fpc/compiler/msg/errorheu.msg
2025-01-10 22:47:03 +01:00

3859 lines
253 KiB
Plaintext
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

%%% Reordering of errorheu.msg respective to errore.msg
%%% Contains all comments from errorheu.msg
#
# This file is part of the Free Pascal Compiler
# Copyright (c) 1999-2018 by the Free Pascal Development team
#
# Hebrew (UTF8) language file for Free Pascal Compiler
# Contributed by Ido Kanner <idokan at gmail.com> and Dotan Kamber <kamberd at yahoo.com>
# Based on errore.msg of SVN revision 8988
#
# See the file COPYING.v2, included in this distribution,
# for details about the copyright.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
#
# CodePage 65001
#
# The constants are build in the following order:
# <part>_<type>_<txtidentifier>
#
# <part> is the part of the compiler the message is used
# asmr_ assembler parsing
# asmw_ assembler writing/binary writers
# unit_ unit handling
# scan_ scanner
# parser_ parser
# type_ type checking
# general_ general info
# exec_ calls to assembler, linker, binder
#
# <type> the type of the message it should normally used for
# f_ fatal error
# e_ error
# w_ warning
# n_ note
# h_ hint
# i_ info
# l_ add linenumber
# u_ used
# t_ tried
# c_ conditional
# d_ debug message
# x_ executable informations
#
#
# General
#
# 01023 is the last used one
#
# BeginOfTeX
% \section{General compiler messages}
% This section gives the compiler messages which are not fatal, but which
% display useful information. The number of such messages can be
% controlled with the various verbosity level \var{-v} switches.
% \begin{description}
general_t_compilername=01000_T_מהדר: $1
% When the \var{-vt} switch is used, this line tells you what compiler
% is used.
general_d_sourceos=01001_D_מערכת הפעלה: $1
% When the \var{-vd} switch is used, this line tells you what the source
% operating system is.
general_i_targetos=01002_I_מערכת הפעלה מיועדת: $1
% When the \var{-vd} switch is used, this line tells you what the target
% operating system is.
general_t_exepath=01003_T_משתמש בנתיב הרצה: $1
% When the \var{-vt} switch is used, this line tells you where the compiler
% looks for its binaries.
general_t_unitpath=01004_T_משתמש בנתיב היחידות: $1
% When the \var{-vt} switch is used, this line tells you where the compiler
% looks for compiled units. You can set this path with the \var{-Fu}
general_t_includepath=01005_T_משתמש בנתיב המוסף: $1
% When the \var{-vt} switch is used, this line tells you where the compiler
% looks for its include files (files used in \var{\{\$I xxx\}} statements).
% You can set this path with the \var{-I} option.
general_t_librarypath=01006_T_משתמש בנתיב הספריה: $1
% When the \var{-vt} switch is used, this line tells you where the compiler
% looks for the libraries. You can set this path with the \var{-Fl} option.
general_t_objectpath=01007_T_Using object path: $1
% When the \var{-vt} switch is used, this line tells you where the compiler
% looks for object files you link in (files used in \var{\{\$L xxx\}} statements).
% You can set this path with the \var{-Fo} option.
general_i_abslines_compiled=01008_I_$1 שורות הודרו, ב$2 שניות
% When the \var{-vi} switch is used, the compiler reports the number
% of lines compiled, and the time it took to compile them (real time,
% not program time).
general_f_no_memory_left=01009_F_לא נשאר זכרון
% The compiler doesn't have enough memory to compile your program. There are
% several remedies for this:
% \begin{itemize}
% \item If you're using the build option of the compiler, try compiling the
% different units manually.
% \item If you're compiling a huge program, split it up in units, and compile
% these separately.
% \item If the previous two don't work, recompile the compiler with a bigger
% heap (you can use the \var{-Ch} option for this, \seeo{Ch})
% \end{itemize}
general_i_writingresourcefile=01010_I_כותב את קובץ משאבי טבלת המחרוזות: $1
% This message is shown when the compiler writes the Resource String Table
% file containing all the resource strings for a program.
general_e_errorwritingresourcefile=01011_E_כותב את קובץ משאבי טבלת המחרוזות: $1
% This message is shown when the compiler encountered an error when writing
% the Resource String Table file
general_i_fatal=01012_I_שגיאה קריטית:
% Prefix for Fatal Errors
general_i_error=01013_I_שגיאה:
% Prefix for Errors
general_i_warning=01014_I_התראה:
% Prefix for Warnings
general_i_note=01015_I_הערה:
% Prefix for Notes
general_i_hint=01016_I_רמז:
% Prefix for Hints
general_e_path_does_not_exist=01017_E_הנתיב "$1" אינו קיים
% The specified path does not exist.
general_f_compilation_aborted=01018_F_ההידור בוטל
% Compilation was aborted.
general_text_bytes_code=01019_bytes code
% The size of the generated executable code, in bytes.
general_text_bytes_data=01020_bytes data
% The size of the generated program data, in bytes.
general_i_number_of_warnings=01021_I_אזהרות $1 הונפקו
% Total number of warnings issued during compilation.
general_i_number_of_hints=01022_I_הונפקו $1 רמזים
% Total number of hints issued during compilation.
general_i_number_of_notes=01023_I_הונפקו $1 הערות
% Total number of notes issued during compilation.
% \end{description}
#
# Scanner
#
# 02084 is the last used one
#
% \section{Scanner messages.}
% This section lists the messages that the scanner emits. The scanner takes
% care of the lexical structure of the pascal file, i.e. it tries to find
% reserved words, strings, etc. It also takes care of directives and
% conditional compiling handling.
% \begin{description}
general_f_ioerror=01024_F_I/O error: $1
% During compilation an I/O error happened which allows no further compilation.
general_f_oserror=01025_F_Operating system error: $1
% During compilation an operating system error happened which allows no further compilation.
% \end{description}
#
# Scanner
#
# 02098 is the last used one
#
% \section{Scanner messages.}
% This section lists the messages that the scanner emits. The scanner takes
% care of the lexical structure of the pascal file, i.e. it tries to find
% reserved words, strings, etc. It also takes care of directives and
% conditional compilation handling.
% \begin{description}
scan_f_end_of_file=02000_F_סוף קובץ לא צפוי
% this typically happens in one of the following cases :
% \begin{itemize}
% \item The source file ends before the final \var{end.} statement. This
% happens mostly when the \var{begin} and \var{end} statements aren't
% balanced;
% \item An include file ends in the middle of a statement.
% \item A comment was not closed
% \end{itemize}
scan_f_string_exceeds_line=02001_F_מחרוזת גולשת משורה
% There is a missing closing ' in a string, so it occupies
% multiple lines.
scan_f_illegal_char=02002_F_תו לא חוקי "$1" ($2)
% An illegal character was encountered in the input file.
scan_f_syn_expected=02003_F_שגיאת תחביר: מצפה ל "$1" אבל "$2" נמצא
% This indicates that the compiler expected a different token than
% the one you typed. It can occur almost everywhere where you make a
% mistake against the pascal language.
scan_t_start_include_file=02004_TL_מתחיל קריאה של קובץ תוספות $1
% When you provide the \var{-vt} switch, the compiler tells you
% when it starts reading an included file.
scan_w_comment_level=02005_W_רמת הערות $1 נמצאה
% When the \var{-vw} switch is used, then the compiler warns you if
% it finds nested comments. Nested comments are not allowed in Turbo Pascal
% and can be a possible source of errors.
scan_n_ignored_switch=02008_N_מתעלם ממתג מהדר "$1"
% With \var{-vn} on, the compiler warns if it ignores a switch
scan_w_illegal_switch=02009_W_מתג מהדר "$1" אינו חוקי
% You included a compiler switch (i.e. \var{\{\$... \}}) which the compiler
% does not recognise
scan_w_switch_is_global=02010_W_מיקום שגוי למתג מהדר גלובלי
% The compiler switch is misplaced, and should be located at
% the start of the unit or program.
scan_e_illegal_char_const=02011_E_תו קבוע לא חוקי
% This happens when you specify a character with its ASCII code, as in
% \var{\#96}, but the number is either illegal, or out of range.
scan_f_cannot_open_input=02012_F_לא ניתן לפתוח את קובץ "$1"
% \fpc cannot find the program or unit source file you specified on the
% command line.
scan_f_cannot_open_includefile=02013_F_לא ניתן לפתוח את קובץ התוספות "$1"
% \fpc cannot find the source file you specified in a \var{\{\$include ..\}}
% statement.
scan_e_illegal_pack_records=02015_E_יישור רשומה לא חוקי מייצג "$1"
% You are specifying the \var{\{\$PACKRECORDS n\} } or \var{\{\$ALIGN n\} }
% with an illegal value for \var{n}. For \$PACKRECORDS valid alignments are 1, 2, 4, 8, 16, 32, C,
% NORMAL, DEFAULT, and for \$ALIGN valid alignment are 1, 2, 4, 8, 16, 32, ON,
% OFF. Under mode MacPas \$ALIGN also supports MAC68K, POWER and RESET.
scan_e_illegal_pack_enum=02016_E_מספר מינימלי של מנייה המייצג "$1" אינו חוקי
% You are specifying the \var{\{\$PACKENUM n\}} with an illegal value for
% \var{n}. Only 1,2,4, NORMAL or DEFAULT are valid here.
scan_e_endif_expected=02017_E_מצפה ל$ENDIF בהגדרה $1 $2 הנמצאת ב$3 שורה $4
% Your conditional compilation statements are unbalanced.
scan_e_preproc_syntax_error=02018_E_שגיאת תחביר בעת ניתוח משפט תנאי
% There is an error in the expression following the \var{\{\$if ..\}}, $ifc or $setc compiler
% directives.
scan_e_error_in_preproc_expr=02019_E_הערכת משפט תנאי
% There is an error in the expression following the \var{\{\$if ..\}}, $ifc or $setc compiler
% directives.
scan_w_macro_cut_after_255_chars=02020_W_תוכן המקרו מוגבל לאורך של 255 תווים
% The contents of macros cannot be longer than 255 characters.
scan_e_endif_without_if=02021_E_ENDIF ללא IF(N)DEF
% Your \var{\{\$IFDEF ..\}} and {\{\$ENDIF\}} statements aren't balanced.
scan_f_user_defined=02022_F_הגדרת משתמש: $1
% A user defined fatal error occurred. see also the \progref
scan_e_user_defined=02023_E_הגדרת משתמש: $1
% A user defined error occurred. see also the \progref
scan_w_user_defined=02024_W_הגדרת משתמש: $1
% A user defined warning occurred. see also the \progref
scan_n_user_defined=02025_N_הגדרת משתמש: $1
% A user defined note was encountered. see also the \progref
scan_h_user_defined=02026_H_הגדרת משתמש: $1
% A user defined hint was encountered. see also the \progref
scan_i_user_defined=02027_I_הגדרת משתמש: $1
% User defined information was encountered. see also the \progref
scan_e_keyword_cant_be_a_macro=02028_E_מילת מפתח המוגדרת מחדש כמקרו אינה מכילה השפעה
% You cannot redefine keywords with macros.
scan_f_macro_buffer_overflow=02029_F_גלישת מאגר מקרו בעת קריאה או הרחבה של מקרו
% Your macro or its result was too long for the compiler.
scan_w_macro_too_deep=02030_W_הרחבת מקרו גולשת מעומק של 16.
% When expanding a macro, macros have been nested to a level of 16.
% The compiler will expand no further, since this may be a sign that
% recursion is used.
scan_w_wrong_styled_switch=02031_W_ מתגי פעולת מהדר אינם נתמכים בהערות מסוג //
% Compiler switches should be in normal pascal style comments.
scan_d_handling_switch=02032_DL_מטפל במתג "$1"
% When you set debugging info on (\var{-vd}) the compiler tells you when it
% is evaluating conditional compile statements.
scan_c_endif_found=02033_CL_נמצא ENDIF $1
% When you turn on conditional messages(\var{-vc}), the compiler tells you
% where it encounters conditional statements.
scan_c_ifdef_found=02034_CL_נמצא IFDEF $1, $2
% When you turn on conditional messages(\var{-vc}), the compiler tells you
% where it encounters conditional statements.
scan_c_ifopt_found=02035_CL_נמצא IFOPT $1, $2
% When you turn on conditional messages(\var{-vc}), the compiler tells you
% where it encounters conditional statements.
scan_c_if_found=02036_CL_נמצא IF $1, $2
% When you turn on conditional messages(\var{-vc}), the compiler tells you
% where it encounters conditional statements.
scan_c_ifndef_found=02037_CL_נמצא IFNDEF $1, $2
% When you turn on conditional messages(\var{-vc}), the compiler tells you
% where it encounters conditional statements.
scan_c_else_found=02038_CL_נמצא ELSE $1, $2
% When you turn on conditional messages(\var{-vc}), the compiler tells you
% where it encounters conditional statements.
scan_c_skipping_until=02039_CL_מדלג...
% When you turn on conditional messages(\var{-vc}), the compiler tells you
% where it encounters conditional statements, and whether it is skipping or
% compiling parts.
scan_i_press_enter=02040_I_לחץ על <return> להמשיך
% When the \var{-vi} switch is used, the compiler stops compilation
% and waits for the \var{Enter} key to be pressed when it encounters
% a \var{\{\$STOP\}} directive.
scan_w_unsupported_switch=02041_W_מתג "$1" אינו נתמך
% When warnings are turned on (\var{-vw}) the compiler warns you about
% unsupported switches. This means that the switch is used in Delphi or
% Turbo Pascal, but not in \fpc
scan_w_illegal_directive=02042_W_הוראת המהדר "$1" אינה חוקית
% When warings are turned on (\var{-vw}) the compiler warns you about
% unrecognised switches. For a list of recognised switches, \progref
scan_t_back_in=02043_TL_חזרה ב$1
% When you use (\var{-vt}) the compiler tells you when it has finished
% reading an include file.
scan_w_unsupported_app_type=02044_W_אין תמיכה לסוג האפליקציה: "$1"
% You get this warning, if you specify an unknown application type
% with the directive \var{\{\$APPTYPE\}}
scan_w_app_type_not_support=02045_W_APPTYPE אינו נתמך ע"י ההמערכת הפעלה המבוקשת
% The \var{\{\$APPTYPE\}} directive is supported by certain operating systems only.
scan_w_description_not_support=02046_W_DESCRIPTION אינו נתמך ע"י מערכת ההפעלה המבוקשת
% The \var{\{\$DESCRIPTION\}} directive is not supported on this target OS
scan_n_version_not_support=02047_N_VERSION אינו נתמך ע"י מערכת הפעלה המבוקשת
% The \var{\{\$VERSION\}} directive is not supported on this target OS
scan_n_only_exe_version=02048_N_VERSION רק לקבצי exe או DLL
% The \var{\{\$VERSION\}} directive is only used for executable or DLL sources.
scan_w_wrong_version_ignored=02049_W_פורמט שגוי להוראת VERSION: "$1"
% The \var{\{\$VERSION\}} directive format is majorversion.minorversion
% where majorversion and minorversion are words.
scan_e_illegal_asmmode_specifier=02050_E_סגנון האסמבלר שצויין "$1" אינו חוקי
% When you specify an assembler mode with the \var{\{\$ASMMODE xxx\}}
% the compiler didn't recognize the mode you specified.
scan_w_no_asm_reader_switch_inside_asm=02051_W_מתג קורא הASM אינו אפשרי בתוך משפט אסמבלי. "$1" יהיה ישפיע רק בהכרזה הבאה/
% It is not possible to switch from one assembler reader to another
% inside an assembler block. The new reader will be used for next
% assembler statements only.
scan_e_wrong_switch_toggle=02052_E_שימוש שגוי במתג. השתמש בON/OFF או ב +/-
% You need to use ON or OFF or a + or - to toggle the switch
scan_e_resourcefiles_not_supported=02053_E_קובץ המשאבים אינו נתמך ביעד הנבחר
% The target you are compiling for doesn't support resource files.
scan_w_include_env_not_found=02054_W_משתנה הסביבה "$1" לא נמצא בסביבה
% The included environment variable can't be found in the environment, it will
% be replaced by an empty string instead.
scan_e_invalid_maxfpureg_value=02055_E_ערך לא חוקי להגבלות אוגר הFPC
% Valid values for this directive are 0..8 and NORMAL/DEFAULT
scan_w_only_one_resourcefile_supported=02056_W_רק קובץ משאבים אחד נתמך ביעד זה
% The target you are compiling for supports only one resource file.
% The first resource file found is used, the others are discarded.
scan_w_macro_support_turned_off=02057_W_התמיכה במקרו כובה
% A macro declaration has been found, but macro support is currently off,
% so the declaration will be ignored. To turn macro support on compile with
% -Sm on the commandline or add \{\$MACRO ON\} in the source
scan_e_invalid_interface_type=02058_E_הוכרז סוג ממשק לא חוקי. הגדרות חוקיות הם COM, CORBA או DEFAULT
% The interface type that was specified is not supported
scan_w_appid_not_support=02059_W_APPID נתמך רק בPALMOS
% The \var{\{\$APPID\}} directive is only supported for the PalmOS target.
scan_w_appname_not_support=02060_W_APPNAME נתמך רק בPALMOS
% The \var{\{\$APPNAME\}} directive is only supported for the PalmOS target.
scan_e_string_exceeds_255_chars=02061_E_מחרוזת קבועה לא יכולה להיות מעל 255 תווים
% A single string constant can contain at most 255 chars. Try splitting up the
% string in multiple smaller parts and concatenate them with a + operator.
scan_f_include_deep_ten=02062_F_הוספת קבצי הinclude גלש מעומק ה16
% When including include files the files have been nested to a level of 16.
% The compiler will expand no further, since this may be a sign that
% recursion is used.
scan_e_too_many_push=02063_F_יותר מידי שכבות PUSH
% A maximum of 20 levels is allowed. This error occurs only in mode MacPas.
scan_e_too_many_pop=02064_E_POP ללא שחרור של PUSH
% This error occurs only in mode MacPas.
scan_e_error_macro_lacks_value=02065_E_מקרו "$1" לא מכיל ערכים
% Thus the conditional compile time expression cannot be evaluated.
scan_e_wrong_switch_toggle_default=02066_E_שימוש במתג שגוי, השתמש ב ON/OFF/DEFAULT או ב+/-/*
% You need to use ON or OFF or DEFAULT or a + or - or * to toggle the switch
scan_e_mode_switch_not_allowed=02067_E_מצב מתג "$1" לא מורשה
% A mode switch has already been encountered, or, in case of option -Mmacpas,
% a mode switch occur after UNIT.
scan_e_error_macro_undefined=02068_E_משתנה זמן הידור "$1" לא הוגדר.
% Thus the conditional compile time expression cannot be evaluated. Only in mode MacPas.
scan_e_utf8_bigger_than_65535=02069_E_נמצא קוד UTF-8 גבוהה יותר מ65535
% \fpc handles utf-8 strings internally as widestrings e.g. the char codes are limited to 65535
scan_e_utf8_malformed=02070_E_מחרוזת UTF-8 תקולה
% The given string isn't a valid UTF-8 string
scan_c_switching_to_utf8=02071_C_UTF-8 signature found, using UTF-8 encoding
% The compiler found an UTF-8 encoding signature (\$ef, \$bb, \$bf) at the beginning of a file,
% so it interprets it as an UTF-8 file
scan_e_compile_time_typeerror=02072_E_ביטוי בזמן הידור: נדרש $1 אבל התקבל $2 ב$3
% Type check of a compile time expression failed.
scan_n_app_type_not_support=02073_N_APPTYPE לא נתמך במערכת ההפעלה המבוקשת
% The \var{\{\$APPTYPE\}} directive is supported by certain operating systems only.
scan_e_illegal_optimization_specifier=02074_E_סופק מיטוב לא חוקי "$1"
% When you specify an optimization with the \var{\{\$OPTIMIZATION xxx\}}
% the compiler didn't recognize the optimization you specified.
scan_w_setpeflags_not_support=02075_W_SETPEFLAGS אינו נתמך במערכת ההפעלה המבוקשת
% The \var{\{\$SETPEFLAGS\}} directive is not supported by the target OS
scan_w_imagebase_not_support=02076_W_IMAGEBASE אינו נתמך על ידי מערכת ההפעלה המבוקשת
% The \var{\{\$IMAGEBASE\}} directive is not supported by the target OS
scan_w_minstacksize_not_support=02077_W_MINSTACKSIZE אינו נתמך על ידי מערכת ההפעלה המבוקשת
% The \var{\{\$MINSTACKSIZE\}} directive is not supported by the target OS
scan_w_maxstacksize_not_support=02078_W_MAXSTACKSIZE אינו נתמך על ידי מערכת ההפעלה המבוקשת
% The \var{\{\$MAXSTACKSIZE\}} directive is not supported by the target OS
scanner_e_illegal_warn_state=02079_E_שימוש לא חוקי בהנחית $WARN
% Only ON and OFF can be used as state with a \$warn compiler directive
scan_e_only_packset=02080_E_ערך של אריזה לא חוקי
% Only 0, 1, 2, 4, 8, DEFAULT and NORMAL are allowed as packset parameter
scan_w_pic_ignored=02081_W_מתעלם מהוראת PIC
% Several targets like windows do not support neither need PIC so the PIC directive and switch are
% ignored.
scan_w_unsupported_switch_by_target=02082_W_המתג "$1" אינו נתמך בסוג תוצאה שנבחר
% Some compiler switches like \$E are not supported by all targets.
scan_w_frameworks_darwin_only=02084_W_אפשרויות מבוססות מסגרת נתמכות רק עבור Darwin/Mac OS X
% Frameworks are not a known concept, or at least not supported by FPC, on operating systems other than Darwin/Mac OS X.
scan_e_illegal_minfpconstprec=02085_E_דיוק הערך הקבוע של הנקודה העשרונית המינימלית "$1" אינו חוקי
% Valid minimal precisions for floating point constants are default, 32 and 64, which mean respectively minimal (usually 32 bit), 32 bit and 64 bit precision.
% \end{description}
#
# Parser
#
# 03192 is the last used one
#
% \section{Parser messages}
% This section lists all parser messages. The parser takes care of the
% semantics of you language, i.e. it determines if your pascal constructs
% are correct.
% \begin{description}
scan_w_multiple_main_name_overrides=02086_W_Overriding name of "main" procedure multiple times, was previously set to "$1"
% The name for the main entry procedure is specified more than once. Only the last
% name will be used.
scanner_w_illegal_warn_identifier=02087_W_Illegal identifier "$1" for $WARN directive
% Identifier is not known by a \var{\{\$WARN\}} compiler directive.
scanner_e_illegal_alignment_directive=02088_E_Illegal alignment directive
% The alignment directive is not valid. Either the alignment type is not known or the alignment
% value is not a power of two.
scanner_f_illegal_utf8_bom=02089_F_It is not possible to include a file that starts with an UTF-8 BOM in a module that uses a different code page
% All source code that is part of a single compilation entity (program, library, unit) must be encoded
% in the same code page
scanner_w_directive_ignored_on_target=02090_W_Directive "$1" is ignored for the current target platform
% Some directives are ignored for certain targets, such as changing the
% packrecords and packenum settings on managed platforms.
scan_w_unavailable_system_codepage=02091_W_Current system codepage "$1" is not available for the compiler. Switching default codepage back to "$2".
% The current system codepage is not known by the compiler.
% The compiler is compiled with support for several codepages built-in.
% The codepage of the operation system is not in that list. You will need to recompile
% the compiler with support for this codepage.
scan_w_setpeoptflags_not_support=02092_W_SETPEOPTFLAGS is not supported by the target OS
% The \var{\{\$SETPEOPTFLAGS\}} directive is not supported by the target OS.
scan_e_illegal_peflag=02093_E_Illegal argument for SETPEFLAGS
% The given argument for SETPEFLAGS is neither a correct named value nor an
% ordinal value
scan_e_illegal_peoptflag=02094_E_Illegal argument for SETPEOPTFLAGS
% The given argument for SETPEOPTFLAGS is neither a correct named value nor an
% ordinal value
scan_e_unsupported_switch=02095_E_Directive $1 is not supported on this target
% Not all compiler directives are supported on all targets.
scan_w_invalid_stacksize=02096_W_The specified stack size is not within the valid range for the platform. Setting the stack size ignored.
% The valid range for the stack size is 1024 - 67107839 on 32-bit and 64-bit
% platforms and 1024 - 65520 on 16-bit platforms. Additionally, for Turbo Pascal 7
% compatibility reasons, specifying a stack size of 65521 on 16-bit platforms
% actually sets the stack size to 65520.
scan_w_heapmax_lessthan_heapmin=02097_W_The specified HeapMax value is smaller than the HeapMin value. Setting HeapMax ignored.
% The HeapMax value (if specified) must be greater than or equal to the HeapMin
% value. Otherwise, the HeapMax value is ignored.
scan_e_illegal_hugepointernormalization=02098_E_Illegal argument for HUGEPOINTERNORMALIZATION
% The only allowed values for HUGEPOINTERNORMALIZATION are BORLANDC, MICROSOFTC
% and WATCOMC.
% \end{description}
#
# Parser
#
# 03339 is the last used one
#
% \section{Parser messages}
% This section lists all parser messages. The parser takes care of the
% semantics of you language, i.e. it determines if your Pascal constructs
% are correct.
% \begin{description}
parser_e_syntax_error=03000_E_מפרש - שגיאה תחבירית
% An error against the Turbo Pascal language was encountered. This happens
% typically when an illegal character is found in the sources file.
parser_e_dont_nest_interrupt=03004_E_פרוצדורת פסיקה אינה יכולה להיות מקוננת
% An \var{INTERRUPT} procedure must be global.
parser_w_proc_directive_ignored=03005_W_מתעלם מסוג פרוצדורה "$1"
% The specified procedure directive is ignored by FPC programs.
parser_e_no_overload_for_all_procs=03006_E_לא כל ההכזרות של "$1" בעלות הכרזת OVERLOAD
% When you want to use overloading using the \var{OVERLOAD} directive, then
% all declarations need to have \var{OVERLOAD} specified.
parser_e_export_name_double=03008_E_כפילויות בייצוא שם הפונקציה "$1"
% Exported function names inside a specific DLL must all be different
parser_e_export_ordinal_double=03009_E_כפילויות בייצוא אינדקס הפונקציה "$1"
% Exported function names inside a specific DLL must all be different
parser_e_export_invalid_index=03010_E_אינדקס לא תקין לייצוא הפונקציה
% DLL function index must be in the range \var{1..\$FFFF}
parser_w_parser_reloc_no_debug=03011_W_שינוי מיקום נתוני הניפוי לא עובדים לקבצי DLL או קבצי הרצה. התבטל.
% It is currently not possible to include debug information in a relocatable DLL.
parser_w_parser_win32_debug_needs_WN=03012_W_לאפשר ניפוי שגיאות לwin32 יש לבטל את שינוי המיקום ע"י האפשרות -WN
% Stabs info is wrong for relocatable DLL or EXES use -WN
% if you want to debug win32 executables.
parser_e_constructorname_must_be_init=03013_E_שם יוצר חייב להיות INIT
% You are declaring an object constructor with a name which is not \var{init}, and the
% \var{-Ss} switch is in effect. See the \var{-Ss} switch (\seeo{Ss}).
parser_e_destructorname_must_be_done=03014_E_שם הורס חייב להיות DONE
% You are declaring an object destructor with a name which is not \var{done}, and the
% \var{-Ss} switch is in effect. See the \var{-Ss} switch (\seeo{Ss}).
parser_e_proc_inline_not_supported=03016_E_פרוצדורת INLINE לא נתמכת
% You tried to compile a program with C++ style inlining, and forgot to
% specify the \var{-Si} option (\seeo{Si}). The compiler doesn't support C++
% styled inlining by default.
parser_w_constructor_should_be_public=03018_W_יוצר צריך להיות ציבורי
% Constructors must be in the 'public' part of an object (class) declaration.
parser_w_destructor_should_be_public=03019_W_הורס צריך להיות ציבורי
% Destructors must be in the 'public' part of an object (class) declaration.
parser_n_only_one_destructor=03020_N_מחלקה צריכה הורס אחד בלבד
% You can declare only one destructor for a class.
parser_e_no_local_objects=03021_E_הגדרות מחלקה מקומיות אינם מורשות
% Classes must be defined globally. They cannot be defined inside a
% procedure or function
parser_f_no_anonym_objects=03022_F_הגדרות מחלקה אנונימיות אינם מורשות
% An invalid object (class) declaration was encountered, i.e. an
% object or class without methods that isn't derived from another object or
% class. For example:
% \begin{verbatim}
% Type o = object
% a : longint;
% end;
% \end{verbatim}
% will trigger this error.
parser_n_object_has_no_vmt=03023_N_האובייקט "$1" ללא VMT
% This is a note indicating that the declared object has no
% virtual method table.
parser_e_illegal_parameter_list=03024_E_רשימת פרמטרים לא חוקית
% You are calling a function with parameters that are of a different type than
% the declared parameters of the function.
parser_e_wrong_parameter_size=03026_E_מספר שגוי של פרמטרים צוין עבור הקריאה ל "$1"
% There is an error in the parameter list of the function or procedure,
% the number of parameters is not correct.
parser_e_overloaded_no_procedure=03027_E_מזהה המרובה שימוש "$1" אינו פונקציה
% The compiler encountered a symbol with the same name as an overloaded
% function, but it is not a function it can overload.
parser_e_overloaded_have_same_parameters=03028_E_פונקציות מרובות שימוש מכילות את אותם רשימת פרמטרים
% You're declaring overloaded functions, but with the same parameter list.
% Overloaded function must have at least 1 different parameter in their
% declaration.
parser_e_header_dont_match_forward=03029_E_הגדרת הפונקציה אינה תואמת את ההגדרה הקודמת "$1"
% You declared a function with same parameters but
% different result type or function modifiers.
parser_e_header_different_var_names=03030_E_הגדרת הפונקציה "$1" אינה תואמת את המימוש: שם משתנה השתנה $2 => $3
% You declared the function in the \var{interface} part, or with the
% \var{forward} directive, but define it with a different parameter list.
parser_n_duplicate_enum=03031_N_ערכים בסוג מניה חייבים להיות בסדר עולה
% \fpc allows enumeration constructions as in C. Given the following
% declaration two declarations:
% \begin{verbatim}
% type a = (A_A,A_B,A_E:=6,A_UAS:=200);
% type a = (A_A,A_B,A_E:=6,A_UAS:=4);
% \end{verbatim}
% The second declaration would produce an error. \var{A\_UAS} needs to have a
% value higher than \var{A\_E}, i.e. at least 7.
parser_e_no_with_for_variable_in_other_segments=03033_E_With אינו מסוגל להשתמש במשתנים ממקטע שונה
% With stores a variable locally on the stack,
% but this is not possible if the variable belongs to another segment.
parser_e_too_much_lexlevel=03034_E_פונקציה מקוננת > 31
% You can nest function definitions only 31 times.
parser_e_range_check_error=03035_E_שגיאה בבדיקת טווח בעת הערכת קבועים
% The constants are out of their allowed range.
parser_w_range_check_error=03036_W_שגיאה בבדיקת טווח בעת הערכת קבועים
% The constants are out of their allowed range.
parser_e_double_caselabel=03037_E_הכזרת תווית כפולה בcase
% You are specifying the same label 2 times in a \var{case} statement.
parser_e_case_lower_less_than_upper_bound=03038_E_הטווח הסופי קטן מהטווח ההתחלתי
% The upper bound of a \var{case} label is less than the lower bound and this
% is useless
parser_e_type_const_not_possible=03039_E_הכרזת טיפוס קבועים של מחלקות או ממשקים אסורה
% You cannot declare a constant of type class or object.
parser_e_no_overloaded_procvars=03040_E_משתנים של פונקציות מרובות שימוש אינם מורשות
% You are trying to assign an overloaded function to a procedural variable.
% This is not allowed
parser_e_invalid_string_size=03041_E_אורך מחרוזת חייב להיות עם ערכים מ1 ל255
% The length of a shortstring in Pascal is limited to 255 characters. You are
% trying to declare a string with length lower than 1 or greater than 255
parser_w_use_extended_syntax_for_objects=03042_W_השתמש בתחביר מורחב של NEW וDISPOSE לעותקים של אובייקט
% If you have a pointer \var{a} to a class type, then the statement
% \var{new(a)} will not initialize the class (i.e. the constructor isn't
% called), although space will be allocated. you should issue the
% \var{new(a,init)} statement. This will allocate space, and call the
% constructor of the object
parser_w_no_new_dispose_on_void_pointers=03043_W_השימוש במצביע לא מוגדר עם NEW ו DISPOSE חסר משמעות
parser_e_no_new_dispose_on_void_pointers=03044_E_בלתי אפשרי להשתמש במצביע לא מוגדר עם NEW או DISPOSE
% You cannot use \var{new(p)} or \var{dispose(p)} if \var{p} is an untyped pointer
% because no size is associated to an untyped pointer.
% Accepted for compatibility in \var{tp} and \var{delphi} modes.
parser_e_class_id_expected=03045_E_מצפה למזהה מחלקה
% This happens when the compiler scans a procedure declaration that contains
% a dot,
% i.e., a object or class method, but the type in front of the dot is not
% a known type.
parser_e_no_type_not_allowed_here=03046_E_סוג מזהה לא מורשה במיקום הנוכחי
% You cannot use a type inside an expression.
parser_e_methode_id_expected=03047_E_מצפה למזהה מתודי
% This identifier is not a method.
% This happens when the compiler scans a procedure declaration that contains
% a dot, i.e., a object or class method, but the procedure name is not a
% procedure of this type.
parser_e_header_dont_match_any_member=03048_E_הגדרת הפונקציה לא זהה למתודות של המחלקה "$1"
% This identifier is not a method.
% This happens when the compiler scans a procedure declaration that contains
% a dot, i.e., a object or class method, but the procedure name is not a
% procedure of this type.
parser_d_procedure_start=03049_DL_פרוצדורה/פונקציה $1
% When using the \var{-vd} switch, the compiler tells you when it starts
% processing a procedure or function implementation.
parser_e_error_in_real=03050_E_קבוע של מספר ממשי אינו חוקי
% The compiler expects a floating point expression, and gets something else.
parser_e_fail_only_in_constructor=03051_E_FAIL יכול להיות בשימוש רק בתוך יוצר
% You are using the \var{fail} keyword outside a constructor method.
parser_e_no_paras_for_destructor=03052_E_הורסים לא יכולים להכיל פרמטרים
% You are declaring a destructor with a parameter list. Destructor methods
% cannot have parameters.
parser_e_only_class_members_via_class_ref=03053_E_Only class methods, class properties and class variables can be referred with class references
% This error occurs in a situation like the following:
% \begin{verbatim}
% Type :
% Tclass = Class of Tobject;
%
% Var C : TClass;
%
% begin
% ...
% C.free
% \end{verbatim}
% \var{Free} is not a class method and hence cannot be called with a class
% reference.
parser_e_only_class_members=03054_E_Only class methods, class properties and class variables can be accessed in class methods
% This is related to the previous error. You cannot call a method of an object
% from inside a class method. The following code would produce this error:
% \begin{verbatim}
% class procedure tobject.x;
%
% begin
% free
% \end{verbatim}
% Because free is a normal method of a class it cannot be called from a class
% method.
parser_e_case_mismatch=03055_E_קבועים וסוג CASE אינם מתאימים
% One of the labels is not of the same type as the case variable.
parser_e_illegal_symbol_exported=03056_E_לא ניתן לייצא את הסמל מספרייה
% You can only export procedures and functions when you write a library. You
% cannot export variables or constants.
parser_w_should_use_override=03057_W_מתודת ירושה נסתרת ע"י "$1"
% A method that is declared \var{virtual} in a parent class, should be
% overridden in the descendent class with the \var{override} directive. If you
% don't specify the \var{override} directive, you will hide the parent method;
% you will not override it.
parser_e_nothing_to_be_overridden=03058_E_אין מתודה במחלקה של האב אשר ניתן לשכתב: "$1"
% You are trying to \var{override} a virtual method of a parent class that does
% not exist.
parser_e_no_procedure_to_access_property=03059_E_לא ניתן מספר לגשת למאפיין
% You specified no \var{read} directive for a property.
parser_w_stored_not_implemented=03060_W_מאפיין שמור אינו מבוצע עדיין
% The \var{stored} directive is not yet implemented
parser_e_ill_property_access_sym=03061_E_סימן לא חוקי לגישת המאפיין
% There is an error in the \var{read} or \var{write} directives for an array
% property. When you declare an array property, you can only access it with
% procedures and functions. The following code would cause such an error.
% \begin{verbatim}
% tmyobject = class
% i : integer;
% property x [i : integer]: integer read I write i;
% \end{verbatim}
%
parser_e_cant_access_protected_member=03062_E_לא ניתן לגשת לשדה מוגן באובייקט הנוכחי
% Fields that are declared in a \var{protected} section of an object or class
% declaration cannot be accessed outside the module where the object is
% defined, or outside descendent object methods.
parser_e_cant_access_private_member=03063_E_לא ניתן לגשת לשדה פרטי באובקייט הנוכחי
% Fields that are declared in a \var{private} section of an object or class
% declaration cannot be accessed outside the module where the class is
% defined.
parser_e_overridden_methods_not_same_ret=03066_E_מתודה מרובת שימוש חייבת להיות זהה בסוג המשתנה: "$2" בשימוש ע"י "$1", אשר מכילה סוג משתנה אחר
% If you declare overridden methods in a class definition, they must
% have the same return type.
parser_e_dont_nest_export=03067_E_הגדדרת פונקציות EXPORT לא יכולות להיות מקוננות
% You cannot declare a function or procedure within a function or procedure
% that was declared as an export procedure.
parser_e_methods_dont_be_export=03068_E_אי אפשר לייצא את המתודה
% You cannot declare a procedure that is a method for an object as
% \var{export}ed.
parser_e_call_by_ref_without_typeconv=03069_E_השימוש בפרמטר של משתנה חייב להיות זהה: מכיל "$1" מצפה ל"$2"
% When calling a function declared with \var{var} parameters, the variables in
% the function call must be of exactly the same type. There is no automatic
% type conversion.
parser_e_no_super_class=03070_E_המחלקה איננה מחלקת אב של המחלקה הנוכחית
% When calling inherited methods, you are trying to call a method of a non-related
% class. You can only call an inherited method of a parent class.
parser_e_self_not_in_method=03071_E_SELF מורשה רק במתודות
% You are trying to use the \var{self} parameter outside an object's method.
% Only methods get passed the \var{self} parameters.
parser_e_generic_methods_only_in_methods=03072_E_מתודות יכולות להיקרא ישירות רק בתוך מתודות אחרות עם סוג מזהה שלהמחלקה
% A construction like \var{sometype.somemethod} is only allowed in a method.
parser_e_illegal_colon_qualifier=03073_E_שימוש לא חוקי של ':'
% You are using the format \var{:} (colon) 2 times on an expression that
% is not a real expression.
parser_e_illegal_set_expr=03074_E_שגיאה בבדיקת טווח בסדרת יוצרים או שכפול סדרה
% The declaration of a set contains an error. Either one of the elements is
% outside the range of the set type, either two of the elements are in fact
% the same.
parser_e_pointer_to_class_expected=03075_E_מצפה למצביע אובייקט
% You specified an illegal type in a \var{new} statement.
% The extended syntax of \var{new} needs an object as a parameter.
parser_e_expr_have_to_be_constructor_call=03076_E_הביטוי חייב להיות קריאת יוצר
% When using the extended syntax of \var{new}, you must specify the constructor
% method of the object you are trying to create. The procedure you specified
% is not a constructor.
parser_e_expr_have_to_be_destructor_call=03077_E_הביטוי חייב להיות קריאת הורס
% When using the extended syntax of \var{dispose}, you must specify the
% destructor method of the object you are trying to dispose of.
% The procedure you specified is not a destructor.
parser_e_invalid_record_const=03078_E_סדר לא חוקי של אלמנטים ברשומה
% When declaring a constant record, you specified the fields in the wrong
% order.
parser_e_false_with_expr=03079_E_סוג ביטוי חייב להיות ביטוי רשומה או מחלקה
% A \var{with} statement needs an argument that is of the type \var{record}
% or \var{class}. You are using \var{with} on an expression that is not of
% this type.
parser_e_void_function=03080_E_פרוצדורה לא יכולה להחזיר ערך
% In \fpc, you can specify a return value for a function when using
% the \var{exit} statement. This error occurs when you try to do this with a
% procedure. Procedures cannot return a value.
parser_e_only_methods_allowed=03081_E_היוצרים וההורסים חייבים להיות מתודיים
% You're declaring a procedure as destructor or constructor, when the
% procedure isn't a class method.
parser_e_operator_not_overloaded=03082_E_האופריטור לא מרובה שימוש
% You're trying to use an overloaded operator when it is not overloaded for
% this type.
parser_e_no_such_assignment=03083_E_לא ניתן להציב ערכים לסוגים מרובי שימוש
% You can not overload assignment for types
% that the compiler considers as equal.
parser_e_overload_impossible=03084_E_בלתי אפשרי להשתמש באופרטור מרובה שימוש
% The combination of operator, arguments and return type are
% incompatible.
parser_e_no_reraise_possible=03085_E_לא ניתן להרים חריגה
% You are trying to raise an exception where it is not allowed. You can only
% raise exceptions in an \var{except} block.
parser_e_no_new_or_dispose_for_classes=03086_E_התחביר המורחב של NEW או DISPOSE לא מורשה למחלקות
% You cannot generate an instance of a class with the extended syntax of
% \var{new}. The constructor must be used for that. For the same reason, you
% cannot call \var{dispose} to de-allocate an instance of a class, the
% destructor must be used for that.
parser_e_procedure_overloading_is_off=03088_E_האפשרות לפרוצדורות מרובות שימוש כבוי
% When using the \var{-So} switch, procedure overloading is switched off.
% Turbo Pascal does not support function overloading.
parser_e_overload_operator_failed=03089_E_לא ניתן להעמיס על סוג האופרטור הנוכחי. העמסת האופרטורים הקשורים לפעולה (אם בכלל) הם: $1
% You are trying to overload an operator which cannot be overloaded.
% The following operators can be overloaded :
% \begin{verbatim}
% +, -, *, /, =, >, <, <=, >=, is, as, in, **, :=
% \end{verbatim}
parser_e_comparative_operator_return_boolean=03090_E_אופרטור השוואתי חייב להחזיר ערך בוליאני
% When overloading the \var{=} operator, the function must return a boolean
% value.
parser_e_only_virtual_methods_abstract=03091_E_רק שיטה ווירטואלית יכולה להיות מופשט
% You are declaring a method as abstract, when it is not declared to be
% virtual.
parser_f_unsupported_feature=03092_F_שימוש באופציה לא נתמכת!
% You're trying to force the compiler into doing something it cannot do yet.
parser_e_mix_of_classes_and_objects=03093_E_הערבוב של עצמים שונים (מחלקות, עצם, ממשק וכו') אינו מורשה
% You cannot derive \var{objects}, \var{classes}, \var{cppclasses} and \var{interfaces} interttwined . E.g.
% a class cannot have an object as parent and vice versa.
parser_w_unknown_proc_directive_ignored=03094_W_מתעלם מהנחית השגרה: "$1"
% The procedure directive you specified is unknown.
parser_e_directive_only_one_var=03095_E_$1 can be associated with only one variable
% You cannot specify more than one variable before the \var{absolute}, \var{export}, \var{external},
% \var{weakexternal}, \var{public} and \var{cvar} directives.
% As a result, for example the following construct will provide this error:
% \begin{verbatim}
% Var Z : Longint;
% X,Y : Longint absolute Z;
% \end{verbatim}
parser_e_absolute_only_to_var_or_const=03096_E_ניתן להשתמש בabsolute רק עם משתנה או קבוע
% The address of a \var{absolute} directive can only point to a variable or
% constant. Therefore, the following code will produce this error:
% \begin{verbatim}
% Procedure X;
%
% var p : longint absolute x;
% \end{verbatim}
%
parser_e_initialized_only_one_var=03097_E_ניתן לאתחל רק משתנה אחד
% You cannot specify more than one variable with a initial value
% in Delphi mode.
parser_e_abstract_no_definition=03098_E_מתודה מופשטת אינה זקוקה להגדרה (עם גוף של פונקציה)
% Abstract methods can only be declared, you cannot implement them. They
% should be overridden by a descendant class.
parser_e_overloaded_must_be_all_global=03099_E_העמסת היתר של הפונקציה אינה יכולה להיות מקומית (חייבת להיות מיוצאת)
% You are defining a overloaded function in the implementation part of a unit,
% but there is no corresponding declaration in the interface part of the unit.
parser_w_virtual_without_constructor=03100_W_שימוש במתודות ווירטואליות ללא יוצר ב "$1"
% If you declare objects or classes that contain virtual methods, you need
% to have a constructor and destructor to initialize them. The compiler
% encountered an object or class with virtual methods that doesn't have
% a constructor/destructor pair.
parser_c_macro_defined=03101_CL_הגדרת מאקרו: $1
% When \var{-vc} is used, the compiler tells you when it defines macros.
parser_c_macro_undefined=03102_CL_מאקרו לא מוגדר: $1
% When \var{-vc} is used, the compiler tells you when it undefines macros.
parser_c_macro_set_to=03103_CL_מאקרו $1 מוגדר כ $2
% When \var{-vc} is used, the compiler tells you what values macros get.
parser_i_compiling=03104_I_מהדר $1
% When you turn on information messages (\var{-vi}), the compiler tells you
% what units it is recompiling.
parser_u_parsing_interface=03105_UL_מפרש את הממשק של היחידה $1
% This tells you that the reading of the interface
% of the current unit starts
parser_u_parsing_implementation=03106_UL_מפרש את הביצוע של $1
% This tells you that the code reading of the implementation
% of the current unit, library or program starts
parser_d_compiling_second_time=03107_DL_מהדר את $1 בפעם השנייה
% When you request debug messages (\var{-vd}) the compiler tells you what
% units it recompiles for the second time.
parser_e_no_property_found_to_override=03109_E_לא נמצאה תכונה לעקיפה
% You want to override a property of a parent class, when there is, in fact,
% no such property in the parent class.
parser_e_only_one_default_property=03110_E_רק תכונה אחת עם ברירת מחדל מורשת
% You specified a property as \var{Default}, but the class already has a
% default property, and a class can have only one default property.
parser_e_property_need_paras=03111_E_התונה עם ברירת מחדל חייבת להיות תכונה של מערך
% Only array properties of classes can be made \var{default} properties.
parser_e_constructor_cannot_be_not_virtual=03112_E_יוצרים ווירטואלים נתמכים רק במחלקה
% You cannot have virtual constructors in objects. You can only have them
% in classes.
parser_e_no_default_property_available=03113_E_ערך ברירת מחדל אינו קיים לתכונה
% You are trying to access a default property of a class, but this class (or one of
% its ancestors) doesn't have a default property.
parser_e_cant_have_published=03114_E_המחלקה אינה יכולה להכיל את חתך published, השתמש במתג {$M+}
% If you want a \var{published} section in a class definition, you must
% use the \var{\{\$M+\}} switch, whch turns on generation of type
% information.
parser_e_forward_declaration_must_be_resolved=03115_E_נדרשת הגדרה ראשונית של המחלקה "$1" לפני השימוש בה כמחלקה יורשת
% To be able to use an object as an ancestor object, it must be defined
% first. This error occurs in the following situation:
% \begin{verbatim}
% Type ParentClas = Class;
% ChildClass = Class(ParentClass)
% ...
% end;
% \end{verbatim}
% Where \var{ParentClass} is declared but not defined.
parser_e_no_local_operator=03116_E_השימוש באופריטור מקומי אינו נתמך
% You cannot overload locally, i.e. inside procedures or function
% definitions.
parser_e_proc_dir_not_allowed_in_interface=03117_E_מקדם שיגרה "$1" אינו מורשה בשימוש בתוך הממשק
% This procedure directive is not allowed in the \var{interface} section of
% a unit. You can only use it in the \var{implementation} section.
parser_e_proc_dir_not_allowed_in_implementation=03118_E_מקדם שיגרה "$1" אינו מורשה בחלק הביצועי
% This procedure directive is not defined in the \var{implementation} section of
% a unit. You can only use it in the \var{interface} section.
parser_e_proc_dir_not_allowed_in_procvar=03119_E_מקדם שיגרה "$1" אינו מורשה כחלק מהגדרת השיגרה
% This procedure directive cannot be part of a procedural or function
% type declaration.
parser_e_function_already_declared_public_forward=03120_E_הגדרת הפונקציה "$1" כבר בוצעה
% You will get this error if a function is defined as \var{forward} twice.
% Or it is once in the \var{interface} section, and once as a \var{forward}
% declaration in the \var{implmentation} section.
parser_e_not_external_and_export=03121_E_לא ניתן להשתמש גם ב EXPORT וגם EXTERNAL
% These two procedure directives are mutually exclusive
parser_n_not_supported_for_inline=03123_N_"$1" אינו נתמך עדיין בתוך פונקצית/שגרת inline
% Inline procedures don't support this declaration.
parser_h_inlining_disabled=03124_H_השימוש הישיר מבוטל
% Inlining of procedures is disabled.
parser_i_writing_browser_log=03125_I_כותב יומן דפדפן $1
% When information messages are on, the compiler warns you when it
% writes the browser log (generated with the \var{\{\$Y+ \}} switch).
parser_h_maybe_deref_caret_missing=03126_H_ייתכן כי חסר תוכן למצביע
% The compiler thinks that a pointer may need a dereference.
parser_f_assembler_reader_not_supported=03127_F_אין תמיכה במאסף הנבחר
% The selected assembler reader (with \var{\{\$ASMMODE xxx\}} is not
% supported. The compiler can be compiled with or without support for a
% particular assembler reader.
parser_e_proc_dir_conflict=03128_E_מקדם השיגרה "$1" מתנגש עם מקדמים אחרים
% You specified a procedure directive that conflicts with other directives.
% for instance \var{cdecl} and \var{pascal} are mutually exclusive.
parser_e_call_convention_dont_match_forward=03129_E_השימוש בהגדרה הנוכחית אינו זהה להגדרה הראשונית
% This error happens when you declare a function or procedure with
% e.g. \var{cdecl;} but omit this directive in the implementation, or vice
% versa. The calling convention is part of the function declaration, and
% must be repeated in the function definition.
parser_e_property_cant_have_a_default_value=03131_E_תכונות אינן יכולות להכיל ערך ברירת מחדל
% Set properties or indexed properties cannot have a default value.
parser_e_property_default_value_must_const=03132_E_ערך ברירת המחדלק שת התכונה חייב להיות קבוע
% The value of a \var{default} declared property must be known at compile
% time. The value you specified is only known at run time. This happens
% .e.g. if you specify a variable name as a default value.
parser_e_cant_publish_that=03133_E_הסמל אינו יכול להיות בשימוש בתוך מחלקה ללא הגדרתו בתוך המחלקה
% Only class type variables can be in a \var{published} section of a class
% if they are not declared as a property.
parser_e_cant_publish_that_property=03134_E_סוג זה של תכונה אינו יכול להיות בשימוש
% Properties in a \var{published} section cannot be array properties.
% they must be moved to public sections. Properties in a \var{published}
% section must be an ordinal type, a real type, strings or sets.
parser_e_empty_import_name=03136_E_נדרש שם ייבוא
% Some targets need a name for the imported procedure or a \var{cdecl} specifier
parser_e_division_by_zero=03138_E_חלוק באפס
% There is a division by zero encounted
parser_e_invalid_float_operation=03139_E_פעולת עשרונית לא חוקית
% An operation on two real type values produced an overflow or a division
% by zero.
parser_e_array_lower_less_than_upper_bound=03140_E_הגבול העליון נמוך יותר מהגבול התחתון
% The upper bound of a an array declaration is less than the lower bound and this
% is not possible
parser_w_string_too_long=03141_W_אורך המחרוזת של "$1" ארוך יותר מ "$1"
% The size of the constant string is larger than the size you specified in
% string type definition
parser_e_string_larger_array=03142_E_אורך המחרוזת ארוך יותר מאורך מערך התווים
% The size of the constant string is larger than the size you specified in
% the array[x..y] of char definition
parser_e_ill_msg_expr=03143_E_התוכן של הביטוי לאחר ההודעה אינו חוקי
% \fpc supports only integer or string values as message constants
parser_e_ill_msg_param=03144_E_טיפול בהודעות חייב להיות במבנה קבוע של פרמטרים
% A method declared with the \var{message}-directive as message handler
% can take only one parameter which must be declared as call by reference
% Parameters are declared as call by reference using the \var{var}-directive
parser_e_duplicate_message_label=03145_E_תווית הודעה כפולה: "$1"
% A label for a message is used twice in one object/class
parser_e_self_in_non_message_handler=03146_E_Self חייב להיות פרמטר במתודה של מטפל ההודעות
% The self parameter can only be passed explicitly to a method which
% is declared as message handler.
parser_e_threadvars_only_sg=03147_E_Threadvars חייבים להיות סטטיים או גלובליים
% Threadvars must be static or global, you can't declare a thread
% local to a procedure. Local variables are always local to a thread,
% because every thread has its own stack and local variables
% are stored on the stack
parser_f_direct_assembler_not_allowed=03148_F_השימוש במאסף הנוכחי אינו תומך בוסג התוצאה הבינארית
% You can't use direct assembler when using a binary writer, choose an
% other outputformat or use another assembler reader
parser_w_no_objpas_use_mode=03149_W_אסור לקרוא ליחידת OBJPAS ישירות, יש להשתמש ב \{\$mode objfpc\} או ב \{\$mode delphi\} במקום
% You are trying to load the ObjPas unit manually from a uses clause. This is
% not a good idea. Use the \var{\{\$mode objfpc\}} or
% \var{\{\$mode delphi\}}
% directives which load the unit automatically
parser_e_no_object_override=03150_E_OVERRIDE אינו יכול להיות בשימוש באובייקטים
% Override is not supported for objects, use \var{virtual} instead to override
% a method of a parent object
parser_e_cant_use_inittable_here=03151_E_טיפוסי נתונים אשר דורשים אתחול או סיכום אינם יכולים להיות ברשומות variant
% Some data type (e.g. \var{ansistring}) needs initialization/finalization
% code which is implicitly generated by the compiler. Such data types
% can't be used in the variant part of a record.
parser_e_resourcestring_only_sg=03152_E_לא ניתן להגדיר Resourcestring בתור הגדרה מקומית, רק הגדרה גלובלית או סטטית
% Resourcestring can not be declared local, only global or using the static
% directive.
parser_e_exit_with_argument_not__possible=03153_E_השימוש בשיגרה exit אינו יכול להתבצע במיקום הנוכחי
% an exit statement with an argument for the return value can't be used here, this
% can happen e.g. in \var{try..except} or \var{try..finally} blocks
parser_e_stored_property_must_be_boolean=03154_E_טיפוס הנתונים בסימול האחסון חייב להיות בוליאני
% If you specify a storage symbol in a property declaration, it must be of
% the type boolean
parser_e_ill_property_storage_sym=03155_E_הסימול אינו יכול להשמש כסימול לאחסון
% You can't use this type of symbol as storage specifier in property
% declaration. You can use only methods with the result type boolean,
% boolean class fields or boolean constants
parser_e_only_publishable_classes_can_be_published=03156_E_רק מחלקה המהודרת במצב $M+ יכולה להיות איזור ה published
% In the published section of a class can be only class as fields used which
% are compiled in \var{\{\$M+\}} or which are derived from such a class. Normally
% such a class should be derived from TPersitent
parser_e_proc_directive_expected=03157_E_מצפה להנחיית שיגרה
% This error is triggered when you have a \var{\{\$Calling\}} directive without
% a calling convention specified.
% It also happens when declaring a procedure in a const block and you
% used a ; after a procedure declaration which must be followed by a
% procedure directive.
% Correct declarations are:
% \begin{verbatim}
% const
% p : procedure;stdcall=nil;
% p : procedure stdcall=nil;
% \end{verbatim}
parser_e_invalid_property_index_value=03158_E_הערך האינדקס של התכונה חייב להיות טיפוס מסודר
% The value you use to index a property must be of an ordinal type, for
% example an integer or enumerated type.
parser_e_procname_to_short_for_export=03159_E_שם השגרה קצר מידי לייצוא
% The length of the procedure/function name must be at least 2 characters
% long. This is because of a bug in dlltool which doesn't parse the .def
% file correct with a name of length 1.
parser_e_dlltool_unit_var_problem=03160_E_לא ניתן לייצר חלק DEFFILE למשתנים גלובליים ביחידה
parser_e_dlltool_unit_var_problem2=03161_E_הדר ללא שימוש ב -WD
% You need to compile this file without the -WD switch on the
% commandline
parser_f_need_objfpc_or_delphi_mode=03162_F_יש להשתמש במצב ObjFpc (-S2) או במצב Delphi (-Sd) להדר את המודול
% You need to use \{\$mode objfpc\} or \{\$mode delphi\} to compile this file.
% Or use the equivalent commandline switches -S2 or -Sd.
parser_e_no_export_with_index_for_target=03163_E_אי אפשר לייצא עם אינדקס תחת $1
% Exporting of functions or procedures with a specified index is not
% supported on this target.
parser_e_no_export_of_variables_for_target=03164_E_ייצוא של משתמש אינו נתמך ב$1
% Exporting of variables is not supported on this target.
parser_e_improper_guid_syntax=03165_E_תחביר GUID אינו חוקי
% The GUID indication does not have the proper syntax. It should be of the form
% \begin{verbatim}
% {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}
% \end{verbatim}
% Where each \var{X} represents a hexadecimal digit.
parser_w_interface_mapping_notfound=03168_W_השגרה "$1" נמצאה אך ללא הפרמטרים המבוקשים של $2.$3
% The compiler cannot find a suitable procedure which implements the given method of an interface.
% A procedure with the same name is found, but the arguments do not match.
parser_e_interface_id_expected=03169_E_מצפה למזהה ממשק
% This happens when the compiler scans a \var{class} declaration that contains
% \var{interface} function name mapping code like this:
% \begin{verbatim}
% type
% TMyObject = class(TObject, IDispatch)
% function IUnknown.QueryInterface=MyQueryInterface;
% ....
% \end{verbatim}
% and the \var{interface} before the dot not listed in the inheritance list.
parser_e_type_cant_be_used_in_array_index=03170_E_הסוג "$1" אינו יכול להיות בשימוש בתור סוג אינדקס למערך
% Types like \var{qword} or \var{int64} aren't allowed as array index type
parser_e_no_con_des_in_interfaces=03171_E_יוצר והורס אינם מורשים בממשקים
% Constructor and destructor declarations aren't allowed in interface
% In the most cases the method \var{QueryInterface} of \var{IUnknown} can
% be used to create a new interface.
parser_e_no_access_specifier_in_interfaces=03172_E_מזהה כניסה אינו יכול להיות בשימוש עם ממשקים
% The access specifiers \var{public}, \var{private}, \var{protected} and
% \var{pusblished} can't be used in interfaces because all methods
% of an interfaces must be public.
parser_e_no_vars_in_interfaces=03173_E_ממשק אינו יכול להכיל שדות
% Declarations of fields aren't allowed in interfaces. An interface
% can contain only methods
parser_e_no_local_proc_external=03174_E_לא ניתן להגדיר שגרה מקומית כחיצונית
% Declaring local procedures as external is not possible. Local procedures
% get hidden parameters that will make the chance of errors very high
parser_w_skipped_fields_before=03175_W_חלק מהשדות הבאים לפני "$1" לא אותחלו
% In Delphi mode, not all fields of a typed constant record have to be
% initialized, but the compiler warns you when it detects such situations.
parser_e_skipped_fields_before=03176_E_חלק מהשדות הבאים לפני "$1" לא אותחלו
% In all syntax modes but Delphi mode, you can't leave some fields uninitialized
% in the middle of a typed constant record
parser_w_skipped_fields_after=03177_W_חלק מהשדות הבאים אחרי "$1" לא אותחלו
% You can leave some fields at the end of a type constant record uninitialized
% (the compiler will initialize them to zero automatically). This may be the cause
% of subtle problems.
parser_e_varargs_need_cdecl_and_external=03178_E_השימוש בVarArgs (או '...' בMacPas) חייב להיות בשימוש עם CDecl/CPPDecl/MWPascal ו External
% The varargs directive (or the ``...'' varargs parameter in MacPas mode) can only be used with procedures or functions
% that are declared with \var{external} and one of \var{cdecl}, \var{cppdecl} and \var{mwpascal}. This functionality
% is only supported to provide a compatible interface to C functions like printf.
parser_e_self_call_by_value=03179_E_Self חייב להיות פרמטר רגיל (call-by-value)
% You can't declare self as a const or var parameter, it must always be
% a call-by-value parameter
parser_e_interface_has_no_guid=03180_E_הממשק "$1" אינו מכיל מזהה GUID
% When you want to assign an interface to a constant, then the interface
% must have a GUID value set.
parser_e_illegal_field_or_method=03181_E_המזהה של שדה או מתודה של מחלקה "$1" אינם ידועים
% Properties must refer to a field or method in the same class.
parser_w_proc_overriding_calling=03182_W_עולה על מוסכמות הפעלה "$1" עם "$2"
% There are two directives in the procedure declaration that specify a calling
% convention. Only the last directive will be used
parser_e_no_procvarobj_const=03183_E_ניתן לאתחל טיפוס קבוע של "procedure of object" רק עם NIL
% You can't assign the address of a method to a typed constant which has a
% 'procedure of object' type, because such a constant requires two addresses:
% that of the method (which is known at compile time) and that of the object or
% class instance it operates on (which can not be known at compile time).
parser_e_default_value_only_one_para=03184_E_ערך ברירת מחדל יכול להיות בשימוש רק עם פרמטר אחד
% It is not possible to specify a default value for several parameters at once.
% The following is invalid:
% \begin{verbatim}
% Procedure MyProcedure (A,B : Integer = 0);
% \end{verbatim}
% Instead, this should be declared as
% \begin{verbatim}
% Procedure MyProcedure (A : Integer = 0; B : Integer = 0);
% \end{verbatim}
parser_e_default_value_expected_for_para=03185_E_פרמטר ברירת מחדל דרוש עבור "$1"
% The specified parameter requires a default value.
parser_w_unsupported_feature=03186_W_שימוש במאפיין לא נתמך !
% You're trying to force the compiler into doing something it cannot do yet.
parser_h_c_arrays_are_references=03187_H_מערכים של C מועברים כהפניה
% Any array passed to a C functions is passed
% by a pointer (i.e. by reference).
parser_e_C_array_of_const_must_be_last=03188_E_מערך C של קבוע חייב להיות הארגומנט האחרון
% You can not add any other argument after an \var{array of const} for
% \var{cdecl} functions, as the size pushed on stack for this argument is
% not known.
parser_h_type_redef=03189_H_הגדרה מחודשת של הטיפוס "$1"
% This is an indicator that a previously declared type is
% being redefined as something else. This may, or may not
% be, a cause for errors.
parser_w_cdecl_has_no_high=03190_W_אין לפונקציות cdecl פרמטר גבוהה
% Functions declared with cdecl modifier do not pass an extra implicit parameter.
parser_w_cdecl_no_openstring=03191_W_פונקציות cdecel אינן תומכות ב open string
% Openstring is not supported for cdecl'ared functions.
parser_e_initialized_not_for_threadvar=03192_E_אין אפשרות לאתחל משתנה המוגדר כthreadvar
% Variables declared as threadvar can not be initialized with a default value.
% The variables will always be filled with zero at the start of a new thread.
parser_e_msg_only_for_classes=03193_E_ניתן להשתמש בהנחיית message רק בתוך מחלקה
% The message directive is only supported for Class types.
parser_e_procedure_or_function_expected=03194_E_מצפה לשיגרה או פונקציה
% A class method can only be specified for procedures and functions.
parser_e_illegal_calling_convention=03195_W_מתעלם ממוסכמת ההפעלה: "$1"
% Some calling conventions are supported only by certain CPUs. I.e. most non-i386 ports support
% only the standard ABI calling convention of the CPU.
parser_e_no_object_reintroduce=03196_E_לא ניתן להשתמש בREINTRODUCE בתוך אובייקט
% \var{reintroduce} is not supported for objects.
parser_e_paraloc_only_one_para=03197_E_כל ארגומנט חייב להכיל מיקום עצמאי.
% If locations for arguments are specified explicitly as it is required by
% some syscall conventions, each argument must have it's only location, things
% like \var{procedure p(i,j : longint 'r1');} aren't allowed
parser_e_paraloc_all_paras=03198_E_כל ארגומנט חייב להכיל מיקום מוגדר
% If one argument has an explicit argument location, all arguments of a procedure
% must have one.
parser_e_illegal_explicit_paraloc=03199_E_מיקום ארגומנט לא ידוע
% The location specified for an argument isn't recognized by the compiler
parser_e_32bitint_or_pointer_variable_expected=03200_E_מצפה לסוג משתנה של מספר שלם 32-Bit או מצביע
% The libbase for MorphOS/AmigaOS can be give only as \var{longint}, \var{dword} or any pointer variable.
parser_e_goto_outside_proc=03201_E_לא ניתן להשמש בgoto בין שני שיגרות
% It isn't allowed to use the \var{goto} statements referencing labels outside the
% current procedure. The following example shows the problem:
% \begin{verbatim}
% ...
% procedure p1;
% label
% l1;
%
% procedure p2;
% begin
% goto l1; // This goto ISN'T allowed
% end;
%
% begin
% p2
% l1:
% end;
% ...
%
% \end{verbatim}
parser_f_too_complex_proc=03202_F_השיגרה מסובכת מידי ודורשת שימוש של אוגרים רבים מידי
% Your procedure body is too long for the compiler. You should split the
% procedure into multiple smaller procedures.
parser_e_illegal_expression=03203_E_ביטוי לא חוקי
% This can occur under many circumstances. Mostly when trying to evaluate
% constant expressions.
parser_e_invalid_integer=03204_E_הביטוי של המספר השלם אינו חוקי
% You made an expression which isn't an integer, and the compiler expects the
% result to be an integer.
parser_e_invalid_qualifier=03205_E_שימוש לא חוקי במבחין
% One of the following is happening :
% \begin{itemize}
% \item You're trying to access a field of a variable that is not a record.
% \item You're indexing a variable that is not an array.
% \item You're dereferencing a variable that is not a pointer.
% \end{itemize}
parser_e_upper_lower_than_lower=03206_E_טווח ההגבלה הגבוהה קטן מטווח ההגבלה הנמוכה
% You are declaring a subrange, and the lower limit is higher than the high
% limit of the range.
parser_e_macpas_exit_wrong_param=03207_E_הפרמטר של Exit חייב להיות שם השיגרה תחתיו הוא נמצא
% Non local exit is not allowed. This error occurs only in mode MacPas.
parser_e_illegal_assignment_to_count_var=03208_E_הצבה לא חוקית של המשתנה בלולאת ה for "$1"
% The type of a \var{for} loop variable must be an ordinal type.
% Loop variables cannot be reals or strings. You can also not assign values to
% loop variables inside the loop (except in Delphi and TP modes). Use a while or
% repeat loop instead if you need to do something like that, since those
% constructs were built for that.
parser_e_no_local_var_external=03209_E_לא ניתן להגדיר משתנים מקומיים כחיצוניים
% Declaring local variables as external is not allowed. Only global variables can reference
% to external variables.
parser_e_proc_already_external=03210_E_השיגרה כבר מוגדרת כחיצונית
% The procedure is already declared with the EXTERNAL directive in an interface or
% forward declaration.
parser_w_implicit_uses_of_variants_unit=03211_W_שימוש משתמע ביחידת Variants
% The Variant type is used in the unit without any used unit using the Variants unit. The
% compiler has implicitly added the Variants unit to the uses list. To remove this warning
% the Variants unit needs to be added to the uses statement.
parser_e_no_static_method_in_interfaces=03212_E_השימוש במחלקה ומתודות סטטיים אינם יכוליות להיות בשימוש בממשק
% The specifier \var{class} and directive \var{static} can't be used in interfaces
% because all methods of an interfaces must be public.
parser_e_arithmetic_operation_overflow=03213_E_גלישה בפעולה מתמטית
% An operation on two integers values produced an overflow
parser_e_protected_or_private_expected=03214_E_מצפה לאיזור Protected או Private
% \var{strict} can be only used together with \var{protected} or \var{private}.
parser_e_illegal_slice=03215_E_SLICE אינ יכול להיות בשימוש מחוץ לרשימת פרמטרים
% \var{slice} can be used only for arguments accepting an open array parameter
parser_e_dispinterface_cant_have_parent=03216_E_מחלקת DISPINTERFACE אינה יכולה להכיל הורה
% A DISPINMTERFACE is a special type of interface which can't have a parent class
parser_e_dispinterface_needs_a_guid=03217_E_DISPINTERFACE חייב GUID
% A DISPINMTERFACE always needs an interface identification
parser_w_overridden_methods_not_same_ret=03218_W_המתודות החדשות חייבות להחזיר את אותו טיפוס נתונים. הקוד הנוכחי יכול לגרום לקריסה בעקבות באג של המפרש של דלפי (“$2” עולה על “$1” אשר מכיל טיפוס נתונים אחר בהחזרה)
% If you declare overridden methods in a class definition, they must
% have the same return type. Some versions of Delphi allow you to change the
% return type of interface methods, and even to change procedures into
% functions, but the resulting code may crash depending on the types used
% and the way the methods are called.
parser_e_dispid_must_be_ord_const=03219_E_מזהה Dispatch חייב להיות קבוע בעל ערך סידורי
% The \var{dispid} keyword must be followed by an ordinal constant (the dispid index).
parser_e_array_range_out_of_bounds=03220_E_הטווח של המערך גבוהה מידי
% Regardless of the size taken up by its elements, an array cannot have more
% than high(ptrint) elements. Additionally, the range type must be a subrange
% of ptrint.
parser_e_packed_element_no_var_addr=03221_E_לא ניתן למצוא את הכתובת של ביט המערך ארוז, אלמנטים או שדות של המערך
% If you declare an array or record as \var{packed} in Mac Pascal mode (or as \var{packed} in any mode with \var{\{\$bitpacking on\}}), it will
% be packed at the bit level. This means it becomes impossible to take addresses
% of individual array elements or record fields. The only exception to this rule is in case of packed arrays elements
% whose packed size is a multple of 8 bits.
parser_e_packed_dynamic_open_array=03222_E_לא ניתן לארוז מערך דינאמי
% Only regular (and possibly in the future also open) arrays can be packed
parser_e_packed_element_no_loop=03223_E_אלמנטים ושדות של מערכי ביט ארוזים אינם יכולים לשמש כמשתנים ללולאות
% If you declare an array or record as \var{packed} in Mac Pascal mode (or as \var{packed} in any mode with \var{\{\$bitpacking on\}}), it will
% be packed at the bit level. For performance reasons, they cannot be
% used as loop variables.
parser_e_type_var_const_only_in_records_and_classes=03224_E_VAR, TYPE and CONST are allowed only in records, objects and classes
% The usage of VAR, TYPE and CONST to declare new types inside an object is allowed only inside
% records, objects and classes.
parser_e_cant_create_generics_of_this_type=03225_E_הטיפוס אינו יכול להיות generic
% Only Classes, Objects, Interfaces and Records are allowed to be used as generic
parser_w_no_lineinfo_use_switch=03226_W_אין לטעון את הספרייה LINEINFO בצורה ידנית. על מנת להשתמש בספרייה יש להשתמש במתג -gl במקום
% Do not use the LINEINFO unit directly, Use the \var{-gl} switch which automatically adds the
% unit for reading the selected type of debugging information instead.
parser_e_no_funcret_specified=03227_E_לא צויין טיפוס החזרה עבור הפונקציה "$1"
% The first time you declare a function you have to declare it completely,
% including all parameters and the result type.
parser_e_special_onlygenerics=03228_E_השימוש בSpecialization מורשה רק כאשר משתמשים בטיפוסי generic
% Types not being generics can't be specialized
parser_e_no_generics_as_params=03229_E_לא ניתן להשתמש בgenerics בתור פרמטרים כאשר יש שימוש ב spezializing generics
% When specializing a generic, only non-generic types can be used as parameters.
parser_e_type_object_constants=03230_E_השימוש בקבועים של אובייקטים המכילים VMT אינו מורשה
% If an object requires a VMT either because it contains a constructor or virtual methods,
% it's not allowed to create constants of it. In TP and Delphi mode this is allowed
% for compatibility reasons.
parser_e_label_outside_proc=03231_E_שימוש בכתובת של תוויות המוכרזות מחוץ למתחם הנוכחי אינו מורשה
% It isn't allowed to take the addresss of labels outside the
% current procedure.
parser_e_initialized_not_for_external=03233_E_לא ניתן לאתחל ערך ברירת מחדל למשתנים המוגדרים כexternal
% Variables declared as external can not be initialized with a default value.
parser_e_illegal_function_result=03234_E_טיפוס החזרה של הפונקציה אינו חוקי
% Some types like file types can not be used as function result
parser_e_no_common_type=03235_E_אין טיפוס משותף ל "$1" ו "$2"
% To perform an operation beween integers, the compiler converts both operands
% to their common type, which appears to be an invalid type. To determine the
% common type of the operands, the compiler takes the minimum of the minimal values
% of both types, and the maximum of the maximal values of both types. The common
% type is then minimum..maximum.
parser_e_no_generics_as_types=03236_E_Generics ללא specialization אינו יכול להיות בשימוש בתור טיפוס למשתנה
% Generics must be always specialized before being used as variable type
parser_w_register_list_ignored=03237_W_מתעלם מרשימת האוגרים עבור שגרות assemblter טהורות
% When using pure assembler routines, the list with modified registers is ignored.
% \end{description}
#
# Type Checking
#
# 04049 is the last used one
#
% \section{Type checking errors}
% This section lists all errors that can occur when type checking is
% performed.
% \begin{description}
parser_e_implements_must_be_class_or_interface=03238_E_Implements property must have class or interface type
% A property which implements an interface must be of type class or interface.
parser_e_implements_must_have_correct_type=03239_E_Implements-property must implement interface of correct type, found "$1" expected "$2"
% A property which implements an interface actually implements a different interface.
parser_e_implements_must_read_specifier=03240_E_Implements-property must have read specifier
% A property which implements an interface must have at least a read specifier.
parser_e_implements_must_not_have_write_specifier=03241_E_Implements-property must not have write-specifier
% A property which implements an interface may not have a write specifier.
parser_e_implements_must_not_have_stored_specifier=03242_E_Implements-property must not have stored-specifier
% A property which implements an interface may not have a stored specifier.
parser_e_implements_uses_non_implemented_interface=03243_E_Implements-property used on unimplemented interface: "$1"
% The interface which is implemented by a property is not an interface implemented by the class.
parser_e_unsupported_real=03244_E_Floating point not supported for this target
% The compiler parsed a floating point expression, but it is not supported.
parser_e_class_doesnt_implement_interface=03245_E_Class "$1" does not implement interface "$2"
% The delegated interface is not implemented by the class given in the implements clause.
parser_e_class_implements_must_be_interface=03246_E_Type used by implements must be an interface
% The \var{implements} keyword must be followed by an interface type.
parser_e_cant_export_var_different_name=03247_E_Variables cannot be exported with a different name on this target, add the name to the declaration using the "export" directive (variable name: $1, declared export name: $2)
% On most targets it is not possible to change the name under which a variable
% is exported inside the \var{exports} statement of a library.
% In that case, you have to specify the export name at the point where the
% variable is declared, using the \var{export} and \var{alias} directives.
parser_e_weak_external_not_supported=03248_E_Weak external symbols are not supported for the current target
% A "weak external" symbol is a symbol which may or may not exist at (either static
% or dynamic) link time. This concept may not be available (or implemented yet)
% on the current cpu/OS target.
parser_e_forward_mismatch=03249_E_Forward type definition does not match
% Classes and interfaces being defined forward must have the same type
% when being implemented. A forward interface cannot be changed into a class.
parser_n_ignore_lower_visibility=03250_N_Virtual method "$1" has a lower visibility ($2) than parent class $3 ($4)
% The virtual method overrides an method that is declared with a higher visibility. This might give
% unexpected results. E.g., in case the new visibility is private then a call to ``inherited'' in a
% new child class will call the higher-visible method in a parent class and ignores the private method.
parser_e_field_not_allowed_here=03251_E_Fields cannot appear after a method or property definition, start a new visibility section first
% Once a method or property has been defined in a class or object, you cannot define any fields afterwards
% without starting a new visibility section (such as \var{public}, \var{private}, etc.). The reason is
% that otherwise the source code can appear ambiguous to the compiler, since it is possible to use modifiers
% such as \var{default} and \var{register} also as field names.
parser_e_no_local_para_def=03252_E_Parameters or result types cannot contain local type definitions. Use a separate type definition in a type block.
% In Pascal, types are not considered to be identical simply because they are semantically equivalent.
% Two variables or parameters are only considered to be of the same type if they refer to the
% same type definition.
% As a result, it is not allowed to define new types inside parameter lists, because then it is impossible to
% refer to the same type definition in the procedure headers of the interface and implementation of a unit
% (both procedure headers would define a separate type). Keep in mind that expressions such as
% ``file of byte'' or ``string[50]'' also define a new type.
parser_e_abstract_and_sealed_conflict=03253_E_ABSTRACT and SEALED conflict
% ABSTRACT and SEALED cannot be used together in one declaration
parser_e_sealed_descendant=03254_E_Cannot create a descendant of the sealed class "$1"
% Sealed means that class cannot be derived by another class.
parser_e_sealed_class_cannot_have_abstract_methods=03255_E_SEALED class cannot have an ABSTRACT method
% Sealed means that class cannot be derived. Therefore no one class is able to override an abstract method in a sealed class.
parser_e_only_virtual_methods_final=03256_E_Only virtual methods can be final
% You are declaring a method as final, when it is not declared to be
% virtual.
parser_e_final_can_no_be_overridden=03257_E_Final method cannot be overridden: "$1"
% You are trying to \var{override} a virtual method of a parent class that does
% not exist.
parser_e_multiple_messages=03258_E_Only one message can be used per method.
% It is not possible to associate multiple messages with a single method.
parser_e_invalid_enumerator_identifier=03259_E_Invalid enumerator identifier: "$1"
% Only "MoveNext" and "Current" enumerator identifiers are supported.
parser_e_enumerator_identifier_required=03260_E_Enumerator identifier required
% "MoveNext" or "Current" identifier must follow the \var{enumerator} modifier.
parser_e_enumerator_movenext_is_not_valid=03261_E_Enumerator MoveNext pattern method is not valid. Method must be a function with the Boolean return type and no required arguments.
% "MoveNext" enumerator pattern method must be a function with Boolean return type and no required arguments
parser_e_enumerator_current_is_not_valid=03262_E_Enumerator Current pattern property is not valid. Property must have a getter.
% "Current" enumerator pattern property must have a getter
parser_e_only_one_enumerator_movenext=03263_E_Only one enumerator MoveNext method is allowed per class/object
% Class or Object can have only one enumerator MoveNext declaration.
parser_e_only_one_enumerator_current=03264_E_Only one enumerator Current property is allowed per class/object
% Class or Object can have only one enumerator Current declaration.
parser_e_for_in_loop_cannot_be_used_for_the_type=03265_E_For in loop cannot be used for the type "$1"
% For in loop can be used not for all types. For example it cannot be used for the enumerations with jumps.
parser_e_objc_requires_msgstr=03266_E_Objective-C messages require their Objective-C selector name to be specified using the "message" directive.
% Objective-C messages require their Objective-C name (selector name) to be specified using the \var{message `someName:'} procedure directive.
% While bindings to other languages automatically generate such names based on the identifier you use (by replacing
% all underscores with colons), this is unsafe since nothing prevents an Objective-C method name to contain actual
% colons.
parser_e_objc_no_constructor_destructor=03267_E_Objective-C does not have formal constructors nor destructors. Use the alloc, initXXX and dealloc messages.
% The Objective-C language does not have any constructors or destructors. While there are some messages with a similar
% purpose (such as \var{init} and \var{dealloc}), these cannot be identified using automatic parsers and do not
% guarantee anything like Pascal constructors/destructors (e.g., you have to take care of only calling ``designated''
% inherited ``constructors''). For these reasons, we have opted to follow the standard Objective-C patterns for
% instance creation/destruction.
parser_e_message_string_too_long=03268_E_Message name is too long (max. 255 characters)
% Due to compiler implementation reasons, message names are currently limited to 255 characters.
parser_e_objc_message_name_too_long=03269_E_Objective-C message symbol name for "$1" is too long
% Due to compiler implementation reasons, mangled message names (i.e., the symbol names used in the assembler
% code) are currently limited to 255 characters.
parser_h_no_objc_parent=03270_H_Defining a new Objective-C root class. To derive from another root class (e.g., NSObject), specify it as the parent class.
% If no parent class is specified for an Object Pascal class, then it automatically derives from TObject.
% Objective-C classes however do not automatically derive from NSObject, because one can have multiple
% root classes in Objective-C. For example, in the Cocoa framework both NSObject and NSProxy are root classes.
% Therefore, you have to explicitly define a parent class (such as NSObject) if you want to derive your
% Objective-C class from it.
parser_e_no_objc_published=03271_E_Objective-C classes cannot have published sections.
% In Object Pascal, ``published'' determines whether or not RTTI is generated. Since the Objective-C runtime always needs
% RTTI for everything, this specified does not make sense for Objective-C classes.
parser_f_need_objc=03272_F_This module requires an Objective-C mode switch to be compiled
% This error indicates the use of Objective-C language features without an Objective-C mode switch
% active. Enable one via the -M command line switch, or the {\$modeswitch x} directive.
parser_e_must_use_override=03273_E_Inherited methods can only be overridden in Objective-C and Java, add "override" (inherited method defined in $1)
parser_h_should_use_override=03274_H_Inherited methods can only be overridden in Objective-C and Java, add "override" (inherited method defined in $1).
% It is not possible to \var{reintroduce} methods in Objective-C or Java like in Object Pascal. Methods with the same
% name always map to the same virtual method entry. In order to make this clear in the source code,
% the compiler always requires the \var{override} directive to be specified when implementing overriding
% Objective-C or Java methods in Pascal. If the implementation is external, this rule is relaxed because Objective-C and Java
% do not have any \var{override}-style keyword (since it's the default and only behaviour in these languages),
% which makes it hard for automated header conversion tools to include it everywhere.
% The type in which the inherited method is defined is explicitly mentioned, because this may either
% be an objcclass or an objccategory in case of Objective-C.
parser_e_objc_message_name_changed=03275_E_Message name "$1" in inherited class is different from message name "$2" in current class.
% An overriding Objective-C method cannot have a different message name than an inherited method. The reason
% is that these message names uniquely define the message to the Objective-C runtime, which means that
% giving them a different message name breaks the ``override'' semantics.
parser_e_unique_unsupported=03276_E_It is not yet possible to make unique copies of Objective-C or Java types
% Duplicating an Objective-C or Java type using \var{type x = type y;} is not yet supported. You may be able to
% obtain the desired effect using \var{type x = objcclass(y) end;} resp.{} \var{type x = class(y) end;} instead.
parser_e_no_category_as_types=03277_E_Objective-C categories and Object Pascal class helpers cannot be used as types
% It is not possible to declare a variable as an instance of an Objective-C
% category or an Object Pascal class helper. A category/class helper adds
% methods to the scope of an existing class, but does not define a type by
% itself. An exception of this rule is when inheriting an Object Pascal class
% helper from another class helper.
parser_e_no_category_override=03278_E_Categories do not override, but replace methods. Use "reintroduce" instead.
parser_e_must_use_reintroduce_objc=03279_E_Replaced methods can only be reintroduced in Objective-C, add "reintroduce" (replaced method defined in $1).
parser_h_should_use_reintroduce_objc=03280_H_Replaced methods can only be reintroduced in Objective-C, add "reintroduce" (replaced method defined in $1).
% A category replaces an existing method in an Objective-C class, rather than that it overrides it.
% Calling an inherited method from an category method will call that method in
% the extended class' parent, not in the extended class itself. The
% replaced method in the original class is basically lost, and can no longer be
% called or referred to. This behaviour corresponds somewhat more closely to
% \var{reintroduce} than to \var{override} (although in case of \var{reintroduce}
% in Object Pascal, hidden methods are still reachable via inherited).
% The type in which the inherited method is defined is explicitly mentioned, because this may either
% be an objcclass or an objccategory.
parser_e_implements_getter_not_default_cc=03281_E_Getter for implements interface must use the target's default calling convention.
% Interface getters are called via a helper in the run time library, and hence
% have to use the default calling convention for the target (\var{register} on
% i386 and x86\_64, \var{stdcall} on other architectures).
parser_e_no_refcounted_typed_file=03282_E_Typed files cannot contain reference-counted types.
% The data in a typed file cannot be of a reference counted type (such as
% \var{ansistring} or a record containing a field that is reference counted).
parser_e_operator_not_overloaded_2=03283_E_Operator is not overloaded: $2 "$1"
% You are trying to use an overloaded operator when it is not overloaded for
% this type.
parser_e_operator_not_overloaded_3=03284_E_Operator is not overloaded: "$1" $2 "$3"
% You are trying to use an overloaded operator when it is not overloaded for
% this type.
parser_e_more_array_elements_expected=03285_E_Expected another $1 array elements
% When declaring a typed constant array, you provided to few elements to initialize the array
parser_e_string_const_too_long=03286_E_String constant too long while ansistrings are disabled
% Only when a piece of code is compiled with ansistrings enabled (\var{\{\$H+\}}), string constants
% longer than 255 characters are allowed.
parser_e_invalid_univ_para=03287_E_Type cannot be used as univ parameter because its size is unknown at compile time: "$1"
% \var{univ} parameters are compatible with all values of the same size, but this
% cannot be checked in case a parameter's size is unknown at compile time.
parser_e_only_one_class_constructor_allowed=03288_E_Only one class constructor can be declared in class: "$1"
% You are trying to declare more than one class constructor but only one class constructor can be declared.
parser_e_only_one_class_destructor_allowed=03289_E_Only one class destructor can be declared in class: "$1"
% You are trying to declare more than one class destructor but only one class destructor can be declared.
parser_e_no_paras_for_class_constructor=03290_E_Class constructors cannot have parameters
% You are declaring a class constructor with a parameter list. Class constructor methods
% cannot have parameters.
parser_e_no_paras_for_class_destructor=03291_E_Class destructors cannot have parameters
% You are declaring a class destructor with a parameter list. Class destructor methods
% cannot have parameters.
parser_f_modeswitch_objc_required=03292_F_This construct requires the \{\$modeswitch objectivec1\} mode switch to be active
% Objective-Pascal constructs are not supported when \{\$modeswitch ObjectiveC1\}
% is not active.
parser_e_widestring_to_ansi_compile_time=03293_E_Unicodechar/string constants cannot be converted to ansi/shortstring at compile-time
% It is not possible to use unicodechar and unicodestring constants in
% constant expressions that have to be converted into an ansistring or shortstring
% at compile time, for example inside typed constants. The reason is that the
% compiler cannot know what the actual ansi encoding will be at run time.
parser_e_objc_enumerator_2_0=03294_E_For-in Objective-Pascal loops require \{\$modeswitch ObjectiveC2\} to be active
% Objective-C ``fast enumeration'' support was added in Objective-C 2.0, and
% hence the appropriate modeswitch has to be activated to expose this feature.
% Note that Objective-C 2.0 programs require Mac OS X 10.5 or later.
parser_e_objc_missing_enumeration_defs=03295_E_The compiler cannot find the NSFastEnumerationProtocol or NSFastEnumerationState type in the CocoaAll unit
% Objective-C for-in loops (fast enumeration) require that the compiler can
% find a unit called CocoaAll that contains definitions for the
% NSFastEnumerationProtocol and NSFastEnumerationState types. If you get this
% error, most likely the compiler is finding and loading an alternate CocoaAll
% unit.
parser_e_no_procvarnested_const=03296_E_Typed constants of the type 'procedure is nested' can only be initialized with NIL and global procedures/functions
% A nested procedural variable consists of two components: the address of the
% procedure/function to call (which is always known at compile time), and also
% a parent frame pointer (which is never known at compile time) in case the
% procedural variable contains a reference to a nested procedure/function.
% Therefore such typed constants can only be initialized with global
% functions/procedures since these do not require a parent frame pointer.
parser_f_no_generic_inside_generic=03297_F_Declaration of generic class inside another generic class is not allowed
% At the moment, scanner supports recording of only one token buffer at the time
% (guarded by internal error 200511173 in tscannerfile.startrecordtokens).
% Since generics are implemented by recording tokens, it is not possible to
% have declaration of generic class inside another generic class.
parser_e_forward_intf_declaration_must_be_resolved=03298_E_Forward declaration "$1" must be resolved before a class can conform to or implement it
% An Objective-C protocol or Java Interface must be fully defined before classes can conform to it.
% This error occurs in the following situation (example for Objective-C, but the same goes for Java interfaces):
% \begin{verbatim}
% Type MyProtocol = objcprotoocl;
% ChildClass = Class(NSObject,MyProtocol)
% ...
% end;
% \end{verbatim}
% where \var{MyProtocol} is declared but not defined.
parser_e_no_record_published=03299_E_Record types cannot have published sections
% Published sections can be used only inside classes.
parser_e_no_destructor_in_records=03300_E_Destructors are not allowed in records or helpers
% Destructor declarations are not allowed in records or helpers.
parser_e_class_methods_only_static_in_records=03301_E_Class methods must be static in records
% Class methods declarations are not allowed in records without static modifier.
% Records have no inheritance and therefore non static class methods have no sense for them.
parser_e_no_parameterless_constructor_in_records=03302_E_Parameterless constructors are not allowed in records or record/type helpers
% Constructor declarations with no arguments are not allowed in records or record/type helpers.
parser_e_at_least_one_argument_must_be_of_type=03303_E_Either the result or at least one parameter must be of type "$1"
% It is required that either the result of the routine or at least one of its parameters be of the specified type.
% For example class operators either take an instance of the structured type in which they are defined, or they return one.
parser_e_cant_use_type_parameters_here=03304_E_Type parameters may require initialization/finalization - cannot be used in variant records
% Type parameters may be specialized with types which (e.g. \var{ansistring}) need initialization/finalization
% code which is implicitly generated by the compiler.
parser_e_externals_no_section=03305_E_Variables being declared as external cannot be in a custom section
% A section directive is not valid for variables being declared as external.
parser_e_section_no_locals=03306_E_Non-static and non-global variables cannot have a section directive
% A variable placed in a custom section is always statically allocated so it must be either a static or global variable.
parser_e_not_allowed_in_helper=03307_E_"$1" is not allowed in helper types
% Some directives and specifiers like "virtual", "dynamic", "override" are not
% allowed inside helper types in mode ObjFPC (they are ignored in mode Delphi),
% because they have no meaning within helpers. Also "abstract" isn't allowed in
% either mode.
parser_e_no_class_constructor_in_helpers=03308_E_Class constructors are not allowed in helpers
% Class constructor declarations are not allowed in helpers.
parser_e_inherited_not_in_record=03309_E_The use of "inherited" is not allowed in a record
% As records don't support inheritance the use of "inherited" is prohibited for
% these as well as for record helpers (in mode "Delphi" only).
parser_e_no_types_in_local_anonymous_records=03310_E_Type declarations are not allowed in local or anonymous records
% Records with types must be defined globally. Types cannot be defined inside records which are defined in a
% procedure or function or in anonymous records.
parser_e_duplicate_implements_clause=03311_E_Duplicate implements clause for interface "$1"
% A class may delegate an interface using the "implements" clause only to a single property. Delegating it multiple times
% is a error.
parser_e_mapping_no_implements=03312_E_Interface "$1" cannot be delegated by "$2", it already has method resolutions
% Method resolution clause maps a method of an interface to a method of the current class. Therefore the current class
% has to implement the interface directly. Delegation is not possible.
parser_e_implements_no_mapping=03313_E_Interface "$1" cannot have method resolutions, "$2" already delegates it
% Method resolution is only possible for interfaces that are implemented directly, not by delegation.
parser_e_invalid_codepage=03314_E_Invalid codepage
% When declaring a string with a given codepage, the range of valid codepages values is limited
% to 0 to 65535.
parser_e_final_only_const_var=03315_E_Only fields (var-sections) and constants can be final in object types
% A final (class) field must be assigned a single value in the (class) constructor, and cannot
% be overwritten afterwards. A final (typed) constant is read-only.
parser_e_final_only_external=03316_E_Final fields are currently only supported for external classes
% Support for final fields in non-external classes requires a full data flow
% analysis implementation in FPC, which it currently still lacks.
parser_e_no_typed_const=03317_E_Typed constants are not allowed here, only formal constants are
% Java interfaces define a namespace in which formal constant can be defined,
% but since they define no storage it is not possible to define typed constants
% in them (those are more or less the same as initialised class fields).
parser_e_java_no_inherited_constructor=03318_E_Constructors are not automatically inherited in the JVM; explicitly add a constructor that calls the inherited one if you need it
% Java does not automatically add inherited constructors to child classes, so that they can be hidden.
% For compatibility with external Java code, FPC does the same. If you require access to the same
% constructors in a child class, define them in the child class and call the inherited one from
% there.
parser_d_internal_parser_string=03319_D_Parsing internally generated code: $1
% The compiler sometimes internally constructs Pascal code that is subsequently
% injected into the program. These messages display such code, in order to help
% with debugging errors in them.
parser_e_feature_unsupported_for_vm=03320_E_This language feature is not supported on managed VM targets
% Certain language features are not supported on targets that are managed virtual machines.
parser_e_jvm_invalid_virtual_constructor_call=03321_E_Calling a virtual constructor for the current instance inside another constructor is not possible on the JVM target
% The JVM does not natively support virtual constructor. Unforunately, we are not aware of a way to
% emulate them in a way that makes it possible to support calling virtual constructors
% for the current instance inside another constructor.
parser_e_method_lower_visibility=03322_E_Overriding method "$1" cannot have a lower visibility ($2) than in parent class $3 ($4)
% The JVM does not allow lowering the visibility of an overriding method.
parser_e_nostackframe_without_assembler=03323_E_Procedure/Function declared with call option NOSTACKFRAME but without ASSEMBLER
% nostackframe call modifier is supposed to be used in conjunction with assembler.
parser_e_nostackframe_with_locals=03324_E_Procedure/Function declared with call option NOSTACKFRAME but local stack size is $1
% nostackframe call modifier used without assembler modifier
% might still generate local stack needs.
parser_e_cannot_generate_property_getter_setter=03325_E_Cannot generate property getter/setter $1 because its name clashes with existing identifier $2
% Automatically generated getters/setters cannot have the same name as existing
% identifiers, because this may change the behaviour of existing code.
parser_w_overriding_property_getter_setter=03326_W_Automatically generated property getter/setter $1 overrides the same-named getter/setter in class $2
% Automatically generated property getters/setters on the JVM platform are virtual methods, because
% the JVM does not support non-virtual methods that can be changed in child classes. This means
% that if a child class changes an inherited property definition, the behaviour of that property
% can change compared to native targets since even if a variable is declared as the parent type,
% by calling the virtual method the getter from the child will be used. This is different from
% the behaviour on native targets or when not activating automatically generated setters/getters,
% because in that case only the declared type of a variable influences the property behaviour.
parser_w_case_difference_auto_property_getter_setter_prefix=03327_W_Case mismatch between declared property getter/setter $1 and automatically constructed name $2, not changing declared name
% If a property's specified getter/setter already corresponded to the naming convention specified
% by the automatic getter/setter generation setting except in terms of upper/lowercase, the
% compiler will print a warning because it cannot necessarily change that other declaration itself
% not can it add one using the correct case (it could conflict with the original declaration).
% Manually correct the case of the getter/setter to conform to the desired coding rules.
% \var{TChild} overrides
parser_e_no_consts_in_local_anonymous_records=03328_E_Constants declarations are not allowed in local or anonymous records
% Records with constants must be defined globally. Constants cannot be defined inside records which are defined in a
% procedure or function or in anonymous records.
parser_e_no_methods_in_local_anonymous_records=03329_E_Method declarations are not allowed in local or anonymous records
% Records with methods must be defined globally. Methods cannot be defined inside records which are defined in a
% procedure or function or in anonymous records.
parser_e_no_properties_in_local_anonymous_records=03330_E_Property declarations are not allowed in local or anonymous records
% Records with properties must be defined globally. Properties cannot be defined inside records which are defined in a
% procedure or function or in anonymous records.
parser_e_no_class_in_local_anonymous_records=03331_E_Class member declarations are not allowed in local or anonymous records
% Records with class members must be defined globally. Class members cannot be defined inside records which are defined in a
% procedure or function or in anonymous records.
parser_e_not_allowed_in_record=03332_E_Visibility section "$1" not allowed in records
% The visibility sections \var(protected) and \var(strict protected) are only
% useful together with inheritance. Since records do not support that they are
% forbidden.
parser_e_dir_not_allowed=03333_E_Directive "$1" not allowed here
% This directive is not allowed in the given context. E.g. "static"
% is not allowed for instance methods or class operators.
parser_e_no_assembler_in_generic=03334_E_Assembler blocks not allowed inside generics
% The use of assembler blocks/routines is not allowed inside generics.
parser_e_property_only_sgr=03335_E_Properties can be only static, global or inside structured types
% Properties cannot be declared local, only global, using the static
% directive or inside structured types.
parser_e_overloaded_have_same_mangled_name=03336_E_Overloaded routines have the same mangled name
% Some platforms, such as the JVM platform, encode the parameters in the routine name in
% a prescribed way, and this encoding may map different Pascal types to the same encoded
% (a.k.a.\ ``mangled'') name. This error can only be solved by removing or changing the
% conflicting definitions' parameter declarations or routine names.
parser_e_default_value_val_const=03337_E_Default values can only be specified for value, const and constref parameters
% A default parameter value allows you to not specify a value for this parameter
% when calling the routine, and the compiler will instead pass the specified
% default (constant) value. As a result, default values can only be specified
% for parameters that can accept constant values.
parser_w_ptr_type_ignored=03338_W_Pointer type "$1" ignored
% The specified pointer type modifier is ignored, because it is not supported on
% the current platform. This happens, for example, when a far pointer is
% declared on a non-x86 platform.
parser_e_global_generic_references_static=03339_E_Global Generic template references static symtable
% A generic declared in the interface section of a unit must not reference symbols that belong
% solely to the implementation section of that unit.
parser_u_already_compiled=03340_UL_Unit $1 has been already compiled meanwhile.
% This tells you that the recursive reading of the uses clauses triggered already
% a compilation of the current unit, so the current compilation can be aborted.
%
%
%
% \end{description}
%
# Type Checking
#
# 04123 is the last used one
#
% \section{Type checking errors}
% This section lists all errors that can occur when type checking is
% performed.
% \begin{description}
type_e_mismatch=04000_E_טיפוס נתונים לא חופף
% This can happen in many cases:
% \begin{itemize}
% \item The variable you're assigning to is of a different type than the
% expression in the assignment.
% \item You are calling a function or procedure with parameters that are
% incompatible with the parameters in the function or procedure definition.
% \end{itemize}
type_e_incompatible_types=04001_E_טיפוס נתונים לא תואם: נעשה שימוש ב "$1" מצפה ל"$2"
% There is no conversion possible between the two types
% Another possiblity is that they are declared in different
% declarations:
% \begin{verbatim}
% Var
% A1 : Array[1..10] Of Integer;
% A2 : Array[1..10] Of Integer;
%
% Begin
% A1:=A2; { This statement gives also this error, it
% is due the strict type checking of pascal }
% End.
% \end{verbatim}
type_e_not_equal_types=04002_E_אי התאמה בין טיפוסי הנתונים "$1" ו "$2"
% The types are not equal
type_e_type_id_expected=04003_E_מצפה לטיפוס נתונים
% The identifier is not a type, or you forgot to supply a type identifier.
type_e_variable_id_expected=04004_E_מצפה למזהה של משתנה
% This happens when you pass a constant to a routine (such as \var{Inc} var or \var{Dec})
% when it expects a variable. You can only pass variables as arguments to these functions.
type_e_integer_expr_expected=04005_E_מצפה למספר שלם, אך התקבל "$1"
% The compiler expects an expression of type integer, but gets a different
% type.
type_e_boolean_expr_expected=04006_E_מצפה לביטוי בוליאני, אך התקבל "$1"
% The expression must be a boolean type, it should be return true or
% false.
type_e_ordinal_expr_expected=04007_E_מצפה לטיפוס סודר
% The expression must be of ordinal type, i.e., maximum a \var{Longint}.
% This happens, for instance, when you specify a second argument
% to \var{Inc} or \var{Dec} that doesn't evaluate to an ordinal value.
type_e_pointer_type_expected=04008_E_מצפה למצביע, אך התקבל "$1"
% The variable or expression isn't of the type \var{pointer}. This
% happens when you pass a variable that isn't a pointer to \var{New}
% or \var{Dispose}.
type_e_class_type_expected=04009_E_מצפה למחלקה, אך התקבל "$1"
% The variable of expression isn't of the type \var{class}. This happens
% typically when
% \begin{enumerate}
% \item The parent class in a class declaration isn't a class.
% \item An exception handler (\var{On}) contains a type identifier that
% isn't a class.
% \end{enumerate}
type_e_cant_eval_constant_expr=04011_E_לא ניתן לנתח את הביטוי הקבוע
% This error can occur when the bounds of an array you declared does
% not evaluate to ordinal constants
type_e_set_element_are_not_comp=04012_E_האלמנטים של הקבוצה אינם תואמים
% You are trying to make an operation on two sets, when the set element types
% are not the same. The base type of a set must be the same when taking the
% union
type_e_set_operation_unknown=04013_E_הפעולה אינה בשימוש עם קבוצות
% several binary operations are not defined for sets
% like div mod ** (also >= <= for now)
type_w_convert_real_2_comp=04014_W_המרה אוטומטית של טיפוס עשרוני ל COMP אשר הוא מספר שלם
% An implicit type conversion from a real type to a \var{comp} is
% encountered. Since \var{comp} is a 64 bit integer type, this may indicate
% an error.
type_h_use_div_for_int=04015_H_השתמש בDIV במקום על מנת לקבל תוצאה של מספר שלם
% When hints are on, then an integer division with the '/' operator will
% procuce this message, because the result will then be of type real
type_e_strict_var_string_violation=04016_E_טיפוס המחרוזת אינם תואם בגלל השימוש במתג $V+
% When compiling in \var{\{\$V+\}} mode, the string you pass as a parameter
% should be of the exact same type as the declared parameter of the procedure.
type_e_succ_and_pred_enums_with_assign_not_possible=04017_E_לא ניתן להציב ערכים למניות תוך שימוש בsucc או pred
% When you declared an enumeration type which has assignments in it, as in C,
% like in the following:
% \begin{verbatim}
% Tenum = (a,b,e:=5);
% \end{verbatim}
% you cannot use the \var{Succ} or \var{Pred} functions on them.
type_e_cant_read_write_type=04018_E_לא ניתן לקרוא או לכתוב משתנים מהסוג הנוכחי
% You are trying to \var{read} or \var{write} a variable from or to a
% file of type text, which doesn't support that. Only integer types,
% reals, pchars and strings can be read from/written to a text file.
% Booleans can only be written to text files.
type_e_no_readln_writeln_for_typed_file=04019_E_לא ניתן להשתמש בreadln וwriteln על טיפוס נתונים מסוג file
% \var{readln} and \var{writeln} are only allowed for text files.
type_e_no_read_write_for_untyped_file=04020_E_לא ניתן לקרוא או לכתוב טיפוס לא מוגר של קבצים
% \var{read} and \var{write} are only allowed for text or typed files.
type_e_typeconflict_in_set=04021_E_התנגשות של טיפוס נתונים בתוך איברים של קבוצה
% There is at least one set element which is of the wrong type, i.e. not of
% the set type.
type_w_maybe_wrong_hi_lo=04022_W_lo/hi(dword/qword) מחזיר את הערך העליון/תחתון של word/dword
% \fpc supports an overloaded version of \var{lo/hi} for \var{longint/dword/int64/qword}
% which returns the lower/upper word/dword of the argument. TP always uses
% a 16 bit \var{lo/hi} which returns always bits 0..7 for \var{lo} and the
% bits 8..15 for \var{hi}. If you want the TP behavior you have
% to type cast the argument to \var{word/integer}
type_e_integer_or_real_expr_expected=04023_E_מצפה לביטוי של מספר שלם או מספר ממשי
% The first argument to \var{str} must a real or integer type.
type_e_wrong_type_in_array_constructor=04024_E_שימוש שגוי בטיפוס "$1" בתוך יוצר המערך
% You are trying to use a type in an array constructor which is not
% allowed.
type_e_wrong_parameter_type=04025_E_טיפוס לא מתאים לארגומנט מספר $1: התקבל "$2", מצפה ל"$3"
% You are trying to pass an invalid type for the specified parameter.
type_e_no_method_and_procedure_not_compatible=04026_E_המשתנה של המתודה והשגרה אינם תואמים
% You can't assign a method to a procedure variable or a procedure to a
% method pointer.
type_e_wrong_math_argument=04027_E_ביטוי קבוע לא חוקי הוזן לפונקציה מתמטית פנימית
% The constant argument passed to a ln or sqrt function is out of
% the definition range of these functions.
type_e_no_addr_of_constant=04028_E_לא ניתן לקבל את הכתובת של הקבוע
% It is not possible to get the address of a constant expression, because they
% aren't stored in memory. You can try making it a typed constant. This error
% can also be displayed if you try to pass a property to a var parameter.
type_e_argument_cant_be_assigned=04029_E_לא ניתן להשים את הארגומנט
% Only expressions which can be on the left side of an
% assignment can be passed as call by reference argument
% Remark: Properties can be only
% used on the left side of an assignment, but they cannot be used as arguments
type_e_cannot_local_proc_to_procvar=04030_E_לא ניתן לשייך פונקציה/שיגרה מקומית למשתנה מסוג שיגרה
% It's not allowed to assign a local procedure/function to a
% procedure variable, because the calling of local procedure/function is
% different. You can only assign local procedure/function to a void pointer.
type_e_no_assign_to_addr=04031_E_לא ניתן לשייך ערך לכתובת
% It is not allowed to assign a value to an address of a variable,constant,
% procedure or function. You can try compiling with -So if the identifier
% is a procedure variable.
type_e_no_assign_to_const=04032_E_לא ניתן לשייך ערך למשתנה קבוע
% It's not allowed to assign a value to a variable which is declared
% as a const. This is normally a parameter declared as const, to allow
% changing the value make the parameter as a value parameter or a var.
type_e_array_required=04033_E_נדרש משתנה מסוג מערך
% If you are accessing a variable using an index '[<x>]' then
% the type must be an array. In FPC mode also a pointer is allowed.
type_e_interface_type_expected=04034_E_מצפה לטיפוס מסוג ממשק, אבל התקבל "$1"
% The compiler expected to encounter an interface type name, but got something else.
% The following code would provoke this error:
% \begin{verbatim}
% Type
% TMyStream = Class(TStream,Integer)
% \end{verbatim}
type_h_mixed_signed_unsigned=04035_H_Mixing signed expressions and longwords gives a 64bit result
% If you divide (or calculate the modulus of) a signed expression by a longword (or vice versa),
% or if you have overflow and/or range checking turned on and use an arithmetic
% expression (+, -, *, div, mod) in which both signed numbers and longwords appear,
% then everything has to be evaluated in 64-bit arithmetic which is slower than normal
% 32-bit arithmetic. You can avoid this by typecasting one operand so it
% matches the result type of the other one.
type_w_mixed_signed_unsigned2=04036_W_ערבוב ביטויי סימנים ומספרים שלמים גבוהים עלול לגרום לשגיאת טווח מספרים
% If you use a binary operator (and, or, xor) and one of
% the operands is a longword while the other one is a signed expression, then,
% if range checking is turned on, you may get a range check error because in
% such a case both operands are converted to longword before the operation is
% carried out. You can avoid this by typecasting one operand so it
% matches the result type of the other one.
type_e_typecast_wrong_size_for_assignment=04037_E_ישנו הבדל בגודל בהצבה של typecast ($1-> $2)
% Type casting to a type with a different size is not allowed when the variable is
% used for assigning.
type_e_array_index_enums_with_assign_not_possible=04038_E_מניות עם תוכן של הצבה אינם יכולים לשמש בתור אינדקס למערך
% When you declared an enumeration type which has assignments in it, as in C,
% like in the following:
% \begin{verbatim}
% Tenum = (a,b,e:=5);
% \end{verbatim}
% you cannot use it as index of an array.
type_e_classes_not_related=04039_E_אין קירבה בין טיפוסי מחלקות או אובייקטים של "$1" ו "$2"
% There is a typecast from one class or object to another while the class/object
% are not related. This will probably lead to errors
type_w_classes_not_related=04040_W_אין קירבה בין טיפוסי המחלקות של "$1" ו "$2"
% There is a typecast from one class or object to another while the class/object
% are not related. This will probably lead to errors
type_e_class_or_interface_type_expected=04041_E_מצפה לטיפוסי מחלקות או ממשקים, אבל "$1" התקבל
% The compiler expected a class or interface name, but got another type or identifier.
type_e_type_is_not_completly_defined=04042_E_הטיפוס "$1" לא הוגדר במלואו
% This error occurs when a type is not complete: i.e. a pointer type which points to
% an undefined type.
type_w_string_too_long=04043_W_התוכן של המחרוזת מכיל יותר תווים ממה שניתן להכיל באורך של מחרוזת קצרה
% The size of the constant string, which is assigned to a shortstring,
% is longer than the maximum size of the shortstring
type_w_comparison_always_false=04044_W_Comparison might be always false due to range of constant and expression
% There is a comparison between a constant and an expression where the constant is out of the
% valid range of values of the expression. Because of type promotion, the statement will always evaluate to
% false. Explicitly typecast the constant or the expression to the correct range to avoid this warning
% if you think the code is correct.
type_w_comparison_always_true=04045_W_Comparison might be always true due to range of constant and expression
% There is a comparison between a constant and an expression where the constant is out of the
% valid range of values of the expression. Because of type promotion, the statement will always evaluate to
% true. Explicitly typecast the constant or the expression to the correct range to avoid this warning
% if you think the code is correct.
type_w_instance_with_abstract=04046_W_מאתחל את המחלקה "$1" עם מתודות לא ממומשות
% An instance of a class is created which contains non-implemented abstract
% methods. This will probably lead to a runtime error 211 in the code if that
% routine is ever called. All abstract methods should be overridden.
type_h_in_range_check=04047_H_הערך השמאלי של האופרנד IN צריך להיות בגודל של בית
% The left operand of the \var{in} operator is not an ordinal or enumeration which fits
% within 8-bits, this may lead to range check errors. The \var{in} operator
% currently only supports a left operand which fits within a byte. In the case of
% enumerations, the size of an element of an enumeration can be controlled with
% the \var{\{\$PACKENUM\}} or \var{\{\$Zn\}} switches.
type_w_smaller_possible_range_check=04048_W_גודל הטיפוס אינו מתאים, ישנה אפשרות לאיבוד מידע או שגיאה בבדיקת הטווח
% There is an assignment to a smaller type than the source type. This means that
% this may cause a range-check error, or may lead to possible loss of data.
type_h_smaller_possible_range_check=04049_H_גודל הטיפוס אינו מתאים, ישנה אפשרות לאיבוד מידע או שגיאה בבדיקת הטווח
% There is an assignment to a smaller type than the source type. This means that
% this may cause a range-check error, or may lead to possible loss of data.
type_e_cant_take_address_of_abstract_method=04050_E_לא ניתן לספק את כתובת המתודה המוגדרת כ abstract
% An abstract method has no body, so the address of an abstract method can't be taken.
type_e_assignment_not_allowed=04051_E_לא ניתן לשייך את הערך לפרמטרים רשמיים ומערכים פתוחים
% You are trying to assign a value to a formal (untyped var, const or out)
% parameter, or to an open array.
type_e_constant_expr_expected=04052_E_מצפה לביטוי קבוע
% The compiler expects an constant expression, but gets a variable expression.
type_e_operator_not_supported_for_types=04053_E_הפעולה "$1" אינה נתמכת לטיפוסים "$1" ו "$3"
% The operation is not allowed for the supplied types
type_e_illegal_type_conversion=04054_E_המרה לא חוקית של הטיפוס של "$1" ל "$2"
% When doing a type-cast, you must take care that the sizes of the variable and
% the destination type are the same.
type_h_pointer_to_longint_conv_not_portable=04055_H_ההמרה בין מספר למצביע אינה אפשרית בכל המערכות
% If you typecast a pointer to a longint (or vice-versa), this code will not compile
% on a machine using 64-bit for pointer storage.
type_w_pointer_to_longint_conv_not_portable=04056_W_ההמרה בין מספר למצביע אינה אפשרית בכל המערכות
% If you typecast a pointer to a ordinal type of a different size (or vice-versa), this can
% cause problems. This is a warning to help finding the 32bit specific code where cardinal/longint is used
% to typecast pointers to ordinals. A solution is to use the ptrint/ptruint types instead.
type_e_cant_choose_overload_function=04057_E_לא ניתן להחליט באיזו פונקצית עמוסת יתר להשתמש
% You're calling overloaded functions with a parameter that doesn't correspond
% to any of the declared function parameter lists. e.g. when you have declared
% a function with parameters \var{word} and \var{longint}, and then you call
% it with a parameter which is of type \var{integer}.
type_e_illegal_count_var=04058_E_משתנה ספירה לא חוקי
% The type of a \var{for} loop variable must be an ordinal type.
% Loop variables cannot be reals or strings.
type_w_double_c_varargs=04059_W_ממיר את הטיפוס real לטיפוס double למשתנה C. הוסף typecast ספציפי למנוע את המצב.
% In C, constant real values are double by default. For this reason, if you
% pass a constant real value to a variable argument part of a C function, FPC
% by default converts this constant to double as well. If you want to prevent
% this from happening, add an explicit typecast around the constant.
type_e_class_or_cominterface_type_expected=04060_E_מצפה לטיפוס מחלקה או ממשק COM, אבל התקבל "$1"
% Some operators like the AS operator are only appliable to classes or COM interfaces.
type_e_no_const_packed_array=04061_E_אין תמיכה במערך קבוע דחוס
% You cannot declare a (bit)packed array as a typed constant.
type_e_got_expected_packed_array=04062_E_חוסר תאימות לטיפוס הנתונים של ארגומנט $1. התקבל: "$2" מצא ל "(bit)packed array"
% The compiler expects a (bit)packed array as the specified parameter
type_e_got_expected_unpacked_array=04063_E_חוסר תאימות טיפוס הנתונים של ארגומנט $1. התקבל "$2" מצפה ל "(not packed) Array"
% The compiler expects a regular (i.e., not packed) array as the specified parameter
type_e_no_packed_inittable=04064_E_אלמטים של מערך דחוס אינם יכולים להיות מטיפוס נתונים אשר דורש אתחול
% Support for packed arrays of types that need initialization (such as ansistrings, or records which contain ansistrings) is not yet implemented.
type_e_no_const_packed_record=04065_E_אין תמיכה לרשומות ואבייקטים קבועים ודחוסים
% You cannot declare a (bit)packed array as a typed constant at this time.
type_w_untyped_arithmetic_unportable=04066_W_חישוב "$1" על טיפוס לא מוגדר של מצביע אינו נתמך במצב {$T+}, אך ניתן להשתמש בtypecast
% Addition/subtraction from untyped pointer may work differently in \var{\{\$T+\}}, use typecast to typed pointer
type_e_cant_take_address_of_local_subroutine=04076_E_לא ניתן לקחת את כתובת השיגרה המסומנת כמקומית
% The address of a subroutine marked as local can't be taken.
type_e_cant_export_local=04077_E_לא ניתן לייצא שיגרה המסומנת כמקומית בתוך יחידה
% A subroutine marked as local can't be export from a unit.
type_e_not_automatable=04078_E_הטיפוס אינו אוטומט: "$1"
% Only byte, integer, longint, smallint, currency, single, double, ansistring,
% widestring, tdatetime, variant, olevariant, wordbool and all interfaces are automatable.
type_h_convert_add_operands_to_prevent_overflow=04079_H_המרת האופרנד ל"$1" לפני פעולת החיבור, יכול למנוע שגיאות גלישה.
% Adding two types can cause overflow errors. Since you are converting the result to a larger type, you
% could prevent such errors by converting the operands to this type before doing the addition.
type_h_convert_sub_operands_to_prevent_overflow=04080_H_המרת האופרנד ל"$1" לפני פעולת החיבור יכולה למנוע שגיאות גלישה.
% Subtracting two types can cause overflow errors. Since you are converting the result to a larger type, you
% could prevent such errors by converting the operands to this type before doing the subtraction.
type_h_convert_mul_operands_to_prevent_overflow=04081_H_המרת האופרנד "$1" לפני פעולת הכפל יכולה למנוע שגיאות גלישה.
% Multiplying two types can cause overflow errors. Since you are converting the result to a larger type, you
% could prevent such errors by converting the operands to this type before doing the multiplication.
type_w_pointer_to_signed=04082_W_המרת מצביעים למספרים שלמים עם סימן עלולה לגרום לשגיאות בתוצאות השוואה ובטווחים. יש להשתמש במקום זאת בטיפוס ללא סימן.
% The virtual address space on 32-bit machines runs from \$00000000 to \$ffffffff. Many operating systems allow you to
% allocate memory above \$80000000, for example both Windows and Linux allow pointers in the range \$0000000 to \$bfffffff.
% If you convert pointers to signed types, this can cause overflow and range check errors, but also \$80000000 < \$7fffffff.
% This can cause random errors in code like "if p>q".
% \end{description}
#
# Symtable
#
# 05060 is the last used one
#
% \section{Symbol handling}
% This section lists all the messages that concern the handling of symbols.
% This means all things that have to do with procedure and variable names.
% \begin{description}
type_e_interface_has_no_guid=04083_E_Interface type $1 has no valid GUID
% When applying the as-operator to an interface or class, the desired interface (i.e. the right operand of the
% as-operator) must have a valid GUID.
type_e_invalid_objc_selector_name=04084_E_Invalid selector name "$1"
% An Objective-C selector cannot be empty, must be a valid identifier or a single colon,
% and if it contains at least one colon it must also end in one.
type_e_expected_objc_method_but_got=04085_E_Expected Objective-C method, but got $1
% A selector can only be created for Objective-C methods, not for any other kind
% of procedure/function/method.
type_e_expected_objc_method=04086_E_Expected Objective-C method or constant method name
% A selector can only be created for Objective-C methods, either by specifying
% the name using a string constant, or by using an Objective-C method identifier
% that is visible in the current scope.
type_e_no_type_info=04087_E_No type info available for this type
% Type information is not generated for some types, such as enumerations with gaps
% in their value range (this includes enumerations whose lower bound is different
% from zero).
type_e_ordinal_or_string_expr_expected=04088_E_Ordinal or string expression expected
% The expression must be an ordinal or string type.
type_e_string_expr_expected=04089_E_String expression expected
% The expression must be a string type.
type_w_zero_to_nil=04090_W_Converting 0 to NIL
% Use NIL rather than 0 when initialising a pointer.
type_e_protocol_type_expected=04091_E_Objective-C protocol type expected, but got "$1"
% The compiler expected a protocol type name, but found something else.
type_e_objc_type_unsupported=04092_E_The type "$1" is not supported for interaction with the Objective-C and the blocks runtime.
% Objective-C and Blocks make extensive use of run time type information (RTTI). This format
% is defined by the maintainers of the run time and can therefore not be adapted
% to all possible Object Pascal types. In particular, types that depend on
% reference counting by the compiler (such as ansistrings and certain kinds of
% interfaces) cannot be used as fields of Objective-C classes, cannot be
% directly passed to Objective-C methods or Blocks, and cannot be encoded using \var{objc\_encode}.
type_e_class_or_objcclass_type_expected=04093_E_Class or objcclass type expected, but got "$1"
% It is only possible to create class reference types of \var{class} and \var{objcclass}
type_e_objcclass_type_expected=04094_E_Objcclass type expected
% The compiler expected an \var{objcclass} type
type_w_procvar_univ_conflicting_para=04095_W_Coerced univ parameter type in procedural variable may cause crash or memory corruption: $1 to $2
% \var{univ} parameters are implicitly compatible with all types of the same size,
% also in procedural variable definitions. That means that the following code is
% legal, because \var{single} and \var{longint} have the same size:
% \begin{verbatim}
% {$mode macpas}
% Type
% TIntProc = procedure (l: univ longint);
%
% procedure test(s: single);
% begin
% writeln(s);
% end;
%
% var
% p: TIntProc;
% begin
% p:=test;
% p(4);
% end.
% \end{verbatim}
% This code may however crash on platforms that pass integers in registers and
% floating point values on the stack, because then the stack will be unbalanced.
% Note that this warning will not flag all potentially dangerous situations.
% when \var{test} returns.
type_e_generics_cannot_reference_itself=04096_E_Type parameters of specializations of generics cannot reference the currently specialized type
% Recursive specializations of generics like \var{Type MyType = specialize MyGeneric<MyType>;} are not possible.
type_e_type_parameters_are_not_allowed_here=04097_E_Type parameters are not allowed on non-generic class/record/object procedure or function
% Type parameters are only allowed for methods of generic classes, records or objects
type_e_generic_declaration_does_not_match=04098_E_Generic declaration of "$1" differs from previous declaration
% Generic declaration does not match the previous declaration
type_e_helper_type_expected=04099_E_Helper type expected
% The compiler expected a \var{class helper} type.
type_e_record_type_expected=04100_E_Record type expected
% The compiler expected a \var{record} type.
type_e_class_helper_must_extend_subclass=04101_E_Derived class helper must extend a subclass of "$1" or the class itself
% If a class helper inherits from another class helper the extended class must
% extend either the same class as the parent class helper or a subclass of it
type_e_record_helper_must_extend_same_record=04102_E_Derived record or type helper must extend "$1"
% If a record helper inherits from another record helper it must extend the same
% record that the parent record helper extended.
type_e_procedures_return_no_value=04103_E_Invalid assignment, procedures return no value
% This error occurs when one tries to assign the result of a procedure or destructor call.
% A procedure or destructor returns no value so this is not
% possible.
type_w_implicit_string_cast=04104_W_Implicit string type conversion from "$1" to "$2"
% An implicit type conversion from an ansi string type to an unicode string type is
% encountered. To avoid this warning perform an explicit type conversion.
type_w_implicit_string_cast_loss=04105_W_Implicit string type conversion with potential data loss from "$1" to "$2"
% An implicit type conversion from an unicode string type to an ansi string type is
% encountered. This conversion can lose data since not all unicode characters may be represented in the codepage of
% destination string type.
type_w_explicit_string_cast=04106_-W_Explicit string typecast from "$1" to "$2"
% An explicit typecast from an ansi string type to an unicode string type is
% encountered. This warning is off by default. You can turn it on to see all suspicious string conversions.
type_w_explicit_string_cast_loss=04107_-W_Explicit string typecast with potential data loss from "$1" to "$2"
% An explicit typecast from an unicode string type to an ansi string type is
% encountered. This conversion can lose data since not all unicode characters may be represented in the codepage of
% destination string type. This warning is off by default. You can turn it on to see all the places with lossy string
% conversions.
type_w_unicode_data_loss=04108_W_Unicode constant cast with potential data loss
% Conversion from a WideChar to AnsiChar can lose data since now all unicode characters may be represented in the current
% system codepage
% You can nest function definitions only 31 levels deep.
type_e_range_check_error_bounds=04109_E_range check error while evaluating constants ($1 must be between $2 and $3)
type_w_range_check_error_bounds=04110_W_range check error while evaluating constants ($1 must be between $2 and $3)
% The constants are outside their allowed range.
type_e_type_not_allowed_for_default=04111_E_This type is not supported for the Default() intrinsic
% Some types like for example Text and File Of X are not supported by the Default intrinsic.
type_e_java_class_method_not_static_virtual=04112_E_JVM virtual class methods cannot be static
% Virtual class methods cannot be static when targeting the JVM platform, because
% the self pointer is required for correct dispatching.
type_e_invalid_final_assignment=04113_E_Final (class) fields can only be assigned in their class' (class) constructor
% It is only possible to assign a value to a final (class) field inside a (class) constructor of its owning class.
type_e_no_managed_formal_assign_typecast=04114_E_It is not possible to typecast untyped parameters on managed platforms, simply assign a value to them instead.
% On managed platforms, untyped parameters are translated by the compiler into
% the equivalent of \var{var x: BaseClassType}. Non-class-based types passed to
% such parameters are automatically wrapped (or boxed) in a class, and after the
% call the potentially modified value is assigned back to the original variable.
% On the caller side, changing untyped var/out parameters happens by simply assigning
% values to them (either class-based or primitive ones). On the caller side,
% they will be extracted and if their type does not match the original variable's,
% an exception will be raised.
type_e_no_managed_assign_generic_typecast=04115_E_The assignment side of an expression cannot be typecasted to a supertype on managed platforms
% Managed platforms guarantee type safety at the bytecode level. This means that the virtual machine must be able
% to statically determine that no type-unsafe assignments or operations occur. By assigning a parent class type to a
% variable of a child type by typecasting the assignment side to the parent class type, the type safety would no
% longer be guaranteed and the generated code would fail verification at run time time.
type_w_interface_lower_visibility=04116_-W_The interface method "$1" raises the visibility of "$2" to public when accessed via an interface instance
type_e_interface_lower_visibility=04117_E_The interface method "$1" has a higher visibility (public) than "$2"
% All methods in an interface have always public visibility. That means that if
% an interface method is implemented using a (strict) protected or private method,
% this method is actually publicly accessible via the interface. On the JVM
% target this situation results in an error because the JVM rejects such
% attempts to circumvent the visibility rules. On other targets this is a
% warning that is disabled by default because such situations are common
% practice, but it can be enabled in case you are concerned with keeping your
% code compilable for the JVM target.
type_e_typeof_requires_vmt=04118_E_TYPEOF can only be used on object types with VMT
% Typeof() intrinsic returns pointer to VMT of its argument. It cannot be used on object types that do not have VMT.
type_e_invalid_default_value=04119_E_It is not possible to define a default value for a parameter of type "$1"
% Parameters declared as structured types, such as files, variants, non-dynamic
% arrays and TP-style objects, cannot have a default value.
type_e_type_not_allowed_for_type_helper=04120_E_Type "$1" cannot be extended by a type helper
% Types like procedural variables cannot be extended by type helpers
type_e_procedure_must_be_far=04121_E_Procedure or function must be far in order to allow taking its address: "$1"
% In certain i8086 memory models (medium, large and huge), procedures and functions
% have to be declared 'far' in order to allow their address to be taken.
type_w_instance_abstract_class=04122_W_Creating an instance of abstract class "$1"
% The specified class is declared as \var{abstract} and thus no instance of this class
% should be created. This is merely a warning for Delphi compatibility.
type_e_function_reference_kind=04123_E_Subroutine references cannot be declared as "of object" or "is nested", they can always refer to any kind of subroutine
% Subroutine references can refer to any kind of subroutine and hence do not
% require specialisation for methods or nested subroutines.
type_e_anonymous_function_unsupported=04999_E_Function references are not yet supported, only blocks (add "cdecl;" at the end)
% Remove this error message once Delphi-style anonymous are implemented. It has
% number 4999 so as not to result in a gap in the error message numbering once
% it's removed.
% \end{description}
#
# Symtable
#
# 05095 is the last used one
#
% \section{Symbol handling}
% This section lists all the messages that concern the handling of symbols.
% This means all things that have to do with procedure and variable names.
% \begin{description}
sym_e_id_not_found=05000_E_המזהה לא נמצא "$1"
% The compiler doesn't know this symbol. Usually happens when you misspel
% the name of a variable or procedure, or when you forgot to declare a
% variable.
sym_f_internal_error_in_symtablestack=05001_F_שגיאה פנימית בSymTableStack()
% An internal error occurred in the compiler; If you encounter such an error,
% please contact the developers and try to provide an exact description of
% the circumstances in which the error occurs.
sym_e_duplicate_id=05002_E_מזהה כפול "$1"
% The identifier was already declared in the current scope.
sym_h_duplicate_id_where=05003_H_המזהה כבר מוגדר ב$1 בשורה $2
% The identifier was already declared in a previous scope.
sym_e_unknown_id=05004_E_מזהה לא מוכר "$1"
% The identifier encountered has not been declared, or is used outside the
% scope where it is defined.
sym_e_forward_not_resolved=05005_E_הגדרת Forward לא ממומשת
% This can happen in two cases:
% \begin{itemize}
% \item This happens when you declare a function (in the \var{interface} part, or
% with a \var{forward} directive, but do not implement it.
% \item You reference a type which isn't declared in the current \var{type}
% block.
% \end{itemize}
sym_e_error_in_type_def=05007_E_שגיאה בהגדרת טיפוס
% There is an error in your definition of a new array type:
% \item One of the range delimiters in an array declaration is erroneous.
% For example, \var{Array [1..1.25]} will trigger this error.
sym_e_forward_type_not_resolved=05009_E_הגדרת הטיפוס לא הושלה "$1"
% A symbol was forward defined, but no declaration was encountered.
sym_e_only_static_in_static=05010_E_רק משתנים סטטיים יכולים להיות בשימוש עם מתודות סטטיות או מחוץ למטודות
% A static method of an object can only access static variables.
sym_e_type_must_be_rec_or_object_or_class=05012_E_Record or object or class type expected
% The variable or expression isn't of the type \var{record} or \var{object} or \var{class}.
sym_e_no_instance_of_abstract_object=05013_E_אדגם של מחלקות או אובייקטים עם מתודות abstract אינם מורשים
% You are trying to generate an instance of a class which has an abstract
% method that wasn't overridden.
sym_w_label_not_defined=05014_W_התווית "$1" אינה מוגדרת
% A label was declared, but not defined.
sym_e_label_used_and_not_defined=05015_E_התווית "$1" בשימוש, אבל לא מגדרת
% A label was declared and used, but not defined.
sym_e_ill_label_decl=05016_E_הגדרת תווית לא חוקית
% This error should never happen; it occurs if a label is defined outside a
% procedure or function.
sym_e_goto_and_label_not_supported=05017_E_GOTO ו LABEL אינם נתמכים (השתמש במתג -Sg)
% You must compile a program which has \var{label}s and \var{goto} statements
% with the \var{-Sg} switch. By default, \var{label} and \var{goto} aren't
% supported.
sym_e_label_not_found=05018_E_התווית לא נמצאה
% A \var{goto label} was encountered, but the label isn't declared.
sym_e_id_is_no_label_id=05019_E_המזהה אינו תווית
% The identifier specified after the \var{goto} isn't of type label.
sym_e_label_already_defined=05020_E_התווית כבר הוגדרה
% You are defining a label twice. You can define a label only once.
sym_e_ill_type_decl_set=05021_E_הגדרת טיפוס סידרה לא חוקית
% The declaration of a set contains an invalid type definition.
sym_e_class_forward_not_resolved=05022_E_הגדרה מקדימה של מחלקה "$1" לא ממומשת
% You declared a class, but you did not implement it.
sym_n_unit_not_used=05023_H_היחידה "$1" אינה בשימוש ב $2
% The unit referenced in the \var{uses} clause is not used.
sym_h_para_identifier_not_used=05024_H_הפרמטר "$1" אינו בשימוש
% The identifier was declared (locally or globally) but
% was not used (locally or globally).
sym_n_local_identifier_not_used=05025_N_המשתנה המקומי "$1" אינו בשימוש
% You have declared, but not used a variable in a procedure or function
% implementation.
sym_h_para_identifier_only_set=05026_H_הערך של הפרמטר "$1" הוזן אך הוא לא בשימוש
% The identifier was declared (locally or globally)
% set but not used (locally or globally).
sym_n_local_identifier_only_set=05027_N_הערך של הפרמטר "$1" הוזן אך הוא לא בשימוש
% The variable in a procedure or function
% implementation is declared, set but never used.
sym_h_local_symbol_not_used=05028_H_$1 "$2" מקומי לא בשימוש
% A local symbol is never used.
sym_n_private_identifier_not_used=05029_N_שדה פרטי "$1.$2" לא בשימוש
% The indicated private field is defined, but is never used in the code.
sym_n_private_identifier_only_set=05030_N_השדה הפרטי "$1.$2" בעל ערך, אך לא בשימוש
% The indicated private field is declared, assigned but never read.
sym_n_private_method_not_used=05031_N_המתודה הפרטית "$1.$2" אינה בשימוש
% The indicated private method is declared but is never used in the code.
sym_e_set_expected=05032_E_מצפה לטיפוס סדרה
% The variable or expression is not of type \var{set}. This happens in an
% \var{in} statement.
sym_w_function_result_not_set=05033_W_הפונקציה כנראה לא מחזירה ערך
% You can get this warning if the compiler thinks that a function return
% value is not set. This will not be displayed for assembler procedures,
% or procedures that contain assembler blocks.
sym_w_wrong_C_pack=05034_W_הטיפוס "$1" אינו מייושר נכון לרשומה של שפת C
% Arrays with sizes not multiples of 4 will be wrongly aligned
% for C structures.
sym_e_illegal_field=05035_E_שדה של רשומה לא חוקי "$1"
% The field doesn't exist in the record/object definition.
sym_w_uninitialized_local_variable=05036_W_המשתנה המקומי "$1" אינו נראה מאותחל
% This message is displayed if the compiler thinks that a variable will
% be used (i.e. appears in the right-hand-side of an expression) when it
% was not initialized first (i.e. appeared in the left-hand side of an
% assigment)
sym_w_uninitialized_variable=05037_W_המשתנה "$1" אינו נראה מאותחל
% This message is displayed if the compiler thinks that a variable will
% be used (i.e. appears in the right-hand-side of an expression) when it
% was not initialized first (i.e. appeared in the left-hand side of an
% assigment)
sym_e_id_no_member=05038_E_המזהה בשימוש אינו חבר ב"$1"
% This error is generated when an identifier of a record,
% field, or method is accessed while it is not defined.
sym_h_param_list=05039_H_נמצאה ההכרזה: $1
% You get this when you use the \var{-vh} switch. In case an overloaded
% procedure is not found, then all candidate overloaded procedures are
% listed, with their parameter lists.
sym_e_segment_too_large=05040_E_גודל המידע של האלמנט גדול מידי
% You get this when you declare a data element whose size exceeds the
% prescribed limit (2 Gb on 80386+/68020+ processors)
sym_e_no_matching_implementation_found=05042_E_לא נמצא ביצוע למתודה "$1" של הממשק
% There was no matching method found which could implement the interface
% method. Check argument types and result type of the methods.
sym_w_deprecated_symbol=05043_W_הסימול "$1" מיושן
% This means that a symbol (a variable, routine, etc...) which is
% declared as \var{deprecated} is used. Deprecated symbols may no longer
% be available in newer versions of the unit / library. Usage of this symbol
% should be avoided as much as possible.
sym_w_non_portable_symbol=05044_W_הסימול "$1" אינו נייד
% This means that a symbol (a variable, routine, etc...) which is
% declared as \var{platform} is used. This symbol's value, usage
% and availability is platform specific and should not be used
% if the source code must be portable.
sym_w_non_implemented_symbol=05055_W_הסימול "$1" אינו מבוצע
% This means that a symbol (a variable, routine, etc...) which is
% declared as \var{unimplemented} is used. This symbol is defined,
% but is not yet implemented on this specific platform.
sym_e_cant_create_unique_type=05056_E_לא ניתן ליצור טיפוס ייחודי מהטיפוס הנוכחי
% Only simple types like ordinal, float and string types are supported when
% redefining a type with \var{type newtype = type oldtype;}.
sym_h_uninitialized_local_variable=05057_H_המשתנה המקומי "$1" אינו נראה מאותחל
% This message is displayed if the compiler thinks that a variable will
% be used (i.e. appears in the right-hand-side of an expression) when it
% was not initialized first (i.e. appeared in the left-hand side of an
% assigment)
sym_h_uninitialized_variable=05058_H_המשתנה "$1" אינו נראה מאותחל
% This message is displayed if the compiler thinks that a variable will
% be used (i.e. appears in the right-hand-side of an expression) when it
% was not initialized first (i.e. appeared in the left-hand side of an
% assigment)
sym_w_function_result_uninitialized=05059_W_הערך המוחזר מהפונקציה אינו נראה כמאותחל
% This message is displayed if the compiler thinks that the function result
% variable will be used (i.e. appears in the right-hand-side of an expression)
% before it is initialized (i.e. appeared in the left-hand side of an
% assigment)
sym_h_function_result_uninitialized=05060_H_הערך המוחזר מהפונקציה אינו נראה כמאותחל
% This message is displayed if the compiler thinks that the function result
% variable will be used (i.e. appears in the right-hand-side of an expression)
% before it is initialized (i.e. appeared in the left-hand side of an
% assigment)
sym_w_identifier_only_read=05061_W_המשתנה "$1" נקרא, אך מעולם לא קיבל תוכן
% You have read the value of a variable, but nowhere assigned a value to
% it.
sym_h_abstract_method_list=05062_H_נמצאה מתודה מופשטת: $1
% When getting a warning about constructing a class/object with abstract methods
% you get this hint to find the affected method.
% \end{description}
#
# Codegenerator
#
# 06040 is the last used one
#
% \section{Code generator messages}
% This section lists all messages that can be displayed if the code
% generator encounters an error condition.
% \begin{description}
sym_w_experimental_symbol=05063_W_Symbol "$1" is experimental
% This means that a symbol (a variable, routine, etc...) which is
% declared as \var{experimental} is used. Experimental symbols
% might disappear or change semantics in future versions. Usage of this symbol
% should be avoided as much as possible.
sym_w_forward_not_resolved=05064_W_Forward declaration "$1" not resolved, assumed external
% This happens if you declare a function in the \var{interface} of a unit in macpas mode,
% but do not implement it.
sym_w_library_symbol=05065_W_Symbol "$1" is belongs to a library
% This means that a symbol (a variable, routine, etc...) which is
% declared as \var{library} is used. Library symbols may not be
% available in other libraries.
sym_w_deprecated_symbol_with_msg=05066_W_Symbol "$1" is deprecated: "$2"
% This means that a symbol (a variable, routine, etc...) which is
% declared as \var{deprecated} is used. Deprecated symbols may no longer
% be available in newer versions of the unit / library. Use of this symbol
% should be avoided as much as possible.
sym_e_no_enumerator=05067_E_Cannot find an enumerator for the type "$1"
% This means that compiler cannot find an appropriate enumerator to use in the for-in loop.
% To create an enumerator you need to define an operator enumerator or add a public or published
% GetEnumerator method to the class or object definition.
sym_e_no_enumerator_move=05068_E_Cannot find a "MoveNext" method in enumerator "$1"
% This means that compiler cannot find a public MoveNext method with the Boolean return type in
% the enumerator class or object definition.
sym_e_no_enumerator_current=05069_E_Cannot find a "Current" property in enumerator "$1"
% This means that compiler cannot find a public Current property in the enumerator class or object
% definition.
sym_e_objc_para_mismatch=05070_E_Mismatch between number of declared parameters and number of colons in message string.
% In Objective-C, a message name automatically contains as many colons as parameters.
% In order to prevent mistakes when specifying the message name in FPC, the compiler
% checks whether this is also the case here. Note that in case of messages taking a
% variable number of arguments translated to FPC via an \var{array of const} parameter,
% this final \var{array of const} parameter is not counted. Neither are the hidden
% \var{self} and \var{\_cmd} parameters.
sym_n_private_type_not_used=05071_N_Private type "$1.$2" never used
% The indicated private type is declared but is never used in the code.
sym_n_private_const_not_used=05072_N_Private const "$1.$2" never used
% The indicated private const is declared but is never used in the code.
sym_n_private_property_not_used=05073_N_Private property "$1.$2" never used
% The indicated private property is declared but is never used in the code.
sym_w_deprecated_unit=05074_W_Unit "$1" is deprecated
% This means that a unit which is
% declared as \var{deprecated} is used. Deprecated units may no longer
% be available in newer versions of the library. Use of this unit
% should be avoided as much as possible.
sym_w_deprecated_unit_with_msg=05075_W_Unit "$1" is deprecated: "$2"
% This means that a unit which is
% declared as \var{deprecated} is used. Deprecated units may no longer
% be available in newer versions of the library. Use of this unit
% should be avoided as much as possible.
sym_w_non_portable_unit=05076_W_Unit "$1" is not portable
% This means that a unit which is
% declared as \var{platform} is used. This unit use
% and availability is platform specific and should not be used
% if the source code must be portable.
sym_w_library_unit=05077_W_Unit "$1" is belongs to a library
% This means that a unit which is
% declared as \var{library} is used. Library units may not be
% available in other libraries.
sym_w_non_implemented_unit=05078_W_Unit "$1" is not implemented
% This means that a unit which is
% declared as \var{unimplemented} is used. This unit is defined,
% but is not yet implemented on this specific platform.
sym_w_experimental_unit=05079_W_Unit "$1" is experimental
% This means that a unit which is
% declared as \var{experimental} is used. Experimental units
% might disappear or change semantics in future versions. Usage of this unit
% should be avoided as much as possible.
sym_e_formal_class_not_resolved=05080_E_No complete definition of the formally declared class "$1" is in scope
% Objecive-C and Java classes can be imported formally, without using the unit in which it is fully declared.
% This enables making forward references to such classes and breaking circular dependencies amongst units.
% However, as soon as you wish to actually do something with an entity of this class type (such as
% access one of its fields, send a message to it, or use it to inherit from), the compiler requires the full definition
% of the class to be in scope.
sym_e_interprocgoto_into_init_final_code_not_allowed=05081_E_Gotos into initialization or finalization blocks of units are not allowed
% Gotos into initialization or finalization blockse of units are not allowed.
sym_e_external_class_name_mismatch1=05082_E_Invalid external name "$1" for formal class "$2"
sym_e_external_class_name_mismatch2=05083_E_Complete class definition with external name "$1" here
% When a class is declared using a formal external definition, the actual external
% definition (if any) must specify the same external name as the formal definition
% (since both definitions refer to the same actual class type).
sym_w_library_overload=05084_W_Possible library conflict: symbol "$1" from library "$2" also found in library "$3"
% Some OS do not have library specific namespaces, for those
% OS, the function declared as "external 'libname' name 'funcname'",
% the 'libname' part is only a hint, funcname might also be loaded
% by another library. This warning appears if 'funcname' is used twice
% with two different library names.
sym_e_duplicate_id_create_java_constructor=05085_E_Cannot add implicit constructor 'Create' because identifier already used by "$1"
% Java does not automatically add inherited constructors to child classes, so that they can be hidden.
% However, if a class does not explicitly declare at least one constructor, the compiler is
% required to add a public, parameterless constructor. In Java, constructors are nameless,
% but in FPC they are all called ``Create''. Therefore, if you do not add a constructor to
% a Java class and furthermore use the ``Create'' identifier for another entity (e.g., a field,
% or a parameterless method), the compiler cannot satisfy this requirement.
sym_e_no_matching_inherited_parameterless_constructor=05086_E_Cannot generate default constructor for class, because parent has no parameterless constructor
% Java does not automatically add inherited constructors to child classes, so that they can be hidden.
% However, if a class does not explicitly declare at least one constructor, the compiler is
% required to add a public, parameterless constructor. This compiler must then call
% the parameterless constructor from the parent class inside this added constructor.
% This is however impossible if the parent class does not declare such a constructor.
% In this case you must add a valid constructor yourself.
sym_d_adding_helper_for=05087_D_Adding helper for $1
% A helper for the mentioned type is added to the current scope
sym_e_param_list=05088_E_Found declaration: $1
% This message shows all overloaded declarations in case of an error.
sym_w_uninitialized_managed_local_variable=05089_W_Local variable "$1" of a managed type does not seem to be initialized
% This message is displayed if the compiler thinks that a variable will
% be used (i.e. it appears in the right-hand side of an expression) when it
% was not initialized first (i.e. appeared in the left-hand side of an
% assignment). Since the variable is managed, i. e. implicitly initialized by the compiler, this might be intended behaviour and
% does not necessarily mean that the code is wrong.
sym_w_uninitialized_managed_variable=05090_W_Variable "$1" of a managed type does not seem to be initialized
% This message is displayed if the compiler thinks that a variable will
% be used (i.e. it appears in the right-hand side of an expression) when it
% was not initialized first (i.e. appeared in the left-hand side of an
% assignment). Since the variable is managed, i. e. implicitly initialized by the compiler, this might be intended behaviour and
% does not necessarily mean that the code is wrong.
sym_h_uninitialized_managed_local_variable=05091_H_Local variable "$1" of a managed type does not seem to be initialized
% This message is displayed if the compiler thinks that a variable will
% be used (i.e. it appears in the right-hand side of an expression) when it
% was not initialized first (i.e. it did not appear in the left-hand side of an
% assignment). Since the variable is managed, i. e. implicitly initialized by the compiler, this might be intended behaviour and
% does not necessarily mean that the code is wrong.
sym_h_uninitialized_managed_variable=05092_H_Variable "$1" of a managed type does not seem to be initialized
% This message is displayed if the compiler thinks that a variable will
% be used (i.e. it appears in the right-hand side of an expression) when it
% was not initialized first (i.e. t did not appear in the left-hand side of an
% assignment). Since the variable is managed, i. e. implicitly initialized by the compiler, this might be intended behaviour and
% does not necessarily mean that the code is wrong.
sym_w_managed_function_result_uninitialized=05093_W_function result variable of a managed type does not seem to initialized
% This message is displayed if the compiler thinks that the function result
% variable will be used (i.e. it appears in the right-hand side of an expression)
% before it is initialized (i.e. before it appeared in the left-hand side of an
% assignment). Since the variable is managed, i. e. implicitly initialized by the compiler, this might be intended behaviour and
% does not necessarily mean that the code is wrong.
sym_h_managed_function_result_uninitialized=05094_H_Function result variable of a managed type does not seem to be initialized
% This message is displayed if the compiler thinks that the function result
% variable will be used (i.e. it appears in the right-hand side of an expression)
% before it is initialized (i.e. it appears in the left-hand side of an
% assignment). Since the variable is managed, i. e. implicitly initialized by the compiler, this might be intended behaviour and
% does not necessarily mean that the code is wrong.
sym_w_duplicate_id=05095_W_Duplicate identifier "$1"
% The identifier was already declared in an Objective-C category that's in the
% same scope as the current identifier. This is a warning instead of an error,
% because while this hides the identifier from the category, there are often
% many unused categories in scope.
% \end{description}
#
# Codegenerator
#
# 06049 is the last used one
#
% \section{Code generator messages}
% This section lists all messages that can be displayed if the code
% generator encounters an error condition.
% \begin{description}
cg_e_parasize_too_big=06009_E_הגודר של רשימת פרמטרים גדולה מ 65535 בתים
% The I386 processor limits the parameter list to 65535 bytes (the \var{RET}
% instruction causes this)
cg_e_file_must_call_by_reference=06012_E_טיפוס של קובץ חייב להיות משתנה מוגדר
% You cannot specify files as value parameters, i.e. they must always be
% declared \var{var} parameters.
cg_e_cant_use_far_pointer_there=06013_E_השימוש במצביע far אינו מורשה במיקום הנוכחי
% Free Pascal doesn't support far pointers, so you cannot take the address of
% an expression which has a far reference as a result. The \var{mem} construct
% has a far reference as a result, so the following code will produce this
% error:
% \begin{verbatim}
% var p : pointer;
% ...
% p:=@mem[a000:000];
% \end{verbatim}
cg_e_dont_call_exported_direct=06015_E_לא ניתן לקרוא לפונקציות עם הגדרת EXPORT
% No longer in use.
cg_w_member_cd_call_from_method=06016_W_כנראה קריאה לא חוקית של יוצר או הורס
% The compiler detected that a constructor or destructor is called within a
% a method. This will probably lead to problems, since constructors / destructors
% require parameters on entry.
cg_n_inefficient_code=06017_N_חסר קוד
% Your statement seems dubious to the compiler.
cg_w_unreachable_code=06018_W_לא ניתן להריץ את קטע הקוד
% You specified a construct which will never be executed. Example:
% \begin{verbatim}
% while false do
% begin
% {.. code ...}
% end;
% \end{verbatim}
cg_e_cant_call_abstract_method=06020_E_לא ניתן לקרוא למתודות Abstract בצורה ישירה
% You cannot call an abstract method directy, instead you must call a
% overriding child method, because an abstract method isn't implemented.
cg_d_register_weight=06027_DL_Register $1 משקל $2 $3
% Debugging message. Shown when the compiler considers a variable for
% keeping in the registers.
cg_d_stackframe_omited=06029_DL_משמיט את מסגרת המחסנית
% Some procedure/functions do not need a complete stack-frame, so it is omitted.
% This message will be displayed when the {-vd} switch is used.
cg_e_unable_inline_object_methods=06031_E_מתודות של אובייקט או מחלקה אינם יכולים להיות inline
% You cannot have inlined object methods.
cg_e_unable_inline_procvar=06032_E_קריאות Procvar אינם יכולים להיות inline
% A procedure with a procedural variable call cannot be inlined.
cg_e_no_code_for_inline_stored=06033_E_אין קוד לפרוצדורות inline
% The compiler couldn't store code for the inline procedure.
cg_e_can_access_element_zero=06035_E_אלמנט האפס של ansi/wide- או longstring לא נגיש, השתמש ב (set)length במקום
% You should use \var{setlength} to set the length of an ansi/wide/longstring
% and \var{length} to get the length of such a string types
cg_e_cannot_call_cons_dest_inside_with=06037_E_לא ניתן לקרוא ליוצרים או הורסים בתוך חלק של 'with'
% Inside a \var{with} clause you cannot call a constructor or destructor for the
% object you have in the \var{with} clause.
cg_e_cannot_call_message_direct=06038_E_לא ניתן לקרוא למתודות של מטפל הודאות בצורה ישירה
% A message method handler method cannot be called directly if it contains an
% explicit self argument
cg_e_goto_inout_of_exception_block=06039_E_קפיצה אל תוך או מחוץ לבלוק של exception
% It is not allowed to jump in or outside of an exception block like \var{try..finally..end;}:
% \begin{verbatim}
% label 1;
%
% ...
%
% try
% if not(final) then
% goto 1; // this line will cause an error
% finally
% ...
% end;
% 1:
% ...
% \end{verbatim}
cg_e_control_flow_outside_finally=06040_E_השימוש בביטויים השולטים בזרימת הקוד אינם מורשים בחלק ה finally
% It isn't allowed to use the control flow statements \var{break},
% \var{continue} and \var{exit}
% inside a finally statement. The following example shows the problem:
% \begin{verbatim}
% ...
% try
% p;
% finally
% ...
% exit; // This exit ISN'T allowed
% end;
% ...
%
% \end{verbatim}
% If the procedure \var{p} raises an exception the finally block is
% executed. If the execution reaches the exit, it's unclear what to do:
% exiting the procedure or searching for another exception handler
cg_w_parasize_too_big=06041_W_גודל הפרמטים גולש את ההגבלות של חלק מהמעבדים
% This indicates that you are declaring more than 64K of parameters, which
% might not be supported on other processor targets.
cg_w_localsize_too_big=06042_W_הגודל של המשתנה המקומי גולש מהגבלות של חלק מהמעבדים
% This indicates that you are declaring more than 32K of local variables, which
% might not be supported on other processor targets.
cg_e_localsize_too_big=06043_E_גודל משתנים מקומיים גולש מהגבלות הנתמכות
% This indicates that you are declaring more than 32K of local variables, which
% is not supported by this processor.
cg_e_break_not_allowed=06044_E_BREAK אינו מורשה
% You're trying to use \var{break} outside a loop construction.
cg_e_continue_not_allowed=06045_E_CONTINUE אינו מורשה
% You're trying to use \var{continue} outside a loop construction.
cg_f_unknown_compilerproc=06046_F_compilerproc "$1" לא ידוע. בדוק אם השתמש בספריית זמן הריצה הנכונה.
% The compiler expects that the runtime library contains certain subroutines. If you see this error
% and you didn't change the runtime library code, it's very likely that the runtime library
% you're using doesn't match the used compiler. If you changed the runtime library this error means
% that you removed a subroutine which the compiler needs for internal use.
cg_f_unknown_system_type=06047_F_לא ניתן למצוא טיפוס מערכת "$1". בדוק האם אתה משתמש בספריית זמן הריצה עדכנית.
% The compiler expects that the runtime library contains certain type definitions. If you see this error
% and you didn't change the runtime library code, it's very likely that the runtime library
% you're using doesn't match the used compiler. If you changed the runtime library this error means
% that you removed a type which the compiler needs for internal use.
cg_h_inherited_ignored=06048_H_מתעלם מהשימוש בinherited במתודה מסוג abstract
% This messages appears only in Delphi mode when you call an abstract method
% of a parent class via \var{inherited;}. The call is then ignored.
cg_e_goto_label_not_found=06049_E_תווית ה Goto "$1" לא הוגדרה או לא עברה אופטימיזציה
% The label used in the goto definition is not defined or optimized away by the
% unreachable code elemination.
% \end{description}
# EndOfTeX
#
# Assembler reader
#
# 07105 is the last used one
#
cg_f_unknown_type_in_unit=06050_F_Cannot find type "$1" in unit "$2". Check if you use the correct run time library.
% The compiler expects that the runtime library contains certain type definitions. If you see this error
% and you didn't change the runtime library code, it's very likely that the runtime library
% you're using doesn't match the compiler in use. If you changed the runtime library this error means
% that you removed a type which the compiler needs for internal use.
cg_e_interprocedural_goto_only_to_outer_scope_allowed=06051_E_Interprocedural gotos are allowed only to outer subroutines
% Gotos between subroutines are only allowed if the goto jumps from an inner to an outer subroutine or
% from a subroutine to the main program
cg_e_labels_cannot_defined_outside_declaration_scope=06052_E_Label must be defined in the same scope as it is declared
% In ISO mode, labels must be defined in the same scope as they are declared.
cg_e_goto_across_procedures_with_exceptions_not_allowed=06053_E_Leaving procedures containing explicit or implicit exceptions frames using goto is not allowed
% Non-local gotos might not be used to leave procedures using exceptions either implicitly or explicitly. Procedures
% which use automated types like ansistrings or class constructurs are affected by this too.
cg_e_mod_only_defined_for_pos_quotient=06054_E_In ISO mode, the mod operator is defined only for positive quotient
% In ISO pascal, only positive values are allowed for the quotient: \var{n mod m} is only valid if \var{m>0}.
cg_d_autoinlining=06055_DL_Auto inlining: $1
% Due to auto inlining turned on, the compiler auto inlines this subroutine.
cg_e_function_not_support_by_selected_instruction_set=06056_E_The function used, is not supported by the selected instruction set: $1
% Some functions cannot be implemented efficiently for certain instruction sets, one example is fused multiply/add.
% To avoid very inefficient code, the compiler complains in this case, so either select another instruction set
% or replace the function call by alternative code
cg_f_max_units_reached=06057_F_Maximum number of units ($1) reached for the current target
% Depending of target architecture, the number of units is limited. This limit
% has been reached. A unit counts only if it contains initialization or finalization count.
%
% \end{description}
# EndOfTeX
#
# Assembler reader
#
# 07125 is the last used one
#
asmr_d_start_reading=07000_DL_מתחיל בסגנון מפרש אסמבלר $1
% This informs you that an assembler block is being parsed
asmr_d_finish_reading=07001_DL_הסתיים ניתוח סגנון אסמבלר $1
% This informs you that an assembler block has finished.
asmr_e_none_label_contain_at=07002_E_תבנית ללא תווית מכילה את התו @
% A identifier which isn't a label can't contain a @.
asmr_e_building_record_offset=07004_E_שגיאה בבניית היסט הרשומה
% An error occurred while building the offset of a record/object
% structure, this can happend when there is no field specified at all or
% an unknown field identifier is used.
asmr_e_offset_without_identifier=07005_E_נעשה שימוש בOFFSET ללא מזהה
% You can only use OFFSET with an identifier. Other syntaxes aren't
% supported
asmr_e_type_without_identifier=07006_E_נעשה שימוש בTYPE ללא מזהה
% You can only use TYPE with an identifier. Other syntaxes aren't
% supported
asmr_e_no_local_or_para_allowed=07007_E_לא ניתן להשתמש במשתמה מקומי או פרמטר במיקום הנוכחי
% You can't use a local variable or parameter here, mostly because the
% addressing of locals and parameters is done using the frame pointer register so the
% address can't be obtained directly.
asmr_e_need_offset=07008_E_יש צורך להשתמש ב OFFSET
% You need to use OFFSET <id> here to get the address of the identifier.
asmr_e_need_dollar=07009_E_יש צורך להשתמש ב$
% You need to use $<id> here to get the address of the identifier.
asmr_e_cant_have_multiple_relocatable_symbols=07010_E_לא ניתן להשתמש ב relocatable symbols מרובים
% You can't have more than one relocatable symbol (variable/typed constant)
% in one argument.
asmr_e_only_add_relocatable_symbol=07011_E_ניתן להוסיף רק relocatable symbol
% Relocatable symbols (variable/typed constant) can't be used with other
% operators. Only addition is allowed.
asmr_e_invalid_constant_expression=07012_E_ביטוי קבוע לא חוקי
% There is an error in the constant expression.
asmr_e_relocatable_symbol_not_allowed=07013_E_Relocatable symbol אינו מורשה
% You can't use a relocatable symbol (variable/typed constant) here.
asmr_e_invalid_reference_syntax=07014_E_תחביר הפניות לא חוקי
% There is an error in the reference.
asmr_e_local_para_unreachable=07015_E_לא ניתן לגשת ל $1 מהקוד
% You can not read directly the value of a local variable or parameter
% of a higher level procedure in assembler code (except for
% local assembler code without parameter nor locals).
asmr_e_local_label_not_allowed_as_ref=07016_E_סימולים/תוויות מקומיות אינם מורשים כהפניות
% You can't use local symbols/labels as references
asmr_e_wrong_base_index=07017_E_שימוש שגוי בבסיס ואינדקס של אוגר
% There is an error with the base and index register, they are
% probably incorrect
asmr_w_possible_object_field_bug=07018_W_יתכן כי יש שגיאה בטיפול השדות של אובייקט
% Fields of objects or classes can be reached directly in normal or objfpc
% modes but TP and Delphi modes treat the field name as a simple offset.
asmr_e_wrong_scale_factor=07019_E_צויין טווח סולם שגוי
% The scale factor given is wrong, only 1,2,4 and 8 are allowed
asmr_e_multiple_index=07020_E_שימוש מרובה באינקס האוגר
% You are trying to use more than one index register
asmr_e_invalid_operand_type=07021_E_טיפוס אופרנד שגוי
% The operand type doesn't match with the opcode used
asmr_e_invalid_string_as_opcode_operand=07022_E_אשימוש במחרוזת כאופרנד opcode שגוי: $1
% The string specified as operand is not correct with this opcode
asmr_w_CODE_and_DATA_not_supported=07023_W_השימוש ב@CODE ו@DATA לא נתמך
% @CODE and @DATA are unsupported and are ignored.
asmr_e_null_label_ref_not_allowed=07024_E_התייחסות לתווית ריקה אינה מורשת
asmr_e_expr_zero_divide=07025_E_חילוק באפס בהערכת asm
% There is a division by zero in a constant expression
asmr_e_expr_illegal=07026_E_ביטוי לא חוקי
% There is an illegal expression in a constant expression
asmr_e_escape_seq_ignored=07027_E_מתעלם מרצף קידוד: $1
% There is a C-styled string, but the escape sequence in the string
% is unknown, and is therefore ignored
asmr_e_invalid_symbol_ref=07028_E_התייחסות סימול לא תקינה
asmr_w_fwait_emu_prob=07029_W_FWAIT מסוגל לגרום לבעיות חיקוי בemu387
asmr_w_fadd_to_faddp=07030_W_$1 ללא תרגום אופרנד ל$1P
asmr_w_enter_not_supported_by_linux=07031_W_הוראת ENTER אינה נתמכת ע"י ליבת Linux
% ENTER instruction can generate a stack page fault that is not
% caught correctly by the i386 Linux page handler.
asmr_w_calling_overload_func=07032_W_מבצע קריאה לפונקציה משוכתבת בassembler
% There is a call to an overloaded method in the assembler block,
% this might be the sign there is a problem
asmr_e_unsupported_symbol_type=07033_E_טיפוס הסימול של האופרנד אינו נתמך
asmr_e_constant_out_of_bounds=07034_E_תוכן הקבוע מחוץ לגבולות
asmr_e_error_converting_decimal=07035_E_שגיאה בזמן המרה דצימלית $1
% A constant decimal value does not have the correct syntax
asmr_e_error_converting_octal=07036_E_שגיאה בזמן המרה אוקטלית $1
% A constant octal value does not have the correct syntax
asmr_e_error_converting_binary=07037_E_שגיאה בזמן המרה בינרית $1
% A constant binary value does not have the correct syntax
asmr_e_error_converting_hexadecimal=07038_E_שגיאה בזמן המרה הקסה-דצימלית $1
% A constant hexadecimal value does not have the correct syntax
asmr_h_direct_global_to_mangled=07039_H_$1 תורגם ל $2
asmr_w_direct_global_is_overloaded_func=07040_W_$1 משוייך לפונקציה משוכתבת
asmr_e_cannot_use_SELF_outside_a_method=07041_E_לא ניתן להשתמש ב SELF מחוץ למתודה
% There is a reference to the \var{self} symbol while it is not
% allowed. \var{self} can only be referenced inside methods
asmr_e_cannot_use_OLDEBP_outside_nested_procedure=07042_E_לא ניתן להשתמש ב OLDEBP מחוץ לפרוצדורה מקוננת
% There is a reference to the \var{oldebp} symbol while it is not
% allowed. \var{oldebp} can only be referenced inside nested routines
asmr_e_void_function=07043_W_פרוצדורות אינם יכולים להחזיר ערך בתוך קוד assembly
% Trying to return a value while in a procedure. A procedure
% does not have any return value
asmr_e_SEG_not_supported=07044_E_SEG אינו נתמך
asmr_e_size_suffix_and_dest_dont_match=07045_E_גודל סופי ויעד, או מקור הגודל אינם תואמים
% The register size and the opcode size suffix don't match. This is
% probably an error in the assembler statement
asmr_w_size_suffix_and_dest_dont_match=07046_W_גודל סופי ויעד, או מקור הגודל אינם תואמים
% The register size and the opcode size suffix don't match. This is
% probably an error in the assembler statement
asmr_e_syntax_error=07047_E_שגיאה בתחביר Assembler
% There is an assembler syntax error
asmr_e_invalid_opcode_and_operand=07048_E_שילוב לא חוקי בין opcode ואופרנד
% The opcode cannot be used with this type of operand
asmr_e_syn_operand=07049_E_שגיאה בתחביר אופרנד בAssembler
asmr_e_syn_constant=07050_E_שגיאה בתחביר קבוע בAssembler
asmr_e_invalid_string_expression=07051_E_ביטוי מחרוזת לא תקין
asmr_w_const32bit_for_address=07052_W_הקבוע בעל הסימול $1 לכתובת, הוא לא מצביע
% A constant expression represents an address which does not fit
% into a pointer. The address is probably incorrect
asmr_e_unknown_opcode=07053_E_opcode $1 אינו מוכר
% This opcode is not known
asmr_e_invalid_or_missing_opcode=07054_E_opcode חסר או לא תקין
asmr_e_invalid_prefix_and_opcode=07055_E_שילוב של תחילית וopcode לא תקין : $1
asmr_e_invalid_override_and_opcode=07056_E_השילוב של שכתוב וopcode לא תקין: $1
asmr_e_too_many_operands=07057_E_Too many operands on line
% There are too many operands for this opcode. Check your
% assembler syntax
asmr_w_near_ignored=07058_W_מתעלם מNEAR
asmr_w_far_ignored=07059_W_מתעלם מ FAR
asmr_e_dup_local_sym=07060_E_שיכפול של הסימול המקומי $1
asmr_e_unknown_local_sym=07061_E_הסימול המקומי $1 אינו מוגדר
asmr_e_unknown_label_identifier=07062_E_מזהה תווית $1 לא ידוע
asmr_e_invalid_register=07063_E_שם אוגר שגוי
% There is an unknown register name used as operand.
asmr_e_invalid_fpu_register=07064_E_שם אוגר לנקודה צפה לא תקין
% There is an unknown register name used as operand.
asmr_w_modulo_not_supported=07066_W_מודולו לא נתמך
asmr_e_invalid_float_const=07067_E_קבוע של נקודה צפה לא תקין $1
% The floating point constant declared in an assembler block is
% invalid.
asmr_e_invalid_float_expr=07068_E_ביטוי לא תקין של נקודה צפה
% The floating point expression declared in an assembler block is
% invalid.
asmr_e_wrong_sym_type=07069_E_סוג סימול שגוי
asmr_e_cannot_index_relative_var=07070_E_לא ניתן לשמור ציון של פרמטר או משתנה מקומי עם אוגר
% Trying to index using a base register a symbol which is already relative
% to a register. This is not possible, and will probably lead to crashes.
asmr_e_invalid_seg_override=07071_E_ביטוי המיקטע המשוכתב אינו תקין
asmr_w_id_supposed_external=07072_W_המזהה $1 אינו נמצא, מניח שהמזהה חיצוני
% There is a reference to an undefined symbol. This will not result
% in an error, since the symbol might be external, but may cause
% problems at link time if the symbol is not defined anywhere.
asmr_e_string_not_allowed_as_const=07073_E_המחרוזות אינן מורשות להיות קבועות
% Character strings are not allowed as constants.
asmr_e_no_var_type_specified=07074_לא צויין טיפוס המשתנה
% The syntax expects a type idenfitifer after the dot, but
% none was found.
asmr_w_assembler_code_not_returned_to_text=07075_E_קוד הassembler לא חזר לאיזור הטקסט
% There was a directive in the assembler block to change sections,
% but there is a missing return to the text section at the end
% of the assembler block. This might cause errors during link time.
asmr_e_not_directive_or_local_symbol=07076_E_$1 הוא לא הנחיה או סימול מקומי
% This symbol is unknown.
asmr_w_using_defined_as_local=07077_E_משתמש בהגדרת השם כתווית מקומית
asmr_e_dollar_without_identifier=07078_E_השימוש בתו הדולר מתבצע ללא מזהה
% A constant expression has an identifier which does not start with
% the $ symbol.
asmr_w_32bit_const_for_address=07079_W_מספק כתובת של 32 סיביות לקבוע
% A constant was used as an address. This is probably an error,
% since using absolute addresses will probably not work.
asmr_n_align_is_target_specific=07080_N_השימוש ב.align מבוסס על סוג יעד, השתמש ב.balign או .p2align
% Using the .align directive is platform specific, and its meaning will vary
% from one platform to another.
asmr_e_cannot_access_field_directly_for_parameters=07081_E_לא ניתן להשתמש בצורה ישירה בשדות של פרמטרים
% You should load the parameter first into a register and then access the
% fields using that register.
asmr_e_cannot_access_object_field_directly=07082_E_לא ניתן לגשת בצורה ישירה לשדות של אובייקטים/מחלקות
% You should load the self pointer first into a register and then access the
% fields using the register as base. By default the self pointer is available
% in the esi register on i386.
asmr_e_unable_to_determine_reference_size=07083_E_לא ניתן לקבוע את גודל האופרנדים ללא ציון של הגודל
% You should specify explicitly a size for the reference, because
% the compiler is unable to determine what size (byte,word,dword,etc.) it
% should use for the reference.
asmr_e_cannot_use_RESULT_here=07084_E_לא ניתן להשתמש בRESULT בפונקציה הנוכחית
% Some functions which return complex types cannot use the \var{result}
% keyword.
asmr_w_adding_explicit_args_fXX=07086_W_"$1" ללא תרגום של אופרנדים ל "$1 %st,%st(1)"
asmr_w_adding_explicit_first_arg_fXX=07087_W_"$1 %st(n)" תורגם ל "$1 %st,%st(n)"
asmr_w_adding_explicit_second_arg_fXX=07088_W_"$1 %st(n)" תורגם ל "$1 %st(n),%st"
asmr_e_invalid_char_smaller=07089_E_התו > אינו מורשה כאן
% The shift operator requires the << characters. Only one
% of those characters was found.
asmr_e_invalid_char_greater=07090_E_התו < אינו מורשה כאן
% The shift operator requires the >> characters. Only one
% of those characters was found.
asmr_w_align_not_supported=07093_W_ALIGN אינו נתמך
asmr_e_no_inc_and_dec_together=07094_E_השימוש INC ו DEC אינם יכולים להגיע בייחד
% Trying to use an increment and a decrement within the same
% opcode on the 680x0. This is impossible.
asmr_e_invalid_reg_list_in_movem=07095_E_שימוש בreglist ל movem לא תקין
% Trying to use the \var{movem} opcode with invalid registers
% to save or restore.
asmr_e_invalid_reg_list_for_opcode=07096_E_שימוש שגוי בreglist לopcode
asmr_e_higher_cpu_mode_required=07097_E_זקוק למצב מעבד גבוהה יותר ($1)
% Trying to use an instruction which is not supported in the current
% cpu mode. Use a higher cpu generation to be able to use this
% opcode in your assembler block
asmr_w_unable_to_determine_reference_size_using_dword=07098_W_לא צויין גודל של אופרנד ולא ניתן לנחש את הגודל, משתמש בDWORD כברירת מחדל
% You should specify explicitly a size for the reference, because
% the compiler is unable to determine what size (byte,word,dword,etc.) it
% should use for the reference. This warning is only used in Delphi mode where
% it falls back to use DWORD as default.
asmr_e_illegal_shifterop_syntax=07099_E_שגיאת תחביר בעת ניסיון לפרש הסטת אופרנד
% ARM only; ARM assembler supports a so called shifter operand. The used syntax isn't
% a valid shifter operand. Example for an operation with shifter operand:
% \begin{verbatim}
% asm
% orr r2,r2,r2,lsl #8
% end;
% \end{verbatim}
asmr_e_packed_element=07100_E_הכתובת של רכיב ארוז אינו נמצא בטווח של בית
% Packed components (record fields and array elements) may start at an arbitrary
% bit inside a byte. On CPU which do not support bit-addressable memory (which
% includes all currently supported CPUs by FPC) you will therefore get an error
% message when trying to index arrays with elements whose size is not a multiple
% of 8 bits. The same goes for accessing record fields with such an address.
% multiple of 8 bits.
asmr_w_unable_to_determine_reference_size_using_byte=07101_W_לא צויין גודל, והמהדר אינו מצליח לקבוע את גודל האופרנד, משתמש בגודל BYTE בתור ברירת מחדל
% You should specify explicitly a size for the reference, because
% the compiler is unable to determine what size (byte,word,dword,etc.) it
% should use for the reference. This warning is only used in Delphi mode where
% it falls back to use BYTE as default.
asmr_w_no_direct_ebp_for_parameter=07102_W_לא ניתן להשתמש ב+הסט(%ebp) במיקום הנוכי עבור הפרמטרים
% Using direct 8(%ebp) reference for function/procedure parameters is invalid
% if parameters are in registers.
asmr_w_direct_ebp_for_parameter_regcall=07103_W_השימוש ב+הסט(%ebp) אינו תואם עם מוסכמות ה regcall
% Using direct 8(%ebp) reference for function/procedure parameters is invalid
% if parameters are in registers.
asmr_w_direct_ebp_neg_offset=07104_W_השימוש ב-הסט(%ebp) אינו מומלץ עבור גישה למשתנים מקומיים
% Using -8(%ebp) to access a local variable is not recommended
asmr_w_direct_esp_neg_offset=07105_W_השימוש ב-הסט(%ebp) עלול לגרום לקריסה של התוכנית או לאיבוד המידע
% Using -8(%esp) to access a local stack is not recommended, as
% this stack portion can be overwritten by any function calls or interrupts.
asmr_e_no_vmtoffset_possible=07106_E_השימוש ב VMTOffset חייב להגיע בשילוב של מתודות ווירטואליות ו "$1" אינו ווירטואלי
% \end{verbatim}
#
# Assembler/binary writers
#
# 08018 is the last used one
#
asmr_e_need_pic_ref=07107_E_Generating PIC, but reference is not PIC-safe
% The compiler has been configured to generate position-independent code
% (PIC), but there are position-dependent references in the current
% handwritten assembler instruction.
asmr_e_mixing_regtypes=07108_E_All registers in a register set must be of the same kind and width
% Instructions on the ARM architecture that take a register set as argument require that all registers
% in this set are of the same kind (e.g., integer, vfp) and width (e.g., single precision, double precision).
asmr_e_empty_regset=07109_E_A register set cannot be empty
% Instructions on the ARM architecture that take a register set as argument require that such a set
% contains at least one register.
asmr_w_useless_got_for_local=07110_W_@GOTPCREL is useless and potentially dangerous for local symbols
% The use of @GOTPCREL supposes an extra indirection that is
% not present if the symbol is local, which might lead to wrong assembler code
asmr_w_general_segment_with_constant=07111_W_Constant with general purpose segment register
% General purpose register should not have constant offsets
% as OS memory allocation might not be compatible with that.
asmr_e_bad_seh_directive_offset=07112_E_Invalid offset value for $1
% Win64 SEH directives have certain restrictions on possible offset values, e.g. they should
% be positive and have 3 or 4 low bits clear.
asmr_e_bad_seh_directive_register=07113_E_Invalid register for $1
% Win64 SEH directives accept only 64-bit integer registers or XMM registers.
asmr_e_seh_in_pure_asm_only=07114_E_SEH directives are allowed only in pure assembler procedures
% Win64 SEH directives are allowed only in pure assembler procedures, not in assembler
% blocks of regular procedures.
asmr_e_unsupported_directive=07115_E_Directive "$1" is not supported for the current target
asmr_e_complex_function_result_location=07116_E_This function's result location cannot be encoded directly in a single operand when "nostackframe" is used
% Functions declared with the \var{nostackframe} modifier do not have a stack frame, and hence
% do not have a local variable to hold the temporary function result. Accesses to the function
% result in such routines directly go to the registers or memory location that will be used
% to return their result to the caller. In some cases this result may be spread over multiple
% registers, in which case it is not possible to access the location via its symbolic name.
% You have to directly use the appropriate register names in this case.
asmr_e_wrong_gotpcrel_intel_syntax=07117_E_GOTPCREL references in Intel assembler syntax cannot contain a base or index register, and their offset must 0.
% The syntax for a gotpcrel PIC memory expression in Intel assembler syntax is
% \verb*[global_symbol wrt ..gotpcrel]*
asmr_e_no_gotpcrel_support=07118_E_The current target does not support GOTPCREL relocations
% Not all targets support position-independent code using a global offset table.
% Use a different way to access symbols in a position-indepent way in these cases.
asmr_w_global_access_without_got=07119_W_Exported/global symbols should be accessed via the GOT
% Global symbols (symbols from the unit interface, or defined in a program
% or library) should be accessed via the GOT when generating position-indepent code.
asmr_w_check_mem_operand_size=07120_W_Check size of memory operand "$1"
% The size of memory operand is possible invalid. This is
% probably an error in the assembler statement
asmr_w_check_mem_operand_size3=07121_W_Check size of memory operand "$1: memory-operand-size is $2 bits, but expected [$3 bits]"
% The size of memory operand is possible invalid. This is
% probably an error in the assembler statement
asmr_w_check_mem_operand_size_offset=07122_W_Check size of memory operand "$1: memory-operand-size is $2 bits, but expected [$3 bits + $4 byte offset]"
% The size of memory operand is possible invalid. This is
% probably an error in the assembler statement
asmr_w_check_mem_operand_negative_offset=07123_W_Check "$1: offset of memory operand is negative "$2 byte"
% The offset of memory operand is possible invalid. This is
% probably an error in the assembler statement
asmr_w_check_mem_operand_automap_multiple_size=07124_W_Check "$1: size of memory operand is empty, but es exists different definitions of the memory size =>> map to $2 (smallest option)"
% The size of memory operand is empty and we have different definitions of possible memory sizes. Check it!
asmr_e_invalid_ref_register=07125_E_Invalid register used in memory reference expression: "$1"
% FPU, vector and sometimes integer registers cannot be used in memory reference
% expressions, due to limitations of the cpu architecture or simple because
% it is not meaningful.
#
# Assembler/binary writers
#
# 08029 is the last used one
#
asmw_f_too_many_asm_files=08000_F_יותר מידי קבצי assembler
% With smartlinking enabled, there are too many assembler
% files generated. Disable smartlinking.
asmw_f_assembler_output_not_supported=08001_F_סוג הפלט של הassembler אינו נתמך
asmw_f_comp_not_supported=08002_F_Comp אינו נתמך
asmw_f_direct_not_supported=08003_F_מצב ישיר של assembler אינו נתמך ע"י כותבים בינאריים
% Direct assembler mode is not supported for binary writers.
asmw_e_alloc_data_only_in_bss=08004_E_אתחול המידע מורשה רק בחלק הbss
asmw_f_no_binary_writer_selected=08005_F_לא נבחר כותב בינארי
asmw_e_opcode_not_in_table=08006_E_Asm: Opcode $1 הוא לא טבלה
asmw_e_invalid_opcode_and_operands=08007_E_Asm: $1 הינו שילוב שגוי בין opcode לבין אופרנד
asmw_e_16bit_not_supported=08008_E_Asm: התייחסות של 16 סיביות אינו נתמך
asmw_e_invalid_effective_address=08009_E_Asm: מען בפעול לא תקין
asmw_e_immediate_or_reference_expected=08010_E_Asm: מצפה להתייחסות לאופרנד או אופרנד מידי
asmw_e_value_exceeds_bounds=08011_E_Asm: $1 גולש מהגבולות $2
asmw_e_short_jmp_out_of_range=08012_E_Asm: Short jump מחוץ לטווח $1
asmw_e_undefined_label=08013_E_Asm: תווית לא מוגדרת $1
asmw_e_comp_not_supported=08014_E_Asm: הטיפוס COMP לא נתמך ביעד המבוקש
asmw_e_extended_not_supported=08015_E_Asm: הטיפוס Extended אינו נתמך ביעד המבוקש
asmw_e_duplicate_label=08016_E_Asm: תוויות כפולה $1
asmw_e_redefined_label=08017_E_Asm: מגדיר מחדש את התווית $1
asmw_e_first_defined_label=08018_E_Asm: מוגדר כאן לראשונה
asmw_e_invalid_register=08019_E_Asm: אוגר שגוי $1
asmw_e_16bit_32bit_not_supported=08020_E_Asm: ההתייחסות ל16 או 32 סיביות אינה נתמכת
asmw_e_64bit_not_supported=08021_E_Asm: האופרנט 64 סיביות אינו נתמך
#
# Executing linker/assembler
#
# 09034 is the last used one
#
# BeginOfTeX
%
% \section{Errors of assembling/linking stage}
% This section lists errors that occur when the compiler is processing the
% command line or handling the configuration files.
% \begin{description}
asmw_e_bad_reg_with_rex=08022_E_Asm: AH,BH,CH or DH cannot be used in an instruction requiring REX prefix
% x86_64 only: instruction encoding of this platform does not allow using
% 8086 high byte registers (AH,BH,CH or DH) together with REX prefix in a single instruction.
% The REX prefix is required whenever the instruction operand size is 64 bits, or
% when it uses one of extended x86_64 registers (R8-R15 or XMM8-XMM15).
asmw_e_missing_endprologue=08023_E_Missing .seh_endprologue directive
% x86_64-win64 only: Normally, SEH directives are handled internally by compiler.
% However, in pure assembler procedures .seh_endprologue directive is required
% if other SEH directives are present.
asmw_e_prologue_too_large=08024_E_Function prologue exceeds 255 bytes
% x86_64-win64: .seh_prologue directive must be placed within 255 bytes from function start.
asmw_e_handlerdata_no_handler=08025_E_.seh_handlerdata directive without preceding .seh_handler
% x86_64-win64: If .seh_handlerdata directive is used, then a .seh_handler directive must be
% present earlier in the same function.
asmw_f_too_many_relocations=08026_F_Relocation count for section $1 exceeds 65535
% Legacy COFF targets limit number of relocations per section to 65535 because they use a 2-byte field
% to store the relocation count. Targets using newer PECOFF format do not have this limitation.
asmw_w_changing_bind_type=08027_N_Change of bind type of symbol $1 from $2 to $3 after use
asmw_h_changing_bind_type=08028_H_Change of bind type of symbol $1 from $2 to $3 after use
% An assembler symbol bind type has been altered after use, which can lead to wrong code.
% First version is reserved for changig to local label, which is the most probable cause
% of wrong code generation, but currently set to Note level as it appears inside
% the compiler compilation.
asmw_e_32bit_not_supported=08029_E_Asm: 32 Bit references not supported
#
# Executing linker/assembler
#
# 09035 is the last used one
#
# BeginOfTeX
%
% \section{Errors of assembling/linking stage}
% This section lists errors that occur when the compiler is processing the
% command line or handling the configuration files.
% \begin{description}
exec_w_source_os_redefined=09000_W_מקור מערכת ההפעלה מוגדר מחדש
% The source operating system is redefined.
exec_i_assembling_pipe=09001_I_מרכיב (צינור) $1
% Assembling using a pipe to an external assembler.
exec_d_cant_create_asmfile=09002_E_לא ניתן ליצור את קובץ הassembler $1
% The mentioned file can't be created. Check if you have got
% access permissions to create this file
exec_e_cant_create_objectfile=09003_E_לא ניתן ליצור את קובץ אובייקט $1
% The mentioned file can't be created. Check if you've
% got access permissions to create this file
exec_e_cant_create_archivefile=09004_E_לא ניתן ליצור את קובץ הארכיון $1
% The mentioned file can't be created. Check if you've
% access permissions to create this file
exec_e_assembler_not_found=09005_E_המקשר $1 אינו נמצא, עובר למאסף חיצוני
% The assembler program was not found. The compiler will produce a script that
% can be used to assemble and link the program.
exec_t_using_assembler=09006_T_משתמש במאסף: $1
% Information message saying which assembler is being used.
exec_e_error_while_assembling=09007_E_שגיאה בזמן איסוף קוד יציאה $1
% There was an error while assembling the file using an external assembler.
% Consult the documentation of the assembler tool to find out more information
% on this error.
exec_e_cant_call_assembler=09008_E_לא ניתן להריץ את המאסף, שגיאה $1, מריץ מאסף חיצוני
% An error occurred when calling an external assembler, The compiler will produce a script that
% can be used to assemble and link the program.
exec_i_assembling=09009_I_מקשר $1
% An informational message stating which file is being assembled.
exec_i_assembling_smart=09010_I_אוסף עם smartlinking $1
% An informational message stating which file is being assembled using smartlinking.
exec_w_objfile_not_found=09011_W_האובייקט $1 לא נמצא, נראה שהאיסוף יכשל !
% One of the object file is missing, and linking will probably fail.
% Check your paths.
exec_w_libfile_not_found=09012_W_הספרייה $1 לא נמצאה, נראה שהאיסוף יכשל !
% One of the library file is missing, and linking will probably fail.
% Check your paths.
exec_e_error_while_linking=09013_E_שגיאה בזמן קישור
% Generic error while linking.
exec_e_cant_call_linker=09014_E_לא ניתן להריץ את המקשר, עובר למקשר חיצוני
% An error occurred when calling an external linker, The compiler will produce a script that
% can be used to assemble and link the program.
exec_i_linking=09015_I_מקשר $1
% An informational message, showing which program or library is being linked.
exec_e_util_not_found=09016_E_הכלי $1 לא נמצא, עובר למקשר חיצוני
% An external tool was not found, the compiler will produce a script that
% can be used to assemble and link or postprocess the program.
exec_t_using_util=09017_T_משתמש בכלי $1
% An informational message, showing which external program (usually a postprocessor) is being used.
exec_e_exe_not_supported=09018_E_אין תמיכה ביצירת קבצי ריצה
% Creating executable programs is not supported for this platform, because it was
% not yet implemented in the compiler.
exec_e_dll_not_supported=09019_E_אין תמיכה ביצירת ספריות דינמיות/משותפות
% Creating dynamically loadable libraries is not supported for this platform, because it was
% not yet implemented in the compiler.
exec_e_static_lib_not_supported=09035_E_Creation of Static Libraries not supported
% Creating static libraries is not supported for this platform, because it was
% not yet implemented in the compiler.
exec_i_closing_script=09020_I_סוגר את התסריט $1
% Informational message showing when the external assembling an linking script is finished.
exec_e_res_not_found=09021_E_מהדר משאבים לא נמצא, עובר למצב חיצוני
% An external resource compiler was not found, the compiler will produce a script that
% can be used to assemble, compile resources and link or postprocess the program.
exec_i_compilingresource=09022_I_מהדר את המשאב $1
% An informational message, showing which resource is being compiled.
exec_t_unit_not_static_linkable_switch_to_smart=09023_T_לא ניתן לקשר את היחידה $1 בצורה סטטית, עובר לקישור חכם
% Statical linking was requested, but a unit which is not statically linkable was used.
exec_t_unit_not_smart_linkable_switch_to_static=09024_T_לא ניתן לקשר בצורה חכמה את היחידה $1, עובר לקישור סטטי
% Smart linking was requested, but a unit which is not smart-linkable was used.
exec_t_unit_not_shared_linkable_switch_to_static=09025_T_לא ניתן לקשר את היחידה $1 בקישור משותף, עובר לקישור סטטי
% Shared linking was requested, but a unit which is not shared-linkable was used.
exec_e_unit_not_smart_or_static_linkable=09026_E_לא ניתן לקשר את היחידה $1 בקישור חכם או בקישור סטטי
% Smart or static linking was requested, but a unit which cannot be used for either was used.
exec_e_unit_not_shared_or_static_linkable=09027_E_לא ניתן לקשר את היחידה $1 בקישור משותף או סטטי
% Shared or static linking was requested, but a unit which cannot be used for either was used.
exec_d_resbin_params=09028_D_מריץ את מהדר המשאבים "$1" עם "$2" בתור שורת פקודה
% An informational message showing which command-line is used for the resource compiler.
%\end{description}
# EndOfTeX
#
# Executable information
#
# BeginOfTeX
% \section{Executable information messages.}
% This section lists all messages that the compiler emits when an executable program is produced,
% and only when the internal linker is used.
% \begin{description}
exec_e_error_while_compiling_resources=09029_E_Error while compiling resources
% The resource compiler or converter returned an error.
exec_e_cant_call_resource_compiler=09030_E_Can't call the resource compiler "$1", switching to external mode
% An error occurred when calling a resource compiler. The compiler will produce
% a script that can be used to assemble, compile resources and link or
% postprocess the program.
exec_e_cant_open_resource_file=09031_E_Can't open resource file "$1"
% An error occurred resource file cannot be opened.
exec_e_cant_write_resource_file=09032_E_Can't write resource file "$1"
% An error occurred resource file cannot be written.
exec_n_backquote_cat_file_not_found=09033_N_File "$1" not found for backquoted cat command
% The compiler did not find the file that should be expanded into linker parameters
exec_w_init_file_not_found=09034_W_"$1" not found, this will probably cause a linking failure
% The compiler adds certain startup code files to the linker only when they are found.
% If they are not found, they are not added and this might cause a linking failure.
%
%\end{description}
# EndOfTeX
#
# Executable information
#
# 09134 is the last used one
#
# BeginOfTeX
% \section{Executable information messages.}
% This section lists all messages that the compiler emits when an executable program is produced,
% and only when the internal linker is used.
% \begin{description}
execinfo_f_cant_process_executable=09128_F_לא מצליח לבצע מעבר סופי על קובץ ההרצה $1
% Fatal error when the compiler is unable to post-process an executable.
execinfo_f_cant_open_executable=09129_F_לא מצליח לפתוח את קובץ הריצה $1
% Fatal error when the compiler cannot open the file for the executable.
execinfo_x_codesize=09130_X_גודל הקוד: $1 בתים
% Informational message showing the size of the produced code section.
execinfo_x_initdatasize=09131_X_הגודל של מידע מאותחל: $1 בתים
% Informational message showing the size of the initialized data section.
execinfo_x_uninitdatasize=09132_X_מידע של מידע לא מאותחל: $1 בתים
% Informational message showing the size of the uninitialized data section.
execinfo_x_stackreserve=09133_X_גודל המחסנית השמורה: $1 בתים
% Informational message showing the stack size that the compiler reserved for the executable.
execinfo_x_stackcommit=09134_X_גודל המחסנית בשימוש: $1 בתים
% Informational message showing the stack size that the compiler commites for the executable.
%\end{description}
# EndOfTeX
#
# Unit loading
#
# 10041 is the last used one
#
# BeginOfTeX
% \section{Unit loading messages.}
% This section lists all messages that can occur when the compiler is
% loading a unit from disk into memory. Many of these messages are
% informational messages.
% \begin{description}
link_f_executable_too_big=09200_F_Executable image size is too big for $1 target.
% Fatal error when resulting executable is too big.
link_w_32bit_absolute_reloc=09201_W_Object file "$1" contains 32-bit absolute relocation to symbol "$2".
% Warning when 64-bit object file contains 32-bit absolute relocations.
% In such case an executable image can be loaded into lower 4Gb of
% address space only.
%\end{description}
# EndOfTeX
#
# Unit loading
#
# 10062 is the last used one
#
# BeginOfTeX
% \section{Unit loading messages.}
% This section lists all messages that can occur when the compiler is
% loading a unit from disk into memory. Many of these messages are
% informational messages.
% \begin{description}
unit_t_unitsearch=10000_T_מחפש את היחידה: $1
% When you use the \var{-vt}, the compiler tells you where it tries to find
% unit files.
unit_t_ppu_loading=10001_T_טוען את קובץ ה PPU $1
% When the \var{-vt} switch is used, the compiler tells you
% what units it loads.
unit_u_ppu_name=10002_U_שם ה PPU: $1
% When you use the \var{-vu} flag, the unit name is shown.
unit_u_ppu_flags=10003_U_דגלי PPU: $1
% When you use the \var{-vu} flag, the unit flags are shown.
unit_u_ppu_crc=10004_U_PPU Crc: $1
% When you use the \var{-vu} flag, the unit CRC check is shown.
unit_u_ppu_time=10005_U_זמן PPU: $1
% When you use the \var{-vu} flag, the time the unit was compiled is shown.
unit_u_ppu_file_too_short=10006_U_קובץ הPPU קצר מידי
% The ppufile is too short, not all declarations are present.
unit_u_ppu_invalid_header=10007_U_הראש של קובץ ה PPU אינו תקין (הקובץ אינו מכיל PPU בהתחלה)
% A unit file contains as the first three bytes the ascii codes of \var{PPU}
unit_u_ppu_invalid_version=10008_U_גרסה לא תקינה של הPPU $1
% This unit file was compiled with a different version of the compiler, and
% cannot be read.
unit_u_ppu_invalid_processor=10009_U_קובץ הPPU הודר למעבד אחר
% This unit file was compiled for a different processor type, and
% cannot be read
unit_u_ppu_invalid_target=10010_U_קובץ הPPU הודר למטרה אחרת
% This unit file was compiled for a different target, and
% cannot be read
unit_u_ppu_source=10011_U_מקור הPPU: $1
% When you use the \var{-vu} flag, the unit source file name is shown.
unit_u_ppu_write=10012_U_כותב $1
% When you specify the \var{-vu} switch, the compiler will tell you where it
% writes the unit file.
unit_f_ppu_cannot_write=10013_F_לא כותב את קובץ ה PPU
% An error occurred when writing the unit file.
unit_f_ppu_read_error=10014_F_שגיאה בזמן קריאת קובץ ה PPU
% This means that the unit file was corrupted, and contains invalid
% information. Recompilation will be necessary.
unit_f_ppu_read_unexpected_end=10015_F_סוף קובץ לא צפוי (קובץ PPU)
% Unexpected end of file. This may mean that the PPU file is
% corrupted.
unit_f_ppu_invalid_entry=10016_F_כניסה לא תקינה בקובץ ה PPU: $1
% The unit the compiler is trying to read is corrupted, or generated with a
% newer version of the compiler.
unit_f_ppu_dbx_count_problem=10017_F_בעיה בספירת Dbx בקובץ PPU
% There is an inconsistency in the debugging information of the unit.
unit_e_illegal_unit_name=10018_E_שם יחידה לא תקין: $1
% The name of the unit does not match the file name.
unit_f_too_much_units=10019_F_יותר מידי יחידות
% \fpc has a limit of 1024 units in a program. You can change this behavior
% by changing the \var{maxunits} constant in the \file{fmodule.pas} file of the
% compiler, and recompiling the compiler.
unit_f_circular_unit_reference=10020_F_קריאה מעגלית בין היחידות $1 ו $2
% Two units are using each other in the interface part. This is only allowed
% in the \var{implementation} part. At least one unit must contain the other one
% in the \var{implementation} section.
unit_f_cant_compile_unit=10021_F_אין מספיק משאבים על מנת להדר את היחידה $1
% A unit was found that needs to be recompiled, but no sources are
% available.
unit_f_cant_find_ppu=10022_F_לא מוצא את היחידה $1
% You tried to use a unit of which the PPU file isn't found by the
% compiler. Check your configuration file for the unit paths
unit_w_unit_name_error=10023_W_היחידה $1 לא נמצאה, אבל $2 קיים
% This error message is no longer used.
unit_f_unit_name_error=10024_F_מחפש את היחידה $1, אבל $2 נמצא
% Dos truncation of 8 letters for unit PPU files
% may lead to problems when unit name is longer than 8 letters.
unit_w_switch_us_missed=10025_W_הידור יחידת system דורשת את המתג -Us
% When recompiling the system unit (it needs special treatment), the
% \var{-Us} must be specified.
unit_f_errors_in_unit=10026_F_עוצר לאחר שנמצאו $1 שגיאות בזמן הידור המודול
% When the compiler encounters a fatal error or too many errors in a module
% then it stops with this message.
unit_u_load_unit=10027_U_טוען $1 ($2) יחידה $3
% When you use the \var{-vu} flag, which unit is loaded from which unit is
% shown.
unit_u_recompile_crc_change=10028_U_מהדר את $1 לאחר שהחתימה שונתה ל $2
% The unit is recompiled because the checksum of a unit it depends on has
% changed.
unit_u_recompile_source_found_alone=10029_U_נמצא רק קוד מקור, מהדר מחדש את $1
% When you use the \var{-vu} flag, these messages tell you why the current
% unit is recompiled.
unit_u_recompile_staticlib_is_older=10030_U_מהדר מחדש את היחידה. הספרייה הסטטית ישנה יותר מקובץ ה PPU
% When you use the \var{-vu} flag, the compiler warns if the static library
% of the unit are older than the unit file itself.
unit_u_recompile_sharedlib_is_older=10031_U_מהדר מחדש את היחידה. הספרייה המשותפת ישנה יותר מקובץ ה PPU
% When you use the \var{-vu} flag, the compiler warns if the shared library
% of the unit are older than the unit file itself.
unit_u_recompile_obj_and_asm_older=10032_U_מהדר מחדש את ה היחידה. קבצי ה obj והasm ישנים יותר מקובץ ה PPU
% When you use the \var{-vu} flag, the compiler warns if the assembler or
% object file of the unit are older than the unit file itself.
unit_u_recompile_obj_older_than_asm=10033_U_מהדר מחדש את היחידה. קובץ הobj ישן יותר מקובץ הasm
% When you use the \var{-vu} flag, the compiler warns if the assembler
% file of the unit is older than the object file of the unit.
unit_u_parsing_interface=10034_U_מפרש את חלק הממשק של $1
% When you use the \var{-vu} flag, the compiler warns that it starts
% parsing the interface part of the unit
unit_u_parsing_implementation=10035_U_מפרש את חלק הביצועי של $1
% When you use the \var{-vu} flag, the compiler warns that it starts
% parsing the implementation part of the unit
unit_u_second_load_unit=10036_U_טעינה שנייה של היחידה $1
% When you use the \var{-vu} flag, the compiler warns that it starts
% recompiling a unit for the second time. This can happend with interdepend
% units.
unit_u_check_time=10037_U_בדיקת קובץ PPU $1 זמן $2
% When you use the \var{-vu} flag, the compiler show the filename and
% date and time of the file which a recompile depends on
### The following two error msgs is currently disabled.
#unit_h_cond_not_set_in_last_compile=10038_H_התנאים של $1 לא הוגדרו בהתחלת הריצה בהידור האחרון של $2
#% when recompilation of an unit is required the compiler will check that
#% the same conditionals are set for the recompiliation. The compiler has
#% found a conditional that currently is defined, but was not used the last
#% time the unit was compiled.
#unit_h_cond_set_in_last_compile=10039_H_התנאים של $1 הוגדרו בהתחלת הריצה בהידור האחרון של $2
#% when recompilation of an unit is required the compiler will check that
#% the same conditionals are set for the recompiliation. The compiler has
#% found a conditional that was used the last time the unit was compiled, but
#% the conditional is currently not defined.
unit_w_cant_compile_unit_with_changed_incfile=10040_W_לא ניתן להדר את היחידה $1 למרות שקבצי הinclude שונו
% A unit was found to have modified include files, but
% some source files were not found, so recompilation is impossible.
unit_u_source_modified=10041_U_הקובץ $1 חדש יותר מהקובץ PPU $2
% A modified source file for a compiler unit was found.
unit_u_ppu_invalid_fpumode=10042_U_מנסה להשתמש ביחידה אשר הודרה למצב FPU שונה
% Trying to compile code while using units which were not compiled with
% the same floating point format mode. Either all code should be compiled
% with FPU emulation on, or with FPU emulation off.
unit_u_loading_interface_units=10043_U_טוען את חלק הממשק של היחידות מ $1
% When you use the \var{-vu} flag, the compiler warns that it starts
% loading the units defined in the interface part of the unit.
unit_u_loading_implementation_units=10044_U_טוען את החלק הביצועי של היחידות מ $1
% When you use the \var{-vu} flag, the compiler warns that it starts
% loading the units defined in the implementation part of the unit.
unit_u_interface_crc_changed=10045_U_חתימת ה CRC של חלק הממשק השתנה ביחידה $1
% When you use the \var{-vu} flag, the compiler warns that it the
% CRC calculated for the interface has been changed after the implementation
% has been parsed.
unit_u_implementation_crc_changed=10046_U_חתימת הCRC של החלק הביצועי השתנה ליחידה $1
% When you use the \var{-vu} flag, the compiler warns that it the
% CRC calculated has been changed after the implementation
% has been parsed.
unit_u_finished_compiling=10047_U_הסתיים הידור היחידה $1
% When you use the \var{-vu} flag, the compiler warns that it
% has finished compiling the unit.
unit_u_add_depend_to=10048_U_מוסיף את התלות של $1 ל$2
% When you use the \var{-vu} flag, the compiler warns that it
% has added a dependency between the two units.
unit_u_no_reload_is_caller=10049_U_אין קריאה מחודשת של הקובץ בשביל $1
% When you use the \var{-vu} flag, the compiler warns that it
% has will not reload the unit because it is the unit that wants
% to load this unit
unit_u_no_reload_in_second_compile=10050_U_אין טעינה מחדש, בזמן הידור שני של היחידה $1
% When you use the \var{-vu} flag, the compiler warns that it
% has will not reload the unit because it is already in a second recompile
unit_u_flag_for_reload=10051_U_דגל לטעינה מחודשת: $1
% When you use the \var{-vu} flag, the compiler warns that it
% has to reload the unit
unit_u_forced_reload=10052_U_כופה על טעינה מחודשת
% When you use the \var{-vu} flag, the compiler warns that it
% has is reloading the unit because it was required
unit_u_previous_state=10053_U_המצב הישן של $1: $2
% When you use the \var{-vu} flag, the compiler shows the
% previous state of the unit
unit_u_second_compile_unit=10054_U_נמצא כבר בתהליך הידור $1, מיישם הידור שני
% When you use the \var{-vu} flag, the compiler warns that it starts
% recompiling a unit for the second time. This can happend with interdepend
% units.
unit_u_loading_unit=10055_U_טוען את היחידה $1
% When you use the \var{-vu} flag, the compiler warns that it starts
% loading the unit.
unit_u_finished_loading_unit=10056_U_מסיים לטעון את היחידה $1
% When you use the \var{-vu} flag, the compiler warns that it finished
% loading the unit.
unit_u_registering_new_unit=10057_U_רושם יחידה חדשה $1
% When you use the \var{-vu} flag, the compiler warns that it has
% found a new unit and registers it in the internal lists.
unit_u_reresolving_unit=10058_U_מחשב מחדש את היחידה $1
% When you use the \var{-vu} flag, the compiler warns that it
% has to recalculate the internal data of the unit
unit_u_skipping_reresolving_unit=10059_U_מדלג על טעינה מחודשת של היחידה $1, עדיין בזמן טעינת יחידות בשימוש
% When you use the \var{-vu} flag, the compiler warns that it
% skips to recalculate the internal data of the unit because there
% is no data to recalculate
% \end{description}
# EndOfTeX
#
# Options
#
# 11041 is the last used one
#
unit_u_unload_resunit=10060_U_Unloading resource unit $1 (not needed)
% When you use the \var{-vu} flag, the compiler warns that it is unloading the
% resource handling unit, since no resources are used.
unit_e_different_wpo_file=10061_E_Unit $1 was compiled using a different whole program optimization feedback input ($2, $3); recompile it without wpo or use the same wpo feedback input file for this compilation invocation
% When a unit has been compiled using a particular whole program optimization (wpo) feedback file (\var{-FW<x>} \var{-OW<x>}),
% this compiled version of the unit is specialised for that particular compilation scenario and cannot be used in
% any other context. It has to be recompiled before you can use it in another program or with another wpo feedback input file.
unit_u_indirect_crc_changed=10062_U_Indirect interface (objects/classes) CRC changed for unit $1
% When you use the \var{-vu} flag, the compiler warns that the
% indirect CRC calculated for the unit (this is the CRC of all classes/objects/interfaces/$\ldots$
% in the interfaces of units directly or indirectly used by this unit in the interface) has been changed after the
% implementation has been parsed.
unit_u_ppu_invalid_memory_model=10063_U_PPU is compiled for another i8086 memory model
% This unit file was compiled for a different i8086 memory model and
% cannot be read.
% \end{description}
# EndOfTeX
#
# Options
#
# 11057 is the last used one
#
option_usage=11000_O_$1 [options] <inputfile> [options]
# BeginOfTeX
%
% \section{Command-line handling errors}
% This section lists errors that occur when the compiler is processing the
% command line or handling the configuration files.
% \begin{description}
option_only_one_source_support=11001_W_תומך רק בקובץ מקור אחד בשורת הפקודה
% You can specify only one source file on the command line. The first
% one will be compiled, others will be ignored. This may indicate that
% you forgot a \var{'-'} sign.
option_def_only_for_os2=11002_W_ניתן ליצור את קובץ ה DEF רק לOS/2
% This option can only be specified when you're compiling for OS/2
option_no_nested_response_file=11003_E_אין תמיכה בקבצי תגובה מקוננים
% you cannot nest response files with the \var{@file} command-line option.
option_no_source_found=11004_F_לא צויין קובץ מקור בשורת הפקודה
% The compiler expects a source file name on the command line.
option_no_option_found=11005_N_לא צוינו אפשרויות בתוך קובץ ההגדרות $1
% The compiler didn't find any option in that config file.
option_illegal_para=11006_E_פרמטר לא חוקי: $1
% You specified an unknown option.
option_help_pages_para=11007_H_-? כותב דפי עזרה
% When an unknown option is given, this message is diplayed.
option_too_many_cfg_files=11008_F_יותר מידי קבצי הגדרות מקוננים
% You can only nest up to 16 config files.
option_unable_open_file=11009_F_לא ניתן לפתוח את הקובץ $1
% The option file cannot be found.
option_reading_further_from=11010_D_קורא הגדרות נוספות מ $1
% Displayed when you have notes turned on, and the compiler switches
% to another options file.
option_target_is_already_set=11011_W_המטרה כבר הוגדרה ל: $1
% Displayed if more than one \var{-T} option is specified.
option_no_shared_lib_under_dos=11012_W_DOS אינו תומך בספריות משותפות, חוזר לספריות סטטיות
% If you specify \var{-CD} for the \dos platform, this message is displayed.
% The compiler supports only static libraries under \dos
option_too_many_ifdef=11013_F_IF(N)DEF רבים מידי
% the \var{\#IF(N)DEF} statements in the options file are not balanced with
% the \var{\#ENDIF} statements.
option_too_many_endif=11014_F_ENDIF רבים מידי
% the \var{\#IF(N)DEF} statements in the options file are not balanced with
% the \var{\#ENDIF} statements.
option_too_less_endif=11015_F_תנאי פתוח בסוף הקובץ
% the \var{\#IF(N)DEF} statements in the options file are not balanced with
% the \var{\#ENDIF} statements.
option_no_debug_support=11016_W_מידע ניפוי שגיאות אינו נתמך בסוג קובץ הריצה המבוקש
% It is possible to have a compiler executable that doesn't support
% the generation of debugging info. If you use such an executable with the
% \var{-g} switch, this warning will be displayed.
option_no_debug_support_recompile_fpc=11017_H_נסה להדר מחדש עם המתג -dGDB
% It is possible to have a compiler executable that doesn't support
% the generation of debugging info. If you use such an executable with the
% \var{-g} switch, this warning will be displayed.
option_obsolete_switch=11018_W_אתה משתמש במתג המיושן $1
% this warns you when you use a switch that is not needed/supported anymore.
% It is recommended that you remove the switch to overcome problems in the
% future, when the switch meaning may change.
option_obsolete_switch_use_new=11019_W_אתה משתמש במתג המיושן $1, השתמש במתג $2 במקום
% this warns you when you use a switch that is not supported anymore. You
% must now use the second switch instead.
% It is recommended that you change the switch to overcome problems in the
% future, when the switch meaning may change.
option_switch_bin_to_src_assembler=11020_N_מעביר את האוסף למצב ברירת מחדל של כתיבת מאסף
% this notifies you that the assembler has been changed because you used the
% -a switch which can't be used with a binary assembler writer.
option_incompatible_asm=11021_W_התוכן הנבחר של הassembler "$1" אינו מתאים ל "$2"
option_asm_forced=11022_W_התוכן של המאסף "$1" לא מסוגל ליצור קבצי אובייקט, משתמש במאסף ברירת המחדל במקום
% The assembler output selected can not generate
% object files with the correct format. Therefore, the
% default assembler for this target is used instead.
option_using_file=11026_T_קורא אפשרויות מהקובץ $1
% Options are also read from this file
option_using_env=11027_T_קורא אפשרויות מהסביבה $1
% Options are also read from this environment string
option_handling_option=11028_D_מטפל באפשרות "$1"
% Debug info that an option is found and will be handled
option_help_press_enter=11029__*** לחץ על enter ***
% Message shown when help is shown page per page. When pressing the ENTER
% Key, the next page of help is shown. If you press q and then ENTER, the
% compiler exits.
option_start_reading_configfile=11030_H_מתחיל בקריאת קובץ ההגדרות $1
% Starting of config file parsing.
option_end_reading_configfile=11031_H_סיום קריאת קובץ ההגדרות $1
% End of config file parsing.
option_interpreting_option=11032_D_מפרש את האפשרות "$1"
% The compiler is interpreting an option
option_interpreting_firstpass_option=11036_D_מפרש את המעבר הראשון על האפשרות "$1"
% The compiler is interpreting an option for the first time.
option_interpreting_file_option=11033_D_מפרש את הגדרת הקובץ "$1"
% The compiler is interpreting an option which it read from the configuration file.
option_read_config_file=11034_D_קורא את קובץ ההגדרות "$1"
% The compiler is starting to read the configuration file.
option_found_file=11035_D_נמצא קובץ מקור בשם "$1"
% Additional infos about options, displayed
% when you have debug option turned on.
option_code_page_not_available=11039_E_קוד דף לא ידוע
% An unknown codepage for the source files was requested.
% The compiler is compiled with support for several codepages built-in.
% The requested codepage is not in that list. You will need to recompile
% the compiler with support for the codepage you need.
option_config_is_dir=11040_F_נמצאה ספרייה במקום קובץ ההגדרות $1
% Directories can not be used as configuration files.
option_confict_asm_debug=11041_W_סוג הפלט של המאסף שנבחר "$1" אינו יכול ליצור מידע עבור ניפוי שגיאות. מבטל ניפוי שגיאות
% The assembler output selected can not generate
% debugging information, debugging option is therefore disabled.
%\end{description}
# EndOfTeX
#
# Logo (option -l)
#
option_ppc386_deprecated=11042_W_Use of ppc386.cfg is deprecated, please use fpc.cfg instead
% Using ppc386.cfg is still supported for historical reasons, however, for a multiplatform
% system the naming makes no sense anymore. Please continue to use fpc.cfg instead.
option_else_without_if=11043_F_In options file $1 at line $2 #ELSE directive without #IF(N)DEF found
% An \var{\#ELSE} statement was found in the options file without a matching \var{\#IF(N)DEF} statement.
option_unsupported_target=11044_F_Option "$1" is not, or not yet, supported on the current target platform
% Not all options are supported or implemented for all target platforms. This message informs you that a chosen
% option is incompatible with the currently selected target platform.
option_unsupported_target_for_feature=11045_F_The feature "$1" is not, or not yet, supported on the selected target platform
% Not all features are supported or implemented for all target platforms. This message informs you that a chosen
% feature is incompatible with the currently selected target platform.
option_dwarf_smart_linking=11046_N_DWARF debug information cannot be used with smart linking on this target, switching to static linking
% Smart linking is currently incompatible with DWARF debug information on most
% platforms, so smart linking is disabled in such cases.
option_ignored_target=11047_W_Option "$1" is ignored for the current target platform.
% Not all options are supported or implemented for all target platforms. This message informs you that a chosen
% option is ignored for the currently selected target platform.
option_debug_external_unsupported=11048_W_Disabling external debug information because it is unsupported for the selected target/debug format combination.
% Not all debug formats can be stored in an external file on all platforms. In particular, on
% Mac OS X only DWARF debug information can be stored externally.
option_dwarf_smartlink_creation=11049_N_DWARF debug information cannot be used with smart linking with external assembler, disabling static library creation.
% Smart linking is currently incompatble with DWARF debug information on most
% platforms, so smart linking is disabled in such cases.
option_invalid_macosx_deployment_target=11050_E_Invalid value for MACOSX_DEPLOYMENT_TARGET environment variable: $1
option_invalid_iphoneos_deployment_target=11051_E_Invalid value for IPHONEOS_DEPLOYMENT_TARGET environment variable: $1
% On Mac OS X, the MACOSX\_DEPLOYMENT\_TARGET/IPHONEOS\_DEPLOYMENT\_TARGET environment variable can be
% used to set the default target OS version. In case of Mac OS X, it has to be of the format
% XY.Z or XY.Z.AB with X, Y,Z , A and B all digits from 0-9.
% In case of iOS, it has to be X.Z.A, where X, Z and A can all be either 1 or 2
% digits from 0-9.
option_illegal_fpu_eabihf=11052_E_You must use one of the VFP FPU types when using the EABIHF ABI target
% The EABIHF (VFP hardfloat) ABI target can only be used with VFP FPUs.
option_w_unsupported_debug_format=11053_W_The selected debug format is not supported on the current target, not changing the current setting
% Not all targets support all debug formats (in particular, Stabs is not supported on 64 bit targets).
option_missing_arg=11054_E_argument to "$1" is missing
% Displayed when parameter must be followed by an argument.
option_malformed_para=11055_E_malformed parameter: $1
% Given argument is not valid for parameter.
option_smart_link_requires_external_linker=11056_W_Smart linking requires external linker
option_com_files_require_tiny_model=11057_E_Creating .COM files is not supported in the current memory model. Only the tiny memory model supports making .COM files.
%\end{description}
# EndOfTeX
#
# Whole program optimization
#
# 12019 is the last used one
#
# BeginOfTeX
%
% \section{Whole program optimization messages}
% This section lists errors that occur when the compiler is performing
% whole program optimization.
% \begin{description}
wpo_cant_find_file=12000_F_Cannot open whole program optimization feedback file "$1"
% The compiler cannot open the specified feedback file with whole program optimization information.
wpo_begin_processing=12001_D_Processing whole program optimization information in wpo feedback file "$1"
% The compiler starts processing whole program optimization information found in the named file.
wpo_end_processing=12002_D_Finished processing the whole program optimization information in wpo feedback file "$1"
% The compiler has finished processing the whole program optimization information found in the named file.
wpo_expected_section=12003_E_Expected section header, but got "$2" at line $1 of wpo feedback file
% The compiler expected a section header in the whole program optimization file (starting with \%),
% but did not find it.
wpo_no_section_handler=12004_W_No handler registered for whole program optimization section "$2" at line $1 of wpo feedback file, ignoring
% The compiler has no handler to deal with the mentioned whole program optimization information
% section, and will therefore ignore it and skip to the next section.
wpo_found_section=12005_D_Found whole program optimization section "$1" with information about "$2"
% The compiler encountered a section with whole program optimization information, and according
% to its handler this section contains information usable for the mentioned purpose.
wpo_no_input_specified=12006_F_The selected whole program optimizations require a previously generated feedback file (use -Fw to specify)
% The compiler needs information gathered during a previous compilation run to perform the selected
% whole program optimizations. You can specify the location of the feedback file containing this
% information using the -Fw switch.
wpo_not_enough_info=12007_E_No collected information necessary to perform "$1" whole program optimization found
% While you pointed the compiler to a file containing whole program optimization feedback, it
% did not contain the information necessary to perform the selected optimizations. You most likely
% have to recompile the program using the appropriate -OWxxx switch.
wpo_no_output_specified=12008_F_Specify a whole program optimization feedback file to store the generated info in (using -FW)
% You have to specify the feedback file in which the compiler has to store the whole program optimization
% feedback that is generated during the compilation run. This can be done using the -FW switch.
wpo_output_without_info_gen=12009_E_Not generating any whole program optimization information, yet a feedback file was specified (using -FW)
% The compiler was instructed to store whole program optimization feedback into a file specified using -FW,
% but not to actually generated any whole program optimization feedback. The classes of to be
% generated information can be specified using -OWxxx.
wpo_input_without_info_use=12010_E_Not performing any whole program optimizations, yet an input feedback file was specified (using -Fw)
% The compiler was not instructed to perform any whole program optimizations (no -Owxxx parameters),
% but nevertheless an input file with such feedback was specified (using -Fwyyy). Since this can
% indicate that you forgot to specify an -Owxxx parameter, the compiler generates an error in this case.
wpo_skipping_unnecessary_section=12011_D_Skipping whole program optimization section "$1", because not needed by the requested optimizations
% The whole program optimization feedback file contains a section with information that is not
% required by the selected whole program optimizations.
wpo_duplicate_wpotype=12012_W_Overriding previously read information for "$1" from feedback input file using information in section "$2"
% The feedback file contains multiple sections that provide the same class of information (e.g.,
% information about which virtual methods can be devirtualized). In this case, the information in last encountered
% section is used. Turn on debugging output (-vd) to see which class of information is provided by each section.
wpo_cannot_extract_live_symbol_info_strip=12013_E_Cannot extract symbol liveness information from program when stripping symbols, use -Xs-
% Certain symbol liveness collectors extract the symbol information from the linked program. If the symbol information
% is stripped (option -Xs), this is not possible.
wpo_cannot_extract_live_symbol_info_no_link=12014_E_Cannot extract symbol liveness information from program when when not linking
% Certain symbol liveness collectors extract the symbol information from the linked program. If the program is not
% linked by the compiler, this is not possible.
wpo_cannot_find_symbol_progs=12015_F_Cannot find "$1" or "$2" to extract symbol liveness information from linked program
% Certain symbol liveness collectors need a helper program to extract the symbol information from the linked program.
% This helper program is normally 'nm', which is part of the GNU binutils.
wpo_error_reading_symbol_file=12016_E_Error during reading symbol liveness information produced by "$1"
% An error occurred during the reading of the symbol liveness file that was generated using the 'nm' or 'objdump' program. The reason
% can be that it was shorter than expected, or that its format was not understood.
wpo_error_executing_symbol_prog=12017_F_Error executing "$1" (exitcode: $2) to extract symbol information from linked program
% Certain symbol liveness collectors need a helper program to extract the symbol information from the linked program.
% The helper program produced the reported error code when it was run on the linked program.
wpo_symbol_live_info_needs_smart_linking=12018_E_Collection of symbol liveness information can only help when using smart linking, use -CX -XX
% Whether or not a symbol is live is determined by looking whether it exists in the final linked program.
% Without smart linking/dead code stripping, all symbols are always included, regardless of whether they are
% actually used or not. So in that case all symbols will be seen as live, which makes this optimization ineffective.
wpo_cant_create_feedback_file=12019_E_Cannot create specified whole program optimisation feedback file "$1"
% The compiler is unable to create the file specified using the -FW parameter to store the whole program optimisation information.
%\end{description}
# EndOfTeX
#
# Logo (option -l)
#
option_logo=11023_[
Free Pascal Compiler version $FPCFULLVERSION [$FPCDATE] for $FPCCPU
Copyright (c) 1993-2025 by Florian Klaempfl and others
]
#
# Info (option -i)
#
option_info=11024_[
Free Pascal Compiler version $FPCVERSION
תאריך מהדר : $FPCDATE
מהדר למעבד: $FPCCPU
מערכות הפעלה נתמכות:
$OSTARGETS
הוראות מעבד נתמכות:
$INSTRUCTIONSETS
הוראות נתמכות של יחידת נקודה צפה:
$FPUINSTRUCTIONSETS
תמיכת המיטוב:
$OPTIMIZATIONS
התוכנה מוגשת תחת רישיון GNU General Public License
למידע נוסף יש לקרוא את COPYING.v2
דיווח על תקלות (באגים), הצעות וכו':
https://bugs.freepascal.org
]
#
# Help pages (option -? and -h)
#
# The first character on the line indicates who will display this
# line, the current possibilities are :
# * = every target
# 3 = 80x86 targets
# 6 = 680x0 targets
# e = in extended debug mode only
# P = PowerPC targets
# S = Sparc targets
# V = Virtual machine targets
# The second character also indicates who will display this line,
# (if the above character was TRUE) the current possibilities are :
# * = everyone
# g = with GDB info supported by the compiler
# O = OS/2
# L = UNIX systems
# The third character represents the indentation level.
#
option_help_pages=11025_[
**0*_הוסף את הסימן + לאחר אפשרות מתג בוליאני לאפשר את האפשרות, הוסף את הסימן - לבטל את האפשרות
**1a_המהדר אינו מוחק את קובץ הassembler שנוצר
**2al_רושם רשימה של שורות קוד מקור בקובץ הassembler
**2an_רשימת מידע של צמתים בקובץ הassembler
*L2ap_השתמש בצינורות במקום קבצי assembler זמניים
**2ar_רשימה אודות רישום של הקצאה/שחרור בקובץ הassembler
**2at_רשימה זמנית אודות הקצאה/שחרור בקובץ הassembler
**1A<x>_תסדירי פלט:
**2Adefault_השתמש במאסף ברירת מחדל
3*2Aas_אסוף עם GNU AS
3*2Anasmcoff_קובץ COFF (Go32v2) בשימוש עם Nasm
3*2Anasmelf_קובץ ELF32 (Linux) בשימוש עם Nasm
3*2Anasmwin32_קובץ אובייקט Win32 בשימוש עם Nasm
3*2Anasmwdosx_קובץ אובייקט Win32/WDOSX בשימוש עם Nasm
3*2Awasm_קובץ obj בשימוש עם Wasm (Watcom)
3*2Anasmobj_קובץ obj בשימוש עם Nasm
3*2Amasm_קובץ obj בשימוש עם Masm (Microsoft)
3*2Atasm_קובץ obj בשימוש Tasm (Borland)
3*2Aelf_קובץ ELF32 (Linux) בשימוש כותב פנימי
3*2Acoff_קובץ OFF (Go32v2) בשימוש כותב פנימי
3*2Apecoff_קובץ pecoff (Win32) בשימוש כותב פנימי
4*2Aas_אסוף עם GNU AS
6*2Aas_קובץ-o Unix בשימוש GNU AS
6*2Agas_GNU Motorola assembler
6*2Amit_MIT Syntax (GAS ישן)
6*2Amot_Motorola assembler תקני
A*2Aas_אסוף עם GNU AS
P*2Aas_אסוף עם GNU AS
S*2Aas_אסוף עם GNU AS
**1b_ייצר מידע לדפדוף
**2bl_ייצר מידע על סמלים מקומיים
**1B_בנה את כל המודולים
**1C<x>_אפשרויות יצירת קוד:
**2Cc<x>_קובע מוסכמות הפעלה ברירת מחדל ל <ס>
**2CD_צור גם ספרייה דינאמית (לא נתמך)
**2Ce_מהדר עם הדמייה של opcodes השייכים לנקודה צפה
**2Cf<x>_בחר הוראות FPU לשימוש, ראה fpc -i לערכים אפשריים
**2CF<x>_דיוק נקודה עשרונית קבועה מינימלית (default, 32, 64)
**2Cg_צור קוד PIC
**2Ch<n>_כמות של <n> בתים ל מצבור (בין 1023 ו67107840)
**2Ci_בדיקת IO
**2Cn_השמט מצב קישור
**2Co_בדוק גלישה של פעולות מספר שלם
**2CO_בדוק עבור פעולות גלישה אפשרויות של מספר שלם
**2Cp<x>_בחר קבוצת הוראות, ראה fpc -i לערכים אפשריים
**2CP<x>=<y>_הגדרות אריזה
**3CPPACKSET=<y>_ <y> מסדר הקצאה: 0, 1 או DEFAULT או NORMAL, 2, 4 ו 8
**2Cr_בדיקת טווח
**2CR_וודא קריאה תקינה למתודה
**2Cs<n>_קבע גודל מחסנית ל <n>
**2Ct_בדיקת מחסנית
**2CX_צור גם ספרייה של קישור חכם
**1d<x>_מגדיר את הסמל <x>
**1D_יוצר קובץ DEF
**2Dd<x>_יוצר תאור ל <x>
**2Dv<x>_יוצר גרסת DLL ל <x>
*O2Dw_ישום PM
**1e<x>_קובע נתיב לקובץ ריצה
**1E_זהה ל -Cn
**1fPIC_זהה ל -Cg
**1F<x>_קובע שם קבצים ומיקומים:
**2Fa<x>[,y]_קודם טוען את היחידות <x> ו [y] ראשונות, לפני ניתוח שורת ה uses
**2Fc<x>_קובע קוד דף של קלט ל<x>
**2FC<x>_קבע שם מהדר RC בינארי ל <x>
**2FD<x>_קובע את הספרייה בה אפשר לחפש את כלי העזר של המהדר
**2Fe<x>_הפנה הודעות שגיאה ל<x>
**2Ff<x>_הוסף את <x> לנתיב המסגרת (רק ב Darwin)
**2FE<x>_הפנה פלט של exe/unit לנתיב <x>
**2Fi<x>_מוסיף את <x> לרשימת הנתיבים
**2Fl<x>_מוסיף את <x> לרשימת הנתיבים של הספריה
**2FL<x>_משתמש ב<x> כמקשר דינאמי
**2Fm<x>_טוען טבלת המרה של יוניקוד מהקובץ x>.txt> מספריית המהדר
**2Fo<x>_מוסיף את <x> לרשינת הנתיבים של אובייקט
**2Fr<x>_טוען קובץ הודעות שגיאה <x>
**2FR<x>_קבע מקשר לקובץ res ל <x>
**2Fu<x>_מוסיף את <x> לרשימת הנתיבים של יחידה
**2FU<x>_קובע את המיקום הפלט של היחידות ל <x> ומשכתב את -FE
*g1g_יוצר מידע לניפוי שגיאות
*g2gc_יוצר בדיקות למצביעים
*g2gh_השתמש ביחידה heaptrace (עבור דליפות זכרון/בעיות בניפוי שגיאות)
*g2gl_השתמש ביחידת מידע של שורה להציג מידע נוסף לbacktraces
*g2go<x>_צור אפשרויות לניפוי שגיאות
*g3godwarfsets_אפשר מידע לניהול מידע עבור ניפוי שגיאות של Dwarf (שובר את gdb < 6.5)
*g2gp_משמר גודל שמות סמלי הstabs
*g2gs_מייצר מידע לניפוי שגיאות stub
*g2gt_לכלך משתנים מקומיים (לזיהוי מידע לא מאותחל)
*g2gv_מייצר תוכנות עם יכולת מעקב של valgrind
*g2gw_מייצר מידע לניפוי שגיאות לdwarf
*g2gw2_מיצר מידע לניפוי שגיאות dwarf-2
*g2gw3_מיצר מידע לניפוי שגיאות dwarf-3
**1i_מידע
**2iD_הצג תאריך המהדר
**2iV_הצג גרסת המהדר
**2iW_הצג גרסה מלאה של המהדר
**2iSO_הצג מערכת הפעלה של המהדר
**2iSP_הצג גרסת מעבד של המהדר
**2iTO_הצג את המטרה של מערכת ההפעלה
**2iTP_הצג את המטרה של המעבד
**1I<x>_הוסף את <x> לרשימת הנתיבים להוספה
**1k<x>_העבר את <x> למקשר
**1l_כתוב סמליל
**1M<x>_הגדר מצב שפה ל <x>
**2Mfpc_דיאלקט של Free Pascal (ברירת מחדל)
**2Mobjfpc_אפשר כמה תוספות של Delphi 2
**2Mdelphi_מנסה להיות תואם Delphi
**2Mtp_מנסה להיות תואם ל TP/BP 7.0
**2Mmacpas_מנסה להיות תואם ללהג של Macintosh Pascal
**1n_אל תקרא את קובץ הגדרות ברירת המחדל
**1o<x>_שנה את שם קובץ הריצה שהתקבל ל <x>
**1O<x>_מיטובים:
**2O-_בטל מיטוב
**2O1_מיטוב רמה 1 (מהיר וטוב לניפוי שגיאות)
**2O2_מיטוב רמה 2 (-O1 + מיטוב מהיר)
**2O3_מיטוב רמה 3 (-O2 + מיטוב איטי)
**2Oa<x>=<y>_קבע יישור
**2Oo[NO]<x>_ע"מ לאפשר או לאפשר מיטובים, ראה fpc -i לאפשרויות
**2Op<x>_לקביעת מיטוב למעבד נבחר, ראה fpc -i לאפשרויות
**2Os_צור קוד קטן
**1pg_צור קוד פרופיל עבור gprof (מגדיר את FPC_PROFILE)
**1R<x>_סגנון קריאת האסף:
**2Rdefault_השתמש במאסף ברירת מחדל
3*2Ratt_קרא סגנון מקשר של AT&T
3*2Rintel_קרא סגנון מקשר של Intel
4*2Ratt_קרא סגנון מקשר של AT&T
4*2Rintel_קרא סגנון מקשר של Intel
8*2Ratt_קרא סגנון מקשר של AT&T
8*2Rintel_קרא סגנון מקשר של Intel
6*2RMOT_קרא סגנון מקשר של Motorola
**1S<x>_אפשרויות תחביר:
**2S2_זהה ל -Mobjfpc
**2Sc_תומך אופרטורים בסגנון C (*=, +=, /= ו -=)
**2Sa_הוסף קוד טענת תנאי קביעה (assertion)
**2Sd_זהה ל -Mdelphi
**2Se<x>_אפשרויות שגיאה. <x> הינו השילוב הבא:
**3*_<n> : המהדר עוצר לאחר <n> שגיאות (ברירת מחדל היא 1)
**3*_w : המהדר עוצר גם לאחר אזהרות
**3*_n : המהדר עוצר לאחר הערות
**3*_h : המהדר עוצר לאחר רמזים
**2Sg_אפשר LABEL ו GOTO
**2Sh_השתמש ב ansistrings
**2Si_תמוך בסגנון C++ של INLINE
**2Sk_טען את היחידה fpcylix
**2SI<x>_קבע סגנון ממשק ל<x>
**3SIcom_תואם ממשקי COM (ברירת מחדל)
**3SIcorba_תואם ממשקי CORBA
**2Sm_תמוך במקרו דומים לC (גלובליים)
**2So_זהה ל -Mtp
**2Ss_שם יוצר חייב להיות init (שם הורס חייב להיות done)
**2Sx_אפשר מילות מפתח לexception (ברירת מחדל במצבי Delphi/ObjFPC)
**1s_אל תקרא למאסף והמקשר
**2sh_צור תסריט לקישור במארח
**2st_צור תסריט לקישור במטרה
**2sr_דלג על רישום הקצאת מופע (השתמש בייחד עם -alr)
**1T<x>_מטרת מערכת ההפעלה:
3*2Temx_OS/2 בשימוש EMX ( בייחד עם הרחבת EMX/RSX)
3*2Tfreebsd_FreeBSD
3*2Tgo32v2_גרסה 2 של הרחבת DJ Delorie DOS
3*2Tlinux_Linux
3*2Tnetbsd_NetBSD
3*2Tnetware_Novell Netware Module (clib)
3*2Tnetwlibc_Novell Netware Module (libc)
3*2Topenbsd_OpenBSD
3*2Tos2_OS/2 / eComStation
3*2Twatcom_Watcom תואם הרחבת DOS
3*2Twdosx_WDOSX הרחבת DOS
3*2Twin32_Windows 32 סיביות
3*2Twince_Windows CE
4*2Tlinux_Linux
6*2Tamiga_Commodore Amiga
6*2Tatari_Atari ST/STe/TT
6*2Tlinux_Linux/m68k
6*2Tmacos_Macintosh m68k (לא נתמך)
6*2Tpalmos_PalmOS
A*2Tlinux_Linux
A*2Twince_Windows CE
P*2Tamiga_AmigaOS על PowerPC
P*2Tdarwin_Darwin ו Mac OS X על PowerPC
P*2Tlinux_Linux על PowerPC
P*2Tmacos_Mac OS (קלאסי) על PowerPC
P*2Tmorphos_MorphOS
S*2Tlinux_Linux
**1u<x>_מסיר את ההגדרה של הסמל <x>
**1U_הגדרות יחידה:
**2Un_אל תבדוק את שם היחידה
**2Ur_צור קבצי שחרור של יחידות
**2Us_הדר את יחידת הsystem
**1v<x>_תהיה מפורט יותר. <x> הינו שילוב של התווים הבאים:
**2*_e : הצג הודעות שגיאה (ברירת מחדל)
**2*_0 : אל תציג כלום (למעט הודעות שגיאה)
**2*_w : הצג אזהרות
**2*_u : הצג מידע על יחידה
**2*_n : הצג הערות
**2*_t : הצג קבצים שהיו בשימוש
**2*_h : הצג רמזים
**2*_c : הצג תנאים
**2*_i : הצג מידע כללי
**2*_d : הצג מידע לנפוי שגיאות
**2*_l : הצג מספרי שורות
**2*_r : מצב תואם Rhide/GCC
**2*_a : הצג הכול
**2*_x : הצג מידע על קובץ הריצה (רק בWin32)
**2*_b : כתוב הודעות עם שמות קבצים ונתיבים מלאים
**2*_v : כתוב את הקובץ fpcdebug.txt עם הרבה מידע על ניפוי שגיאות
**2*_p : כתוב את הקובץ tree.log עם ניתוח עץ
3*1W<x>_אפשרות מבוססת מטרה (מטרות)
A*1W<x>_אפשרות מבוססת מטרה (מטרות)
P*1W<x>_אפשרות מבוססת מטרה (מטרות)
3*2Wb_צור חבילה במקום ספרייה (Darwin)
P*2Wb_צור חבילה במקום ספרייה (Darwin)
p*2Wb_צור חבילה במקום ספרייה (Darwin)
3*2WB_צור תמונה הניתנת למיקום מחודש (Windows)
A*2WB_צור תמונה הניתנת למיקום מחודש (Windows, Symbian)
3*2WC_מציין אפליקציה מסוג מסוף (EMX, OS/2, Windows)
A*2WC_מציין אפליקציה מסוג מסוף (Windows)
P*2WC_מציין אפליקציה מסוג מסוף (Classic Mac OS)
3*2WD_השתמש ב DEFFILE לייצא פנקציות של DLL או EXE (Windows)
A*2WD_השתמש ב DEFFILE לייצא פנקציות של DLL או EXE (Windows)
3*2WF_מציין אפליקציה מסוג מסך מלא (EMX, OS/2)
3*2WG_מציין אפליקציה מסוג גרפי (EMX, OS/2, Windows)
A*2WG_מציין אפליקציה מסוג גרפי (Windows)
P*2WG_מציין אפליקציה מסוג גרפי (Classic Mac OS)
3*2WN_אל תצור קוד משנה מיקום, נדרש עבור ניפוי שגיאות (Windows)
A*2WN_אל תצור קוד משנה מיקום, נדרש עבור ניפוי שגיאות (Windows)
3*2WR_תיצור קוד משנה מיקום (Windows)
A*2WR_תיצור קוד משנה מיקום (Windows)
P*2WT_ציין אפליקציה מסוג כלי MPW (Classic Mac OS)
**1X_הגדרות ריצה:
**2Xc_העבר --shared/-dynamic למקשר (BeOS, Darwin, FreeBSD, Linux)
**2Xd_אל תשתמש בנתיב חיפוש הספריות הסטנדרטיות (נדרש עבור הידור לארכיטקטורות אחרות)
**2Xe_השתמש במקשר חיצוני
**2XD_נסה לקשר יחידות בצורה דינאמית (מגדיר FPC_LINK_DYNAMIC)
**2Xi_השתמש במקשר פנימי
**2Xm_צור מפת קישורים
**2XM<x>_הגדר את השם של רוטינה ה'עיקרית' של התוכנה (ברירת מחדל הוא 'main')
**2XP<x>_צרף את השמות המגיעים עÝ התחילית <x> מbinutils
**2Xr<x>_הגדר את נתיב חיפוש הספריות ל <x> (נדרש עבור הידור לארכיטקטורות אחרות) (BeOS, Linux)
**2XR<x>_צרף את <x> לכל נתיבי החיפוש של המקשר (BeOS, Darwin, FreeBSD, Linux, Mac OS, Solaris)
**2Xs_נקה את כל הסמלים מקבצי ההרצה
**2XS_נסה לקשר יחידות בצורה סטטית (ברירת מחדל, מגדיר FPC_LINK_STATIC)
**2Xt_קשר עם ספריות סטטיות (מעביר -static למקשר)
**2XX_תנסה לבצע smartlink ליחידות (מגדיר FPC_LINK_SMART)
**1*_
**1?_הצג את עזרה זו
**1h_הצג עזרה זו ללא לחכות
]
#
# The End...
%%% parser_e_only_class_methods_via_class_ref=03053_E_רק מתודות מחלקה יכולות להיות מוגדרות בהתייחסות מחלקה
% This error occurs in a situation like the following:
% \begin{verbatim}
% Type :
% Tclass = Class of Tobject;
%
% Var C : TClass;
%
% begin
% ...
% C.free
% \end{verbatim}
% \var{Free} is not a class method and hence cannot be called with a class
% reference.
%%% parser_e_only_class_methods=03054_E_רק מתודת מחלקה יכולה לגשת למתודת מחלקה
% This is related to the previous error. You cannot call a method of an object
% from a inside a class method. The following code would produce this error:
% \begin{verbatim}
% class procedure tobject.x;
%
% begin
% free
% \end{verbatim}
% Because free is a normal method of a class it cannot be called from a class
% method.
%%% parser_e_absolute_only_one_var=03095_E_absolute ניתן לשימוש רק עם משתנה אחת
% You cannot specify more than one variable before the \var{absolute} directive.
% Thus, the following construct will provide this error:
% \begin{verbatim}
% Var Z : Longint;
% X,Y : Longint absolute Z;
% \end{verbatim}
% \item [ absolute can only be associated a var or const ]
% The address of a \var{absolute} directive can only point to a variable or a
% typed constant. Therefore, the following code will produce this error:
% \begin{verbatim}
% Procedure X;
%
% var p : longint absolute x;
% \end{verbatim}
%
%%% parser_e_type_and_var_only_in_generics=03224_E_ניתן להשתמש ב VAR ו TYPE רק עם generics
% The usage of VAR and TYPE to declare new types inside an object is allowed only inside
% generics.
%%% type_w_mixed_signed_unsigned=04035_W_עירבוב ביטויי סימנים וlongwords מספקים תוצאה של 64bit
% If you divide (or calculate the modulus of) a signed expression by a longword (or vice versa),
% or if you have overflow and/or range checking turned on and use an arithmetic
% expression (+, -, *, div, mod) in which both signed numbers and longwords appear,
% then everything has to be evaluated in 64bit which is slower than normal
% 32bit arithmetic. You can avoid this by typecasting one operand so it
% matches the result type of the other one.
%%% type_w_signed_unsigned_always_false=04044_W_ההשוואה תמיד תחזיר ערך של false בגלל טווח הערכים
% There is a comparison between an unsigned value and a signed constant which is
% less than zero. Because of type promotion, the statement will always evaluate to
% false. Exlicitly typecast the constant to the correct range to avoid this problem.
%%% type_w_signed_unsigned_always_true=04045_W_ההשוואה תמיד תחזיר ערך של true בגלל טווח הערכים
% There is a comparison between an unsigned value and a signed constant which is
% less than zero. Because of type promotion, the statement will always evaluate to
% true. Exlicitly typecast the constant to the correct range to avoid this problem.