fixes a couple of arm-embedded stuff,
adds some controllers, start of fpv4_s16 support, for a complete list of
changes see below:
------------------------------------------------------------------------
r22787 | laksen | 2012-10-20 22:00:36 +0200 (Sa, 20 Okt 2012) | 1 line
Properly do NR_DEFAULTFLAGS detection/allocation/deallocation
------------------------------------------------------------------------
r22782 | laksen | 2012-10-20 07:44:55 +0200 (Sa, 20 Okt 2012) | 1 line
Fixed flags detections code for wide->short optimization code for Thumb-2
------------------------------------------------------------------------
r22778 | laksen | 2012-10-19 20:23:14 +0200 (Fr, 19 Okt 2012) | 1 line
Added coprocessor registers, and support for 6 operands(MCR/MRC instructions, etc)
------------------------------------------------------------------------
r22647 | laksen | 2012-10-14 21:28:08 +0200 (So, 14 Okt 2012) | 1 line
Added register specifications to lpc1768.pp. From Joan Duran
------------------------------------------------------------------------
r22646 | laksen | 2012-10-14 21:10:20 +0200 (So, 14 Okt 2012) | 4 lines
Fixed some minor formating issues
Implemented a small heap mananger
Implemented console IO
Changed default LineEnding to CrLf(to ease console IO parsing)
------------------------------------------------------------------------
r22599 | laksen | 2012-10-09 08:58:58 +0200 (Di, 09 Okt 2012) | 1 line
Added all STM32F1 configurations
------------------------------------------------------------------------
r22597 | laksen | 2012-10-08 22:10:45 +0200 (Mo, 08 Okt 2012) | 1 line
Added initial support for the Cortex-M4F FPv4_S16 FPU
------------------------------------------------------------------------
r22596 | laksen | 2012-10-08 22:04:14 +0200 (Mo, 08 Okt 2012) | 1 line
Added FPv4_d16 FPU instructions, and a few extra registers
------------------------------------------------------------------------
r22592 | laksen | 2012-10-08 16:07:40 +0200 (Mo, 08 Okt 2012) | 2 lines
Added support for IT block merging
Added a peephole pattern check for UXTB->UXTH chains
------------------------------------------------------------------------
r22590 | laksen | 2012-10-08 14:30:00 +0200 (Mo, 08 Okt 2012) | 3 lines
Add CBNZ/CBZ instructions
Create preliminary Thumb-2 PeepHoleOptPass2 code, hacked together from the ARM mode code
Added a number of simple size optimizations for common Thumb-2 instructions
------------------------------------------------------------------------
r22582 | laksen | 2012-10-08 06:49:39 +0200 (Mo, 08 Okt 2012) | 3 lines
Fix optimizations of Thumb-2 code
Fix problem with loading of condition operand for IT instructions
Properly split IT blocks when register allocator tries to spill inside a block.
------------------------------------------------------------------------
r22581 | laksen | 2012-10-08 05:15:40 +0200 (Mo, 08 Okt 2012) | 4 lines
Fixed assembler calling command line for cpus>ARMv5TE. EDSP instructions will generate errors while assembling, due to RTL assembler routines
Updated boot code for all Cortex-M3 controllers, and sc32442b to use weak linking for exception tables.
Cortex-M3 devices now also share initialization routine to simplify maintenance
STM32F10x classes now have specific units which fit the interrupt source names and counts
------------------------------------------------------------------------
r22580 | laksen | 2012-10-08 05:10:44 +0200 (Mo, 08 Okt 2012) | 2 lines
Added support for .section, .set, .weak, and .thumb_set directive for GAS assembler reader
IFDEF'ed JVM specific assembler directives, to prevent ait_* set to exceed 32 elements
------------------------------------------------------------------------
r22579 | laksen | 2012-10-08 02:10:52 +0200 (Mo, 08 Okt 2012) | 3 lines
Remove all traces of the interrupt vector table generation mechanism
Clean up cpuinfo tables
Fixed ARMv7M bug(BLX <label> doesn't exist on that version)
git-svn-id: trunk@22792 -
(avoids imaginary register number in "# Var I in register .." assembler comments.
* dbgdwarf.pas : Support register variables as register pairs.
Does not yet handle case of changing registers.
* symsym.pas : add currentregloc field to tabstractnormalvarsym class,
to be able to track changing registers used for a given variable.
* aasmtai.pas : Update currentregloc field of tai_varloc.create sym parameter.
* ncgutil.pas : Only generate a tai_varloc if the new registers are different for the variable.
git-svn-id: trunk@22508 -
and add usermode parsing of LDM/STM ops
This patch basically extends the ARM assembly reader a bit to properly parse CPSR and
SPSR flags for the MSR opcode, and allows the reader to understand
the ^ modifer for register lists for STMxx and LDMxx.
Previously the following combinations weren't possible in straight assembler:
MRS R0, CPSR
MRS R0, SPSR
MSR CPSR_CX, R0
LDMIA SP, {R0-R15}^
etc..
git-svn-id: trunk@22502 -
o support for the new codepage-aware ansistrings in the jvm branch
o empty ansistrings are now always represented by a nil pointer rather than
by an empty string, because an empty string also has a code page which
can confuse code (although this will make ansistrings harder to use
in Java code)
o more string helpers code shared between the general and jvm rtl
o support for indexbyte/word in the jvm rtl (warning: first parameter
is an open array rather than an untyped parameter there, so
indexchar(pcharvar^,10,0) will be equivalent to
indexchar[pcharvar^],10,0) there, which is different from what is
intended; changing it to an untyped parameter wouldn't help though)
o default() support is not yet complete
o calling fpcres is currently broken due to limitations in
sysutils.executeprocess() regarding handling unix quoting and
the compiler using the same command lines for scripts and directly
calling external programs
o compiling the Java compiler currently requires adding ALLOW_WARNINGS=1
to the make command line
git-svn-id: branches/jvmbackend@20887 -
support the stabx as understood by gdb, which is a mixture of regular
stabs and stabx (e.g., class/object definitions are completely different
in real stabx). This means that gdb can be used to debug aix programs,
but the native dbx will complain about lots of debug information
constructs
git-svn-id: trunk@20842 -
* eliminate warnings in compiler (i386 & i368->x86_64) and minor refactorings
- comment out unused vars and types
- comment out unneeded comparisons (Longword <=> 0)
- suppress some "comparison always true|false" warnings
- tweak visiblity sections
git-svn-id: trunk@19385 -
o self is encoded as "this" for javac compatibility
+ ait_jvar (for the above) and ait_jcatch (similar, for future try/catch
support) classes
+ support for smallset JVM type encoding (as int)
git-svn-id: branches/jvmbackend@18354 -
from the unit initialisation sections to the variable declaration sections
to prevent the base units from overriding derived classes (based on patch
by Hans-Peter Dietrich, mantis #17516)
git-svn-id: trunk@16118 -
- sort of reverted r14134, which is no longer required after the above
change (new_section() inserts the alignment itself)
* made the tai_section.create() constructor private so it cannot be
called directly anymore
git-svn-id: trunk@15482 -
tai_const.size (fixes internalerror when using the internal Mach-O
assembler with DWARF debug info, patch by Dmitry Boyarintsev, mantis
#16640)
git-svn-id: trunk@15391 -
properties/behaviour of the equivalent of Extended in C (i.e., to
"long double" on i386 and x86_64 platforms that support a 10 byte
long double, and to "double" elsewhere)
git-svn-id: trunk@14912 -
mark_NoLineinfoEnd
* add "no line info" markers for try/except and try/finally internal cleanup
code, so the debugger doesn't jump back and forth between the end and start
of exception blocks when you arrive at the end
* honour "no line info" markers in dbgdwarf.pas
git-svn-id: trunk@14327 -
+ RTL support:
o VFP exceptions are disabled by default on Darwin,
because they cause kernel panics on iPhoneOS 2.2.1 at least
o all denormals are truncated to 0 on Darwin, because disabling
that also causes kernel panics on iPhoneOS 2.2.1 (probably
because otherwise denormals can also cause exceptions)
* set softfloat rounding mode correctly for non-wince/darwin/vfp
targets
+ compiler support: only half the number of single precision
registers is available due to limitations of the register
allocator
+ added a number of comments about why the stackframe on ARM is
set up the way it is by the compiler
+ added regtype and subregtype info to regsets, because they're
also used for VFP registers (+ support in assembler reader)
+ various generic support routines for dealing with floating point
values located in integer registers that have to be transferred to
mm registers (needed for VFP)
* renamed use_sse() to use_vectorfpu() and also use it for
ARM/vfp support
o only superficially tested for Linux (compiler compiled with -Cpvfpv6
-Cfvfpv2 works on a Cortex-A8, no testsuite run performed -- at least
the fpu exception handler still needs to be implemented), Darwin has
been tested more thoroughly
+ added ARMv6 cpu type and made it default for Darwin/ARM
+ ARMv6+ implementations of atomic operations using ldrex/strex
* don't use r9 on Darwin/ARM, as it's reserved under certain
circumstances (don't know yet which ones)
* changed C-test object files for ARM/Darwin to ARMv6 versions
* check in assembler reader that regsets are not empty, because
instructions with a regset operand have undefined behaviour in that
case
* fixed resultdef of tarmtypeconvnode.first_int_to_real in case of
int64->single type conversion
* fixed constant pool locations in case 64 bit constants are generated,
and/or when vfp instructions with limited reach are present
WARNING: when using VFP on an ARMv6 or later cpu, you *must* compile all
code with -Cparmv6 (or higher), or you will get crashes. The reason is
that storing/restoring multiple VFP registers must happen using
different instructions on pre/post-ARMv6.
git-svn-id: trunk@14317 -
-- Zusammenführen der Unterschiede zwischen Projektarchiv-URLs in ».«:
U rtl/arm/setjump.inc
A rtl/arm/thumb2.inc
U rtl/arm/divide.inc
A rtl/embedded/arm/stm32f103.pp
U rtl/inc/system.inc
U compiler/alpha/cgcpu.pas
U compiler/sparc/cgcpu.pas
U compiler/i386/cgcpu.pas
U compiler/ncgld.pas
U compiler/powerpc/cgcpu.pas
U compiler/avr/cgcpu.pas
U compiler/aggas.pas
U compiler/powerpc64/cgcpu.pas
U compiler/x86_64/cgcpu.pas
U compiler/cgobj.pas
U compiler/psystem.pas
U compiler/aasmtai.pas
U compiler/m68k/cgcpu.pas
U compiler/ncgutil.pas
U compiler/rautils.pas
U compiler/arm/raarmgas.pas
U compiler/arm/armatts.inc
U compiler/arm/cgcpu.pas
U compiler/arm/armins.dat
U compiler/arm/rgcpu.pas
U compiler/arm/cpubase.pas
U compiler/arm/agarmgas.pas
U compiler/arm/cpuinfo.pas
U compiler/arm/armop.inc
U compiler/arm/narmadd.pas
U compiler/arm/aoptcpu.pas
U compiler/arm/armatt.inc
U compiler/arm/aasmcpu.pas
U compiler/systems/t_embed.pas
U compiler/psub.pas
U compiler/options.pas
git-svn-id: trunk@13801 -
* the objc unit links against the Foundation instead of against the Cocoa
framework, and inludes an interface to either the fragile or non-fragile
obj-c run time depending on the target platform
+ support for the non-fragile Objective-C runtime/ABI, as used on Mac OS X
for ARM (iPhone) 64 bit (PowerPC/64, x86_64) -- all these targets now
are now also supported for the objectivec1 modeswitch
+ support for private_extern symbol bindings, required for the above
* mark objcclasses that are declared in the implementation section of a
unit as "hidden" (not sure what the effect is, since the Objective-C
runtime does not seem to do anything with this flag)
* enabled all obj-c tests for the newly supported platforms
git-svn-id: branches/objc@13763 -
register required classes:
+ add lazy references to classes referred to in the current unit
+ define reference symbols for classes defined in the current unit
+ add lazy references to parent classes of classes defined in the current
unit
git-svn-id: branches/objc@13679 -
alignment for each memory reference (mantis #12137, and
test/packages/fcl-registry/tregistry1.pp on sparc). This also
enables better code generation for packed records in many cases.
o several changes were made to the compiler to minimise the chances
of accidentally forgetting to set the alignment of memory references
in the future:
- reference_reset*() now has an extra alignment parameter
- location_reset() can now only be used for non LOC_(C)REFERENCE,
use location_reset_ref() for those (split the tloc enum so the
compiler can catch errors using range checking)
git-svn-id: trunk@12719 -
the syntax is exactly the same as for "external", except for
the keyword. It is currently only active for Darwin targets.
It should also work at least for Linux targets, but only with
the GNU assembler (which is why it is not activated there)
+ test for this functionality
git-svn-id: trunk@12009 -
a) cpu64bitaddr, which means that we are generating a compiler which
will generate code for targets with a 64 bit address space/abi
b) cpu64bitalu, which means that we are generating a compiler which
will generate code for a cpu with support for 64 bit integer
operations (possibly running in a 32 bit address space, depending
on the cpu64bitaddr define)
All cpus which had cpu64bit set now have both the above defines set,
and none of the 32 bit cpus have cpu64bitalu set (and none will
compile with it currently)
+ pint and puint types, similar to aint/aword (not pword because that
that conflicts with pword=^word)
* several changes from aint/aword to pint/pword
* some changes of tcgsize2size[OS_INT] to sizeof(pint)
git-svn-id: trunk@10320 -
- {$intpromotion common_type} or -CIcommon_type switches to common type promotion.
- {$intpromotion native_integer} or -CIcommon_type switches to current behaviour.
- Default in tp mode is common_type, native_integer in other modes
- Compiler can cycle with -CIcommon_type
- Still needs checking on other architectures than i386
git-svn-id: trunk@8118 -
from x86/aasmcpu to aasmtai and (new) aasmsym, so that when they're
finished they're available for all targets
* added dummy implementation of tai_cpu_abstract.pass1 and pass2 so there
are no more hundreds of warnings on non-x86 about constructing taicpu
instances with abstract methods
git-svn-id: trunk@5787 -
getjumplabel and added type para to getlabel for specific types
* moved lineinfo generation from assemble and aggas to dbgstabs
git-svn-id: trunk@1120 -
+ refaddr to treference added
+ refsymbol to treference added
* top_local stuff moved to an extra record to save memory
+ aint introduced
* tppufile.get/putint64/aint implemented
removes moves of that particular register type. This is necessary so
we don't remove the live_start instruction of a register before it
has been processed
