their default alignment, the alignment of locals, globals and constants
(so that we don't overestimate the alignment of global normal set
constants to 32 bytes, while the maximum const alignment is often only
8 bytes)
git-svn-id: trunk@40374 -
so that they can still be freed after the reference has been changed
(e.g. in case of array indexing or record field accesses) (mantis #33628)
git-svn-id: trunk@38814 -
a load node for a procsym has a self pointer, that we have to create
a procvar with a self pointer (e.g. when loading the address of a
static class method). Avoids the generation of superfluous code to
load self which is then not used afterwards
git-svn-id: trunk@35005 -
o separate information for reading and writing, because e.g. in a
try-block, only the writes to local variables and parameters are
volatile (they have to be committed immediately in case the next
instruction causes an exception)
o for now, only references to absolute memory addresses are marked
as volatile
o the volatily information is (should be) properly maintained throughout
all code generators for all archictures with this patch
o no optimizers or other compiler infrastructure uses the volatility
information yet
o this functionality is not (yet) exposed at the language level, it
is only for internal code generator use right now
git-svn-id: trunk@34996 -
and getters for the ttemp*node classes instead
o this will allow descendants to prevent certain flags from being added
or removed. E.g. for LLVM, certain temps must never be put in registers
because it cannot typecast a value in a register from a non-record/array
type to an array type without forcing it to memory (so if that is done
on an lvalue, the result will be written to the memory temp instead of
to the register)
git-svn-id: trunk@34358 -
release the source location in case it was also a temp. Reason: we
don't increase reference counts when assigning to a ti_const (they are
like const parameters), so the original value must stay alive until
the ti_const temp is freed
o free the original data in the ttempdelete node for the ti_const temp
o don't increase reference counts when assigning composite types to
ti_const temps either
git-svn-id: trunk@34287 -
it was AT_NONE, which is invalid and should never be used
* explicitly pass the correct value for all calls to those methods elsewhere
in the compiler
git-svn-id: trunk@34250 -
tasmdata.DefineAsmSymbol() and all routines that call it
o will be used to automatically generate AB_INDIRECT sybols when
necessary
git-svn-id: trunk@34164 -
Merged revision(s) 28239-28289 from branches/svenbarth/packages:
Provide the possiblity to switch between the direct and indirect RTTI symbols.
ncgrtti.pas, TRTTIWriter:
+ get_rtti_label, get_rtti_label_ord2str & get_rtti_label_str2ord: add new "indirect" parameter and pass that along to rtti_mangledname
hlcgobj.pas, thlcgobj:
* g_incrrefcount, g_initialize, g_finalize, g_array_rtti_helper: for now pass along False to get_rtti_label()
ncgvmt.pas, TVMTWriter:
* writevmt: for now pass along False to get_rtti_label()
ncgld.pas, tcgrttinode:
* pass_generate_code: for now pass along False to the get_rtti_label*() methods
........
Provide possibility to select between using a direct and an indirect RTTI reference. This way the references can be changed for selected cases.
ncgrtti, TRTTIWriter:
* ref_rtti: new "indirect" parameter that's relayed to rtti_mangledname()
* write_rtti_reference: new "indirect" paramater that's relayed to ref_rtti()
........
Switch properties to use the indirect type information without breaking backwards compatiblity. :)
compiler/ncgrtti.pas, TRTTIWriter:
* published_properties_write_rtti_data: use the indirect reference, not the direct one
rtl/objpas/typinfo.pp:
* to allow compilation with both 2.6.x and 2.7.1 and too avoid too many ifdefs at least in the declarations we define a macro TypeInfoPtr which is either PTypeInfo (2.6.x) or PPTypeInfo (2.7.1 and newer)
* TPropInfo: rename PropType to PropTypeRef and change type to TypeInfoPtr
+ TPropInfo: add a new property PropType which returns a PTypeInfo out of the PropTypeRef depending on the compiler version
........
Switch further simple types (sets, enums, class references, pointers) to indirect type information (again without breaking backwards compatibility).
compiler/ncgrtti.pas, TRTTIWriter.write_rtti_data:
* enumdef_rtti, setdef_rtti, classrefdef_rtti & pointerdef_rtti: write an indirect RTTI reference
rtl/objpas/typinfo.pp, TTypeData:
* rename BaseType to BaseTypeRef, CompType to CompTypeRef, InstanceType to InstanceTypeRef and RefType to RefTypeRef and change their type to TypeInfoPtr
+ add properties BaseType, CompType, InstanceType & RefType which return a PTypeInfo out of the corresponding *Ref field depending on the compiler version
........
Switch class and interface parent as well as extended type to indirect type information
compiler/ncgrtti.pas, TRTTIWriter:
* write_rtti_data.objectdef_rtti.objectdef_rtti_class_full: use indirect reference for class parent and extended type
* write_rtti_data.objectdef_rtti.objectdef_rtti_interface_full: use indirect reference for interface parent
rtl/objpas/typinfo.pp, TTypeData:
+ add new method DerefTypeInfoPtr which returns Nil if the indirect reference is Nil and otherwise returns the dereferences indirect reference (for 2.6.x the direct reference is returned as is)
* rename ParentInfo to ParentInfoRef, HelperParent to HelperParentRef, ExtendedInfo to ExtendedInfoRef, IntfParent ot IntfParentRef and RawIntfParent to RawIntfParentRef and change their type to TypeInfoPtr
+ introduce ParentInfo, HelperParent, ExtendedInfo, IntfParent and RawIntfParent properties that return a PTypeInfo and use the new DerefTypeInfoPtr to return the correct type info value
* change the other newly introduced properties of TTypeData to use DerefTypeInfoPtr as well to be on the safe side
........
Switch record/object fields to indirect type information references.
compiler/ncgrtti.pas, TRTTIWriter.fields_write_rtti_data:
* use the indirect reference for the object parent type
* use the indirect reference for the field type
rtl/inc/rtti.inc:
* TRecordElement: change TypeInfo to PPointer for 2.7.1 and newer
* RecordRTTI: correctly dereference the element type for 2.7.1 and newer
* fpc_copy: correctly reference the element type for 2.7.1 and newer
........
Switch static arrays to indirect RTTI reference.
compiler/ncgrtti.pas, TRTTIWriter.write_rtti_data:
* arraydef_rtti: write the dimension types and the final field type as indirect references
rtl/inc/rtti.inc:
* TArrayInfo: switch ElInfo to PPointer for 2.7.1+
* ArrayRTTI & fpc_copy: correctly dereference ElInfo for 2.7.1+
rtl/objpas/typinfo.pp, TArrayTypeData:
* switch ElType and Dims to PPTypeInfo; no backwards compatibility needed here as TArrayTypeData was added in 2.7.1 only
tests/test/trtti8.pp: fix test
........
Switch dynamic arrays to indirect RTTI references.
compiler/ncgrtti.pas, TRTTIWriter.write_rtti_data.arraydef_rtti:
* write indirect references for the two element entries
rtl/inc/dynarr.inc:
* tdynarraytypedata: change elType2 to PPointer for 2.7.1+
* fpc_dynarray_clear, fpc_dynarray_setlength & fpc_dynarray_copy: correctly dereference elType2 for 2.7.1+
rtl/objpas/typinfo.pp, TTypeData:
* rename elType and elType2 to elTypeRef and elType2Ref respectively and change type to TypeInfoPtr
* add properties elType and elType2 which return PTypeInfo by dereferencing elTypeRef and elType2Ref respecively correctly
* remove a few stray "inline" directives in the implementation
........
Switch procedure parameters and result type to indirect RTTI references.
compiler/ncgrtti.pas, TRTTIWriter.write_rtti_data.procvardef_rtti:
* write_procedure_param: use indirect RTTI reference
* write result info for both methods and procvars as indirect RTTI reference
* write parameters for procvars as indirect RTTI reference
rtl/objpas/typinfo.pp:
* TProcedureParam: change type of ParamType to PPTypeInfo (no backwards compatiblity needed here; was added for 2.7.1)
* TProcedureSignature: change type of RseultType to PPTypeInfo (no backwards compatibility needed here; was added for 2.7.1)
* TTypeData: remark in the comments of tkMethod that ResultTypeRef and ParamTypeRefs are of type PPTypeInfo and not PTypeInfo
tests/test/trtti9.pp:
* fix test
........
Remove no longer needed "indirect" parameter for TRTTIWriter methods.
ncgrtti.pas, TRTTIWriter:
- ref_rtti & write_rtti_reference: remove "indirect" parameter
* ref_rtti: call rtti_mangledname with "indirect" always set to "true"
- remove "true" parameter on callsites of write_rtti_reference & ref_rtti
........
git-svn-id: trunk@33944 -
ncgld.pas, tcgloadnode:
+ new method use_indirect_symbol to determine whether using an indirect reference is necessary at all
* generate_threadvar_access & pass_generate_code: pass result of use_indirect_code() to RefAsmSymbol() for using an indirect access if needed
git-svn-id: trunk@33282 -
a pointer to a vmt, but a pointer to a pointer to vmt (mantis #29086)
o also adjusted the llvm type for interfaces accordingly
git-svn-id: trunk@32530 -
thlcgobj.g_set_addr_nonbitpacked_field_ref() and adjusted it so that
it also works for objects/classes (if the incoming reference points
to the start of the class contents)
o factored out the related code from tllvmsubscriptnode
git-svn-id: trunk@32411 -
