* Unified fpc_initialize_array,fpc_finalize_array with fpc_decref_array and fpc_addref_array by removing 'size' parameter from the former two. Element size is easily calculated from RTTI, so omitting it simplifies code generation. All four helpers are now callable by tcg.g_array_rtti_helper().
* ncgutil.pas: initialization of open array out-parameters is now done properly (using fpc_initialize_array).
+ Test
git-svn-id: trunk@17081 -
and no language features requiring initialization are used,
do not initialize units, but just configure the fpu and
signal handlers.
git-svn-id: trunk@16124 -
compiler assumes it remains a sec_code (fixes linking problems with the
iOS SDK 3.2 simulator tool chain when using debug info)
git-svn-id: trunk@16119 -
be used outside the code generator
* renamed tabstractprocdef.requiredargarea into callerargareasize,
and also added calleeargareasize field; added init_paraloc_info(side)
method to init the parameter locations and init those size fields and
replaced all "if not procdef.has_paraloc_info then ..." blocks with
procdef.init_paraloc_info(callersize)"
* moved detection of stack tainting parameters from psub to
symdef/tabstractprocdef
+ added tcallparanode.contains_stack_tainting_call(), which detects
whether a parameter contains a call that makes use of stack paramters
* record for each parameter whether or not any following parameter
contains a call with stack parameters; if not, in case the current
parameter itself is a stack parameter immediately place it in its
final location also for use_fixed_stack platforms rather than
first putting it in a temporary location (part of mantis #17442)
* on use_fixed_stack platforms, always first evaluate parameters
containing a stack tainting call, since those force any preceding
stack parameters of the current call to be stored in a temp location
and copied to the final location afterwards
git-svn-id: trunk@16050 -
+ support for nested procedural variables:
o activate using {$modeswitch nestedprocvars} (compatible with all
regular syntax modes, enabled by default for MacPas mode)
o activating this mode switch changes the way the frame pointer is
passed to nested routines into the same way that Delphi uses (always
passed via the stack, and if necessary removed from the stack by
the caller) -- Todo: possibly also allow using this parameter
passing convention without enabling nested procvars, maybe even
by default in Delphi mode, see mantis #9432
o both global and nested routines can be passed to/assigned to a
nested procvar (and called via them). Note that converting global
*procvars* to nested procvars is intentionally not supported, so
that this functionality can also be implemented via compile-time
generated trampolines if necessary (e.g. for LLVM or CIL backends
as long as they don't support the aforementioned parameter passing
convention)
o a nested procvar can both be declared using a Mac/ISO Pascal style
"inline" type declaration as a parameter type, or as a stand-alone
type (in the latter case, add "is nested" at the end in analogy to
"of object" for method pointers -- note that using variables of
such a type is dangerous, because if you call them once the enclosing
stack frame no longer exists on the stack, the results are
undefined; this is however allowed for Metaware Pascal compatibility)
git-svn-id: trunk@15694 -
- sort of reverted r14134, which is no longer required after the above
change (new_section() inserts the alignment itself)
* made the tai_section.create() constructor private so it cannot be
called directly anymore
git-svn-id: trunk@15482 -
(the ABIs that prescribe special treatment for aggregates with one
scalar element don't either, since a "union containing a single scalar"
is not the same as a scalar)
* fixed passing record with a single float field on PowerPC/AIX abi's
* several changes to cgobj and ncgutil to correctly deal with transfering
such records between integer and floating point registers
git-svn-id: trunk@15416 -
x86-64 platforms (except for win64, which uses another ABI and which
already complied to it) + test
* fixed returning records containing 1 single or double field on darwin/i386,
these have to be returned via ST0 instead of as a regular record
* added support for LOC_FPUREGISTER and LOC_MMREGISTER in several places
where they can now occur due to the previous two changes
* made a few internalerrors unique
git-svn-id: trunk@15368 -
represent complex locations (required for full x86-64 ABI support,
which is not yet implemented) -> lots of special result handling
code has been removed and replaced by the parameter handling
routines
+ added support for composite parameters (and hence function
results) to tcg.a_load_ref_cgpara() (so it can be used for
handling, e.g., 64 bit parameters on 32 bit platforms)
* the above fixed writing past the end of allocated memory when
handling records returned in registers on x86-64 whose size is
not a multiple of 8 bytes (mantis #16357)
- removed the x86-64 and PPC specific versions of a_load_ref_cgpara(),
as they are now handled correctly by the generic version
* moved the responsibility of allocating tcgpara cpu registers
(using paramanager.allocparaloc()) from the callers of
cg.a_load*_cgpara() to the cg.a_load*_cgpara() methods
themselves (so the register allocation can be done efficiently
when dealing with function results)
* for the above, renamed paramanager.alloc/freeparaloc() to
paramanager.alloc/freecgpara(), and use paramanager.allocparaloc()
to allocate individual pcgparalocations instead
* fixed the register size of SSE2 function result registers for
x86-64 (when used for floating point), which results in removing
a few superfluous "movs? %xmm0,%xmm0" instructions
* fixed compilation of paramanagers of avr, m68k and mips after r13695
and also updated them for these new changes
git-svn-id: trunk@15350 -
tobjectdef.needs_inittable returns false for classes nowadays (and already
since quite some time)
* nevertheless replaced all usages in the compiler of x.needs_inittable with
is_managed_type(x) (in case some other condition is added again in the
future) and removed all remaining accompanying "and not is_class(x)"
checks
git-svn-id: trunk@15320 -
ncgutil it can be used elsewhere too
- removed the code that checks for 64 bit integer types in the float
para loading code, since is_64bit() can never return true for a
floatdef
git-svn-id: trunk@15318 -
the opposite meaning, af_stabs_use_function_absolute_addresses), because it
is different on Darwin for the internal and external assembler)
git-svn-id: trunk@14342 -
+ RTL support:
o VFP exceptions are disabled by default on Darwin,
because they cause kernel panics on iPhoneOS 2.2.1 at least
o all denormals are truncated to 0 on Darwin, because disabling
that also causes kernel panics on iPhoneOS 2.2.1 (probably
because otherwise denormals can also cause exceptions)
* set softfloat rounding mode correctly for non-wince/darwin/vfp
targets
+ compiler support: only half the number of single precision
registers is available due to limitations of the register
allocator
+ added a number of comments about why the stackframe on ARM is
set up the way it is by the compiler
+ added regtype and subregtype info to regsets, because they're
also used for VFP registers (+ support in assembler reader)
+ various generic support routines for dealing with floating point
values located in integer registers that have to be transferred to
mm registers (needed for VFP)
* renamed use_sse() to use_vectorfpu() and also use it for
ARM/vfp support
o only superficially tested for Linux (compiler compiled with -Cpvfpv6
-Cfvfpv2 works on a Cortex-A8, no testsuite run performed -- at least
the fpu exception handler still needs to be implemented), Darwin has
been tested more thoroughly
+ added ARMv6 cpu type and made it default for Darwin/ARM
+ ARMv6+ implementations of atomic operations using ldrex/strex
* don't use r9 on Darwin/ARM, as it's reserved under certain
circumstances (don't know yet which ones)
* changed C-test object files for ARM/Darwin to ARMv6 versions
* check in assembler reader that regsets are not empty, because
instructions with a regset operand have undefined behaviour in that
case
* fixed resultdef of tarmtypeconvnode.first_int_to_real in case of
int64->single type conversion
* fixed constant pool locations in case 64 bit constants are generated,
and/or when vfp instructions with limited reach are present
WARNING: when using VFP on an ARMv6 or later cpu, you *must* compile all
code with -Cparmv6 (or higher), or you will get crashes. The reason is
that storing/restoring multiple VFP registers must happen using
different instructions on pre/post-ARMv6.
git-svn-id: trunk@14317 -
-- Zusammenführen der Unterschiede zwischen Projektarchiv-URLs in ».«:
U rtl/arm/setjump.inc
A rtl/arm/thumb2.inc
U rtl/arm/divide.inc
A rtl/embedded/arm/stm32f103.pp
U rtl/inc/system.inc
U compiler/alpha/cgcpu.pas
U compiler/sparc/cgcpu.pas
U compiler/i386/cgcpu.pas
U compiler/ncgld.pas
U compiler/powerpc/cgcpu.pas
U compiler/avr/cgcpu.pas
U compiler/aggas.pas
U compiler/powerpc64/cgcpu.pas
U compiler/x86_64/cgcpu.pas
U compiler/cgobj.pas
U compiler/psystem.pas
U compiler/aasmtai.pas
U compiler/m68k/cgcpu.pas
U compiler/ncgutil.pas
U compiler/rautils.pas
U compiler/arm/raarmgas.pas
U compiler/arm/armatts.inc
U compiler/arm/cgcpu.pas
U compiler/arm/armins.dat
U compiler/arm/rgcpu.pas
U compiler/arm/cpubase.pas
U compiler/arm/agarmgas.pas
U compiler/arm/cpuinfo.pas
U compiler/arm/armop.inc
U compiler/arm/narmadd.pas
U compiler/arm/aoptcpu.pas
U compiler/arm/armatt.inc
U compiler/arm/aasmcpu.pas
U compiler/systems/t_embed.pas
U compiler/psub.pas
U compiler/options.pas
git-svn-id: trunk@13801 -
starting with a previous 2.3.1 or compiler built from the objc branch
+ added basic objcprotocol support (only for external protocols
currently)
o use in type declaration: "type xp = objcprotocol ... end;"
o when defining a root class that implements it:
"type yc = objcclass(xp) ... end" (note: no support yet
for something like "objcclass(id,xp)" or so)
o when defining a non-root class that implements a protocol:
"type zc = objcclass(nsobject,xp) ... end"
o includes support for "required" and "optional" sections
o no support yet for the objcprotocol(<protocol>) expression
that enables getting a class instance representing the
protocol (e.g., for use with "conformsToProtocol:")
o message names have to specified in protocol declarations,
but if an objcclass implements a protocol, the message names do
not have to be repeated (but if they are, they have to match;
the same goes when overriding inherited methods)
+ allow specifying the external name of Objective-C classes and
protocols, since classes and protocols can have the same name
(and you cannot use the same Pascal identifier in such caseq)
+ added NSObject protocol, and make the NSObject class use it
+ added missing NSObject class methods that have the same name
as instance methods (added "class" name prefix to avoid clashes)
* fixed several cases where the compiler did not treat Objective-C
classes/protocols the same as Object Pascal classes/interfaces
(a.o., forward declarations, alignment, regvars, several type
conversions, ...)
* allow "override" directive in objcclass declarations, and print
a hint if it's forgotten in an external declaration (because it
doesn't really matter there, and may make automated header
conversion harder than necessary) and an error if will be used in
a non-external declaration (because it is not possible to start
a new vmt entry-tree in Objective-C, you can only override parent
methods)
* reject objcclasses/protocols as parameters to typeof()
* don't try to test VMT validity of objcclasses/protocols
git-svn-id: branches/objc@13375 -
o support for declaring external Objective-C classes (see
rtl/inc/objcbase.pas), including derived classes
o support for converting methods of objcclasses into selectors
(see tests/test/tobjc1.pp)
o support for loading from/storing to fields of objcclasses
o support for calling Objective-C methods using regular
Object Pascal syntax (see tests/test/tobjc1.pp)
o some things that are known to be not yet working:
o automatic conversion from ID to objcclasses and back
o declaring and implementing new objcclasses/methods in Pascal code
o debug information (objcclasses are currently plain pointers
as far as the debugger knows)
git-svn-id: branches/objc@13162 -
initialization code of units/programs, because they are already
zero and initializing them explicitly is Delphi-incompatible
(mantis #13345)
git-svn-id: trunk@13042 -
physical registers
* free the physical return registers at the caller side for 64 bit
systems
* make sure that we do not double-free registers in case a return
value is not used (mantis #13536)
git-svn-id: trunk@13023 -
when they are not used in the unit where they are defined (since they
may be used elsewhere, discovered while analyzing mantis #13345)
git-svn-id: trunk@12954 -
alignment for each memory reference (mantis #12137, and
test/packages/fcl-registry/tregistry1.pp on sparc). This also
enables better code generation for packed records in many cases.
o several changes were made to the compiler to minimise the chances
of accidentally forgetting to set the alignment of memory references
in the future:
- reference_reset*() now has an extra alignment parameter
- location_reset() can now only be used for non LOC_(C)REFERENCE,
use location_reset_ref() for those (split the tloc enum so the
compiler can catch errors using range checking)
git-svn-id: trunk@12719 -
shortstring temps don't get maximum alignment)
* changed some gettemptyed() calls into gettemp() calls (gettemptyped
means that this temp can only be used for temps of that type,
which is necessary for refcounted types but not for floats)
git-svn-id: trunk@12036 -
the syntax is exactly the same as for "external", except for
the keyword. It is currently only active for Darwin targets.
It should also work at least for Linux targets, but only with
the GNU assembler (which is why it is not activated there)
+ test for this functionality
git-svn-id: trunk@12009 -
