so that they can still be freed after the reference has been changed
(e.g. in case of array indexing or record field accesses) (mantis #33628)
git-svn-id: trunk@38814 -
o separate information for reading and writing, because e.g. in a
try-block, only the writes to local variables and parameters are
volatile (they have to be committed immediately in case the next
instruction causes an exception)
o for now, only references to absolute memory addresses are marked
as volatile
o the volatily information is (should be) properly maintained throughout
all code generators for all archictures with this patch
o no optimizers or other compiler infrastructure uses the volatility
information yet
o this functionality is not (yet) exposed at the language level, it
is only for internal code generator use right now
git-svn-id: trunk@34996 -
do_spill_replace routines, will be necessary by llvm register
allocator to determine the tdef corresponding to that register
* replaced uses of taicpu with tai_cpu_abstract_sym in the register
allocator so that it can work both with taicpu and taillvm instructions
git-svn-id: branches/hlcgllvm@26043 -
Create preliminary Thumb-2 PeepHoleOptPass2 code, hacked together from the ARM mode code
Added a number of simple size optimizations for common Thumb-2 instructions
git-svn-id: branches/laksen/arm-embedded@22590 -
Fix problem with loading of condition operand for IT instructions
Properly split IT blocks when register allocator tries to spill inside a block.
git-svn-id: branches/laksen/arm-embedded@22582 -
ARM can not reference an arbitrary offset so it needs some special
handling if the offset goes beyond abs(4095).
The code for do_spill_read and do_spill written used to be very similar.
I've partially factored out the code into spilling_create_load_store.
The former code loaded the offset from a constant pool, which is a waste
of memory-bandwidth and cache lines. The new code tries to find a way to
adjust the baseregister so the memory location can be reached more
easily, this allows us to handle at least +-1MB with just a single
additional ADD or SUB instruction. If that fails we'll resort to the normal
constant loading code, which on it's own will fallback to loading the
constant from a constant-pool.
So instead of:
ldr r1, =16388
ldr r0, [r13, r1]
which will at least uses 4 cycles (2 Instruction cycles + 2 stall
cycles) on most cores.
We try to generate:
add r1, r13, #16384
ldr r0, [r1, #4]
which most armv5+ cores will execute in 2 cycles. We'll also save on
DCache usage.
git-svn-id: trunk@21889 -
* generate add.w instead of add for thumb-2 in case one of the registers
is > r8
* add register interferences for the "add" instruction so the register
allocator can detect invalid instruction forms (even for assembler code)
* fixed error in thumb2.inc detected by the previous change
git-svn-id: trunk@16633 -
+ RTL support:
o VFP exceptions are disabled by default on Darwin,
because they cause kernel panics on iPhoneOS 2.2.1 at least
o all denormals are truncated to 0 on Darwin, because disabling
that also causes kernel panics on iPhoneOS 2.2.1 (probably
because otherwise denormals can also cause exceptions)
* set softfloat rounding mode correctly for non-wince/darwin/vfp
targets
+ compiler support: only half the number of single precision
registers is available due to limitations of the register
allocator
+ added a number of comments about why the stackframe on ARM is
set up the way it is by the compiler
+ added regtype and subregtype info to regsets, because they're
also used for VFP registers (+ support in assembler reader)
+ various generic support routines for dealing with floating point
values located in integer registers that have to be transferred to
mm registers (needed for VFP)
* renamed use_sse() to use_vectorfpu() and also use it for
ARM/vfp support
o only superficially tested for Linux (compiler compiled with -Cpvfpv6
-Cfvfpv2 works on a Cortex-A8, no testsuite run performed -- at least
the fpu exception handler still needs to be implemented), Darwin has
been tested more thoroughly
+ added ARMv6 cpu type and made it default for Darwin/ARM
+ ARMv6+ implementations of atomic operations using ldrex/strex
* don't use r9 on Darwin/ARM, as it's reserved under certain
circumstances (don't know yet which ones)
* changed C-test object files for ARM/Darwin to ARMv6 versions
* check in assembler reader that regsets are not empty, because
instructions with a regset operand have undefined behaviour in that
case
* fixed resultdef of tarmtypeconvnode.first_int_to_real in case of
int64->single type conversion
* fixed constant pool locations in case 64 bit constants are generated,
and/or when vfp instructions with limited reach are present
WARNING: when using VFP on an ARMv6 or later cpu, you *must* compile all
code with -Cparmv6 (or higher), or you will get crashes. The reason is
that storing/restoring multiple VFP registers must happen using
different instructions on pre/post-ARMv6.
git-svn-id: trunk@14317 -
-- Zusammenführen der Unterschiede zwischen Projektarchiv-URLs in ».«:
U rtl/arm/setjump.inc
A rtl/arm/thumb2.inc
U rtl/arm/divide.inc
A rtl/embedded/arm/stm32f103.pp
U rtl/inc/system.inc
U compiler/alpha/cgcpu.pas
U compiler/sparc/cgcpu.pas
U compiler/i386/cgcpu.pas
U compiler/ncgld.pas
U compiler/powerpc/cgcpu.pas
U compiler/avr/cgcpu.pas
U compiler/aggas.pas
U compiler/powerpc64/cgcpu.pas
U compiler/x86_64/cgcpu.pas
U compiler/cgobj.pas
U compiler/psystem.pas
U compiler/aasmtai.pas
U compiler/m68k/cgcpu.pas
U compiler/ncgutil.pas
U compiler/rautils.pas
U compiler/arm/raarmgas.pas
U compiler/arm/armatts.inc
U compiler/arm/cgcpu.pas
U compiler/arm/armins.dat
U compiler/arm/rgcpu.pas
U compiler/arm/cpubase.pas
U compiler/arm/agarmgas.pas
U compiler/arm/cpuinfo.pas
U compiler/arm/armop.inc
U compiler/arm/narmadd.pas
U compiler/arm/aoptcpu.pas
U compiler/arm/armatt.inc
U compiler/arm/aasmcpu.pas
U compiler/systems/t_embed.pas
U compiler/psub.pas
U compiler/options.pas
git-svn-id: trunk@13801 -
alignment for each memory reference (mantis #12137, and
test/packages/fcl-registry/tregistry1.pp on sparc). This also
enables better code generation for packed records in many cases.
o several changes were made to the compiler to minimise the chances
of accidentally forgetting to set the alignment of memory references
in the future:
- reference_reset*() now has an extra alignment parameter
- location_reset() can now only be used for non LOC_(C)REFERENCE,
use location_reset_ref() for those (split the tloc enum so the
compiler can catch errors using range checking)
git-svn-id: trunk@12719 -
