so that they can still be freed after the reference has been changed
(e.g. in case of array indexing or record field accesses) (mantis #33628)
git-svn-id: trunk@38814 -
o separate information for reading and writing, because e.g. in a
try-block, only the writes to local variables and parameters are
volatile (they have to be committed immediately in case the next
instruction causes an exception)
o for now, only references to absolute memory addresses are marked
as volatile
o the volatily information is (should be) properly maintained throughout
all code generators for all archictures with this patch
o no optimizers or other compiler infrastructure uses the volatility
information yet
o this functionality is not (yet) exposed at the language level, it
is only for internal code generator use right now
git-svn-id: trunk@34996 -
procedure node_change_local_switch(p : tnode;cs : tlocalswitch;enable : boolean);
to add/remove cs local switch from all p tnode tree localsettings.
modify second_prefetch implementation in arm, ppcgen and x86 subdirectories
to use node_change_local_settings to temporarily disabled
checkpointer local switch, as prefetch is allowed even on unaccessible addresses.
(previous code was buggy because I frogot that each node has it own localswitches).
git-svn-id: trunk@34576 -
something without a location at all; it's a hint/optional operation,
so if there's nothing to prefetch just don't do anything
(mantis #27811)
git-svn-id: trunk@30502 -
Switched codegeneration of VFPv2 and VFPv3 to use UAL mnemonics and syntax.
Updated VFP code in RTL to use UAL syntax too.
Added preliminary ELF support for ARM.
Added support for linking of WinCE COFF files. Should work for with a standard ARMv4-I target.
git-svn-id: branches/laksen/armiw@29247 -
Background: these operations are defined as flipping or clearing the upper bit of number, respectively, and never result in precision loss or raise floating-point exceptions.
git-svn-id: trunk@27411 -
This code will generate the following sequence on arm:
r1=dst
r0=src
movs r1, r0
rsbmi r1, r0, #0
movs will set the N-flag when the MSB of r0 is set, if it is set, rsb
will calculate dst:=0-src;
git-svn-id: trunk@21678 -
o new eabihf (hard float) abi
o vfpv3_d16 variant of VFP (default variant used by EABI assemblers: VFPv3
with only 16 double registers instead of 32) and pass it to GNU as
o make the odd numbered single precision floating point VFP registers
available for explicit allocation for use by the calling convention
* fixed copy/paste error in stdname of S30 register
-> use -dFPC_ARMHF to create an ARM eabi hard float compiler
(mantis #21554)
git-svn-id: trunk@20660 -
+ RTL support:
o VFP exceptions are disabled by default on Darwin,
because they cause kernel panics on iPhoneOS 2.2.1 at least
o all denormals are truncated to 0 on Darwin, because disabling
that also causes kernel panics on iPhoneOS 2.2.1 (probably
because otherwise denormals can also cause exceptions)
* set softfloat rounding mode correctly for non-wince/darwin/vfp
targets
+ compiler support: only half the number of single precision
registers is available due to limitations of the register
allocator
+ added a number of comments about why the stackframe on ARM is
set up the way it is by the compiler
+ added regtype and subregtype info to regsets, because they're
also used for VFP registers (+ support in assembler reader)
+ various generic support routines for dealing with floating point
values located in integer registers that have to be transferred to
mm registers (needed for VFP)
* renamed use_sse() to use_vectorfpu() and also use it for
ARM/vfp support
o only superficially tested for Linux (compiler compiled with -Cpvfpv6
-Cfvfpv2 works on a Cortex-A8, no testsuite run performed -- at least
the fpu exception handler still needs to be implemented), Darwin has
been tested more thoroughly
+ added ARMv6 cpu type and made it default for Darwin/ARM
+ ARMv6+ implementations of atomic operations using ldrex/strex
* don't use r9 on Darwin/ARM, as it's reserved under certain
circumstances (don't know yet which ones)
* changed C-test object files for ARM/Darwin to ARMv6 versions
* check in assembler reader that regsets are not empty, because
instructions with a regset operand have undefined behaviour in that
case
* fixed resultdef of tarmtypeconvnode.first_int_to_real in case of
int64->single type conversion
* fixed constant pool locations in case 64 bit constants are generated,
and/or when vfp instructions with limited reach are present
WARNING: when using VFP on an ARMv6 or later cpu, you *must* compile all
code with -Cparmv6 (or higher), or you will get crashes. The reason is
that storing/restoring multiple VFP registers must happen using
different instructions on pre/post-ARMv6.
git-svn-id: trunk@14317 -
alignment for each memory reference (mantis #12137, and
test/packages/fcl-registry/tregistry1.pp on sparc). This also
enables better code generation for packed records in many cases.
o several changes were made to the compiler to minimise the chances
of accidentally forgetting to set the alignment of memory references
in the future:
- reference_reset*() now has an extra alignment parameter
- location_reset() can now only be used for non LOC_(C)REFERENCE,
use location_reset_ref() for those (split the tloc enum so the
compiler can catch errors using range checking)
git-svn-id: trunk@12719 -
* small cleanups of unused variables in firstpass
* node_resources_fpu() created to get an approximation of the
required fpu registers
* for the moment use node_complexity in the CG until the
node_resource_int() is created
git-svn-id: trunk@8655 -
