procoptions even when it's through an array-of-const parameter
* always call create_varargs_paraloc_info() instead of create_paraloc_info()
in the former case, even when no varargs parameters are specified (because
on some platforms even some non-variadic parameters need to be passed
differently, such as on ARM with gnueabihf)
git-svn-id: trunk@41420 -
"don't free even if not registered"; use for defs that may not be written
to a ppu file, but that must nevertheless survive the compilation of the
current module
* mark all defs created for para locations as "don't free even if not
registered", because we don't discard and recalculate all para locations
after a module has been compiled (since that's not needed)
o solves issues if the paralocations for a routine in the interface of
unit A are calculated while the implementation of unit B gets
compiled, and a new reusable type is allocated at that point which
is not used anywhere else (after r32160)
git-svn-id: trunk@32235 -
Add support for .set and .weak on AVR.
Fix 64 bit negation on AVR.
Add cpu_capabilities to cpuinfo.pas and fixed some peephole optimizations.
Pass >4 byte parameters by reference.
git-svn-id: trunk@26943 -
Cleaned up parameter and funcretloc information generation in AVR paramanger, and made it closer to GCC's calling convention.
Fixed a number of codegenerator bugs generating invalid or broken instructions: CP operands were swapped, a number of instructions had immediate operands, and stack frame epilogue wasn't complete.
Added a bunch of peephole optimizations that clears the generated code up a lot.
git-svn-id: trunk@26925 -
contains the tcgsize of the entire parameter rather than only of
what is left (-> calculate it from the remaining parameter length)
git-svn-id: trunk@24776 -
paramgr.pas, tparamanager:
+ add new method "handle_common_ret_in_param"
* extract common code (safecall + record constructor handling) from "ret_in_param" to "handle_common_ret_in_param" and call the latter in "ret_in_param"
[aarch64,arm,avr,i386,x86_64]/cpupara.pas, tCPUparamanager.ret_in_param:
* call "handle_common_ret_in_param" instead of implementing the same check again and again
ncgcal.pas, tcgcallnode.handle_return_value:
* move the check for (record) constructors to "tparamanager.handle_common_ret_in_param"
git-svn-id: trunk@23520 -
that the type of the parameters can be determined automatically
o added compilerproc declarations for all helpers called in the compiler
via their assembler name, so we can look up the corresponding procdef
git-svn-id: trunk@23325 -
getintparaloc + adapted all call sites of getintparaloc. This
led to a number of additional, related changes:
o corrected the type information for some getintparaloc parameters
o don't allocate some intparalocs in cases they aren't used
o changed "const tvardata" parameter into "constref tvardata" for
fpc_variant_copy_overwrite to make pass-by-reference semantics
explicit
o moved a number of routines that now have to call find_system_type()
from cgobj to hlcgobj so that cgobj doesn't have to start depending
on the symtable unit
o added versions of the cpureg alloc/dealloc methods to hlcgobj that
call through to their cgobj counter parts, so we can call save/restore
the cpu registers before/after calling system helpers from hlcgobj
(not implemented in hlcgobj itself, because all basic register
allocator functionality is still part of cgobj/cgcpu)
git-svn-id: trunk@21696 -
* set tcgpara.def for the function return location (field introduced for and
already used by the JVM code generator, required for future hlcg
functionality)
git-svn-id: trunk@21691 -
the IInterface implementation to be XPCom-compatible
--- Merging r15997 through r16179 into '.':
U rtl/inc/variants.pp
U rtl/inc/objpash.inc
U rtl/inc/objpas.inc
U rtl/objpas/classes/persist.inc
U rtl/objpas/classes/compon.inc
U rtl/objpas/classes/classesh.inc
A tests/test/tconstref1.pp
A tests/test/tconstref2.pp
A tests/test/tconstref3.pp
U tests/test/tinterface4.pp
A tests/test/tconstref4.pp
U tests/webtbs/tw10897.pp
U tests/webtbs/tw4086.pp
U tests/webtbs/tw15363.pp
U tests/webtbs/tw2177.pp
U tests/webtbs/tw16592.pp
U tests/tbs/tb0546.pp
U compiler/sparc/cpupara.pas
U compiler/i386/cpupara.pas
U compiler/pdecsub.pas
U compiler/symdef.pas
U compiler/powerpc/cpupara.pas
U compiler/avr/cpupara.pas
U compiler/browcol.pas
U compiler/defcmp.pas
U compiler/powerpc64/cpupara.pas
U compiler/ncgrtti.pas
U compiler/x86_64/cpupara.pas
U compiler/opttail.pas
U compiler/htypechk.pas
U compiler/tokens.pas
U compiler/objcutil.pas
U compiler/ncal.pas
U compiler/symtable.pas
U compiler/symsym.pas
U compiler/m68k/cpupara.pas
U compiler/regvars.pas
U compiler/arm/cpupara.pas
U compiler/symconst.pas
U compiler/mips/cpupara.pas
U compiler/paramgr.pas
U compiler/psub.pas
U compiler/pdecvar.pas
U compiler/dbgstabs.pas
U compiler/options.pas
U packages/fcl-fpcunit/src/testutils.pp
git-svn-id: trunk@16180 -
+ support for nested procedural variables:
o activate using {$modeswitch nestedprocvars} (compatible with all
regular syntax modes, enabled by default for MacPas mode)
o activating this mode switch changes the way the frame pointer is
passed to nested routines into the same way that Delphi uses (always
passed via the stack, and if necessary removed from the stack by
the caller) -- Todo: possibly also allow using this parameter
passing convention without enabling nested procvars, maybe even
by default in Delphi mode, see mantis #9432
o both global and nested routines can be passed to/assigned to a
nested procvar (and called via them). Note that converting global
*procvars* to nested procvars is intentionally not supported, so
that this functionality can also be implemented via compile-time
generated trampolines if necessary (e.g. for LLVM or CIL backends
as long as they don't support the aforementioned parameter passing
convention)
o a nested procvar can both be declared using a Mac/ISO Pascal style
"inline" type declaration as a parameter type, or as a stand-alone
type (in the latter case, add "is nested" at the end in analogy to
"of object" for method pointers -- note that using variables of
such a type is dangerous, because if you call them once the enclosing
stack frame no longer exists on the stack, the results are
undefined; this is however allowed for Metaware Pascal compatibility)
git-svn-id: trunk@15694 -
represent complex locations (required for full x86-64 ABI support,
which is not yet implemented) -> lots of special result handling
code has been removed and replaced by the parameter handling
routines
+ added support for composite parameters (and hence function
results) to tcg.a_load_ref_cgpara() (so it can be used for
handling, e.g., 64 bit parameters on 32 bit platforms)
* the above fixed writing past the end of allocated memory when
handling records returned in registers on x86-64 whose size is
not a multiple of 8 bytes (mantis #16357)
- removed the x86-64 and PPC specific versions of a_load_ref_cgpara(),
as they are now handled correctly by the generic version
* moved the responsibility of allocating tcgpara cpu registers
(using paramanager.allocparaloc()) from the callers of
cg.a_load*_cgpara() to the cg.a_load*_cgpara() methods
themselves (so the register allocation can be done efficiently
when dealing with function results)
* for the above, renamed paramanager.alloc/freeparaloc() to
paramanager.alloc/freecgpara(), and use paramanager.allocparaloc()
to allocate individual pcgparalocations instead
* fixed the register size of SSE2 function result registers for
x86-64 (when used for floating point), which results in removing
a few superfluous "movs? %xmm0,%xmm0" instructions
* fixed compilation of paramanagers of avr, m68k and mips after r13695
and also updated them for these new changes
git-svn-id: trunk@15350 -
forced to something else by the compiler (internal rtl functions etc),
necessary for the objc branch
* fixed adding all used function result registers to the list of
registers that may need to be saved before a function call
git-svn-id: trunk@13695 -
http://svn.freepascal.org/svn/fpc/branches/avr
........
r5891 | florian | 2007-01-11 17:30:12 +0100 (Do, 11 Jan 2007) | 2 lines
+ some initial work
........
r10170 | florian | 2008-02-03 11:02:04 +0100 (So, 03 Feb 2008) | 2 lines
* continued to work on avr port
........
r10180 | florian | 2008-02-03 15:29:30 +0100 (So, 03 Feb 2008) | 2 lines
+ a lot of skeleton code for avr added
........
git-svn-id: trunk@10186 -
