{$modeswitch arraytodynarray} is active (mantis #35576)
o changed compiler to compile without this modeswitch
o added the modeswitch to a test that depends on it
git-svn-id: trunk@42118 -
procoptions even when it's through an array-of-const parameter
* always call create_varargs_paraloc_info() instead of create_paraloc_info()
in the former case, even when no varargs parameters are specified (because
on some platforms even some non-variadic parameters need to be passed
differently, such as on ARM with gnueabihf)
git-svn-id: trunk@41420 -
so that they can still be freed after the reference has been changed
(e.g. in case of array indexing or record field accesses) (mantis #33628)
git-svn-id: trunk@38814 -
tcpuparamanager, very similar to the existing get_volatile_registers_XXX. The
new methods are called get_saved_registers_XXX, where XXX is the register
type ("int", "address", "fpu" or "mm")
git-svn-id: trunk@38794 -
The parameter manager converts from the internal compiler representation of
a parameter's location to an RTTI representation. As the general implementation
more or less directly uses the compiler structures for this a platform specific
parameter manager may override this functionality in case some parameter
information changed in a non-backwards compatible way.
The RTTI parameter location has a layout that allows for an easy enumeration
as the size is fixed for all locations. Additionally there are properties that
allow for easy access to the information stored in them.
git-svn-id: trunk@35250 -
a temporary parameter location if the original location was not a reference
(because in that case part of the reference overlaps with the shiftval
variant field, and if we optimise the temp location into a register,
this register will get a random/bogus shiftval)
git-svn-id: trunk@32599 -
"don't free even if not registered"; use for defs that may not be written
to a ppu file, but that must nevertheless survive the compilation of the
current module
* mark all defs created for para locations as "don't free even if not
registered", because we don't discard and recalculate all para locations
after a module has been compiled (since that's not needed)
o solves issues if the paralocations for a routine in the interface of
unit A are calculated while the implementation of unit B gets
compiled, and a new reusable type is allocated at that point which
is not used anywhere else (after r32160)
git-svn-id: trunk@32235 -
(leftover from my initial hacky implementation of returning int64 function
results in ax:bx:cx:dx, that is no longer in use?)
git-svn-id: trunk@27662 -
paramgr.pas, tparamanager:
+ add virtual get_volatile_registers_address method which by default returns an empty set
cgobj.pas, tcg:
* allocallcpuregisters: also allocate address registers if needed
* deallocallcpuregisters: also deallocate address registers if needed
ncgcal.pas, tcgcallnode.pass_generate_code:
* (de)allocate address registers
* keep result from being deallocated if it should be an address register (currently by no architecture...)
m68k/cpupara.pas, tm68kparamanager:
+ get_volatile_registers_address: return a0 and a1 as volatile registers
m68k/n68kmat.pas, tm68kmoddivnode.call_rtl_divmod_reg_reg:
* (de)allocate address registers
git-svn-id: trunk@25633 -
contains the tcgsize of the entire parameter rather than only of
what is left (-> calculate it from the remaining parameter length)
git-svn-id: trunk@24776 -
symconst.pas:
+ extend "thelpertype" by "ht_type" which tells the code in "pdecobj.parse_extended_type" that a type helper declaration has been parsed
node.pas:
+ add a constant which identifies all constant node types
ptype.pas:
+ read_named_type: add a parameter "hadtypetoken" to tell the code whether a "type" token had been parsed before
+ read_named_type: if an identifier "helper" is parsed we need to check whether "hadtypetoken" is true and the modeswitch "m_class" is set, but the "m_delphi" one is not; in that case we have a "type helper" declaration
pgenutil.pas, generate_specialization:
* adjust call to read_named_type
pdecl.pas, types_dec:
* adjust call to read_named_type
pdecobj.pas:
* parse_extended_type: extend for correct handling of primitive types (includes Delphi compatible handling as well) and reject types that are explicitly not allowed
* method_dec: require "static" for class methods in type helpers
* method_doc: allow constructors for type helpers as well
paramgr.pas, tparamanager:
* set_common_funcretloc_info: handle type helper constructors like record constructors
* handle_common_ret_in_param: the "self" value of a type helper constructor is also returned in a parameter
pexpr.pas:
+ add a function to postfixoperators which tries to find and apply a type helper for a given type
* postfixoperators: try to apply type helpers for ordinal constants
* postfixoperators: use the correct string type for string constants
* postfixoperators: try to apply type helpers for enum constants
* postfixoperators: try to apply type helpers for arrays
* postfixoperators: try to apply type helpers for Variant
* postfixoperators: try to apply type helpers for pointer types
* postfixoperators: try to apply type helpers for other types
* factor: check postfixoperators after _REALNUMBER, _CCHAR, _CWCHAR, _TRUE and _FALSE
* factor: also check postfixoperators if a _POINT follows a _NIL
symdef.pas, tdefawaresymtablestack.addhelpers:
* use "generate_objectpascal_helper_key" to generate the key
symtable.pas:
+ add function to generate the key value for the map of extended types using the extended def
* adjust "search_last_objectpascal_helper" and "search_objectpascal_helper" to handle primitive types as well
* use the new "generate_objectpascal_helper_key" function to generate the key
pparautl.pas:
* insert_self_and_vmt_para: don't insert the $vmt symbol for record or type helpers (ToDo: check whether class helpers really need the symbol as well)
* insert_self_and_vmt_para: pass "self" as var parameter for type helpers as well
psub.pas, generate_bodyentry_block:
* also allow type helpers for constructor methods
ncal.pas, tcallnode.gen_self_tree:
* also use a temp variable for type helper constructors
ncgcal.pas, tcgcallnode.secondcallparan:
* allow Pointers to be passed as address param if it is the Self value of a type helper extending a pointer type
* correctly handle the location in case of type helper constructors
+ add tests
git-svn-id: trunk@23580 -
paramgr.pas, tparamanager:
+ add new method "handle_common_ret_in_param"
* extract common code (safecall + record constructor handling) from "ret_in_param" to "handle_common_ret_in_param" and call the latter in "ret_in_param"
[aarch64,arm,avr,i386,x86_64]/cpupara.pas, tCPUparamanager.ret_in_param:
* call "handle_common_ret_in_param" instead of implementing the same check again and again
ncgcal.pas, tcgcallnode.handle_return_value:
* move the check for (record) constructors to "tparamanager.handle_common_ret_in_param"
git-svn-id: trunk@23520 -
that the type of the parameters can be determined automatically
o added compilerproc declarations for all helpers called in the compiler
via their assembler name, so we can look up the corresponding procdef
git-svn-id: trunk@23325 -
getintparaloc + adapted all call sites of getintparaloc. This
led to a number of additional, related changes:
o corrected the type information for some getintparaloc parameters
o don't allocate some intparalocs in cases they aren't used
o changed "const tvardata" parameter into "constref tvardata" for
fpc_variant_copy_overwrite to make pass-by-reference semantics
explicit
o moved a number of routines that now have to call find_system_type()
from cgobj to hlcgobj so that cgobj doesn't have to start depending
on the symtable unit
o added versions of the cpureg alloc/dealloc methods to hlcgobj that
call through to their cgobj counter parts, so we can call save/restore
the cpu registers before/after calling system helpers from hlcgobj
(not implemented in hlcgobj itself, because all basic register
allocator functionality is still part of cgobj/cgcpu)
git-svn-id: trunk@21696 -
* set tcgpara.def for the function return location (field introduced for and
already used by the JVM code generator, required for future hlcg
functionality)
git-svn-id: trunk@21691 -
o support for the new codepage-aware ansistrings in the jvm branch
o empty ansistrings are now always represented by a nil pointer rather than
by an empty string, because an empty string also has a code page which
can confuse code (although this will make ansistrings harder to use
in Java code)
o more string helpers code shared between the general and jvm rtl
o support for indexbyte/word in the jvm rtl (warning: first parameter
is an open array rather than an untyped parameter there, so
indexchar(pcharvar^,10,0) will be equivalent to
indexchar[pcharvar^],10,0) there, which is different from what is
intended; changing it to an untyped parameter wouldn't help though)
o default() support is not yet complete
o calling fpcres is currently broken due to limitations in
sysutils.executeprocess() regarding handling unix quoting and
the compiler using the same command lines for scripts and directly
calling external programs
o compiling the Java compiler currently requires adding ALLOW_WARNINGS=1
to the make command line
git-svn-id: branches/jvmbackend@20887 -
o the last bytes of records passed by value whose size is not a multiple
of the register size must be passed in the upper (leftmost) bytes of
a register
git-svn-id: trunk@20804 -
* At the same time, allow non-value parameters to be placed into registers even if they have managed type (it is ok because they don't participate in implicit exception handing; explicit exception handling still forces them to memory due to logic in tabstractvarsym.is_regvar).
+ Added tparavarsym.needs_finalization method to handle this logic in a single place.
+ Added tparamanager.use_stackalloc method to determine if local copies should be allocated on heap.
git-svn-id: trunk@19762 -
