+ RTL support:
o VFP exceptions are disabled by default on Darwin,
because they cause kernel panics on iPhoneOS 2.2.1 at least
o all denormals are truncated to 0 on Darwin, because disabling
that also causes kernel panics on iPhoneOS 2.2.1 (probably
because otherwise denormals can also cause exceptions)
* set softfloat rounding mode correctly for non-wince/darwin/vfp
targets
+ compiler support: only half the number of single precision
registers is available due to limitations of the register
allocator
+ added a number of comments about why the stackframe on ARM is
set up the way it is by the compiler
+ added regtype and subregtype info to regsets, because they're
also used for VFP registers (+ support in assembler reader)
+ various generic support routines for dealing with floating point
values located in integer registers that have to be transferred to
mm registers (needed for VFP)
* renamed use_sse() to use_vectorfpu() and also use it for
ARM/vfp support
o only superficially tested for Linux (compiler compiled with -Cpvfpv6
-Cfvfpv2 works on a Cortex-A8, no testsuite run performed -- at least
the fpu exception handler still needs to be implemented), Darwin has
been tested more thoroughly
+ added ARMv6 cpu type and made it default for Darwin/ARM
+ ARMv6+ implementations of atomic operations using ldrex/strex
* don't use r9 on Darwin/ARM, as it's reserved under certain
circumstances (don't know yet which ones)
* changed C-test object files for ARM/Darwin to ARMv6 versions
* check in assembler reader that regsets are not empty, because
instructions with a regset operand have undefined behaviour in that
case
* fixed resultdef of tarmtypeconvnode.first_int_to_real in case of
int64->single type conversion
* fixed constant pool locations in case 64 bit constants are generated,
and/or when vfp instructions with limited reach are present
WARNING: when using VFP on an ARMv6 or later cpu, you *must* compile all
code with -Cparmv6 (or higher), or you will get crashes. The reason is
that storing/restoring multiple VFP registers must happen using
different instructions on pre/post-ARMv6.
git-svn-id: trunk@14317 -
-- Zusammenführen der Unterschiede zwischen Projektarchiv-URLs in ».«:
U rtl/arm/setjump.inc
A rtl/arm/thumb2.inc
U rtl/arm/divide.inc
A rtl/embedded/arm/stm32f103.pp
U rtl/inc/system.inc
U compiler/alpha/cgcpu.pas
U compiler/sparc/cgcpu.pas
U compiler/i386/cgcpu.pas
U compiler/ncgld.pas
U compiler/powerpc/cgcpu.pas
U compiler/avr/cgcpu.pas
U compiler/aggas.pas
U compiler/powerpc64/cgcpu.pas
U compiler/x86_64/cgcpu.pas
U compiler/cgobj.pas
U compiler/psystem.pas
U compiler/aasmtai.pas
U compiler/m68k/cgcpu.pas
U compiler/ncgutil.pas
U compiler/rautils.pas
U compiler/arm/raarmgas.pas
U compiler/arm/armatts.inc
U compiler/arm/cgcpu.pas
U compiler/arm/armins.dat
U compiler/arm/rgcpu.pas
U compiler/arm/cpubase.pas
U compiler/arm/agarmgas.pas
U compiler/arm/cpuinfo.pas
U compiler/arm/armop.inc
U compiler/arm/narmadd.pas
U compiler/arm/aoptcpu.pas
U compiler/arm/armatt.inc
U compiler/arm/aasmcpu.pas
U compiler/systems/t_embed.pas
U compiler/psub.pas
U compiler/options.pas
git-svn-id: trunk@13801 -
* left old cpu-specific set helper code under ifdef FPC_OLD_BIGENDIAN_SETS
in case someone wants to write new assembler set helpers (although most
of them should be optimally generated by the compiler already if
http://wiki.freepascal.org/FPC_HowToDo#Bit.28field.29_getting.2Fsetting_primitives
are optimally implemented)
git-svn-id: trunk@13582 -
only the last source file specified will be compiled, not the first one
* also print out both the old and the new source file name to be compiled
when showing that message (to more easily find where the error is)
* give an error if an unknown parameter is used, instead of silently
ignoring it
git-svn-id: trunk@13429 -
work correctly with DWARF)
* only force the internal linker for STABS when generating relocatable
output (rather than for all debugging formats)
git-svn-id: trunk@12917 -
* switch to external assembler when using dwarf debug info for win32,
because the internal assembler doesn't work with
tf_dwarf_relative_addresses
(mantis #12872)
git-svn-id: trunk@12592 -
svn+ssh://jonas@svn.freepascal.org/FPC/svn/fpc/branches/wpo
........
r11878 | jonas | 2008-10-11 02:25:18 +0200 (Sat, 11 Oct 2008) | 19 lines
+ initial implementation of whole-program optimisation framework
+ implementation of whole-program devirtualisation
o use:
a) generate whole-program optimisation information (no need
to completely compile the program and all of its units
with -OW/-FW, only the main program is sufficient)
fpc -OWdevirtcalls -FWmyprog.wpo myprog
b) use it to optimise the program
fpc -B -Owdevirtcalls -Fwmyprog.wpo myprog
(the -B is not required, but only sources recompiled during
the second pass will actually be optimised -- if you want,
you can even rebuild the rtl devirtualised for a particular
program; and these options can obviously also be used
together with regular optimisation switches)
o warning:
- there are no checks yet to ensure that you do not use
units optimised for a particular program with another
program (or with a changed version of the same program)
........
r11881 | jonas | 2008-10-11 19:35:52 +0200 (Sat, 11 Oct 2008) | 13 lines
* extracted code to detect constructed class/object types from
tcallnode.gen_vmt_tree into its own method to avoid clutter
* detect x.classtype.create constructs (with classtype = the
system.tobject.classtype method), and treat them as if a
"class of x" has been instantiated rather than a
"class of tobject". this required storing the instantiated
classrefs in their own array though, because at such a
point we don't have a "class of x" tdef available (so
now "x", and all other defs instantiated via a classref,
are now stored as tobjectdefs in a separate array)
+ support for devirtualising class methods (including
constructors)
........
r11882 | jonas | 2008-10-11 20:44:02 +0200 (Sat, 11 Oct 2008) | 7 lines
+ -Owoptvmts whole program optimisation which replaces vmt entries
with method names of child classes in case the current class'
method can never be called (e.g., because this class is never
instantiated). As a result, such methods can then be removed
by dead code removal/smart linking (not much effect for either
the compiler, lazarus or a trivial lazarus app though).
........
r11889 | jonas | 2008-10-12 14:29:54 +0200 (Sun, 12 Oct 2008) | 2 lines
* some comment fixes
........
r11891 | jonas | 2008-10-12 18:49:13 +0200 (Sun, 12 Oct 2008) | 4 lines
* fixed twpofilereader.getnextnoncommentline() when reusing a previously
read line
* fixed skipping of unnecessary wpo feedback file sections
........
r11892 | jonas | 2008-10-12 23:42:43 +0200 (Sun, 12 Oct 2008) | 31 lines
+ symbol liveness wpo information extracted from smartlinked programs
(-OW/-Owsymbolliveness)
+ use symbol liveness information to improve devirtualisation (don't
consider classes created in code that has been dead code stripped).
This requires at least two passes of using wpo (first uses dead code
info to locate classes that are constructed only in dead code,
second pass uses this info to potentially further devirtualise).
I.e.:
1) generate initial liveness and devirtualisation feedback
fpc -FWtt.wpo -OWall tt.pp -Xs- -CX -XX
2) use previously generated feedback, and regenerate new feedback
based on this (i.e., disregard classes created in dead code)
fpc -FWtt-1.wpo -OWall -Fwtt.wo -Owall tt.pp -Xs- -CX -XX
3) use the newly generated feedback (in theory, it is possible
that even more opportunities pop up afterwards; you can
continue until the program does not get smaller anymore)
fpc -Fwtt-1.wpo -Owall tt.pp -CX -XX
* changed all message() to cgmessage() calls so the set codegenerror
* changed static fsectionhandlers field to a regular field called
fwpocomponents
* changed registration of wpocomponents: no longer happens in the
initialization section of their unit, but in the InitWpo routine
(which has been moved from the woinfo to the wpo unit). This way
you can register different classes based on the target/parameters.
+ added static method to twpocomponentbase for checking whether
the command line parameters don't conflict with the requested
optimisations (e.g. generating liveness info requires that
smartlinking is turned on)
+ added static method to twpocomponentbase to request the
section name
........
r11893 | jonas | 2008-10-12 23:53:57 +0200 (Sun, 12 Oct 2008) | 3 lines
* fixed comment error (twpodeadcodeinfo keeps a list of live,
not dead symbols)
........
r11895 | jonas | 2008-10-13 00:13:59 +0200 (Mon, 13 Oct 2008) | 2 lines
+ documented -OW<x>, -Ow<x>, -FW<x> and -Fw<x> wpo parameters
........
r11899 | jonas | 2008-10-14 22:14:56 +0200 (Tue, 14 Oct 2008) | 2 lines
* replaced hardcoded string with objdumpsearchstr constant
........
r11900 | jonas | 2008-10-14 22:15:25 +0200 (Tue, 14 Oct 2008) | 2 lines
* reset wpofeedbackinput and wpofeedbackoutput in wpodone
........
r11901 | jonas | 2008-10-14 22:16:07 +0200 (Tue, 14 Oct 2008) | 2 lines
* various additional comments and comment fixes
........
r11902 | jonas | 2008-10-15 18:09:42 +0200 (Wed, 15 Oct 2008) | 5 lines
* store vmt procdefs in the ppu files so we don't have to use a hack to
regenerate them for whole-program optimisation
* fixed crash when performing devirtualisation optimisation on programs
that do not construct any classes/objects with optimisable vmts
........
r11935 | jonas | 2008-10-19 12:24:26 +0200 (Sun, 19 Oct 2008) | 4 lines
* set the vmt entries of non-class virtual methods of not instantiated
objects/classes to FPC_ABSTRACTERROR so the code they refer to can
be thrown away if it is not referred to in any other way either
........
r11938 | jonas | 2008-10-19 20:55:02 +0200 (Sun, 19 Oct 2008) | 7 lines
* record all classrefdefs/objdefs for which a loadvmtaddrnode is generated,
and instead of marking all classes that derive from instantiated
classrefdefs as instantiated, only mark those classes from the above
collection that derive from instantiated classrefdefs as
instantiated (since to instantiate a class, you have to load its vmt
somehow -- this may be broken by using assembler code though)
........
r12212 | jonas | 2008-11-23 12:26:34 +0100 (Sun, 23 Nov 2008) | 3 lines
* fixed to work with the new vmtentries that are always available and
removed previously added code to save/load vmtentries to ppu files
........
r12304 | jonas | 2008-12-05 22:23:30 +0100 (Fri, 05 Dec 2008) | 4 lines
* check whether the correct wpo feedback file is used in the current
compilation when using units that were compiled using wpo information
during a previous compilation run
........
r12308 | jonas | 2008-12-06 18:03:39 +0100 (Sat, 06 Dec 2008) | 2 lines
* abort compilation if an error occurred during wpo initialisation
........
r12309 | jonas | 2008-12-06 18:04:28 +0100 (Sat, 06 Dec 2008) | 3 lines
* give an error message instead of crashing with an io exception if the
compiler is unable to create the wpo feedback file specified using -FW
........
r12310 | jonas | 2008-12-06 18:12:43 +0100 (Sat, 06 Dec 2008) | 3 lines
* don't let the used wpo feedback file influence the interface crc (there's
a separate check for such changes)
........
r12316 | jonas | 2008-12-08 19:08:25 +0100 (Mon, 08 Dec 2008) | 3 lines
* document the format of the sections of the wpo feedback file inside the
feedback file itself
........
r12330 | jonas | 2008-12-10 22:26:47 +0100 (Wed, 10 Dec 2008) | 2 lines
* use sysutils instead of dos to avoid command line length limits
........
r12331 | jonas | 2008-12-10 22:31:11 +0100 (Wed, 10 Dec 2008) | 3 lines
+ support for testing whole program optimisation tests (multiple
compilations using successively generated feedback files)
........
r12332 | jonas | 2008-12-10 22:31:40 +0100 (Wed, 10 Dec 2008) | 2 lines
+ whole program optimisation tests
........
r12334 | jonas | 2008-12-10 22:38:07 +0100 (Wed, 10 Dec 2008) | 2 lines
- removed unused local variable
........
r12339 | jonas | 2008-12-11 18:06:36 +0100 (Thu, 11 Dec 2008) | 2 lines
+ comments for newly added fields to tobjectdef for devirtualisation
........
r12340 | jonas | 2008-12-11 18:10:01 +0100 (Thu, 11 Dec 2008) | 2 lines
* increase ppu version (was no longer different from trunk due to merging)
........
git-svn-id: trunk@12341 -
release and patch level are always two digits so the version can
be compared numerically: so 2.2.2 results in 20202, resolves#11568
git-svn-id: trunk@11504 -
