constant is > high(longint), because then it must be loaded into a register
first since such values cannot be encoded directly in non-mov x86-64
instructions (mantis #17836)
git-svn-id: trunk@16305 -
the IInterface implementation to be XPCom-compatible
--- Merging r15997 through r16179 into '.':
U rtl/inc/variants.pp
U rtl/inc/objpash.inc
U rtl/inc/objpas.inc
U rtl/objpas/classes/persist.inc
U rtl/objpas/classes/compon.inc
U rtl/objpas/classes/classesh.inc
A tests/test/tconstref1.pp
A tests/test/tconstref2.pp
A tests/test/tconstref3.pp
U tests/test/tinterface4.pp
A tests/test/tconstref4.pp
U tests/webtbs/tw10897.pp
U tests/webtbs/tw4086.pp
U tests/webtbs/tw15363.pp
U tests/webtbs/tw2177.pp
U tests/webtbs/tw16592.pp
U tests/tbs/tb0546.pp
U compiler/sparc/cpupara.pas
U compiler/i386/cpupara.pas
U compiler/pdecsub.pas
U compiler/symdef.pas
U compiler/powerpc/cpupara.pas
U compiler/avr/cpupara.pas
U compiler/browcol.pas
U compiler/defcmp.pas
U compiler/powerpc64/cpupara.pas
U compiler/ncgrtti.pas
U compiler/x86_64/cpupara.pas
U compiler/opttail.pas
U compiler/htypechk.pas
U compiler/tokens.pas
U compiler/objcutil.pas
U compiler/ncal.pas
U compiler/symtable.pas
U compiler/symsym.pas
U compiler/m68k/cpupara.pas
U compiler/regvars.pas
U compiler/arm/cpupara.pas
U compiler/symconst.pas
U compiler/mips/cpupara.pas
U compiler/paramgr.pas
U compiler/psub.pas
U compiler/pdecvar.pas
U compiler/dbgstabs.pas
U compiler/options.pas
U packages/fcl-fpcunit/src/testutils.pp
git-svn-id: trunk@16180 -
* disallow pushfd/popfd for x86_64 (mantis #14862)
* fixed assembling popfq with the internal assembler (it needs a rex.w
prefisx, while pushfq doesn't)
* changed the default opcode size of pushf/popf/pusha/popa in
{$asmmode intel} from "native size" to 16 bit (compatible with Intel
manuals and Kylix; in AT&T mode, the default size for those operations
remains the native one)
* changed pushf/popf in rtl/i386/* into pushfd/popfd because of the
previous change
git-svn-id: trunk@15546 -
x86-64 platforms (except for win64, which uses another ABI and which
already complied to it) + test
* fixed returning records containing 1 single or double field on darwin/i386,
these have to be returned via ST0 instead of as a regular record
* added support for LOC_FPUREGISTER and LOC_MMREGISTER in several places
where they can now occur due to the previous two changes
* made a few internalerrors unique
git-svn-id: trunk@15368 -
represent complex locations (required for full x86-64 ABI support,
which is not yet implemented) -> lots of special result handling
code has been removed and replaced by the parameter handling
routines
+ added support for composite parameters (and hence function
results) to tcg.a_load_ref_cgpara() (so it can be used for
handling, e.g., 64 bit parameters on 32 bit platforms)
* the above fixed writing past the end of allocated memory when
handling records returned in registers on x86-64 whose size is
not a multiple of 8 bytes (mantis #16357)
- removed the x86-64 and PPC specific versions of a_load_ref_cgpara(),
as they are now handled correctly by the generic version
* moved the responsibility of allocating tcgpara cpu registers
(using paramanager.allocparaloc()) from the callers of
cg.a_load*_cgpara() to the cg.a_load*_cgpara() methods
themselves (so the register allocation can be done efficiently
when dealing with function results)
* for the above, renamed paramanager.alloc/freeparaloc() to
paramanager.alloc/freecgpara(), and use paramanager.allocparaloc()
to allocate individual pcgparalocations instead
* fixed the register size of SSE2 function result registers for
x86-64 (when used for floating point), which results in removing
a few superfluous "movs? %xmm0,%xmm0" instructions
* fixed compilation of paramanagers of avr, m68k and mips after r13695
and also updated them for these new changes
git-svn-id: trunk@15350 -
properties/behaviour of the equivalent of Extended in C (i.e., to
"long double" on i386 and x86_64 platforms that support a 10 byte
long double, and to "double" elsewhere)
git-svn-id: trunk@14912 -
+ RTL support:
o VFP exceptions are disabled by default on Darwin,
because they cause kernel panics on iPhoneOS 2.2.1 at least
o all denormals are truncated to 0 on Darwin, because disabling
that also causes kernel panics on iPhoneOS 2.2.1 (probably
because otherwise denormals can also cause exceptions)
* set softfloat rounding mode correctly for non-wince/darwin/vfp
targets
+ compiler support: only half the number of single precision
registers is available due to limitations of the register
allocator
+ added a number of comments about why the stackframe on ARM is
set up the way it is by the compiler
+ added regtype and subregtype info to regsets, because they're
also used for VFP registers (+ support in assembler reader)
+ various generic support routines for dealing with floating point
values located in integer registers that have to be transferred to
mm registers (needed for VFP)
* renamed use_sse() to use_vectorfpu() and also use it for
ARM/vfp support
o only superficially tested for Linux (compiler compiled with -Cpvfpv6
-Cfvfpv2 works on a Cortex-A8, no testsuite run performed -- at least
the fpu exception handler still needs to be implemented), Darwin has
been tested more thoroughly
+ added ARMv6 cpu type and made it default for Darwin/ARM
+ ARMv6+ implementations of atomic operations using ldrex/strex
* don't use r9 on Darwin/ARM, as it's reserved under certain
circumstances (don't know yet which ones)
* changed C-test object files for ARM/Darwin to ARMv6 versions
* check in assembler reader that regsets are not empty, because
instructions with a regset operand have undefined behaviour in that
case
* fixed resultdef of tarmtypeconvnode.first_int_to_real in case of
int64->single type conversion
* fixed constant pool locations in case 64 bit constants are generated,
and/or when vfp instructions with limited reach are present
WARNING: when using VFP on an ARMv6 or later cpu, you *must* compile all
code with -Cparmv6 (or higher), or you will get crashes. The reason is
that storing/restoring multiple VFP registers must happen using
different instructions on pre/post-ARMv6.
git-svn-id: trunk@14317 -
-- Zusammenführen der Unterschiede zwischen Projektarchiv-URLs in ».«:
U rtl/arm/setjump.inc
A rtl/arm/thumb2.inc
U rtl/arm/divide.inc
A rtl/embedded/arm/stm32f103.pp
U rtl/inc/system.inc
U compiler/alpha/cgcpu.pas
U compiler/sparc/cgcpu.pas
U compiler/i386/cgcpu.pas
U compiler/ncgld.pas
U compiler/powerpc/cgcpu.pas
U compiler/avr/cgcpu.pas
U compiler/aggas.pas
U compiler/powerpc64/cgcpu.pas
U compiler/x86_64/cgcpu.pas
U compiler/cgobj.pas
U compiler/psystem.pas
U compiler/aasmtai.pas
U compiler/m68k/cgcpu.pas
U compiler/ncgutil.pas
U compiler/rautils.pas
U compiler/arm/raarmgas.pas
U compiler/arm/armatts.inc
U compiler/arm/cgcpu.pas
U compiler/arm/armins.dat
U compiler/arm/rgcpu.pas
U compiler/arm/cpubase.pas
U compiler/arm/agarmgas.pas
U compiler/arm/cpuinfo.pas
U compiler/arm/armop.inc
U compiler/arm/narmadd.pas
U compiler/arm/aoptcpu.pas
U compiler/arm/armatt.inc
U compiler/arm/aasmcpu.pas
U compiler/systems/t_embed.pas
U compiler/psub.pas
U compiler/options.pas
git-svn-id: trunk@13801 -
* the objc unit links against the Foundation instead of against the Cocoa
framework, and inludes an interface to either the fragile or non-fragile
obj-c run time depending on the target platform
+ support for the non-fragile Objective-C runtime/ABI, as used on Mac OS X
for ARM (iPhone) 64 bit (PowerPC/64, x86_64) -- all these targets now
are now also supported for the objectivec1 modeswitch
+ support for private_extern symbol bindings, required for the above
* mark objcclasses that are declared in the implementation section of a
unit as "hidden" (not sure what the effect is, since the Objective-C
runtime does not seem to do anything with this flag)
* enabled all obj-c tests for the newly supported platforms
git-svn-id: branches/objc@13763 -
forced to something else by the compiler (internal rtl functions etc),
necessary for the objc branch
* fixed adding all used function result registers to the list of
registers that may need to be saved before a function call
git-svn-id: trunk@13695 -
depend on that (and correct a number of cases where this was wrong)
* set the correct subreg type for xmm x86_64 parameter registers
(resolved mantis #14067)
git-svn-id: trunk@13410 -
alignment for each memory reference (mantis #12137, and
test/packages/fcl-registry/tregistry1.pp on sparc). This also
enables better code generation for packed records in many cases.
o several changes were made to the compiler to minimise the chances
of accidentally forgetting to set the alignment of memory references
in the future:
- reference_reset*() now has an extra alignment parameter
- location_reset() can now only be used for non LOC_(C)REFERENCE,
use location_reset_ref() for those (split the tloc enum so the
compiler can catch errors using range checking)
git-svn-id: trunk@12719 -
the syntax is exactly the same as for "external", except for
the keyword. It is currently only active for Darwin targets.
It should also work at least for Linux targets, but only with
the GNU assembler (which is why it is not activated there)
+ test for this functionality
git-svn-id: trunk@12009 -
a) cpu64bitaddr, which means that we are generating a compiler which
will generate code for targets with a 64 bit address space/abi
b) cpu64bitalu, which means that we are generating a compiler which
will generate code for a cpu with support for 64 bit integer
operations (possibly running in a 32 bit address space, depending
on the cpu64bitaddr define)
All cpus which had cpu64bit set now have both the above defines set,
and none of the 32 bit cpus have cpu64bitalu set (and none will
compile with it currently)
+ pint and puint types, similar to aint/aword (not pword because that
that conflicts with pword=^word)
* several changes from aint/aword to pint/pword
* some changes of tcgsize2size[OS_INT] to sizeof(pint)
git-svn-id: trunk@10320 -
