that the type of the parameters can be determined automatically
o added compilerproc declarations for all helpers called in the compiler
via their assembler name, so we can look up the corresponding procdef
git-svn-id: trunk@23325 -
fixes a couple of arm-embedded stuff,
adds some controllers, start of fpv4_s16 support, for a complete list of
changes see below:
------------------------------------------------------------------------
r22787 | laksen | 2012-10-20 22:00:36 +0200 (Sa, 20 Okt 2012) | 1 line
Properly do NR_DEFAULTFLAGS detection/allocation/deallocation
------------------------------------------------------------------------
r22782 | laksen | 2012-10-20 07:44:55 +0200 (Sa, 20 Okt 2012) | 1 line
Fixed flags detections code for wide->short optimization code for Thumb-2
------------------------------------------------------------------------
r22778 | laksen | 2012-10-19 20:23:14 +0200 (Fr, 19 Okt 2012) | 1 line
Added coprocessor registers, and support for 6 operands(MCR/MRC instructions, etc)
------------------------------------------------------------------------
r22647 | laksen | 2012-10-14 21:28:08 +0200 (So, 14 Okt 2012) | 1 line
Added register specifications to lpc1768.pp. From Joan Duran
------------------------------------------------------------------------
r22646 | laksen | 2012-10-14 21:10:20 +0200 (So, 14 Okt 2012) | 4 lines
Fixed some minor formating issues
Implemented a small heap mananger
Implemented console IO
Changed default LineEnding to CrLf(to ease console IO parsing)
------------------------------------------------------------------------
r22599 | laksen | 2012-10-09 08:58:58 +0200 (Di, 09 Okt 2012) | 1 line
Added all STM32F1 configurations
------------------------------------------------------------------------
r22597 | laksen | 2012-10-08 22:10:45 +0200 (Mo, 08 Okt 2012) | 1 line
Added initial support for the Cortex-M4F FPv4_S16 FPU
------------------------------------------------------------------------
r22596 | laksen | 2012-10-08 22:04:14 +0200 (Mo, 08 Okt 2012) | 1 line
Added FPv4_d16 FPU instructions, and a few extra registers
------------------------------------------------------------------------
r22592 | laksen | 2012-10-08 16:07:40 +0200 (Mo, 08 Okt 2012) | 2 lines
Added support for IT block merging
Added a peephole pattern check for UXTB->UXTH chains
------------------------------------------------------------------------
r22590 | laksen | 2012-10-08 14:30:00 +0200 (Mo, 08 Okt 2012) | 3 lines
Add CBNZ/CBZ instructions
Create preliminary Thumb-2 PeepHoleOptPass2 code, hacked together from the ARM mode code
Added a number of simple size optimizations for common Thumb-2 instructions
------------------------------------------------------------------------
r22582 | laksen | 2012-10-08 06:49:39 +0200 (Mo, 08 Okt 2012) | 3 lines
Fix optimizations of Thumb-2 code
Fix problem with loading of condition operand for IT instructions
Properly split IT blocks when register allocator tries to spill inside a block.
------------------------------------------------------------------------
r22581 | laksen | 2012-10-08 05:15:40 +0200 (Mo, 08 Okt 2012) | 4 lines
Fixed assembler calling command line for cpus>ARMv5TE. EDSP instructions will generate errors while assembling, due to RTL assembler routines
Updated boot code for all Cortex-M3 controllers, and sc32442b to use weak linking for exception tables.
Cortex-M3 devices now also share initialization routine to simplify maintenance
STM32F10x classes now have specific units which fit the interrupt source names and counts
------------------------------------------------------------------------
r22580 | laksen | 2012-10-08 05:10:44 +0200 (Mo, 08 Okt 2012) | 2 lines
Added support for .section, .set, .weak, and .thumb_set directive for GAS assembler reader
IFDEF'ed JVM specific assembler directives, to prevent ait_* set to exceed 32 elements
------------------------------------------------------------------------
r22579 | laksen | 2012-10-08 02:10:52 +0200 (Mo, 08 Okt 2012) | 3 lines
Remove all traces of the interrupt vector table generation mechanism
Clean up cpuinfo tables
Fixed ARMv7M bug(BLX <label> doesn't exist on that version)
git-svn-id: trunk@22792 -
(avoids imaginary register number in "# Var I in register .." assembler comments.
* dbgdwarf.pas : Support register variables as register pairs.
Does not yet handle case of changing registers.
* symsym.pas : add currentregloc field to tabstractnormalvarsym class,
to be able to track changing registers used for a given variable.
* aasmtai.pas : Update currentregloc field of tai_varloc.create sym parameter.
* ncgutil.pas : Only generate a tai_varloc if the new registers are different for the variable.
git-svn-id: trunk@22508 -
the result location is a simple location (a single register/reference)
(mantis #22490)
* print an error when accessing "result" in a nostack pure assembler routine
if the result location is not simple
git-svn-id: trunk@22166 -
psub.pas: Use new fpc_compiler_has_fixup_jmps conditional.
mips/aasmcpu.pas: MIPS specific fixup_jmps function,
The insttruction distance calculation is not exact as
some pseudo-instruction can be expanded to a variable number of real instructions
real calculation would only be possible if we first
convert pseudo-instuctions to real instructions before calling fixup_jmps.
ncgutil.pas: Revert commit r21791
ncgcon.pas: Revert commit r21786
mips/cgcpu.pas: Partial revert of commit r21798, no need to always use A_J,
as fixup_jmps now handles out of range branches.
git-svn-id: trunk@21822 -
getintparaloc + adapted all call sites of getintparaloc. This
led to a number of additional, related changes:
o corrected the type information for some getintparaloc parameters
o don't allocate some intparalocs in cases they aren't used
o changed "const tvardata" parameter into "constref tvardata" for
fpc_variant_copy_overwrite to make pass-by-reference semantics
explicit
o moved a number of routines that now have to call find_system_type()
from cgobj to hlcgobj so that cgobj doesn't have to start depending
on the symtable unit
o added versions of the cpureg alloc/dealloc methods to hlcgobj that
call through to their cgobj counter parts, so we can call save/restore
the cpu registers before/after calling system helpers from hlcgobj
(not implemented in hlcgobj itself, because all basic register
allocator functionality is still part of cgobj/cgcpu)
git-svn-id: trunk@21696 -
and also use this code to trash local variables in inlined routines
o fixes mantis #22088
o makes it possible to also implement it for the jvm target in the future
git-svn-id: trunk@21393 -
+ implement trashing of local variables if subroutine is inlined
* fix some errors releated to interproc. gotos and inlining
+ node_count function
* inline cannot be used with iochecking and safecall calling conventions
* track inherited usage
* don't inline if inherited is used
git-svn-id: trunk@21335 -
future use by high level code generator targets
o this in turn required that all a_load*_loc* methods are called via
hlcg rather than via cg, since a location can be a subsetref/reg and
and those are no longer handled in tcg
o that then required moving several force_location_* routines into
thlcg because they use a_load_loc*, but did not take tdef size
parameters (which are required by the thlcg a_load_loc* routines)
o the only practical consequence is that from now on, you have to
use hlcg.location_force_mem/reg() (fpureg not yet) and
hlcg.gen_load_loc_cgpara() instead of the removed versions from ncgutil,
and hlcg.a_load*loc*() instead of cg.a_load*loc* if a subsetref/reg
might be involved
git-svn-id: trunk@21287 -
on AIX due to the extra inserted local symbols (although in case e.g
multiple procedures contain a typed constant with the same name, only
one can be accessible)
* removed '.' suffix of local symbols inserted for debug info of typed
constants for AIX (gdb couldn't find those symbols; it seems the
address calculated by gdb for typed constants is still not correct
though)
git-svn-id: trunk@20966 -
assume that all virtual methods that can be called via interfaces that
appear in the program are in fact called (fixes WPO when applied to
MSEIDE)
git-svn-id: trunk@20952 -
o support for the new codepage-aware ansistrings in the jvm branch
o empty ansistrings are now always represented by a nil pointer rather than
by an empty string, because an empty string also has a code page which
can confuse code (although this will make ansistrings harder to use
in Java code)
o more string helpers code shared between the general and jvm rtl
o support for indexbyte/word in the jvm rtl (warning: first parameter
is an open array rather than an untyped parameter there, so
indexchar(pcharvar^,10,0) will be equivalent to
indexchar[pcharvar^],10,0) there, which is different from what is
intended; changing it to an untyped parameter wouldn't help though)
o default() support is not yet complete
o calling fpcres is currently broken due to limitations in
sysutils.executeprocess() regarding handling unix quoting and
the compiler using the same command lines for scripts and directly
calling external programs
o compiling the Java compiler currently requires adding ALLOW_WARNINGS=1
to the make command line
git-svn-id: branches/jvmbackend@20887 -
support the stabx as understood by gdb, which is a mixture of regular
stabs and stabx (e.g., class/object definitions are completely different
in real stabx). This means that gdb can be used to debug aix programs,
but the native dbx will complain about lots of debug information
constructs
git-svn-id: trunk@20842 -
hence contains a dummy "main" that refers to the system unit
FPC_SYSTEMMAIN, which in turn jumps to the main program's PASCALMAIN
* we call FPC_SYSTEMMAIN instead of jumping to it like on Darwin, so that
the TOC gets set correctly
git-svn-id: trunk@20792 -
in LOC_CMMREGISTER, not in LOC_CFPUREGISTER (and they also are there in
case the softfp calling convention is used), and this change broke SPARC
git-svn-id: trunk@20667 -
o new eabihf (hard float) abi
o vfpv3_d16 variant of VFP (default variant used by EABI assemblers: VFPv3
with only 16 double registers instead of 32) and pass it to GNU as
o make the odd numbered single precision floating point VFP registers
available for explicit allocation for use by the calling convention
* fixed copy/paste error in stdname of S30 register
-> use -dFPC_ARMHF to create an ARM eabi hard float compiler
(mantis #21554)
git-svn-id: trunk@20660 -
in code and not in constants. In the case of primitive types constant nodes
are used while complex types like arrays, records and objects use a local
variable which is initialized to zero once at the entry of the method (the
variable is reused if Default() is used for the same type multiple times in
the same method). For this a new compilerproc was added which uses FillChar
to initialize the given memory area to zero.
This fixes Mantis #9420.
+ psystem.pas: Added Default symbol to system unit
+ htypechk.pas: Added function "is_valid_for_default" which checks recursively
whether the given type can be used with Default at all.
Forbidden types are files, helpers, ObjC and C++ types. This
check is used for records, arrays and objects only if the mode
is a non-Delphi one, as Delphi ignores these types on lower
levels.
+ msg/errore.msg: Added error message for unsupported types for Default()
+ symconst.pas: Added a new enum value vo_is_default_var which is used for the
local variables utilized by Default() so their initalization
and finalization can be avoided.
+ pexpr.pas: Add handling of Default() intrinsic to "statement_syssym"
+ ninl.pas: Extended tinlinenode by a method which returns the correct node for
a Default() and used that method in handle_typecheck.
* ncgutil.pas: Check for new flag "vo_is_default_var" when initializing and
finalizing local variables.
* ppu.pas: increase PPU version
+ psub.pas:
* Added a new routine which zeros defaultvars of a symtable.
* Use this routine inside "initializevars".
* Also use this routine to initialize the staticsymtable of the unit/program.
* Adjusted ppudump, because of the new enum value.
+ Added implementation of fpc_zeromem to system unit.
+ Added tests for Default()
git-svn-id: trunk@20629 -
* Modified fpc_ansistr_decr_ref and fpc_widestr_decr_ref so they always zero the pointer passed by reference. Other _decr_ref helpers already do it.
- Removed tcg.g_decrrefcount, calling cg.g_finalize instead.
- finalize_data_node and tcg.g_finalize: removed code generation for zeroing locations, because it is now done by RTL helpers. This further reduces code size.
As a total result of this change and r20118, the size of Lazarus executable is reduced by about 12%.
git-svn-id: trunk@20119 -
