returned on the x87 fpu stack on x86-64
o also handle the fact that this means that we'll generated float
loads/stores with OS_128/OS_F128 in case the surrounding record
is padded to a multiple of its alignment
git-svn-id: trunk@28985 -
that the type of the parameters can be determined automatically
o added compilerproc declarations for all helpers called in the compiler
via their assembler name, so we can look up the corresponding procdef
git-svn-id: trunk@23325 -
getintparaloc + adapted all call sites of getintparaloc. This
led to a number of additional, related changes:
o corrected the type information for some getintparaloc parameters
o don't allocate some intparalocs in cases they aren't used
o changed "const tvardata" parameter into "constref tvardata" for
fpc_variant_copy_overwrite to make pass-by-reference semantics
explicit
o moved a number of routines that now have to call find_system_type()
from cgobj to hlcgobj so that cgobj doesn't have to start depending
on the symtable unit
o added versions of the cpureg alloc/dealloc methods to hlcgobj that
call through to their cgobj counter parts, so we can call save/restore
the cpu registers before/after calling system helpers from hlcgobj
(not implemented in hlcgobj itself, because all basic register
allocator functionality is still part of cgobj/cgcpu)
git-svn-id: trunk@21696 -
* Insert seh_endprologue directive after the last prologue instruction, not before it
* Omit seh_stackalloc for zero bytes
* (For now) ignore SEH directives in NASM and MASM writers, instead of failing with internal error.
git-svn-id: trunk@19246 -
* For now placed actual processing of unwind info under {$ifdef TEST_WIN64_UNWIND}, because in the current state it doesn't add much value.
git-svn-id: trunk@19200 -
* $CPU/cgcpu.pas: disable the generation of VMT loading code
* dbgstabs.pas, dbgdwarf.pas: treat virtual methods of helpers as normal methods
* ncgcal.pas: don't register virtual helper methods for WPO
* ncgrtti.pas: write virtual helper methods as normal methods to RTTI
* nobj.pas: correctly handle final and override cases in helpers
* pdecvar.pas: property getters
* rautils.pas: no VMT offset in records
git-svn-id: branches/svenbarth/classhelpers@17150 -
x86-64 platforms (except for win64, which uses another ABI and which
already complied to it) + test
* fixed returning records containing 1 single or double field on darwin/i386,
these have to be returned via ST0 instead of as a regular record
* added support for LOC_FPUREGISTER and LOC_MMREGISTER in several places
where they can now occur due to the previous two changes
* made a few internalerrors unique
git-svn-id: trunk@15368 -
represent complex locations (required for full x86-64 ABI support,
which is not yet implemented) -> lots of special result handling
code has been removed and replaced by the parameter handling
routines
+ added support for composite parameters (and hence function
results) to tcg.a_load_ref_cgpara() (so it can be used for
handling, e.g., 64 bit parameters on 32 bit platforms)
* the above fixed writing past the end of allocated memory when
handling records returned in registers on x86-64 whose size is
not a multiple of 8 bytes (mantis #16357)
- removed the x86-64 and PPC specific versions of a_load_ref_cgpara(),
as they are now handled correctly by the generic version
* moved the responsibility of allocating tcgpara cpu registers
(using paramanager.allocparaloc()) from the callers of
cg.a_load*_cgpara() to the cg.a_load*_cgpara() methods
themselves (so the register allocation can be done efficiently
when dealing with function results)
* for the above, renamed paramanager.alloc/freeparaloc() to
paramanager.alloc/freecgpara(), and use paramanager.allocparaloc()
to allocate individual pcgparalocations instead
* fixed the register size of SSE2 function result registers for
x86-64 (when used for floating point), which results in removing
a few superfluous "movs? %xmm0,%xmm0" instructions
* fixed compilation of paramanagers of avr, m68k and mips after r13695
and also updated them for these new changes
git-svn-id: trunk@15350 -
+ RTL support:
o VFP exceptions are disabled by default on Darwin,
because they cause kernel panics on iPhoneOS 2.2.1 at least
o all denormals are truncated to 0 on Darwin, because disabling
that also causes kernel panics on iPhoneOS 2.2.1 (probably
because otherwise denormals can also cause exceptions)
* set softfloat rounding mode correctly for non-wince/darwin/vfp
targets
+ compiler support: only half the number of single precision
registers is available due to limitations of the register
allocator
+ added a number of comments about why the stackframe on ARM is
set up the way it is by the compiler
+ added regtype and subregtype info to regsets, because they're
also used for VFP registers (+ support in assembler reader)
+ various generic support routines for dealing with floating point
values located in integer registers that have to be transferred to
mm registers (needed for VFP)
* renamed use_sse() to use_vectorfpu() and also use it for
ARM/vfp support
o only superficially tested for Linux (compiler compiled with -Cpvfpv6
-Cfvfpv2 works on a Cortex-A8, no testsuite run performed -- at least
the fpu exception handler still needs to be implemented), Darwin has
been tested more thoroughly
+ added ARMv6 cpu type and made it default for Darwin/ARM
+ ARMv6+ implementations of atomic operations using ldrex/strex
* don't use r9 on Darwin/ARM, as it's reserved under certain
circumstances (don't know yet which ones)
* changed C-test object files for ARM/Darwin to ARMv6 versions
* check in assembler reader that regsets are not empty, because
instructions with a regset operand have undefined behaviour in that
case
* fixed resultdef of tarmtypeconvnode.first_int_to_real in case of
int64->single type conversion
* fixed constant pool locations in case 64 bit constants are generated,
and/or when vfp instructions with limited reach are present
WARNING: when using VFP on an ARMv6 or later cpu, you *must* compile all
code with -Cparmv6 (or higher), or you will get crashes. The reason is
that storing/restoring multiple VFP registers must happen using
different instructions on pre/post-ARMv6.
git-svn-id: trunk@14317 -
-- Zusammenführen der Unterschiede zwischen Projektarchiv-URLs in ».«:
U rtl/arm/setjump.inc
A rtl/arm/thumb2.inc
U rtl/arm/divide.inc
A rtl/embedded/arm/stm32f103.pp
U rtl/inc/system.inc
U compiler/alpha/cgcpu.pas
U compiler/sparc/cgcpu.pas
U compiler/i386/cgcpu.pas
U compiler/ncgld.pas
U compiler/powerpc/cgcpu.pas
U compiler/avr/cgcpu.pas
U compiler/aggas.pas
U compiler/powerpc64/cgcpu.pas
U compiler/x86_64/cgcpu.pas
U compiler/cgobj.pas
U compiler/psystem.pas
U compiler/aasmtai.pas
U compiler/m68k/cgcpu.pas
U compiler/ncgutil.pas
U compiler/rautils.pas
U compiler/arm/raarmgas.pas
U compiler/arm/armatts.inc
U compiler/arm/cgcpu.pas
U compiler/arm/armins.dat
U compiler/arm/rgcpu.pas
U compiler/arm/cpubase.pas
U compiler/arm/agarmgas.pas
U compiler/arm/cpuinfo.pas
U compiler/arm/armop.inc
U compiler/arm/narmadd.pas
U compiler/arm/aoptcpu.pas
U compiler/arm/armatt.inc
U compiler/arm/aasmcpu.pas
U compiler/systems/t_embed.pas
U compiler/psub.pas
U compiler/options.pas
git-svn-id: trunk@13801 -
alignment for each memory reference (mantis #12137, and
test/packages/fcl-registry/tregistry1.pp on sparc). This also
enables better code generation for packed records in many cases.
o several changes were made to the compiler to minimise the chances
of accidentally forgetting to set the alignment of memory references
in the future:
- reference_reset*() now has an extra alignment parameter
- location_reset() can now only be used for non LOC_(C)REFERENCE,
use location_reset_ref() for those (split the tloc enum so the
compiler can catch errors using range checking)
git-svn-id: trunk@12719 -
* symtables based on TFPHashObjectList and TFPObjectList
* rename torddef.typ to torddef.ordtype
* rename tfloatdef.typ to tfloatdef.floattype
* rename tdef.deftype to tdef.typ
* remove obsolete browser code, browcol is kept so the ide
can still be compiled
git-svn-id: trunk@5192 -
