Precisize rules for selection of thumb instructions.
Add short-cut notation support for most simple Thumb2 instructions ( add r1,#4 instead of add r1,r1,#4 ).
git-svn-id: branches/laksen/armiw@29343 -
Move ThumbFunc flag from section to symbol.
Make .w forms optional the other way around. If .w is explicitly put on an instruction the assembler should always chose a wide form.
git-svn-id: branches/laksen/armiw@29341 -
Fixed bug in Mov instruction.
Added initial scanning of IT/LastInIT detection for proper instruction selection.
Disabled "wide" format flag detection again for now.
git-svn-id: branches/laksen/armiw@29338 -
Fixed a bunch of instruction encodings by comparing bulks of handwritten tests to binutils assembled versions.
Fixed emission of regsets of S and D registers above 15.
Fixed assembler reader for RRX shiftmode.
There can be a size postfix after a condition code in UAL assembler syntax. This has been added to the assembler reader.
git-svn-id: branches/laksen/armiw@29277 -
Add some VFP registers.
Rebuilt tables.
Added a lot of VFPv3 and Advanced SIMD(not supported yet) oppostfixes.
Implemented code in aasmcpu to generate binary code from the instructions. Only ARM32 supported so far.
git-svn-id: branches/laksen/armiw@29246 -
to free up space for more ait_* types in taitype (can't have
more than 32 because they have to fit in a small set)
o factored out writing of floating point numbers as an array of
byte in the external assemblers
git-svn-id: branches/hlcgllvm@28105 -
Add simple Mul+Sub/Mul+Add into MLS/MLA optimizations
Fix some other small issues in the optimizer
Implement Interlocked* functions with proper use of LDREX/STREX
git-svn-id: branches/laksen/arm-embedded@22801 -
Create preliminary Thumb-2 PeepHoleOptPass2 code, hacked together from the ARM mode code
Added a number of simple size optimizations for common Thumb-2 instructions
git-svn-id: branches/laksen/arm-embedded@22590 -
Fix problem with loading of condition operand for IT instructions
Properly split IT blocks when register allocator tries to spill inside a block.
git-svn-id: branches/laksen/arm-embedded@22582 -
and add usermode parsing of LDM/STM ops
This patch basically extends the ARM assembly reader a bit to properly parse CPSR and
SPSR flags for the MSR opcode, and allows the reader to understand
the ^ modifer for register lists for STMxx and LDMxx.
Previously the following combinations weren't possible in straight assembler:
MRS R0, CPSR
MRS R0, SPSR
MSR CPSR_CX, R0
LDMIA SP, {R0-R15}^
etc..
git-svn-id: trunk@22502 -
The old version did not check the S-Postfix for MOV, which results in
removing instructions like:
movs r0, r0
which breaks later flag usage.
git-svn-id: trunk@21676 -
* generate add.w instead of add for thumb-2 in case one of the registers
is > r8
* add register interferences for the "add" instruction so the register
allocator can detect invalid instruction forms (even for assembler code)
* fixed error in thumb2.inc detected by the previous change
git-svn-id: trunk@16633 -
solves the problem whereby an empty list could sometimes be inserted
after a jump table load (in case the jump table was larger than the
maximally allowed offset, and if there was a skipinstr between the
previous instruction and the jump table load) (mantis #17164)
git-svn-id: trunk@15831 -
+ RTL support:
o VFP exceptions are disabled by default on Darwin,
because they cause kernel panics on iPhoneOS 2.2.1 at least
o all denormals are truncated to 0 on Darwin, because disabling
that also causes kernel panics on iPhoneOS 2.2.1 (probably
because otherwise denormals can also cause exceptions)
* set softfloat rounding mode correctly for non-wince/darwin/vfp
targets
+ compiler support: only half the number of single precision
registers is available due to limitations of the register
allocator
+ added a number of comments about why the stackframe on ARM is
set up the way it is by the compiler
+ added regtype and subregtype info to regsets, because they're
also used for VFP registers (+ support in assembler reader)
+ various generic support routines for dealing with floating point
values located in integer registers that have to be transferred to
mm registers (needed for VFP)
* renamed use_sse() to use_vectorfpu() and also use it for
ARM/vfp support
o only superficially tested for Linux (compiler compiled with -Cpvfpv6
-Cfvfpv2 works on a Cortex-A8, no testsuite run performed -- at least
the fpu exception handler still needs to be implemented), Darwin has
been tested more thoroughly
+ added ARMv6 cpu type and made it default for Darwin/ARM
+ ARMv6+ implementations of atomic operations using ldrex/strex
* don't use r9 on Darwin/ARM, as it's reserved under certain
circumstances (don't know yet which ones)
* changed C-test object files for ARM/Darwin to ARMv6 versions
* check in assembler reader that regsets are not empty, because
instructions with a regset operand have undefined behaviour in that
case
* fixed resultdef of tarmtypeconvnode.first_int_to_real in case of
int64->single type conversion
* fixed constant pool locations in case 64 bit constants are generated,
and/or when vfp instructions with limited reach are present
WARNING: when using VFP on an ARMv6 or later cpu, you *must* compile all
code with -Cparmv6 (or higher), or you will get crashes. The reason is
that storing/restoring multiple VFP registers must happen using
different instructions on pre/post-ARMv6.
git-svn-id: trunk@14317 -
-- Zusammenführen der Unterschiede zwischen Projektarchiv-URLs in ».«:
U rtl/arm/setjump.inc
A rtl/arm/thumb2.inc
U rtl/arm/divide.inc
A rtl/embedded/arm/stm32f103.pp
U rtl/inc/system.inc
U compiler/alpha/cgcpu.pas
U compiler/sparc/cgcpu.pas
U compiler/i386/cgcpu.pas
U compiler/ncgld.pas
U compiler/powerpc/cgcpu.pas
U compiler/avr/cgcpu.pas
U compiler/aggas.pas
U compiler/powerpc64/cgcpu.pas
U compiler/x86_64/cgcpu.pas
U compiler/cgobj.pas
U compiler/psystem.pas
U compiler/aasmtai.pas
U compiler/m68k/cgcpu.pas
U compiler/ncgutil.pas
U compiler/rautils.pas
U compiler/arm/raarmgas.pas
U compiler/arm/armatts.inc
U compiler/arm/cgcpu.pas
U compiler/arm/armins.dat
U compiler/arm/rgcpu.pas
U compiler/arm/cpubase.pas
U compiler/arm/agarmgas.pas
U compiler/arm/cpuinfo.pas
U compiler/arm/armop.inc
U compiler/arm/narmadd.pas
U compiler/arm/aoptcpu.pas
U compiler/arm/armatt.inc
U compiler/arm/aasmcpu.pas
U compiler/systems/t_embed.pas
U compiler/psub.pas
U compiler/options.pas
git-svn-id: trunk@13801 -
* Suppressed 2 unreachable code warnings.
* Now x86 compiler compiles without warnings and notes! It will be great to keep such state in future...
git-svn-id: trunk@11455 -
a) cpu64bitaddr, which means that we are generating a compiler which
will generate code for targets with a 64 bit address space/abi
b) cpu64bitalu, which means that we are generating a compiler which
will generate code for a cpu with support for 64 bit integer
operations (possibly running in a 32 bit address space, depending
on the cpu64bitaddr define)
All cpus which had cpu64bit set now have both the above defines set,
and none of the 32 bit cpus have cpu64bitalu set (and none will
compile with it currently)
+ pint and puint types, similar to aint/aword (not pword because that
that conflicts with pword=^word)
* several changes from aint/aword to pint/pword
* some changes of tcgsize2size[OS_INT] to sizeof(pint)
git-svn-id: trunk@10320 -
from x86/aasmcpu to aasmtai and (new) aasmsym, so that when they're
finished they're available for all targets
* added dummy implementation of tai_cpu_abstract.pass1 and pass2 so there
are no more hundreds of warnings on non-x86 about constructing taicpu
instances with abstract methods
git-svn-id: trunk@5787 -
getjumplabel and added type para to getlabel for specific types
* moved lineinfo generation from assemble and aggas to dbgstabs
git-svn-id: trunk@1120 -
