paweld/lazarus
1
0
Fork 0
mirror of https://gitlab.com/freepascal.org/lazarus/lazarus.git synced 2025-11-04 12:29:27 +01:00
Code Issues Packages Projects Releases Wiki Activity
cfcbe4b9c7
lazarus/components/turbopower_ipro/ipstrms.pas
martin cf3dbb353e Fix Turbo IPro Handle 
git-svn-id: trunk@42142 -
2013-07-19 10:53:33 +00:00

1795 lines
51 KiB
ObjectPascal
Raw Blame History

{******************************************************************}
{* IPSTRMS.PAS - Various stream classes *}
{******************************************************************}
{ $Id$ }
(* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is TurboPower Internet Professional
*
* The Initial Developer of the Original Code is
* TurboPower Software
*
* Portions created by the Initial Developer are Copyright (C) 2000-2002
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Markus Kaemmerer <mk@happyarts.de> SourceForge: mkaemmerer
*
* ***** END LICENSE BLOCK ***** *)
{ Global defines potentially affecting this unit }
{$I IPDEFINE.INC}
unit IpStrms;
{- Ansi text stream class}
interface
uses
SysUtils,
Classes,
{$IFDEF IP_LAZARUS}
FPCAdds,
LCLType,
GraphType,
LCLIntf,
FileUtil,
{$ELSE}
Windows, // put Windows behind Classes because of THandle
{$ENDIF}
IpUtils,
IpConst;
const
IpFileOpenFailed = THandle(-1);
{ TIpMemMapStream }
type
TIpMemMapStream = class(TStream)
protected
FCanGrow : Boolean;
{ If True then the map file can grow if the user writes past the
current end of the stream. Note that growing may be expensive
time-wise. }
FDataSize : Longint;
{ The amount of data actually written to the stream. }
FGrowthFactor : Double;
{ The factor by which the map file is to be grow each time a size
increase is needed. }
FReadOnly : Boolean;
{ If set to True then file is to be opened for read-only access. }
FSize : Longint;
{ The current size of the mapped file. When creating files, the size
must be pre-set. The size is fixed unless the CanGrow property is
set to True. }
mmFileExists : Boolean;
{ Set to True if the file existed when the open method was called. }
mmFileHandle : THandle;
mmFileIsTemp : Boolean;
{ If set to True then file was created by this stream. }
mmFileName : string;
mmMapHandle : THandle;
mmPointer : Pointer;
{ Pointer to the beginning of the file. }
mmPos : Longint;
{ Current position in the file. }
{ Verification methods }
procedure CheckClosed(const aMethodName : string);
procedure CheckFileName;
procedure CloseFile;
procedure CloseMap;
procedure OpenFile;
procedure OpenMap;
procedure Resize(const NewSize : Longint);
procedure SetSize(NewSize : Longint); override;
public
constructor Create(const FileName : string;
const ReadOnly, Temporary : Boolean);
destructor Destroy; override;
procedure Open;
{ After the stream has been created, call this method to open the file. }
function Read(var Buffer; Count: Longint): Longint; override;
function Write(const Buffer; Count: Longint): Longint; override;
function Seek(Offset: Longint; Origin: Word): Longint; override;
property ReadOnly : Boolean read FReadOnly;
{ Returns True if the file is being opened in read-only mode. }
property CanGrow : Boolean read FCanGrow write FCanGrow;
{ If True then the mapped stream can grow in size when data is written
past the current end of the stream. Note this involves closing &
reopening the map which may be expensive time-wise.
Defaults to True. }
property DataSize : Longint read FDataSize;
{ The amount of data actually written to the stream. It is calculated
based upon the highest position to which data was written.
For example, if an app seeks to position 100 and writes 100 bytes
of data then the data size is 201. }
property GrowthFactor : Double read FGrowthFactor write FGrowthFactor;
{ The factor by which the stream will be grown in size if CanGrow is
True and data is written past the current end of stream.
Defaults to 0.25. }
property Memory: Pointer read mmPointer;
{ Points to the memory associated with the file. }
property Size : Longint read FSize write SetSize;
{ For temporary files, specify the maximum size of the file via this
property. }
end;
{ TIpBufferedStream }
type
TIpBufferedStream = class(TStream)
private {- property variables }
FBufCount: Longint;
FBuffer : PAnsiChar;
FBufOfs : Longint;
FBufPos : Longint;
FBufSize : Longint;
FDirty : Boolean;
FSize : {$IFDEF IP_LAZARUS}TStreamSeekType{$ELSE}longint{$ENDIF};
FStream : TStream;
protected {- methods }
procedure bsInitForNewStream; virtual;
procedure bsReadFromStream;
procedure bsSetStream(aValue : TStream);
procedure bsWriteToStream;
public {- methods }
constructor Create(aStream : TStream);
constructor CreateEmpty;
destructor Destroy; override;
procedure Flush; {!!.12}
{ Flush any unwritten changes to the stream. }
procedure FreeStream;
function ReadChar(var aCh : AnsiChar) : Boolean;
function Read(var Buffer; Count : Longint) : Longint; override;
function Seek(Offset : Longint; Origin : word) : Longint; override;
function Write(const Buffer; Count : Longint) : Longint; override;
public {-properties }
property FastSize: {$IFDEF IP_LAZARUS}TStreamSeekType{$ELSE}longint{$ENDIF}
read FSize;
property Stream : TStream
read FStream write bsSetStream;
end;
{ TIpAnsiTextStream }
type
TIpAnsiTextStream = class(TIpBufferedStream)
private {- property variables }
FLineEndCh : AnsiChar;
FLineLen : Integer;
FLineTerm : TIpLineTerminator;
FFixedLine : PAnsiChar;
FLineCount : Longint;
FLineCurrent : Longint;
FLineCurOfs : Longint;
FLineIndex : TList;
FLineInxStep : Longint;
FLineInxTop : Integer;
protected {- methods }
procedure atsGetLine(var aStartPos, aEndPos, aLen : Longint);
function atsGetLineCount : Longint;
procedure atsResetLineIndex;
procedure atsSetLineTerm(aValue : TIpLineTerminator);
procedure atsSetLineEndCh(aValue : AnsiChar);
procedure atsSetLineLen(aValue : Integer);
public {- properties }
property FixedLineLength : Integer
read FLineLen write atsSetLineLen;
property LineCount : Longint
read atsGetLineCount;
property LineTermChar : AnsiChar
read FLineEndCh write atsSetLineEndCh;
property LineTerminator : TIpLineTerminator
read FLineTerm write atsSetLineTerm;
public {- methods }
constructor Create(aStream : TStream);
destructor Destroy; override;
function AtEndOfStream : Boolean;
procedure bsInitForNewStream; override; {!!.01}
function ReadLine : string;
function ReadLineArray(aCharArray : PAnsiChar; aLen : Longint) : Longint;
function ReadLineZ(aSt : PAnsiChar; aMaxLen : Longint) : PAnsiChar;
function SeekNearestLine(aOffset : Longint) : Longint;
function SeekLine(aLineNum : Longint) : Longint;
procedure WriteLine(const aSt : string);
procedure WriteLineArray(aCharArray : PAnsiChar; aLen : Longint);
procedure WriteLineZ(aSt : PAnsiChar);
end;
{ TIpDownloadFileStream }
type
TIpDownloadFileStream = class(TStream)
private
FHandle : THandle;
FPath : string;
FFileName : string;
FRenamed : boolean;
protected
procedure dfsMakeTempFile(const aPath : string);
public
constructor Create(const aPath : string);
destructor Destroy; override;
function Read(var Buffer; Count : Longint) : Longint; override;
procedure Rename(aNewName : string);
procedure Move(aNewName: string);
function Seek(Offset : Longint; Origin : Word) : Longint; override;
function Write(const Buffer; Count : Longint) : Longint; override;
property Handle : THandle read FHandle;
property FileName : string read FFileName;
end;
{ TIpByteStream }
type
TIpByteStream = class
private {variables}
FStream : TStream;
BufEnd : Integer;
BufPos : Integer;
Buffer : array[0..1023] of Byte;
protected {methods}
function GetPosition : Integer;
function GetSize : Integer;
public {methods}
constructor Create(aStream : TStream);
destructor Destroy; override;
function Read(var b :Byte) : Boolean;
public {properties}
property Position : Integer
read GetPosition;
property Size : longint
read GetSize;
end;
implementation
const
LineTerm : array [TIpLineTerminator] of
array [0..1] of AnsiChar =
('', #13, #10, #13#10, '');
const
LineIndexCount = 1024;
LineIndexMax = pred(LineIndexCount);
{--- Helper routines ---------------------------------------------------------}
function MinLong(A, B : Longint) : Longint;
begin
if A < B then
Result := A
else
Result := B;
end;
{-----------------------------------------------------------------------------}
{ TIpMemMapStream }
{-----------------------------------------------------------------------------}
constructor TIpMemMapStream.Create(const FileName : string;
const ReadOnly, Temporary : Boolean);
begin
inherited Create;
FCanGrow := True;
FDataSize := 0;
FGrowthFactor := 0.25;
FReadOnly := ReadOnly;
FSize := 64 * 1024;
mmFileName := FileName;
mmFileIsTemp := Temporary;
end;
{-----------------------------------------------------------------------------}
destructor TIpMemMapStream.Destroy;
begin
CloseMap;
CloseFile;
{ If map file was temporary then get rid of it. }
if mmFileIsTemp and FileExistsUTF8(mmFileName) then
DeleteFileUTF8(mmFileName);
inherited;
end;
{-----------------------------------------------------------------------------}
procedure TIpMemMapStream.CheckClosed(const aMethodName : string);
begin
if mmFileHandle <> 0 then
raise EIpBaseException.CreateFmt(SMemMapMustBeClosed, [aMethodName]);
end;
{-----------------------------------------------------------------------------}
procedure TIpMemMapStream.CheckFileName;
begin
if mmFileName = '' then
raise EIpBaseException.Create(SMemMapFilenameRequired);
end;
{-----------------------------------------------------------------------------}
procedure TIpMemMapStream.CloseFile;
begin
{$IFDEF IP_LAZARUS}
writeln('TIpMemMapStream.CloseFile ToDo');
{$ELSE}
if mmFileHandle <> 0 then
CloseHandle(mmFileHandle);
{$ENDIF}
end;
{-----------------------------------------------------------------------------}
procedure TIpMemMapStream.CloseMap;
begin
{$IFDEF IP_LAZARUS}
writeln('TIpMemMapStream.CloseMap ToDo');
{$ELSE}
FlushViewOfFile(mmPointer, 0);
UnMapViewOfFile(mmPointer);
if mmMapHandle <> 0 then
CloseHandle(mmMapHandle);
{$ENDIF}
end;
{-----------------------------------------------------------------------------}
procedure TIpMemMapStream.Open;
begin
OpenFile;
OpenMap;
end;
{-----------------------------------------------------------------------------}
procedure TIpMemMapStream.OpenFile;
{$IFDEF IP_LAZARUS}
begin
writeln('TIpMemMapStream.OpenFile ToDo');
end;
{$ELSE}
var
CreateMode,
Flags,
OpenMode : DWORD;
begin
{ Check requirements. }
CheckFileName;
CheckClosed('Open');
{ Are we opening an existing file or creating a new file? }
if not FileExistsUTF8(mmFileName) then
CreateMode:= CREATE_ALWAYS
else
CreateMode := OPEN_EXISTING;
OpenMode := GENERIC_READ;
if FReadOnly then
Flags := FILE_ATTRIBUTE_NORMAL or FILE_FLAG_SEQUENTIAL_SCAN
else begin
OpenMode := OpenMode or GENERIC_WRITE;
Flags := FILE_ATTRIBUTE_NORMAL or FILE_FLAG_RANDOM_ACCESS;
end;
mmFileExists := (CreateMode = OPEN_EXISTING);
mmFileHandle := CreateFile(PChar(mmFileName),
OpenMode,
0, { exclusive }
nil,
CreateMode,
Flags,
0);
if mmFileHandle = INVALID_HANDLE_VALUE then
{ Raise exception. }
raise EIpBaseException.Create(SysErrorMessage(GetLastError) + SFilename +
mmFileName);
end;
{$ENDIF}
{-----------------------------------------------------------------------------}
procedure TIpMemMapStream.OpenMap;
{$IFDEF IP_LAZARUS}
begin
writeln('TIpMemMapStream.OpenMap ToDo');
end;
{$ELSE}
var
AccessMode,
ProtectMode,
SizeHigh : DWORD;
Size : DWORD;
begin
{ If this was an existing file then get the size of the file. }
if mmFileExists then begin
SizeHigh := 0;
Size := GetFileSize(mmFileHandle, @SizeHigh);
FSize := Size;
FDataSize := Size;
if Size = $FFFFFFFF then
{ Raise exception. }
raise EIpBaseException.Create(SysErrorMessage(GetLastError) + SFilename +
mmFileName);
end
else
Size := FSize;
{ Read-only? }
if FReadOnly then begin
AccessMode := FILE_MAP_READ;
ProtectMode := PAGE_READONLY;
end
else begin
AccessMode := FILE_MAP_ALL_ACCESS;
ProtectMode := PAGE_READWRITE;
end;
mmMapHandle := CreateFileMapping(mmFileHandle, nil, ProtectMode,
0, Size, nil);
if mmMapHandle = 0 then
{ Raise exception. }
raise EIpBaseException.Create(SysErrorMessage(GetLastError) + SFilename +
mmFileName);
mmPointer := MapViewOfFile(mmMapHandle, AccessMode, 0, 0, Size);
if mmPointer = nil then
raise EIpBaseException.Create(SysErrorMessage(GetLastError) + SFilename +
mmFileName);
mmPos := 0;
end;
{$ENDIF}
{-----------------------------------------------------------------------------}
procedure TIpMemMapStream.Resize(const NewSize : Longint);
var
SavPos : Longint;
begin
{ Close the map. }
if NewSize < FSize then
SavPos := 0
else
SavPos := mmPos;
CloseMap;
{$IFDEF IP_LAZARUS}
writeln('TIpMemMapStream.Resize ToDo');
{$ELSE}
{ Update the size of the file. }
if SetFilePointer(mmFileHandle, NewSize, nil, FILE_BEGIN) <> $FFFFFFFF then begin
if SetEndOfFile(mmFileHandle) = false then
raise EIpBaseException.Create(SysErrorMessage(GetLastError) + SFilename +
mmFileName);
end
else
raise EIpBaseException.Create(SysErrorMessage(GetLastError) + SFilename +
mmFileName);
{$ENDIF}
{ Update internal size information. }
FSize := NewSize;
if FSize < FDataSize then
FDataSize := FSize;
{ Re-open the map. }
mmFileExists := True;
OpenMap;
mmPos := SavPos;
end;
{-----------------------------------------------------------------------------}
procedure TIpMemMapStream.SetSize(NewSize : Longint);
begin
if mmFileHandle <> 0 then
Resize(NewSize);
FSize := NewSize;
end;
{-----------------------------------------------------------------------------}
function TIpMemMapStream.Read(var Buffer; Count: Longint): Longint;
begin
if mmFileHandle = 0 then
raise EIpBaseException.CreateFmt(SMemMapMustBeOpen, ['Read']);
if (mmPos + Count) > FDataSize then
Result := FDataSize - mmPos
else
Result := Count;
Move(PByteArray(mmPointer)[mmPos], Buffer, Result);
inc(mmPos, Result);
end;
{-----------------------------------------------------------------------------}
function TIpMemMapStream.Write(const Buffer; Count: Longint): Longint;
var
NewSize : Longint;
begin
if mmFileHandle = 0 then
raise EIpBaseException.CreateFmt(SMemMapMustBeOpen, ['Write']);
if not FReadOnly then begin
if (mmPos + Count) > FSize then begin
if FCanGrow then begin
{ Grow the stream. }
NewSize := FSize + Trunc(FSize * FGrowthFactor);
if NewSize < FSize + Count then
NewSize := FSize + Count;
Resize(NewSize);
Result := Count;
end
else
Result := FSize - mmPos;
end
else
Result := Count;
Move(Buffer, PByteArray(mmPointer)[mmPos], Result);
inc(mmPos, Result);
if mmPos > FDataSize then
FDataSize := mmPos + 1;
end
else
Result := 0;
end;
{-----------------------------------------------------------------------------}
function TIpMemMapStream.Seek(Offset: Longint; Origin: Word): Longint;
begin
if mmFileHandle = 0 then
raise EIpBaseException.CreateFmt(SMemMapMustBeOpen, ['Seek']);
case Origin of
soFromBeginning :
if Offset < 0 then
raise EIpBaseException.Create(SOriginFromBegin)
else
mmPos := Offset;
soFromCurrent :
mmPos := mmPos + Offset;
soFromEnd :
if Offset > 0 then
raise EIpBaseException.Create(SOriginFromEnd)
else
mmPos := FSize + Offset;
end; { case }
Result := mmPos;
end;
{-----------------------------------------------------------------------------}
{ TIpBufferedStream }
{-----------------------------------------------------------------------------}
const
BufferSize = 16384; // higher values for more speed but more memory
constructor TIpBufferedStream.Create(aStream : TStream);
begin
inherited Create;
{allocate the buffer}
FBufSize := BufferSize;
GetMem(FBuffer, FBufSize);
{save the stream}
if (aStream = nil) then
raise EIpBaseException.Create(SNoStreamErr);
FStream := aStream;
bsInitForNewStream;
end;
{-----------------------------------------------------------------------------}
constructor TIpBufferedStream.CreateEmpty;
begin
inherited Create;
{allocate the buffer}
FBufSize := BufferSize;
GetMem(FBuffer, FBufSize);
bsInitForNewStream
end;
{-----------------------------------------------------------------------------}
destructor TIpBufferedStream.Destroy;
begin
if (FBuffer <> nil) and (FStream <> nil) then
if FDirty then
bsWriteToStream;
FreeMem(FBuffer, FBufSize);
inherited Destroy;
end;
{-----------------------------------------------------------------------------}
procedure TIpBufferedStream.bsInitForNewStream;
begin
if (FStream <> nil) then
FSize := FStream.Size
else
FSize := 0;
FBufCount := 0;
FBufOfs := 0;
FBufPos := 0;
FDirty := false;
end;
{-----------------------------------------------------------------------------}
function TIpBufferedStream.ReadChar(var aCh : AnsiChar) : Boolean;
begin
{is there anything to read?}
if (FSize = (FBufOfs + FBufPos)) then begin
Result := false;
Exit;
end;
{if we get here, we'll definitely read a character}
Result := true;
{make sure that the buffer has some data in it}
if (FBufCount = 0) then
bsReadFromStream
else if (FBufPos = FBufCount) then begin
if FDirty then
bsWriteToStream;
FBufPos := 0;
inc(FBufOfs, FBufSize);
bsReadFromStream;
end;
{get the next character}
aCh := AnsiChar(FBuffer[FBufPos]);
inc(FBufPos);
end;
{-----------------------------------------------------------------------------}
procedure TIpBufferedStream.bsReadFromStream;
var
NewPos : Longint;
begin
{assumptions: FBufOfs is where to read the buffer
FBufSize is the number of bytes to read
FBufCount will be the number of bytes read}
NewPos := FStream.Seek(FBufOfs, soFromBeginning);
if (NewPos <> FBufOfs) then
raise EIpBaseException.Create(SNoSeekForRead);
FBufCount := FStream.Read(FBuffer^, FBufSize);
end;
{-----------------------------------------------------------------------------}
procedure TIpBufferedStream.bsSetStream(aValue : TStream);
begin
if (aValue <> FStream) then begin
{if the buffer is dirty, flush it to the current stream}
if FDirty and (FStream <> nil) then
bsWriteToStream;
{remember the stream and initialize all fields}
FStream := aValue;
bsInitForNewStream;
end;
end;
{-----------------------------------------------------------------------------}
procedure TIpBufferedStream.bsWriteToStream;
var
NewPos : Longint;
BytesWritten : Longint;
begin
{assumptions: FDirty is true
FBufOfs is where to write the buffer
FBufCount is the number of bytes to write
FDirty will be set false afterwards}
NewPos := FStream.Seek(FBufOfs, soFromBeginning);
if (NewPos <> FBufOfs) then
raise EIpBaseException.Create(SNoSeekForWrite);
BytesWritten := FStream.Write(FBuffer^, FBufCount);
if (BytesWritten <> FBufCount) then
raise EIpBaseException.Create(SCannotWriteToStream);
FDirty := false;
end;
{Begin !!.12}
{-----------------------------------------------------------------------------}
procedure TIpBufferedStream.Flush;
begin
if FDirty then
bsWriteToStream;
end;
{End !!.12}
{-----------------------------------------------------------------------------}
procedure TIpBufferedStream.FreeStream ;
begin
if (FBuffer <> nil) and (FStream <> nil) then begin
if FDirty then
bsWriteToStream;
FStream.Free;
FStream := nil;
end;
end;
{-----------------------------------------------------------------------------}
function TIpBufferedStream.Read(var Buffer; Count : Longint) : Longint;
var
BytesToGo : Longint;
BytesToRead : Longint;
BufAsBytes : TByteArray absolute Buffer;
DestPos : Longint;
begin
Result := 0;
if not Assigned(FStream) then
Exit;
{calculate the number of bytes we could read if possible}
BytesToGo := MinLong(Count, FSize - (FBufOfs + FBufPos));
{we will return this number of bytes or raise an exception}
Result := BytesToGo;
{are we going to read some data after all?}
if (BytesToGo > 0) then begin
{make sure that the buffer has some data in it}
if (FBufCount = 0) then
bsReadFromStream;
{read as much as we can from the current buffer}
BytesToRead := MinLong(BytesToGo, FBufCount - FBufPos);
{transfer that number of bytes}
Move(FBuffer[FBufPos], BufAsBytes[0], BytesToRead);
{update our counters}
inc(FBufPos, BytesToRead);
dec(BytesToGo, BytesToRead);
{if we have more bytes to read then we've reached the end of the
buffer and so we need to read another, and another, etc}
DestPos := 0;
while BytesToGo > 0 do begin
{if the current buffer is dirty, write it out}
if FDirty then
bsWriteToStream;
{position and read the next buffer}
FBufPos := 0;
inc(FBufOfs, FBufSize);
bsReadFromStream;
{calculate the new destination position, and the number of bytes
to read from this buffer}
inc(DestPos, BytesToRead);
BytesToRead := MinLong(BytesToGo, FBufCount - FBufPos);
{transfer that number of bytes}
Move(FBuffer[FBufPos], BufAsBytes[DestPos], BytesToRead);
{update our counters}
inc(FBufPos, BytesToRead);
dec(BytesToGo, BytesToRead);
end;
end;
end;
{-----------------------------------------------------------------------------}
function TIpBufferedStream.Seek(Offset : Longint; Origin : word) : Longint;
var
NewPos : Longint;
NewOfs : Longint;
begin
Result := 0;
if not Assigned(FStream) then
Exit;
{optimization: to help code that just wants the current stream
position (ie, reading the Position property), check for this as a
special case}
if (Offset = 0) and (Origin = soFromCurrent) then begin
Result := FBufOfs + FBufPos;
Exit;
end;
{calculate the desired position}
case Origin of
soFromBeginning : NewPos := Offset;
soFromCurrent : NewPos := (FBufOfs + FBufPos) + Offset;
soFromEnd : NewPos := FSize + Offset;
else
raise EIpBaseException.Create(SBadSeekOrigin);
NewPos := 0; {to fool the compiler's warning--we never get here}
end;
{force the new position to be valid}
if (NewPos < 0) then
NewPos := 0
else if (NewPos > FSize) then
NewPos := FSize;
{calculate the offset for the buffer}
NewOfs := (NewPos div FBufSize) * FBufSize;
{if the offset differs, we have to move the buffer window}
if (NewOfs <> FBufOfs) then begin
{check to see whether we have to write the current buffer to the
original stream first}
if FDirty then
bsWriteToStream;
{mark the buffer as empty}
FBufOfs := NewOfs;
FBufCount := 0;
end;
{set the position within the buffer}
FBufPos := NewPos - FBufOfs;
Result := NewPos;
end;
{-----------------------------------------------------------------------------}
function TIpBufferedStream.Write(const Buffer; Count : Longint) : Longint;
type
TIpByteArray = array[0..MaxInt-1] of Byte;
var
BytesToGo : Longint;
BytesToWrite: Longint;
BufAsBytes : TIpByteArray absolute Buffer;
DestPos : Longint;
begin
Result := 0;
if not Assigned(FStream) then
Exit;
{calculate the number of bytes we should be able to write}
BytesToGo := Count;
{we will return this number of bytes or raise an exception}
Result := BytesToGo;
{are we going to write some data?}
if (BytesToGo > 0) then begin
{try and make sure that the buffer has some data in it}
if (FBufCount = 0) and ((FBufOfs + FBufPos) < FSize) then
bsReadFromStream;
{write as much as we can to the current buffer}
BytesToWrite := MinLong(BytesToGo, FBufSize - FBufPos);
{transfer that number of bytes}
Move(BufAsBytes[0], FBuffer[FBufPos], BytesToWrite);
FDirty := true;
{update our counters}
inc(FBufPos, BytesToWrite);
if (FBufCount < FBufPos) then begin
FBufCount := FBufPos;
FSize := FBufOfs + FBufPos;
end;
dec(BytesToGo, BytesToWrite);
{if we have more bytes to write then we've reached the end of the
buffer and so we need to write another, and another, etc}
DestPos := 0;
while BytesToGo > 0 do begin
{as the current buffer is dirty, write it out}
bsWriteToStream;
{position and read the next buffer, if required}
FBufPos := 0;
inc(FBufOfs, FBufSize);
if (FBufOfs < FSize) then
bsReadFromStream
else
FBufCount := 0;
{calculate the new destination position, and the number of bytes
to write to this buffer}
inc(DestPos, BytesToWrite);
BytesToWrite := MinLong(BytesToGo, FBufSize - FBufPos);
{transfer that number of bytes}
if BytesToWrite > 0 then
Move(BufAsBytes[DestPos], FBuffer[0], BytesToWrite);
FDirty := true;
{update our counters}
inc(FBufPos, BytesToWrite);
if (FBufCount < FBufPos) then begin
FBufCount := FBufPos;
FSize := FBufOfs + FBufPos;
end;
dec(BytesToGo, BytesToWrite);
end;
end;
end;
{-----------------------------------------------------------------------------}
{ TIpAnsiTextStream }
{-----------------------------------------------------------------------------}
constructor TIpAnsiTextStream.Create(aStream : TStream);
begin
inherited Create(aStream);
{set up the line index variables}
atsResetLineIndex;
end;
{-----------------------------------------------------------------------------}
destructor TIpAnsiTextStream.Destroy;
begin
{if needed, free the fixed line buffer}
if (FFixedLine <> nil) then
FreeMem(FFixedLine, FixedLineLength);
{free the line index}
FLineIndex.Free;
inherited Destroy;
end;
{-----------------------------------------------------------------------------}
function TIpAnsiTextStream.AtEndOfStream : Boolean;
begin
Result := FSize = (FBufOfs + FBufPos);
end;
{-----------------------------------------------------------------------------}
procedure TIpAnsiTextStream.atsGetLine(var aStartPos, aEndPos, aLen : Longint);
var
Done : Boolean;
Ch : AnsiChar;
PrevCh : AnsiChar;
TempLineTerm: Integer;
begin
if (LineTerminator = ltNone) then begin
aStartPos := FBufOfs + FBufPos;
aEndPos := Seek(aStartPos + FixedLineLength, soFromBeginning);
aLen := aEndPos - aStartPos;
end
else begin
aStartPos := FBufOfs + FBufPos;
Ch := #0;
Done := false;
// use temp as local variable for speed
case LineTerminator of
ltCRLF : TempLineTerm := 0;
ltLF : TempLineTerm := 1;
ltCR : TempLineTerm := 2;
ltOther: TempLineTerm := 3;
else
raise EIpBaseException.Create(SBadLineTerminator);
end;
if FDirty then
bsWriteToStream;
while not Done do
begin
PrevCh := Ch;
{is there anything to read?}
if (FSize = (FBufOfs + FBufPos)) then begin
aEndPos := FBufOfs + FBufPos;
aLen := aEndPos - aStartPos;
Done := True;
end;
{make sure that the buffer has some data in it}
if (FBufCount = 0) then
bsReadFromStream
else if (FBufPos = FBufCount) then begin
FBufPos := 0;
inc(FBufOfs, FBufSize);
bsReadFromStream;
end;
{get the next character}
Ch := AnsiChar(FBuffer[FBufPos]);
inc(FBufPos);
case TempLineTerm of
0 : if (Ch = #10) then begin
Done := true;
aEndPos := FBufOfs + FBufPos;
if PrevCh = #13 then
aLen := aEndPos - aStartPos - 2
else
aLen := aEndPos - aStartPos - 1;
end;
1 : if (Ch = #10) then begin
Done := true;
aEndPos := FBufOfs + FBufPos;
aLen := aEndPos - aStartPos - 1;
end;
2 : if (Ch = #13) then begin
Done := true;
aEndPos := FBufOfs + FBufPos;
aLen := aEndPos - aStartPos - 1;
end;
3 : if (Ch = LineTermChar) then begin
Done := true;
aEndPos := FBufOfs + FBufPos;
aLen := aEndPos - aStartPos - 1;
end;
end;
end;
end;
end;
{-----------------------------------------------------------------------------}
function TIpAnsiTextStream.atsGetLineCount : Longint;
begin
if FLineCount < 0 then
Result := MaxLongInt
else
Result := FLineCount;
end;
{-----------------------------------------------------------------------------}
procedure TIpAnsiTextStream.atsResetLineIndex;
begin
{make sure we have a line index}
if (FLineIndex = nil) then begin
FLineIndex := TList.Create; {create the index: even elements are}
FLineIndex.Count := LineIndexCount * 2; {linenums, odd are offsets}
{if we didn't have a line index, set up some reasonable defaults}
FLineTerm := ltCRLF; {normal Windows text file terminator}
FLineEndCh := #10; {not used straight away}
FLineLen := 80; {not used straight away}
end;
FLineIndex[0] := pointer(0); {the first line is line 0 and...}
FLineIndex[1] := pointer(0); {...it starts at position 0}
FLineInxTop := 0; {the top valid index}
FLineInxStep := 1; {step count before add a line to index}
FLineCount := -1; {number of lines (-1 = don't know)}
FLineCurrent := 0; {current line}
FLineCurOfs := 0; {current line offset}
end;
{-----------------------------------------------------------------------------}
procedure TIpAnsiTextStream.atsSetLineTerm(aValue : TIpLineTerminator);
begin
if (aValue <> LineTerminator) and ((FBufOfs + FBufPos) = 0) then begin
{if there was no terminator, free the line buffer}
if (LineTerminator = ltNone) then begin
FreeMem(FFixedLine, FixedLineLength);
FFixedLine := nil;
end;
{set the new value}
FLineTerm := aValue;
{if there is no terminator now, allocate the line buffer}
if (LineTerminator = ltNone) then begin
GetMem(FFixedLine, FixedLineLength);
end;
atsResetLineIndex;
end;
end;
{-----------------------------------------------------------------------------}
procedure TIpAnsiTextStream.atsSetLineEndCh(aValue : AnsiChar);
begin
if ((FBufOfs + FBufPos) = 0) then begin
FLineEndCh := aValue;
atsResetLineIndex;
end;
end;
{-----------------------------------------------------------------------------}
procedure TIpAnsiTextStream.atsSetLineLen(aValue : Integer);
begin
if (aValue <> FixedLineLength) and ((FBufOfs + FBufPos) = 0) then begin
{validate the new length first}
if (aValue < 1) or (aValue > 1024) then
raise EIpBaseException.Create(SBadLineLength);
{set the new value; note that if there is no terminator we need to
free the old line buffer, and then allocate a new one}
if (LineTerminator = ltNone) then
FreeMem(FFixedLine, FixedLineLength);
FLineLen := aValue;
if (LineTerminator = ltNone) then
GetMem(FFixedLine, FixedLineLength);
atsResetLineIndex;
end;
end;
{-----------------------------------------------------------------------------}
procedure TIpAnsiTextStream.bsInitForNewStream;
begin
inherited bsInitForNewStream;
atsResetLineIndex;
end;
{-----------------------------------------------------------------------------}
function TIpAnsiTextStream.ReadLine : string;
var
CurPos : Longint;
EndPos : Longint;
Len : Longint;
StLen : Longint;
begin
if not Assigned(FStream) then
Exit;
atsGetLine(CurPos, EndPos, Len);
if (LineTerminator = ltNone) then begin
{at this point, Len will either equal FixedLineLength, or it will
be less than it because we read the last line of all and it was
short}
StLen := FixedLineLength;
{$IFDEF MSWindows}
SetLength(Result, StLen);
{$ELSE}
{$IFDEF IP_LAZARUS}
SetLength(Result, StLen);
{$ELSE}
if (StLen > 255) then
StLen := 255;
Result[0] := char(StLen);
{$ENDIF}
{$ENDIF}
if (Len < StLen) then
FillChar(Result[Len+1], StLen-Len, ' ');
end
else {LineTerminator is not ltNone} begin
{$IFDEF MSWindows}
SetLength(Result, Len);
{$ELSE}
{$IFDEF IP_LAZARUS}
SetLength(Result, Len);
{$ELSE}
if (Len > 255) then
Len := 255;
Result[0] := char(Len);
{$ENDIF}
{$ENDIF}
end;
{read the line}
Seek(CurPos, soFromBeginning);
if Len > 0 then
Read(Result[1], Len);
Seek(EndPos, soFromBeginning);
end;
{-----------------------------------------------------------------------------}
function TIpAnsiTextStream.ReadLineArray(aCharArray : PAnsiChar;
aLen : Longint)
: Longint;
var
CurPos : Longint;
EndPos : Longint;
Len : Longint;
StLen : Longint;
begin
Result := 0;
if not Assigned(FStream) then
Exit;
atsGetLine(CurPos, EndPos, Len);
if (LineTerminator = ltNone) then begin
{at this point, Len will either equal FixedLineLength, or it will
be less than it because we read the last line of all and it was
short}
StLen := FixedLineLength;
if (StLen > aLen) then
StLen := aLen;
if (Len < StLen) then
FillChar(aCharArray[Len], StLen-Len, ' ');
Result := StLen;
end
else {LineTerminator is not ltNone} begin
if (Len > aLen) then
Len := aLen;
Result := Len;
end;
Seek(CurPos, soFromBeginning);
Read(aCharArray[0], Len);
Seek(EndPos, soFromBeginning);
end;
{-----------------------------------------------------------------------------}
function TIpAnsiTextStream.ReadLineZ(aSt : PAnsiChar; aMaxLen : Longint) : PAnsiChar;
var
CurPos : Longint;
EndPos : Longint;
Len : Longint;
StLen : Longint;
begin
Result := nil;
if not Assigned(FStream) then
Exit;
Result := aSt;
atsGetLine(CurPos, EndPos, Len);
if (LineTerminator = ltNone) then begin
{at this point, Len will either equal FixedLineLength, or it will
be less than it because we read the last line of all and it was
short}
StLen := FixedLineLength;
if (StLen > aMaxLen) then
StLen := aMaxLen;
if (Len < StLen) then
FillChar(Result[Len], StLen-Len, ' ');
Result[StLen] := #0;
end
else {LineTerminator is not ltNone} begin
if (Len > aMaxLen) then
Len := aMaxLen;
Result[Len] := #0;
end;
Seek(CurPos, soFromBeginning);
Read(Result[0], Len);
Seek(EndPos, soFromBeginning);
end;
{-----------------------------------------------------------------------------}
function TIpAnsiTextStream.SeekNearestLine(aOffset : Longint) : Longint;
var
CurLine : Longint;
CurOfs : Longint;
CurPos : Longint;
EndPos : Longint;
Len : Longint;
i : Longint;
Done : Boolean;
L, R, M : Integer;
begin
Result := 0;
if not Assigned(FStream) then
Exit;
{if the offset we want is for the current line, reposition at the
current line offset, return the current line number and exit}
if (aOffset = FLineCurOfs) then begin
Seek(FLineCurOfs, soFromBeginning);
Result := FLineCurrent;
Exit;
end;
{if the offset requested is less than or equal to zero, just
position at line zero (ie, the start of the stream)}
if (aOffset <= 0) then begin
Seek(0, soFromBeginning);
FLineCurrent := 0;
FLineCurOfs := 0;
Result := 0;
Exit;
end;
{if the offset requested is greater than or equal to the size of the
stream, position at the end of the stream (note that if we don't
know the number of lines in the stream yet, FLineCount is set to
-1 and we can't take this shortcut because we need to return the
true value)}
if (FLineCount >= 0) and (aOffset >= FSize) then begin
Seek(0, soFromEnd);
FLineCurrent := FLineCount;
FLineCurOfs := FSize;
Result := FLineCount;
Exit;
end;
{if the offset requested is greater than the top item in the
line index, we shall have to build up the index until we get to the
line we require, or just beyond}
if (aOffset > {%H-}Longint(FLineIndex[FLineInxTop+1])) then begin
{position at the last known line offset}
CurLine := {%H-}Longint(FLineIndex[FLineInxTop]);
CurOfs := {%H-}Longint(FLineIndex[FLineInxTop+1]);
Seek(CurOfs, soFromBeginning);
Done := false;
{continue reading lines in chunks of FLineInxStep and add an index
entry for each chunk}
while not Done do begin
for i := 0 to pred(FLineInxStep) do begin
atsGetLine(CurPos, EndPos, Len);
inc(CurLine);
CurOfs := EndPos;
if (EndPos = FSize) then begin
Done := true;
Break;
end;
end;
if Done then
FLineCount := CurLine
else begin
inc(FLineInxTop, 2);
if (FLineInxTop = (LineIndexCount * 2)) then begin
{we've exhausted the space in the index: rescale}
FLineInxTop := FLineInxTop div 2;
for i := 0 to pred(FLineInxTop) do begin
if Odd(i) then
FLineIndex.Exchange((i*2)-1, i)
else
FLineIndex.Exchange(i*2, i);
end;
FLineInxStep := FLineInxStep * 2;
end;
FLineIndex[FLineInxTop] := {%H-}pointer(CurLine);
FLineIndex[FLineInxTop+1] := {%H-}pointer(CurOfs);
if (aOffset <= CurOfs) then
Done := true;
end;
end;
end;
{we can now work out where the nearest item in the index is to the
line we require}
L := 1;
R := FLineInxTop+1;
while (L <= R) do begin
M := (L + R) div 2;
if not Odd(M) then
inc(M);
if (aOffset < {%H-}Longint(FLineIndex[M])) then
R := M - 2
else if (aOffset > {%H-}Longint(FLineIndex[M])) then
L := M + 2
else begin
FLineCurrent := {%H-}Longint(FLineIndex[M-1]);
FLineCurOfs := {%H-}Longint(FLineIndex[M]);
Seek(FLineCurOfs, soFromBeginning);
Result := FLineCurrent;
Exit;
end;
end;
{the item at L-2 will have the nearest smaller offset than the
one we want, hence the nearest smaller line is at L-3; start here
and read through the stream forwards}
CurLine := {%H-}Longint(FLineIndex[L-3]);
Seek({%H-}Longint(FLineIndex[L-2]), soFromBeginning);
while true do begin
atsGetLine(CurPos, EndPos, Len);
inc(CurLine);
if (EndPos > aOffset) then begin
FLineCurrent := CurLine - 1;
FLineCurOfs := CurPos;
Seek(CurPos, soFromBeginning);
Result := CurLine - 1;
Exit;
end
else if (CurLine = FLineCount) or (EndPos = aOffset) then begin
FLineCurrent := CurLine;
FLineCurOfs := EndPos;
Seek(EndPos, soFromBeginning);
Result := CurLine;
Exit;
end;
end;
end;
{-----------------------------------------------------------------------------}
function TIpAnsiTextStream.SeekLine(aLineNum : Longint) : Longint;
var
CurLine : Longint;
CurOfs : Longint;
CurPos : Longint;
EndPos : Longint;
Len : Longint;
i : Longint;
Done : Boolean;
L, R, M : Integer;
begin
Result := 0;
if not Assigned(FStream) then
Exit;
{if the line number we want is the current line, reposition at the
current line offset, return the current line number and exit}
if (aLineNum = FLineCurrent) then begin
Seek(FLineCurOfs, soFromBeginning);
Result := FLineCurrent;
Exit;
end;
{if the line number requested is less than or equal to zero, just
position at line zero (ie, the start of the stream)}
if (aLineNum <= 0) then begin
Seek(0, soFromBeginning);
FLineCurrent := 0;
FLineCurOfs := 0;
Result := 0;
Exit;
end;
{if the line number requested is greater than or equal to the line
count, position at the end of the stream (note that if we don't
know the number of lines in the stream yet, FLineCount is set to
-1)}
if (FLineCount >= 0) and (aLineNum > FLineCount) then begin
Seek(0, soFromEnd);
FLineCurrent := FLineCount;
FLineCurOfs := FSize;
Result := FLineCount;
Exit;
end;
{if the line number requested is greater than the top item in the
line index, we shall have to build up the index until we get to the
line we require, or just beyond}
if (aLineNum > {%H-}Longint(FLineIndex[FLineInxTop])) then begin
{position at the last known line offset}
CurLine := {%H-}Longint(FLineIndex[FLineInxTop]);
CurOfs := {%H-}Longint(FLineIndex[FLineInxTop+1]);
Seek(CurOfs, soFromBeginning);
Done := false;
{continue reading lines in chunks of FLineInxStep and add an index
entry for each chunk}
while not Done do begin
for i := 0 to pred(FLineInxStep) do begin
atsGetLine(CurPos, EndPos, Len);
inc(CurLine);
CurOfs := EndPos;
if (EndPos = FSize) then begin
Done := true;
Break;
end;
end;
if Done then
FLineCount := CurLine
else begin
inc(FLineInxTop, 2);
if (FLineInxTop = (LineIndexCount * 2)) then begin
{we've exhausted the space in the index: rescale}
FLineInxTop := FLineInxTop div 2;
for i := 0 to pred(FLineInxTop) do begin
if Odd(i) then
FLineIndex.Exchange((i*2)-1, i)
else
FLineIndex.Exchange(i*2, i);
end;
FLineInxStep := FLineInxStep * 2;
end;
FLineIndex[FLineInxTop] := {%H-}pointer(CurLine);
FLineIndex[FLineInxTop+1] := {%H-}pointer(CurOfs);
if (aLineNum <= CurLine) then
Done := true;
end;
end;
end;
{we can now work out where the nearest item in the index is to the
line we require}
L := 0;
R := FLineInxTop;
while (L <= R) do begin
M := (L + R) div 2;
if Odd(M) then
dec(M);
if (aLineNum < {%H-}Longint(FLineIndex[M])) then
R := M - 2
else if (aLineNum > {%H-}Longint(FLineIndex[M])) then
L := M + 2
else begin
FLineCurrent := {%H-}Longint(FLineIndex[M]);
FLineCurOfs := {%H-}Longint(FLineIndex[M+1]);
Seek(FLineCurOfs, soFromBeginning);
Result := FLineCurrent;
Exit;
end;
end;
{the item at L-2 will have the nearest smaller line number than the
one we want; start here and read through the stream forwards}
CurLine := Longint({%H-}PtrInt(FLineIndex[L-2]));
Seek(Longint({%H-}PtrInt(FLineIndex[L-1])), soFromBeginning);
while true do begin
atsGetLine(CurPos, EndPos, Len);
inc(CurLine);
if (CurLine = FLineCount) or (CurLine = aLineNum) then begin
FLineCurrent := CurLine;
FLineCurOfs := EndPos;
Seek(EndPos, soFromBeginning);
Result := CurLine;
Exit;
end;
end;
end;
{-----------------------------------------------------------------------------}
procedure TIpAnsiTextStream.WriteLine(const aSt : string);
{Rewritten !!.15}
begin
if Length(aSt) > 0 then
WriteLineArray(@aSt[1], length(aSt))
else
WriteLineArray(nil, 0);
end;
{-----------------------------------------------------------------------------}
procedure TIpAnsiTextStream.WriteLineArray(aCharArray : PAnsiChar;
aLen : Longint);
var
C : AnsiChar;
begin
if not Assigned(FStream) then
Exit;
if (aCharArray = nil) then
aLen := 0;
if (LineTerminator = ltNone) then begin
if (aLen >= FixedLineLength) then
Write(aCharArray[0], FixedLineLength)
else begin
FillChar(FFixedLine[aLen], FixedLineLength-aLen, ' ');
if (aLen > 0) then
Move(aCharArray[0], FFixedLine[0], aLen);
Write(FFixedLine[0], FixedLineLength);
end;
end
else begin
if (aLen > 0) then
Write(aCharArray[0], aLen);
case LineTerminator of
ltNone : {this'll never get hit};
ltCR : Write(LineTerm[ltCR], 1);
ltLF : Write(LineTerm[ltLF], 1);
ltCRLF : Write(LineTerm[ltCRLF], 2);
ltOther: begin
C := LineTermChar;
Write(C, 1);
end;
else
raise EIpBaseException.Create(SBadLineTerminator);
end;
end;
end;
{-----------------------------------------------------------------------------}
procedure TIpAnsiTextStream.WriteLineZ(aSt : PAnsiChar);
var
LenSt : Longint;
begin
if not Assigned(FStream) then
Exit;
if (aSt = nil) then
LenSt := 0
else
LenSt := StrLen(aSt);
WriteLineArray(aSt, LenSt);
end;
{ TIpDownloadFileStream }
constructor TIpDownloadFileStream.Create(const aPath : string);
begin
FHandle := IpFileOpenFailed;
inherited Create;
dfsMakeTempFile(aPath);
FHandle := THandle(FileOpen(FFileName, fmShareDenyNone + fmOpenReadWrite));
if (Handle = IpFileOpenFailed) then
{$IFDEF Version6OrHigher}
RaiseLastOSError;
{$ELSE}
RaiseLastWin32Error;
{$ENDIF}
end;
destructor TIpDownloadFileStream.Destroy;
begin
{$IFDEF IP_LAZARUS}
writeln('ToDo: TIpDownloadFileStream.Destroy ');
{$ELSE}
FlushFileBuffers(FHandle);
if (Handle <> INVALID_HANDLE_VALUE) then
CloseHandle(Handle);
{$ENDIF}
inherited Destroy;
end;
procedure TIpDownloadFileStream.dfsMakeTempFile(const aPath : string);
begin
{ Make sure the path has no backslash. }
if aPath[length(aPath)] = '\' then
FPath := Copy(aPath, 1, pred(length(aPath)))
else
FPath := aPath;
{ Check that it really exists. }
if not DirExists(aPath) then
raise EIpBaseException.Create(SBadPath);
{ Create a new uniquely named file in that folder. }
FFileName := GetTemporaryFile(FPath); {!!.12}
end;
function TIpDownloadFileStream.Read(var Buffer; Count : Longint) : Longint;
{$IFDEF IP_LAZARUS}
begin
writeln('ToDo: TIpDownloadFileStream.Read ');
Result:=0;
end;
{$ELSE}
var
ReadOK : Bool;
begin
ReadOK := ReadFile(Handle, Buffer, Count, DWord(Result), nil);
if not ReadOK then begin
raise EIpBaseException.Create(SysErrorMessage(GetLastError) + SFilename + FFileName);
Result := 0;
end;
end;
{$ENDIF}
procedure TIpDownloadFileStream.Rename(aNewName : string);
var
NewFullName : string;
begin
{$IFDEF IP_LAZARUS}
writeln('ToDo: TIpDownloadFileStream.Rename ');
{$ENDIF}
{close the current handle}
{$IFNDEF IP_LAZARUS}
CloseHandle(Handle);
{$ENDIF}
FHandle := IpFileOpenFailed;
{calculate the full new name}
NewFullName := FPath + '\' + aNewName;
{rename the file}
{$IFDEF Version6OrHigher}
{$IFNDEF IP_LAZARUS}
if not MoveFile(PAnsiChar(FFileName), PAnsiChar(NewFullName)) then
RaiseLastOSError;
{$ENDIF}
{$ELSE}
Win32Check(MoveFile(PAnsiChar(FFileName), PAnsiChar(NewFullName)));
{$ENDIF}
{open up the same file, but with its new name}
FFileName := NewFullName;
try
FHandle := THandle(FileOpen(FFileName, fmShareDenyNone + fmOpenRead));
except
{ do nothing }
end;
if (Handle = IpFileOpenFailed) then
{$IFDEF Version6OrHigher}
RaiseLastOSError;
{$ELSE}
RaiseLastWin32Error;
{$ENDIF}
FRenamed := true;
end;
procedure TIpDownloadFileStream.Move(aNewName : string);
begin
{$IFDEF IP_LAZARUS}
writeln('ToDo: TIpDownloadFileStream.Move ');
{$ENDIF}
{close the current handle}
{$IFNDEF IP_LAZARUS}
CloseHandle(Handle);
{$ENDIF}
FHandle := IpFileOpenFailed;
{copy the file} {!!.01}
{$IFDEF Version6OrHigher}
{$IFNDEF IP_LAZARUS}
if not CopyFile(PAnsiChar(FFileName), PAnsiChar(aNewName), False) then
RaiseLastOSError;
{$ENDIF}
{$ELSE}
Win32Check(CopyFile(PAnsiChar(FFileName), {!!.01}
PAnsiChar(aNewName), False)); {!!.01}
{$ENDIF}
{open up the same file, but with its new name}
FFileName := aNewName;
try
FHandle := THandle(FileOpen(FFileName, fmShareDenyNone + fmOpenRead));
except
{ do nothing }
end;
if (Handle = IpFileOpenFailed) then
{$IFDEF Version6OrHigher}
RaiseLastOSError;
{$ELSE}
RaiseLastWin32Error;
{$ENDIF}
FRenamed := true;
end;
function TIpDownloadFileStream.Seek(Offset : Longint; Origin : Word) : Longint;
begin
{$IFDEF IP_LAZARUS}
writeln('ToDo: TIpDownloadFileStream.Seek');
Result := 0;
{$ELSE}
Result := SetFilePointer(Handle, Offset, nil, Origin);
{$ENDIF}
end;
function TIpDownloadFileStream.Write(const Buffer; Count : Longint) : Longint;
{$IFDEF IP_LAZARUS}
begin
writeln('ToDo: TIpDownloadFileStream.Write');
Result:=Count;
end;
{$ELSE}
var
WriteOK : Bool;
begin
WriteOK := WriteFile(Handle, Buffer, Count, DWord(Result), nil);
if not WriteOK then begin
raise EIpBaseException.Create(SysErrorMessage(GetLastError) + SFilename + FFileName);
Result := 0
end;
end;
{$ENDIF}
{ TIpByteStream }
constructor TIpByteStream.Create(aStream : TStream);
begin
inherited Create;
FStream := aStream;
end;
destructor TIpByteStream.Destroy;
begin
inherited Destroy;
end;
function TIpByteStream.Read(var b : Byte) : Boolean;
begin
Result := True;
if (BufPos = BufEnd) then begin
BufPos := 0;
BufEnd := FStream.Read(Buffer, SizeOf(Buffer));
if (BufEnd = 0) then begin
Result := False;
Exit;
end;
end;
b := Buffer[BufPos];
Inc(BufPos);
end;
function TIpByteStream.GetPosition : Integer;
begin
Result := FStream.Position - BufEnd + BufPos;
end;
function TIpByteStream.GetSize : Integer;
begin
Result := FStream.Size;
end;
end.
Reference in New Issue View Git Blame Copy Permalink