Jonas Maebe 3d9713b9c8 * has_single_field() now looks recursively into fields that are aggregate ... types until it finds a non-aggregate type, and then returns "true" if that aggregate (record or array) contains one element * it now also returns the type of that element directly rather than a tfieldvarsym, since we only care about the type and in case of an array there is no field git-svn-id: trunk@30205 -		2015-03-14 18:35:53 +00:00
..
aopt386.pas	* support disabling the i386 peephole optimizer with -Oonopeephole	2014-02-05 00:27:16 +00:00
cgcpu.pas	* modified patch of Paul W to replace leave by mov/pop, resolves #26455	2015-02-05 20:51:12 +00:00
cpubase.inc	* optimize mov/lea	2013-11-01 19:01:14 +00:00
cpuelf.pas	Switch back to emitting BLX instructions and fix calculation of constant offsets(should rarely/never happen).	2014-12-14 16:28:35 +00:00
cpuinfo.pas	+ cpu capability CPUX86_HAS_CMOV	2015-02-21 20:47:40 +00:00
cpunode.pas	* isolated segment-related functionality of tabsolutevarsym into i386/i8086-	2014-03-30 15:42:53 +00:00
cpupara.pas	* has_single_field() now looks recursively into fields that are aggregate	2015-03-14 18:35:53 +00:00
cpupi.pas
cputarg.pas	merged/updated AROS/i386 target to trunk from AROS branch, to support Marcus Sackrow's work on AROS support which will hopefully benefit all Amiga-like targets (classic, MorphOS) on the long run. Compiler only, RTL comes in the next run.	2014-08-17 18:18:07 +00:00
csopt386.pas	* fixes several issues which cause warnings by the dfa code when using it to detect uninitialized variables	2013-12-01 17:02:08 +00:00
daopt386.pas	* fixes several issues which cause warnings by the dfa code when using it to detect uninitialized variables	2013-12-01 17:02:08 +00:00
hlcgcpu.pas	+ added method reference_reset_base with support for different pointer types to	2014-03-28 00:01:18 +00:00
i386att.inc	+ applied remaining patches of Torsten Grundke: adds gather instructions of avx2	2015-02-17 21:43:46 +00:00
i386atts.inc	+ applied remaining patches of Torsten Grundke: adds gather instructions of avx2	2015-02-17 21:43:46 +00:00
i386int.inc	+ applied remaining patches of Torsten Grundke: adds gather instructions of avx2	2015-02-17 21:43:46 +00:00
i386nop.inc	+ applied remaining patches of Torsten Grundke: adds gather instructions of avx2	2015-02-17 21:43:46 +00:00
i386op.inc	+ applied remaining patches of Torsten Grundke: adds gather instructions of avx2	2015-02-17 21:43:46 +00:00
i386prop.inc	* corrects change flags for VSQRTSD	2015-02-28 22:42:25 +00:00
i386tab.inc	+ applied remaining patches of Torsten Grundke: adds gather instructions of avx2	2015-02-17 21:43:46 +00:00
n386add.pas	* fix warnings when compiling the compiler with DFA optimizer enabled on i386	2014-08-20 12:28:44 +00:00
n386cal.pas	AROS: syscall (library call) support for based on the Amiga/68k and MorphOS/PPC versions	2014-08-19 00:39:18 +00:00
n386flw.pas	* Generate exception filters data on i386-win32 and x86_64-win64 without using global labels.	2015-01-20 13:52:19 +00:00
n386inl.pas	+ i386: generate optimized code for 64-bit arithmetic shifts by constant amount. Shifts by 63 and by less than 32 take just two instructions, shifts by 32..62 bits are done with 3 instructions.	2013-10-29 16:10:13 +00:00
n386ld.pas	* isolated segment-related functionality of tabsolutevarsym into i386/i8086-	2014-03-30 15:42:53 +00:00
n386mat.pas	* i386: switch the div/mod node to shared code, leaving in place the specific optimization for division by power of 2.	2014-06-15 16:20:53 +00:00
n386mem.pas	* moved x86-specific tpointerdef functionality to architecture-specific	2014-03-30 21:04:36 +00:00
n386set.pas	* cleanup of unused units	2013-07-07 20:00:33 +00:00
popt386.pas	+ cpu capability CPUX86_HAS_CMOV	2015-02-21 20:47:40 +00:00
r386ari.inc	* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.	2013-10-03 08:08:04 +00:00
r386att.inc	* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.	2013-10-03 08:08:04 +00:00
r386con.inc	* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.	2013-10-03 08:08:04 +00:00
r386dwrf.inc	* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.	2013-10-03 08:08:04 +00:00
r386int.inc	* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.	2013-10-03 08:08:04 +00:00
r386iri.inc	* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.	2013-10-03 08:08:04 +00:00
r386nasm.inc	* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.	2013-10-03 08:08:04 +00:00
r386nor.inc
r386nri.inc	* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.	2013-10-03 08:08:04 +00:00
r386num.inc	* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.	2013-10-03 08:08:04 +00:00
r386ot.inc	* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.	2013-10-03 08:08:04 +00:00
r386rni.inc	* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.	2013-10-03 08:08:04 +00:00
r386sri.inc	* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.	2013-10-03 08:08:04 +00:00
r386stab.inc
r386std.inc	* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.	2013-10-03 08:08:04 +00:00
ra386att.pas
ra386int.pas
rgcpu.pas
rropt386.pas	* fixes several issues which cause warnings by the dfa code when using it to detect uninitialized variables	2013-12-01 17:02:08 +00:00
symcpu.pas	Add new procedure option: po_syscall_has_libsym,	2014-10-03 19:26:16 +00:00