TRegNameTable is defined in compiler/rgbase.pas and is an array of
strings, limited to the maximum length of the used register names.
r22792 added a long register name but did not scale the string-size
enough, resulting in the compiler built breaking for arm.
git-svn-id: trunk@22817 -
Add simple Mul+Sub/Mul+Add into MLS/MLA optimizations
Fix some other small issues in the optimizer
Implement Interlocked* functions with proper use of LDREX/STREX
git-svn-id: branches/laksen/arm-embedded@22801 -
Create preliminary Thumb-2 PeepHoleOptPass2 code, hacked together from the ARM mode code
Added a number of simple size optimizations for common Thumb-2 instructions
git-svn-id: branches/laksen/arm-embedded@22590 -
and add usermode parsing of LDM/STM ops
This patch basically extends the ARM assembly reader a bit to properly parse CPSR and
SPSR flags for the MSR opcode, and allows the reader to understand
the ^ modifer for register lists for STMxx and LDMxx.
Previously the following combinations weren't possible in straight assembler:
MRS R0, CPSR
MRS R0, SPSR
MSR CPSR_CX, R0
LDMIA SP, {R0-R15}^
etc..
git-svn-id: trunk@22502 -
It is the same as the normal MatchInstruction function but supports to
be called with a set of TAsmOps instead of a single op.
git-svn-id: trunk@22231 -
This functions tries to split up a 32-bit value into two shifter
constants. This approach finds a broader range for two shifter constant
combinations.
git-svn-id: trunk@21645 -
RS_INVALID superregister (instead of sometimes RS_NO and sometimes
RS_INVALID)
* check for RS_INVALID in tcg.g_save_registers() and ignore such entries
git-svn-id: trunk@21622 -
Inline a couple of small functions of the ARM-Compiler
These small changes improved overall compile times of the fpc suite by
about 2-3% running on an 1.2GHz Kirkwood.
git-svn-id: trunk@21312 -
* Introduce MatchInstruction and MatchOperand
MatchInstruction allows to match an instruction by condition and
oppostfix. MatchOperand checks if an operand is a register and matches
another operand. In the future this could be overloaded with other
versions not only accepting TRegister.
* Optimize cmp,moveq,movne sequence on ARM
This patch implements an peephole optimizer for the following sequence:
cmp reg,const1
movne reg,const2
moveq reg,const1
* Small improvements to the ARM peephole optimizer
Most instructions in the ARM ISA have taicpu(p).oper[0]^.typ = top_reg
as the only option, so there is no need to check for it if we're
looking at those instructions.
* Remove redundant mov instructions on ARM
This is an addition to the ARM PeepHole Optimizer.
It folds code like this:
mov reg1, reg2
add reg1, reg1, (const|reg)
git-svn-id: trunk@21024 -
always points to the previous r7 on the stack (with the saved return
address coming right after it) so that the debugger and crashreporter
can use it for backtraces as specified in the ABI
o changed NR_FRAME_POINTER_REG and RS_FRAME_POINTER_REG from a symbolic
into a typed constant, and added a new method to tprocinfo that can
be used to initialze it (so it can be inited to r7/r11 depending on
the target platform)
* allow using r9 on Darwin, it was only used by the system on iOS up to
2.x, which we no longer support
* prefer using r9 and r12 before r4..r11 on Darwin, because they are
volatile and hence do not have to be saved
git-svn-id: trunk@20661 -
o new eabihf (hard float) abi
o vfpv3_d16 variant of VFP (default variant used by EABI assemblers: VFPv3
with only 16 double registers instead of 32) and pass it to GNU as
o make the odd numbered single precision floating point VFP registers
available for explicit allocation for use by the calling convention
* fixed copy/paste error in stdname of S30 register
-> use -dFPC_ARMHF to create an ARM eabi hard float compiler
(mantis #21554)
git-svn-id: trunk@20660 -
+ RTL support:
o VFP exceptions are disabled by default on Darwin,
because they cause kernel panics on iPhoneOS 2.2.1 at least
o all denormals are truncated to 0 on Darwin, because disabling
that also causes kernel panics on iPhoneOS 2.2.1 (probably
because otherwise denormals can also cause exceptions)
* set softfloat rounding mode correctly for non-wince/darwin/vfp
targets
+ compiler support: only half the number of single precision
registers is available due to limitations of the register
allocator
+ added a number of comments about why the stackframe on ARM is
set up the way it is by the compiler
+ added regtype and subregtype info to regsets, because they're
also used for VFP registers (+ support in assembler reader)
+ various generic support routines for dealing with floating point
values located in integer registers that have to be transferred to
mm registers (needed for VFP)
* renamed use_sse() to use_vectorfpu() and also use it for
ARM/vfp support
o only superficially tested for Linux (compiler compiled with -Cpvfpv6
-Cfvfpv2 works on a Cortex-A8, no testsuite run performed -- at least
the fpu exception handler still needs to be implemented), Darwin has
been tested more thoroughly
+ added ARMv6 cpu type and made it default for Darwin/ARM
+ ARMv6+ implementations of atomic operations using ldrex/strex
* don't use r9 on Darwin/ARM, as it's reserved under certain
circumstances (don't know yet which ones)
* changed C-test object files for ARM/Darwin to ARMv6 versions
* check in assembler reader that regsets are not empty, because
instructions with a regset operand have undefined behaviour in that
case
* fixed resultdef of tarmtypeconvnode.first_int_to_real in case of
int64->single type conversion
* fixed constant pool locations in case 64 bit constants are generated,
and/or when vfp instructions with limited reach are present
WARNING: when using VFP on an ARMv6 or later cpu, you *must* compile all
code with -Cparmv6 (or higher), or you will get crashes. The reason is
that storing/restoring multiple VFP registers must happen using
different instructions on pre/post-ARMv6.
git-svn-id: trunk@14317 -
-- Zusammenführen der Unterschiede zwischen Projektarchiv-URLs in ».«:
U rtl/arm/setjump.inc
A rtl/arm/thumb2.inc
U rtl/arm/divide.inc
A rtl/embedded/arm/stm32f103.pp
U rtl/inc/system.inc
U compiler/alpha/cgcpu.pas
U compiler/sparc/cgcpu.pas
U compiler/i386/cgcpu.pas
U compiler/ncgld.pas
U compiler/powerpc/cgcpu.pas
U compiler/avr/cgcpu.pas
U compiler/aggas.pas
U compiler/powerpc64/cgcpu.pas
U compiler/x86_64/cgcpu.pas
U compiler/cgobj.pas
U compiler/psystem.pas
U compiler/aasmtai.pas
U compiler/m68k/cgcpu.pas
U compiler/ncgutil.pas
U compiler/rautils.pas
U compiler/arm/raarmgas.pas
U compiler/arm/armatts.inc
U compiler/arm/cgcpu.pas
U compiler/arm/armins.dat
U compiler/arm/rgcpu.pas
U compiler/arm/cpubase.pas
U compiler/arm/agarmgas.pas
U compiler/arm/cpuinfo.pas
U compiler/arm/armop.inc
U compiler/arm/narmadd.pas
U compiler/arm/aoptcpu.pas
U compiler/arm/armatt.inc
U compiler/arm/aasmcpu.pas
U compiler/systems/t_embed.pas
U compiler/psub.pas
U compiler/options.pas
git-svn-id: trunk@13801 -
depend on that (and correct a number of cases where this was wrong)
* set the correct subreg type for xmm x86_64 parameter registers
(resolved mantis #14067)
git-svn-id: trunk@13410 -
was not being initialised -> getfinaldestination always failed, which
caused wrong optimizations in some cases)
* changed the inverse_cond into a function, because tasmcond is a record
on ppc
+ added a compare_conditions() function for the same reason
