotFoundSomeCodeFun = 'The Free Pascal '
    +'source directory was not found.%sSome code functions will not work.%sIt '
    +'is recommended that you install it and set the path%sTools -> Options -> Files';
  lisInvalidFreePascalSourceDirectory = 'Invalid Free Pascal source directory';
  lisTheCurrentFreePascalSourceDirectoryDoesNotLookCorr2 = 'The current Free '
    +'Pascal source directory %s%s%s%sdoes not look correct.%sCheck '
    +'Tools -> Options -> Files';
  lisLazarusDirectoryNotFound = 'Lazarus directory not found';
  lisTheCurrentLazarusDirectoryDoesNotLookCorrectWithou2 = 'The current '
    +'Lazarus directory %s%s%s%sdoes not look correct.%sWithout it You will '
    +'not be able to create LCL applications.%sCheck Tools -> Options -> Files';
  lisTheCurrentLazarusDirectoryDoesNotLookCorrectWithou = 'The current '
    +'Lazarus directory %s%s%s%sdoes not look correct.%sWithout it You will '
    +'not be able to create LCL applications.%sChoose Ok to choose the '
    +'default %s%s%s.%sOtherwise check Tools -> Options -> Files';
  lisTheLazarusDirectoryWasNotFoundYouWillNotBeAbleToCr = 'The Lazarus '
    +'directory was not found.%sYou will not be able to create LCL '
    +'applications.%sPlease check Tools -> Options -> Files';
  lisTheCurrentFreePascalSourceDirectoryDoesNotLookCorr = 'The current Free '
    +'Pascal source directory %s%s%s%sdoes not look correct.%sChoose Ok to '
    +'choose the default %s%s%s.%sOtherwise check Tools -> Options -> Files';
  lisTheCurrentCompilerFilenameIsNotAValidExecutableCho = 'The current '
    +'compiler filename %s%s%s%sis not a valid executable.%sChoose Ok to '
    +'choose the default %s%s%s.%sOtherwise check Tools -> Options -> Files';
    
  // Help Options
  lisHlpOptsHelpOptions = 'Help Options';
  lisHlpOptsViewers = 'Viewers';
  lisHOFPCDocHTMLPath = 'FPC Doc HTML Path';
  lisHlpOptsProperties = 'Properties:';
  lisHlpOptsDatabases = 'Databases';

  // enclose selection dialog
  lisEnclose = 'Enclose';
  lisChooseStructureToEncloseSelection = 'Choose structure to enclose selection';
    
  lisErrors = 'Errors';
  lisLFMFile = 'LFM file';
  lisRemoveAllInvalidProperties = 'Remove all invalid properties';
  lisCompTest = '&Test';

  lisA2PSwitchPaths = 'Switch Paths';
  lisA2PAddFilesToPackage = 'Add Files to Package';
  lisA2PAddToPackage = 'Add to package';
  lisA2PCreateNewFile = 'Create New File';
  lisA2PCreateNewComp = 'Create New Component';
  lisA2PCreateNewReq = 'Create New Requirement';
  lisA2PFilename2 = 'Filename';
  lisFRIFindOrRenameIdentifier = 'Find or Rename Identifier';
  lisHelpSelectorDialog = 'Help selector';
  lisSelectAHelpItem = 'Select a help item:';
  lisErrorMovingComponent = 'Error moving component';
  lisErrorNamingComponent = 'Error naming component';
  lisErrorSettingTheNameOfAComponentTo = 'Error setting the name of a component %s to %s';
  lisErrorMovingComponent2 = 'Error moving component %s:%s';
  lisInstallUninstallPackages = 'Install/Uninstall Packages';
  lisMenuEditInstallPkgs = 'Install/Uninstall Packages ...';
  lisAvailablePackages = 'Available packages';
  lisExportList = 'Export list';
  lisDoNotInstall = 'Do not install';
  lisImportList = 'Import list';
  lisUninstallSelection = 'Uninstall selection';
  lisPackagesToInstallInTheIDE = 'Packages to install in the IDE';
  lisInstallSelection = 'Install selection';
  lisPackageInfo = 'Package info';
  lisSaveAndRebuildIDE = 'Save and rebuild IDE';
  lisSaveAndExitDialog = 'Save and exit dialog';
  lisAlignment = 'Alignment';
  lisHorizontal = 'Horizontal';
  lisNoChange = 'No change';
  lisTops = 'Tops';
  lisLeftSides = 'Left sides';
  lisCenters = 'Centers';
  lisBottoms = 'Bottoms';
  lisRightSides = 'Right sides';
  lisCenterInWindow = 'Center in window';
  lisSpaceEqually = 'Space equally';
  lisTopSpaceEqually = 'Top space equally';
  lisBottomSpaceEqually = 'Bottom space equally';
  lisLeftSpaceEqually = 'Left space equally';
  lisRightSpaceEqually = 'Right space equally';
  lisVertical = 'Vertical';
  lisScalingFactor = 'Scaling factor:';
  lisTabOrderUpHint = 'Move the selected control up in tab order';
  lisTabOrderDownHint = 'Move the selected control down in tab order';
  lisTabOrderSortHint = 'Calculate tab order for controls by their X- and Y- positions';
  lisTabOrderConfirmSort = 'Sort tab orders of all child controls of "%s" by their positions?';

  lisCustomProgram = 'Custom Program';
  lisSimpleProgram = 'Simple Program';
  lisProgram = 'Program';
  lisConsoleApplication = 'Console application';

  lisApplicationProgramDescriptor = 'A graphical Free Pascal application using'
    +' the cross-platform LCL library for its GUI.';
  lisSimpleProgramProgramDescriptor = 'A most simple Free Pascal command line program.';
  lisProgramProgramDescriptor = 'A Free Pascal command line program with some useful settings added.';
  lisConsoleApplicationProgramDescriptor = 'A Free Pascal command line program using'
    +' TCustomApplication to easily check command line options, handling exceptions, etc.';
  lisCustomProgramProgramDescriptor = 'A Custom Free Pascal program.';
  lisLibraryProgramDescriptor = 'A Free Pascal shared library (.dll under Windows,'
    +' .so under Linux, .dylib under MacOS X).';

  lisNPSelectAProjectType = 'Select a project type';
  lisNPCreateANewProject = 'Create a new project';
  lisNPCreate = 'Create';
  lisOIFChooseABaseClassForTheFavoriteProperty = 'Choose a base class for '
    +'the favorite property %s%s%s.';
  lisOIFAddToFavoriteProperties = 'Add to favorite properties';
  lisOIFRemoveFromFavoriteProperties = 'Remove from favorite properties';
  lisReplacingSelectionFailed = 'Replacing selection failed.';
  lisUnableToFindInLFMStream = 'Unable to find %s in LFM Stream.';
  lisErrorParsingLfmComponentStream = 'Error parsing lfm component stream.';
  lisUnableToCreateTemporaryLfmBuffer = 'Unable to create temporary lfm buffer.';
  lisUnableToGetSourceForDesigner = 'Unable to get source for designer.';
  lisUnableToGatherEditorChanges = 'Unable to gather editor changes.';
  lisUnableToStreamSelectedComponents2 = 'Unable to stream selected components.';
  lisUnableToChangeClassOfTo = '%s%sUnable to change class of %s to %s';
  lisCanOnlyChangeTheClassOfTComponents = 'Can only change the class of TComponents.';
  lisOldClass = 'Old Class';
  lisNewClass = 'New Class';
  lisOldAncestors = 'Old Ancestors';
  lisNewAncestors = 'New Ancestors';
  lisCEModeShowCategories = 'Show Categories';
  lisCEModeShowSourceNodes = 'Show Source Nodes';
  lisCESurrounding = 'Surrounding';
  lisCEIn = '%s in %s';
  lisCEOUpdate = 'Update';
  lisCEORefreshAutomatically = 'Refresh automatically';
  lisCEONeverOnlyManually = 'Never, only manually';
  lisCEOWhenSwitchingFile = 'When switching file in source editor';
  lisCEOOnIdle = 'On idle';
  lisCEFollowCursor = 'Follow cursor';
  lisWhenTheSourceEditorCursorMovesShowTheCurrentNodeIn = 'When the source '
    +'editor cursor moves, show the current node in the code explorer';
  lisCECategories = 'Categories';
  lisCEUses = 'Uses';
  lisCEOnlyUsedInCategoryMode = 'Only used in category mode';
  lisCETypes = 'Types';
  lisCEVariables = 'Variables';
  lisCEConstants = 'Constants';
  lisCEProcedures = 'Procedures';
  lisCEProperties = 'Properties';
  lisCodeObserver = 'Code Observer';
  lisCEOMode = 'Preferred exhibition mode';
  lisCEOModeCategory = 'Category';
  lisCEOModeSource = 'Source';

  lisFPDocEditor = 'FPDoc Editor';
  lisCodeHelpMainFormCaption = 'FPDoc Editor';
  lisCodeHelpNoTagCaption = '<NONE>';
  lisCodeHelpnoinheriteddescriptionfound = '(no inherited description found)';
  lisCodeHelpShortdescriptionOf = 'Short description of';
  lisCodeHelpNoDocumentation = '(none)';
  lisCodeHelpInherited = 'Inherited';
  lisCodeHelpShortTag = 'Short';
  lisCodeHelpDescrTag = 'Description';
  lisCodeHelpErrorsTag = 'Errors';
  lisCodeHelpSeeAlsoTag = 'See also';
  lisCodeHelpAddPathButton = 'Add path';
  lisSearchPaths2 = 'Search paths';
  lisFPDocPackageName = 'FPDoc package name:';
  lisFPDocPackageNameDefaultIsProjectFileName = 'FPDoc package name. Default '
    +'is project file name.';
  lisCodeHelpDeletePathButton = 'Remove path';
  lisDefaultPlaceholder = '(default)';
  lisEONOTEOnlyAbsolutePathsAreSupportedNow = 'NOTE: only absolute paths are supported now';
  lisCodeHelpConfirmreplace = 'Confirm replace';
  lisCodeHelpGroupBox = 'FPDoc settings';
  lisCodeHelpHintBoldFormat = 'Insert bold formatting tag';
  lisCodeHelpHintItalicFormat = 'Insert italic formatting tag';
  lisCodeHelpHintUnderlineFormat = 'Insert underline formatting tag';
  lisCodeHelpHintInsertCodeTag = 'Insert code formatting tag';
  lisCodeHelpHintRemarkTag = 'Insert remark formatting tag';
  lisCodeHelpHintVarTag = 'Insert var formatting tag';
  lisCodeHelpAddLinkButton = 'Add link';
  lisCodeHelpDeleteLinkButton = 'Delete link';
  lisCodeHelpCreateButton = 'Create help item';
  lisOpenXML = 'Open XML';
  lisCodeHelpInsertALink = 'Insert a link ...';
  lisCodeHelpInsertParagraphFormattingTag = 'Insert paragraph formatting tag';
  lisCodeHelpExampleTag = 'Example';
  lisCodeHelpBrowseExampleButton = 'Browse';
  lisLDMoveEntriesToInherited = 'Move entries to inherited';
  lisLDCopyFromInherited = 'Copy from inherited';
  lisLDAddLinkToInherited = 'Add link to inherited';
  lisEnableMacros = 'Enable Macros';
  lisCTSelectCodeMacro = 'Select Code Macro';
  lisPDProgress = 'Progress';
  lisPDAbort = 'Abort';
  lisPOSaveInLpiFil = 'Save in .lpi file';
  lisPOSaveInLpsFileInProjectDirectory = 'Save in .lps file in project directory';
  lisPOSaveInIDEConfigDirectory = 'Save in IDE config directory';
  lisPODoNotSaveAnySessionInfo = 'Do not save any session info';
  lisPOSaveSessionInformationIn = 'Save session information in';
  lisPOSaveSessionJumpHistory = 'Save jump history';
  lisPOSaveSessionFoldState = 'Save fold info';
  lisMVSaveMessagesToFileTxt = 'Save messages to file (*.txt)';
  lisTabOrderOf = 'Tab Order of %s';

  lisAnchorEnabledHint = 'Enabled = Include %s in Anchors';
  lisAroundBorderSpaceHint = 'Borderspace around the control. The other four borderspaces are added to this value.';
  lisTopBorderSpaceSpinEditHint = 'Top borderspace. This value is added to base borderspace and used for the space above the control.';
  lisBottomBorderSpaceSpinEditHint = 'Bottom borderspace. This value is added to base borderspace and used for the space below the control.';
  lisLeftBorderSpaceSpinEditHint = 'Left borderspace. This value is added to base borderspace and used for the space left to the control.';
  lisRightBorderSpaceSpinEditHint = 'Right borderspace. This value is added to base borderspace and used for the space right to the control.';
  lisCenterControlVerticallyRelativeToSibling = 'Center control vertically relative to the given sibling. BorderSpacing is ignored.';
  lisCenterControlHorizontallyRelativeToSibling = 'Center control horizontally relative to the given sibling. BorderSpacing is ignored.';
  lisAnchorBottomToTopSide = 'Anchor bottom side to top side of sibling. The kept distance is defined by both BorderSpacing properties of this and sibling.';
  lisAnchorBottomToBottomSide = 'Anchor bottom side to bottom side of sibling. Use BorderSpacing to set a distance. BorderSpacing of sibling is ignored.';
  lisAnchorTopToTopSide = 'Anchor top side to top side of sibling. Use BorderSpacing to set a distance. BorderSpacing of sibling is ignored.';
  lisAnchorTopToBottomSide = 'Anchor top side to bottom side of sibling. The kept distance is defined by both BorderSpacing properties of this and sibling.';
  lisAnchorLeftToLeftSide = 'Anchor left side to left side of sibling. Use BorderSpacing to set a distance. BorderSpacing of sibling is ignored.';
  lisAnchorLeftToRightSide = 'Anchor left side to right side of sibling. The kept distance is defined by both BorderSpacing properties of this and sibling.';
  lisAnchorRightToLeftSide = 'Anchor right side to left side of sibling. The kept distance is defined by both BorderSpacing properties of this and sibling.';
  lisAnchorRightToRightSide = 'Anchor right side to right side of sibling. Use BorderSpacing to set a distance. BorderSpacing of sibling is ignored.';
  lisTopSiblingComboBoxHint = 'This is the sibling control to which the top side is anchored. Leave empty for parent.';
  lisBottomSiblingComboBoxHint = 'This is the sibling control to which the bottom side is anchored. Leave empty for parent.';
  lisRightSiblingComboBoxHint = 'This is the sibling control to which the right side is anchored. Leave empty for parent.';
  lisLeftSiblingComboBoxHint = 'This is the sibling control to which the left side is anchored. Leave empty for parent.';
  lisBorderSpace = 'Border space';
  lisSibling = 'Sibling';
  lisRightAnchoring = 'Right anchoring';
  lisTopAnchoring = 'Top anchoring';
  lisLeftGroupBoxCaption = 'Left anchoring';
  lisBottomGroupBoxCaption = 'Bottom anchoring';
  lisUnableToSetAnchorSideControl = 'Unable to set AnchorSide Control';
  lisThisWillCreateACircularDependency = 'This will create a circular dependency.';
  lisAnchorEditorNoControlSelected = 'Anchor Editor - no control selected';
  lisAnchorsOfSelectedControls = 'Anchors of selected controls';
  lisDebugOptionsFrmAdditionalSearchPath = 'Additional search path';
  lisDebugOptionsFrmDebuggerGeneralOptions = 'Debugger general options';
  lisDebugOptionsFrmShowMessageOnStop = 'Show message on stop';
  lisDebugOptionsFrmResetDebuggerOnEachRun = 'Reset Debugger after each run';
  lisDebugOptionsFrmDebuggerSpecific = 'Debugger specific options (depends on '
    +'type of debugger)';
  lisDebugOptionsFrmEventLog = 'Event Log';
  lisDebugOptionsFrmClearLogOnRun = 'Clear log on run';
  lisDebugOptionsFrmLimitLinecountTo = 'Limit line count to';
  lisDebugOptionsFrmUseEventLogColors = 'Use event log colors';
  lisDebugOptionsFrmBreakpoint = 'Breakpoint';
  lisDebugOptionsFrmProcess = 'Process';
  lisDebugOptionsFrmThread = 'Thread';
  lisDebugOptionsFrmModule = 'Module';
  lisDebugOptionsFrmOutput = 'Output';
  lisDebugOptionsFrmWindows = 'Windows';
  lisDebugOptionsFrmDebugger = 'Debugger';
  lisDebugOptionsFrmLanguageExceptions = 'Language Exceptions';
  lisDebugOptionsFrmIgnoreTheseExceptions = 'Ignore these exceptions';
  lisDebugOptionsFrmNotifyOnLazarusExceptions = 'Notify on Lazarus Exceptions';
  lisDebugOptionsFrmOSExceptions = 'OS Exceptions';
  lisDebugOptionsFrmSignals = 'Signals';
  lisMacroName = 'Macro name';
  lisIDEMacroValuesForFPCMacrosUseCustomOptions = 'IDE macro values (for FPC '
    +'macros use custom options)';
  lisMacroValue = 'Macro value';
  lisDebugOptionsFrmHandledBy = 'Handled by';
  lisDebugOptionsFrmResume = 'Resume';
  lisDebugOptionsFrmHandledByProgram = 'Handled by Program';
  lisDebugOptionsFrmHandledByDebugger = 'Handled by Debugger';
  lisDebugOptionsFrmResumeHandled = 'Resume Handled';
  lisDebugOptionsFrmResumeUnhandled = 'Resume Unhandled';
  lisDebugOptionsFrmAddException = 'Add Exception';
  lisDebugOptionsFrmEnterExceptionName = 'Enter the name of the exception';
  lisDebugOptionsFrmDuplicateExceptionName = 'Duplicate Exception name';
  dlgDebugOptionsPathEditorDlgCaption = 'Path Editor';
  lisHFMHelpForFreePascalCompilerMessage = 'Help for Free Pascal Compiler message';
  lisRelativePaths = 'Relative paths';
  lisInheritedParameters = 'Inherited parameters';
  lisShowRelativePaths = 'Show relative paths';
  lisCommandLineParameters = 'Command line parameters';
  rsFormDataFileDfm = 'Form data file (*.dfm)|*.dfm';
  liswlWatchList = 'Watch List';
  liswlExpression = 'Expression';
  lisKMChooseKeymappingScheme = 'Choose Keymapping scheme';
  lisKMNoteAllKeysWillBeSetToTheValuesOfTheChosenScheme = 'Note: All keys '
    +'will be set to the values of the chosen scheme.';
  lisKMKeymappingScheme = 'Keymapping Scheme';
  lisPVUEditVirtualUnit = 'Edit virtual unit';
  lisPathEditorReplaceHint = 'Replace the selected path with a new path';
  lisPathEditorAddHint = 'Add new path to the list';
  lisPathEditorDeleteHint = 'Delete the selected path';
  lisPathEditorDeleteInvalidHint = 'Remove non-existent (gray) paths from the list';
  lisPathEditorTemplAddHint = 'Add template to the list';

  // version info tab
  VersionInfoTitle = 'Version Info';
  
  // Procedure List dialog
  lisPListProcedureList         = 'Procedure List';
  lisPListObjects               = '&Objects';
  lisPListJumpToSelection       = 'Jump To Selection';
  lisPListFilterAny             = 'Filter by matching any part of method';
  lisPListFilterStart           = 'Filter by matching with start of method';
  lisPListChangeFont            = 'Change Font';
  lisPListCopyMethodToClipboard = 'Copy method name to the clipboard';
  lisPListType                  = 'Type';
  lisPListAll                   = '<All>';
  lisPListNone                  = '<None>';

  //conditional defines dialog
  rsCreateNewDefine = 'Create new define';
  rsConditionalDefines = 'Conditional defines';
  rsAddInverse = 'Add Inverse';
  lisAutomaticallyOnLineBreak = 'line break';
  lisAutomaticallyOnSpace = 'space';
  lisAutomaticallyOnTab = 'tab';
  lisAutomaticallyOnWordEnd = 'word end';
  lisAutomaticallyIgnoreForSelection = 'do not complete selection';
  lisAutomaticallyRemoveCharacter = 'do not add character';
  lisKeepSubIndentation = 'Keep indentation';
  lisPckOptsThisPackageProvidesTheSameAsTheFollowingPackages = 'This package '
    +'provides the same as the following packages:';
  lisPLDPackageLinks = 'Package Links';
  lisSAMOverrideFirstSelected = 'Override first selected';
  lisSAMOverrideAllSelected = 'Override all selected';
  lisCCDNoClass = 'no class';
  lisCCDChangeClassOf = 'Change Class of %s';

  // View Search Results dialog
  lisVSRForwardSearch = 'Forward Search';
  lisVSRResetResultList = 'Reset Result List';
  rsFoundButNotListedHere = 'Found, but not listed here: ';
  rsStartANewSearch = 'Start a new search';
  rsCloseCurrentPage = 'Close current page';
  rsFilterTheListWithString = 'Filter the lines in list with a string';
  //rsEnterOneOrMorePhrasesThatYouWantToFilter = 'Enter one or more phrases '
  //  +'that you want to Filter in the list, separated by space, or comma';

  // Application Bundle
  lisABCreationFailed = 'Error occured during Application Bundle creation: ';
  lisUnableToWrite2 = 'Unable to write %s%s%s';
  lisErrorLoadingFrom = 'Error loading %s from%s%s%s%s';
  lisErrorSavingTo = 'Error saving %s to%s%s%s%s';
  lisXMLError = 'XML Error';
  lisXMLParserErrorInFileError = 'XML parser error in file %s%sError: %s';
  lisUnableToWriteXmlStreamToError = 'Unable to write xml stream to %s%sError: %s';
  lisFileIsSymlink = 'File is symlink';
  lisTheFileIsASymlinkOpenInstead = 'The file %s%s%s is a symlink.%s%sOpen %s%'
    +'s%s instead?';
  lisOpenTarget = 'Open target';
  lisOpenSymlink = 'Open symlink';
  lisFileLinkError = 'File link error';
  lisWriteErrorFile = 'Write error: %s%sFile: %s%s%s';
  lisStreamError = 'Stream Error';
  lisTheCodetoolsFoundAnError = 'The codetools found an error:%s%s%s';
  lisIgnoreAndContinue = 'Ignore and continue';
  lisNotImplemented = 'Not implemented';
  lisNotImplementedYet = 'Not implemented yet:%s%s';
  lisMovePage = 'Move Page';
  lisFileSettings = 'File Settings';

  // Debugger Dialogs
  lisDbgWinPower = 'On/Off';
  lisDbgWinPowerHint = 'Disable/Enable updates for the entire window';

  lisDbgItemEnable          = 'Enable';
  lisDbgItemEnableHint      = 'Enable';
  lisDbgItemDisable         = 'Disable';
  lisDbgItemDisableHint     = 'Disable';
  lisDbgItemDelete          = 'Delete';
  lisDbgItemDeleteHint      = 'Delete';
  lisDbgAllItemEnable       = 'Enable all';
  lisDbgAllItemEnableHint   = 'Enable all';
  lisDbgAllItemDisable      = 'Disable all';
  lisDbgAllItemDisableHint  = 'Disable all';
  lisDbgAllItemDelete       = 'Delete all';
  lisDbgAllItemDeleteHint   = 'Delete all';
  lisDbgBreakpointPropertiesHint = 'Breakpoint Properties ...';

  // Call Stack Dialog
  lisCurrent = 'Current';
  lisViewSource = 'View Source';
  lisViewSourceDisass = 'View Assembler';
  lisMaxS = 'Max %d';
  lisGotoSelectedSourceLine = 'Goto selected source line';
  lisCopyAll = 'Copy All';
  lisIndex = 'Index';
  lisFunction = 'Function';
  lisCSTop = 'Top';
  lisCSBottom = 'Bottom';

  // Break Points Dialog
  lisFilenameAddress = 'Filename/Address';
  lisLineLength = 'Line/Length';
  lisCondition = 'Condition';
  lisPassCount = 'Pass Count';
  lisGroup = 'Group';
  lisSourceBreakpoint = '&Source Breakpoint ...';
  lisAddressBreakpoint = '&Address Breakpoint ...';
  lisWatchPoint = '&Data/Watch Breakpoint ...';
  lisWatchPointBreakpoint = '&Data/watch Breakpoint ...';
  lisEnableAll = '&Enable All';
  lisDeleteAll = '&Delete All';
  lisDisableAllInSameSource = 'Disable All in same source';
  lisEnableAllInSameSource = 'Enable All in same source';
  lisDeleteAllInSameSource = 'Delete All in same source';
  lisDeleteAllSelectedBreakpoints = 'Delete all selected breakpoints?';
  lisDeleteBreakpointAtLine = 'Delete breakpoint at%s"%s" line %d?';
  lisDeleteBreakpointForAddress = 'Delete breakpoint for address %s?';
  lisDeleteBreakpointForWatch = 'Delete watchpoint for "%s"?';
  lisDeleteAllBreakpoints = 'Delete all breakpoints?';
  lisDeleteAllBreakpoints2 = 'Delete all breakpoints in file %s%s%s?';
  lisGroupNameInput = 'Group name:';
  lisGroupNameInvalid = 'BreakpointGroup name must be a valid Pascal identifier name.';
  lisGroupNameEmptyClearInstead = 'The group name cannot be empty. Clear breakpoints'' group(s)?';
  lisGroupAssignExisting = 'Assign to existing "%s" group?';
  lisGroupSetNew = 'Set new group ...';
  lisGroupSetNone = 'Clear group(s)';
  lisGroupEmptyDelete = 'No more breakpoints are assigned to group "%s", delete it?';
  lisGroupEmptyDeleteMore = '%sThere are %d more empty groups, delete all?';
  lisEnableGroups = 'Enable Groups';
  lisDisableGroups = 'Disable Groups';
  lisLogMessage = 'Log Message';
  lisLogEvalExpression = 'Eval expression';
  lisLogCallStack = 'Log Call Stack';
  lisLogCallStackLimit = '(frames limit. 0 - no limits)';
  lisAutoContinue = 'Auto Continue';
  lisDisabled = 'Disabled';
  lisInvalidOff = 'Invalid (Off)';
  lisInvalidOn = 'Invalid (On)';
  lisOff = '? (Off)';
  lisOn = '? (On)';
  lisTakeSnapshot = 'Take a Snapshot';

  // Evaluate/Modify Dialog
  lisEvaluate = 'E&valuate';
  lisModify = '&Modify';
  lisWatch = '&Watch';
  lisInspect = '&Inspect';
  lisDBGEMExpression = '&Expression:';
  lisDBGEMResult = '&Result:';
  lisDBGEMNewValue = '&New value:';

  // Breakpoint Properties Dialog
  lisBreakPointProperties = 'Breakpoint Properties';
  lisLine = 'Line:';
  lisAddress = 'Address:';
  lisWatchData = 'Watch:';
  lisWatchScope = 'Watch scope';
  lisWatchScopeGlobal = 'Global';
  lisWatchScopeLocal = 'Declaration';
  lisWatchKind = 'Watch action';
  lisWatchKindRead = 'Read';
  lisWatchKindWrite = 'Write';
  lisWatchKindReadWrite = 'Read/Write';
  lisAutoContinueAfter = 'Auto continue after:';
  lisMS = '(ms)';
  lisActions = 'Actions:';
  lisEvalExpression = 'Eval expression';

  // Debug Output Dialog
  lisCopyAllOutputClipboard = 'Copy all output to clipboard';

  // Designer Size Components Dialog
  lisShrinkToSmal = 'Shrink to smallest';
  lisGrowToLarges = 'Grow to Largest';

  // Watch Dialog
  lisWatchToWatchPoint = 'Create &Data/Watch Breakpoint ...';

  // Watch Property Dialog
  lisWatchPropert = 'Watch Properties';
  lisExpression = 'Expression:';
  lisRepeatCount = 'Repeat Count:';
  lisDigits = 'Digits:';
  lisAllowFunctio = 'Allow Function Calls';
  lisStyle = 'Style';
  lisCharacter = 'Character';
  lisString = 'String';
  lisDecimal = 'Decimal';
  lisUnsigned = 'Unsigned';
  lisHexadecimal = 'Hexadecimal';
  lisFloatingPoin = 'Floating Point';
  lisPointer = 'Pointer';
  lisRecordStruct = 'Record/Structure';
  lisMemoryDump = 'Memory Dump';

  // Callstack
  lisCallStackNotEvaluated = 'Stack not evaluated';

  // Locals Dialog
  lisLocals = 'Locals';
  lisLocalsNotEvaluated = 'Locals not evaluated';
  lisEvaluateModify = '&Evaluate/Modify';
  lisLocalsDlgCopyName = '&Copy Name';
  lisLocalsDlgCopyValue = 'C&opy Value';

  // Registers Dialog
  lisRegisters = 'Registers';

  // ThreadDlg
  lisThreads = 'Threads';
  lisThreadsState = 'State';
  lisThreadsSrc  = 'Source';
  lisThreadsLine = 'Line';
  lisThreadsFunc = 'Function';
  lisThreadsCurrent = 'Current';
  lisThreadsGoto = 'Goto';
  lisThreadsNotEvaluated = 'Threads not evaluated';

  // HistoryDlg
  histdlgFormName   = 'History';
  histdlgColumnCur  = '';
  histdlgColumnTime = 'Time';
  histdlgColumnLoc  = 'Location';
  histdlgBtnPowerHint = 'Switch on/off automatic snapshots';
  histdlgBtnEnableHint = 'Toggle view snapshot or current';
  histdlgBtnClearHint = 'Clear all snapshots';
  histdlgBtnShowHistHint = 'View history';
  histdlgBtnShowSnapHint = 'View Snapshots';
  histdlgBtnMakeSnapHint = 'Take Snapshot';
  histdlgBtnRemoveHint   = 'Remove selected entry';

  // Exception Dialog
  lisExceptionDialog = 'Debugger Exception Notification';
  lisIgnoreExceptionType = 'Ignore this exception type';

  lisetEditCustomScanners = 'Edit custom scanners (%s)';
  
  // ProjectWizard Dialog
  lisProjectWizard = 'Project Wizard';
  lisPWNewProject = '&New Project';
  lisPWOpenProject = '&Open Project';
  lisPWOpenRecentProject = 'Open &Recent Project';
  lisPWViewExampleProjects = 'View &Example Projects';
  lisPWConvertProject = 'Convert &Delphi Project';
  lisQuitLazarus = '&Quit Lazarus';
  lisIsAThisCircularDependencyIsNotAllowed = '%s is a %s.%sThis circular '
    +'dependency is not allowed.';
  lisTheComponentCanNotBeDeletedBecauseItIsNotOwnedBy = 'The component %s can '
    +'not be deleted, because it is not owned by %s.';
  lisFilter3 = 'Filter: %s';
  lisInvalidPublishingDirectory = 'Invalid publishing Directory';
  lisSourceDirectoryAndDestinationDirectoryAreTheSameMa = 'Source directory %'
    +'s%s%s%sand destination directory %s%s%s%sare the same.%s%sMaybe you '
    +'misunderstand this feature.%sIt will clean/recreate the destination '
    +'directory%sand copies the package/project into it.';
  lisClearDirectory = 'Clear Directory?';
  lisInOrderToCreateACleanCopyOfTheProjectPackageAllFil = 'In order to create '
    +'a clean copy of the project/package, all files in the following '
    +'directory will be deleted and all its content will be lost.%s%sDelete '
    +'all files in %s%s%s?';
  lisFileExtensionOfPrograms = 'File extension of programs';
  lisEveryNThLineNumber = 'Every n-th line number';
  lisShowOverviewGutter = 'Show overview Gutter';
  lisTopInfoView = 'Show Class/Proc Hint';
  lisLink = 'Link:';
  lisShort = 'Short:';
  lisInsertUrlTag = 'Insert url tag';
  lisInsertPrintshortTag2 = 'Insert printshort tag';
  lisDeleteOldFile2 = 'Delete old file?';
  lisTheUnitSearchPathOfContainsTheSourceDirectoryOfPac = 'The unit search '
    +'path of %s%s%s contains the source directory %s%s%s of package %s';
  lisFPCVersionEG222 = 'FPC Version (e.g. 2.2.2)';
  lisMissingIdentifiers = 'Missing identifiers';
  lisChooseAFPDocLink = 'Choose a FPDoc link';
  lisLinkTarget = 'Link target';
  lisExamplesIdentifierTMyEnumEnumUnitnameIdentifierPac = 'Examples:%sIdentifier%s'
    +'TMyEnum.Enum%sUnitname.Identifier%s#PackageName.UnitName.Identifier';
  lisTitleLeaveEmptyForDefault = 'Title (leave empty for default)';
  lisPackageUnit = 'package unit';
  lisPackage2 = 'package %s';
  lisIdentifier = 'identifier';
  lisProjectUnit = 'project unit';
  lisSyntaxMode = 'Syntax mode';
  lisUseAnsistrings = 'Use Ansistrings';
  lisDoNotShowThisDialogForThisProject = 'Do not show this dialog for this project';
  lisObjectPascalDefault = 'Object Pascal - default';
  lisDelphi = 'Delphi';
  lisTurboPascal = 'Turbo Pascal';
  lisMacPascal = 'Mac Pascal';
  lisFreePascal = 'Free Pascal';
  lisSmallerRatherThanFaster = 'smaller rather than faster';
  lisVerifyMethodCalls = 'Verify method calls';
  lisToggleShowingFilenamesWithFullPathOrWithRelativePa = 'Toggle showing '
    +'filenames with full path or with relative path';
  lisDeleteSelectedFiles = 'Delete selected files';
  lisAddFilesInDirectory = 'Add Files in Directory';
  lisUnableToCreateLinkWithTarget = 'Unable to create link %s%s%s with target %s%s%s';
  lisBuildAllFilesOfProjectPackageIDE =
    'build all files of project/package/IDE';
  lisApplyBuildFlagsBToDependenciesToo = 'apply build flags (-B) to dependencies too';
  lisDoNotCompileDependencies = 'do not compile dependencies';
  lisAddPackageSToListOfInstalledPackagesCombineWithBui = 'add package(s) to '
    +'list of installed packages (combine with --build-ide to rebuild IDE).';
  lisBuildIDEWithPackages = 'build IDE with packages';
  lisShowVersionAndExit = 'show version and exit';
  lisOverrideTheProjectOperatingSystemEGWin32LinuxDefau = '%soverride the '
    +'project operating system. e.g. win32 linux. default: %s';
  lisOverrideTheProjectWidgetsetEGGtkGtk2QtWin32CarbonD = '%soverride the '
    +'project widgetset. e.g. gtk gtk2 qt win32 carbon. default: %s';
  lisOverrideTheProjectCpuEGI386X86_64PowerpcPowerpc_64 = '%soverride the '
    +'project cpu. e.g. i386 x86_64 powerpc powerpc_64 etc. default: %s';
  lisOverrideTheDefaultCompilerEGPpc386Ppcx64PpcppcEtcD = '%soverride the '
    +'default compiler. e.g. ppc386 ppcx64 ppcppc etc. default is stored in '
    +'environmentoptions.xml';
  lisOverrideTheProjectBuildMode = '%soverride the project or IDE build mode.';
  lisProjectChangedOnDisk = 'Project changed on disk';
  lisTheProjectInformationFileHasChangedOnDisk = 'The project information '
    +'file %s%s%s%shas changed on disk.';
  lisReopenProject = 'Reopen project';
  rsScanners = 'Scanners';
  rsAvailableScanners = 'Available scanners';
  rsSelectAnInheritedEntry = 'Select an inherited entry';

  // New console application dialog (CustomApplicationOptionsForm.pas)
  lisApplicationClassName = '&Application class name';
  lisTitle = '&Title';
  lisCodeGenerationOptions = 'Code generation options';
  lisUsageMessageHOption = 'Usage message (-h option)';
  lisStopOnException = 'Stop on exception';
  lisConstructorCode = 'Constructor code';
  lisDestructorCode = 'Destructor code';
  lisCheckOptions = 'Check options';
  lisNewConsoleApplication = 'New console application';

  // Edit context help dialog (IDEContextHelpEdit.pas)
  lisHelpEntries = 'Help entries';
  lisCEIsARootControl = 'Is a root control';
  lisHasHelp = 'Has Help';
  lisCreateHelpNode = 'Create Help node';
  lisDlgOpen = 'Open ...';
  lisEditContextHelp = 'Edit context help';
  lisNoNodeSelected = 'no node selected';
  lisNoIDEWindowSelected = 'No IDE window selected';

  // Messages Editor dialog (MsgViewEditor.pas)
  lisAddNewSet = 'Add new set';
  lisActiveFilter = 'Active Filter';
  lisFilterSets = 'Filter Sets';
  lisMessagesEditor = 'Messages Editor';

  lisSetDefault = 'Set default';
  lisSelectedLeftNeighbour = '(selected left neighbour)';
  lisSelectedRightNeighbour = '(selected right neighbour)';
  lisSelectedTopNeighbour = '(selected top neighbour)';
  lisSelectedBottomNeighbour = '(selected bottom neighbour)';

  rsCreatingDirFailed = 'Creating directory "%s" failed!';
  rsCreatingSymLinkFailed = 'Creating symbolic link "%s" failed!';
  rsCreatingSymLinkNotSupported = 'Creating symbolic link is not supported on this platform!';
  lisPutLrsFilesInOutputDirectory = 'Save .lrs files in the output directory';
  lisLrsIncludeFiles = 'lrs include files';
  lisResourceTypeOfNewFiles = 'Resource type of project';
  lisAutomaticallyConvertLfmFilesToLrsIncludeFiles = 'Automatically convert .lfm files to .lrs include files';
  lisFPCResources = 'FPC resources';
  lisRequiresFPC24OrAboveLikeDelphiResources = 'Requires FPC 2.4 or above. Like Delphi resources';
  lisStorePathDelimitersAndAs = 'Store path delimiters \ and / as';
  lisDoNotChange = 'Do not change';
  lisChangeToUnix = 'Change to Unix /';
  lisChangeToWindows = 'Change to Windows \';
  dlgCOCreateNodeAbove = 'Create node above';
  dlgCOCreateNodeBelow = 'Create node below';
  dlgCOCreateChildNode = 'Create child node';
  lisResult = 'Result :=';
  lisPropertiesOfConditionalCompilerOption = 'Properties of conditional compiler option';
  lisAction = 'Action:';
  lisValues = 'Values';
  lisDefaultValue = 'Default value';
  lisIDEMacros = 'IDE Macros';
  lisConfirmDelete = 'Confirm delete';
  lisDeleteMacro = 'Delete macro %s%s%s?';
  lisValue2 = 'Value%s';
  lisDeleteValue = 'Delete value %s%s%s';
  lisInvalidMacroTheMacroMustBeAPascalIdentifie = 'Invalid '
    +'macro %s%s%s. The macro name must be a pascal identifier.';
  lisThereIsAlreadyAMacroWithTheName = 'There is already a macro '
    +'with the name %s%s%s.';  
  lisDuplicateFoundOfValue = 'Duplicate found of value %s%s%s.';
  lisSetValue = 'Set value';
  lisCreateFunction = 'Create function';
  lisResult2 = 'Result:';
  lisTheIdentifierIsAUnitPleaseUseTheFileSaveAsFunction = 'The identifier is '
    +'a unit. Please use the File - Save as function to rename a unit.';
  lisRemoveSelectedUnits = 'Remove selected units';
  lisRemoveAllUnits = 'Remove all units';
  lisCEShowCodeObserver = 'Show observerations about';
  lisCELongProcedures = 'Long procedures';
  lisCEManyParameters = 'Many parameters';
  lisCEUnnamedConstants = 'Unnamed constants';
  lisCEEmptyProcedures = 'Empty procedures';
  lisCEManyNestedProcedures = 'Many nested procedures';
  lisCEPublishedPropertyWithoutDefault = 'Published properties without default';
  lisCEUnsortedVisibility = 'Unsorted visibility';
  lisCEUnsortedMembers = 'Unsorted members';
  lisCEToDos = 'ToDos';
  lisCEEmptyClassSections = 'Empty class sections';
  lisCELongProcLineCount = 'Line count of procedure treated as "long"';
  lisCELongParamListCount = 'Parameters count treated as "many"';
  lisCENestedProcCount = 'Nested procedures count treated as "many"';
  lisCodeObsCharConst = 'Search for unnamed char constants';
  lisCodeObsIgnoreeConstants = 'Ignore next unnamed constants';
  lisShow = 'Show';
  lisCodeObIgnoreConstInFuncs = 'Ignore constants in next functions';
  lisCEEmptyBlocks = 'Empty blocks';
  lisCEComplexityGroup = 'Complexity';
  lisCEEmptyGroup = 'Empty constructs';
  lisCEStyleGroup = 'Style';
  lisCEOtherGroup = 'Other';
  lisCEWrongIndentation = 'Wrong indentation';
  lisTheProjectUsesTargetOSAndCPUTheSystemPpuForThisTar = 'The project uses '
    +'target OS=%s and CPU=%s.%sThe system.ppu for this target was not found '
    +'in the FPC binary directories. %sMake sure fpc is installed correctly '
    +'for this target and the fpc.cfg contains the right directories.';
  lisCouldNotRemoveFromMainSource = 'Could not remove %s%s%s from main source!';
  lisCouldNotAddToMainSource = 'Could not add %s%s%s to main source!';
  lisCouldNotRemoveRFromMainSource = 'Could not remove %s{$R %s%s} from main source!';
  lisCouldNotAddRToMainSource = 'Could not add %s{$R %s%s} to main source!';
  lisCouldNotRemoveIFromMainSource = 'Could not remove %s{$I %s%s} from main source!';
  lisCouldNotAddIToMainSource = 'Could not add %s{$I %s%s} to main source!';
  lisFailedToLoadFoldStat = 'Failed to load fold state';
  lisUppercaseString = 'uppercase string';
  lisUppercaseStringGivenAsParameter = 'Uppercase string given as parameter';
  lisLowercaseString = 'lowercase string';
  lisLowercaseStringGivenAsParameter = 'Lowercase string given as parameter';
  lisPasteClipboard = 'paste clipboard';
  lisPasteTextFromClipboard = 'Paste text from clipboard';
  lisInsertProcedureHead = 'insert procedure head';
  lisInsertProcedureName = 'insert procedure name';
  lisInsertNameOfCurrentProcedure = 'Insert name of current procedure';
  lisInsertDate = 'insert date';
  lisInsertDateOptionalFormatString = 'Insert date. Optional: format string';
  lisInsertTime = 'insert time';
  lisInsertTimeOptionalFormatString = 'Insert time. Optional: format string';
  lisInsertDateAndTime = 'insert date and time';
  lisInsertDateAndTimeOptionalFormatString = 'Insert date and time. Optional: '
    +'format string';
  lisInsertEndIfNeeded = 'insert end if needed';
  lisCheckIfTheNextTokenInSourceIsAnEndAndIfNotReturnsL = 'check if the next '
    +'token in source is an end and if not returns lineend + end; + lineend';
  lisListOfAllCaseValues = 'list of all case values';
  lisReturnsListOfAllValuesOfCaseVariableInFrontOfVaria = 'returns list of '
    +'all values of case variable in front of variable';
  lisGetWordAtCurrentCursorPosition = 'get word at current cursor position';
  lisTemplateEditParamCell = 'Editable Cell';
  lisTemplateEditParamCellHelp =
     'Inserts an editable Cell. Cells can be navigated using the tab key.%0:s' +
     'The "param" macro takes a list of comma separated arguments.%0:s' +
     'The first argument is the default value.%0:s' +
     'The 2nd argument (optional) can be used to link the cell to another cell (syncro edit)%0:s' +
     '%0:s' +
     '  while param("foo") do param(foo);%0:s' +
     'Inserts 2 independent cells, both with the default text "foo"%0:s' +
     'The quotes are optional%0:s' +
     '%0:s' +
     '  if param("foo") > 0 and param("foo",sync=1) < 99 then%0:s' +
     'Inserts 2 linked cells, editing either one, will change the other one too%0:s' +
     'The value "1" refers to the position of the other "param()", so if there are more params:%0:s' +
     '  if param("bar") and param(foo) > 0 and param(foo,sync=2) < 99 then%0:s' +
     'The 2nd and third are linked. (the 3rd refers to "2") %0:s' +
     '%0:s' +
     '"sync can be shortened to "s":%0:s' +
     '  if param("foo") > 0 and param("foo",s=1) < 99 then%0:s' +
     '%0:s' +
     '  if param("bar") and param("foo") > 0 and param("foo",sync) < 99 then%0:s' +
     'The 2nd and third are linked.%0:s' +
     'Note: "Sync has no position and no "=", so it syncs to the previous cell with the same default (in this case "foo")' ;

  lisPrecedingWord = 'Preceding word';
  lisForm = 'Form';
  lisInheritedProjectComponent = 'Inherited project component';
  lisNewDlgInheritFromAProjectFormComponent = 'Inherit from a project form or component';
  lisFrame = 'Frame';
  lisDataModule = 'Data Module';
  lisNoLFMFile = 'No LFM file';
  lisThisFunctionNeedsAnOpenLfmFileInTheSourceEditor = 'This function needs '
    +'an open .lfm file in the source editor.';
  lisNoPascalFile = 'No pascal file';
  lisUnableToFindPascalUnitPasPpForLfmFile = 'Unable to find pascal unit (.'
    +'pas,.pp) for .lfm file%s%s%s%s';
  lisLFMIsOk = 'LFM is ok';
  lisClassesAndPropertiesExistValuesWereNotChecked = 'Classes and properties '
    +'exist. Values were not checked.';
  lisAppendShortDescriptionToLongDescription = 'Append short description to '
    +'long description';
  lisInsertPrintShortTag = 'Insert PrintShort tag';
  lisAutomaticallyInvokeAfterPoint = 'Automatically invoke after point';
  lisAddParameterBrackets = 'Add parameter brackets';
  lisReplaceWholeIdentifier = 'Replace whole identifier';
  lisEnableReplaceWholeIdentifierDisableReplacePrefix = 'Enable = replace '
    +'whole identifier, Disable = replace prefix';
  lisShowHelp = 'Show help';
  lisBestViewedByInstallingAHTMLControlLikeTurbopowerip = 'Best viewed by '
    +'installing a HTML control like turbopoweriprodsgn';
  lisShowEmptyUnitsPackages = 'Show empty units/packages';
  lisUsePackageInProject = 'Use package %s in project';
  lisUsePackageInPackage = 'Use package %s in package %s';
  lisRescan = 'Rescan';
  lisUseUnitInUnit = 'Use unit %s in unit %s';
  lisUsePackageInProject2 = 'Use package in project';
  lisUseIdentifier = 'Use identifier';
  lisUsePackageInPackage2 = 'Use package in package';
  lisFindMissingUnit = 'Find missing unit';
  lisAskNameOnCreate = 'Ask name on create';
  lisAskForComponentNameAfterPuttingItOnForm = 'Ask for component '
    +'name after putting it on a designer form';
  lisOFESwitchToObjectInspectorFavoritesTab = 'Switch to Object Inspector '
    +'Favorites tab';
  lisOFESwitchToObjectInspectorFavoritesTabAfterAsking = 'Switch to Object '
    +'Inspector Favorites tab after asking for component name';
  lisEmpty = 'Empty';
  lisNotAValidPascalIdentifier = 'Not a valid pascal identifier';
  lisThereIsAlreadyAComponentWithThisName = 'There is already a component '
    +'with this name';
  lisTheOwnerHasThisName = 'The owner has this name';
  lisTheOwnerClassHasThisName = 'The owner class has this name';
  lisTheUnitHasThisName = 'The unit has this name';
  lisChooseName = 'Choose name';
  lisChooseANameForTheNewComponent = 'Choose a name for the new component';
  lisTheComponentNameMustBeUniqueInAllComponentsOnTheFo = 'The component name '
    +'must be unique in all components on the form/datamodule.The name is '
    +'compared case insensitive like a normal pascal identifier.';
  lisAskForFileNameOnNewFile = 'Ask for file name on new file';
  lisSuggestDefaultNameOfNewFileInLowercase = 'Suggest default name of new '
    +'file in lowercase';
  lisAlwaysConvertSuggestedDefaultFileNameToLowercase = 'Always convert '
    +'suggested default file name to lowercase';
  lisIndentation = 'Indentation';
  lisExampleFile = 'Example file:';
  lisChooseAPascalFileForIndentationExamples = 'Choose a pascal file for '
    +'indentation examples';
  lisContextSensitive = 'Context sensitive';
  lisImitateIndentationOfCurrentUnitProjectOrPackage = 'Imitate indentation '
    +'of current unit, project or package';
  lisAddPackageRequirement = 'Add package requirement?';
  lisTheUnitBelongsToPackage = 'The unit belongs to package %s.';
  lisAddPackageToProject2 = 'Add package to project';
  lisAddUnitNotRecommended = 'Add unit (not recommended)';
  lisAddPackageToProject = 'Add package %s to project?';
  lisAddToIncludeSearchPath = 'Add to include search path?';
  lisTheNewIncludeFileIsNotYetInTheIncludeSearchPathAdd = 'The new include '
    +'file is not yet in the include search path.%sAdd directory %s?';
  lisOnBreakLineIEReturnOrEnterKey = 'On break line (i.e. return or enter key)';
  lisSetupDefaultIndentation = '(Setup default indentation)';
  lisIndentationForPascalSources = 'Indentation for pascal sources';
  lisOnPasteFromClipboard = 'On paste from clipboard';
  lisImpossible = 'Impossible';
  lisAProjectUnitCanNotBeUsedByOtherPackagesProjects = 'A project unit can '
    +'not be used by other packages/projects';
  lisShowGlyphsFor = 'Show Glyphs for:';
  lisDirectoryNotWritable = 'Directory not writable';
  lisTheDirectoryIsNotWritable = 'The directory %s%s%s is not writable.';
  lisBuildingLazarusFailed = 'Building Lazarus failed';
  lisThisSetOfOptionsToBuildLazarusIsNotSupportedByThis = 'This set of '
    +'options to build Lazarus is not supported by this installation.%sThe '
    +'directory %s%s%s is not writable.%sSee the Lazarus website for other '
    +'ways to install Lazarus.';
  lisIDEBuildOptions = 'IDE build options';
  lisPathOfTheInstantfpcCache = 'path of the instantfpc cache';
  lisPrimaryConfigPath = 'Primary config path';
  lisSecondaryConfigPath = 'Secondary config path';
  lisUnableToWriteTheProjectInfoFileError = 'Unable to write the project info '
    +'file%s%s%s%s.%sError: %s';
  lisSelected = 'Selected';
  lisSelectedAndChildControls = 'Selected and child controls';
  lisDeleteRow = 'Delete row';
  lisDeleteSetting = 'Delete setting';
  lisDeleteBuildMode = 'Delete build mode';
  lisUnableToDelete = 'Unable to delete';
  lisDeleteSetting2 = 'Delete setting?';
  lisDeleteSetting3 = 'Delete setting %s%s%s?';
  lisDeleteBuildMode2 = 'Delete build mode?';
  lisDeleteBuildMode3 = 'Delete build mode %s%s%s?';
  lisNewGroupASetOfModes = 'New group - a set of modes';
  lisSelectTheActiveBuildMode = 'Select the active build mode';
  lisSearchUnit = 'Search unit';

  //Jump History dialog
  lisJHJumpHistory = 'Jump History';
  lisNewTheGNUDebuggerThroughSshAllowsToRemoteDebugViaASsh =
      'The GNU debugger '
    +'through ssh allows to remote debug via a ssh connection. See docs/'
    +'RemoteDebugging.txt for details. The path must contain the ssh client.'
    +'Use SSH_Startup_Options for the hostname and optional username.'
    +'And Remote_GDB_Exe for the filename of gdb on the remote computer.'
    +'';
  lisRemoveUnitFromUsesSection = 'Remove unit from uses section';
  lisRemoveLocalVariable = 'Remove local variable %s';
  lisHideMessageViaDirective = 'Hide message via directive';
  lisRemoveLocalVariable2 = 'Remove local variable';
  lisNoHints = 'no hints';
  lisAllParametersOfThisFunctionAreAlreadySetAtThisCall = 'All parameters of '
    +'this function are already set at this call. Nothing to add.';
  lisToInstallYouMustCompileAndRestartTheIDE = 'To install you must compile '
    +'and restart the IDE';

  synfUnfoldAllInSelection      = 'Unfold all in selection';
  synfUnfoldCommentsInSelection = 'Unfold comments in selection';
  synfFoldCommentsInSelection   = 'Fold comments in selection';
  synfHideCommentsInSelection   = 'Hide comments in selection';
  lisCanNotCompileProject = 'Cannot compile project';
  lisTheProjectHasNoMainSourceFile = 'The project has no main source file.';
  lisInvalidMacroTheNameIsAKeyword = 'Invalid macro name "%s". The name '
    +'is a keyword.';
  lisTheMacroDoesNotBeginWith = 'The macro "%s" does not begin with "%s".';
  lisRenameTo = 'Rename to %s';
  lisAddValueToMacro = 'Add value to macro %s';
  lisDeleteValue2 = 'Delete value %s';
  lisNoMacroSelected = 'No macro selected';
  lisMacro = 'Macro %s';
  lisAddNewMacro = 'Add new macro';
  lisNoErrors = 'No errors';
  lisHintADefaultValueCanBeDefinedInTheConditionals = 'Hint: A default value '
    +'can be defined in the conditionals.';
  lisConditionals = 'Conditionals';
  lisWithIncludes = '%s, with includes %s';
  lisWithIncludes2 = ', with includes ';
  lisParsed = ', parsed ';
  lisCreatingFileIndexOfFPCSources =
    'Creating file index of FPC sources %s ...';
  lisTheFileIndexIsNeededForFunctionsLikeFindDeclaratio = 'The file index is '
    +'needed for functions like find declaration. While scanning you can edit '
    +'sources and compile, but functions like find declaration will show unit-'
    +'not-found errors. This can take a minute.';
  lisActive = 'Active';
  dlgBuildModes = 'Build Modes';
  dlgIdeMacroValues = 'IDE Macro Values';
  lisBuildModes = 'Build modes';
  lisInSession = 'In session';
  //lisEnableThisToStoreTheBuildModeInYourSessionLpsInste = 'Enable this to '
  //  +'store the build mode in your session (.lps) instead of the lpi';
  lisTheDefaultModeMustBeStoredInProject =
    'The default mode must be stored in project, not in session.';
  lisThereMustBeAtLeastOneBuildMode = 'There must be at least one build mode.';
  lisDuplicateEntry = 'Duplicate entry';
  lisThereIsAlreadyABuildModeWithThisName = 'There is already a build mode '
    +'with this name.';
  lisAddNewBuildModeCopyingSettingsFrom = 'Add new build mode, copying '
    +'settings from "%s"';
  lisDeleteMode = 'Delete mode "%s"';
  lisMoveOnePositionUp = 'Move "%s" one position up';
  lisMoveOnePositionDown = 'Move "%s" one position down';
  lisShowDifferencesBetweenModes = 'Show differences between modes ...';
  lisChangeBuildMode = 'Change build mode';
  lisWarningThisIsTheMainUnitTheNewMainUnitWillBePas = '%sWarning: This is '
    +'the main unit. The new main unit will be %s.pas.';
  lisDirectivesForNewUnit = 'Directives for new unit';
  lisRemoveFromInstallList = 'Remove from install list';
  lisKeepInInstallList = 'Keep in install list';
  lisInformationAboutUsedFPC = 'Information about used FPC';

  //Build mode differences dialog
  lisBuildModeDiffDifferencesBetweenBuildModes = 'Differences between build modes';
  lisMMWas = '(was "%s")';
  lisMMIDEMacro2 = 'IDE Macro %s:=%s';
  lisMMFromTo = 'From %s to %s';
  lisMMDoesNotHaveIDEMacro = 'Does not have IDE Macro %s:=%s';
  lisMMDoesNotOverrideOutDirFU = 'Does not override OutDir (-FU)';
  lisMMOverrideOutDirFU = 'Override OutDir (-FU): %s';
  lisBuildModeDiffMode = 'Mode:';
  lisBuildModeDiffDifferencesToOtherBuildModes = 'Differences to other build modes';

  //IDE info dialog
  lisIDEInfoInformationAboutTheIDE = 'Information about the IDE';

  //Delphi converter
  lisConvDelphiConvertDelphiUnit = 'Convert Delphi unit';
  lisConvDelphiConvertDelphiProject = 'Convert Delphi project';
  lisConvDelphiConvertDelphiPackage = 'Convert Delphi package';
  lisConvDelphiFindAllUnitFiles = '*** Find all unit files ***';
  lisConvDelphiRepairingFormFiles = '*** Fixing used units and Repairing form files ***';
  lisConvDelphiConvertingProjPackUnits = '*** Converting unit files belonging to project/package ***';
  lisConvDelphiConvertingFoundUnits = '*** Converting unit files found during conversion ***';
  lisConvDelphiRepairingFormFile = '* Repairing form file %s *';
  lisConvDelphiConvertingFile = '* Converting file %s *';
  lisConvDelphiFixingUsedUnits = '* Fixing used units for file %s *';
  lisConvDelphiChangedEncodingToUTF8 = 'Changed encoding from %s to UTF-8';
  lisConvDelphiErrorCanTFindUnit = '%s(%s,%s) Error: Can''t find unit %s';
  lisConvDelphiAllSubDirsScanned = 'All sub-directories will be scanned for unit files';
  lisConvDelphiMissingIncludeFile = '%s(%s,%s) missing include file';
  lisConvDelphiFixedUnitCase = 'Fixed character case of unit "%s" to "%s".';
  lisConvDelphiReplacedUnitInUsesSection = 'Replaced unit "%s" with "%s" in uses section.';
  lisConvDelphiRemovedUnitInUsesSection = 'Removed unit "%s" in uses section.';
  lisConvDelphiAddedCustomOptionDefines = 'Added defines %s in custom options';
  lisConvDelphiUnitsToReplaceIn = 'Units to replace in %s';
  lisConvDelphiConversionTook = 'Conversion took: %s';
  lisConvDelphiConversionReady = 'Conversion Ready.';
  lisConvDelphiConversionAborted = 'Conversion Aborted.';
  lisConvDelphiBeginCodeToolsFailed = 'BeginCodeTools failed!';
  lisConvDelphiError = 'Error="%s"';
  lisConvDelphiFailedConvertingUnit = 'Failed converting unit';
  lisConvDelphiFailedToConvertUnit = 'Failed to convert unit%s%s%s';
  lisConvDelphiExceptionDuringConversion = 'Exception happened during unit conversion.'
    +' Continuing with form files of already converted units...';
  lisConvDelphiUnitnameExistsTwice = 'Unitname exists twice';
  lisConvDelphiTwoUnitsWithSameName = 'There are two units with the same name:%s%s%s%s%s';
  lisConvDelphiUnitnameExistsInLCL = 'Unitname exists in LCL';
  lisConvDelphiUnitWithNameExistsInLCL = 'LCL already has a unit with name %s.'
    +' Delete local file %s?';
  lisConvDelphiRemoveFirst = 'Remove first';
  lisConvDelphiRemoveSecond = 'Remove second';
  lisConvDelphiKeepBoth = 'Keep both';
  lisConvDelphiPackageNameExists = 'Package name exists';
  lisConvDelphiProjOmittedUnit = 'Omitted unit %s from project';
  lisConvDelphiAddedPackageDependency = 'Added Package %s as a dependency.';
  lisConvDelphiPackageRequired = 'Package %s is required but not installed in Lazarus! Install it later.';
  lisConvDelphiThereIsAlreadyAPackageWithTheNamePleaseCloseThisPa = 'There is '
    +'already a package with the name "%s"%sPlease close this package first.';
  lisConvDelphiDelphiPackageMainSourceDpkFileNotFoundForPackage = 'Delphi '
    +'package main source (.dpk) file not found for package%s%s';

  //Disassembler dialog
  lisDisAssAssembler = 'Assembler';
  lisApplyConventions = 'Apply conventions';
  lisKeepRelativeIndentationOfMultiLineTemplate = 'Keep relative indentation '
    +'of multi line template';
  lisTheCurrentFPCHasNoConfigFileItWillProbablyMissSome = 'The current FPC '
    +'has no config file. It will probably miss some units. Check your '
    +'installation of fpc.';
  lisInFPCUnitSearchPathProbablyInstalledByTheFPCPackag = 'In FPC unit search '
    +'path. Probably installed by the FPC package. Check if the compiler and '
    +'the ppu file are from the same installation.';
  lisInASourceDirectoryOfTheProjectCheckForDuplicates = 'In a source '
    +'directory of the project. Check for duplicates.';
  lisInASourceDirectoryOfThePackage = 'In a source directory of the package "%s".';
  lisCheckTheTargetOSCPULCLWidgetTypeMaybeYouHaveToReco = '%s Check the '
    +'target (OS, CPU, LCL widget type). Maybe you have to recompile the '
    +'package for this target or set another target for the project.';
  lisMaybeYouHaveToRecompileThePackage = '%s Maybe you have to recompile the '
    +'package.';
  lisDuplicatePpuFilesDeleteOneOrMakeSureAllSearchPaths = 'Duplicate ppu '
    +'files. Delete one or make sure all search paths have correct order ('
    +'Hint: FPC uses last path first).';
  lisDuplicateSourcesDeleteOneOrMakeSureAllSearchPathsH = 'Duplicate sources. '
    +'Delete one or make sure all search paths have correct order (Hint: FPC '
    +'uses last path first).';
  lisPEMissingFilesOfPackage = 'Missing files of package %s';
  lisPENoFilesMissingAllFilesExist = 'No files missing. All files exist.';
  lisPERemoveSelectedFiles = 'Remove selected files';
  lisPEDirectories = 'Directories';
  lisSelectAnotherLCLWidgetSetMacroLCLWidgetType = 'Select another LCL widget '
    +'set (macro LCLWidgetType)';
  lisEndlessLoopInMacros = 'Endless loop in macros';

  // Uses Unit dialog
  dlgAlreadyUsesAllOtherUnits = '"%s" already uses all the units in this project';
  dlgUseUnitCaption = 'Add unit to Uses section';
  dlgShowAllUnits = 'Show all units';
  dlgInsertSection = 'Insert into Uses section of';
  dlgInsertInterface = 'Interface';
  dlgInsertImplementation = 'Implementation';
  dlgNoAvailableUnits = 'No available units to add.';
  lisInsteadOfCompilePackageCreateASimpleMakefile = 'Instead of compile '
    +'package create a simple Makefile.';

  // Custom form editor
  lisCFEAnExceptionOccuredDuringDeletionOf = 'An exception occured during '
    +'deletion of%s"%s:%s"%s%s';
  lisCFETCustomFormEditorDeleteComponentWhereIsTheTCustomN = 'TCustomFormEditor'
    +'.DeleteComponent  Where is the TCustomNonFormDesignerForm? %s';
  lisCFEUnableToClearTheFormEditingSelection = 'Unable to clear the form '
    +'editing selection%s%s';
  lisCFEDoNotKnowHowToDeleteThisFormEditingSelection = 'Do not know how to '
    +'delete this form editing selection';
  lisCFEDoNotKnowHowToCopyThisFormEditingSelection = 'Do not know how to copy '
    +'this form editing selection';
  lisCFEDoNotKnowHowToCutThisFormEditingSelection = 'Do not know how to cut '
    +'this form editing selection';
  lisCFETCustomFormEditorCreateNonFormFormUnknownType = 'TCustomFormEditor.'
    +'CreateNonFormForm Unknown type %s';
  lisCFETCustomFormEditorCreateNonFormFormAlreadyExists = 'TCustomFormEditor.'
    +'CreateNonFormForm already exists';
  lisCFETCustomFormEditorRegisterDesignerMediatorAlreadyRe = 'TCustomFormEditor'
    +'.RegisterDesignerMediator already registered: %s';
  lisCFEErrorCreatingComponent = 'Error creating component';
  lisCFEErrorCreatingComponent2 = 'Error creating component: %s%s%s';
  lisCFEInvalidComponentOwner = 'Invalid component owner';
  lisCFETheComponentOfTypeFailedToSetItsOwnerTo = 'The component of type %s '
    +'failed to set its owner to %s:%s';
  lisCFEErrorDestroyingMediatorOfUnit = 'Error destroying mediator %s of '
    +'unit %s:%s%s';
  lisCFEErrorDestroyingMediator = 'Error destroying mediator';
  lisCFEErrorDestroyingComponentOfTypeOfUnit = 'Error destroying component of '
    +'type %s of unit %s:%s%s';
  lisCFEErrorDestroyingComponent = 'Error destroying component';
  lisCFEContinueLoading = 'Continue loading';
  lisCFECancelLoadingThisResource = 'Cancel loading this resource';
  lisCFEStopAllLoading = 'Stop all loading';
  lisCFEErrorReading = 'Error reading %s';
  lisCFEComponent = '%s%sComponent: %s:%s';
  lisCFEComponentClass = '%s%sComponent Class: %s';
  lisCFEStreamPosition = '%s%sStream position: %s';
  lisCFEStream = '%sStream=%s';
  lisCFERoot = '%sRoot=%s:%s';
  lisCFEClassNotFound = '%s%sClass "%s" not found.';
  lisCFEInFile = '%sIn file %s%s';
  lisCFETheComponentEditorOfClassHasCreatedTheError = 'The component editor '
    +'of class "%s"has created the error:%s"%s"';
  lisShowSetupDialogForMostImportantSettings = 'Show setup dialog for most '
    +'important settings';
  lisShowPositionOfSourceEditor = 'Show position of source editor';

  //Initial setup dialog
  lisTheSourcesOfTheFreePascalPackagesAreRequiredForBro = 'The sources of the '
    +'Free Pascal packages are required for browsing and code completion. For '
    +'example it has the file "%s".';
  lisSelectPathTo = 'Select path to %s';
  lisSelectPathOf = 'Select path of %s';
  lisSelectFPCSourceDirectory = 'Select FPC source directory';
  lisSelectLazarusSourceDirectory = 'Select Lazarus source directory';
  lisWithoutAProperLazarusDirectoryYouWillGetALotOfWarn = 'Without a proper '
    +'Lazarus directory you will get a lot of warnings.';
  lisWithoutAProperCompilerTheCodeBrowsingAndCompilingW = 'Without a proper '
    +'compiler the code browsing and compiling will be disappointing.';
  lisWithoutAProperDebuggerDebuggingWillBeDisappointing = 'Without a proper '
    +'debugger, debugging will be disappointing.';
  lisWithoutTheProperFPCSourcesCodeBrowsingAndCompletio = 'Without the proper '
    +'FPC sources code browsing and completion will be very limited.';
  lisWithoutAProperMakeExecutableTheCompilingOfTheIDEIs = 'Without a proper "'
    +'make" executable the compiling of the IDE is not possible.';
  lisTheLazarusDirectoryContainsTheSourcesOfTheIDEAndTh = 'The Lazarus '
    +'directory contains the sources of the IDE and the package files of LCL '
    +'and many standard packages. For example it contains the file "ide%'
    +'slazarus.lpi". The translation files are located there too.';
  lisTheFreePascalCompilerExecutableTypicallyHasTheName = 'The Free Pascal '
    +'compiler executable typically has the name "%s". You can also use the '
    +'target specific compiler like "%s". Please give the full file path.';
  lisTheMakeExecutableTypicallyHasTheName = 'The "make" executable typically '
    +'has the name "%s". It is needed for building the IDE. Please give the full file path.';
  lisTheDebuggerExecutableTypicallyHasTheNamePleaseGive = 'The debugger '
    +'executable typically has the name "%s". Please give the full file path.';
  lisAUsefulSettingOnWindowsSystemsIsLazarusDirMingwBin = 'A useful setting on'
    +' Windows systems is: $(LazarusDir)\mingw\bin\$(TargetCPU)-$(TargetOS)\'
    +'gdb.exe';
  lisFoundVersionExpected = 'Found version %s, expected %s';
  lisInvalidVersionIn = 'invalid version in %s';
  lisWrongVersionIn = 'wrong version in %s: %s';
  lisFPCSources = 'FPC sources';
  lisConfigureLazarusIDE = 'Configure Lazarus IDE';
  lisFileIsNotAnExecutable = 'File is not an executable';
  lisThereIsNoFpcExeInTheDirectoryOfUsuallyTheMakeExecu = 'There is no fpc.exe'
    +' in the directory of %s. Usually the make executable is installed '
    +'together with the FPC compiler.';
  lisUnusualCompilerFileNameUsuallyItStartsWithFpcPpcOr = 'Unusual compiler '
    +'file name. Usually it starts with fpc, ppc or ppcross.';
  lisFpcCfgIsMissing = 'fpc.cfg is missing.';
  lisSystemPpuNotFoundCheckYourFpcCfg = 'system.ppu not found. Check your fpc.cfg.';
  lisClassesPpuNotFoundCheckYourFpcCfg = 'classes.ppu not found. Check your fpc.cfg.';
  lisWelcomeToLazarusIDE = 'Welcome to Lazarus IDE %s';
  lisStartIDE = 'Start IDE';
  lisUnableToLoadFile2 = 'unable to load file %s: %s';
  lisDirectoryNotFound2 = 'directory %s not found';
  lisFileNotFound3 = 'file %s not found';
  lisFileNotFound4 = 'file not found';
  lisISDDirectoryNotFound = 'directory not found';
  lisDebuggerFeedbackInformation = 'Debugger Information';
  lisDebuggerFeedbackWarning = 'Debugger Warning';
  lisDebuggerFeedbackError = 'Debugger Error';

  // breakpointgroups
  dbgBreakGroupDlgCaption = 'Select Groups';
  dbgBreakGroupDlgHeaderEnable = 'Select groups to enable when breakpoint is hit';
  dbgBreakGroupDlgHeaderDisable = 'Select groups to disable when breakpoint is hit';

  //Registers dialog
  regdlgDisplayTypeForSelectedRegisters = 'Display type for selected Registers';
  regdlgFormat = 'Format';
  regdlgHex = 'Hex';
  regdlgDecimal = 'Decimal';
  regdlgOctal = 'Octal';
  regdlgBinary = 'Binary';
  regdlgRaw = 'Raw';

  // Event log dialog
  lisEventLogOptions = 'Event Log Options ...';
  lisEventLogClear = 'Clear Events';
  lisEventLogSaveToFile = 'Save Events to File';
  lisEventsLogAddComment = 'Add Comment ...';
  lisEventsLogAddComment2 = 'Add Comment';
  lisCleanUpAndBuildProject = 'Clean up and build project';
  lisProjectOutputDirectory = 'Project output directory';
  lisProjectSourceDirectories = 'Project source directories';
  lisPackageOutputDirectories = 'Package output directories';
  lisPackageSourceDirectories = 'Package source directories';
  lisTheseFilesWillBeDeleted = 'These files will be deleted';
  lisCleanUpAndBuild = 'Clean up and build';
  lisBuildProject = 'Build project';
  lisCBPFiles = '%s (%s files)';
  lisCBPReallyDeleteSourceFiles = 'Really delete %s source files%s%s';
  lisChangesWereNotSaved = 'Changes were not saved';
  lisDoYouStillWantToOpenAnotherProject = 'Do you still want to open another project?';
  lisDiscardChangesAndOpenProject = 'Discard changes and open project';
  lisDoYouStillWantToCreateTheNewProject = 'Do you still want to create the '
    +'new project?';
  lisDiscardChangesCreateNewProject = 'Discard changes, create new project';
  lisDoYouStillWantToQuit = 'Do you still want to quit?';
  lisDiscardChangesAndQuit = 'Discard changes and quit';
  dbgBreakPropertyGroupNotFound = 'Some groups in the Enable/Disable list do not exist.%0:s'
    +'Create them?%0:s%0:s%1:s';
  lisFileIsDirectory = 'File is directory';
  lisUnableToCreateNewFileBecauseThereIsAlreadyADirecto = 'Unable to create '
    +'new file, because there is already a directory with this name.';

  // File Filters - Environment options
  lisFileFiltersTitle ='These are file filters that will appear in all File Open dialogs';
  lisFileFilters = 'File Filters';
  lisConfirm = 'Confirm';
  lisResetAllFileFiltersToDefaults = 'Reset all file filters to defaults?';
  lisFileFiltersMask = 'File mask';
  lisFileFiltersAddRow = 'Add Row';
  lisFileFiltersDeleteRow = 'Delete Row';
  lisFileFiltersInsertRow = 'Insert Row';
  lisFileFiltersSetDefaults = 'Set defaults';
  lisMenuPkgNewPackageComponent = 'New package component';
  lisSaveChangedFiles = 'Save changed files?';

  lisUIClearIncludedByReference = 'Clear include cache';
  lisChangeParent = 'Change Parent';
  lisLazarusIDE = 'Lazarus IDE';
  lisProject = 'Project %s';
  lisWhatNeedsBuilding = 'What needs building';
  lisTarget = 'Target:';
  lisDirectives = 'Directives';
  lisRecordedMacros = 'Recorded';
  lisRename2 = 'Rename ...';
  lisNewMacroName = 'Macro %d';
  lisEditorMacros = 'Editor macros';
  lisPlay = 'Play';
  lisRecord = 'Record';
  lisRepeat = 'Repeat';
  lisDeleteSelectedMacro = 'Delete selected macro?';
  lisReallyDelete = 'Really delete?';
  lisSaveMacroAs = 'Save macro as';
  lisLoadMacroFrom = 'Load macro from';
  lisProjectMacro = 'Project';
  lisNewRecordedMacrosNotToBeSaved = 'New recorded macros. Not to be saved';
  lisSavedWithProjectSession = 'Saved with project session';
  lisSavedWithIDESettings = 'Saved with IDE settings';
  lisMoveTo = 'Move to: ';
  lisFailedToSaveFile = 'Failed to save file.';
  lisEditKey = 'Edit Key';
  lisDuplicateName = 'Duplicate Name';
  lisAMacroWithThisNameAlreadyExists = 'A macro with this name already exists.';
  lisNewMacroname2 = 'New Macroname';
  lisEnterNewNameForMacroS = 'Enter new name for Macro "%s"';
  rsAttachTo = 'Attach to';
  rsEnterPID = 'Enter PID';
  lisFreePascalCompilerMessages = 'Free Pascal Compiler messages';
  lisRunAndDesignTimePackagesHaveNoLimitations = '"Run and Design time" '
    +'packages have no limitations.';
  lisDesignTimePackagesAddComponentsAndMenuItemsToTheID = '"Design time" '
    +'packages add components and menu items to the IDE. They can be used by '
    +'projects, but are not compiled into the project. The compiler will not '
    +'find units of this package when compiling the project.';
  lisRunTimePackagesCanBeUsedByProjectsTheyCanNotBeInst = '"Run time" packages'
    +' can be used by projects. They can not be installed in the IDE, unless '
    +'some design time package requires them.';
  lisRunTimeOnlyPackagesAreOnlyForProjectsTheyCanNotBeI = '"Run time only" '
    +'packages are only for projects. They can not be installed in the IDE, '
    +'not even indirectly.';
  lisPckEditCleanUpDependencies = 'Clean up dependencies ...';
  lisPkgCleanUpPackageDependencies = 'Clean up package dependencies';
  lisPkgTransitivity = 'Transitivity';
  lisPkgTheFollowingDependenciesAreNotNeededBecauseOfTheAu = 'The following '
    +'dependencies are not needed, because of the automatic transitivity '
    +'between package dependencies.';
  lisPkgDeleteDependencies = 'Delete dependencies';
  lisPkgClearSelection = 'Clear Selection';
  lisAlpha = 'Alpha';
  lisMMAppendArbitraryFpcOptionsEGO1GhtlDFlag = 'Append arbitrary fpc options,'
    +' e.g. -O1 -ghtl -dFlag';
  lisMMOverrideOutputDirectoryFUOfTarget = 'Override output directory -FU of '
    +'target';
  lisMMSetAnIDEMacroEGLCLWidgetTypeWin32 = 'Set an IDE macro, e.g.: '
    +'LCLWidgetType:=win32';
  lisMMMissingMacroName = 'missing macro name';
  lisMMExpectedMacroNameButFound = 'expected macro name, but found "%s"';
  lisMMInvalidCharacterInMacroValue = 'invalid character in macro value "%s"';
  lisMMExpectedAfterMacroNameButFound = 'expected ":=" after macro name, but '
    +'found "%s"';
  lisMMApplyToAllPackages = 'Apply to all packages.';
  lisMMTargets = 'Targets: ';
  lisMMApplyToAllPackagesAndProjects = 'Apply to all packages and projects.';
  lisMMApplyToProject = 'Apply to project.';
  lisMMApplyToAllPackagesMatching = 'Apply to all packages matching name "%s"';
  lisMMExcludeAllPackagesMatching = 'Exclude all packages matching name "%s"';
  lisMMStoredInIDEEnvironmentoptionsXml = 'Stored in IDE (environmentoptions.'
    +'xml)';
  lisMMStoredInProjectLpi = 'Stored in project (.lpi)';
  lisMMStoredInSessionOfProjectLps = 'Stored in session of project (.lps)';
  lisMMMoveSelectedItemUp = 'Move selected item up';
  lisMMMoveSelectedItemDown = 'Move selected item down';
  lisMMNewTarget = 'New Target';
  lisMMUndoLastChangeToThisGrid = 'Undo last change to this grid';
  lisMMRedoLastUndoToThisGrid = 'Redo last undo to this grid';
  lisMMCreateANewGroupOfOptions = 'Create a new group of options';
  lisMMDeleteTheSelectedTargetOrOption = 'Delete the selected target or option';
  lisMMSetS = 'Set "%s"';
  lisMMValueS = 'Value "%s"';
  lisMMAdditionsAndOverrides = 'Additions and Overrides';
  lisMMInvalidCharacterAt = 'invalid character "%s" at %s';
  lisMMCustomOption = 'Custom Option';
  lisMMIDEMacro = 'IDE Macro';
  lisMMOverrideOutputDirectory = 'Override output directory (-FU)';
  lisPriority = 'Priority';
  lisUDScanningUnits = 'Scanning: %s units ...';
  lisUDFile = 'File: %s';
  lisUDInterfaceUses = 'Interface Uses: %s';
  lisUDImplementationUses = 'Implementation Uses: %s';
  lisUDUsedByInterfaces = 'Used by Interfaces: %s';
  lisUDUsedByImplementations = 'Used by Implementations: %s';
  lisUDScanning = 'Scanning ...';
  lisUDInterfaceUses2 = 'interface uses: %s';
  lisUDImplementationUses2 = 'implementation uses: %s';
  lisUDUsedByInterfaces2 = 'used by interfaces: %s';
  lisUDUsedByImplementations2 = 'used by implementations: %s';
  lisUDProjectsAndPackages = 'Projects and packages';
  lisUDUnits = 'Units';
  lisUDAdditionalDirectories = 'Additional directories:';
  lisUDByDefaultOnlyTheProjectUnitsAndTheSourceEditorUnit = 'By default only '
    +'the project units and the source editor units are searched. Add here a '
    +'list of directories separated by semicolon to search as well.';
  lisUDAllPackageUnits = 'All package units';
  lisUDAllSourceEditorUnits = 'All source editor units';
  lisUDAllUnits = 'All units';
  lisUDShowNodesForDirectories = 'Show nodes for directories';
  lisUDShowNodesForProjectAndPackages = 'Show nodes for project and packages';
  lisUDSearchNextOccurrenceOfThisPhrase = 'Search next occurrence of this phrase';
  lisUDSearchPreviousOccurrenceOfThisPhrase = 'Search previous occurrence of '
    +'this phrase';
  lisUDSelectedUnits = 'Selected units';
  lisUDSearchNextUnitOfThisPhrase = 'Search next unit of this phrase';
  lisUDSearchPreviousUnitOfThisPhrase = 'Search previous unit of this phrase';
  lisUDExpandAllNodes = 'Expand all nodes';
  lisShowUnusedUnits = 'Show unused units ...';
  lisUDCollapseAllNodes = 'Collapse all nodes';
  lisUDFilter = '(Filter)';
  lisUDSearch = '(Search)';
  lisUDUnits2 = 'Units: %s';
  lisCTOUpdateAllMethodSignatures = 'Update all method signatures';
  lisCTOUpdateMultipleProcedureSignatures = 'Update multiple procedure '
    +'signatures';
  lisUpdateOtherProcedureSignaturesWhenOnlyLetterCaseHa = 'Update other '
    +'procedure signatures when only letter case has changed';

implementation

end.